Chief QMP1TB rack accessory
Contents
1. See Figure 2 Figure 2 4 Fasten the table top F to the table bracket assembly using six 10 x 5 8 Phillips wood screws L See Figure 3 Table bracket assembly Figure 3 Fasten the table top assembly to the cart stand using four 1 4 20 x 3 4 button head cap screws K through two array clamps inner B or two array clamps outer A See Figure 5 Table top assembly A or B x 2 B shown Back of column QMP1FB QMP1MB Figure 4 1 Installation Instructions Cable Management NOTE There are four cable tie holes in the table bracket Cable ties G may be added for cable management of keyboard cables mouse cables and other miscellaneous cables See Figure 5 yo top Cable tie holes Front view table top and bracket Figure 5 Installation Instructions QMP1T 1 Installation Instructions CHIEF raxess series Chief Manufacturing a products division of Milestone AV Technologies 8832 002049 Rev00 2011 Milestone AV Technologies a Duchossois Group Company www chiefmfg com 1 11 USA International Europe Asia Pacific gt Uu 8401 Eagle Creek Parkway Savage MN 55378 800 582 6480 952 894 6280 877 894 6918 952 894 6918 Fellenoord 130 5611 ZB E2. INDHOVEN The Netherlands 31 0 40 2668620 31 0 40 2668615 Office No 1 on 12 F Shatin Galleria 18 24 Shan Mei Street Fotan Shatin Hong Kong 852 2145 4099 852 2145 4477 FCONSUNERS
3. INSTALLATION INSTRUCTIONS Music Stand Table Top CHIEF QMP1T rexess series 1 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document Chief amp and Centris are registered trademarks of Milestone AV Technologies All rights reserved A IMPORTANT WARNINGS AND CAUTIONS WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions DIMENSIONS WARNING Failure to read thoroughly understand and follow all instructions can result in serious personal injury damage to equipment or voiding of factory warranty It i
4. oevendraaier Tournevis a pointe cruciforme Loosen Fastener Aflojar elemento de fijaci n Befestigungsteil l sen Desapertar fixador Allentare il fissaggio Bevestiging losdraaien Desserrez les fixations Hex Head Wrench Llave de cabeza hexagonal Sechskantschl ssel Chave de cabe a sextavada Chiave esagonale Zeskantsleutel Cl t te hexagonale 1 Installation Instructions TOOLS REQUIRED FOR INSTALLATION M3 included EN pm EA Table bracket TE T C 1 Array clamp inner F 1 Table top H 1 J 6 T K 4 10 24 x 1 2 ee vi T L 6 NS 10 x 5 8 G 6 NY Cable tie 5 1 2 N 2 Ma 10 Installation Instructions QMP1T ASSEMBLY The QMP1T is designed to be attached to the Chief QMP1FB fixed music stand or the QMB1MB mobile music cart 1 Attach column to cart stand base not included following instructions included with cart stand not included 2 Attach table bracket C to attachment plate E using one 10 24 x 1 2 Phillips undercut machine screw H two 10 24 x 3 8 button head cap screws J two 10 flat washers N and four 10 24 nylon lock nuts M See Figure 1 Figure 1 3 Fasten table brace D to bracket assembly using four 10 24 x 3 8 button head cap screws J
5. s the installer s responsibility to make sure all components are properly assembled and installed using the instructions provided WARNING Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment It is the installer s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment Reinforce the structure as required before installing the component WARNING Exceeding the weight capacity can result in serious personal injury or damage to equipment It is the installer s responsibility to make sure the combined weight of all components attached to the QMP1T does not exceed 50 Ibs 22 7 kg Use with products heavier than the maximum weight indicated may result in collapse of the mount and its accessories causing possible injury i I d 11 0 OUTER COLUM A CLAM POW DIMENSIONS INCHES Installation Instructions QMP1T LEGEND Tighten Fastener Apretar elemento de fijaci n Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Phillips Screwdriver Destornillador Phillips Kreuzschlitzschraubendreher Chave de fendas Phillips Cacciavite a stella Kruiskopschr
Download Pdf Manuals
Related Search