Home

Olympus TG-320

1. p 53 Names of Parts Camera unit 1 Battery card connector cover lock 2 Strap eyelet 3 HDMI micro connector 1 4 Battery lock knob 13 5 Multi connector M eie p 14 16 51 54 6 Battery card connector cover PERESAN p 13 14 16 51 69 7 Microphone 8 Self timer lamp p 35 9 Flash 10 Lens 11 Tripod socket EN Indicator lamp p 13 16 ON OFF button p 17 19 Monitor p 11 19 50 59 Speaker MENU button Shutter button p 20 59 Zoom buttons p 21 24 Movie record button p 20 x button switching between shooting and playback KALA AA p 20 22 48 10 button OK p 4 11 Arrow pad INFO button changing information display weep 4 6 o 0 400 amp Colo L p 22 25 U button erase p 24 12 button camera guide menu guide PEAH beoe p 26 Attaching the camera strap Pull the strap tight so that it does not come loose 10 EN Monitor Shooting mode display 1 Battery check 2 Shooting mode 3 Flash standby flash charge ue 59 4 Macro super macro p 34 5 Self timer 35 6 Exposure compensation p 35 7 White balance p 36 8 I
2. EB A Battery card connector cover Multi connector USB cable supplied Indicator lamp On Charging Off Charged o The battery is not fully charged at shipment Before use be sure to charge the battery until the indicator lamp turns off up to 3 hours o If the indicator lamp does not light the USB AC adapter is not connected to the camera correctly or the battery camera or USB AC adapter may be broken For details on the battery and the USB AC adapter see Battery and USB AC adapter p 64 o The battery can be charged while the camera is connected to the computer Charging time varies depending on the performance of a computer There may be cases in which it takes approx 10 hours When to charge the batteries Charge the battery when the error message shown below appears Flashes in red Battery Empty Monitor top left Error message Date time time zone and language The date and time set here are saved to image file names date prints and other data You can also choose the language for the menus and messages displayed in the monitor 1 Press the ON OFF button to turn on the camera e The date and time setting screen is displayed when the date and time are not set Cancel iJ Date and time setting screen 2 Use A V to select the year for Y Cancel III 4 As in Steps 2 and 3 use A V lt D and the button to set M month D day Ti
3. Even if a computer has USB ports proper operation is not guaranteed in the following cases Computers with USB ports installed using an expansion card etc Computers without a factory installed OS and home built computers 48 EN n u g the menus see Setup menu p 6 Turning on the camera with the gt button gt Power On 1T Settings 1 gt gt Power On Submenu 2 Application The camera is not turned on To turn No on the camera press the ON OFF button Yes Press and hold the gt button to turn the camera on in the playback mode Saving the mode when the camera is turned off Keep Settings 1T Settings 1 gt KeeplISettings Submenu 2 Application N The shooting mode is set to P mode o when the camera is turned on The shooting mode is saved when Yes the camera is turned off and is reactivated the next time the camera is turned on Choosing the opening screen display Pw On Setup 1T Settings 1 gt Pw On Setup Submenu 2 Off Application No opening screen is displayed On The opening screen is displayed when the camera is turned on For information on using the menus see Setup menu p 6 Selecting the camera sound and its volume Sound Settings Yh Settings 2 amp Sound Settings Submenu 2 Submenu 3 Application Sound Type 4 2 3 Selects the camera sounds operation sounds shutter sound an
4. W T 14M n Optical zoom range W T SU L T Image zoomed and cropped Other Image size Zoom bar w l 14M Ea Digital zoom range WT Other Image zoomed and J cropped Digital zoom range If Image Size is less than the full resolution after reaching the maximum optical zoom the camera will automatically resize and crop the image to the selected Image Size then enter the digital zoom range if Digital Zoom is On Photographs taken with the zoom bar displayed in red may appear grainy Changing the shooting information display The display of the screen information can be changed to best match the situation for example the need for a clear view of the screen or for making a precise composition by using the grid display EN 21 1 Press A INFO Viewing images e The displayed shooting information changes in the order shown below each time the button is 1 Press the gt button pressed Shooting mode display p 11 Number of frames Normal Total number of images 4 7 Sim qi F200 BR No information E 4 Detailed 2n pis back image ED y g 7 a 2 Use lt D to select an image S E00 5 z 5 Displays Displays next previous image image Reading a histogram If the peak fills too much of the frame the o Hold D to fast forward and hold lt to reverse i ill tly white ARE ME aa Wang
5. 26 EN o To start a slideshow press the MENU button To stop the slideshow press the MENU or button o 3D images are composed of JPEG files and MP files If any files are deleted on a computer playback of 3D images may not be possible Using the menu guide Pressing the button in the setup menu displays a description of the current item o Using the Menu p 5 Using the camera guide Use the camera guide to look up camera operations 1 Press the button in the standby mode screen or the playback screen Search for solution Search by purpose Search by Learn about the gt uation camera Search by keyword History Submenu 2 Application Search by Functions or operating methods can purpose be searched Search for a A solution can be searched when solution having problems during operation Search by Search from shooting playback situation scene Information is shown about beam about he recommended functions and basic Sama operating methods for the camera Sein by Search from the camera keyword eyword A Searches can be performed from the History search history 2 Use A V lt to select the desired item and press the button Search by Search for a purpose soli Search by Learn about the D D situation cameral Search by History keyword Exit e Follow the on screen instructions to search the desired contents EN 27 Us
6. Press the button again to cancel the settings 3 If necessary repeat Steps 1 and 2 to protect other images and press the MENU button Rotating images j Playback menu gt 1 Use lt I gt to select an image 2 Press the button to rotate the image 3 If necessary repeat Steps 1 and to make settings for other images and press the MENU button o The new picture orientations will be saved even after the power is turned off For information on using the menus see Setup menu p 6 Menus for Other Camera Settings The default settings of the function are highlighted in Erasing data completely Memory Format Format 1T Settings 1 gt Memory Format Format o Before formatting check that no important data is left in the internal memory or card Cards must be formatted with this camera before first use or after being used with other cameras or computers Submenu 2 Application Completely erases the image data Yes in the internal memory or card including protected images No Cancels formatting Be sure to remove the card before formatting the internal memory Copying images in the internal memory to the card Backup 1T Settings 1 gt Backup Submenu 2 Application Ye Backs up image data in the internal es memory to the card No Cancels the backup It takes some time to back up data Check that the battery has suffic
7. During a slideshow press gt to advance one frame lt to go back one frame Searching for images and playing back the related images Photo Surfing x Playback menu gt Photo Surfing In Photo Surfing images can be searched and related images can be played back by selecting the related items To start Photo Surfing Press the button to start Photo Surfing When a related item of the image displayed is selected with A V images related to the item are displayed in the lower part of the monitor Use IP to display an image To select related items that are not displayed press the button when selecting an item To stop Photo Surfing use A V to select ALL and press the 9 button Related items Images corresponding the related items EN 43 Using the ib PC software and importing data back to the camera o Refer to the ib PC software help guide for details on how to use the ib PC software o The ib PC software may not work properly on the pictures edited by other application software The following Photo Surfing functions can be performed when data created with the ib PC software is imported back to the camera Photo Surfing Information of persons or shooting locations and new Collections can be added in the related items Changing the image size Fa x Playback menu gt Edit gt P Submenu 3 Application WGA 640 x 480 This saves a high resolution image as a s
8. The ISO sensitivity is fixed to the Value selected value o In the ISO setting although smaller values result in less sensitivity sharp images can be taken under fully lit conditions Larger values result in higher sensitivity and images can be taken at fast shutter speeds even under low light conditions However high sensitivity introduces noise into the resulting picture which may give it a grainy appearance Sequential shooting Drive Pictures are taken sequentially while the shutter button is held down 1 Select the drive option in the shooting function menu Description One frame is shot each time the shutter button is pressed Take sequential shots using the focus brightness exposure and White balance set in the first frame mn The camera takes sequential shots at a faster speed than in D The shooting spe ed varies depending on the settings for Image Size Compression p 39 o When set to F the flash p 34 cannot be set to Redeye In addition when set to fy the flash is fixed to Flash off o When set to fd Image Size is limited to EM or lower and the SO sensitivity is fixed to ISO Auto EN 37 For information on using the menus see Setup menu p 6 Menus for Shooting Functions The default settings of the function are highlighted in Restoring the shooting functions to the default settings Reset ICI Shooting m
9. The display size of the images can be changed If the peak fills too much Index view and close up view p 24 of the frame the image will appear mostly black The green section shows luminance distribution within the screen s center 22 EN To play sound recordings To play sound recorded with an image select the image and press the button A icon appears on images with which sound has been recorded Pausing and restarting playback Press the button to pause playback During pause fast forward or reverse press the button to restart playback Fast forward Press D to fast forward Press gt again to increase the fast forward speed Rewind Press lt to rewind The speed at which the recording rewinds increases each time lt is pressed Adjusting the volume Use A V to adjust the volume During audio playback To adjust the volume use A V To play back movies Select a movie and press the button Operations while playback is paused During pause Movie Play Gg 11 02 26 00 00 R Cuein Movie 9 Use A to display the first frame and press V to display the last frame Operations during movie playback Advancing and rewinding one frame at a time Resuming playback oazo D KI Elapsed time Total recording time During playback Press D or lt to advance or rewind one frame at a time Hold D or lt pressed
10. WHERE TO SEND PRODUCT FOR SERVICE See WORLDWIDE WARRANTY for the nearest service center INTERNATIONAL WARRANTY SERVICE International warranty service is available under this warranty For customers in Europe CE mark indicates that this product complies with the European requirements for safety health environment and customer protection CE mark cameras are intended for sales in Europe This symbol crossed out wheeled bin WEEE Annex IV indicates separate collection of waste electrical and electronic equipment in the EU countries Please do not throw the equipment into the domestic refuse mmm Please use the return and collection systems available in your country for the disposal of this product This symbol crossed out wheeled bin Directive 2006 66 EC Annex II indicates separate collection of waste batteries in the EU countries Please do not throw the batteries into the domestic refuse Please use the return and collection systems available in your country for the disposal of the waste batteries EN 75 Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during the applicable national warranty period and has been purchased from an authorized Olympus distributor within the business area of Olympus Europa Holding GmbH as stipulated on the website http www olym
11. Best results in most environments can normally be obtained with the WB Auto setting but for some subjects you should try experimenting with different settings This is especially true for sunshade under a clear sky mixed natural and artificial light settings and so on Image quality Taking sharper pictures Taking pictures with the optical zoom Avoid using digital zoom p 41 to take pictures Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity noise small colored spots and color unevenness that were not in the original image can occur and the image can appear grainy Selecting the ISO sensitivity p 36 Panorama Taking pictures so that the frames are stitched smoothly e A tip for panoramic shooting Taking pictures by pivoting with the camera at the center prevents shifting of the image When taking pictures of close objects in particular pivoting with the lens end at the center produces favorable results Panorama p 30 Batteries R Making batteries last longer e Avoid any of the following operations when not actually taking pictures because they deplete the battery power e Repeatedly pressing the shutter button halfway Repeatedly using the zoom Set Power Save p 52 to On Playback Editing tips Playback Playing images in the internal memory and card e Remove the card and display the images in internal memory
12. Press the shutter button to shoot the first frame Overlap the subject with the image that is faintly displayed in the monitor e The picture is taken automatically Taking pictures with Manual Press the shutter button to shoot the first frame 2 Overlap the subject with the image that is faintly displayed in the monitor and choose the position for the second frame 3 Press the shutter button to take the second shot To exit 3D shooting mode without saving an image press the MENU button EN 33 Using Shooting Functions Using the Menu p 5 Using the flash The flash functions can be selected to best match the shooting conditions 1 Select the flash option in the shooting function menu 2 Use ID to select the setting option and Shooting closeups Macro shooting This function enables the camera to focus and shoot subjects at close distances 1 Select the macro option in the shooting function menu 2 Use lt D to select the setting option and press the button to set press the 9 button to set Option Description Off Macro mode is deactivated Option Description gt This enables shooting as close as Flash Auto The flash fires automatically in low Macro 10 cm 3 9 in 30 cm 11 8 in to light or backlight conditions the subject Pre flashes are emitted to reduce This enables shooting as close as Redeye the occurrence of red eye in your Super M
13. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product If the product is used without observing the information given under this symbol serious injury or death may result If the product is used without observing the information given under this symbol injury or death may result If the product is used without observing the information given under this symbol minor personal injury damage to the equipment or loss of valuable data may result WARNING TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK NEVER DISASSEMBLE EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT General Precautions Read All Instructions Before you use the product read all operating instructions Save all manuals and documentation for future reference Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by Olympus Water and Moisture For precautions
14. o If the indicator lamp does not light the camera is not correctly connected or the battery camera computer or USB cable may not be functioning as expected EN 13 o We recommend that you use a computer equipped with Windows XP Service Pack 2 or later Windows Vista or Windows 7 See Charging the battery with the included USB AC adapter p 16 if you are using a different computer or wish to charge the battery without using a computer Windows 1 Insert the supplied CD in a CD ROM drive Windows XP e A Setup dialog will be displayed Windows Vista Windows 7 e An Autorun dialog will be displayed Click OLYMPUS Setup to display the Setup dialog If the Setup dialog is not displayed select My Computer Windows XP or Computer Windows Vista Windows 7 from the start menu Double click the CD ROM OLYMPUS Setup icon to open the OLYMPUS Setup window and then double click Launcher exe If a User Account Control dialog is displayed click Yes or Continue 14 EN 2 Follow the on screen instructions on your computer If nothing is displayed on the camera screen even after connecting the camera to the computer the battery may be exhausted Leave the camera connected to the computer until the battery has charged then disconnect and reconnect the camera Connecting the camera Indicator lamp A A Battery
15. BRANCHES PENANG OFFICE KUCHING OFFICE Suite 3A 6 Level 3A Wisma Great Eastern Level 6 5A 6th Floor Menara MAA No 25 Lebuh Light 10200 Penang Lot 86 Section 53 Tel 604 262 2832 Fax 604 262 5832 Jalan Central Timur 93300 Kuching Sarawak Tel 6082 253 885 Fax 6082 256 885 http www olympus com my OLYMPUS http www olympus com OLYMPUS IMAGING CORP Shinjuku Monolith 3 1 Nishi Shinjuku 2 chome Shinjuku ku Tokyo Japan OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Tel 484 896 5000 Technical Support USA Our phone customer support is available from 9 am to 9 pm 24 7 online automated help Monday to Friday ET http www olympusamerica com support http olympusamerica com contactus Phone customer support Tel 1 888 553 4448 Toll free Olympus software updates can be obtained at http www olympusamerica com digital OLYMPUS EUROPA HOLDING GMBH Premises Wendenstrasse 14 18 20097 Hamburg Germany Goods delivery Bredowstrasse 20 22113 Hamburg Germany Tel 449 40 23 77 3 0 Fax 449 40 23 07 61 Letters Postfach 10 49 08 20034 Hamburg Germany European Technical Customer Support Please visit our homepage http www olympus europa com or call our TOLL FREE NUMBER 00800 67 10 83 00 for Austria Belgium Denmark Finland France Germany Italy Luxemburg Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Please note so
16. 3 Use lt I gt to select the desired mode and then Fish Eye press the amp button to set Magic Filter Q Drawing Soft Focus Submenu 1 Application i Three frames are taken and parse combined by the camera The user Watercolor only composes the shots so that the Auto i Two images are saved an unmodified image and an en and an kdo image to which the effect has been applied alae e RS citar iud In MAGIC mode the optimum shooting settings are Three frames ar eign and pre programmed for each scene effect For this combined by the camera The user reason some settings cannot be changed in some Manual composes he shots using the guide modes frame and manually releases the shutter The frames that were taken are PC combined into a panorama image using the PC software o For details on installing the PC software see Charging the battery and setting up using the supplied CD p 13 30 EN When set to Auto or Manual Image Size To exit the panorama function without saving an p 39 is fixed to EM image press the MENU button The focus exposure zoom position p 21 and white If the shutter does not automatically release try balance p 36 are locked at the first frame Manual or PC The flash p 34 is fixed Flash Oi de The fash p 34 is fxed to Flash Of mode Taking pictures with Manual Taking pictures with Auto Use A V lt I gt to specify at
17. ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM The software in this camera may include third party software Any third party software is subject to the terms and conditions imposed by the owners or licensors of that software under which software is provided to you Those terms and other third party software notices if any may be found in the software notice PDF file stored within the accompanying CD ROM or at http www olympus co jp en support imsg digicamera download notice notice cfm Powered by ARCSOFT SPECIFICATIONS Camera Product type Digital camera for shooting and displaying Recording system Still pictures Digital recording JPEG in accordance with Design rule for Camera File system DCF Applicable standards Exif 2 2 Digital Print Order Format DPOF PRINT Image Matching III PictBridge 3D still image MPformat Sound with still Wave format pictures Movie MPEG 4AVC H 264 Memory Internal memory SD SDHC SDXC memory card Eye Fi card No of effective pixels 14 000 000 pixels Image pickup device 1 2 3 CCD primary color filter Lens Olympus lens 5
18. Select Print All Print Multi Print All Index Print Order Exit E9 To cancel printing Press the MENU button while Do Not Remove USB Cable is displayed Select Cancel using A V and then press the button 11 Press the MENU button 12When the message Remove USB Cable is displayed disconnect the USB cable from the camera and printer Print Reservations DPOF In print reservations the number of prints and date imprint option are saved in the image on the card This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera DPOF is a standard for storing automatic printout information from digital cameras Print reservations can be set only for the images stored on the card DPOF reservations set by another DPOF device cannot be changed by this camera Make changes using the original device Making new DPOF reservations with this camera will erase the reservations made by the other device DPOF print reservations can be made for up to 999 images per card Single frame print reservations L Display the setup menu Setup menu p 6 From the playback menu gt select Print Order and then press the button WW NiG Use A V to select L1 and press the button Nu 113400 0004 21 02 26 00 00 Seth 4 Use lt I gt to select the image for print reservation Use A V to sel
19. ana Detailed Ir 3D amp x10 BD TT F3 5 20 Reading a histogram p 22 Playing back panorama images Panorama images that were combined together using Auto or Manual can be scrolled for viewing Creating panoramic images F lt mode p 30 1 Select a panorama image during playback Viewing images p 22 Replay Hi 11 02 26 00 00 Current viewing area To control panorama image playback Zoom in Zoom out Press the button to pause playback Then press the zoom button to enlarge shrink the image EN 25 Playback direction Press the button to pause playback Then press A V IP to scroll the image in the direction of the pressed button Pause Press the button Restart scrolling Press the button Stop playback Press the MENU button Playing back 3D images 3D images shot with this camera can be played back on 3D compatible devices connected to this camera using an HDMI cable sold separately o Shooting 3D images 3D mode p 32 o When playing back 3D images read the warnings in the instruction manual for the 3D compatible devices carefully 1 Connect the 3D compatible device and camera using the HDMI cable For the connection and setting method see Connection via HDMI cable p 51 2 Use A V to select 3D Show and then press the amp button 3 Use lt P to select the 3D image to play back and then press the button ere MENU
20. be formatted with this camera before first use or after being used with other cameras or computers Memory Format Format p 47 When using the Eye Fi card read the instruction manual of the Eye Fi card carefully and comply with the instructions Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback Current memory indicator Internal memory is being used P Card is being used Current memory indicator Shooting mode 41102123 Playback mode Even if Memory Format Format Erase Sel Image or All Erase is performed the data in the card is not completely erased When disposing of the card damage the card to prevent the disclosure of personal data 66 EN Readout recording process of the card During shooting the current memory indicator lights up red while the camera is writing data Never open the battery card connector cover or unplug the USB cable This can not only damage the image data but also render the internal memory or card unusable Lights up red Number of storable pictures still images Continuous recording length movies in the internal memory and SD SDHC SDXC memory cards The figures in the following tables are quoted only as a rough guideline The actual number of storable pictures or continuous recording lengths will differ according to the shooting conditions and memory cards
21. effective When shooting while the IS Movie Mode movies is set to On the image will be enlarged somewhat before saving Viewing the image immediately after shooting Rec View Shooting menu 2 gt Rec View Submenu 2 Application The image being recorded is not displayed This allows the user off to prepare for the next shot while following the subject in the monitor after shooting The image being recorded is displayed This allows the user to make a brief check of the image that was just taken EN 41 Displaying icon guides Icon Guide Qh Shooting menu 2 f Icon Guide Submenu 2 Application Off No icon guide is displayed The explanation of the selected icon will be displayed when a shooting mode or function menu icon is selected position the cursor on the icon for a while to display the explanation On Pria KN Functions can be changed xr Icon guide manually 3 20 0 4 ao 150 auto mu du Imprinting the date of recording Date Stamp IC Shooting menu 2 Date Stamp Submenu 2 Application Off Do not imprint the date Stamp new photographs with the On date of recording o If the date and time are not set the Date Stamp setting cannot be set Date time time zone and language p 17 The date stamp can not be deleted 42 EN g the menus see Setup menu p 6 Date Stamp is
22. for continuous advance or rewind Press the button to resume playback To stop movie playback Press the MENU button EN 23 Erasing images during playback Press the zoom buttons Single image erase Iw amp a TJ 1 Display the image you want to erase and press V 1 Single image view Close up view 41 02 26 00 00 Cancel EN wy tT 2 Press A V to select Erase and press the Index view button o For erasing multiple images at the same time see Erasing images Erase p 45 Index view and close up view Index view enables quick selection of a desired image Close up view up to 10x magnification allows checking of image details Photo Surfing o When the movie is selected in the index view the photo surfing cannot be displayed even by pressing the W zoom button Photo Surfing p 43 24 EN To select an image in index view Use A V lt D to select an image and press the button to display the selected image in single image view To scroll an image in close up view Use A V ID to move the viewing area To stop photo surfing Use A V to select ALL and press the button Changing the image information display Shooting information settings displayed on the screen can be changed 1 Press A INFO e The displayed image information changes in the order shown below each time the button is pressed Normal K No information aa
23. on the country or area you are in the AC wall outlet may be shaped differently and the charger and USB AC adapter may require a plug adapter to match the wall outlet For details ask at your local electrical shop or travel agent Do not use travel voltage converters as they could damage your charger and USB AC adapter Eye Fi card commercially available The Eye Fi card may become hot during use When using an Eye Fi card the battery may run out faster When using an Eye Fi card the camera may function more slowly Using an SD SDHC SDXC memory card or Eye Fi card commercially available A card and internal memory also corresponds to the film that records images in a film camera Otherwise the recorded images data can be erased and retouching is also available with the use of a computer Cards can be removed from the camera and exchanged but this is not possible with the internal memory Use of larger capacity cards enables you to take more pictures SD SDHC SDXC memory card write protect switch The SD SDHC SDXC memory card body has a write protect switch If you set the switch to the LOCK side you will not be able to write to the card delete data or format Return the switch to enable writing gt Cards compatible with this camera SD SDHC SDXC memory cards and Eye Fi cards for compatibility card details visit the Olympus website Da DD EN 65 Using a new card Cards must
24. performed This is because the camera automatically performs actions of auto focus as far as it is ready to shoot EN 59 Error message When one of the messages below is displayed on the monitor check the corrective action Error message Corrective action Error message Corrective action 1 The Image Cannot Be Edited Problem with selected image Use photo retouch software etc to edit the image on a computer B Card Error Card problem Insert a new card D Battery Empty Battery problem Charge the battery B Write Protect Card problem The card write protect switch is set to the LOCK side Release the switch a No Connection Connection problem Connect the camera and computer or printer correctly o Internal memory problem Insert a card Memory Full Erase unwanted images B Card problem Replace the card Card Full Erase unwanted images Card Setup Format Card problem Use A V to select Format and press the button Next use A V to select Yes and press the button Memory Setup Four Memory Format Internal memory problem Use A V to select Memory Format and press the button Next use A V to select Yes and press the button En Printer problem Load paper into the printer No Paper Printer problem Refill the ink in the printer No Ink e Printer prob
