Home

Samsung T22A350

1. amp DIGITAL AUDIO OUT OPTICAL DIGITAL AUDIO OUT OPTICAL w DAH Ddigital audio system a O ES a J C0 When a Digital Audio System is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theatre Q Headphones 6 You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately English 19 Connections Connecting to a PC Using an HDMI cable or an HDMI to DVI cable or a D su
2. Caution a va SN o J fo Ka PLS A If the height of on one side is Avoid lifting the product holding only different from the other side unfasten the stand the screws adjust the heights and re assemble The cleaning cloth is supplied with black high glossy models only amp The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance English 1 2 Getting Started The product colour and shape may vary depending on the model Control Panel SAMSUNG Power Indicator Blinks and turns off when the power is on and lights up in standby mode Remote control sensor Aim the remote control towards this spot on the TV SOURCE G Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features Adjusts the volume In the OSD use the sag buttons as you would use the lt and B buttons on the remote control V CHA Changes the channels In the OSD use the W CH A buttons as you would use the V and A buttons on the remote control Power Turns the TV on or off Speakers Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of
3. or Weak Signal No Signal appears If you are using a CAM CARD CI Cl check that it is installed into the common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again You turned the TV off 45 minutes ago and it turned on again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture SO This panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product skrhk Storage and Maintenance QV it you attched some stickers on the TV screen it remains some debris after removing the sticker Please clean it to watch TV Do not spray water or a cleaning agent directly onto the product Any liquid that goes into the product may cause a failure fire or electric shock Clean the product with a soft cloth dapped in a small amount of water English 5 1 Other Information D Licence SISO TheaterSound SRS and the symbol a
4. 30 8 XviD 1920x1080 6 30 8 avi AVI MP3 AC3 LPCM Hara MKV H 264 BP MP HP 1920x1080 6 30 25 ADPOMI DIS Gore MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 640x480 6 30 8 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 XviD 1920x1080 6 30 8 n MP3 AC3 LPCM cast ASF H 264 BP MP HP 1920x1080 6 30 25 ABO NG MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 640x480 6 30 8 wmv ASF Window Media Video v9 1920x1080 6 30 25 WMA H 264 BP MP HP 1920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 1920x1080 6 30 8 MP3 ADPCM AAC XVID 1920x1080 6 30 8 H 264 BP MP HP 1920x1080 6 30 25 3gp 3GPP ADPCM AAC HE AAC MPEG4 SP ASP 1920x1080 6 30 8 VRO MPEG1 1920x1080 24 25 30 30 ro AC3 MPEG LPCM VOB MPEG2 1920x1080 24 25 30 30 MPEG1 1920x1080 24 25 30 30 es PS MPEG2 1920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 1920x1080 6 30 25 ve MPEG2 1920x1080 24 25 30 30 AC3 AAC MP3 DD ip TS H 264 1920x1080 6 30 25 HAG mp vet 1920x1080 6 30 25 Other Restrictions Bw NOTE e If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly e Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above Ifthe Index Table is in error the Seek Jum
5. Other Information KO If you install the device driver you can set up the appropriate resolution and frequency for the product The device driver is included on the CD supplied with the product If the supplied drive file is corrupted please visit the Samsung Electronics website www samsung com and download the driver Insert the driver installation CD into the CD ROM drive Click on Windows Driver Complete the remaining installation steps according to the instructions displayed on the screen Select the model of your product from the model list PO NE i SAMSUNG monitor installer Select the display adapter on which you want to intall the monitor 1 NVIDIA GeForce 8600 GTS Select the monitor which you want to install SyncMaster SyncMaster CANCEL 5 Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings For more information refer to the document about the Windows operating system English 45 Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control 0 a Teletext on mix off N 8 page up Displays the next Activates the Telete
6. Picture Menu Sound Menu System Menu Support Menu Using the My Downloads Anynet HDMI CEC HSITSNA Installing the Device Driver Analogue Channel Teletext Feature Attaching a Wall Mount Desktop Stand Assembling the Cables Anti theft Kensington Lock Troubleshooting Specifications Index Check the Symbol D This function can be used by pressing the TOOLS button on the remote control Step by Step Guide English 3 Getting Started Icons used for safety precautions Failing to follow the precautions marked with this sign may result in a serious injury or AN WARNING even a fatality Failing to follow the precautions marked with this sign may result in a personal injury or A CAUTION property damage Do not perform Must be folowed This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE This symbol alerts you that important literature COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL AN concerning operation and maintenance has been included with this product Power Related The following images are for your reference and may differ depending on models and countries A Warning Avoid using a damaged power Avoid co
7. e The TV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products e For the method of connecting external devices refer to the supported user manual To connect to Home Theatre Di Anynet Anynet ON Device 1 Home Theatre Device 2 HDMI OUT HDMI OUT f Digital Audio Input HDMI IN HDMI OUT o 1 DVI ta HDMI Cable HDMI Cable HDMI Cable DIGITAL AUDIO OUT RP maana a OPTICAL Optical Cable oj 1 Connect the HDMI IN 1 DVI 2 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable amp NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home
8. Preferred automatically activates even if the Hearing Impaired mode is selected SI English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable UK only If the programme broadcasts with digital text this feature is enabled Auto Protection Time Em Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen General Em Max Power Saving Off On Turn off PC monitor when PC is not used for certain length of time to reduce power consumption amp Q Available only PC mode E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting game mode LO NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available when the input source is set to TV or PC e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie E Menu Transparency Bright Dark Set the Transp
9. When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product When cleaning the product disconnect the power cord and clean the product with the supplied cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquitorepellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use the supplied cleansing cloth A Warning P Since a high voltage runs through gt the product never disassemble repair or modify the product gb yourself a e Otherwise it may result in fire or electric shock e f the product needs to be fixed contact a service centre To move the product turn the power off and unplug the power cord the antenna cable and any other wires connected to the product e Otherwise it may result in electric shock or fire due to the damaged power cord English 7 Getting Started If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service centre e Otherwise it may result in electric shock or fire If you drop the product or the case is damaged turn the powe
10. C button Select the appropriate country amp After selecting the country in the Country menu some models may proceed with an additional option to setup the pin number When you input the PIN number 0 0 0 0 is not available Setting the Set the Clock Mode automatically or manually Clock Mode Selecting an antenna Press the A or V button then press the ENTER C button Select the Antenna source to memorise Selecting a channel Press the A or V button then press the ENTER C button Select the channel source to memorise When setting the antenna source to Cable a step appears allowing you to assign numerical values channel frequencies to the channels For more information refer to Channel Auto Tuning p 24 7 Enjoy your TV Press the ENTER C button O OB If You Want to Reset This Feature Select System Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 France 1 1 1 1 If you want to change the PIN number use the Change PIN function You should do Plug amp Play MENU System again at home although you did in shop W If you forget the PIN code press the remote control buttons in the following sequence in Standby mode which resets the PIN to 0 0 0 0 France 1 1 1 1 POWER off MUTE gt 8 gt 2 gt 4 gt POWER on English 15 Connections Connecting to an AV Device Using an HDMI or an HDMI to DVI cable up to 108
11. Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button O it you disconnect the power cord you have to set the clock again Clock Mode Auto Manual e Auto Set the current time automatically using the time from a digital channel The antenna must be connected in order to set the time automatically e Manual Set the current time manually amp Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually English 30 Basic Features Clock Set Set the Day Month Year Hour and Minute manually amp Available only when Clock Mode is set to Manual amp You can set the Day Month Year Hour and Minute directly by pressing the number buttons on the remote control Time Zone Auto Manual Set the time zone to GMT amp Q This function is only available when the Clock Mode is set to Auto GMT GMT 3 00 GMT 1 00 GMT GMT 1 00 GMT 12 00 Selects your time zone amp Q This function is only available when the Time Zone is set to Manual DST Daylight Saving Time Off On Switches the Daylight Saving Time function on or off This function is only available when the Time Zone is set to Manual Using the Sleep Timer E Sleep Timer JA Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp Q To cancel
