Samsung SDC3C801 tumble dryer
Contents
1. tE2 Clogged filter case is restricted Clean the filter case or condenser tE4 If the problem continues call for service dE Running the dryer with door open Close the door and then restart If the problem continues call for service dF Door is not closing properly Call for service bE Button stuck for more than 30 secs Make sure a button is NOT being oressedcontinuously Try restarting the cycle If the problem continues call for service hE Clogged filter case is restricted Clean the filter case or condenser Invalid heating Temp when running If the problem continues call for service the dryer Et EEPROM is not communicating Try restarting the cycle lf the problem properly continues call for service 3E The motor does not work properly Try restarting the cycle lf the problem continues call for service SE The water tank is full of water Empty the water tank and start again The drain pump is out of order If the problem continues call for service For any codes not listed above or if the suggested solution doesn t fix the problem call your Samsung Service Centre or local Samsung dealer 30_ troubleshooting aooencix FABRIC CARE CHART The following symbols provide garment care direction The Clothing care labels include symbols for drying bleaching drying and ironing or dry cleaning when necessary The use of symbols ensures consistency among garment manufacturers of domestic and imported items Fol2. Condensing Dryer user manual 100 Recycled Paper imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Psa SUN features 1 2 features Super capacity Ultra drying capabilities are at your fingertips Now you can dry extra large loads Our large 8kg capacity dryer circulates more air through your clothes drying them faster for a wrinkle free result Visible water tank indicator For the first time in the industry users can see the water level of the water tank through the transparent scale panel without having to open the water tank Sensor drying fully automatic drying By adopting humidity and temperature sensors the operating time and energy usage is controlled using digital technology Interior lamp The interior lamp allows the easy viewing of the interior even when it is dark Rack drying This is a low temperature drying function developed to protect fragile fabrics from the tumbling process and to dry items such as sports shoes that cannot be dried by the tumble drying course Certificated wool course The wool mark certified course minimizes damage when drying wool clothes a WOOLMARK d M1006 Woolmark approval number APPAREL CARE Reversible door for easier door opening at any location Our dryers will fit just about anywhere and without a door confl
3. Tools needed for installation See Dryer Exterior Check before installing Before using the product Important to installer Location considerations Alcove or closet installation Electrical requirements Grounding Installation side by side Final installation checklist Draining water without using the water tank Connecting the drain hose Installation stacking Door Reversal Overview of the control panel Child lock Signal off My cycle Delay End Interior Lamp Rack Dry Load the dryer properly Getting started Clean the filter case Clean the condenser Control Panel Tumbler Stainless Steel Tumbler Dryer Exterior Dumping condensed water 4 Cleaning the filter case EE Cleaning the condenser assembly Special laundry tips Check these points if your dryer Information codes Fabric care chart Protecting the environment Declaration of conformity Specifications Cycle chart Consumption data installing your dryer TOOLS NEEDED FOR INSTALLATION Hire a professional to install this dryer properly If there is a service call performed as a result of poor setup adjustment and connection it is considered the responsibility of the installer If you install the dryer you are responsible Make sure you have everything necessary for proper installation AC 220 240V 50HZ 1 A GROUNDED ELECTRICAL OUTLET is required See Electrical Requirements See page 11 2 CONDENSING SYSTEM Condenses processes and c
4. manufacturer This may result in damage to the laundry Do not use the dryer near dangerous powders such as coal dust wheat flour etc This may result in electric shock fire or an explosion Do not place inflammable materials near the product This may result in toxic gases from the product damage to parts electric shock fire or an explosion The appliance should not be placed behind lockable doors etc A SEVERE WARNING SIGNS FOR CLEANING Do not clean the appliance by spraying water directly onto it Do not use benzene thinner or alcohol to clean the appliance This may result in discolouration deformation damage electric shock or fire Before cleaning or performing maintenance unplug the appliance from the wall socket Failure to do so may result in electric shock or fire Clean the filter case before and after using the dryer Clean the inside of the product on a regular basis by asking an authorized service engineer Clean the condenser with water once a month The interior of the dryer should be cleaned periodically by qualified service personnel safety information _7 contents INSTALLING YOUR DRYER OPERATING INSTRUCTIONS TIPS CARE AND CLEANING SPECIAL LAUNDRY TIPS TROUBLESHOOTING APPENDIX 8 contents 9 10 10 10 10 10 11 11 12 12 13 13 15 16 18 20 20 21 21 21 22 23 23 24 24 24 24 24 24 25 25 26 27 28 30 31 32 32 32 33 34