25. refurbished and or serviceable used parts that meet Olympus s quality assurance standards for warranty or any other repairs and ii make any internal or external design and or feature changes on or to its products without any liability to incorporate such changes on or to the Products WHAT IS NOT COVERED BY THIS LIMITED WARRANTY Excluded from this limited warranty and not warranted by Olympus in any fashion either express implied or by statute are a products and accessories not manufactured by Olympus and or not bearing the OLYMPUS brand label the warranty coverage for products and accessories of other manufacturers which may be distributed by Olympus is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties any Product which has been disassembled repaired tampered with altered changed or modified by persons other than Olympus s own authorized service personnel unless repair by others is made with the written consent of Olympus b 74 EN c defects or damage to the Products resulting from wear tear misuse abuse negligence sand liquids impact improper storage nonperformance of scheduled operator and maintenance items battery leakage use of non OLYMPUS brand accessories consumables or supplies or use of the Products in combination with non compatible devices d software programs e supp
26. still images HARE p 39 67 Image quality movies MW p 39 68 p 39 67 68 17 Image size 18 File number 19 Date and time p 17 53 20 Shadow Adjustment Technology 21 Shooting mode Preparing the Camera Inserting the battery 1 Battery card connector cover lock FEE Battery card connector cover Battery lock knob eo Insert the battery by putting in the Y marked side first with the marks toward the battery lock knob Damage to the battery exterior scratches etc may produce heat or an explosion insert the battery while sliding the battery lock knob in the direction of the arrow When removing the battery or card be sure to turn off the camera before opening or closing the battery card connector cover When using the camera be sure to close and lock the battery card connector cover Slide the battery lock knob in the direction of the arrow to unlock and then remove the battery Charging the battery and setting up using the supplied CD Connect the camera to the computer to charge the battery and use the supplied CD for setup o User registration using the supplied CD and installation of ib computer software is available on Windows computers only The camera battery can be charged while the camera is connected to a computer e The indicator lamp lights during charging and turns off when charging is complete o Charging takes up to 3 hours
27. the frame and focuses automatically Face iESP The camera focuses on the subject Spot located within the AF target mark The camera tracks the subject movement automatically to focus on it continuously AF Tracking For some subjects the frame may not appear or may take some time to appear f the frame blinks in red the camera cannot focus Try refocusing on the subject 40 EN n u ig the menus see Setup menu p 6 To focus on a moving subject continuously AF Tracking Hold the camera to align the AF target mark on the subject and press the button 2 When the camera recognizes the subject the AF target mark automatically tracks the subject movement to focus on it continuously 8 To cancel the tracking press the button Depending on the subjects or the shooting conditions the camera may be unable to lock the focus or fail to track the subject movement o When the camera fails to track the subject movement the AF target mark changes to red Selecting the method for measuring the brightness ESP Ii Shooting menu 1 gt ESP Submenu 2 Application Shoots to obtain a balanced brightness over the entire screen ESP Meters the brightness at the center and surrounding areas of the screen separately Shoots the subject at the center during backlighting Meters the brightness at the center of the Screen spot Whe
28. used The figures in the table below are the number of the storable pictures when using the internal memory formatted Memory Format Format p 47 Still pictures Number of storable still pictures Image Size Compression SD SDHC SDXC memory card Internal memory 4GB Fine 2 574 mm 4288x3216 Sa 5 1 134 Fite 5 982 Em 3264x2448 ifs 5 1921 FR 8 1 574 E 2560x1920 wf 16 m Fite 12 2 411 EM 2048x1536 uf B 002 Fite 20 4 113 1600x1200 uf di 3 085 Fite 32 6 366 Km 1280x960 Na 63 12 406 Fite 120 23 600 coe m3 219 42 999 Fite 3 764 4288x2416 ufa 7 1 507 FR 19 3 813 1920 1080 38 7 505 EN 67 Movies Continuous recording length Image Size Image Quality Internal memory Ww a card With sound Without sound With sound Without sound Fite 12 sec 12 sec 29 min 29 min 1280x720 NS 18 sec 18 sec 29 min 29 min Fite 18 sec 18 sec 87 min 42 sec 88 min 46 sec eee N u 37 sec 38 sec 173 min 19 sec 177 min 34 sec fis 320x240 Fe 38 sec 39 sec 179 min 46 sec 184 min 21 sec o The maximum file size of a single movie is 4 GB regardless of the capacity of the card The maximum recording length of a single movie is 29 minutes for KEN Increasing the number of pictures that can be taken Either erase unwanted images or connect the camera to a computer or other device to save the images and
29. water and seek medical attention immediately Always store batteries out of the reach of small children If a child accidentally swallows a battery seek medical attention immediately AN WARNING Keep batteries dry at all times To prevent batteries from leaking overheating or causing a fire or explosion use only batteries recommended for use with this product Insert the battery carefully as described in the operating instructions If rechargeable batteries have not been recharged within the specified time stop charging them and do not use them Do not use a battery if it is cracked or broken If a battery leaks becomes discolored or deformed or becomes abnormal in any other way during operation stop using the camera If a battery leaks fluid onto your clothing or skin remove the clothing and flush the affected area with clean running cold water immediately If the fluid burns your skin seek medical attention immediately Never subject batteries to strong shocks or continuous vibration A CAUTION Before loading always inspect the battery carefully for leaks discoloration warping or any other abnormality The battery may become hot during prolonged use To avoid minor burns do not remove it immediately after using the camera Always unload the battery from the camera before storing the camera for a long period Caution for Usage Environment To protect the high precision technology con
30. which edge the next Press the shutter button to take the first frame Picture is to be connected 2 Move the camera slightly in the direction of the second frame Direction for combining the next frame Target mark Pointer 2 Press the shutter button to take the first frame PONES Joint areas Screen when combining images from left to right 8 Move the camera slowly while keeping it straight and stop the camera where the pointer and target mark overlap e The camera releases the shutter automatically 1st frame 8 Compose the next shot so that joint area 1 overlaps joint area 2 To combine only two pictures press the button before taking a third frame Repeat Step to take a third frame e After the third frame is taken the camera automatically processes the frames and the combined panorama image is displayed Composition of the 2nd frame EN 31 Press the shutter button to take the next shot To combine only two pictures press the button before taking the third frame Repeat steps and to take a third frame e After the third frame is taken the camera automatically processes the frames and the combined panorama image is displayed To exit the panorama function without saving an image press the MENU button Taking pictures with PC D Use A V lt to select the direction that the frames are combined Press the shutter button to take the fir
31. 0 to 18 2 mm f3 5 to 5 1 equivalent to 28 to 102 mm on a 35 mm camera Photometric system Digital ESP metering spot metering system Shutter speed 4to 1 2000 sec Shooting range 0 5 m 1 6 ft to oo normal 0 1 m 0 3 ft to oo W 0 3 m 1 0 ft to oo T macro mode 0 02 m 0 07 ft to 0 5 m 1 6 ft W only super macro mode Monitor 2 7 TFT color LCD display 230 000 dots Connector DC N jack USB connector A V OUT jack Multi connector HDMI micro connector type D Automatic calendar system 2000 up to 2099 Water resistance Type Equivalent to IEC Standard publication 529 IPX8 under OLYMPUS test conditions available in 3 m 9 8 feet deep water Meaning Camera can normally be used under water at a specified water pressure Dust resistance IEC Standard publication 529 IP6X under OLYMPUS test conditions Operating environment Temperature 10 C to 40 C 14 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Humidity 30 to 90 operation 10 to 90 storage Power supply One Olympus lithium ion battery LI 42B Dimensions 96 3 mm W x 63 4 mm H x 22 7 mm D 8 8 x 2 5 x 0 9 in excluding protrusions Weight 155g 5 5 oz including battery and card EN 79 Lithium ion battery ia Product type Lithium ion rechargeable battery Standard voltage DC3 7V Standard c
32. 1 and 2 for Easy Print p 54 2 Press the button 3 Use A V to select the print mode and press the amp button Submenu 2 Application Print This prints the image selected in Step 6 All Print This prints all images stored in the internal memory or card Multi Print This prints one image in a multiple layout format All Index This prints an index of all images stored in the internal memory or card Print Order This prints images based on the print reservation data on the card Print Order is available only when print reservations have been made Print Reservations DPOF p 57 4 Use A V to select Size Submenu 3 and press D If the Printpaper screen is not displayed the Size Borderless and Pics Sheet are set to the printer s standard Printpaper Size Borderless Stan gt Standard Ezio 5 Use A V to select the Borderless or Pics Sheet settings and press the button Submenu 4 Application The image is printed with a border OfflOn around it Off The image is printed to fill the entire paper On The number of images per sheet varies depending on the printer The number of images per sheet Pics Sheet is selectable only when Multi Print is selected in Step 3 The available settings for Borderless vary depending on the printer If Standard is selected in Steps 4 and 5 the image is printed at t
33. Inserting the battery p 13 Inserting an SD SDHC SDXC memory card or Eye Fi card commercially available p 18 Viewing images with high picture quality on a high definition TV Connect the camera to the TV using an HDMI cable sold separately e Playing back images on a TV p 50 Editing Erasing the sound recorded to a still image Record over the sound with silence when playing back the image Adding sound to still images amp p 44 EN 63 Appendix Camera care Exterior Wipe gently with a soft cloth If the camera is very dirty soak the cloth in mild soapy water and wring well Wipe the camera with the damp cloth and then dry it with a dry cloth If you have used the camera at the beach use a cloth soaked in clean water and wrung well If any dirt dust sand or other foreign materials adhere to the camera after use wash the camera using the method described on p 69 Monitor Wipe gently with a soft cloth Lens Blow dust off the lens with a commercial blower then wipe gently with a lens cleaner Do not use strong solvents such as benzene or alcohol or chemically treated cloth o Mold may form on the lens surface if the lens is left dirty Battery USB AC adapter Wipe gently with a soft dry cloth Storage When storing the camera for extended periods remove the battery USB AC adapter and card and keep in a cool dry place that is well ventilated Periodical
34. Menu Index Menus for Shooting Functions Shooting mode P Program Auto iAUTO iAUTO SCN Scene Mode MAGIC Magic Filter F4 Panorama 3D 3D Photo Flash 8 Macro 4 Self timer 8 Exposure compensation p 35 Image Stabilizer Rec View amp Icon Guide White balance ISO 8 Drive 8 ji Shooting menu 1 p 36 Image Size Compression ESP e Digital Zoom G Image Size JO Image Quality IS Movie Mode ele m m e Exit HI 40 gy Shooting menu 2 Image Stabilizer Rec View Icon Guide Date Stamp Y Movie menu Image Size Image Quality k IS Movie Mode p 41 W Movie sound recording TOUR M SMS p 42 EN 7 Menus for Playback Editing and Printing Functions e Playback Slideshow Photo Surfing Edit Erase Print Order Protect 3 Rotate Menus for Other Camera Settings off Storage Yes Yes off Set M Yh Settings 1 Memory Format Fontal aasa p 47 Backup Eye Fi USB Connection p 48 x Power On p 48 Keep Settings p 48 Pw On Setup p 48 2 Yh Settings 2 Sound Settings p 49 File Name Pixel Mapping IQ Monitor p 49 p 50 p 50 p 50 Power Save p 52 0 Language p 52 3 YB Settings 3 Date time p 53 World Time p 53 Data Repair
35. OLYMPUS DIGITAL CAMERA TG 320 Instruction Manual e Thank you for purchasing an Olympus digital camera Before you start to use your new camera please read these instructions carefully to enjoy optimum performance and a longer service life Keep this manual in a safe place for future reference e We recommend that you take test shots to get accustomed to your camera before taking important photographs e In the interest of continually improving products Olympus reserves the right to update or modify information contained in this manual Step 7 Checking the contents of the box Lithium USB cable AV cable USB AC adapter F 2AC OLYMPUS Setup lon Battery CD ROM LI 42B Other accessories not shown Warranty card Contents may vary depending on purchase location Step 2 Preparing the Camera Step 3 Shooting and Playing Back Images Preparing the Camera p 13 Shooting Playback and Erasing p 19 Step 4 How to Use the Camera Step 5 Printing Camera Settings p 3 Direct printing PictBridge p 54 Print Reservations DPOF p 57 Contents gt Names of Parli uiio iisi 9 gt Menus for Playback Editing and Printing gt Preparing the Camera 13 Functions ra gt Shooting Playback and Erasing 19 gt Menus for Other Camera Settings gt Using Shooting Modes 2g Printing 54 gt Using Shooting F