12. Medium High Picture Off aA This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal Disabled when the PC is in power saving mode Auto Power Off Off On Saves power by turning TV off automatically when no user operation is received for 4 hours English 3 2 Basic Features D Other Features MENU II System gt ENTERC Language m Menu Language Set the menu language m Teletext Language Set a desired language for teletext SI English is the default in cases where the selected language is unavailable in the broadcast E Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected Subtitle Use this menu to set the Subtitle mode EB Subtitle Off On Switches subtitles on or off E Subtitle Mode Normal Hearing Impaired Sets the subtitle mode H Subtitle Language Sets the subtitle language O If the programme you are watching does not support the Hearing Impaired function
13. Sleep Timer select Off Setting the On Off Timer E On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can be made You must set the clock first Setup Sun Mon Tue Wed Thu Fri Sat gt o Naa On Time Volume a kA TV ATV 1 Adjust lt gt Move Enter DS Return Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The w mark indicates the day is selected On Time Set the hour and minute Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp NOTE f there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly e When there is only one photo file in the USB the Slide Show will not play e If a folder name is too long the folder cannot be selected Each USB you use is assigned its own folder When using more than one of the same
14. Theatre not the TV You can connect only one Home Theatre You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 10 AV devices in total Note that you can connect up to 3 devices of the same type English 4 1 Advanced Features Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list Recording recorder Starts recording immediately using the recorder This is only available for devices that support the recording function device name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device_name Tools Shows the tools menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear SI Depending on the device this menu may not be available device name Title Menu Shows the title menu of the connected device E g If a DVD recorder is connected the title menu of the DVD recorder will appear amp Depending on the device this menu may not be available Stop Recording recorder Stops recording Receiver Sound is played through
15. depending on country e Watch Watches the channel you select gt Page Move to next or previous page How to use Timer Viewing in Channel List digital channels only When you set the Timer Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desired digital channel 2 Press the A Programme View button 3 Press the a w buttons to select the desired programme then press the C Information button 4 Select Timer Viewing then press the ENTER C button when done KO tf you want to cancel Timer Viewing follow steps 1 through 3 Select Cancel Schedules D Using the Channel CONTENT Watch TV gt Channel Manager ENTER C Channel Manager Edit the favourite channel and set the channels to Delete Deselect All or Select All You can edit the channel name only for analogue channels 1 1 page gt ABC Alice TV YTN CBC ABS BBC ONE BBC ONE BBC THREE CBBC Channel BBCi a BBCi SNT SNT Antenna Sorting Page C4 Select JI Tools 5 Return e The displayed image may differ depending on the model e C3 Channels Select a channel in the All TV Radio Data Other Analogue and Favourites 1 5 screen Change the antenna or channel settings using the menus in the top right corner of the screen e Kk Favourites 1 5 Shows favourite channels SI Using the colour buttons with the Channel Manager A Red
16. electric power is still consumed even when the power button is turned off It is best to unplug the power cord English 13 Getting Started Viewing the Remote Control This is a special remote control for the visually impaired persons and has Braille points on the Power Channel and Volume buttons Turns the TV on and off Selects the HDMI mode directly Have direct access to channels Alternately select Teletext ON Double Mix or OFF Adjusts the volume Displays the main on screen menu Displays the Content Home which includes Watch TV p 22 My Downloads p 36 and Source p 21 Quickly select frequently used functions Move the cursor and select an item Confirm the setting Returns to the previous menu These buttons are for the Channel List Channel Manager My Downloads menu etc Use these buttons in My Downloads and Anynet HDMI CEC modes p 36 41 Installing batteries Battery size AAA Displays and selects the available video sources Returns to the previous channel Cuts off the sound temporarily Changes channels Displays channel lists on the screen p 23 Displays the EPG Electronic Programme Guide p 22 Displays information on the TV screen Exits the menu P MODE Press to select the Picture Mode p 25 SRS Selects SRS TruSurround HD mode p 29 DUAL I I Sound effect selection p 30 E MANUAL Not Available P SI
17. system when using it in a public place The appearance and locking method aag may differ from the illustration depending on the manufacturer Refer to the manual iad A a A provided with the Kensington Lock for additional information on proper use SIN Rear gt Mg 7 0 amp Please find a R icon on the rear of the TV A kensington slot is beside the fal Va 4 icon R mag g H To lock the product follow these steps KY a 1 Wrap the Kensington lock cable around a large stationary object such as desk 23 nen or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock lt Optional gt SO These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model English 48 Other Information Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Solutions and Explanations PC Connection A Mode Not Supported message appears PC is always shown on the source list even if a
18. the Cl or Cl CARD To watch paid channels the Cl or Cl CARD must be inserted NOTE If you don t insert the Cl or Cl CARD some channels will display the message Scrambled Signal The pairing information containing a telephone number the Cl or CI CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it Insert the Cl or Cl CARD in the direction marked on the card e The location of the COMMON INTERFACE slot may be different depending on the model Cl or Cl CARD is not supported in some countries and regions check with your authorized dealer e If you have any problems please contact a service provider Insert the Cl or Cl CARD that supports the current antenna settings The screen will be distorted or will not be seen English 18 Connections Connecting to an Audio Device Using an Optical Digital or a Headphone Connection Available devices digital audio system amplifier DVD home theatre PC
19. the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device name fl Setting Up Anynet MENU II System Anynet HDMI CEC gt ENTER Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off amp If Auto Tum Off is set to Yes running external devices will turn off at the same time as the TV powers off However a device may not turn off if recording is in progress amp May not be enabled depending on the device Switching between Anynet Devices Press the TOOLS button to select Anynet HDMI CEC And then press the ENTER 4 button to select Device List O If you cannot find a device you want press the EY button to refresh the list Select a device and press the ENTER C button You can switch to the selected device The Device List menu will only appear when you set Anynet HDMI CEC to On in the System menu Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet f
20. type of USB make sure the folders assigned to each USB have different names It is recommended that you use a USB memory stick and a multi card reader when using On Timer The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized English 3 1 Basic Features E Off Timer 1 Off Timer 2 Off Timer 3 Three different off timer settings can be made You must set the clock first Off Timer 1 4 gt Move Adjust Enter 9 Return Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected Off Time Set the hour and minute Cl Locking Programmes MENU I System Security gt ENTER C Security Q The PIN input screen appears before the setup screen I Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Channel Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme D Available only when the input Source is set to TV E Program Rating Lock depending on the country Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 dig
21. 0 4 4 oa 1280 x 1024 60Hz 63 981 60 020 108 000 a 1280 x 1024 75Hz 79 976 75 025 135 000 a VESADMI 440 x 900 60Hz 55 935 59 887 106 500 440 x 900 75Hz 70 635 74 984 136 750 19 22 23 24 27 360 x 768 60Hz 47 712 60 015 85 500 KATAGA 1680 x 1050 60Hz 65 290 59 954 146 250 SAI RS PRAN 1920 x 1080 60Hz 67 500 60 000 148 500 NOTE e For PC connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported English 20 Connections Source SOURCE Source Use to select TV or an external input sources such as a DVD Blu ray player cable box STB satellite receiver E TV Ext PC HDMI1 DVI HDMI2 AV Component USB H SOURCE E J amp In the Source connected inputs will be highlighted amp TV Ext and PC always stay activated Basic Features Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions ENTER C Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu MENU button Displays the main on screen menu EXIT button Exits the on screen menu ooo Edit Name SOURCE TOOLS Edit Name gt ENTER C In the Source press the T