5. Do not stand on top of the appliance or place objects such as laundry lighted candles lighted cigarettes dishes chemicals metal objects etc on the appliance This may result in electric shock fire problems with the product or injury Do not touch the glass door and inside of the drum during or just after drying as it is hot This may result in burns Do not press the buttons using sharp objects such as pins knifes fingernails etc This may result in electric shock or injury Do not use dry cleaning detergent directly and do not wash rinse or spin laundry contaminated by dry cleaning detergent This may result in soontaneous combustion or ignition due to the heat of the oxidation of the oil Do not dry laundry containing forming rubber latex or similar rubber textures lf forming rubber is heated it may start a fire Do not dry laundry contaminated by vegetable oil or cooking oil as a large amount of the oil will not be removed when washing the laundry In addition use the Cool Down cycle so that the laundry is not heated The oxidization heat of the oil may start a fire Make sure that the pockets of all clothing to be washed are empty Hard sharp objects such as coins safety pins nails screws or stones can cause extensive damage to the appliance Do not wash clothing with large buckles buttons or other heavy metal Do not use softener or a static electricity remover unless recommended by the
6. USING both hands as it is heavy and take care not to spill any water inside the tank 2 Remove the condensed water inside the water tank Drain hole e Remove the condensed water in the tank after every drying operation Since there is a danger of water leaking if you do not drain warning tne water after using the product make sure to drain the water ONINVATO ANY 3YVO 60 4 If you empty the water tank and press the Start button the Water Tank Full amp in the LED panel is turned off CLEANING THE FILTER CASE E 1 Open the door and remove the filter by pulling it upwards Filter case 2 Open and clean the filter case e Clean the filter case after the drying operation is completed e Since the drying performance may be degraded and there is a danger of fire if you do camon NOL Clean the filter case after the specified period of use clean the filter case at the specified cleaning interval e Since the drying performance may be degraded and there is a danger of fire if you use a damaged or broken filter case replace the filter case in this case e Clean the filter case after every drying operation g e f the surface of the filter is wet use the filter after drying it completely A e lf you clean the filter case and press the Start button the Filter g in the LED panel is turned off care and cleaning _25 care a
7. and condenser and clean them if necessary Dryer may have moved into the cool down phase of the cycle Doesn t dry Check all of the above plus Do not overload 1 wash load 1 dryer load Sort heavy items from lightweight items Large bulky items like blankets or comforters may require repositioning to ensure even drying Check that the dryer is draining properly to extract adequate water from the load Load may be too small to tumble properly Add a few towels Clean the filter case Clean the Condenser Check if the cooling air vent is blocked Is noisy Check the load for objects such as coins loose buttons nails etc Remove promptly Be sure the dryer is leveled properly as outlined in the installation instruction It is normal for the dryer to hum due to the high velocity of air moving through the dryer drum and fan Dries unevenly Seams pockets and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level This is normal Select the Extra Dry setting if desired If one heavy item is dried with a lightweight load such as one towel with sheets It is possible that the heavy item will not be completely dry when the rest of the load has reached the selected dryness level Sort heavy items from lightweight items for best drying results Has an odour Household odors from painting varnishing strong cleaners etc may enter the dryer
8. damaged it must be replaced by the manufacturer or its service agent or a similar qualified technician in order to avoid a hazard This appliance should be positioned to be accessible to the power plug after installation Do not pull or excessively bend the power cord Do not twist or tie the power cord Do not hook the power cord over a metal object place a heavy object on the power cord insert the power cord between objects or push the power cord into the space behind the appliance This may result in electric shock or fire Do not pull the power cord when unplugging the power plug Unplug the power plug by holding the plug Failure to do so may result in electric shock or fire This appliance must be properly grounded Never plug the power cord into a receptacle that is not grounded adequately and in accordance with local and national codes See installation instructions for grounding this appliance safety information 5 satety information ZX SEVERE WARNING SIGNS FOR USING Do not let children or pets on or into the product In addition when disposing of this product disassemble the door lock lever This may result in children falling and injuring themselves If children become locked in the product there is a danger of suffocation Do not try to access the inside of the product when the drum is rotating Do not sit on the product or lean against the door This may result in the product turning ove
9. drain hose and the hose guide and fix them with the cable tie 3 You can drain the condensed water by connecting the accessory hose long drain hose to the drain outlet directly Connecting the direct hose You can immediately drain the condensed water that comes out while drying by connecting the drain hose to the tap 1 Assemble the hose connector and the hose Since there is a danger of water leaking from the hose A connecter and accessory hose make sure that they are ane connected firmly Hose Connecter 2 Connect the end of the hose to the tap 14_ installing your dryer INSTALLATION STACKING In case of purchasing the additional stacking kit contact our Samsung service center or local A distributers Part no SK DH DC98 01330A SK DA DC98 01 330B 1 Carefully lay the dryer on its side Use the packing material so you don t scratch the finish on the dryer 2 Install rubber pads to dryer base e Locate the 4 rubber pads in the parts package Insert the rubber pads into the holes at the bottom of the levelling legs e Purchase the stacking kit package additionally YSAdd YNOA ONITIVLSNI LO 3 Set the dryer upright The stacking kit can only be installed for Samsung family products CAUTION only applicable to WFO80 WF990 WESSO and WF880 4 Install bracket to dryer e Remove washer top cap screw f
