Home

Samsung UE32D5000 LED TV

1. works if the subtitles are the same file name as the video English Category Operation Videos Music Photos Start Slide Show You can start or pause a Slide J Pause Slide Show Show You can select the slide show li h N p speed during the slide show v You can on off background Background Music music when watching a Slide V Show English Category Operation Videos Music Photos _ You can select background Background Music l J music when watching a Slide v Setting Show You can zoom into images in full Zoom 9 v screen mode You can rotate images in full Rotate 9 4 screen mode You can see detailed information Information V vV about the played file English What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it For the method of connecting external devices refer to the supported user manual NOTE lt Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack gt on your TV and the Digital Audio Input on the Home Theatre English When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the H
2. If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto tuning Many HD channels are up scaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is Compression of video contents may cause picture distorted macroblock distortion especially in fast moving pictures such as error small block sports and action movies dots pixelization Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may Cause noise in picture on analogue and digital TV Colour is wrong or f you re using a component connection make sure Missing the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or brightness There is a dotted line on the edge of the screen The picture is black and white Adjust the Picture options in the TV menu go to Picture Mode Colour Brightness Sharpness Adjust Energy Saving option in the TV menu
3. Picture Picture Mode ENTER C E Picture Mode Select your preferred picture type When connecting a PC you can only make changes to the Entertain and Standard Dynamic Suitable for a bright room Standard Suitable for a normal environment Natural SERS iene Suitable for reducing eye strain Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games It is only available when connecting a PC English LJ Adjusting Picture Settings ia Samsu ng MagicAngle for LED 4 series 19 inches 5 series 22 27 inches MENU Ol Picture Samsung MagicAngle ENTERC Adjust screen viewing Angle to optimize screen quality according to your viewing position e Samsung MagicAngle When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front Off Select when viewing from the front position Lean Back Mode Select when viewing from a slightly lower position Standing Mode Select when viewing from the upper position e Mode Adjust screen viewing angle When Samsung MagicAngle is set to Lean Back Mode or Standing Mode Gamma is not available English E Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control MENU I Picture Backlight ENTERC
4. 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock NOTE These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately e The location of the Kensington slot may be different depending on the TV P model English lt LI Connections Common Interface Slot Attaching the Cl Card Adaptor l lt IV Rear gt Attach the adapter as shown in the right To connect the CI CARD Adapter follow these steps Make sure that you attach the adaptor before you mount the TV on a wall 1 Insert the Cl CARD Adapter into the two holes on the product Please find the two holes on the rear of the TV The two holes are beside the COMMON INTERFACE port Press it firmly at center of adapter to ensure it is fully lock 2 Connect the Cl CARD Adapter into the COMMON INTERFACE port 3 Insert the Cl or Cl CARD English O O lt O Z Z m D gt O Q To watch paid channels the Cl or Cl CARD must be inserted e f you do not insert the Cl or Cl CARD Ai Peas some channels will display the message Scrambled Signal The pairing information containing a Vaaia telephone number the Cl or Cl CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your
5. go to MENU System Eco Solution Energy Saving Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture If the picture size is set to Screen Fit change it to 16 9 Change cable satellite box resolution If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed Sound Quality There is no sound or the sound is too low at maximum volume e f connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080 or 720p First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may caused by the source or signal e Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV The picture is good but there is no sound Set the Speaker Select option to TV Speaker in the sound menu If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV If you are using an external device check the device s audio output option ex you may need to change your cable box s audi
6. Inthe pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed English How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 2 in the How to set up automatically procedure 2 Select the IP Settings on network test screen 3 Set IP Mode to Manual 4 Press the W button on your remote inhlege Manual r to go to the first entry field AAA ae Subnet Mask gH S OK Move Enter Return Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another When done select the OK The network connection screen appears and network setting is done English Q Connecting to a Wireless Network To connect your TV to your network wireless you need a wireless router or modem and a Samsung Wireless LAN Adapter WISOSABGN WISOSABGN2 WIS1OABGN which you connect to your TV s back or side panel USB port See the illustration below Wireless IP sharer Wireless router having DHCP Server TV Side Panel The LAN Port on the Wall i lt l ley Samsung Wireless or 5 ke f LAN Adapter LAN Cable Samsung s Wireless LAN adapter is sold separately and is offered by sel
7. Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode English If your router modem or device is not certified it may not connect to the TV via the Samsung Wireless LAN Adapter Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter Connection Methods You can setup the wireless network connection on five ways Auto Setup Using the Auto Network Search function Manual Setup WPS PBC One Foot Connection Ad hoc The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied English Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter In such a case establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference Connect using the USB right angle adapter To connect the Samsung Wireless LAN Adapter using the USB right angle adapter follow these steps lt 1 Connect the USB right angle adapter to the Samsung Wireless LAN Adapter 2 Connect the other end of the right angle adapter to the USB port Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable follow the
