Ergotech Group Quad (2 over 2) LCD Desk Stand
Contents
1. ERGOTECH GROUP INC i 8 Westchester Plaza ERGOTECH Elmsford NY 10523 914 347 3800 Installation Instructions Product 100 D28 B22 Quad Desk Stand 1 Check to see that small hex set screw at rear of base is backed out enough to allow pole to seat down completely insert pole into base Tighten set screw using 3mm Allen key provided 2 Loosen ratchet type handle on pole clamp with horizontal bar ratchet handle must be on the right side of the pole Slide clamp and assembly over pole and tighten handle Repeat for second horizontal bar ainiti 3 Attach quick release pivots to back of each monitor with screws provided Be sure that silver release button is toward the top of the monitor 4 Place each monitor on the horizontal bar by tipping back approximately 45 degrees and then down until the silver release button engages the groove in the bar It will click into place Repeat for second horizontal bar To adjust monitors Laterally Place hand on bottom of monitor and lift slightly to support weight Monitor will slide along bar Left Right and Up Down Grasp monitor with both hands and adjust to desired position To tension the vertical adjustment to the weight of monitor Tighten the 5mm bolt on the right side of the pivot with the hex wrench provided To remove monitor from the extrusions Take the weight from the monitor with one hand on the bottom and tip www ergotechgroup2. com
Download Pdf Manuals
Related Search