Maxell MXSP-SB3000
Contents
1. 0000 STANDBY ENTER TV VOL TV CH LEARNING ZONE 1 Turn on or turn off the unit 2 HDMI Select an HDMI audio input source from HDMI 1 2 and 3 3 COAX Select COAXIAL source 4 OPT Select OPTICAL source 5 BT select bluetooth source 6 VOL Volume Adjust sound volume level 7 MUTE Mute or resume sound from the unit 8 BASS Select Bass boost level 1 2 or no Bass boost effect EN 7 Activate learning mode to setup commands from the TV remote control to control some TV functions 10 DIM Adjust brightness level of display panel 11 ARC Activate Audio Return Channel ARC function 12 LINE IN 1 2 Select LINE IN 1 source from RCA Select LINE IN 2 source from LINE IN 13 PAIR Pair with bluetooth enabled device 14 gt Il In Bluetooth mode Start or pause playback 15 ed gt gt I In Bluetooth mode Skip to previous next track 16 EQ Select a preset sound effect cinema soeech music sport standard 17 SRS Switch on or turn off SRS WOW HD effect Getting Started Prepare the Smart Remote Control The Smart Remote Control provided allows the unit to be operated from a distance e Even if the Smart Remote Control is operated within the effective range 6m remote control operation may be impossible if there are any obstacles between the unit and the remote control If the Smart Remote Control is operated near other products which gene2. program by connecting to the unit via LINE IN cable LINEIN Note You can also connect to your PC with LINE IN cable in the setup shown below EN 11 Connections Connect to a Bluetooth Device You can listen to music from a Bluetooth enable device via this player Pair the Bluetooth enabled devices The first time you connect your Bluetooth device to this player you need to pair your device to this player Note The operational range between this player and a Bluetooth device is approximately 8 meters Before you connect a Bluetooth device to this unit familiarize yourself with the Bluetooth capabilities of the device Compatibility with all Bluetooth devices is not guaranteed Any obstacle between this unit and a Bluetooth device can reduce the operational range Keep this player away from any other electronic device that may cause interference 1 Turn on the Bluetooth function on your device 2 Switch player s source to Bluetooth Display panel shows BT then show NO BT if there s no Bluetooth device connected 3 Press and hold PAIR button on remote control or ES on top of the unit to activate Bluetooth pairing mode display panel shows PAIRING 4 Search for Bluet
3. to exit the learning mode Red indicator will turn off immediately EN 14 Troubleshooting To keep the warranty valid never try to repair the system yourself If you encounter problems when using this unit check the following points before requesting for service Warranty void if case is opened AC power that the circuit is on LED is On Suddenly No sound Triggered auto off function e Turn the volume up of the source e g TV mp3 player etc and readjust the sound of the unit to trigger auto on function e See No Sound symptom above No sound speaker is connected to Cannot trigger auto on function e Increase the volume of the source input improperly connected e Substitute a known good power cable Blown fuse e Contact with your manufacturer for repairment No sound Speaker comes on Faulty cables and connections e Disconnect and re seat signal cables Make sure cables are plugged completely Replace suspected cable with a known good cable Noise or hiss heard at output Faulty Cables and connections Disconnect and re seat signal cables Make sure cables are plugged completely Replace suspected cable with a known good cable Noisy source device Disconnect the devices that are connected to your speaker one at a time If the noise goes away the problem is with the source or the connecting cable Hum or Buzz that increases or decreases Interference internally e Disconnect or mute the other channels when more than one s