10. e Do not place inflammable objects near the dryer and keep the surroundings clean e Keep the dryer level with the ground e Do not remove the adjustable levelling feet of the dryer They are necessary to keep the product level with the ground IMPORTANT TO INSTALLER Please read the following instructions carefully before installing the dryer These instructions should be kept for future reference A REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD SUFFOCATING LOCATION CONSIDERATIONS Because a condensing type has been adopted which condenses and processes air inside the dryer external ventilation is not required Therefore The dryer can be installed and used in any location where the temperature is between 5 and 35 degrees centigrade unlike a conventional dryer that requires an external exhaust system ALCOVE OR CLOSET INSTALLATION To operate safely and properly your new Dryer requires minimum clearances of Sides 25 mm Rear 51 mm Top 25 mm Front 465 mm If both the washing machine and a dryer are installed together the front of the alcove or closet must have at least 465 mm unobstructed air opening 10_ installing your dryer ELECTRICAL REQUIREMENTS Electrical Requirements is AC 220 240V 50Hz AN e Improper connection of the equipment grounding conductor can result in a risk of electric shock WARNING Check with a qualified electrician or serviceman if you are in do
11. is set the Delay End function becomes ON state Press the Start Pause button The Delay End indicator will blink and the clock will begin counting down until it reaches the set time To cancel a Delay End function press the Power button and then turn the dryer on again INTERIOR LAMP Lights the dryer drum while the dryer is running Setting amp releasing If you want to set or release the Interior Lamp press both the Interior Lamp buttons simultaneously g This can be set as long as the power cord is connected to the wall outlet If you do not turn A the Drum Light off within 5 minutes of turning it on it is automatically turned off operating Instructions tips _21 operating Instructions tlos RACK DRY Installing the drying rack 1 2 NO b 4 8 Open the dryer door Position the drying rack in the tumbler placing the front lip of the drying rack on the top of the lint filter case Place the rear legs in the two recessed areas of the dryer s back wall then push down the middle of the drying rack to fix Place the items to be dried on the rack leaving space between them so air can circulate Close the dryer door Press the Power button Select Time Dry by using the cycle selector dial set the time and then press the Rack Dry button e You can set a drying time up to 90 minutes The temperature setting is automatically set to Low and cannot be changed Select the time accordi
12. you decide to dispose of this appliance please observe local waste disposal regulations Cut off the power cord so that the appliance cannot be connected to a power source Remove the door so that animals and small children cannot get trapped inside the appliance DECLARATION OF CONFORMITY This appliance complies with European safety standards EC directive 93 68 and EN Standard 60335 SPECIFICATIONS TYPE FRONT LOADING DRYER DIMENSIONS A Height 84 8 cm B Width 59 8 cm C Depth with door open 90 108 6 cm D Depth 63 4 cm WEIGHT 44 5 kg HEATER RATING 2500 W 1750 W 750 W POWER CONSUMPTION NO HEAT 175 W HEATING 2675 W He drum illumination LED Different according to model To replace the LED illumination please contact our service line 32_ appendix CYCLE CHART e user option Cycle seared Temp Time Delay My Mixed _ Interior Wrinkle Sound se Dry End Cycle Load Bell Lamp Prevent Off main 2 Laundry gt Extra Dry High 134 e e e e e e 5 Cotton Cupboard Dy 8 High 119 o o 5 5 lron Dry High 99 e e e e 5 i Extra Dry Medium 59 e e e e e 5 Synthetics Cupboard Dry 4 Medium 49 e e e e e e 5 Iron Dry Medium 39 e e e e e 5 Wool Woon 1 Low 27 e e e e 1 Mi eae approval number Ultra Delicate 1 Low 35 e
13. T USING THE WATER TANK You can use the dryer without using the water tank by following the procedures below CONNECTING THE DRAIN HOSE The Dryer can pump the condensed water outside of the DRYER directly with dain hose provide The procedures to connect the drain hose are as follows Y3Add YNOA ONITIVLSNI LO 1 Disconnect the drain hose 4 2 Connect the drain hose A to the other hole 3 Connect accessory hose long drain hose to the hole next to the hole that is connected to drain hose a AN e When connecting hose e take care that the height CAUTION of the hose does not exceed 90cm e After connecting the drain hose you can directly drain the condensed water via the drain outlet through the connected drain hose or through the washstand or the drain outlet of the washstand installing your dryer _13 installing your dryer Connecting the drain hose The end of the drain hose can be positioned in three ways 1 Over the edge of a wash basin The drain hose must be placed lower than 90cm If the end of the drain hose needs to be placed above the ground we recommend a height of 60cm 90cm To keep the drain hose spout bent use the supplied plastic hose guide Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving Drain hose 90 cm Hose guide Cable Tie 2 Assemble the