22. 0 801 1SAMSUNG 172678 022 607 93 33 www samsung com PORTUGAL 80820 SAMSUNG 726 7864 www samsung com RUMANIA 08010 SAMSUNG 08010 7267864 doar din reteaua www samsung com Romtelecom tarif local 021 206 01 10 din orice retea tarif normal SERBIA 0700 SAMSUNG 0700 726 7864 www samsung com SLOVAKIA 0800 SAMSUNG 0800 726 786 www samsung com sk SPAIN 902 1 SAMSUNG 902 172 678 www samsung com SWEDEN 0771 726 7864 SAMSUNG www samsung com SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 min http www samsung com ch http www samsung com ch fr French U K 0330 SAMSUNG 7267864 www samsung com EIRE 0818 717100 www samsung com LITHUANIA 8 800 77777 www samsung com LATVIA 8000 7267 www samsung com ESTONIA 800 7267 www samsung com TURKEY 44477 11 www samsung com RUSSIA 8 800 555 55 55 www samsung com GEORGIA 8 800 555 555 ARMENIA 0 800 05 555 AZERBAIJAN 088 55 55 555 KAZAKHSTAN 8 10 800 500 55 500 GSM 7799 www samsung com UZBEKISTAN 8 10 800 500 55 500 www samsung com KYRGYZSTAN 00 800 500 55 500 www samsung com TADJIKISTAN 8 10 800 500 55 500 www samsung com UKRAINE 0 800 502 000 www samsung com ua www samsung com ua ru BELARUS 810 800 500 55 500 MOLDOVA 00 800 500 55 500 2011 Samsung Electronics Co Ltd All rights reserved BN46 00077A
23. 0p Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver VCR C NGIN Pa c T mm u ray player Dl ETTA DVI OUT i C in omo DVD AUDIO OUT Blu ray player O 3 w MG E Red White amp HDMI IN 1 DVI 2 PC DVI AUDIO IN For better picture and audio quality connect to a digital device using an HDMI cable e An HDMI cable supports digital video and audio signals and does not require an audio cable To connect the TV to a digital device that does not support HDMI output use an HDMI DVI and audio cables e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur e A basic high speed HDMI cable or one with ethernet is recommended This product does not support the ethernet function via HDMI English 16 Connections Using a Component up to 1080p or an Audio Video 480i only and a Scart Cable Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite recei
24. 2 Without Stand 454 7 x 287 7 x 487 8 x 306 5 x 523 9 x 327 7 x 555 7 x 345 6 x 578 6 x 359 1 x Dimensions 35 4 mm 35 6 mm 35 7 mm 31 6 mm 33 2 mm WxHxD With Stand 454 7 x 368 5 x 487 8 x 387 3 x 523 9 x 413 5 x 555 7 x 431 9 x 578 6 x 444 6 x 214 2 mm 214 2 mm 239 1 mm 239 2 mm 239 2 mm Without Stand 3 1 kg 2 8 kg 3 6 kg 3 6 kg 4 2 kg Weight With Stand 3 4 kg 3 1 kg 4 2 kg 4 2 kg 4 8 kg Model Name T22A550 T23A550 T24A550 T27A550 Screen Size Diagonal 21 5 inches 54 cm 23 inches 58 cm 24 inches 61 cm 27 inches 68 cm Display Resolution 1920 x 1080 60Hz Sound Output 3W x2 5W x2 MEERE Without Stand 525 5 x 329 0 x 34 8 mm 559 1 x 348 7 x 31 2 mm 581 4 x 360 5 x 32 7 mm 648 1 x 398 9 x 31 8 mm il WxHxD 525 5 x 414 4 x 220 6 559 1 x 433 8 x 220 6 581 4 x 446 1 x 220 6 648 1 x 485 7 x 235 0 With Stand mm mm mm mm Without Stand 3 6 kg 3 7 kg 4 3 kg 4 7 kg Weight With Stand 4 4 kg 4 4 kg 5 kg 5 6 kg NOTE Design and specifications are subject to change without prior notice e For information about power supply and more about power consumption refer to the label attached to the product Some models may not be available for purchase depending on the region e If there is no power cut off switch the power consumption is O only when the power cord is disconnected e DPM Display Power Management Function does not work if you used in conjunction with the HDMI IN 1 DVI port of this product Engli
25. 5 Videos 37 Energy Saving 32 Power Indicator 13 Volume 31 EPG Electronic Programme Guide 22 Power Related 4 Equalizer 29 W External Speaker 30 Wall Mount 47 Watch TV 22 WEEE 52 English 54 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre T Web Site ALBANIA 42 27 5755 AUSTRIA 0810 SAMSUNG 7267864 0 07 min www samsung com BELGIUM 02 201 24 18 www samsung com be Dutch www samsung com be fr French BOSNIA 05 133 1999 BULGARIA 07001 33 11 www samsung com CROATIA 062 SAMSUNG 062 726 7864 www samsung com CZECH 800 SAMSUNG 800 726786 www samsung com Samsung Zrt esk organiza n slo ka Oasis Florenc Sokolovska394 17 180 00 Praha 8 DENMARK 70 70 19 70 www samsung com FINLAND 030 6227 515 www samsung com FRANCE 01 48 63 00 00 www samsung com GERMANY 01805 SAMSUNG 726 7864 0 14 Min www samsung com GREECE 2106293100 www samsung com HUNGARY 06 80 SAMSUNG 726 7864 www samsung com ITALIA 800 SAMSUNG 726 7864 www samsung com KOSOVO 381 0113216899 LUXEMBURG 261 03 710 www samsung com MACEDONIA 023 207 777 MONTENEGRO 020 405 888 NETHERLANDS 0900 SAMSUNG 0900 7267864 0 10 Min www samsung com NORWAY 815 56 480 www samsung com POLAND
26. Antenna Switches to Air or Cable D Blue Sorting Change the list ordered by channel name or channel number English 23 Basic Features Channel Status Display Icons Channel Menu i Retuning Channels Icons Operations a An analogue channel NM A channel selected A channel set as a Favourite a A locked channel Channel Manager Option Menua Set each channel using the Channel Manager menu options Watch Add to Favourites Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Deselect All Select All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings e Watch Watch the selected channel e Add to Favourites Edit Favourites TIE Set channels you watch frequently as favourites 1 Select the Add to Favourites Edit Favourites then press the ENTER C button La If the channel is already added to favourite channel Edit Favourites will be shown 2 Press the ENTER 4 button to select Favourites 1 5 then press the OK button amp One favourite channel can be added in several of Favourites among Favourites 1 5 e Lock Unlock TIED Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set to On The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Ch
27. I cable Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box PD e The correct size setting resolution Optimum 19 1360 X 768 pixels 20 1600 X 900 pixels 22 27 1920 X 1080 pixels e Ifa vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product e Straighten your back e Keep a distance of 45 50 cm 15 19 inches from your eyes to the screen Look down at the screen and face the screen forwards e Adjust the angle of the product so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Keep your elbow at a right angle e Place your heels
28. OOLS button and then you can set an external input sources name you want VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier amp When connecting a PC to the HDMI IN 1 DVI port with HDMI cable you should set the TV to PC mode under Edit Name amp When connecting a PC to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI PC mode under Edit Name Q When connecting an AV devices to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI Devices mode under Edit Name Information SOURCE TOOLS Information gt ENTER C You can see detailed information about the selected external device How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appear on the screen Picture Sound Channel System Support Select an icon with the A or V button Press ENTERC to access the sub menu Select the desired submenu with the A or V button Adjust the value of an item with the lt or B button The adjustment in the OSD may differ depending on the selected menu Press ENTER L to complete the configuration Press EXIT 1 MENU MM A V ENTER C A V lt gt ENTER C EXIT NO O A DN English 2 1 B
29. PC is not connected Set your PC s output resolution and frequency so they match the resolutions supported by the TV p 20 This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio If you are using a HDMI connection check the audio output setting on your PC Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test p 34 If the test image is properly displayed the poor picture may caused by the source or signal The TV image does not look as good as it did in the store If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto programme amp Many HD channels are up scaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macro block error small block dots pixelization Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and act
30. R button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the System menu p 31 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal There is no picture Video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connect to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection The TV is not receiving all channels The picture is distorted macro block error small block dots pixelization Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored p 15 Verify the Antenna is positioned correctly Compression of video contents may cause
31. SyncMaster imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register ene Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Digital TV notice 1 Functionalities related to Digital TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T or DVB C signal 2 DVB T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast transmission of digital TV over cable 3 Although this TV set meets the latest DVB T and DVB C standards as of August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed 4 Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business 5 Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly w
32. Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test p 34 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume Please check the volume the of external device connected to your TV The picture is good but there is no sound Set the Speaker Select option to TV Speaker in the sound menu p 30 f you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV f you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV f you are using a DVI to HDMI cable a separate audio cable is required f your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion English 49 Other Information Issues Solutions and Explanations No Picture No Video The TV won t turn on The TV turns off automatically Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWE
33. ZE Selects the Picture Size p 26 AD SUBT Turns the audio description on and off not available in some locations p 29 Displays digital subtitles p 33 English 14 Connections Connecting to an Antenna When the TV is initially powered on basic settings proceed automatically O Preset Connecting the mains and antenna O N Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input Source is set to TV Before turning on the TV make sure the antenna cable is connected amp To return to the previous step press the Red button 1 Selecting a language Press the A or V button then press the ENTER C button POWER Select the desired OSD On Screen Display language 2 Selecting Store Demo Press the lt or B button then press the ENTER C button or Home Use e Select the Home Use mode Store Demo Mode is for retail environments e To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume OSD press and hold MENU for 5 sec e Store Demo is only for shop display If you select it several functions are not able to use Please select Home Use when you watch at home 3 Selecting a country Press the Aa or button then press the ENTER
34. and from the TV and reassemble it There are difficulties assembling the stand base Make sure the TV is placed on a flat surface If you can not remove the screws from the TV use a magnetized screw driver English 50 Other Information Issues Solutions and Explanations The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected Your settings are lost after 30 minutes or every time the TV is turned off If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System Plug amp Play Initial setup gt ENTER C p 15 You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source p 34 The message Scramble signal
35. ange the PIN using the Change PIN option e Edit Channel Name analogue channels only Assign your own channel name amp This function may not support depending on the region e Edit Channel Number Edit the number by pressing the number buttons desired QD This function may not support depending on the region e Delete You can delete a channel to display the channels you want e Deselect All Select All Select all the channels or deselect all the selected channels in the channel manager MENU gt Channel gt ENTERC Antenna Air Cable KISI Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV Country The PIN input screen appears Enter your 4 digit PIN number amp Select your country so that the TV can correctly auto tune the broadcasting channels m Digital Channel Change the country for digital channels E Analogue Channel Change the country for analogue channels Auto Tuning Q Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Channel Lock function the PIN input window appears m Auto Tuning hir Cable Select the antenna source to memorise Digital amp Analogue Digital Analogue Select the channel source to memorise Q When selecting Cable Digital amp Analogue or Digital Provide a value to scan for cable cha
36. arency of the menu E Boot Logo Off On Display Samsung logo when the TV is turned on Anynet HDMI CEC Gai For details on set up options refer to the Anynet HDMI CEC instructions DivX Video On Demand Shows the registration code authorized for the TV If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using My Downloads the registration is completed amp For more information on DivX VOD visit http vod divx com English 33 Basic Features Common Interface D D gt Cl Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off Purchase a Cl CAM module at your nearest dealer or by phone Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot Check if you can see a picture on a scrambled signal channel o Picture In Picture PIP MENU II System PIP gt ENTERC PIP You can watch the TV tuner and one external video source simultaneously PIP Picture in Pictu
37. asic Features Using the INFO button Now amp Next The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll 4 gt to view information for a desired programme while watching the current channel e Scroll a w to view information for other channels If you want to move to the currently selected channel press the ENTER C button 18 11 Thu 6 Jan Information Using the Channel Menu Press the CONTENT button to select Watch TV and then select the menu you want to use Each screen will be displayed ee Schedule Manager Channel List Channel Manager Watch TV e The displayed image may differ depending on the model Guide CONTENT Watch TV gt Guide gt ENTER C The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Guide 2 10 Tue 1 Jun wa Channel View All Today 18 00 19 00 27 Discovery 28 DiscoveryH amp L 800 five 24 price drop tv 16 Qvc 6 RADTT 19 00 20 00 American Chopper Programmes resume a
38. at are longer than the standard specifications the inside of the product may be damaged For wall mounts that are not compatible with the standard VESA specifications the length of the screw may differ depending on the corresponding specifications English 47 Other Information e Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force This may result in damage to the product or injury due to the product falling Samsung shall not be held liable for any damage or injury Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer e When installing the product using a wall mount purchase a wall mount that provides at least 10 cm 3 93 inches of space from the wall e Use the wall mount according to the international specifications Assembling the Cables Use the Cable Holder to hide the cables behind the stand amp The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the
39. ay result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or substances enters the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire English 8 Getting Started er Ds A Caution Avoid placing a liquid container such as a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire Displaying a still image for a long time may create a persistent image or stain on the screen e f you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Watching the product from too close a distance continuously may damage your eyesight It
40. b cable DQ Connecting through the HDMI cable may not be supported depending on the PC PC DVI AUDIO IN Display Modes D Sub and an HDMI to DVI Input Optimal resolution 19 1360 X 768 pixels 20 1600 X 900 pixels 22 27 1920 X 1080 pixels ale HDMI OUT TE DVI OUT D EJ CEED a ee AUDIO OUT Horizontal Vertical Pixel Clock Screen Size Mode Resolution Frequency Frequency Frequency rg KHz Hz MHz laki 640 x 350 70Hz 31 469 70 086 25 175 720 x 400 70Hz 31 469 70 087 28 322 MAG 640 x 480 67Hz 35 000 66 667 30 240 832 x 624 75Hz 49 726 74 551 57 284 19 640 x 480 60Hz 31 469 59 940 25 175 20 640 x 480 72Hz 37 861 72 809 31 500 22 640 x 480 75Hz 37 500 75 000 31 500 J 23 800 x 600 56Hz 35 156 56 250 36 000 oe 800 x 600 60Hz 37 879 60 317 40 000 27 VESA DMT 800 x 600 72Hz 48 077 72 188 50 000 800 x 600 75Hz 46 875 75 000 49 500 024 x 768 60Hz 48 363 60 004 65 000 F 024 x 768 70Hz 56 476 70 069 75 000 024 x 768 75Hz 60 023 75 029 78 750 20 600 x 900 60Hz 60 000 60 000 108 000 MAG 152 x 870 75Hz 68 681 75 062 100 000 152 x 864 75Hz 67 500 75 000 108 000 20 280 x 800 60Hz 49 702 59 810 83 500 H al 280 x 960 60Hz 60 000 60 000 108 00
41. djust the screen depth BS Available only in HDMI mode Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in TV AV COMPONENT 480i 10801 and HDMI 480i 10801 English 28 Basic Features Reset Picture OK Cancel Resets your current picture mode to its default settings ti Changing the Preset Sound Mode MENU MI Sound Sound Mode gt ENTERC Sound Mode E Standard Selects the normal sound mode Em Music Emphasizes music over voices Em Movie Provides the best sound for movies m Clear Voice Emphasizes voices over other sounds H Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired KO if Speaker Select is set to External Speaker Sound Mode is disabled J Adjusting Sound Settings Sound Effect MENU I Sound Sound Effect gt ENTERC standard sound mode only O f Speaker Select is set to External Speaker Sound Effect is disabled Em SRS TruSurround HD Off On This function provides a virtual 5 1 channel surround sound experience I through a pair of speakers using HRTF _ Head Related Transfer Function technology Em SRS TruDialog Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearl
42. during CY Enter 4b Page 1 Tools D Return e The displayed image may differ depending on the model 1 Press the a w q button to select the desired photo in the file list 2 Press the ENTER C button When a selected photo is displayed press the ENTER C button to start the slide show During the slide show all files in the file list will be displayed in order When you press the show will be started amp Music files can be automatically played during the Slide gt Play button in the file list slide immediately Normal Image Filename jpg Show if the Background Music is set to On C3 Pause 4 PreviousNext 4 Tools 9 Retum The Background Music cannot be changed until the BGM has finished loading English 39 Advanced Features D My Downloads Additional Functions Videos Music Photos Play Option menu During playing a file press the TOOLS button Category Operations Videos Music Photos Title Search You can move the other file directly Vv Time Search You can search the video using 4 and P button at one minute interval or entering the v number directly Shuffle Mode You can play the music randomly Vv Repeat Mode You can play movie and music files repeatedly Vv Vv Picture Size You can adjust the picture size to your preference Vv Picture Mode You can adjust the picture setting Vv Vv Sound Mode You can adjust the sound se