4. use of this Product together with other devices e This Product is not intended for use in facilities and equipment which may affect human lives including medical equipment nuclear devices aerospace equipment and transport equipment as well in facilities and equipment which require a high degree of reliability Company shall not be held responsible for any accident resulting in personal injury or death or any fire accident that may occur due to failure of this Product when this Product is used in the control systems of those facilities and equipment Indicates that there is a possibility of causing death Warning or serious physical injury if this Product is erroneously handled Indicates that there is a a possibility of causing physical Caution injury or occurrence of physical damage if this Product is erroneously handled 1 Serious physical injury implies injuries such as loss of eyesight or injury burns electric shock bone fracture or poisoning that have subsequent complications and which require hospitalization or long term hospital visit for medical treatment 2 Physical injury implies injury burns and electric shock which do not require hospitalization or long term hospital visit for medical treatment A This symbol shows that the user needs to exercise caution while handling this Product to prevent fire explosion and heating The specific caution to be taken is written inside the symbo
5. Contents o WA PEO e 2 imponan Satety IMS IFUCTIONS isso E ATN NA 3 A a a i 6 Mtro AEEA 6 Smart Remote Control xx vsccincecarccatecusnenetdueseeddeenandaase diecedadohasduidaeuiaduaiawndaeiendaacdueioercanbnneendvense 7 Ele o AMD PPP E 8 Prepare ihe sman Remote CONTO duna da 8 Precautions Concerning Baltterles ooooconocconanonocononnnnnnococononononacocononnnnonanonicnoncnonananioss 8 CTO a E E ES 9 PISOS TN ON TOO rated A EE E 7 Connect to POWER caia 9 USD GM GL E E IAR NAN A AANE EAE E AE N E AAAA E A E A AE tert 9 CONNECT ele 9 Connect to a Bluetooth Device o oe ec eee ee cee cscceccncceccccesccuccecceccusecuccuccecesceuccscuscescesceuseateaes 12 Connect to an External Audio DEVICE sara naci 13 e 010 0 18 110 y PA Oe o An 14 TOM ONO eiee a o o N iets ear EEE EAEE EAE omega AE EE AEA 14 Adjust Volume Level usina ai iii 14 MUIS SOUNO SI 14 BASS BOOS eranen e E EE E ET E TE A EEE A tered eat EE A E ESR 14 SElECT SRS SOUNO eaa E te tpt a e a a a a 14 Program Smart Remote Control To COMMON TV noia cata iaa 14 THOS FO a a pantera ier edad 15 SS es e OO EI 16 What s in the Box INSTRUCTION MANUAL Main Unit Instruction Manual Smart Remote Control Maxell CR2025 lithium button battery included Line Cable Line Cable DOs and DON Ts Leaflet 3 5mm to 3 5mm RCA to RCA For TV Headphone Output For TV Line out Ge SL HDMI Cable Power Cab
6. DIS POON anna 1 1kHz 1W Audio Input Sensitivity Impedance LINE oo ceeeeccceeseececeeesesceeeeesceseeeeeses 600MV 47kO Frequency RESPONSE cs hccsassccssoanccaasiaaaanacasananaaasacasanaduanadnadsaaagaanasouanedeaaeanaaaaseanaaaaes 50Hz 20kKHz Unit Dimensions W x X D s cocino iria cianc iii 929 x 390 x 78mm NET WS Dia 8 4kg Speaker Front MSS OREA POR NOS O PU OE os ont teateac S 30 LSE Dha A I EE A 30W Woofer MIS E Ea E EE EIE EEE E E AE EA ant odes A EEE EEE E E 60 NOMS POWER 100W Remote Eto qa AO UA E PU OE O O mn A m A 309 Digital signal input output information DIGIT Sampl d TEQUEnOY usina ic A8kHz FH ASIII WONT ro A PCM Warranty 2 years Design and specifications are subject to change without notice EN 16
7. ayer s remote control to play music stored on the device 1 Pair your device with the player 2 Start play music via your device if it support A2DP 3 Use supplied remote control to control play if it support AVRCP To pause resume play press the button To skip to a track press the H 1 buttons EN 12 Connections Note SSS A m VOY might hear the sound over lapping from You can connect to your audio devices some of the suggestion connections To e g CD player to enjoy purely music via avoid this turn the volume of TV down to 0 the following conections or mute if HDMI IN OPTICAL O COAXIAL OPTICAL L AUDIO OUT R COAXIAL OPTICAL Auto on off function is applied in this unit Auto off is to facilitate people not to control the unit when no sound is playing in few minutes And when there are sounds input the unit will switch on automatically after few seconds For HDMI Auto on function will work with CEC only Warning If the volume of the TV or an external device via RCA or LINE IN is foo low the auto off function will be triggered When this situation happened for 2 5 minutes LED source light will flash slowly on the unit for the next 30 seconds and the unit will switch to standby mode Please turn up the volume of the input source not the unit