14. al To install 1 Move your dryer to an appropriate location for installation Consider installing the dryer and washer side by side Lay two of the carton cushion tops on the floor Tip your dryer on its side so it will lay across both cushion tops 2 Set your dryer back in an upright position 3 To ensure that the dryer provides optimal drying performance it must be level To minimize vibration noise and unwanted movement the floor must be a perfectly level solid surface To set the dryer to the same height as the washer fully retract the levelling feet by turning them counterclockwise then loosen the legs by turning them clockwise 4 N Levelling feet Comm Retract fully Then loosen Wi 4 Adjust the levelling feet only as much as necessary to level the dryer Extending the levelling feet more than necessary can cause the dryer to vibrate 4 Review Electrical Requirements section See page 11 BEFORE OPERATING OR TESTING 5 With a level check your dryer and make necessary adjustments to the levelling legs 6 Plug in your dryer and check operation by using the checklist below FINAL INSTALLATION CHECKLIST O Dryer is plugged into electrical outlet and is properly grounded O Dryer is leveled and is sitting firmly on the floor O Start your dryer to confirm that it runs heats and shuts off 12_ installing your dryer DRAINING WATER WITHOU
15. e e e e e 3 Freshen Up 1 5 High 30 e e e 5 Sports Wear 1 5 Low 50 e e e e e 5 Quick Dry High 29 e e e e e 8 Time Dry High 40 e e e 8 Warm Air Low 20 e e e o e 5 Cool Air N A 20 e e e Depending on the percentage of wool in the laundry the time may extend up to 43 minutes appendix _33 aooencdkx CONSUMPTION DATA Final spin speed Ina Program Load kg domestic washing machine Ener kWh Duration Minutes Rpm 1000 60 residual moisture 4 49 119 Cotton Cupborad 1400 50 residual moisture 4 18 110 1000 60 residual moisture 3 96 96 Cotton Iron 9 1400 50 residual moisture 3 44 87 1 Weight of dry laundry EN 61121 2005 test program 2 All data without a star against it was calculated using EN 61121 2005 Consumption data can vary from the nominal values given above depending in the size of the load types of textiles residual moisture levels after spinning fluctuations in the electricity supply and any extra options selected 34_ appendix memo QUESTIONS OR COMMENTS Country CALL OR VISIT US ONLINE AT SOUTH AFRICA O860 SAMSUNG 726 7864 www samsung com Code No DC68 02805K 02_EN
16. ess it once and it will pause the dryer Press it again to restart the dry cycle 12 Power button Press once to turn your dryer on press again to turn it off If your dryer is left on for more than 10 minutes without any buttons being touched the power automatically turns off operating Instructions tips _19 operating Instructions tlos CHILD LOCK A function to prevent children from playing with your dryer Activating Deactivatin If you want to activating deactivatin the Child Lock press both the Temp and Time buttons simultaneously for 3 seconds The Child Lock will be lit when this feature is activated 7 Z e When the power is turned on the Child Lock function is O available e Once you set the Child Lock function no button w except for the Power button will respond until you 7 oo release the Child Lock function a a ee ee e f the dryer is powered on again the Child Lock function stays on e When other buttons except for the Power button do Q Q not respond check the Child Lock indicator to see if the function is on dm SIGNAL OFF The Signal Off function can be selected during all courses When this function is selected sound is turned off for all courses Even if the power is turned on and off repeatedly the setting is retained Activating Deactivatin If you want to activate or deactivate the Signal Off function oress the Rack Dry and Wrinkle Prevent button
17. gher and use the socket for this appliance only In addition do not use an extension cord Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire Ensure that the power voltage frequency and current are the same as those of the product specifications Failure to do so may result in electric shock or fire Failure Plug the power plug into the wall socket firmly Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis Unplug the power plug and clean it with a dry cloth Failure to do so may result in electric shock or fire Keep all packaging materials well out of the reach of children as packaging materials can be dangerous to children lfa child places a bag over its head it may result in suffocation D This appliance must be properly grounded Do not ground the appliance to a gas pipe plastic water pipe or telephone line This may result in electric shock fire an explosion or problems with the product Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes Do not install or Keep the product exposed to the outdoor elements N Do not use a damaged power plug damaged power cord or loose wall socket This may result in electric shock or fire If the plug power supply cord is
18. ict The direction of our easy reversible door can be changed with simple handy work Diamond drum for fabric care Samsung electronics proprietary diamond shaped drum offers excellent protection to your laundry High energy efficiency Energy efficiency has been optimised to minimize unnecessary power Consumption sale information Congratulations on your new Samsung Dryer This manual contains important information on the installation use and care of your appliance Please take the time to read this manual to take full advantage of your dryer s many benefits and features N WARNING Risk of Fire e Clothes dryer installation must be performed by a qualified technician e install the clothes dryer according to the manufacturer s instructions and local codes e To reduce the risk of severe injury or death follow all installation instructions WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur It is your responsibility to use common sense caution and care when installing maintaining or operating your dryer Always contact your manufacturer about problems or conditions you do not understand IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS Hazards or unsafe practices that may result in severe personal injury or warning death Hazards or unsafe practices that