43. ect Search When scanning has finnished a channel is updated in the channel list H Analogue Channel Tuning Scans for a analogue channel 1 Press the EY button to select New 2 Set the Programme Colour System Sound System Channel and Search 3 Press the w button to select Store When scanning has finnished a channel is updated in the channel list SO Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel Fine Tune analogue channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is Clear SI Settings are applied to the channel you re currently watching amp Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset Transfer Channel List The PIN input screen appears Enter your 4 digit PIN number Imports or exports the c
44. et to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver English 43 Advanced Features i Troubleshooting for Anynet Problem Possible Solution Anynet does not work want to start Anynet Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theatre can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet doesn t work in certain situations Searching channels operating My Downloads or Plug amp Play Initial setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want want t
45. fe Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system English 5 2 Other Information aeralin Temperature 50 F 104 F 10 C 40 C Environmental Fae Humidity 10 80 96 non condensing considerations are Temperature 4 F 113 F 20 C 45 C 9 Humidity 5 95 non condensing Tilt 2 22 Analogue B G D K L Depending on your country selection Don Digital DVB T DVB C s Analogue PAL SECAM NTSC 4 43 NTSC 3 58 PAL60 Colour Voco An Digital MPEG 2 MP ML MPEG 4 H 264 AVC MP L3 MP L4 0 HP L4 0 Sound System BG OK NICAM MPEGI HDMI IN Video 1080 24p 1080p 1080i 720p 576p 576i 480p 480i Audio 2Ch Linear PCM 32 44 1 48kHz 16 20 24bits Model Name T19A350 T20A350 T22A350 T23A350 T24A350 Screen Size Diagonal 18 5 inches 47 cm 20 inches 50 cm 21 5 inches 54 cm 23 inches 68 cm 24 inches 61 cm Display Resolution 1360 x 768 60Hz 1600 x 900 60Hz 1920 x 1080 60Hz Sound Output BW x2 5W x
46. ference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker TV Speaker On External Speaker On tO If there is no video signal both speakers will be mute H Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Reset Sound OK Cancel Reset all sound settings to the factory defaults a Selecting the Sound Mode When you set to Dual II the current sound mode is displayed on the screen Aldo Dual I 11 Default Type po Mono Mono Automatic Stereo Stereo Mono change Stereo Dual Dual I Dual I Dual I Mono Mono Automatic NICAM Stereo Mono Stereo change Stereo M 5 Dual onos ma Dual I Kk Dual I v amp W If the Stereo signal is weak and an automatic switching occurs then switch to the Mono Q Only activated in stereo sound signal Q Only available when the input Source is set to TV System Menu Setting the Time MENU I gt System ENTER C Time H
47. flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart fl Changing the Picture Options Advanced Settings MENU I Picture Advanced Settings ENTER Advanced Settings are available in Standard Movie mode Compared to previous models new Samsung TVs have a more precise picture In PC mode you can only make changes to Gamma and White Balance English 27 Basic Features Advanced Settings Black Tone Off Dynamic Contrast Medium Shadow Detail 1 2 Gamma 0 2 Move C Enter 5 Return Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Dynamic Contrast Off Low Medium High Adjust the screen contrast Shadow Detail 2 2 Increase the brightness of dark images Gamma Adjust the primary colour intensity RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation Colour Space Auto Native Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings F
48. ftware Upgrade Current Version 2011 01 18 000001 By USB By Channel Alternative Softw 2 Move Enter 5 Return Installing the Latest Version By USB Insert TV Side Panel a USB drive containing the TE AA firmware upgrade i file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade USB Drive E By Channel Upgrade the software using the broadcasting signal KO ifthe function is selected during the software transmission period software will be automatically searched and downloaded Dy The time required to download the software is determined by the signal status E Alternative Software backup If there is an issue with the new firmware and it is affecting operation you can change the software to the previous version amp Q If the software was changed existing software is displayed E Standby Mode Upgrade Off 1 hour later 2 hours later 00 00 02 00 12 00 14 00 A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally t
49. hannel map You should connect a USB storage to use this function EB Import from USB Import channel list from USB Em Export to USB Export channel list to USB this function is available when USB is connected fil Changing the Preset Picture Mode MENU II Picture Picture Mode gt ENTER Picture Mode Select your preferred picture type amp When an input source is set to PC the Picture Mode is only available the Standard and Entertain Em Dynamic Suitable for a bright room Em Standard Suitable for a normal environment H Movie Suitable for watching movies in a dark room E Entertain Suitable for watching movies and games amp Available only PC mode English 25 Basic Features D Adjusting Picture Settings MENU II Picture gt ENTERC Samsung MagicAngle This feature allows you to see optimal screen quality according to your viewing position When viewing the screen at an angle from below above or the side of the product by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front E Off Select when viewing from the front position m Lean back mode Select when viewing from a slightly lower position H Standing Mode Select when viewing from the upper position Sy When Samsung MagicAngle is set to Lean back mode or Standing Mode Gamma is not available Backlight Contrast Brightness Sha
50. he screen may be turned on slightly for the LED product This phenomenon may continue for more than 1 hour until the software upgrade is complete Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English 3 5 Advanced Features My Downloads Enjoy photos music and or movie files saved on a USB Mass Storage Class MSC Photos 1 Press the CONTENT button Music 2 Press the amp w 4 gt button to select desired menu Videos Photos Music then press the ENTER C button CONTENT My Downloads gt ENTERC i Connecting a USB Device 1 Turn on your TV y TV Side Panel 2 Connect a USB device containing photo music and or movie files to the USB CN jack on the side of the TV fl _ 3 When USB is connected to the TV popup window appears Then you can select J USSD New device connected Ne O tt might not work properly with unlicenced multimedia files SO Need to Know List before using My Downloads MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e My Downloads only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples
51. icroscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used Avoid installing the product where children may reach it e f a child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Install the antenna far away from any high voltage cables e Ifthe antenna touches or falls onto a high voltage cable it may result in electric shock or fire Do not place the product face down on the floor e This may damage the panel of the product When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury English 6 Getting Started i Cleaning Related A Warning Before cleaning the product unplug the power cord e Otherwise it may result in electric shock or fire AN Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the product or the panel coming off If you can t get the product clean with just the supplied cloth use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related
52. ion movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may cause noise in picture on analogue and digital TV Colour is wrong or missing If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or brightness Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness p 26 Adjust Energy Saving option in the TV menu go to MENU System Eco Solution Energy Saving p 32 Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture p 29 There is a dotted line on the edge of the screen If the picture size is set to Screen Fit change it to 16 9 p 26 Change cable set top box resolution The picture is black and white If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p Sound Quality First of all please perform the Sound
53. is important to give your eyes some rest 5 minutes every hour when viewing the product screen for long periods of time e This will alleviate any eye strain Do not press down hard on the product The product may become deformed or damaged When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product English 9 Getting Started Keep the small accessories in a location out of the reach of children Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Be careful that children do not place the batteries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries Do n
54. is no accessory hidden behind packing materials when you open the box A CAUTION INSERT SECURELY LEST SHOULD BE DETACHED IN SET e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Warranty Card Safety Guide Not available in some locations e Power Cord ee e User Manual e Quick Setup Guide e D sub Cable p e SCART Adapter e Stereo Cable o e Cable Holder e Stand Connector Screws 2ea e Stand Base COMMON INTERFACE 5V ONLY e Cl Card Adapter amp For best cable connection to this product be sure to use cables with a maximum thickness as below me O e Maximum thickness 0 55 inches 14mm English 1 1 Getting Started SO Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards J Check if the Stand Connector is firmly connected Turn the connecting screw at the bottom of the stand fully so that it is completely fixed Insert the Stand Connector into the Stand in the direction shown by the figure ka Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards Push the assembled stand into the main body in the direction of the arrow as shown in the figure Firmly fasten the stand using the screws