8. but e g TV or MP3 player etc slowly until it returns to normal mode To avoid the auto off being triggered unintentionally pre set the source volume higher and adjust the unit volume to a comfortable level EN 13 Basic Operation Turn On Off Turning the System ON OFF Press the button on the unit or remote control Note When turning the system on the system will continue in the mode was set last time Note Be sure to unplug the power cord from the outlet when the system is not in use for an extended period of time The unit will switch to standby mode when the audio cables are disconnected or when you turn off TV external device after several minutes Adjust Volume Level Either 1 Press the VOL button on the remote control or 2 Press 1 1 button on the unit to increase or decrease the volume level If the unit is connected to the TV headphone jack you can control the Volume Level using the TV remote control If the unit is connected to TV HDMI jack with CEC Customer Electronics Control function enabled The sound of the unit can be controlled by the TV remote control Mute Sound Press the MUTE button on the remote control to mute Press this button again or VOL VOL buttons on the remote control or P 1p on the unit to resume the sound Bass Boost Press BASS button on the remote control to turn on the bass Press this button again to switch to level 2 or to turn it off Selec
9. cable or D Coaxial output TV to Optical input unit via a Coaxial cable not supplied or E Optical output TV to Optical input unit via an Optical cable not supplied or Customer Electronics Control CEC function Please check the setting of your TV HDMI function to see whether CEC function is available If your TV has CEC function in HDMI Switch off the TV the unit will also switch off immediately Play your Blu ray player the unit and TV will switch on immediately Note CEC function can be varied by different TV brands and models Check the compatibility of CEC function on your TV Using Optical IN socket If your TV does not have HDMI sockets please follow the set up below o y eGo or Composite video AV equipment e g Blu ray Player EN 10 Connections a Connect Optical output source into the unit b Connect Video output of the AV equioment into the Video input of TV via either 1 Component connection Green Blue Red not supplied or 2 Composite connection Yellow not supplied Note You can listen to the TV program sound from connecting to the unit via LINE IN cable Using Coaxial socket If your TV does not hav
10. d HDMI IN 1 HDMI IN 2 or HDMI IN 3 socket on the unit EN 9 Connections b Connect another HDMI cable from the HDMI OUT socket on the unit to the HDMI IN socket on the TV Note If your TV has only a DVI connector connecting through a HDMI to DVI adapter is necessary Extra optical audio connection might be needed to complete this connection 2 Watching broadcasting TV program using TV supporting ARC a If you want to watch TV program and listen to the sound with this unit TV that supported HDMI Audio Return Channel ARC function do not need any extra connection b Use HDMI version 1 4 cable for connection c Connect to the HDMI ARC socket on TV HDMI ARC HDMI IN 3 Watching broadcasting TV program using TV do not support ARC If you want to watch TV programme and listen the sound with this unit but your TV does not support ARC function you will need an additional audio cable HDMI OPTICAL COAXIAL RCA LINE IN cable to connect from the audio output of the TV to the audio input of the unit E i A A B o e E O Co o o SE ST rca 0 E Srey ES van e 1 a Connect either A HDMI output TV to HDMI input 0 90 09 unit via an HDMI cable not supplied or B LINE OUT Headphone TV to LINE IN unit via LINE IN cable C RCA output TV to RCA input unit via RCA to RCA
11. e HDMI sockets please follow the set up below 000 VIDEO Y Pb Cb Pr Cr f f E LA Ly i i or H Composite video a D AV equipment i ONOHY S e g Blu ray Player Component video a Connect Coaxial output source into the unit b Connect Video output of the AV equioment into the Video input of TV via either 1 Component connection Green Blue Red not supplied or 2 Composite connection Yellow not supplied Note You can listen to the TV program sound from connecting to the unit via LINE IN cable Using RCA IN socket For audio devices that do not support HDMI or Optical output please follow the set up below VIDEO AV equipment e g DVD recorder a Connect Composite Video output of the AV equipment e g DVD recorder to Composite Video input on the TV b Connect Audio L R output of the AV equipment to the LINE IN or RCA input onto the unit Note You can listen to the TV program sound from connecting to the unit via LINE IN cable Using Line IN socket You can listen to the sound of the TV
