VIZIO E320AR 31.5" HD-ready Black LCD TV
Contents
1. To enable disable or adjust CEC settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed 3 Use the Arrow buttons on the remote to highlight CEC Settings and press OK The CEC Settings menu is displayed 4 Use the Arrow and OK buttons to adjust each setting CEC Function To use CEC you must select On System Audio Control When system audio control is on you can control your device s audio using the TV s remote control Device Discovery Use this function to determine if your device is connected and supports CEC 5 Press the EXIT button on the remote USING THE HELP MENU Displaying System Information To display a summary of the TV settings You can use the TV s Help menu to Display system information Reset the TV settings STE Restore the TV to its factory Reset TV Settings default settings Start setup wizard VIZIO 1 Press the MENU button on the remote The on screen menu is 4 Help displayed 2 Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed Clear Memory Factory Default Start Setup Wizard 3 Highlight System Info and press OK 4 Use the Up Down Arrow buttons to scroll through the system information 5 When you are finished reviewing the system information press the EXIT butto2. Your TV should be installed and the power cord should be connected to an electrical outlet Your devices should be connected To complete the first time setup 1 Press the Power button on the remote The TV powers on and the Setup App starts 2 Use the Up Down Arrow buttons on the remote to highlight Home Mode Setup and press OK 3 Use the Up Down Arrow buttons on the remote to highlight your time zone and press OK 22 4 Set up Daylight Saving time Press OK then use the Up Highlight Being Scan and press Use the Up Down Arrow buttons to highlight On or Off and press OK Select On when Daylight Saving is in effect Down Arrow buttons to select Cable or Antenna and press OK OK to start channel scan When you have finished the channel scan highlight Exit to Live TV and press OK The First Time Setup is complete Q Unless otherwise stated the Menu illustrations in this gt user guide are based on the E240AR Depending on the input source the menu items may be different Unless otherwise stated the Menu illustrations in this user guide are based on TV input Using the On Screen Menu 5 Your TV features an easy to use on screen menu To open the on screen menu press the MENU button on the remote From this menu you can Change the input source Change the screen aspect ratio Set up closed captioning Activate the sleep timer Adjust the pict
3. VIZIO USER GUIDE INSTALLING YOUR NEW TV CONTROLS amp CONNECTIONS CONNECTING YOUR DEVICES USING THE ON SCREEN MENU USING USB PHOTO SLIDESHOW TROUBLESHOOTING amp SUPPORT SPECS WARRANTY amp LEGAL MODELS E240AR E320AR E420AR E500AR S S 9 SIS StudioSound HD TruVolume SRS StudioSound HD and SRS TruVolume are trademarks of SRS Labs Inc StudioSound HD and TruVolume technologies are incorporated under license from SRS Labs Inc a ENERGY STAR This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the necessary to qualify for ENERGY STAR rating DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories H M HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC elco THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts PRODUCT REGISTRATION To purch
4. WARNING Keep your TV away from moisture Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of yourTV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in accordance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote con
5. IT 3 5mm Cable For Audio VGA Cable For Video 16 CONNECTING A PC E320AR amp E420AR YourTV can be used to display output from a personal computer To use your TV as a PC display 1 Connect a VGA cable not included to your PC and the RGB port on the back of the TV This cable transmits video 2 Connect a 3 5mm cable not included to your PC and the PC Audio In port on the back of the TV This cable transmits audio 3 Set your PC s resolution to match the resolution of your TV See Appendix B Specifications Personal Computer CABLE ANTENNA 3 5mm Cable For Audio oom VGA Cable For Video 17 CONNECTING A PC E500AR Your TV can be used to display output from a personal computer To use your TV as a PC display 1 Connect a VGA cable not included to your PC and the RGB port on the back of the TV This cable transmits video 2 Connect a 3 5mm cable not included to your PC and the PC Audio In port on the back of the TV This cable transmits audio 3 Set your PC s resolution to match the resolution of your TV See Appendix B Specifications Personal Computer VGA Cable For Video E 18 CONNECTING AN AUDIO DEVICE E240AR Your TV can output sound to an audio device such as a receiver or sound bar 1 Verify that your device has an audio port that matches an available port on the TV Optical 3 5mm etc Home Audi
6. differently To change the screen aspect ratio 1 Press the MENU button on the Screen Mode remote 2 Use the Arrow buttons to Zoom __Nofifial Panoramic highlight the Wide icon Press OK 3 Use the Arrow buttons to highlight your desired screen mode and press OK Normal preserves the content s original aspect ratio Since the 4 3 aspect ratio is not large enough to fill the TV s screen black bars are added to the left and right of the display image Wide stretches a 4 3 aspect ratio picture to the edges of the screen Since the picture is being stretched the display image may appear distorted If the program is already formatted for widescreen viewing 1 85 1 or 2 35 1 then black bars will appear on the top and bottom of the display image not available for RGB input Zoom expands images with black bars to fit the screen not avalable for RGB input Panoramic expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 480i 480p source not available for RGB input Stretch expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image Th
7. Class B HDMI 1 4 Dolby Digital Energy Star 100 130 VAC 50 60 Hz 26 30 W IW Yes E320AR English Spanish French des XRTO1O UL CUL FCC Class B HDMI 1 4 Dolby Digital Energy Star 100 130 VAC 50 60 Hz 51 25 W IW Yes 49 E420AR English Spanish French Yes XRTO10 UL CUL FCC Class B HDMI 1 4 Dolby Digital Energy Star 100 130 VAC 50 60 Hz 69 16W IW Yes E500AR English Spanish French Yes XRTO10 UL CUL FCC Class B HDMI 1 4 Dolby Digital Energy Star 100 130 VAC 50 60 Hz 89 34 W IW Yes ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mail TechSupportGVIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 6 00AM to 9 00PM Monday through Friday and 8 00AM to 4 00PM Saturday and Sunday Pacific Time or visit www VIZIO com PRE AUTHOR IZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or c