55. it PIN code If selected channel is locked the o symbol will be displayed Allow All Unlock All TV ratings Not supported in France and Sweden Si When Program Rating Lock is set to 18 the PIN input screen appears before changing the channels France only amp You can block TV programs by set up rating in Program Rating Lock as the I children T All public SC Unclassified and X X rated When Program Rating Lock is set to X the PIN input screen always before changing the channels Spain only amp You can block TV programs by set up rating in Program Rating Lock as the Children Youth or Adult Sweden only Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them Change your personal ID number required to set up the TV Re enter the same 4 digits When the Confirm screen disappears your PIN has been memorised How to watch a restricted channel If the TV is tuned to a restricted channel the Program Rating Lock will block it The screen will go blank and the following message will appear This channel is blocked by Program Rating Lock Please enter the PIN to unblock O If you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off s MUTE 8 2 4 POWER on il Economical Solutions MENU II System Eco Solution gt ENTERC Eco Solution Energy Saving Off Low
56. ith some cable service providers 6 For more information please contact your local Samsung customer care centre amp The reception quality of TV may be affected due to differences in broadcasting method between the countries Please check the TV performance in the local SAMSUNG Authorized Dealer or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature
57. ives may be released automatically when connected to the TV e Ifa USB extension cable is used the USB device may not be recognized or the files on the device may not be read English 36 Advanced Features e Ifa USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e Ifa file deleted from the PC is still found when My Downloads is run use the Empty the Recycle Bin function on the PC to permanently delete the file My Downloads only supports sequential jpeg format e The scene search and thumbnail functions are not supported in the Videos J Screen Display Move to the desired file using the a w 4 gt buttons and then press the ENTER C or gt Play button The file is played My Downloads screen may differ depending on the way to enter the screen Information Folder View Displays the selected content category Music for example Music_2 device USB drive for example A Nosi folder file name page and sort i Music 3 Music 4 criteria i a File List Section Displays files or folders sorted by criteria you can select Music 5 Music_6 Music_7 in Music 8 singer No sing Music 9 In Music_10 No singer No sir EditMode J Tools Return Contents mode Device name You can select the desired Content Category or Device Operati
58. lesh Tone Emphasize pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries Motion Lighting Off On Reduce power consumption by brightness control Picture Options MENU II Picture Picture Options gt ENTERC O In PC mode you can only make changes to the Colour Tone Picture Options Warm2 Auto Auto Normal Colour Tone Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode Off Move Enter 9 Return Colour Tone Cool Standard Warm1 Warm2 amp amp Warm1 or Warm will be deactivated when the picture mode is Dynamic amp Settings can be adjusted and stored for each external device connected to an input on the TV Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength amp Only available for analogue channels amp When bar is green you are receiving the best possible signal MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality HDMI Black Level Normal Low Selects the black level on the screen to a
59. nnecting multiple electric cord or plug or a loose power appliances to a single wall outlet outlet e Otherwise it may result in fire e Otherwise it may result in due to overheating of the wall electric shock or fire outlet Avoid plugging in or unplugging Plug the power plug in firmly ler the power supply with wet hands e Otherwise it may result in fire e Otherwise it may result in electric shock Make sure to connect the power Avoid bending or twisting the power cord to a grounded wall outlet for cord excessively and avoid placing insulation class 1 equipment only heavy objects on the cord e Otherwise it may result in e Otherwise it may result in electric shock or injury electric shock or fire due to a damaged power cord English 4 Getting Started Keep the power cord and the product away from a heater e Otherwise it may result in electric shock or fire If the pins of the power plug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Avoid unplugging the power plug Make sure to use only the power while the product is operating v cord supplied by our company In e Otherwise it may damage the addition do not use the power cord product due to electric shock Cf of another electric appliance SP e Otherwise it may result in electric shock or fire When unplugging the power plug Connect the power plug
60. nnels Search Mode Full Network Quick Scans for all channels with active broadcast stations and stores them in the TV if you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by pressing the button on the remote control e Network Auto Manual Selects the Network ID setting mode among Auto or Manual Network ID When Network is Manual you can set up Network ID using the numeric buttons e Frequency Displays the frequency for the channel differs in each country e Modulation Displays available modulation values Symbol Rate Displays available symbol rates English 24 Basic Features E Cable Search Option depending on the country Sets additional search options such as the frequency and symbol rate for a cable network search Start Frequency Stop Frequency Set the start or stop frequency differs in each country Symbol Rate Displays available symbol rates Modulation Displays available modulation values Manual Tuning Scans for a channel manually and stores in the TV amp If a channel is locked using the Channel Lock function the PIN input window appears m Digital Channel Tuning Scans for a digital channel 1 Press the EN button to select New amp When selecting Antenna Air Channel Frequency Bandwidth amp When selecting Antenna Cable Frequency Modulation Symbol Rate 2 Press the w button to sel
61. o exit Anynet Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press APY and PRE CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to Anynet device appears on the screen You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynet setting or switching to view mode is complete The Anynet device does not play You cannot use the play function when Plug amp Play Initial setup is in progress The connected device is not displayed Check whether or not the device supports Anynet functions Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Search Anynet devices again You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected please repeat the device scan The TV Programme cannot be recorded Check whether the antenna jack on the recording device is properly connected The TV sound is not output through the receiver Connect the optical cable between TV and the receiver English 44
62. of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port USB HDD is not supported e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Do not disconnect the USB device while it is loading e The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360X8640 pixels e For unsupported or corrupted files the Not Supported File Format message is displayed e Ifthe files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction e Ifthe TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk dr
63. of the product amp The actual appearance of the TV may differ from the images in this manual depending on the model 8o Be careful when you touch the TV Some parts can be somewhat hot Installation with a stand Installation with a wall mount 10cm 10cm 10cm 10cm AP eee a e An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual b you bring the unit to a repair centre and there is no defect in the product i e where you have failed to read this user manual e The amount of such administration charge will be advised to you before any work or home visit is carried out English 2 Contents Getting Started Connections Basic Features Advanced Features Other Information Lop k ck BAON a a N anna a 20 21 21 22 22 24 25 29 30 34 36 41 45 46 47 48 48 49 53 54 Safety Precautions Accessories Installing the Stand Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug amp Play Initial Setup Connecting to an AV Device Connecting to a COMMON INTERFACE slot Connecting to an Audio Device Connecting to a PC Changing the Input Source How to Navigate Menus Using the INFO button Now amp Next guide Using the Channel Menu Channel Menu