19. improves the tumbling action and drying efficiency Overloading restricts tumbling action resulting in uneven drying as well as excessive wrinkling of some fabrics Make sure to insert laundry that has been spun by an appropriate washing machine No unwashed textiles should be dried Textiles which have been in contact with oil alcohol petrol etc should not be dried GETTING STARTED eo PS Ns gS Load your dryer loosely DO NOT overload Close the door Select the appropriate cycle and options for the load see pages 20 21 Press the Start Pause button The dryer indicator light will illuminate The estimated cycle time will appear in the display The time may fluctuate to better indicate drying time remaining in the cycle e When the cycle is complete and End will appear in the display e Pressing Power cancels the cycle and stops your dryer e The Drying Cooling and Wrinkle Prevent indicator lights will illuminate during those portions of the cycle operating Instructions tips _23 SdIL SNOILONYLSNI ONILVY3dO Z0 care and cleaning CLEAN THE FILTER CASE e After each load e To shorten drying time e To operate more energy efficiently Do not operate your dryer without the filter case in place There is a danger of damaging the laundry when drying laundry without the filter case CAUTION CLEAN THE CONDENSER e Clean once a month e Clean with water If you do not clean it f
20. ine washable and tumble dryable wool only Load should be under 1 0 kg The Wool cycle of this machine has been approved by Woolmark company WOOLMARK for Total Easy Care Wool products M1006 Woolmark approval number Ultra Delicate The Delicates cycle is designed For lingeries at a low drying temperature Freshen Up With this cycle the odors can be removed and especially this cycle freshens garments Sports Wear Use for water proofed or proofed garments to keep their good looks and fresh feel except Gore Tax For better drying results turn the laundry inside out before drying it 4 Overloading the dryer may not yield the same results For the Max Load of each drying course refer to the Cycle Chart in the appendix My Cycle Selection Button Choose your favorite cycle including cycle temp Drying level option etc See page 21 for detail Delay End Selection Button Press this button repeatedly to cycle through the available Delay End options from 4 hours to 19 hours in one hour increments The hour displayed indicates the time when the dry cycle will be finished Temp Selection Button SdIL SNOILONYLSNI ONILVY3dO Z0 Press this button repeatedly to cycle through the available temperature level for the drying a 606 6 9 Time Selection Button When using Manual Dry cycles time can be adjusted by pressing the Time Selection button 20min gt 30min gt 40min gt 50min gt 6O
21. irculates hot and humid air internally using an internal heat condenser SEE DRYER EXTERIOR sA AB Plug Work top o0 k a Control panel rS 0 0 0 0 Water tank Door Filter case Condenser Levelling feet Parts lt Hose guide Cable tie Hose connector Long drain hose 2m Manual book installing your dryer _9 dJAHYGa YNOA ONITIVLSNI LO installing your dryer CHECK BEFORE INSTALLING e Do not plug the power cord into the wall outlet before completing the dryer installation e Check the appearance of the product for any damaged parts before starting the product installation e lf there are any parts that appear to be damaged please contact your nearest Samsung Customer Service Center e When moving the product do not move the product by yourself e lake care of the edges of the dryer as they can be sharp e Do not install the dryer in a location exposed to frost Cold water may damage the product e Use the product indoors only e Do not place the dryer on one side when lifting it and do not move the dryer in such a way that the internal parts shake This may result in damage to the internal parts of the product BEFORE USING THE PRODUCT e Check if there are any accessories remaining inside the drum e Plug in the power cord just before operating the product e Do not block the air inlet hole of the cooling grill at the front of the dryer
22. low care label directions to maximize garment life and reduce laundering problems Warning Symbols for O O 5 Wash Cycle Special Instructions Laundering Y Z wW Normal Line Dry Hang to Dry Ft Do Not Wash Permanent Press C Wrinkle Resistant m Drip Dry gt Do Not Wring Wrinkle Control Gentle Delicates E Dry Flat he Do Not Bleach 4 Hand Wash Heat Setting Jk Do Not Tumble Dry ae No Steam added to Water Temperature E High iron eee Hot C Medium z Do Not Iron ee Warm Low Dryclean e Cold Any Heat Dry Clean Bleach NoHeat Air x Do Not Dry Clean Any Bleach when needed O lron Dry or Steam Temperatures Line Dry Hang to Dry Only Non Chlorine color safe A High m Drip Dry Bleach when needed Tumble Dry Cycle FA Medium E Dry Flat Normal a Low Permanent Press Wrinkle Resistant Wrinkle Control Gentle Delicates D 0 The dot symbols represent appropriate wash water temperatures for various items The temperature range for Hot is 41 52 C for Warm 29 41 C and for Cold 16 29 C Wash water temperature must be a minimum of 16 C for detergent activation and effective cleaning appendix _31 aooencix PROTECTING THE ENVIRONMENT This appliance is manufactured from recyclable materials If
23. may result in minor personal injury or CAUTION property damage To reduce the risk of fire explosion electric shock or personal injury when using your washer follow these basic safety precautions gt CAUTION Do NOT attempt Do NOT disassemble Do NOT touch Follow directions explicity Unplug the power plug from the wall socket Make sure the machine is grounded to prevent electric shock Call the service center for help Note BRN He PB I Read operator s manual safety information _3 satety information This appliance is not intended for use by persons including children with reduced physical sensory or warning Mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and warning Spread out so that the heat is dissipated 4_ safety information A SEVERE WARNING SIGNS FOR INSTALLATION A The installation of this appliance must be performed by a qualified technician or service company Failure to do so may result in electric shock fire an explosion problems with the product or injury Plug the power cord into an AC 220 240V 50Hz wall socket or hi