12. ed on or pinched particularly at plugs convenience receptacles and the point where it exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped O This is CLASS Il apparatus with double insulation and no protective earth provided The mains plug is used as the disconnect device the disconnect device must remain readily operable EN 5 13 This apparatus is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the apparatus by a person responsible for their safety Children should be supervised to ensure that they do not play with the apparatus Never use the device unsupervised Switch off the device whenever you are not using it even if this only for a short while The apparatu
13. icine cosmetics or water near the Product They may break and get into the Product and cause fire or electric shock Do not insert any kind of metal or easily combustible object through the aperture It may cause fire or electric shock Do not block any ventilation openings It may get heated and cause fire Install in accordance with the manufacturer s instructions Do not put more than 50kg on top of this apparatus It may damage the apparatus Do not use a wrong power plug out of the 2 power cords provided for this apparatus It may damage the power plug and or the power socket lt may cause fire or electric shock Do not keep in a shaky place O The Product may fall and get damaged Don t Do not keep in a place where lampblack or steam falls It may cause fire or accident Do not keep in a place which is directly hit by cold air or a place which is extremely cold Dew may fall and cause short circuit or burnout Do not listen in high volume continuously for a long time Do not listen in high volume which causes ringing in the ears continuously for a long time It may damage hearing Do not raise the volume excessively from the beginning Sudden high volume may damage hearing Minimize the volume before playing Do not keep in an excessively hot place sush as radiators heaters stoves or other apparatus including amplifiers that produce heat The surface of the device or parts may get damaged and may a
14. l S This symbol implies restriction of an action while handling this Product The specific restriction is written inside or near the symbol OQ his symbol implies compulsion of an action based on the instructions The specific compulsion is written inside or near the symbol Warning To reduce the risk of electric shock do not expose this apparatus to moisture Warning The battery battery or batteries or battery pack must not be exposed to excessive heat such as sunshine fire or the like EN 3 Important Safety Instructions Do not repair modify or disassemble It may cause fire electric shock or injury The Company shall not be responsible for any physical damage caused by repairing modification or disassembly Also any repairing of a fault caused by repairing modification or disassembly by the user will be charged even if it happens during the warranty period Keep the Product Remote Control out of reach of children They may accidentally swallow the battery and cause choking and damage the stomach The cord may entangle around the child s body and cause suffocation If any accident occurs by any chance please consult a doctor immediately Do not use in a rainy or snowy place by the waterside or in the bathroom It may cause fire or electric shock Do not use if it is thundering It may cause fire or electric shock Do not keep a flower vase flowerpot cup or any container containing med
15. le EN 2 Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead AN symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the apparatus Reading the user s manual e The contents of this user s manual may be modified without any prior notification e The appearance and specifications may be partially modified without any prior notification e The Company shall not be responsible for any injury caused by fire earthquake or a third party as well as any injury that occur due to intentional or accidental mishandling or improper use by the customer e Company shall not be held responsible for any damages that may occur due to employment of a usage method not designated in the user s manual e Company shall not be held responsible for any damages that may occur due to malfunctioning of the Product resulting from the