36. PJ Beach amp Snow Snapshot Q Pet Mode Cat 49 Pet Mode Dog The camera takes a picture using the optimum settings for the scene conditions When the subject is dark noise reduction is automatically activated This approximately doubles the shooting time during which no other pictures can be taken To take underwater photos Select Snapshot Important information about water and shock resistant features p 68 To lock the focus distance for underwater shoots AF lock When Snapshot is selected press the button AF lock mark o To cancel press the button again to clear the AF lock mark To take pictures of your pet s face select Q Pet Mode Cat amp 9 Pet Mode Dog Use lt I gt to select 86 or 4 amp 9 and press the button to set e Auto Release is automatically selected and when the subject s face is recognized the picture is taken automatically To cancel Auto Release see Using the self timer p 35 Shooting with special effects MAGIC mode To add expression to your photo select the desired special effect 1 Set the shooting mode to MAGIC LETS EN 29 3 Use lt to select the desired effect and then Creating panoramic images H mode press the button to set 1 Set the shooting mode to M Icon indicating MAGIC mode that is set Shooting mode Option 2 Press V to go to the submenu Pop Art Pin Hole
37. SHIPMENT PRODUCT FAILURE PRODUCT DESIGN SELECTION OR PRODUCTION IMAGE OR DATA LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE WHETHER LIABILITY IS ASSERTED IN CONTRACT TORT INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY OR OTHERWISE IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE Representations and warranties made by any person including but not limited to dealers representatives salespersons or agents of Olympus which are inconsistent or in conflict with or in addition to the terms of this limited warranty shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized officer of Olympus This limited warranty is the complete and exclusive statement of Warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements understandings proposals and communications pertaining to the subject matter hereof This limited warranty is exclusively for the benefit of the original customer and cannot be transferred or assigned WHAT TO DO WHEN SERVICE IS NEEDED The customer must transfer any image or other data saved on a Product to another image or data storage medium and or remove any fi
38. SO p 36 9 Drive p 37 10 Date stamp p 42 11 Recording with sound movies sp 42 12 World time 53 13 Image stabilization still 41 images x 40 14 Metering 15 Shadow Adjustment Technology p 40 16 Compression still images a ANE p 39 67 17 Image size still images RO PUNKTE p 39 67 18 Number of storable still pictures still images 19 Current memory 20 Movie recording icon p 20 21 Remaining recording time movies p 20 22 Image size movies 23 Histogram 24 AF target mark 25 Camera shake warning 26 Aperture value 27 Shutter speed EN 11 Playback mode display e Standard display 1 23 45 67 P Daw Daw Paua WU Still image e Advanced display 1 23 45 67 3D0x10 OH 4 30 Pru 11000 F3 5 2 0 LE we DE i ud Em 88100 0004 11 02 26 00 00 12 EN 11 12 13 14 1 1000 F3 5 OF Noku 2m Gf 100 0004 11 02 26 00 00 1 Battery check 2 3D images 3 Print reservation number of prints p 57 p 56 4 Protect p 46 5 Adding sound p 42 44 6 Current memory p 66 7 Frame number total number of images still images 8 Volume 9 Elapsed time total recording time movies p 23 10 Histogram p 22 11 Shutter speed p 20 12 Aperture value p 20 131SO 36 p 35 15 White balance p 36 16 Compression
39. acro 2 cm 0 8 in to the subject Subjects photos P at 50 cm 19 7 in or farther cannot be Fill In The flash fires regardless of the brought into focus available light When the zoom is at the widest W position Flash Off The flash does not fire When the zoom is at the most telephoto T position 34 EN 5 The zoom is automatically fixed o The flash p 34 and zoom p 21 cannot be set when Ws Super Macro p 34 is selected Using the self timer After the shutter button is pressed all the way down the picture is taken after a short delay 1 Select the self timer option in the shooting function menu 2 Use lt D to select the setting option and press the button to set Option Description X Off The self timer is deactivated The self timer lamp turns on for A approx 10 seconds then blinks for 12 sec approx 2 seconds and then the picture is taken d The self timer lamp blinks for approx 2sec 2 seconds then the picture is taken When your pet cat or dog turns its iro Auto head towards the camera its face is Release recognized and the picture is taken automatically 1 Auto Release is displayed only when the SCN mode is 89 or 49 4 Self timer shooting is automatically canceled after one shot To cancel the self timer after it starts Press the MENU button Adjusting the brightness Exposure compensation The standard brightness appropr
40. age to the camera To avoid such damage wash the camera using the following method Insert the battery and close the battery card connector cover firmly so that lock makes the clicking sound 2 Fill a bucket or other container with fresh water immerse the camera facing downward in the bucket and shake the camera thoroughly Or rinse the camera by placing it directly under a strong stream of tap water Storage and Maintenance Do not leave the camera in an environment at high temperature 40 C 104 F or more or at low temperature 10 C 14 F or less Failure to do so may break down water resistance Do not use chemicals for cleaning rust prevention anti fogging repairing etc Failure to do so may break down water resistance Do not leave the camera in water for a long time Prolonged exposure to water will cause damage to the camera s appearance and or deteriorate water resistance In order to preserve the water resistant feature as with any underwater housing it is recommended that the waterproof packing and seals are replaced annually For the Olympus distributors or service stations where the waterproof packing can be replaced visit Olympus website for your local area Closing Battery card connector cover Battery card connector cover o The included accessories e g USB AC adapter do not offer shock or water resistance EN 69 SAFETY PRECAUTIONS CAUTION
41. apacity 740 mAh Battery life Approx 300 full charges varies on usage Operating environment Temperature 0 C to 40 C 32 F to 104 F charging 10 C to 40 C 14 F to 104 F operation USB AC adapter ee Model No F 2AC 1A F 2AC 2A F 2AC 1B F 2AC 2B Power requirements AC 100 to 240 V 50 60 Hz Output DC5V 500 mA Operating environment Temperature 0 C to 40 C 32 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Design and specifications subject to change without notice Using in low temperatures Low temperature operation of the Olympus lithium ion battery is guaranteed to 0 C 32 F However the Olympus lithium ion battery has been tested for use with this product in temperatures up to 10 C 14 F Olympus lithium ion battery LI 42B The number of storable still pictures is reduced in low temperatures HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE 80 EN OLYMPUS KOREA CO LTD 10F Olympus Tower A 114 9 Samsung dong Gangnam gu Seoul Korea 135 090 http www olympus co kr Tel 1544 3200 OLYMPUS MALAYSIA SDN BHD 10 8 Menara 1 MK Kompleks 1 Mont Kiara No 1 Jalan Kiara Mont Kiara 50480 Kuala Lumpur Malaysia Tel 603 6411 0000 Fax 603 6411 0003
42. b PC software EN 53 Printing Direct printing PictBridge By connecting the camera to a PictBridge compatible printer you can print images directly without using a computer To find out if your printer supports PictBridge refer to the printer s instruction manual PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly The printing modes paper sizes and other parameters that can be set with the camera vary depending on the printer that is used For details refer to the printer s instruction manual For details on the available paper types loading paper and installing ink cassettes refer to the printer s instruction manual Printing images at the printer s standard settings Easy Print In the setup menu set USB Connection to Print USB Connection p 48 1 Display the image to be printed on the monitor o Viewing images p 22 54 EN 2 Turn on the printer and then connect the printer and camera De D button Multi connector Easy Print Start Custom Print 3 Press gt to start printing 4 To print another image use lt gt to select an image and press the button To exit printing After a selected image is displayed on the screen disconnect the USB cable from the camera and printer Changing the printer s settings for printing Custom Print 1 Follow Steps
43. be sure to cover their terminals and always observe local laws and regulations LCD Monitor Do not push the monitor forcibly otherwise the image may become vague resulting in a playback mode failure or damage to the monitor A strip of light may appear on the top bottom of the monitor but this is not a malfunction When a subject is viewed diagonally in the camera the edges may appear zigzagged on the monitor This is not a malfunction it will be less noticeable in playback mode In places subject to low temperatures the LCD monitor may take a long time to turn on or its color may change temporarily When using the camera in extremely cold places it is a good idea to occasionally place it in a warm place An LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures The LCD used for the monitor is made with high precision technology However black spots or bright spots of light may appear constantly on the LCD Monitor Due to its characteristics or the angle at which you are viewing the monitor the spot may not be uniform in color and brightness This is not a malfunction Legal and Other Notices Olympus makes no representations or warranties regarding any damages or benefit expected by using this unit lawfully or any request from a third person which are caused by the inappropriate use of this product Olympus makes no representations or warranties regarding any damag
44. bject s y eyes D Use A V to select a correction item and press the button 2 Use JD to select an image for retouching and press the button e The retouched image is saved as a separate image When Clear Skin is selected Use A V to select the retouching level and press the button Clear Skin For information on using the menus see Setup menu p 6 Brightening areas that are dark due to backlight or other reasons Shadow Adj Playback menu amp Edit Shadow Adj Use lt to select an image and press the button e The edited image is saved as a separate image o Depending on the picture the editing may not be effective o The retouching process may lower the image resolution Retouching red eyes in flash shooting Redeye Fix x Playback menu gt Edit P Redeye Fix Use lt to select an image and press the button e The edited image is saved as a separate image o Depending on the picture the editing may not be effective o The retouching process may lower the image resolution Erasing images Erase x Playback menu gt Erase Submenu 2 Application All Erase All images in the internal memory or card will be erased Sel Image Images are individually selected and erased Erase Deletes the image displayed EN 45 Foi o When erasing pictures in the internal memory do not insert the card into the camera Before erasing
45. card connector cover 3 Register your Olympus product Click the Registration button and follow the on screen instructions 4 Install OLYMPUS Viewer 2 and ib computer software e Check the system requirements before beginning installation Click the OLYMPUS Viewer 2 or OLYMPUS ib button and follow the on screen instructions to install the software OLYMPUS Viewer 2 Operating Windows XP Service Pack 2 or later System Windows Vista Windows 7 Processor Pentium 4 1 3 GHz or better 1 GB or more 2 GB or more mE recommended Free Hard 1 GB or more Drive Space Monit 1024 x 768 pixels or more oniar Minimum 65 536 colors 16 770 000 Settings colors recommended ib Operating Windows XP Service Pack 2 or later System Windows Vista Windows 7 Pentium 4 1 3 GHz or better Processor Pentium D 3 0 GHz or better required for movies 512 MB or more 1 GB or more RAM recommended 1 GB or more required for movies 2 GB or more recommended Free Hard 1 GB or more Drive Space Monit 1024 x 768 pixels or more Anon Minimum 65 536 colors 16 770 000 Settings colors recommended G I A minimum of 64 MB video RAM with raphics DirectX 9 or later Seeonline help for information on using the software 5 Install the camera manual Click the Camera Instruction Manual button and follow the on screen instructions Macintosh 1 Insert th
46. d SD SDHC SDXC memory cards p 67 68 To remove the SD SDHC SDXC memory card and Eye Fi card o Press the card in until it clicks and comes out slightly then remove the card Shooting Playback and Erasing Shooting with the optimum aperture Current shooting mode display value and shutter speed P mode In this mode automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions such as exposure compensation white balance etc as needed 1 Press the ON OFF button to turn on the camera P mode indicator o Press the ON OFF button again to turn off the camera 2 Hold the camera and compose the shot Number of storable still pictures p 67 Monitor standby mode screen If P mode is not displayed press lt to display the function menu screen and then set the shooting mode to P Using the Menu p 5 Vertical grip When holding the camera take care not to cover the flash with your fingers etc EN 19 3 Press the shutter button halfway down to Shooting itiOvies focus on the subject e When the camera focuses on the subject the 1 Press the movie record button to start exposure is locked shutter speed and aperture recording value are displayed and the AF target mark changes to green e The camera was unable to focus if the AF target mark flashes red Try focusing again Continuous recording length p 68 AF ta
47. d warning sound x Volume 0 1 2 3 4 5 Selects the image playback volume Volume 0 1 2 3 4 5 Selects the operation volume of camera buttons Resetting the file names of pictures File Name Yh Settings 2 gt File Name Folder name Folder name File name Submenu 2 Application DCIM 1000LYMP Pmdd0001 jpg This resets the sequential number for the folder name and file name im im Reset whenever a new card is inserted This is useful when grouping images on separate cards Even when a new card is inserted this continues the numbering for 9990LYMP Pmdd9999 jpg the folder name and file name from D Auto the previous card This is useful for managing all image folder names and files names with sequential Automatic Automatic numbers numbering numbering The number for the folder name is reset to 100 and the one for the file name is reset to 0001 Month 1 to C A October B November Pm C December Day 01 to 31 EN 49 For information on u ig the menus see Setup menu p 6 Adjusting the CCD and the image Adjusting the brightness of the monitor processing function Pixel Mapping c2 Yh Settings 2 amp Pixel Mapping Yh Settings 2 gt IO o This function has already been adjusted at factory A j shipping and no adjustment is needed right To adjust the monitor brightness after purchase Approximately once a year is Use A V to adjust the brightness while viewing the recommended