8. H Be sure the mount you choose is capable of supporting the weight of the TV After you have determined that you have the correct mount for your TV you can begin the installation To install your TV on a wall 1 Disconnect any cables connected to your TV 2 Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 3 Remove the stand by loosening and removing the screws 4 Attach your TV and wall mount to the wall carefully following the instructions that came with your mount Use only with a UL listed wall mount bracket rated for the weight load of this TV See Appendix B Specifications for the weight of this TV For some wall mounts you may want to use cables with right angle connectors This allows the TV to rest closer to the wall Wall Mount Screw Location REAR PANEL E240AR CH CABLE ANTENNA pA e COMPONENT BETTER Stereo Audio Out Connect 3 5mm audio device such as sound bar Coaxial Connect coaxial cable from cable satellite or antenna Component Composite Connect component or composite device PC Audio In Connect 3 5mm audio cable from PC RGB Connect VGA cable from PC HDMI Connect HDMI device USB Connect USB thumb drive to play media Optical Audio Out Connect optical SPDIF audio device such as home audio receiver REAR PAN
9. Menu use the Arrow buttons to highlight Advanced Audio then press OK The Advanced VIZIO Audio menu is displayed Advanced Audio Digital Audio Out 2 Use the Arrow buttons to highlight the setting you Analog Audio Out wish to adjust then press Left Right Arrow buttons to change the setting Digital Audio Out Changes the type of processing for the Optical output when connected to a home theater audio system Select Off Dolby Digital or PCM Select the Digital Audio Output Mode Analog Audio Out Sets the volume control properties for the analog 3 5mm connector when connected to a home theater audio system Select Variable to control the external speakers volume from the TV s volume controls or select Fixed to control the external speakers volume from your home theater system controls 3 When you have finished adjusting the advanced audio settings press the EXIT button on the remote 31 Resetting the Audio Settings To reset the audio se qs ings to the factory default settings Press the MENU button on the remote The on screen menu is displayed Use the Arrow bu ons on the remote to highlight the Audio icon and press OK The Audio Settings menu is displayed Use the Arrow bu press OK The TV d Audio Settings to Highlight Yes and ons to highlight Reset Audio Mode and isplays Are you sure you want to RESET he factory defaults press OK Press the EXIT but
10. icon appears unlocked The channel is accessible Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed When this is the case you can use the TV s Rating Block feature to block content based on its rating For alist of content ratings and their definitions visit Q www tvguidelines org To block or unblock content by its rating 1 From the Parental Controls menu highlight the content type you want to adjust and press OK USA TV USA television program broadcasts USA Movie USA movie broadcasts CAN English Canadian English television program broadcasts CAN French Canadian French television program broadcasts 2 For each rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 When the rating type is blocked the Lock icon appears locked Content with this and all higher ratings cannot be viewed 4 When the rating type is unblocked the Lock icon appears unlocked Content with this and all lower ratings can be viewed 36 5 If you want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to
11. instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket ortable specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have
12. menu highlight Auto Channel Scan and press OK The auto channel scan begins Channel Scan To change the input source from the Settings menu 1 Press the MENU button on the remote The on screen menu is displayed A 2 Wait until the channel scan is 2 Use the Arrow buttons on the remote to highlight the 3 Highlight Input Source and press OK The Input Source 3 Press the EXIT button on the Selection menu is displayed remote 4 Highlight the input source you want to display and press OK Settings icon and press OK The Settings menu is displayed 32 100 complete Highlight Done and press OK Press OK to finish Adding New Channels To add a single new analog channel Occasionally you may need to add a new analog channel or From the Tuner Settings menu add a new range of channels You can do this by using the Partial highlight Add Analog Channel UIZIO Channel Search and Add Analog Channel options and press OK The Add Analog Add Analog Channel Channel menu is displayed Enter Channel Add Channel To add a range of new channels 2 Highlight Enter Channel and use the Number Pad on the remote to enter the number of he channel you are adding 1 From the Tuner Settings menu highlight Partial Channel Search and press OK The Partial Channel Search menu is displayed 2 Highlight Scan Mode and select the type of channel you are adding Analog Digital Analog or Digital 3 Highlight Add Chann
13. to display DVD Player 1 Press the MENU button on the T To change the name of an input remote The on screen menu is cum VIZIO R displayed Menu Language 1 Press the MENU button on the q Name Input English remote The on screen menu is prm rmm 2 Use the ATOW m en me French displayed nput Source 2 remote to highlight the Settings Input Labels Antenna icon and press OK The Settings Spanish 2 Use the Arrow buttons on the Tantannal menu is displayed remote to highlight the Settings icon and press OK The Settings menu is displayed Show keyboard 3 Use the Arrow buttons on the remote to highlight Menu Language and press OK 3 Use the Arrow buttons on the The Menu Language menu is remote to highlight Name displayed Input and press OK The Name EUM nput menu is displayed 4 Highlight your preferred language English French or Select the Menu Language 4 Highlight Input Source and Spanish and press OK press OK Highlight the input you want to rename and press OK 5 Press the EXIT button on the remote 5 If you would like to use a preset input label highlight Input Labels and press OK Highlight the input label you want to use and press OK f you would like to name the input yourself highlight the field below Input Labels and press OK Enter your custom abel using the on screen keyboard Highlight OK and press OK You can also display the on screen keyboard by highlighting Show Keybo
14. 00AR SicloiPan lls nico aiiis i i or ede e Od ect dated 9 Front Panel Remote Control Replacing the Batteries 4 2 Completing the First Time Setup 22 Using the On Screen Menu Navigating the On Screen Menu Changing the On Screen Menu Language 37 Setting the Time and Local Settings 0 eee 38 Adjusting the CEC Settings Using the Help Menu i Displaying System Information ou eee 39 Resetting the TV Settings Restoring the TV to Factory Default Settings Using Setup Wizard T Using the Info Window ou ss 41 Using the USB Media Player Using the USB Photo slideshow Connecting a USB Thumb Drive to the TV Playing USB Media Troubleshooting amp Technical Support 45 MOSCHICO TIONS wc eei et e d eq age Raga 48 Limited Waran arm otto nq a 50 Legal amp Compliance 51 Installing the TV 1 INSPECTING THE PACKAGE CONTENTS Before installing your new TV take a moment to inspect the package contents Use the images below to ensure nothing is missing or damaged VIZIO HDTV Remote Control with Batteries Quick Start Guide Package Contents INSTALLING THE TV After removing the TV from the box and inspecting the package contents you can begin installing the TV Your TV can be installed in two ways On a flat surface using the included stand On a wall usi