24. min gt 7Omin gt 80min gt 90min During the Sensory Dry cycle the time indicator of manual is off because exact drying times are determined by fluctuating humidity levels Rack Dry Selection Button Rack Dry is available only at time dry cycle Temperature will be set only to Low page 22 for detail Wrinkle Prevent Selection Button Wrinkle Prevent provides approximately 60 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling Press the Wrinkle Prevent button to activate this feature The indicator light above the pad will illuminate when Wrinkle Prevent is selected Dried laundry is prevented from becoming wrinkled by periodic drum rotations after the completion of the drying course Even after End is displayed the drum rotates intermittently Interior Lamp Selection Button Lights the dryer drum while the dryer is running It can be set while your dryer is not only running but also when it is stopped If you do not turn the Drum Light off within 4 minutes of turning it on it is automatically turned off 4 Mixed Load Bell Selection Button This is an alarm that notifies the user when the average drying level is damp dry 80 dried when the laundry contains various types of materials and fabric If the corresponding condition is satisfied the Mixed load bell LED blinks Start Pause selection button Press to start a dry cycle If the dryer is running pr
25. n cupboard and the Low or Low temperature setting Adding a couple of dry towels shortens drying time and absorbs moisture Foam Rubber rug backs stuffed toys shoulder pads etc DO NOT dry on a heat setting Use the Cool Air cycle no heat WARNING Drying a rubber item with heat may damage it or be a fire hazard Pillows Use the Cotton cupboard Add a couple of dry towels to help the tumbling action and to fluff the item DO NOT dry kapok or foam pillows in dryer Use the Cool Air cycle Plastics shower curtains outdoor furniture covers etc Use the Cool Air cycle or the Time Dry cycle and the Low or Low temperature settings depending on the care label instructions THINGS TO AVOID Fiberglass items curtains draperies etc Woolens unless recommended on the label Vegetable or cooking oil soaked items special laundry tips _27 SdiIL AYGNNV1 TVIOAdS VO troudIESNOOTINEG CHECK THESE POINTS IF YOUR DRYER PROBLEM SOLUTION Doesn t run Make sure the door is latched shut Be sure the power cord is plugged into a live electrical outlet Check the home s circuit breaker and fuses Press the Start Pause button again if the door is opened during the cycle Empty the water in the condensed water tank Clean the filter case Doesn t heat Check the home s circuit breaker and fuses Select a heat setting other than Cool Air Check the case filter
26. n location space constraints you can change the direction the door opens This is done according to the customer s needs The qualified technician or customer can do this warnine themselves directly Frame Front Assy Door 6 1 Unplug the power cord 2 Remove the two screws from the door hinge 3 Lift the door to separate it 4 Remove the 16 screws 5 After removing the screw rotate the holder glass the door glass and the Door Glass cover door I by 180 as shown in the figure e Since the holder glass the door glass and the cover door are not caution Completely fixed rotate them holding the lower part so that they are not separated e Work carefully so that the door seal is not removed Holder Glass Seal Door Cover Door l 6 After rotating them by 180 hold them in the position as shown by the figure 7 Assemble the glass holder in the correct direction After the disassembly assemble it by rotating it by 180 16_ installing your dryer 8 Fasten the 16 screws in the correct positions 9 Note that two of the screws have a different length from the others Use the longer screws for the door lever 10 Move the position of the screw at the back of the door hinge Y3Add YNOA ONITIVLSNI LO 11 Fasten the screw in the bottom hole 12 Remove the two screws holding the front frame at the left 13 Remove the two screws holding
27. nd cleaning CLEANING THE CONDENSER ASSEMBLY 1 Open the condenser compartment cover 2 Unlock the fixer condenser 3 Remove the condenser 4 Clean the condenser completely under the tap letting water to flow through e Since the drying performance may be degraded if you do not clean the condenser after a specified period of use clean the condenser at the specified cleaning interval e Clean it once a month e When assembling the condenser after cleaning it make sure to that the fixer condenser is set to the lock position CAUTION 26_ care and cleaning special launcary tps SPECIAL LAUNDRY TIPS Please follow the care label or manufacturer s instructions for drying special items If care label instructions are not available use the following information as a guide Bedspreads amp Comforters Follow the care label instructions or dry on the Cotton cupboard and High temperature Make sure the item is thoroughly dry before using or storing May require repositioning to ensure even drying Blankets Use Cotton cupboard and dry only one blanket at a time for best tumbling action Make sure the item is thoroughly dry before using or storing Cloth Nappies Use the Cotton cupboard and the High temperature settings for soft fluffy diapers Down filled Items jackets sleeping bags comforters etc Use the Cotto