48. deo input jack yellow and audio input jack white Open the battery card connector cover in the direction of the arrow Connection via HDMI cable On the camera select the digital signal format that will be connected 480p 576p 720p 1080i 2 Connect the TV and camera When set to 1080i 1080i format takes priority for HDMI output However if this setting does not match the input setting of the TV the signal format is changed first to 720p and then to 480p 576p For details on changing the input setting of the TV refer to the TV s instruction manual o When the camera is connected to the computer by the USB cable do not connect the HDMI cable to the camera 4 Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV When the camera and TV are connected by both an AV cable and an HDMI cable the HDMI cable will take priority HDMI micro connector A Connect to the HDMI tor on the TV gt HDMI cable type D sola COMMESHOF on the separately CB HD1 Open the battery card connector cover in the direction of the arrow EN 51 Coe SC e Type D CB HD1 Turn on the TV and change INPUT to VIDEO an input jack connected to the camera For details on changing the input source of the TV refer to the TV s instruction manual 4 Turn on the camera and use JP to select the image for playback Depending on the TV s se
49. e receiver is connected Consult your dealer or an experienced radio TV technician for help Only the OLYMPUS supplied USB cable should be used to connect the camera to USB enabled personal computers PC Any unauthorized changes or modifications to this equipment would void the user s authority to operate it Use Only Dedicated Rechargeable Battery Battery Charger and USB AC adapter We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery battery charger and USB AC adapter with this camera Using a non genuine rechargeable battery battery charger and or USB AC adapter may result in fire or personal injury due to leakage heating ignition or damage to the battery Olympus does not assume any liability for accidents or damage that may result from the use of a battery battery charger and or USB AC adapter that are not genuine Olympus accessories For customers in North and South America For customers in USA Declaration of Conformity Model Number TG 320 Trade Name OLYMPUS Responsible Party OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Telephone Number 484 896 5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Address This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept an
50. e supplied CD in a CD ROM drive Double click the CD OLYMPUS Setup icon on the desktop Double click the Setup icon to display the Setup dialog 2 Install OLYMPUS Viewer 2 Check the system requirements before beginning installation Click the OLYMPUS Viewer 2 button and follow the on screen instructions to install the software You can make user registration via Registration in OLYMPUS Viewer 2 Help EN 15 OLYMPUS Viewer 2 Operating Mac OS x v10 4 11 v10 6 System Processor Intel Core Solo Duo 1 5 GHz or better RAM 1 GB or more 2 GB or more recommended rre Hard 1 GB or more Drive Space Monitor 1024 x 768 pixels or more Minimum 32 000 colors 16 770 000 Settings colors recommended Other languages can be selected from the language combo box For information on using the software see online help 3 Copy the camera manual Click the Camera Instruction Manual button to open the folder containing the camera manuals Copy the manual for your language to the computer Charging the battery with the included USB AC adapter The included USB AC adapter F 2AC hereafter referred as USB AC adapter has been designed to be used for charging and playback Make sure that shooting is not being used while the USB AC adapter is connected to the camera 16 EN Example USB AC adapter with an AC cable 1
51. ect the quantity Press the amp button 5 Use A V to select the C7 date print screen option and press the button Submenu 2 Application No This prints the image only Date This prints the image with the shooting date Time This prints the image with the shooting time 6 Use A V to select Set and press the button Reserving one print each of all images on the card 15 1 Follow Steps 1 and 2 in 1 p 57 2 Use A V to select 5 and press the button 3 Follow Steps 5 and 6 in L4 Resetting all print reservation data 1 Follow Steps 1 and 2 in 1 p 57 2 Select either L1 or 5 and press the button 3 Use A V to select Reset and press the button EN 57 Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 in 1 p 57 2 Use A V to select 1 and press the button 3 Use A V to select Keep and press the button 4 Use ID to select the image with the print reservation you want to cancel Use A V to set the print quantity to 0 5 If necessary repeat Step 4 and then press the button when finished 6 Use A V to select the C date print Screen option and press the button e The settings are applied to the remaining images with the print reservation data 7 Use A V to select Set and press the button 58 EN Usage Tips If the camera does not work as intended or if an error message is displayed on the scr
52. ed pictures can be taken at a high shutter speed even at locations where a flash cannot be used Selecting the ISO sensitivity p 36 Exposure brightness DN Z t Taking pictures with the right brightness e Taking pictures of a subject against a backlight Faces or backgrounds are bright even when shot against backlight Shadow Adjust p 40 e Taking pictures using Face iESP p 40 Appropriate exposure is obtained for a face against backlight and the face is brightened e Taking pictures using for ESP p 40 Brightness is matched with a subject in the center of the screen and the image is not affected by background light e Taking pictures using Fill In p 34 flash A subject against backlight is brightened e Taking pictures of a white beach or snow scene Set the mode to F4 Beach amp Snow p 29 e Taking pictures using exposure compensation p 35 Adjust the brightness while viewing the screen for taking the picture Normally taking pictures of white subjects such as snow results in images that are darker than the actual subject Use the exposure compensation to adjust in the positive direction to express whites as they appear When taking pictures of black subjects on the other hand it is effective to adjust in the negative direction 62 EN Color hue Taking pictures with colors at the same shade as they appear Taking pictures by selecting white balance p 36
53. ee does not cover the following and the customer will be required to pay repair charge even for defects occurring within the Guarantee period referred to above 76 EN a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service station c Any defect or damage that occurs due to transport a fall shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When the Guarantee Certificate is not returned with the product i When any alterations whatsoever are made to the Guarantee Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Guaran
54. een and you are unsure of what to do refer to the information below to fix the problem s Troubleshooting Battery The camera does not work even when batteries are installed e Insert recharged batteries in the correct direction Inserting the battery p 13 Charging the battery and setting up using the supplied CD p 13 Charging the battery with the included USB AC adapter p 16 e Battery performance may have been reduced temporarily due to low temperature Take the batteries out of the camera and warm them by putting them in your pocket for a while Card Internal memory An error message is displayed Error message p 60 Shutter button No picture is taken when the shutter button is pressed e Cancel sleep mode To save battery power the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on No picture is taken even if the shutter button is fully pressed in this mode Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture If the camera is left for another 12 minutes it automatically turns off Press the ON OFF button to turn the camera on e Press the gt button to switch to the shooting mode Wait until amp flash charge stops blinking before taking pictures With prolonged camera use the internal temperature may increase resulting in a
55. enu 1 gt Reset Submenu 2 Application Restores the following menu functions to the default settings Shooting mode p 28 Flash p 34 Macro p 34 Self timer p 35 Exposure compensation p 35 White balance p 36 ISO p 36 Drive p 37 Menu functions in Ch 282 9 p 38 to 42 No The current settings will not be changed Yes 38 EN For information on using the menus see Setup menu p 6 Selecting the image quality for still images Image Size Compression Qh Shooting menu 1 f Image Size Compression Submenu 1 Submenu 2 Application 14M 4288x3216 Suitable for printing pictures over A3 11x17 in 8M 3264x2448 Suitable for printing pictures up to A3 11x17 in 5M 2560x1920 Suitable for printing pictures at A4 8 5x11 in 3M 2048x1536 Suitable for printing pictures up to A4 size 8 5x11 in 2M 1600x1200 Suitable for printing pictures at A5 5x7 in Image Size 1M 1280x960 Suitable for printing pictures at postcard size VGA 640x480 caer for viewing pictures on a TV or using pictures on emails and web 16 90 4288x2416 ar for playing pictures on a widescreen TV and for printing on A3 or 16 98 1920 1080 oe for playing pictures on a widescreen TV and for printing on A5 or Fine Shooting at high quality Compression Normal Shooting at normal quality o Number of storable pictures still images Co
56. eparate image with a smaller size for use in e mail attachments 320 x 240 and other applications Use 1D to select an image 2 Use A V to select an image size and press the button e The resized image is saved as a separate image 44 EN ig the menus see Setup menu p 6 Cropping image FF x Playback menu gt Edit P pt Use lt to select an image and press the amp button 2 Use the zoom buttons to select the size of the cropping frame and use A V IP to move the frame Cropping frame Press the button after you have selected the area to trim e The edited image is saved as a separate image Adding sound to still images 8 Playback menu gt Edit gt amp D Use lt I gt to select an image 2 Aim the microphone toward the sound source Microphone LO o Cm Press the button Recording starts The camera adds records sound for approx 4 seconds while playing back the image Retouching the skin and eyes Beauty Fix x Playback menu Edit Beauty Fix Depending on the picture the editing may not be effective Submenu 3 Submenu 4 Application Clear Skin Sparkle All Eye and Dramatic Eye are applied together Makes skin look smooth Clear Skin Soft Ava Hard and translucent Select 9 the correction effect from 3 levels Enhances the contrast Sparkle Eye a of the eyes Dramatic Eye _ Enlarges the su
57. es or any benefit expected by using this unit lawfully which are caused by erasing picture data Disclaimer of Warranty Olympus makes no representations or warranties either expressed or implied by or concerning any content of these written materials or software and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use or inability to use these written materials or software or equipment Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages or of the implied warranty so the above limitations may not apply to you Olympus reserves all rights to this manual Warning Unauthorized photographing or use of copyrighted material may violate applicable copyright laws Olympus assumes no responsibility for unauthorized photographing use or other acts that infringe upon the rights of copyright owners Copyright Notice All rights reserved No part of these written materials or this software may be reproduced or used in any form or by any means electronic or mechanical including photocopying and recording or the use of any type of information storage and retrieval system without the prior written permission of Olympus No liabilit
58. es or those of another child Accidentally being injured by the moving parts of the camera Do not look at the sun or strong lights with the camera Do not use or store the camera in dusty or humid places Do not cover the flash with a hand while firing Use SD SDHC SDXC memory cards or Eye Fi cards only Never use other types of cards If you accidently insert another type of card into the camera contact an authorized distributor or service center Do not try to remove the card by force A CAUTION Stop using the camera immediately if you notice any unusual odors noise or smoke around it Never remove the batteries with bare hands which may cause a fire or burn your hands Do not leave the camera in places where it may be subject to extremely high temperatures Doing so may cause parts to deteriorate and in some circumstances cause the camera to catch fire Do not use the charger or USB AC adapter if it is covered such as a blanket This could cause overheating resulting in fire Handle the camera with care to avoid getting a low temperature burn When the camera contains metal parts overheating can result in a low temperature burn Pay attention to the following When used for a long period the camera will get hot If you hold on to the camera in this state a low temperature burn may be caused n places subject to extremely cold temperatures the temperature of the camera s body may be lower
59. he printer s standard settings 6 Use ID to select an image 7 Press A to make a print reservation for the current image Press V to make the detailed printer settings for the current image EN 55 To make the detailed printer settings Use AV lt I gt to select the setting and press the amp button Submenu 5 Submenu 6 Application This selects the number Ox Bto 10 of prints Selecting With prints the images with the date Selecting Without prints the images without the date Date With Without Selecting With prints the file name on the image With Without Selecting Without does not print any file name on the image File Name Proceeds to H the setting screen This selects a portion of the image for printing To crop an image F1 Use the zoom buttons to select the size of the cropping frame use A V IP to move the frame and then press the 9 button Cropping frame Use A V to select OK and press the button 8 If necessary repeat Steps 6 and 7 to select the image to be printed make the detailed settings and set Single Print 56 EN 9 Press the amp button Print Cancel 10 Use A V to select Print and press the button Printing starts When Option Set is selected in All Print mode Print Info screen is displayed When printing is finished the Print Mode Select screen is displayed Print Mode