15. EL E320AR amp E420AR CABLE ANTENNA o AUDIO RG 7 OMPONENT BETTER Ph Pr X39 Stereo Audio Out Connect 3 5mm audio device such as sound bar Coaxial Connect coaxial cable from cable satellite or antenna Component Composite Connect component or composite device PC Audio In Connect 3 5mm audio cable from PC RGB Connect VGA cable from PC HDMI Connect HDMI device USB Connect USB thumb drive to play media Optical Audio Out Connect optical SPDIF audio device such as home audio receiver REAR PANEL E500AR Stereo Audio Out Connect 3 5mm audio device such as sound bar RGB Connect VGA cable from PC PC Audio In Connect 3 5mm audio cable from PC HDMI Connect HDMI device wens Component Composite Connect component or composite device Coaxial Connect coaxial cable from cable satellite or antenna Optical Audio Out Connect optical SPDIF audio device such as home audio receiver HDMI Connect HDMI device USB Connect USB thumb drive to play media SIDE PANEL POWER Turn TV off or on MENU Open the on screen menu CHANNEL UP DOWN Change the channel VOLUME UP DOWN Increase or decrease volume level INPUT Change input source FRONT PANEL REMOTE SENSOR When using the remote aim it directly at this sensor 10 REMOTE CONTROL INPUT POWER Change the curren
16. appearance of digital closed captions 1 From the Closed Caption menu use the Arrow buttons to VIZIO highlight Digital CC Style Digital CC Style 2 Use the Left Right Arrow canton Custom buttons on the remote to select Text Size Large Custom then press OK The Color White Digital CC Style menu appears Opacity Solid 3 Use the Up Down Arrow BG Colon plack buttons on the remote to BG Opacity Solid highlight the setting you wish Window Color Black o change then use the Left Window Opacity Transparent Right Arrow buttons to change he setting Caption Style Choose ptioning or As Broadcast to keep 9 lor etc default settings or Custom to manually change each setting Text Size Adjust the size of the text Color Change the color of the text Opacity Change the transparency of the text BG Color Change the background color BG Opacity Change the transparency of the background Window Color Change the edge color Window Opacity Change the edge type 4 When you are satisfied with the appearance of the closed captions press the EXIT button on the remote ACTIVATING THE SLEEP TIMER When activated the TV s sleep timer will turn the TV off after a set period of time To use the sleep timer VIZIO 1 Press the MENU button on the remote The on screen menu is Timer Sleep Timer displayed Auto Power Off 10 min 2 Use the Arrow buttons on the remote to
17. ard and press OK 6 When you have finished naming your input press the EXIT button on the remote 37 Setting the Time and Local Settings To ensure the correct ime is displayed when you press the INFO button set the TV s time zone 1 Press the MENU button on the remote The on screen menu is displayed 4 VIZIO Time Zone Alaska US Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed Hawaii US Pacific US CAN Mountain US CAN Use the Arrow buttons on the Central US CAN remote to highlight Time amp Local Settings and press OK he Time amp Local Settings menu is displayed Eastern US CAN Atlantic CAN Newfoundland CAN Indiana US Highlight Time Zone and press OK The Time Zone menu is displayed Arizona US Set your time zone Highlight your time zone and press OK Highlight Daylight Saving and press OK The Daylight Saving menu is displayed Choose On if daylight savings is in effect or Off if it is not Highlight Postal Code Enter your ZIP code using the keypad on the remote then press OK Press the EXIT button on the remote 38 Adjusting the CEC Settings he CEC function on your TV enables you to control HDMI connected devices with the included remote without any additional programming Not all HDMI devices support CEC See your device s user manual for details
18. ase or inquire about accessories and installation services for your VIZIO product visit our website at www VIZIO com or call toll free at 877 878 4946 We recommend that you either Register your VIZIO product at www VIZIO com Complete and mail the enclosed registration card Extended Warranties For peace of mind and to protect your investment beyond the standard warranty VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period To purchase an extended warranty service plan visit www VIZIO com WHEN READING THIS MANUAL accompanying important warning or notice It is intended to alert you to the presence of important operating instructions When you see this symbol please read the When you see this symbol please read the accompanying helpful tip IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV Read these instructions Keep these
19. daptive Luma Medium Contrast Adjusts the white level of the picture When Picture then press OK The Flim Mode Auto this setting is too low the picture may appear dark Advanced Picture menu is When this setting is too high the picture may appear displayed faded or washed out If the setting is too high or too low detail may be difficult to distinguish in dark or 3 Use the Arrow buttons to bright areas of the picture highlight the setting you wish to adjust then press Left Right Color Adjusts the intensity of the picture colors Arrow buttons to change the Reduce Background Picture Noise when Tint Adjusts the hue of the picture This setting is setting ER useful in adjusting the flesh tones in the picture If flesh appears too orange reduce the level of color before adjusting tint Noise Reduction Diminishes artifacts in ihe image caused by the Sharpness Adjusts the edge sharpness of picture digitizing of image motion elements It can be used to sharpen non HD high content Select Off Low definition content however it will not produce detail Medium or High that does not otherwise exist MPEG NR Reduces pixelation and distortion for mpeg files Color Enhancement Reduces oversaturation of some colors and improves flesh tones Select Off Normal Rich Color Grn Flesh and Grn Blue Adaptive Luma Adjusts the average brightness of the picture to compensate for large areas of b
20. e a channel VIZIO Skip Channel 1 From the Tuner Settings menu q highlight Skip Channel and press OK The Skip Channel menu is displayed 2 For each channel you wish to remove use the Up Down Arrow buttons on the remote to highlight the channel and press OK An X appears to th right of each channel you select e 3 When you have selected a of the channels you wish to remove press the EXIT button on the remote Select channels to be skipped when using CH CH 34 Not all programs are broadcast in multiple anguages The MTS feature only works when the program being viewed is being broadcast in the anguage you select A o use the Analog MTS feature VIZIO 1 From the Tuner Settings menu 4 Analog MTS Selec highlight Analog MTS and press OK The Analog MTS menu is displayed Mono Stereo or SAP secondary audio programming Press OK Press the EXIT button on the remote use the Digital MTS feature From the Tuner Settings menu highlight Digital MTS and press OK The Digital MTS menu is displayed Select your preferred language English French or Spanish Press OK Press the EXIT button on the remote Mono Stereo SAP VIZIO 4 Digital MTS English French Spanish Using the Parental Controls The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password Accessing the Pa