16. lso cause fire Do not keep especially in a closed car in summer and in a place where sunlight directly falls or near a stove This may cause leakage of battery fluid Do not use in sandy beaches and sandy soil where sand can easily enter or in dusty locations It may cause burnout fire or accident Do not cover or wrap with a cloth or futon Heat may get generated and deform the Product or Product may catch fire Do not keep a cathode ray tube near it Spots may appear because of it Ensure to refer the user s manual to connect to A an external device Don t Connect to an external device after carefully reading this user s manual and the user s manual of the external device as well as after turning off the power Do not plug or unplug the power plug with wet S hands It may cause electric shock Insert the power plug completely and firmly into O the outlet socket Doni If the power plug is not inserted properly fire may occur due to electric shock or dust deposition Turn off power when repairing or if not going to be used for a long time and remove the power plug Hot adhering to this may cause electric shock or physical damage Caution EN 4 Important Safety Instructions Safety NAO OBR 0 N Read these instructions Keep these instructions Heed all warnings Follow all instructions Only use this product indoor Clean only with a dry cloth Protect the power cord from being walk
17. ooth device with your device 5 Select MXSP SB3000 in the pairing list 6 Enter 0000 when prompted for a keyword If necessary if the pairing succeeds display panel shows BT again 7 To disconnect connection turn off the Bluetooth function on your device or switch the player to other source Tip If there s a connection exist hold and press PAIR button on remote control or 3 on top of the unit for seconds will reactivate the pairing mode the connection will be interrupted lf there s no other Bluetooth device pair with this player in two minutes the player will recovery previous connection The player will also be disconnected when your device is moved beyond the operational range If you want to reconnect your device to this player place it within the operational range Ifthe device is moved beyond the operational range when it is brought back please check if the device is still connected with the player f they are connected display panel shows BT lf the connection is lost display panel shows NO BT follow the instruction above to pair your device to the player again Listen to music from Bluetooth device e f the connected Bluetooth device supports Advanced Audio Distribution Profile A2DP you can listen to the music stored on the device through the player e lf the device also supports Audio Video Remote Control Profile AVRCP profile you can use the pl
18. ource are to solve the problem inputting single to the unit at the same Faulty cable between source e Substitute a known good cable for the time equipment and unit suspected faulty cable Smart Remote control does not work No Low battery power e Remove the transparent film at the bottom of Smart Remote control Insert Replace remote control battery with a CR2025 battery The Unit does not responds to the No Low signal from remote control Reduce the distance between the remote control to the unit Smart Remote control and the unit Aim the Smart Remote control directly at the sensor on the front of the unit The unit resoonds but no sound Before you press any function button first select the correct source See Troubleshooting No Sound Symptom HDMI ARC CEC ERROR TV CEC function is not compatible Check the TV CEC function and No Sound or Have sound but with error with unit CEC function compatibility on TV user s manual message shown on TV Disable TV CEC ARC function Use other suggested connections HDMI ARC CEC ERROR TV CEC function is not partially Check the TV CEC function and Both TV and the unit has sound coming compatible with unit CEC function compatibility on TV user s manual out Select speaker option in TV manual to from the Unit only EN 15 Specifications General Power REQUIFEMENTS iniiinnnninana ni AC 220 240V 50 60Hz Output Power BCE QUES lt tia SOW x 2 o arate e o En PA 100W Tal EROTIC