60. iate exposure set by the camera based on the shooting mode except for iAUTO can be adjusted brighter or darker to obtain a desired shot 1 Select the exposure compensation option in the shooting function menu Exposure Comp 2 Use lt D to select the desired brightness and press the 9 button EN 35 Adjusting to a natural color scheme White balance For more natural coloring choose a white balance option suited to the scene 1 Select the white balance option in the shooting function menu WB P WB Auto C wv g Mor A Es A EET 2 Use lt to select the setting option and press the 9 button to set Option Description The camera automatically adjusts WB Auto the white balance according to the shooting scene For shooting outdoors under a clear sky For shooting outdoors under a cloudy sky 0 x For shooting under tungsten lighting For shooting under white fluorescent lighting in an office etc 36 EN Selecting the ISO sensitivity 1 Select the ISO setting option in the shooting function menu 2 Use lt D to select the setting option and press the amp button to set Option Description The camera automatically adjusts the sensitivity according to the shooting scene ISO Auto The camera uses a higher sensitivity compared to ISO Auto to minimize blur caused by a moving subject or by camera shake High ISO Auto
61. ient power before starting the backup Using an Eye Fi card commercially available Eye Fi 1T Settings 1 gt Eye Fi Submenu 2 Application off Disable Eye Fi communication On Enable Eye Fi communication o When using an Eye Fi card read the Eye Fi card instruction manual carefully and comply with the instructions o Use the Eye Fi card in compliance with the laws and regulations of the country where the camera is used o In locations such as on an airplane where the Eye Fi communication is prohibited remove the Eye Fi card from the camera or set Eye Fi to Off This camera does not support the Eye Fi card s Endless mode EN 47 Foi Selecting a method for connecting the camera to other devices USB Connection 1T Settings 1 gt USB Connection formai Submenu 2 Application When the camera is connected to Auto another device the settings selection screen is displayed Select when connecting the camera Storage 3 to a computer via a storage device Select when transferring images MTP without using the supplied ib PC software on Windows Vista Windows 7 Print Select when connecting to a PictBridge compatible printer System requirements Windows Macintosh Windows XP Service Pack 1 or later Windows Vista Windows 7 Mac OS X v10 3 or later o When using another system other than Windows XP SP2 or later Windows Vista Windows 7 set to Storage
62. if these written materials or software and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use of inability to use these written materials or software Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the above limitations may not apply to you 78 EN Trademarks IBM is a registered trademark of International Business Machines Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation Macintosh is a trademark of Apple Inc The SDHC SDXC logo is a trademark Eye Fi is a registered trademark of Eye Fi Inc All other company and product names are registered trademarks and or trademarks of their respective owners The standards for camera file systems referred to in this manual are the Design rule for Camera File system DCF standards stipulated by the Japan Electronics and Information Technology Industries Association JEITA THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
63. ing Shooting Modes To change the shooting mode The shooting mode P iAUTO SCN MAGIC M 3D Using the best mode for the shooting scene SCN mode can be changed using the function menu Using the Menu p 5 The default settings of the function are highlighted in 1 Set the shooting mode to SCN Shooting with automatic settings iAUTO mode The camera will automatically select the optimal shooting mode for the scene This is a fully automatic mode that allows you to take a picture suited to the scene by simply pressing the shutter button In jAUTO mode some settings in the shooting menu may not be selected 1 Set the shooting mode to iAUTO The icon changes depending on the scene that the camera automatically selects 3 Use D to select the mode and then press the 9 button to set In some cases the camera may not select the desired shooting mode There are some limitations on settings in AUTO mode When the camera cannot identify the optimal mode P mode will be selected Icon indicating the scene mode that is set 28 EN o In SCN modes the optimum shooting settings are pre programmed for specific shooting scenes For this reason settings may not be changed in some modes Option Application Q Portrait B Beauty fi Landscape WF Night Scene s Night Portrait Sport 44 Indoor ij Candle SU Self Portrait a amp Sunset Fireworks Cuisine I amp Documents
64. ith IEC Standard Publication 529 IPX8 This means that the camera can be used normally under water at a specified water pressure 2 This anti shock performance is confirmed by Olympus testing conditions in accordance with MIL STD 810F Method 516 5 Procedure IV Transit Drop Test For more details of Olympus testing conditions please refer to the Olympus website for your local area Before Use Check the camera for foreign material including dirt dust or sand Be sure to close the battery card connector cover firmly so that lock makes the clicking sound Do not open the battery card connector cover with wet hands while under water or in a damp or dusty environment e g beach After Use Be sure to wipe off any excess water or debris after using the camera under water After the camera is used under seawater immerse the camera in a bucket containing fresh water for about 10 minutes with the battery card connector cover firmly closed After that dry the camera in the shade with good ventilation Water drops may be observed on the inner surface of the battery card connector cover after you open the cover If any water drops are found be sure to wipe them off before using the camera Notes after use Foreign materials may be attached to the camera when using the camera in conditions with foreign materials such as dirt dust or sand If you continue to use the camera in such conditions it could cause dam
65. lem Remove the jammed paper Jammed p Printer problem Petes Return to the status where the 9 printer can be used Printer problem ch Turn off the camera and printer p check the printer for any problems Print Error and then turn the power on again LI No Picture Internal memory Card problem Take pictures before viewing them 1 Cannot Print Problem with selected image Use a computer to print 1 Picture Error Problem with selected image Use photo retouch software etc to view the image on a computer If the image still cannot be viewed the image file is corrupted 4 60 EN computer Before erasing important images download them to a All data will be erased 3 This is displayed for instance when the printer s paper tray has been removed Do not operate the printer while making the print settings on the camera other cameras This camera may be unable to print images taken by Shooting tips When you are unsure of how to take a picture that you envision refer to the information below Object with no vertical lines Focusing tis also effective to compose the shot by holding the Focusing on the subject camera vertically to focus and then returning to the e Taking a picture of a subject not in the center horizontal position to take the picture of the screen After focusing on an object at the same distance as the subject com
66. lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair is excluded EN 77 Notes 1 This Warranty is in addition to and does not affect the customer s statutory right 2 If you have any queries regarding this Warranty call any of the Olympus authorized service stations listed in the instructions Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer Make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed 2 Since this Warranty Certificate will not be re issued keep it in a safe place 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply 4 Where applicable this Warranty is valid worldwide The Olympus authorized service stations listed in this Warranty will gladly honor it Please refer to the appended list for the authorized international Olympus service network Disclaimer of Warranty Olympus makes no representations or warranties either expressed or implied by or concerning any content
67. lies and consumables including but not limited to lamps ink paper film prints negatives cables and batteries and or f Products which do not contain a validly placed and recorded Olympus serial number unless they are a model on which Olympus does not place and record serial numbers EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS GUARANTIES CONDITIONS AND WARRANTIES CONCERNING THE PRODUCTS WHETHER DIRECT OR INDIRECT EXPRESS OR IMPLIED OR ARISING UNDER ANY STATUTE ORDINANCE COMMERCIAL USAGE OR OTHERWISE INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY DURABILITY DESIGN OPERATION OR CONDITON OF THE PRODUCTS OR ANY PART THEREOF OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE OR RELATING TO THE INFRINGEMENT OF ANY PATENT COPYRIGHT OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY THE CUSTOMER MAY ALSO HAVE DIFFERENT AND OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED
68. lm from the Product prior to sending the Product to Olympus for service IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR SAVING KEEPING OR MAINTAINING ANY IMAGE OR DATA SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE OR ON ANY FILM CONTAINED WITHIN A PRODUCT RECEIVED BY IT FOR SERVICE NOR SHALL OLYMPUS BE RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS BEING PERFORMED INCLUDING WITHOUT LIMITATION DIRECT INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR IMPAIRMENT Package the Product carefully using ample padding material to prevent damage in transit and either deliver it to the Authorized Olympus Dealer that sold you the Product or ship it postage prepaid and insured to any of our Olympus Service Centers When returning Products for service your package should include the following Sales receipt showing date and place of purchase Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product unless it is a model on which Olympus does not place and record serial numbers 3 A detailed description of the problem 4 Sample prints negatives digital prints or files on disk if available and related to the problem When service is completed the Product will be returned to you postage prepaid Na
69. ly insert the battery and test the camera functions o Avoid leaving the camera in places where chemical products are handled since this may result in corrosion 64 EN Battery and USB AC adapter This camera uses one Olympus lithium ion battery LI 42B No other type of batteries can be used Caution There is a risk of explosion if the battery is replaced with the incorrect battery type Dispose of the used battery following the instructions p 72 Power consumption by the camera varies depending on which functions are used During the conditions described below power is consumed continuously and the battery becomes exhausted quickly The zoom is used repeatedly The shutter button is pressed halfway repeatedly in shooting mode activating the auto focus A picture is displayed on the monitor for an extended period of time The camera is connected to a printer Using an exhausted battery may cause the camera to turn off without displaying the battery level warning The rechargeable battery is not fully charged at the time of purchase Before using the camera charge it by connecting it to a computer or charge it using the included USB AC adapter F 2AC or charger LI 41C When the included USB AC adapter F 2AC is used charging usually takes approximately 3 hours varies on usage The included USB AC adapter F 2AC is designed to be used for charging Images can be played back on ca
70. me hours and minutes and Y M D date order For precise time setting press the button as the time signal strikes 00 seconds To change the date and time adjust the setting from the menu D Date time p 53 EN 17 5 Use ID to select the fft time zone and then press the button e Use A V to turn daylight saving time Summer on or off D ft 11 02 26 00 00 o The menus can be used to change the selected time zone World Time p 53 6 Use A V ID to select your language and press the 9 button The menus can be used to change the selected language 0 p 52 Inserting an SD SDHC SDXC memory card or Eye Fi card commercially available Always use SD SDHC SDXC memory cards or Eye Fi cards with this camera Do not insert other types of card Using an SD SDHC SDXC memory card or Eye Fi card commercially available p 65 o The camera can shoot and store images using its internal memory without using an SD SDHC SDXC memory card or Eye Fi card The illustrations of the following procedure show the SD memory card 18 EN Write protect switch o Insert the card straight until it clicks into place o Do not touch the contact area directly 2 o Close the battery card connector cover firmly so that lock makes the clicking sound o Number of storable pictures still images Continuous recording length movies in the internal memory an
71. me mobile phone services providers do not permit access or request an additional prefix to 800 numbers For all European Countries not listed and in case that you can t get connected to the above mentioned number please make use of the following CHARGED NUMBERS 449 180 5 67 10 83 or 449 40 237 73 4899 Our Technical Customer Support is available from 9 am to 6 pm MET Monday to Friday OLYMPUS IMAGING CHINA CO LTD Customer Support 400 650 0303 Homepage http www olympus com cn Customer Service Center A8F Ping An International Financial Center No 1 3 Rm 1605 1608 Guangzhou International Electronic tower No403 Xinyuan South Road Chaoyang District Beijing Huan Shi East Road Guang Zhou Tel 86 10 58199199 Fax 86 10 59761360 Zip 100027 Tel 86 20 61227111 Fax 86 20 61227120 Zip 510095 A 32F Shanghai Industrial Investment Building 18 16F Huamin Hanzun Internation Plaza No 1 Fuxing Street Cao Xi Road N Xuhui District Shanghai Chengdu Tel 86 21 60823500 Fax 86 21 60823100 Zip 200030 Tel 86 28 86703531 Fax 86 28 86703532 Zip 610016 OLYMPUS HONG KONG AND CHINA LIMITED Digital Camera Repair Centre L4207 Office Tower Langham Place 8 Argyle Street Mongkok Kowloon Hong Kong Customer Hotline 852 2376 2150 Fax 852 2375 0630 http www olympus com hk 2012 OLYMPUS IMAGING CORP VM289101
72. mera while charging Make sure that shooting is not being used while the USB AC adapter is connected to the camera The included USB AC adapter F 2AC is designed to be used only with this camera Other cameras cannot be charged with this USB AC adapter Do not connect the included USB AC adapter F 2AC to equipment other than this camera For plug in type USB AC adapter The included USB AC adapter F 2AC is intended to be correctly orientated in a vertical or floor mount position Charging the battery by connecting the camera to a computer The battery can be charged by connecting the camera to a computer Using a separately sold USB AC adapter This camera can be used with a separately sold USB AC adapter F 3AC If using the USB AC adapter F 3AC it must be connected using the USB cable included with the camera Do not use any other AC adapter with this camera The AC cable supplied with the USB AC adapter F 3AC is designed to be used only with the USB AC adapter F 3AC Do not use the AC cable with any other products Using a separately sold charger Acharger LI 41C sold separately can be used to charge the battery In this case remove the battery from the camera and set the battery to the charger Using your charger and USB AC adapter abroad The charger and USB AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC 50 60Hz around the world However depending
