Valcom VIP-130L-BGE loudspeaker
Contents
1. INTRODUCTION The VIP 130L IP Paging Horn is a self contained paging system which enables voice paging up to 1200 feet from an Ethernet connection The VIP 130L consist of a high efficiency 5 Watt Class D Horn and a VIP LLE Network Extender allowing stand alone capability when used with a SIP enabled telephone System or can be accessed from a variety of Valcom managed VoIP products SPECIFICATIONS Access Methods PBX FXO Port w VIP 81 1 POTS telephone set w VIP 811 PBX FXS Port w VIP 821 Valcom M Cast Page Group SIP enable telephone system Features e RJ 45 network connection LED Status Indicator Network activity LEDs 802 3af compliant High Efficiency Class D 5 Watt Amplifier Dimensions Weight Horn e 7 00 H x 10 00 W x 10 00 D 18 75 cm H x 25 4 cm W x 26 4 cm D e Weight 5 8 Ibs 2 63 kg Network Extender VIP LLE e 1 30 H x 6 10 W x 6 00 D 3 51 cm H x 15 72 cm W x 13 51 cm D e Weight 0 85 lbs 0 39 kg ISSUE 3 Nominal Specifications HORN Input Impedance 600 Ohms Input Level 10dBm Output Impedance 600 Ohms Output Level 10dBm nominal Nominal Specifications VIP LLE Via 802 3af PoE Ethernet Switch Class 3 12 95W Environment Temperature 0 to 40 C Humidity 0 to 85 non precipitating Packing List VIP LLE Network Extender e 1 5 Walt High Efficiency Horn EE r VSP Document Mounting Brackets a Wood Serews a RJ 45 Termination Block Par RJ 45 Patc2. COM LIMITED WARRANTY Valcom Inc warrants its products only to the original purchaser for its own use to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment This Limited Warranty obligation shall be limited to the replacement repair or refund of any such defective device within the warranty period provided that inspection by Valcom Inc indicates the validity of the claim the defect is not the result of damage misuse or negligence after the original shipment the product has not been altered in any way or repaired by others and that factory sealed units are unopened a service charge plus parts and labor will be applied to units defaced or physically damaged freight charges for the return of products to Valcom are prepaid all units out of warranty are subject to a service charge The service charge will cover minor repairs major repairs will be subject to additional charges for parts and labor This Limited Warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom Inc be liable for any anticipated profits consequential damages loss of time or other losses incurred by the buyer in connection with the purchase operation maintenance installation removal or use of the product The maximum liability of Valcom under this warranty is limited to the purchase price of the specific Product co
3. ace at the four corners of the bottom of the unit Wall Using the brackets and wood screws provided secure the VIP LLE Network Extender to the wall Mounting HORN The horn should be mounted 15 to 20 feet above the floor to allow for best sound distribution The unit can be mounted to a wall a beam or an electrical box NOTE For ease of installation the base can be attached to the speaker before or after the base is mounted e Loosen position adjustment knob e Insert the ball of the base into the socket of the speaker e Tighten the position adjustment knob e Mount the base to a wall using the two holes provided Knockout holes are provided for punch out should additional holes be desired e A C clamp is provided with the horn to allow mounting to a beam Place the bolt through the hole in the bottom of the base to secure the C clamp to the beam It is suggested that the horn be mounted to the underside of the I beam to provide maximum positioning adjustments e Connection to an electrical backbox is accomplished by channeling wire through the ball of the base and making appropriate connections The base has holes punched for a double gang square box but by punching out additional knockout holes the base can be mounted to a single gang or octagon box The horn may be rotated or moved up and down to obtain the desired position by loosening the position adjustment knob at the bottom of the unit
4. approximately one turn Make required adjustments and re tighten knob Interconnections The only method of powering the VIP 130L IP Paging Horn is via a power over Ethernet switch or power injector meeting the 802 3af specification Make all required signal connections before connecting to Ethernet switch or power injector meeting the 802 3af specification Power is supplied to the horn assembly via the VIP LLE Network Extender 947628 Signal Connections Fig 1 Connect CAT 5 cable from the rear panel color coded connecior of the VIP LLE Network Extender to the supplied RJ 45 termination block 900 feet maximum distance Use the supplied CAT 5 patch cable to connect the RJ 45 connector of horn to RJ 45 termination block Network Connection Fig 1 The VIP LLE Network Extender has one CAT 5 RJ 45 NETWORK connector on the front panel and one CAT 5 color coded connector on the rear panel Use the supplied CAT 5 patch cable to connect the NETWORK connector of the VIP LLE Network Extender to a 802 3af compliant PoE port 300feet maximum distance Front View VALCOM Status EEE w Link za m Act Rear View WBL WO WGN WBR E E D D D W O PAIR NOT USED 900 MAX DISTANCE Status Indicator Lights The VIP LLE Network Extender has 3 status indication lig
5. h Cable 4 1 1 947628 INSTALLATION FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at his own expense Precautionary Designations CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electric shock Do not remove cover No user serviceable parts inside Refer servicing to qualified service personnel This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit Mounting VIP LLE The VIP LLE Network Extender is designed for wall or shelf mounting and must be within 300 feet of the network switch Shelf Provided with the VIP LLE Network Extender are four rubber pads Peel the pads from the carrier backing and pl
6. hts STATUS Flashes during normal operation and solid when unit in reset LINK Indicates 100 Mbit Ethernet connection when illuminated No activity indicates 10 Mbit connection Act Indicator flashes to indicate network activity Operation Provide paging from SIP connection or via a variety of Valcom managed VolP products Integration to customer telephone system can be via SIP registration FXO port with VIP 811 or FXS port with VIP 821 W BR PAIR RJ 45 Termination Block GOOG K Na as a KA v Q RI WY SY WBL Amplified W GN PAIR Paging Horn CAT 3 5 6 Figure 1 947628 TECHNICAL ASSISTANCE Valcom equipment is not field repairable Assistance in troubleshooting is available from Valcom Inc maintains service facilities in the factory Call 540 563 2000 and press 1 for Roanoke VA Should repairs be necessary Technical Support or via email at attach a tag to the unit clearly stating your support valcom com company name address phone number contact person and the nature of the problem When requesting assistance you should include Send the unit to all available information It is strongly suggested that you go to the web site and follow the trouble resolution procedure at http voip valcom com Valcom Inc Repair amp Return Dept 5614 Hollins Road Roanoke VA 24019 VAL
7. vered by the warranty Disclaimer Except for the Limited Warranty provided herein the product is provided as is without any warranty of any kind whatsoever including without limitation any WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT This warranty specifically excludes damage incurred in shipment In the event a product is received in damaged condition the carrier should be notified immediately Claims for such damage should be filed with the carrier involved in accordance with the F O B point Headquarters Valcom Inc 5614 Hollins Road Roanoke VA 24019 5056 Phone 540 563 2000 FAX 540 362 9800 4 947628
Download Pdf Manuals
Related Search