28. ng to the moisture and weight of the items Start dryer It may be necessary to reset the timer if a longer drying time is needed e f do not select Time Dry cycle Rack Dry function is not selected Press the Start Pause button SUGGESTED ITEMS REMARKS MAX 1 5kg Washable sweaters block to shape and lay flat on rack Stuffed toys When drying the laundry using the Rack fold and place cotton or polyester fiberfilled the clothes on the Rack to prevent the clothing from becoming wrinkled Stuffed toys foam or rubber filled Foam rubber pillows Sneakers To dry sports shoes place the shoes on the Rack so that the soles of the shoes are facing downwards Drying foam rubber plastic or rubber on a heat setting may cause damage to the items warnine and lead to a fire hazard CAUTION Since damage may result when drying shoes use the Rack Dry course to dry shoes 22_ operating Instructions tips LOAD THE DRYER PROPERLY Place only one washload in your dryer at a time Mixed loads of heavy and lightweight fabrics will dry differently which may result in lightweight fabrics being dry while heavy fabrics remain damp at the end of a drying cycle Add one or more similar ttems to your dryer when only one or two articles of clothing need drying This
29. or a long time the drying performance may be degraded CAUTION CONTROL PANEL Clean with a soft damp clothes Do not use abrasive substances Do not spray cleaners directly on the panel The control panel finish may be damaged by some laundry pre treatment soil and stain remover products Apply such products away from your dryer and wipe up any spills or overspray immediately TUMBLER Remove any stains such as crayon ink or fabric dye from new items such as towels or jeans with an all purpose cleaner Tumble old towels or rags to remove any excess stain or cleaning substance Once these steps are followed stains may still be visible but should not transfer to subsequent loads STAINLESS STEEL TUMBLER To clean the stainless steel tumbler use a damp cloth with a mild non abrasive cleaner suitable for stainless steel surfaces Remove the cleaner residue and dry with a clean cloth DRYER EXTERIOR The entire dryer has a high gloss finish Clean with a soft damp cloth Do not use abrasive substances Protect the surface from sharp objects as they may scratch or damage the finish Do not place any heavy or sharp objects or a detergent box on the dryer Keep them on the purchased pedestal or in a separate storage box 24_ care and cleaning DUMPING CONDENSED WATER amp 1 Pull the water tank forwards to separate it Water Tank When removing the Water tank from the product hold it caution
30. r and resulting in injury Dry the laundry only after it was spun by an appropriate washing machine Do not dry unwashed items in the tumble dryer Do not drink the condensed water Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated Do not dry laundry contaminated by inflammable materials such as gasoline kerosene benzene thinner alcohol etc This may result in electric shock fire or explosion Do not let pets chew or play with the dryer This may result in electric shock or injury When disposing of the product separate the door and the power cord before disposing of the product Failing to do so may result in damage to the power code or an injury Do not touch the power plug with wet hands This may result in electric shock Do not repair replace or attempt to service any part of the appliance unless specifically recommended in the user repair instructions You must also have the skills necessary to service this appliance N Do not attempt to repair disassemble or modify the appliance yourself Do not use any fuse such as cooper steel wire etc other than the standard fuse When repairing or reinstalling the appliance is required contact your nearest service center Failure to do so may result in electric shock fire problems with the product or injury 6_ safety information AN CAUTION SIGNS FOR USING
31. rom the rearleft Align left bracket holes with top cap screw hole on rear left of the unit and replace screw IZ Leave screw loose so dryer hole alignment will be easier e Repeat the above step with the right side 5 Install dryer and bracket on washer e Lift the dryer on top of the washer Protect the washer wanna CONTO panel with cardboard or other protection Be sure to lift the dryer high enough to clear the washer control panel Personal Injury More than two people are recommended to lift the dryer into position because of its weight and size Failure to do so could result in injury e Align the holes in the bracket with the holes in the back of the dryer Using a Phillios screwdriver attach the M4x12 tapping screws e Tighten the washer bracket screws then tighten all stacking kit screws 6 Finalise the installation e Refer to the washer Installation Instructions to waana Complete the washer installation e Refer to the dryer Installation Instructions to complete the dryer installation e Carefully slide or walk the stacked washer and dryer into place Use felt pads or other sliding device to assist moving and to protect flooring Do not push on the dryer once installed to top of the washer Pushing on the dryer may result in pinched fingers installing your dryer _15 installing your dryer DOOR REVERSAL Depending on your requirements installatio
32. s shirts etc e xtra Dry Use for heavy duty fabrics or items that should be very dry such as jeans and towels e Cupboard Dry Use this cycle to dry loads such as cotton underwear and linen NOT appropriate for jeans e lron Dry Finishes the dry cycle in a moist state appropriate for Ironing Synthetics For averagely or lightly soiled blouses shirts etc made of polyester diolen trevira polyamide perlon nylon or other similar blends 2 Cycle Selector e Extra Dry Use for heavy duty fabrics or items that should be very dry such as jeans and towels e Cupboard Dry Use this cycle to dry loads such as shirts blouses bed linen and table linen NOT appropriate for jeans e ron Dry Finishes the dry cycle in a moist state appropriate for Ironing Quick Dry Provides a 29 minutes drying time and high temperature level is automatically selected Time Dry Time Dry allows you to select the desired cycle time and simultaneously it is possible to select the temperature level Turn the cycle selector dial to Time Dry then press Time Button to set the drying time Press the Time button repeatedly to scroll through the time settings The drying time increase in every 10 minutes up to 90 minutes Warm Air For small items pre dried laundry and normal fabrics using low temperature in 20 minutes Cool Air For all fabrics to need freshing tumbles without heating 18_ operating Instructions tips Wool For mach