21. el and press OK The TV scans for the 3 Highlight From Channel and enter the channel from which channel you want to begin the scan Use the Number Pad on the remote to enter the channel 4 When the TV is done scanning or the channel press the EXIT 4 Highlight To Channel and enter the channel to which you button on the remote Press OK to scan the channel entered want to end the scan Use the Number Pad on the remote o enter the channel 5 Highlight Start and press OK The partial channel search begins 6 Wait until the partial channel search is 100 complete Highlight Done and press OK 7 Press the EXIT button on the remote 33 Skipping Channels After a channel scan is completed you may find that some channels are too weak to watch comfortably There may also be some channels you do not want to view You can remove these channels from the TV s memory with the Skip Channel feature Changing the Audio Language Some digital free to air and cable channels broadcast programs in more than one language The TV s MTS Multichannel Television Sound feature allows you to listen to audio in your preferred language Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad If you wish to completely block a channel from being viewed use the parental controls See Using the Parental Controls on page 35 To remov
22. fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the disp
23. he display image Not available for RGB input Horizontal Size Adjusts the width of the display image FineTune Adjusts the height of the display image RGB input only 4 When you have finished adjusting the size and position press the EXIT button on the remote 29 Resetting the Picture Settings To reset the picture settings to the factory default settings 1 From the Picture menu use the Arrow buttons to highlight More then press OK 2 Use the Arrow buttons on the remote to highlight Reset Picture Mode then press OK The TV displays Are you sure you want to RESET Picture Settings to the factory defaults 3 Highlight Yes and press OK 4 Press the EXIT button on the remote ADJUSTING THE AUDIO SETTINGS To adjust the audio settings VIZIO 1 Press the MENU button on the Audio Settings remote The on screen menu is tL displayed Lip Syne 2 Use the Arrow buttons on the TV Speakers remote to highlight Audio and SRS StudioSound HD Standard press OK The Audio Settings SRS Truvolume O menu is displayed TRE 3 Use the Arrow buttons to Equalizer Settings highlight the setting you wish Reset Audio Mode to adjust then press Left Right Arrow to change the setting Balance Adjusts the loudness of the audio output from the left and right speakers Lip Sync Adjusts the synchronization between the display image and the accompanying audio track Adjus
24. highlight the Sleep Timer icon and press OK The Sleep Timer menu is displayed 3 Use the Up Down Arrow buttons on the remote to highlight Timer and press OK The Timer menu is displayed 4 Use the Up Down Arrow buttons on the remote to highlight the period of time after which you want the TV to turn off 30 60 90 120 or 180 minutes Select the period of time before TV shuts off automatically 5 Press OK then press EXIT Setting the Auto Power Off Feature To help save energy your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen This feature can be deactivated To set the Auto Power Off feature 1 From the Sleep Timer menu use the Up Down Arrow buttons on the remote to highlight Auto Power Off and press OK The Auto Power Off menu is displayed 2 Highlight Off or 10 min and press OK Press Exit 26 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions To adjust the picture settings 1 Press the MENU button on the remote The on screen menu is displayed 4 Picture Picture Mode VIZIO 2 Use the Arrow buttons on the Standard remote to highlight the Picture icon and press OK The Picture menu is displayed Backlight 82 Brightness 50 Contrast 50 3 Use the Arrow buttons on the Color remote to highlight Picture Tint Mode then use the Left Right Sharpness Arrow butt
25. i STEREO AUDIO AV CABLE c8 8 5 COMPONENT CABLE ANALOG BETTER HD VIDEO 1080i STEREO AUDIO DIGITAL HD VIDEO 1080p HD AUDIO HDMI CABLE BEST 14 CONNECTING A DEVICE E500AR Your TV can be used to display output from most devices 1 Verify that your device has a video port that matches an El available port on the TV HDMI Component etc Cable Satellite Box 2 Turn the TV and your device off 3 Connect the appropriate cable not included to the TV and E 4 Turn the TV and your device on Set the TV s input to match the connection you used HDMI Component etc DVD Blu ray Player Game Console BACK OF TV DIGITAL HD VIDEO 1080p HD AUDIO COMPONENT CABLE E WEE HD VIDEO 10801 BETTER stereo auno oe en Connect to component inputs ANALOG H VIDEO 4 amp 0i STEREO AUDIO Maximum Resolution CONNECTING A PC E240AR Your TV can be used to display output from a personal computer To use your TV as a PC display 1 Connect a VGA cable not included to your PC and the RGB port on the back of the TV This cable transmits video 2 Connect a 3 5mm cable not included to your PC and the PC Audio In port on the back of the TV This cable transmits audio 3 Set your PC s resolution to match the resolution of your TV See Appendix B Specifications Personal Computer AUDIO QUT CABLE ANTENNA
26. ightness Viewing Angle HDMI Inputs Component Video Inputs Composite Inputs RF Antenna Input USB 2 0 Ports RGB Inputs Audio Outputs E240AR 24 Class 24 00 22 90 x 15 33 x 4 71 22 90 x 14 31 x 2 13 7 58 lbs 7 05 Ibs Edge Lit LED 60 Hz 1366 x 768 389 mm x 389 mm 6 5 ms 250 nits 178 H 178 V 1 1 Shared w Component 1 1 1 3 5mm Stereo Optical Digital E320AR 32 Class 31 50 30 39 x 20 31 x 7 85 30 39 x 18 88 x 3 86 18 08 Ibs 17 20 Ibs CCFL 60 Hz 1366 x 768 511 mm x 511 mm 100 000 1 8 5 ms 350 nits 176 H 176 V 3 1 Shared w Component 1 1 1 3 5mm Stereo Optical Digital 48 E420AR 42 Class 42 00 39 39 x 25 44 x 9 22 39 39 x 24 01 x 3 80 26 45 lbs 25 48 lbs CCFL 60 Hz 1920 x 1080 484 mm x 484 mm 100 000 1 6 5 ms 300 nits 176 H 176 V 3 1 Shared w Component 1 y 1 3 5mm Stereo Optical Digital E500AR 50 Class 50 00 45 51 x 28 97 x 9 42 45 51 x 27 62 x 3 90 40 79 Ibs 37 70 Ibs CCFL 60 Hz 1920 x 1080 570 x 570 100 000 1 8 ms 350 nits 176 H 176 V 3 1 Shared w Component 1 1 1 3 5mm Stereo Optical Digital OSD Language Ambient Light Sensor Remote Control Model Certifications Compliance Voltage Range Power Consumption Standby Power Zero Bright Pixel Guarantee E240AR English Spanish French No XRTO10 UL CUL FCC
