Denver TRC-1480 weather station
Contents
1. After your weather station is powered up it will take around 24 hours to stabilize The weather icons on the display give reference to the next 6 12 hours weather conditions It may not match with the current weather condition outside TROUBLESHOOTING 1 Incase your indoor unit shows irrelevant information or digits it may be affected by electrostatic discharge or interferences from other devices Press RESET on the rear of the unit Your unit will be reset to the factory settings time and calendar and you need to set time and calendar again 2 In case the outdoor temperature shows 2 1 Press CHANNEL ALM On Off to display the correct channel CH1 is your default channel 2 2 If the outdoor temperature shows CH1 press and hold CHANNEL ALM ON OFF for 2 seconds The outdoor temperature will be displayed in approx 1 minute 2 3 If above procedures do not work repeat 2 2 bring in the outdoor sensor and press RESET on the outdoor sensor Please note If you observe a Low Battery icon on the lower left side of the LCD which means your outdoor sensor has a low battery level replace the batteries of the sensor CARE AND MAINTENANCE 1 Do not expose the unit to extreme temperatures water or direct sunlight 2 Avoid contact with corrosive materials 3 Do not subject the unit to excessive force dust or humidity 4 Donot open the casing or tamper with components of the unit SPECIFICATIONS2. as printed inside the battery compartment Replace the battery cover After a few seconds the LCD shows default time calendar and current indoor temperature and starts to search for the outdoor temperature signal 3 Insert 2 x AAA batteries in the outdoor sensor The outdoor temperature will be displayed with CH1 shown on the lower line of the LCD Your indoor unit is synchronized with the outdoor sensor on Channel 1 the outdoor temperature is displayed Please note Your outdoor sensor has a transmission range of 30m with no obstructions The actual transmission ranna ran vary Aanandinn nn tha cinnal nath Ahetriictinne ranf walle flanre railinne traac atr format or 24 time format When selecting 12 Hr the PM icon will be displayed 5 Press SET ALM SET again the time digits change to 00 press to select your time zone 6 Press SET ALM SET again the time digits 0 00 show and the hour digits start flashing Press to set the hours 7 Press SET ALM SET again the minute digits start flashing Press button to set the minutes 8 Press SET ALM SET to return to normal mode or wait 30 seconds for the unit to return automatically SET ALARM Press SET ALM SET the time digits change to the alarm time digits AM 7 00 AL Press and hold SET ALM SET for 2 seconds the hour digits start flashing Press to set your desired alarm time hour Press
3. Indoor Temperature Range 10 C to 50 C 14 2 to 122 F Outdoor Temperature Range 50 to 70 C 58 F to 158 F Out of Range Display Temperature HH H LL L Outdoor Temperature Interval 1 minute Temperature Resolution 0 1 C Alarm Duration 2 minutes Transmission Frequency 433Mhz Transmission Distance Up to 30 meters no obstructions Clanatrin and alaatranin aniiinmant and inaliiadadn hattarine nnntaine matarinla Anmnannanto andr ALL RIGHTS RESERVED COPYRIGHT DENVER ELECTRONICS A S WWW DENVER ELECTRONICS COM
4. INSTRUCTION MANUAL TRC 1480 Wireless Indoor and Outdoor Thermometer Clock and Weather Station PM INDICATOR TIME DATE MONTH MAXIMUM MINIMUM ICONS LOW BATTERY OF OUTDOOR SENSOR INDOOR TEMPERATURE SET ALARM FRONT VIEW BACK VIEW MAX MIN RESET SIDE VIEW ALARM ON WEATHER FORECAST ICONS RF SENSOR CHANNEL WIRELESS TRANSMISSION ICON OUTDOOR TEMPERATURE CHANNEL ALARM ON OFF SNOOZE FOLDING STAND INSERT 2 x AAA BATTERIES LED RESET N N RF 433MH RF 433MHz CHANNEL 1 CHANNEL 2 Hees INSERT 2 x AAA BATTERIES RAR 15 4 LR03 Do not mix new and old bo REAR VIEW MIN RESET sd 9 7 a ny 2 sd f Cd Ys INSERT 2 X AAA BATTERIES Pet SS ss SIDE _ FOLDING STAND eas sd Cd a ifs o l b o Cd L y OUTDOOR TEMPERATURE SENSOR STAND __ _ ____ O QUICK START GUIDE 1 Slide the battery cover at the rear of your indoor unit open 2 Insert 2 x AAA batteries in the battery compartment observe correct polarity
5. SET ALM SET again the alarm minute digits start flashing Press to set the alarm minutes Press SET ALM SET again time digits change to 05 and start flashing Press to set the snooze duration between 1 and 20 minutes Press SET ALM SET to return to normal mode or wait 30 seconds for the unit to return automatically TURN ALARM ON OR OFF Press SET ALM SET to display the alarm time When the alarm time is displayed press to turn on off the daily alarm When the alarm function is turned on the amp icon appears between the hour and minute digits SNOOZE FUNCTION When your alarm turns on the clock sounds beep to wake you up The amp icon starts flashing 1 Press SNOOZE to stop the alarm temporarily the icon keeps flashing The alarm will beep again after 5 minutes maximum values the unit will start recording and displaying updated data again When minimum indoor outdoor temperature and humidity are displayed press and hold MIN to clear the minimum values the unit will start recording and displaying updated data again USE INSTRUCTIONS FOR THE WEATHER STATION There are four types of weather display on your weather station SUNNY AND CLOUDY 5 CLOUDY CC Vas RAINY COCO 5 0 Please note For better use of your weather station place it in a location with air circulation e g close to an open window Placing it in an air conditioned environment will affect its accuracy
Download Pdf Manuals
Related Search