33. s at the same time for 3 seconds ie C 20_ operating Instructions tips MY CYCLE Lets you activate your customised cycle that includes Dryness drying temperature and time option By pushing the My Cycle button you activate the settings used during the previous My Cycle mode Default Normal Cycle If My Cycle mode is activated the My Cycle indicator will be lit You can select all options in My Cycle mode as follows 1 2 IZ Each cycle has certain default options that are automatically set 3 4 You can change the My Cycle settings by repeating the same process above DELAY END Select cycle using the Cycle Selector dial After cycle selection set each option To see these default options go to page 33 Then you can start My Cycle by pushing the Start Pause button in My Cycle mode The cycle and options you select will be displayed the next time you choose My Cycle The last used setting will be displayed the next time you choose My Cycle SdIL SNOILONYLSNI ONILVY3dO Z0 You can set the dryer to finish your drying cycle automatically at a later time choosing a delay of between 4 to 19 hours in 1 hour increments The hour displayed indicates the time at which the dry will be finished 1 2 3 4 Manually or automatically set your drying machine according to the type of laundry you are drying Press the Delay End button repeatedly until the required delay time is set If the delay time
34. the holder lever at the left 14 Now move to the right side of the product and fasten the two screws holding the front frame and the two screws holding the lever holder 15 Align the door with the fixing holes 16 Fasten the two screws holding the door hinge _ Inside the drum IZ You can restore the direction the door opens by following the procedures above if necessary installing your dryer _17 operating Instructions tlos OVERVIEW OF THE CONTROL PANEL Cotton Synthetics 4 tra D z extra D ua Mixed Power AMGEN D Xtra ary Cycle Load Bell Cupboard Dry Du Cupboard Dry _ p KARI I O BS e on l ml l pp eu Fen Dy wo og PBS Se 76 Ea Ea Wool G Quick Dry Start Pause Ultra Delicate Time Dry Temp Time Rack Wrinkle Dry Prevent Freshen Up Warm Air Gi ot ar ou Ue one P 0 GOO 0 OH 0 amp Digital Graphic Displays the remaining drying cycle time all cycle information and error Display messages To select a cycle rotate the Cycle Selector dial to the desired cycle Cottons Cupboard Dry gt Extra Dry gt Synthetics Extra Dry gt Cupboard Dry gt Iron Dry gt Quick Dry gt Time Dry gt Warm Air gt Cool Air gt Sports Wear gt Freshen Up gt Ultra Delicate gt Wool gt Cotton Iron gt Cupboard Dry Cotton For averagely or lightly soiled cottons bed linen table linen underwear towel
35. ubt as to whether your dryer is properly grounded Do not modify the plug provided with your dryer if it doesn t fit the outlet have a proper outlet installed by a qualified electrician e To prevent unnecessary risk of fire electrical shock or personal injury all wiring and grounding must be done in accordance with local codes or in the absence of local codes It is your responsibility to provide adequate electrical services for your dryer GROUNDING Your dryer must be grounded If your dryer malfunctions or breaks down grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current Your dryer comes with a power cord having a three prong grounding plug for use in a properly installed and grounded outlet Never connect the ground wire to plastic plumbing lines gas lines or hot water pipes Improperly connecting the equipment grounding conductor can result electrical shock Check with a qualified electrician or serviceman if you are unsure if the dryer is properly grounded Do not modify the plug provided with the dryer If it does not fit the outlet have a proper outlet installed by a qualified electrician If the product is not grounded there is a danger of fire or electric shock WARNING installing your dryer _11 dJAHYGa YNOA ONITIVLSNI LO installing your dryer INSTALLATION SIDE BY SIDE For proper installation we recommend that you hire a profession
36. with the surrounding room air This is normal as the dryer draws the air from the room heats it pulls it through the tumbler and exhausts it outside When these odors linger in the air ventilate the room completely before using the dryer Shuts off before load is dry Dryer load is too small Add more items or a few towels and restart the cycle Dryer load is too large Remove some items and restart the dryer 28_ troubleshooting PROBLEM SOLUTION Lint on clothes e Make sure the lint filter is cleaned before every load With some loads that produce high amounts of lint tt may be necessary to clean the filter case during the cycle e Some fabrics are lint producers for example a fuzzy white cotton towel and they should be dried separately from clothes that are lint trappers for example a pair of black linen pants e Divide larger loads into smaller loads for drying e Check pockets thoroughly before drying and drying clothes Garments still wrinkled after Small loads of 1 to 4 items work best Wrinkle prevent e Load fewer garments Load similar type garments Odours remain in clothing after Refresh ONILOOHSATENOUL SO Fabrics containing strong odors should be washed troubleshooting _29 troublesnoocting INFORMATION CODES Information codes may be displayed to help you better understand what is occurring with your Dryer ERROR DISPLAY MEANING SOLUTION
Download Pdf Manuals
Related Search