27. is option is only available when the TV is displaying a 720p 1080i 1080p source SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include hem Closed captions display a transcription of a program s dialogue S72 If the program you are viewing is not being broadcast Qs with closed captions the TV will not display them o activate or deactivate closed captions VIZIO 4 Closed Caption 1 Press the MENU button on the remote The on screen menu is displayed Analog Closed Caption toffi Digital Closed Caption off Digital CC Style As Broadcast 2 Use the Arrow buttons on the remote to highlight the CC icon and press OK The Closed Caption menu is displayed 3 Use the Arrow buttons on the remote to highlight the type of closed captions you wish to see Analog Closed Caption for Select Analog Closed Caption modes analog NTSC TV channels Digital Closed Caption for digital ATSC TV channels 4 After highlighting the type of closed captions you wish to see use the Left Right Arrow buttons on the remote to select the caption channel you wish to display then press EXIT For example CC1 may display English captions and CC2 may display Spanish captions e Caption channels usually display different languages 25 Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference To change the
28. issues or any repairs attempted by anyone 50 C otherthan by aVIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data If your VIZIO produc
29. lay The manufacturer s warranty does not cover user abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug yourTV during a lightning storm or when it will not be used for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel
30. n on the remote Resetting the TV Settings To reset the TV s picture and audio settings Display System Information 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed 3 Highlight Reset TV Settings and press OK The TV displays Are you sure you would like to Restore Defaults This will erase any custom settings 4 Highlight Yes and press OK 5 Press the EXIT button on the remote 38 Restoring the TV to Factory Default Settings All of the on screen menu settings can be reset to the factory defaults A If you restore the TV to the factory default settings all changes you have made to the settings will be lost To restore the TV to its factory default settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed 3 Highlight Clear Memory Factory Default and press OK 4 Enter your parental control passcode If you have not yet set up a parental passcode enter the default 0000 he TV displays Are you sure you would like to Restore Defaults This will erase any custom settings 5 Highlight Yes and press OK 6 Wait for the TV to turn off The TV will turn back on shortly afterward and the Setup App will begin 40 Using Se
31. ng a VESA standard wall mount not included Installing the TV Stand Your TV includes a stand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if It is placed on an uneven unstable or non level surface It is pushed pulled or otherwise improperly moved If an earthquake occurs and the TV is not properly secured E320AR E420A E500AR To install the TV stand 1 Place the TV screen down on a clean flat surface To prevent scratches or damage to the screen place the TV on a soft surface such as carpet rug or blanket Align the stand with the TV Attach the stand to the TV by tightening the pre installed screws Move the TV with attached stand into an upright position and place on a flat level and stable surface To ensure proper ventilation leave at least 1 of space between the back of the TV and any other objects walls etc Installing the TV on a Wall o mount your TV on a wall you will need a wall mount Consul he information below to find the appropriate mount for your TV model Installing a TV on a wall requires lifting To prevent Q injury or damage to the TV ask someone to help you E240AR E320AR E420AR E500AR pes M4 M6 M6 M6 Ize Screw Length 12mm 12mm 12mm 12mm Hole 100mm V x 200mm V x 300mm V x 300mm V x Pattern 100mm H 200mm H 300mm H 300mm
32. nt settings in the Picture menu See Resetting the Picture Settings on page 29 Reset the picture settings See Resetting the Picture Settings on page 29 Check all cables to ensure they are securely attached The buttons on the remote aren t working Ensure you are only pressing one button at a time Point the remote directly at the TV when pressing a button Replace the remote batteries with new ones See Replacing the Batteries on page 12 The image quality is not good For the best image quality view high definition programs using digital sources Connect your devices with HDMI cables If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The picture is distorted Nearby electrical devices may be interfering with the TV Separate the TV from electrical appliances cars or flourescent lights Ensure all cables are securely attached The display image does not cover the entire screen If you are in RGB mode computer ensure that H Size and V Position in the on screen menu are set correctly If you are using TV AV or Component with 480i input press the WIDE button on the remote to change the screen mode The TV has pixels dots that are always dark or always lit Your HDTV is precision manufactured using an extremely high level of technology However
33. o Receiver 2 Turn the TV and your audio device off 3 Connect the appropriate cable not included to the TV and the device 1 j 4 Turn the TV and your device on VIZIO Sound Bar 3 5mm Cable Optical SPDIF Cable 18 CONNECTING AN AUDIO DEVICE E320AR amp E420AR Your TV can output sound to an audio device such as a receiver e a or sound bar 1 Verify that your device has an audio port that matches an available port on the TV Optical 3 5mm etc Home Audio Receiver 2 Turn the TV and your audio device off 3 Connect the appropriate cable not included to the TV and the device 1 j 4 Turn the TV and your device on VIZIO Sound Bar 3 5mm Cable Optical SPDIF Cable 20 CONNECTING AN AUDIO DEVICE EBOOAR Your TV can output sound to an audio device such as a receiver or sound bar 1 Verify that your device has an audio port that matches an available port on the TV Optical 3 5mm etc Home Audio Receiver 2 Turn the TV and your audio device off 3 Connect the appropriate cable not included to the TV and the device 1 j 4 Turn the TV and your device on VIZIO Sound Bar 3 5mm Cable Optical SPDIF Cable 21 Completing the First Time Setup The first time you turn on the TV the Setup App will guide you through each of the steps necessary to get your TV ready for use Before you begin the first time setup