19. rate infrared rays or if other remote control devices using infrared rays are used near the unit it may operate incorrectly Conversely the other products may operate incorrectly For First time use The unit has a pre installed lithium CR2025 battery Remove the protective tab to activate the remote control battery To Replace the Smart Remote Conirol Battery R gt A Press down the fip on the left B Pull out the battery tray and remove the old battery C Place a new CR2025 battery into the battery tray with correct polarity as indicated D Insert the tray back into the slot EN 8 Precautions Concerning Batteries When the Smart Remote Control is not to be used for a long time more than a month remove the battery from the Smart Remote Control to prevent it from leaking If the batteries leak wipe away the leakage inside the battery compartment and replace the batteries with new ones Do not use any batteries other than those specified Do not heat or disassemble batteries Never throw them in fire or water Do not carry or store batteries with other metallic objects Doing so could cause batteries to short circuit leak or explode Never recharge a battery unless it is confirmed to be a rechargeable type Connections Place TV on top Please read the DOs and DON Ts Leaflet provided for proper installation position of the unit Warning Please
20. s is not intended to be operated by means of an external timer or separate remote control system If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Do not immerse this product in liquid Identifying the Parts Main Unit Top View F y T Le Turn on this unit or switch to Power standby mode 2 Select a source 3Q Press this button to choose Bluetooth source Hold and press the button to Pair the bluetooth enabled device 4 wil In Bluetooth mode Start or pause playback 5 QQ Decrease or Increase sound volume level Front vew bow a 6 Light indicators 7 Display Panel Show the current status 8 IR Remote control sensor 9 5V 1A Charging Only Use this socket to charge your smartphone and tablet PC Rear View 10 HDMI IN Socket Total 3 HDMI connectors compatible with HDMI version 1 4 or below 11 HDMI OUT Socket 1 HDMI connector compatible with HDMI version 1 4 or below 12 AC Power Plug Connect a power cord 13 LINE IN Terminals Standard 3 5mm audio input jack 14 RCA Terminals Standard RCA audio input jack 15 Coaxial Terminals 1 Coaxial input jack 16 OPTICAL Terminals 1 Optical input jack EN 6 Identifying the Parts Smart Remote Control 9 LEARN
21. t SRS Sound Press SRS button on the remote control for 3 seconds to select SRS WOW HD effect Press this button again to cancel the effect Program Smart Remote Control to Control TV You can store a total of up to seven of your most frequently used TV functions in the TV learning zone of the Smart Remote Control This feature enables you to use only one remote control to operate the unit together with your TV The remote control codes of a TV are stored in the Smart Remote Control The available preset buttons are ON OFF FUNCTION CS ENTER TV VOL VOL TV CH CH NOTE During the learning process the normal remote control functions are disabled 1 Place the Smart Remote Control A within a 5mm 50mm distance from the TV remote control B pointer to pointer as shown above 2 Press and hold the LEARN button for 2 seconds to activate the learning mode A red indicator on the Smart Remote Control A will light up 3 Press one of the TV learning zone buttons on the Smart Remote Control A the red indicator flashes 4 Press the button on the TV remote control B that is to be stored on the Smart Remote Control A When the code is received successfully the red indicator will quickly flash for 3 times If the code is not successfully received the red indicator will keep on flashing 5 Repeat steps 3 4 to program more functions onto the Smart Remote Control A 6 Press the LEARN button to save the setting and
22. turn down the volume of the TV or other sources before connection Loud sound might be suddenly produced Connect to Power Caution Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit Risk of electric shock When you unplug the DC power always pull the plug from the socket Never pull the cord Ensure the correct power cord is matched the main power socket Using a wrong power cord might damage the power plug and the socket Connect the DC power cord to the DC socket on this unit the wall socket USB DC 5V Charge Connect a USB cable not supplied to USB Charging 5V 1A socket to charge your smartphone or tablet PC TS STANDBY 5V 1A Charging Only Connect to TV Using HDMI socket Connect HDMI High Definition Multimedia Interface DVI Digital Visual Interface or HDCP High bandwidth Digital Contents Protection compliant TVs through HDMI for the best picture quality This connection transmits both video and audio signals Note Some TVs do not support HDMI audio transmission HDMI OUT AV equipment e g Blu ray Player 1 Watch movie from blu ray player a Connect a HDMI cable to the HDMI OUT socket on the AV equipment an
Download Pdf Manuals
Related Search