64. on Buttons Yellow Edit Mode Lets you select music by checking the files you want to play Only available in Music o 4 gt gt Page Move to next or previous page e 7 Tools Displays the option menu e 9 Return Move to the previous step Videos Playing Video 1 Press the a w 4 P button to select the desired video in the file list 2 Press the ENTERC button or gt Play button The selected file name is displayed on the top with its playing time If video time information is unknown play time and progress bar are not displayed During video playback you can search using 4 and P button You can use ed REW and gt gt FF buttons during playback English Mc O In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip Srt string based 4 gt Jump 7 Tools D Return SubViewer sub string based The displayed i differ d di A del e displayed image may differ depending on the model Micro DVD Sub or txt string based Pa B d P 9 English 3 7 Advanced Features Supported Video Formats File Extension Container Video Codec Resolution HE Pirate Audio Codec fps Mbps Divx 3 11 4 x 5 1 6 0 1920x1080 6
65. ot use new and used batteries together e This may cause a battery to break or leak and may cause fire injury or contamination damage 3 O e2 BO Take care when adjusting the angle of the product or the height of the stand e f your hand or finger is caught you may be injured e If the product is tilted excessively the product may fall and this may result in injury When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to anearby public recycling centre or to a store selling the same type of the battery or rechargeable battery English 10 Getting Started SO Please make sure the following items are included with your TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models SO Cables not included in the package contents can be purchased separately SO Check that there
66. p function is not supported Some USB digital camera devices may not be compatible with the player Video Decoder Audio Decoder Supports up to H 264 Level 4 1 H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported XVID MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max GMC 2 over is not supported Supports up to WMA 7 8 9 STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio WMA sampling rate 22050Hz mono is not supported English 38 Advanced Features Music Playing Music 1 Press the a w 4 b button to select the desired Music in the file list 2 Press the ENTERC button or You can use 44 REW and playback Q Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are gt saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Playing selected music 1 Press the A Edit Mode button 2 Select the desired music The v mark appears to the left of the selected files 3 Press the TOOLS button and select Play Selected Contents O You can select or deselect all music pressing the Select All Deselect All Photos Viewing a Photo or Slide Show Play button FF buttons
67. parity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level amp According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB DY To increase or decrease the volume adjust between the range O and 10 respectively English 29 Basic Features Em SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio output SPDIF format amp The available Digital Audio output SPDIF format may differ depending on the input source Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms E Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound QD Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Speaker Settings E Speaker Select External Speaker TV Speaker A sound echo may occur due to a dif
68. picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue Others The picture won t display in full screen HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work The cable set top box remote control doesn t turn the TV on or off or adjust the volume Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly p 27 There is a plastic smell from the TV This smell is normal and will dissipate over time The TV Signal Information is unavailable in the Self Diagnostic Test menu This function is only available with digital channels from an Antenna RF Coax connection p 35 The TV is tilted to the side Remove the base st
69. product may fall and this e This may result in electric shock may result in damage to the or fire product or injury e If you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire English 5 Getting Started Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fireplace or heater e This may shorten the product life cycle or cause fire Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in e f rainwater enters the product it may result in electric shock or fire Do not let the product drop while moving it e This may result in a problem with the product or injury When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to m
70. put source the picture size options may vary The available items may differ depending on the selected mode e In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the TV If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function E 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size amp Not available in PC Component or HDMI mode English 26 Basic Features E PC Screen Adjustment Available only PC mode Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen Position Adjusts the PC screen position with direction button a w q p Image Reset Resets the image to default settings D Setting up the TV with Your PC Select the input source to PC MENU II gt Picture gt ENTERC Auto Adjustment 779 Frequency values position and fine tune are adjusted automatically 8 Not available when connecting with an HDMI to DV
71. r off and unplug the power cord Contact a service centre e Otherwise it may result in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is dangerous e Otherwise it may result in electric shock or fire Avoid moving the product by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e If achild hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark m
72. re does not function in the same mode NOTE e For PIP sound refer to the Sound Select instructions e Ifyou turn the TV off while watching in PIP mode the PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While Program Rating Lock is in operation the PIP function cannot be used PIP settings Main picture Sub picture Component HDMI1 DVI TV HDMI2 PC PIP Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen Size l _ Select a size for the sub picture Position 7 CF L sub picture Select a position for the Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Support Menu MENU I Support gt ENTERC Self Diagnosis O Self Diagnosis might take few seconds this is part of the normal operation of the TV Picture Test Yes No Use to check for picture problems Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device
73. re trademarks of SRS Labs Inc TheaterSound technology is incorporated under licence from SRS Labs Inc TheaterSound LO DOLBY Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE S dts 2 0 Digital Out Manufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 Open source licence notice In the case of using open source software Open Source licence are available on the produc
74. rpness Colour Tint G R Your television has several setting options for picture quality control Si NOTE In analogue TV Ext AV modes of the PAL system the Tint G R function is not available In PC mode you can only make changes to Backlight Contrast Brightness and Sharpness Settings can be adjusted and stored for each external device connected to the TV e Lowering picture brightness reduces power consumption Screen Adjustment m Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 Q Adjusts the Position by using a w buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size DQ Adjusts the Zoom or Position by using a w button 4 3 Sets the picture to basic 4 3 mode Dy Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention Screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted SI Adjusts the Position by using a w q gt button SD NOTE Depending on the in
75. s user manual Sound Test Yes No Use the built in melody sound to check for sound problems O it you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Yes If you can hear sound only from one speaker or not at all during the sound test select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If you can hear sound from the speakers select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual English 34 Basic Features Signal Information digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength Troubleshooting If the TV seems to have a problem refer to this description O If none of these troubleshooting tips apply contact the Samsung customer service centre Software Upgrade Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV amp Software is represented as Year Month Day_Version So
76. selected in the same way To display the previous or next mo co C Current page number page press the corresponding or search indications coloured button D Date and time mode Selects the Teletext S E E Text mode LIST FLOF 4 F Status information If pressed during LIST mode FASTEXT information switches the mode to List save mode In List save mode you can save a Teletext page into a list using the E9 store button sub page Displays the available sub page English 46 Other Information Attaching a Wall Mount Desktop Stand Preparing before installing Wall Mount Desktop Stand 1 Turn the product off and unplug the power cord from the wall outlet 2 Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down 3 Separate the screw at the rear of the product 4 Hold the main body of the product with your hand as shown by the figure Pull the stand in the direction of the arrow as shown in the figure to separate it Wall Desktop Stand Mount O Wall mount kit desktop stand not supplied 5 Align wall mount desktop stand to the Monitor TV and firmly fix the wall mount desktop stand by fastening the screw 6 Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw NOTE e If you use screws th