34. older Contents Back Button This area displays the contents of the currently ji selected folder You can press OK if you would like Highlight and press OK to return to left column browse between files using to return to the previous screen Current Folder the Arrow and OK buttons i on the remote Displays the folder path Highlight this button and Back Button Connected 4 Source Displays connected USB device MyFlashDrive i Current Folder root Start Fullscreen Slideshow Start Slideshow Sort by Name or Date Name A Z View Thumbnails _ e Thumbnails or Folders I Setti Adjust Slideshow I Le Settings g 1920x1080 1607270KB Photo Infomation Displays name resolution and file size for currently selected photo Page Information If your USB thumb drive has more files than can be displayed on a single screen the page information is displayed here 44 Troubleshooting amp Technical Support A DO YOU HAVE QUESTIONS LET US HELP YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States We can help with New Product Setup Connecting Your Devices Technical Problems And More Phone 877 878 4946 TOLL FREE Email techsupportGVIZIO com Web www VIZIO com support Hours of operation Monday Friday 5 AM TO 9 PM PST Saturday Sunday 8 AM TO 4 PM PST We speak English Se habla E
35. ons to change the picture mode Standard mode sets the various picture settings to Select values that will produce Movie Golf et the best picture in the most cases This is the recommended setting Movie mode sets the picture settings to values perfect for watching a movie in a dark room Game mode optimizes the picture settings for displaying game console output ode Custom Standard Vivid mode sets the picture settings to values that produce a brighter more vivid picture Football Golf Basketball and Baseball modes optimize the picture settings for their respective sports Also try these modes for other sports Custom picture mode allows you to manually change each of the picture settings Backlight Adjusts the brightness to affect the overall Adjusting the Advanced Picture Settings brilliance of he pic ure For the E320AR E420AR To adjust the advanced picture and E500AR this option is only available when both settings VIZIO Ambient Light Sensor and Backlight Control are set 4 Kdvanced Picture to Off 1 From the Picture menu use the Jerem omm Brightness Adjusts the black level of the picture Arrow buttons on the remote to ENS 7 When this setting is too low the picture may be too highlight More then press OK dark to distinguish details When this setting is too 2 Use the Arrow buttons ondhe E wn high the picture may appear faded or washed out remote to highlight Advanced A
36. opy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up
37. ponsible for compliance with the FCC Rules could void the user s authority to operate this equipment 51 2012 VIZIO INC ALL RIGHTS RESERVED 1208140C NC
38. r television viewing Custom allows you to manually change each of the color temperature settings Red Green Blue Gain Adjusts the amount of each color in the display Red Green Blue Offset Adjusts the position of each color in the display 4 If you want to reset the color temperatures to the factory default settings highlight Reset Color Temperature and press OK Then highlight Yes and press OK 5 When you have finished adjusting the color temperature press the EXIT button on the remote 28 Adjusting the Picture Size and Position When displaying an image the size and position of the display image can be adjusted To adjust the picture size and position VIZIO 1 From the Picture menu use the TES ee Arrow buttons on the remote to highlight More then press OK Horiz Position Vertical Position 2 Use the Arrow buttons on the Horizontal Size remote to highlight Size amp Position then press OK The Size amp Position menu is displayed Vertical Size E 3 Use the Arrow buttons to highlight the setting you wish to adjust then press Left Right Arrow buttons to change the setting Auto Sync Automatically adjusts display image to optimal size and position RGB input only Horiz Position Adjusts the horizontal left right position of the display image Vertical Position Adjusts the vertical up down position of the display image Vertical Size Adjust the height of t
39. rental Controls Menu To access the Parental Controls menu 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed 3 Use the Arrow buttons on the remote to highlight Parental Controls and press OK 4 Enter your parental passcode If you have not set a passcode enter the default 0000 The Parental Controls menu is displayed To set a custom parental passcode see Changing the Parental Control Passcode on page 36 35 Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating feature 1 From the Parental Controls menu highlight Rating Enable and press OK The Rating Enable menu is displayed 2 Select On or Off and press OK Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the Parental Controls menu highlight Channel Locks and press OK The Channel Locks menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 When a channel is locked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 When a channel is unlocked the Lock
40. rightness Select Off Low Medium Strong or Extend Film Mode Optimizes the picture for watching film Select Auto or Off Backlight Control Select Off DCR Dynamic Contrast Ratio or OPC Backlight Control setting is not available for the E240AR 27 Ambient Light Sensor The ambient light sensor detects Adjusting the Color Temperature the light levels in the room and automatically adjusts the backlight for the best picture Select Off Low Medium or High Ambient Light Sensor setting is not available for Adjusting the color temperature will change the warmness or coolness of the white areas of the picture the E240AR To adjust the color temperature emm 4 When you have finished adjusting the Advanced Picture 1 From the Picture Menu use 4 E Temperature settings press the EXIT button on the remote the Arrow buttons to highlight Bum Color Temperature More then press OK 2 Use the Arrow buttons on the remote to highlight Color Red Gain Green Gain Temperature then press OK Blue Gain The Color Temperature menu is Red Offset displayed Green Offset 3 Use the Arrow buttons on Blue Offset the remote to highlight Color Reset Color Temperature Temperature then use the Left Right Arrow buttons to change the color temperature preset Cool produces a blue hued picture Menu for V Computer optimizes the picture for use as a PC monitor Normal is optimized fo
41. select On 6 When you are finished adjusting the rating level blocks press the EXIT button on the remote Changing the Parental Control Passcode If you use the parental controls you should change the passcode to prevent children from accessing inappropriate material 1 From the Parental Controls menu highlight Change PIN and press OK The Change PIN menu is displayed 2 In the New PIN field use the Number Pad on the remote to enter your new 4 digit parental control passcode 3 In the Confirm PIN field use the Number Pad on the remote to re enter your new 4 digit parental control passcode 4 Write down your new parental control passcode and save it in a secure location 5 Press the EXIT button on the remote Resetting the Content Locks To reset the content locks to the factory default settings 1 From the Parental Controls menu highlight RESET LOCKS and press OK The TV displays Are you sure you want to RESET ALL LOCKS SETTINGS to the factory defaults 2 Highlight Yes and press OK 3 Press the EXIT button on the remote Changing the Names of the Inputs Changing the On Screen Menu Language To make it easier to recognize the different devices attached to Your TV can display the on screen menu in different languages the inputs on your TV you can rename the inputs For example if you have a DVD player connected to the Component input you To change the on screen menu language can rename that input