73. n set to ESP the center may appear dark when shooting against strong backlighting Shooting at higher magnifications than optical zoom Digital Zoom ICI Shooting menu 1 Digital Zoom Submenu 2 Application Off Disable digital zoom On Enable digital zoom 4 Digital Zoom is not available when Ms Super Macro p 34 is selected The option selected for Digital Zoom affects the appearance of the zoom bar To take larger images p 21 Reducing the blur caused by the camera shake when shooting Image Stabilizer still images IS Movie Mode movies Shooting menu 2 gt Image Stabilizer still images D Movie menu gt IS Movie Mode movies Submenu 2 Application The image stabilizer is deactivated This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface Off On The image stabilizer is activated For information on using the menus see Setup menu p 6 The camera s default settings are Image Stabilizer still images to On and IS Movie Mode movies to Off o There may be a noise coming from inside the camera when the shutter button is pressed with Image Stabilizer still images set to On o Images may not be stabilized if camera shake is too severe When the shutter speed is extremely slow such as when taking pictures at night Image Stabilizer still images may not be as
74. nction if it is used in a location where itis subject to a magnetic electromagnetic field radio waves or high voltage such as near a TV set microwave video game loud speakers large monitor unit TV radio tower or transmission towers In such cases turn the camera off and on again before further operation Always observe the operating environment restrictions described in the camera s manual Battery Handling Precautions This camera uses a lithium ion battery specified by Olympus Do not use any other type of battery lf the battery s terminals get wet or greasy camera contact failure may result Wipe the battery well with a dry cloth before use Always charge a battery when using it for the first time or if it has not been used for a long period When operating the camera with battery power at low temperatures try to keep the camera and spare battery as warm as possible A battery that has run down at low temperatures may be restored after it is warmed at room temperature The number of pictures you can take may vary depending on the shooting conditions or battery Before going on a long trip and especially before traveling abroad purchase extra batteries A recommended battery may be difficult to obtain while traveling When storing the battery for a long period select a cool location for storage 72 EN Please recycle batteries to help save our planet s resources When you throw away dead batteries
75. not available in Panorama or 3D Photo mode The date stamp cannot be imprinted when taking sequential shots Recording sound when shooting movies 8 Movie menu gt amp Submenu 2 Application Off No sound is recorded On Sound is recorded o When set to On only the digital zoom can be used during movie recording To record the movie with the optical zoom set 4 movie sound recording to Off For information on using the menus see Setup menu p 6 Menus for Playback Editing and Printing Functions The default settings of the function are highlighted in eo Data must be created with the ib PC software before using some functions o Refer to the ib PC software help guide for details on how to use the ib PC software For details on installing the ib PC software see Charging the battery and setting up using the supplied CD p 13 Playing back pictures automatically Slideshow x Playback menu gt Slideshow Submenu 2 Submenu 3 Application Selects the content Slide AlEvent Ito be included in the Collection slidashow Off Cosmic Breeze BGM Mellow Selects the background music options Dreamy Urban Selects the type of Type Bean transition effect used Fade Zoom between slides Start Starts the slideshow The Collection that has been created with the ib PC software and imported back from a computer can play back
76. ntinuous recording length movies in the internal memory and SD SDHC SDXC memory cards p 67 68 Selecting the image quality for movies Image Size Image Quality amp X Movie menu gt Image Size Image Quality Submenu 1 Submenu 2 Application 720p Image Size VGA 640x480 Select the image quality based on the image size and frame rate QVGA 320x240 Image Quality Fine Normal Select Fine to shoot with higher image quality 4 Number of storable pictures still images Continuous recording length movies in the internal memory and SD SDHC SDXC memory cards p 67 68 When Image Size is set to QVGA Image Quality is fixed to Fine EN 39 Foi Brightening the subject against backlight Shadow Adjust Qh Shooting menu 1 gt Shadow Adjust formai Submenu 2 Application Automatically On when a compatible Auto i shooting mode is selected off The effect is not applied Shoot with automatic adjustment to On brighten an area that has become darker When set to Auto or On ESP C J p 40 is automatically fixed to ESP Selecting the focusing area AF Mode Qh Shooting menu 1 gt AF Mode Submenu 2 Application The camera focuses automatically If a face is detected it is shown by a white frame when the shutter button is pressed halfway and the camera focuses the frame turns to green If no face is detected the camera chooses a subject in
77. on products with weatherproof designs read the weatherproofing sections 70 EN Location To avoid damage to the product mount the product securely on a stable tripod stand or bracket Power Source Connect this product only to the power source described on the product label Lightning If a lightning storm occurs while using a USB AC adapter remove it from the wall outlet immediately Foreign Objects To avoid personal injury never insert a metal object into the product Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Handling the Camera A WARNING Do not use the camera near flammable or explosive gases Do not use the flash and LED including AF illuminator on people infants small children etc at close range You must be at least 1 m 3 ft away from the faces of your subjects Firing the flash too close to the subject s eyes could cause a momentary loss of vision Keep young children and infants away from the camera Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury Becoming entangled in the camera strap causing strangulation Accidentally swallowing the battery cards or other small parts Accidentally firing the flash into their own ey
78. ooting mode and press the amp button To select the function menu Use A V to select a menu and use IP to select a menu option Press the button to set the function menu EN 5 Setup menu Press the MENU button during shooting or playback to display the setup menu The setup menu provides access to a variety of camera settings including options not listed in the function menu display options and the time and date 1 Press the MENU button e The setup menu is displayed 2 Press lt to select the page tabs Use A V to select the desired page tab and press D Page tab eset age Size ompression shadow Adjust F Mode SP G igital Zoom ieu p Image Size Compression Shadow Adjust 2 ESPI Digital Zoom Exit G0 EN 2 Image Size Compression Normal Shadow Adjust Auto AF Mode Face iESP HESS Zea ESP Digital Zoom off Set GY Submenu 1 14M Normal Normal Auto Auto FaceliESP FaceliESP ESI ESP Digital Zoom 14M Normal Auto FaceliESP ESP Of 4 Use A V to select the desired submenu 2 and then press the button Once a setting is selected the display returns to the previous screen o There may be additional operations Menu Settings p 36 to 53 Reset fc Image Size 14M Compression Normal E Shadow Adjust Auto s1 AF Mode Face iESP mesra ESP 1ts Digital zoom On Exit 2 set Qa 5 Press the MENU button to complete the setting
79. p it in a safe place Please refer to the list on the web site http www olympus com for the authorized international Olympus service network For customers in Asia Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during a period of up to one year from the date of purchase this product will be repaired or at Olympus s option replaced free of charge To claim under warranty the customer must take the product and this Warranty certificate before the end of the one year warranty period to the dealer where the product was purchased or any Olympus authorized service station listed in the instructions and request the necessary repairs 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product 3 This warranty does not cover the following and the customer will be required to pay repair charge even for defects occurring within the one year period referred to above a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service s
80. pictures from a memory card insert the card into the camera Protected images cannot be erased To individually select and erase images Sel Image Use A V to select Sel Image and press the amp button 2 Use lt P to select the image to be erased and press the button to add a N mark to the image e Press the W zoom button to display an index view Images can be quickly selected using the AV lt D buttons Press the T button to return to the single frame display Sel Image 8 Repeat Step 2 to select the images to be erased and then press the MENU button to erase the selected images Use A V to select Yes and press the button e The images with a N mark are erased To erase all images All Erase Use A V to select All Erase and press the amp button Use A V to select Yes and press the button 46 EN formai n u g the menus see Setup menu p 6 Saving print settings to the image data Print Order D3 Playback menu gt Print Order Print reservations DPOF p 57 o Print reservation can be set only for still images that are recorded to the card Protecting images di gt Playback menu gt 6 o Protected images cannot be erased by Erase p 24 45 Sel Image p 46 or All Erase p 46 but all images are erased by Memory Format Format p 47 Use lt I gt to select an image 2 Press the button
81. pose the shot and take the When objects are at different picture distances Pressing the shutter button halfway p 20 Set AF Mode p 40 to Face iESP Taking a picture in AF Tracking mode p 40 The camera tracks the subject movement automatically to focus on it continuously e Taking a picture of subjects where autofocus is difficult In the following cases after focusing on an object by pressing the shutter button halfway down with high contrast at the same distance as the subject compose the shot and take the picture Fast moving object The subject is not in the center of the frame bk Subjects with low contrast Camera shake Taking pictures without camera shake e Taking pictures using Image Stabilizer p 41 When a picture is taken of a shadowed subject the CCD shifts to correct for camera shake even if the ISO speed is not increased This function is also effective when taking pictures at a high zoom magnification A device that takes light received through the lens and converts it into electric signals When extremely bright objects appear in the center of the screen EN 61 e Shooting movies using IS Movie Mode p 41 Select amp Sport in the scene mode p 29 The 3 amp Sport mode uses a fast shutter speed and can reduce the blur incurred by a moving subject e Taking pictures at a high ISO sensitivity If a high ISO sensitivity is select
82. pus com this product will be repaired or at Olympus s option replaced free of charge To claim under this warranty the customer must take the product before the end of the applicable national warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Europa Holding GmbH as stipulated on the website http www olympus com During the one year period of the World Wide Guarantee the customer may turn the product in at any Olympus service station Please notice that not in all countries such Olympus service station exists 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product Provisions of Guarantee 1 OLYMPUS IMAGING CORP Shinjuku Monolith 2 3 1 Nishi Shinjuku Shinjuku ku Tokyo 163 0914 Japan grants a one year World Wide Guarantee This worldwide Guarantee must be presented at an Olympus authorized repair service station before any repair can be made under conditions of this Guarantee This Guarantee is valid only if the Guarantee Certificate and proof of purchase are presented at the Olympus repair service station Please note that this Guarantee is in addition to and does not affect the customer s legal warranty rights under the applicable national legislation governing the sale of consumer goods mentioned above 2 This Guarant
83. rget mark Press halfway Recording time Lights up red when recording Shutter speed Aperture value Effects for the selected shooting mode can be used Focusing p 61 when shooting movies when set to F4 mode 3D A mode Beauty in SCN mode or Fish Eye or 4 To take the picture gently press the shutter Sparkle in MAGIC mode shooting is performed in P button all the way down while being careful mode not to shake the camera Sound will also be recorded During sound recording only the digital zoom can be used To record a movie with optical zoom set 8 movies p 42 to Off 2 Press the movie record button again to stop recording Press fully Image review screen To view images during shooting Pressing the gt button enables playback of images To return to shooting either press the gt button or press the shutter button halfway down 20 EN Using the zoom Pressing the zoom buttons adjusts the shooting range Pressing the wide W button Pressing the telephoto T button wa a T On selected for Digital Zoom Optical zoom 3 6x Digital zoom 4x To take larger images Digital Zoom The type and amount of zoom can be identified from the appearance of the zoom bar The display differs depending on the options selected for Digital Zoom p 41 and Image Size p 39 Off selected for Digital Zoom Image size Zoom bar
84. screen and then press the button o For best results wait at least one minute after taking or viewing pictures before performing pixel mapping If the camera is turned off during pixel mapping be sure to perform it again To adjust the CCD and the image processing function Press the button when Start Submenu 2 is displayed e The camera checks and adjusts the CCD and the image processing function at the same time Playing back images on a TV TV Out Yh Settings 2 gt TV Out The TV video signal system varies depending on the countries and regions Before viewing camera images on your TV select the video output according to your TV s video signal type Submenu 2 Submenu 3 Application NTSC Connecting the camera to a TV in North America Taiwan Korea Japan Video Out and so on PAL Connecting the camera to a TV in European countries China and so on 480p 576p HDMI Out 720p Set the playback format 1080i off Operate with the camera HDMI Control On Operate with the TV remote control o The factory default settings differ according to the region where the camera is sold 50 EN For information on using the menus see Setup menu p 6 To play back camera images on a TV e Connection via AV cable Use the camera to select the same video signal system as the one of connected TV NTSC PAL 2 Connect the TV and camera Multi connector Connect to the TV vi