77. sh 53 Other Information inde OOOO O A F R Accessories da Film Mode 28 Receiver 42 Advanced Settings 27 Fine Tune 25 Recording 43 Amplify 29 Flesh Tone 28 Remote Control 14 Antenna 15 Repeat Mode 40 Anynet HDMI CEC 41 H RGB Only Mode 28 Audio Description 29 Rotate 40 Auto Adjustment 27 HDMI 4 Auto Volume 30 Headphones 19 S Home Theatre 41 B Safety Precautions 4 l Samsung MagicAngle 26 Background Music 40 Select All 24 Balance L R 29 Leche Space 2 Self Diagnosis 34 Batteries 14 MGKANO ROAD a 3 Sharpness 26 Black Tone 28 Installing the Device Driver 49 Signal Information 35 Brightness 26 Sleep Timer 31 L Slide Show 39 C Language 33 Software Upgrade 35 Cable Holder 48 ee naa Select Ha Change PIN 32 M Specifications 53 Channel List 23 Standby mode 13 Channel Manager 23 Menu Transparency 33 Subtitle 33 Channel Menu 24 Music 39 Symbol 3 Cleaning Related 7 My Downloads 36 Clock 30 T Colour Tone 28 N Component 17 Timer 31 Connecting to a PC 20 Navigate 21 Title Search 40 Connecting to an Antenna 15 Now 8 Next guide 22 TOOLS 3 Connecting to an Audio Device 19 Troubleshooting 49 Connecting to an AV Device 16 O TV Speaker 30 On Timer 31 D Off Timer 32 U DIGITAL AUDIO OUT 41 Optimal resolution 20 USB Drive 36 DivX VOD 33 Usage Related TA D sub 20 P Using the Channel Menu 22 Dynamic 25 ane Contrast 28 Protos a9 V Picture Options 28 Picture Size 26 VCR 16 E PIP Picture in Picture 34 Video Formats 38 Edit Name 21 Plug amp Play 1
78. t 06 00 Tine Team Home and No Information Fiv e Dark Angel No Information QVC Selection No Information Sche Mgr 24 Hours 24 Hours Ch Mode F Information Page C Watch e The displayed image may differ depending on the model e A Red Sche Mgr Displays the Schedule Manager e E Green 24 Hours Viewing the list of programmes to be broadcasted before 24 hours Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours e E Blue Ch Mode Select the type of channels you want to display on the Channel View window e 7 Information Displays details of the selected programme e S Page Move to next or previous page e 4 Watch Schedule When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTER C button again and select Cancel Schedules Schedule Manager CONTENT Watch TV gt Schedule Manager ENTERC You can view modify or delete a channel you have reserved to watch Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the ENTER C button to select Schedule Manager 2 Press the ENTERC button to add programme to schedule manually The Timer Viewing screen appears 3 Pressthe4 B a V buttons
79. t menu Open Source Licence Notice is written only English WEEE Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the Sa retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working li
80. to a wall from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product i Installation Related A Warning Avoid placing burning candles Ask an installation engineer or mosquitorepellentor cigarettes on relevant company to install the the product product onto the wall e Otherwise it may result in fire e Otherwise it may result in injury e Make sure to use the specified wall mount Avoid installing the product in a Keep the plastic bags used to pack Li badly ventilated location such as the product away from children di inside a bookshelf or closet e If children place the plastic Wii 7 amp 5 e Otherwise it may result in fire bags over their heads they may T due to internal over heating suffocate 9 Avoid installing the product in Avoid installing the product in a a location that is unstable or location exposed to dust moisture exposed to excessive vibration A Pa sauna oil smoke or water rain such as on an unstable or slanted pa drops and installing it within a shelf vehicle e The
81. to set the Antenna Channel Repeat Date or Start Time English 22 Basic Features e Antenna Select the desired antenna source e Channel Select the desired channel e Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want The v mark indicates the date is selected e Date you can set desired date SO Itis available when you select Once in Repeat e Start Time You can set start time you want On the Information screen you can change or cancel a reserved information Cancel Schedules Cancel a show you have reserved to watch Edit Change a show you have reserved to watch e Return Return to the previous screen Channel List a CONTENT Watch TV Channel List gt ENTER C You can view all the channel searched Channel List Antenna Programme View 4b Ch Mode Watch Page e The displayed image may differ depending on the model Sy When you press the CH LIST button on the remote control Channel List screen will be displayed at once Using the operation buttons with the Channel List M Red Antenna Switches to Air or Cable Yellow Programme View Channel View Displays the programme when digital channel is selected Returns to the channel view 4 gt Ch Mode Channel Move to the type of channels you want to display on the Channel List screen The option may differ
82. tting Vv Vv Vv Subtitle Language You can view a subtitle You can select a specific language if the subtitle file contains v multiple languages Subtitle Setting You can play the video with Subtitles This function only works if the subtitles are the same v file name as the video Audio You can enjoy video in one of supported languages as required The function is only v enabled when stream type files which support multiple audio formats are played Start Slide Show You can start or pause a Slide Show Pause Slide Show v Slide Show Speed You can select the slide show speed during the slide show Vv Background Music You can on off background music when watching a Slide Show Vv Background Music You can select background music when watching a Slide Show Vv Setting Zoom You can zoom into images in full screen mode Vv Rotate You can rotate images in full screen mode Vv Information You can see detailed information about the played file Vv Vv Vv English 40 Advanced Features Anynet HDMI CEC What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it e You can only control Anynet devices using the TV remote control not the buttons on the TV
83. unction Make sure to switch to an Anynet device by using the Device List English 42 Advanced Features D Recording You can make a recording of a TV Programme using a Samsung recorder 1 Select Recording amp When there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List amp when the recording device is not displayed press the EY button in the Device List menu to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name QD Pressing the REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual D Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit O If your receiver supports audio only it may not appear in the device list amp The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theatre is s
84. ver VCR DVD Blu ray player AUDIO OUT COMPONENT our Aunio OUT voeo our VCR DVD piece Red Blue Green Red White Yellow amp In Ext mode DTV Out supports MPEG SD Video and Audio only O When connecting to AV IN the colour of the AV IN VIDEO jack green will not match the video cable yellow amp To obtain the best picture quality the Component connection is recommended over the A V connection English 1 7 Connections Connecting to a COMMON INTERFACE slot Attaching the CI Card Adapter Attach the adapter as shown below To connect the CI CARD Adapter follow these steps TV Rear O We recommend attaching the adapter before installing the wall mount or 1 inserting the Cl or Cl CARD Insert the Cl CARD Adapter into the two holes on the product amp Please find a two holes on the rear of the TV A two holes is beside the COMMON INTERFACE port Connect the Cl CARD Adapter into the COMMON INTERFACE port on the product Insert the Cl or Cl CARD We recommand that you insert the Cl card before you mount the TV on a wall It may be difficult to insert after the mounting Insert the card after attaching the CI CARD Adapter on TV It is difficult to attach the module if you insert the card before attaching Using
85. xt mode for the SOURCE E _ Teletext page current channel Press the button twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext 9 store Stores the Teletext pages E7 size Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press it again For normal display press it once again hold Holds the display at the current page in the case that there are several secondary pages that follow automaticially To undo press it again Colour buttons red green yellow blue If the FASTEXT system is used by the broadcasting company the different topics on a Teletext page are colour coded page down Displays the previous Teletext page index Displays the index contents page at any time while you are viewing Teletext reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again cancel Shrinks the Teletext display to overlap with the current broadcast Typical Teletext page and can be selected by pressing Part Contents the coloured buttons Press the C A Selected page colour corresponding to the topic Aumiber of your choice A new colour CL B Bagana coded page is displayed Items C identity g can be
86. y E Equalizer Adjusts the sound mode Balance L R Adjusts the balance between the right and left speaker 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equalizer to its default settings O fl Sound Systems Etc MENU II Sound gt ENTER C Broadcast Audio Options H Audio Language digital channels only Change the default value for audio languages amp The available language may differ depending on the broadcast E Audio Format digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function amp Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable H Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster Audio Description Off On Tum the audio description function on or off amp Volume Adjust the audio description volume Additional Setting digital channels only H DTV Audio Level MPEG HE AAC This function allows you to reduce the dis

Samsung T22A350

Contents

Download Pdf Manuals

Related Search

Related Contents