42. sometimes pixels may not display correctly These types of occurences are inherent to this type of product and do not constitute a defective product 47 I see When When noise or static on the screen When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted improved to match your TV s display capabilities This up converting can sometimes cause irregularities in the image If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal I change input source the volume changes The TV remembers the volume level on each input source If the volume level on the new input source is higher or lower than the level on the source you switch from the difference may be noticable Use the Volume Up Down buttons on the remote to adjust the volume I change input source the display image changes size The TV remembers the viewing mode on each input source If the viewing mode on the new input source differs from the one on the input source you switch from the difference may be noticable See Changing the Screen Aspect Ratio on page 24 Screen Size Viewable Area Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Pixel Pitch Dynamic Contrast Ratio Response Time Br
43. spanol Nous parlons Francais 45 The TV displays No Signal Press the INPUT button on the remote control to select a different input source If you are using cable TV satellite or antenna connected directly to the TV scan for channels See Scanning for Channels on page 32 There is no power Ensure the TV is plugged into a working electrical outlet Press the Power Standby button on the remote or on the side of the TV to turn the TV on The power is on but there is no image on the screen Ensure all cables are securely attached to the TV Ensure all devices are connected correctly Devices differ see your device s user manual for details Adjust Brightness Contrast or Backlight Press the INPUT button on the remote to select a different input source 46 There is no sound Press Volume Up on the remote control Press the MUTE button on the remote to ensure mute is off Check the audio settings See Adjusting the Audio Settings on page 29 Ensure the speakers are set to On Check the audio connections of external devices Blu ray player game console cable satellite box that are connected to the TV If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The colors on the TV don t look right Adjust the Color and Ti
44. t on on the remote If you are using a device that is connected to the RF input such as an external antenna or cable TV connection you must set the CHANGING THE TV SETTINGS Setting the Tuner Mode Using the settings menu you can Change the input source tuner mode Set up the TV tuner Input Source 1 Press the MENU button on the remote The on screen menu is Name the TV inputs Tuner displayed Turn Game Mode on or off Nemeilnput 2 Use the Arrow buttons on the remote to highlight the Except TV input Setup parental controls Parental Controls Settings icon and press OK The Settings menu is displayed Menu Language English 3 Highlight Tuner and press OK The Tuner Settings menu is Change the on screen displayed menu language Time amp Local Settings CEC Settings 4 Highlight Tuner Mode and use the Left Right Arrow buttons o select Antenna or Cable Set the time Adjust the CEC settings 5 Press the EXIT button on the remote Select input source Scanning for Channels Before the TV can detect and display channels and their associated information you must scan for channels A channel scan may also be necessary when the TV has been moved to an area where different free to air broadcast television channels are available Changing the Input Source To quickly access the input source menu press the Q INPUT button on the remote vizio 1 From the Tuner Settings
45. t devices 1 Verify that your device has a video port that matches an available port on the TV HDMI Component etc 2 Turn the TV and your device off 3 Connect the appropriate cable not included to the TV and the device 4 Turn the TV and your device on Set the TV s input to match the connection you used HDMI Component etc Cable Satellite Box a DVD Blu ray Player Game Console BACK OF TV Connect ta component inputs L Q ur R AV CABLE c8 8 5 BETTER HDMI CABLE BEST Maximum Resolution COMPONENT CABLE ANALOG HD VIDEO 1080i STEREO AUDIO ANALOG VIDEO a amp i STEREO AUDIO DIGITAL HD VIDEO 1080p HD AUDIO 13 CONNECTING A DEVICE E320AR amp E420AR Your TV can be used to display output from most devices 1 Verify that your device has a video port that matches an available port on the TV HDMI Component etc 2 Turn the TV and your device off 3 Connect the appropriate cable not included to the TV and the device 4 Turn the TV and your device on Set the TV s input to match the connection you used HDMI Component etc Cable Satellite Box DVD Blu ray Player Game Console BACK OF TV Connect ta component inputs 6 L Q lt R Maximum Resolution ANALOG VIDEO a amp
46. t is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box Legal amp Compliance FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communica
47. t the Left Right Speaker Balance TV Speakers Turns the built in speakers on or off SRS StudioSound HD Studiosound HD is a feature rich surround sound solution which delivers an immersive surround sound experience from the TV s internal speakers Additionally Studiosound HD completes the entertainment experience by maintaining a steady volume while watching programming and movies providing deep rich bass and delivering crisp details and clear intelligible dialog Select Surround or Standard SRS TruVolume TruVolume intelligently normalizes volume fluctuations due to television commercials or channel changes Select On or Off Advanced Audio See Adjusting the Advanced Audio Settings on page 30 Equalizer Settings Adjust the boost or attenuation of different frequencies Change the equalizer presets by selecting Flat Rock Pop Classical or Jazz To customize the equalizer settings yourself set EQ Mode to Advanced then adjust each frequency or set EQ Mode to Basic then adjust Bass and Treble settings This setting is only available when SRS StudioSound HD is set to Standard Reset Audio Mode Restores the audio settings to the factory defaults See Resetting the Audio Settings on page 31 When you have finished adjusting the audio settings press the EXIT button on the remote 30 Adjusting the Advanced Audio Settings To adjust the advanced audio settings 1 From the Audio Settings
48. the National Electrical Code ANSI NFPSA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Ground Clamp Electric Service Equipment Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Antenna Lead In Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps n n Power Service Grounding Electrode System NEC ART 250 part H ble of Contents Installing the TV e Changing the Input Source sess 24 Inspecting the Package Contents s Changing the Screen Aspect Ratio 24 Installing ANS TV esca niemen renier 3 Setting Up Closed Captioning see 25 Changing the Appearance of Digital Closed Captions 25 Activating the Sleep Timer Installing the TV Stand Installing