85. st frame and then compose the second shot Before first shot After first shot e After the first shot the area shown in white reappears on the side of the display opposite the pan direction Frame subsequent photographs so that they overlap with the image in the monitor 32 EN Repeat Step until the number of desired frames is taken and then press the button or MENU button when finished o Panorama shooting is possible for up to 10 frames o Refer to the PC software help guide for details on how to make panorama images Shooting 3D images 3D mode In this mode 3D images are shot for viewing on 3D compatible display devices Images shot in 3D mode cannot be displayed in 3D on this camera s monitor 1 Set the shooting mode to 3D i rei D MENU 2 Press V to go to the submenu 3 Use D to select Auto or Manual and then press the button to set Submenu 1 Description After shooting the first frame overlap the subject with the image in the monitor The next frame is taken automatically Auto After shooting the first frame move the camera to overlap the subject with the image in the monitor Then manually release the shutter Manual Depending on the subject or the situation if the distance between the camera and subject is too short the image may not look 3D The 3D viewing angle varies depending on the subject etc Taking pictures with Auto
86. tained in this product never leave the camera in the places listed below no matter if in use or storage Places where temperatures and or humidity are high or go through extreme changes Direct sunlight beaches locked Cars or near other heat sources stove radiator etc or humidifiers In sandy or dusty environments Near flammable items or explosives e In wet places such as bathrooms or in the rain When using products with weatherproof designs read their manuals as well n places prone to strong vibrations EN 71 Never drop the camera or subject it to severe shocks or vibrations When the camera is mounted on or removed from a tripod adjust the position of the camera using the tripod head Do not twist the camera When carrying the camera remove all accessories other than genuine Olympus accessories such as a tripod sold separately Do not touch electric contacts on cameras Do not leave the camera pointed directly at the sun This may cause lens or shutter curtain damage color failure ghosting on the CCD or may possibly cause fires Do not push or pull severely on the lens Before storing the camera for a long period remove the batteries Select a cool dry location for storage to prevent condensation or mold from forming inside the camera After storage test the camera by turning it on and pressing the shutter button to make sure that it is operating normally The camera may malfu
87. tation c Any defect or damage that occurs due to transport a fall shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When this Warranty Certificate is not returned with the product i When any alterations whatsoever are made to the Warranty Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Warranty Certificate This Warranty applies to the product only the Warranty does not apply to any other accessory equipment such as the case strap lens cap and batteries Olympus sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product and in particular any loss or damage caused to any film or
88. tee Certificate This Guarantee applies to the product only the Guarantee does not apply to any other accessory equipment such as the case strap lens cap and batteries Olympus s sole liability under this Guarantee shall be limited to repairing or replacing the product Any liability under the Guarantee for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect of the product and in particular any loss or damage caused to any lenses films other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data is excluded Compelling regulations by law remain unaffected by this Notes regarding Guarantee maintenance 1 This Guarantee will only be valid if the Guarantee Certificate is duly completed by Olympus or an authorized dealer or other documents contain sufficient proof Therefore please make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed or the original invoice or the sales receipt indicating the dealer s name the date of purchase and product type is attached to this Guarantee Certificate Olympus reserves the right to refuse free of charge service if neither Guarantee Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible 2 Since this Guarantee Certificate will not be re issued kee
89. than the environmental temperature If possible wear gloves when handling the camera in cold temperatures Be careful with the strap Be careful with the strap when you carry the camera It could easily catch on stray objects and cause serious damage Do not touch the metallic parts of the camera for a long period of time at low temperatures This may damage your skin At low temperatures handle the camera while wearing gloves Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking overheating burning exploding or causing electrical shocks or burns A DANGER The camera uses a lithium ion battery specified by Olympus Charge the battery with the specified USB AC adapter or charger Do not use any other USB AC adapters or chargers Never heat or incinerate batteries Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry pins fasteners etc Never store batteries where they will be exposed to direct sunlight or subjected to high temperatures in a hot vehicle near a heat source etc To prevent causing battery leaks or damaging their terminals carefully follow all instructions regarding the use of batteries Never attempt to disassemble a battery or modify it in any way solder etc If battery fluid gets into your eyes flush your eyes immediately with clear cold running
90. then erase the images in the internal memory or card Erase p 24 45 Sel Image p 46 All Erase p 46 Memory Format Format p 47 Important information about water and shock resistant features Water resistance The waterproof feature is warranted to operate at depths up to 3 m 9 8 feet for up to one hour The waterproof feature may be compromised if the camera is subject to substantial or excessive impact Shock resistance The anti shock feature warrants the operation of the camera against accidental impact incurred from everyday use of your digital compact camera The anti shock feature does not unconditionally warrant all defective operation or cosmetic damage Cosmetic damage such as scratches and dents are not covered under the warranty As with any electronic device proper care and maintenance are required to preserve the integrity and operation of your camera To maintain camera performance please take your camera to the nearest Olympus Authorized Service Center to have it inspected after any major impact In the event the camera is damaged as a result of negligence or misuse the warranty will not cover costs associated with the service or repair of your camera For additional information on our warranty please visit to the Olympus website for your local area Please observe the following care instructions for your camera 68 EN 1 As determined by Olympus pressure testing equipment in accordance w
91. ttings the displayed images and information may become cropped To operate images with the TV remote control Set HDMI Control to On and turn off the camera Connect the camera and TV with an HDMI cable Connection via HDMI cable p 51 First turn on the TV and then turn on the camera Operate by following the operation guide that is displayed on the TV With some TVs operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen If operations cannot be performed with the TV remote control set HDMI Control to Off and operate using the camera Saving battery power between shots Changing the display language 7 Power Save Yh Settings 2 gt 0 Yh Settings 2 gt Power Save Submenu 2 Application Submenu 2 Application The language for the menus and Off Cancels Power Save Languages error messages displayed on the monitor is selected When the camera is not being used for approx 10 seconds the monitor automatically turns off to save battery power On To resume standby mode Press any button 52 EN For informatio using the menus see Setup menu p 6 Setting the date and time D YB Settings 3 gt Date time time zone and language p 17 To select the date display order a Press D after setting Minute and use A V to select the date display order Y M D Time Press the b
92. unctions 34 Usage Tips 59 gt Menus for Shooting Functions 38 YApPpendiX ea 64 EN Camera Settings Using the Direct Buttons Frequently used functions can be accessed using the direct buttons J Shutter button p 20 59 button switching between shooting and playback p 20 22 48 button camera guide menu guide p 26 EN 3 Operation guide The symbols A V 9P displayed for image selections Arrow pad and settings indicate that the arrow pad shown on the right is to be used A up INFO button changing information display p 22 25 Cancel EY Operation guides displayed at the bottom of the screen indicate that the MENU button button or zoom buttons can be used button Image Size 14M V down Compression Normal T button erase p 24 Shadow Adjust Auto 3 f AF Mode FaceliESP ESP G tt Digital Zoom Operation guide Using the Menu Use the menu to change camera settings such as the shooting mode There may be menus that are unavailable depending on other related settings or the SCN mode p 28 Function menu Press lt during shooting to display the function menu The function menu is used to choose the shooting mode and provides access to frequently used shooting settings Selected option Shooting mode LEX ud Shooting Setup menu To select the shooting mode Use lt to select the sh
93. utomatic shutdown If this occurs remove the battery from the camera and wait until the camera has sufficiently cooled The camera s external temperature may also increase during use however this is normal and does not indicate malfunction Monitor Difficult to see e Condensation may have occurred Turn off the power and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures Dew drops can form in the camera when it is suddenly taken from a cold location into a warm humid room Vertical lines appear on the screen e This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on The lines do not appear however in the final image The light is caught in the picture e Shooting with flash results in an image with many flash reflections on dust in the air Date and time function Date and time settings return to the default setting e If the batteries are removed and left out of the camera for about 3 days the date and time settings return to the default setting and must be reset The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded Date time time zone and language p 17 Miscellaneous The camera makes a noise when taking pictures e The camera may activate the lens and make a noise even if no operation is
94. utton to set 2011 02 26 00 00 To check the date and time Press the INFO button while the camera is turned off The current time is displayed for approx 3 seconds T Cancel EN Choosing home and alternate time zones World Time YB Settings 3 gt World Time You will not be able to select a time zone using World Time if the camera clock has not first been set using C Submenu 2 Submenu 3 Application tt The time in the home time zone the time zone selected for ff in submenu 2 Home Alternate The time in the travel destination time zone the time zone selected for in submenu 2 t Select the home time zone ff MR Select the travel destination time zone In areas where daylight saving time is in effect use A V to turn daylight saving time Summer on When you select a time zone the camera automatically calculates the time difference between the selected zone and the home time zone f to display the time in the travel destination time zone gt Restoring data in the camera Data Repair YB Settings 3 gt Data Repair o Playback will become available by performing Data Repair when the Photo surfing function is not activated properly However data such as collections and other groups created with the ib PC software is deleted from the database in the camera Import the data back into the camera from a computer to playback the data created with the i
95. y interference received including interference that may cause undesired operation For customers in CANADA This Class B digital apparatus complies with Canadian ICES 003 EN 73 OLYMPUS WORLDWIDE LIMITED WARRANTY IMAGING PRODUCTS Olympus warrants that the enclosed Olympus imaging product s and related Olympus accessories individually a Product and collectively the Products will be free from defects in materials and workmanship under normal use and service for a period of one 1 year from the date of purchase If any Product proves to be defective within the one year warranty period the customer must return the defective Product to any of Olympus Service Centers following the procedure set forth below See WHAT TO DO WHEN SERVICE IS NEEDED Olympus at its sole discretion will repair replace or adjust the defective Product provided that Olympus investigation and factory inspection disclose that a such defect developed under normal and proper use and b the Product is covered under this limited warranty Repair replacement or adjustment of defective Products shall be Olympus s sole obligation and the customer s sole remedy hereunder The customer is liable and shall pay for shipment of the Products to the Olympus Service Center Olympus shall not be obligated to perform preventive maintenance installation deinstallation or maintenance Olympus reserves the right to i use reconditioned
96. y is assumed with respect to the use of the information contained in these written materials or software or for damages resulting from the use of the information contained therein Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice FCC Notice Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the user s authority to operate this equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Adjust or relocate the receiving antenna Increase the distance between the camera and receiver Connect the equipment to an outlet on a circuit different from that to which th

Olympus TG-320

Contents

Download Pdf Manuals

Related Search

Related Contents