49. the TV on a Wall Wall Mount Screw Location ssee ee 5 Setting the Auto Power Off Feature Adjusting the Picture Settings Controls and CORNSONOIS Enr 6 Adjusting the Advanced Picture Settings 27 Rear Panel E240AR nn 6 Adjusting the Color Temperature Adjusting the Picture Size and Position Resetting the Picture Settings eene Adjusting the Audio Settings Adjusting the Advanced Audio Settings Resetting the Audio Settings Changing the TV Settings Connecting Your Devices Changing the Input Source Connecting A Device E240AR 418 Setting the Tuner Mode Connecting A Device E320AR amp EA20AR 4 Scanning for Channels Connecting A Device E500AR 5 Adding New Channels Connecting A PC E240AR 6 Skipping Channe Connecting A PC E320AR amp E420AR sene 7 Changing the Audio Language Connecting A PC E500AR 8 Using the Parental Controls Connecting an Audio Device E240AR Accessing the Parental Controls Menu Connecting an Audio Device E320AR amp E420AR 20 Enabling or Disabling Program Ratings Connecting an Audio Device E500AR ssssss 21 Locking and Unlocking Channels Blocking and Unblocking Content by Ratin Changing the Parental Control Passcode Resetting the Content Locks Changing the Names of the Inputs Rear Panel E320AR amp E420AR Rear Panel E5
50. tions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC warning Changes or modifications not expressly approved by the party res
51. tly displayed input Turn TV on ar off A N CONTROLS INFO Control USB photo viewer Display the info window CLOSED CAPTIONS MENU Open the closed caption menu Display the on screen menu EXIT ARROW Close the on screen menu Navigate the on screen menu 6 OK GUIDE Select the highlighted menu option Display the info window K BACK V BUTTON Go to the previous on screen menu Open the USB photo viewer VOLUME UP DOWN CHANNEL UP DOWN Increase or decrease loudness of the audio Change the channel MUTE LET Turn the BUdIG E ON Return to the channel last viewed NUMBER PAD DASH Manually enter a channel WIDE Switch the display mode wine Use with number pad to manually enter a digital sub channel For example 18 4 or 18 5 Remote Control Ti Replacing the Batteries 1 Remove the battery cover 2 Insert two batteries into the remote control Make sure that the and symbols on the batteries match the and symbols inside the battery compartment 3 Replace the battery cover S Use only good quality batteries Q Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury Dispose of old or dead batteries in accordance with local hazardous waste regulations Keep batteries away from children and pets 12 Replacing the Batteries CONNECTING A DEVICE E240AR Your TV can be used to display output from mos
52. trol or injure the operator Do not expose batteries to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way The performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges Article 810 of
53. tup Wizard The TV s Setup App can be used to easily set up the TV tuner To start Setup Wizard 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed 3 Highlight Start Setup Wizard and press OK 4 Enter your parental control passcode If you have not yet set up a parental passcode enter the default 0000 The TV displays Are you sure you want to RESET SETUP WIZARD 5 Highlight Yes and press OK The Setup App will begin USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote Press the INFO or GUIDE button one time to display channel and input information Press the INFO or GUIDE button two times to display the program title and closed captioning information Press the INFO or GUIDE button three times to display the program description Program Title CC Information Channel Information Time Warp Mouse Trap Ch 50 123 KCAL DTV CABLE 11 00 AM 12 00 AM TV PG V CC OFF ENGLISH DOLBY D 5 1 720p HD in tnis nour iong special the rime vvarp team runs OTT to join tne circus wiin trap tesung Rev Tommy Gunn and with high flying Cirque du Soleil explore their inner stuntmen Land put evervthina but wood in a chipper Program Description Info Window E 41 USING THE USB PHOTO SLIDESHOW The USB port on your TV allo
54. ure settings Adjust the audio settings Change TV settings Access USB photo slideshow Access the help menu VIZIO Input e Picture Audio h Settings Media Help Menu to adjust TV Picture Controls 23 NAVIGATING THE ON SCREEN MENU To open the on screen menu press the MENU button on the remote Use the Arrow buttons to highlight a menu option and press the OK button to select that option While navigating the on screen menu you can press Q the BACK button at any time to return to the previous menu screen The EXIT button will close the on screen menu CHANGING THE INPUT SOURCE External devices such as DVD players Blu Ray Players and video game consoles can be connected to your TV To use one of these devices with yourTV you must first change the input source in the on screen menu To change the input device vizio 1 Press the MENU button on the 7 remote The on screen menu is displayed input Source Selection TV AV 2 Use the Arrow buttons on the remote to highlight the Input icon and press OK The Input Source Selection menu is displayed Component RGB HDMI 3 Use the Up Down Arrow buttons on the remote to highlight the input source and press OK Watch TV from your Antenna or Cable Out of the wall 24 CHANGING THE SCREEN ASPECT RATIO The TV can display images in five different modes Wide Zoom Normal Panoramic and Stretch Each mode displays the picture
55. ws you to connect a USB thumb drive and view a photo slideshow PC AUDIO Q RGB PC Homi 42 Connecting a USB Thumb Drive to the TV 1 Turn the TV off Connect your USB thumb drive to the USB port on the back of the TV 2 Press the Power Standby button on the remote or touch the Power control on the side of the TV to turn it on 3 The TV displays USB media detected Browse content Highlight Yes and press OK to play USB media Do not remove the USB thumb drive while the TV is on Doing so may damage the drive Playing USB Media To play USB media you must first save your images onto a USB thumb drive Remember The USB thumb drive must be formatted as FAT32 Files on the USB thumb drive must end in a supported file extension jpg The player is not designed to play media from external hard drives or mp3 players To play your USB media 1 Connect your USB thumb drive to the USB port on the back of the TV 2 Press the V Button on the remote 3 Highlight USB1 MyFlashDrive and press OK 4 Highlight the type of media you wish to display Photo Press OK 5 Use the Arrow buttons to highlight the file you want to display Press OK The Modify Photo menu is displayed 6 Highlight Start Slideshow and press OK to start slideshow photo press OK then highlight Fullscreen and press Q You can display your photos in fullscreen Select the OK 43 F
Download Pdf Manuals
Related Search