8. any button except volume button to turn on the screen e Eco Sensor Off On SRS tenes To enhance your power savings the picture settings will automatically adapt to the light in the room gt If you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco sensor is On the minimum screen brightness can be adjusted manually If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity English e No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal Disabled when the PC is in power saving mode e Auto Power Off Off On The TV will be automatically turned off when no user operation is received for 4 hours Q Other Features MENU I System ENTER C E Language Menu Language Set the menu language Teletext Language depending on the country Set a desired language for teletext English is the default in cases where the selected language is unavailable in the broadcast English e Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected Primary Teletext Language and Secondary Telet
9. Edit Channel Number function e Delete You can delete a channel to display the channels you want Deselect All Deselect all the selected channels You can only select Deselect All when one or more channels are selected e Select All Select all the channels in the channel list English LJ Retuning Channels MENU I gt Channel gt ENTER C E Antenna Air Cable Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the TV i e an Air or Cable system English E Country depending on the country The PIN input screen appears Enter your 4 digit PIN number e Digital Channel Change the country for digital channels Analogue Channel Change the country for analogue channels E Auto Tuning depending on the country Scans for a channel automatically and stores in the TV Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked the PIN inout window appears Auto Tuning Air Cable Select the antenna source to memorise Digital amp Analogue Digital Analogue Select the channel source to memorise English When Antenna Source is set to Air or Cable When selecting Cable Digital amp Analogue or Digital Provide a value to scan for cable channels Search Mode Full Network Quick Scans for all channels with active broadcast s
10. Sleep Timer select Off English LI Setting the On Off Timer MENU J System Time On Timer lt or gt Off Timer ENTERL On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can be made You must set the clock first o e e ne nnnm Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day Adjust lt gt Move Enter 5 Return you want to activate the timer The v mark indicates the day you ve selected On Time Volume On Time Set the hour and minute Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is p turned on automatically English NOTE f there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly When there is only one photo file in the USB device the Slide Show will not play lf a folder name is too long the folder cannot be selected e Each USB you use
11. and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB English E Speaker Settings e Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker e TV Speaker On External Speaker On If there is no video signal both speakers will be mute e Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night To use the volume control on the source device connected to the TV set Auto Volume to Off on the TV Otherwise a change to the volume control of the source device may not be applied English E Reset Sound OK Cancel Reset all sound settings to the factory defaults LJ Selecting the Sound Mode DUAL I Il ENTERC When you set to Dual l ll the current sound mode is displ
12. is assigned its own folder When using more than one of the same type of USB make sure the folders P assigned to each USB have different names t is recommended that you use a USB memory stick and a multi card reader when using On Timer e The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized English Off Timer 1 Off Timer 2 Off Timer 3 Three different off timer settings can be setup made You must set the clock first once p EENEN ENEE E Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day you ve selected 4 gt Move Adjust C Enter Return Off Time Set the hour and minute 2 Locking Programme MENU I System Security ENTERC WE Security The PIN input screen appears before the setup screen Enter your 4 digit PIN Change the PIN using the Change PIN option e Channel Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme lt Only available when the Input source is set to TV English e Program Rating Lock depending on the country Prevent unauthorized users such as children from watching unsuitable programme w
13. of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics English 2 Setting the Time MENU System Time ENTER G E Time The current time will appear every time you press the INFO button Clock Setting the clock is for using various timer features of the TV If you disconnect the power cord you have to set the clock again Clock Mode Set up the current time manually or automatically Auto Set the current time automatically using the time from a digital channel The antenna must be connected in order to set the time automatically English Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Day Month Year Hour and Minute manually Available only wnen Clock Mode is set to Manual Time Zone depending on the country Select your time zone This function is only available when the Clock Mode is set to Auto When selecting Manual in Time Zone GMT and DST will be activated gt LJ Using the Sleep Timer MENU I System Time Sleep Timer ENTER C e Sleep Timer NB Automatically shuts off the TV after a preset period of time 80 60 90 120 150 and 180 minutes To cancel
14. wireless router within 1foot 25cm from samsung TV If your wireless router does not support One Foot Connection you must connect using one of the other methods You can check for equipment that supports One Foot Connection on www samsung com How to set up using One Foot Connection Turn on the power of wireless router and TV gt 1 Goto Network Settings screen To enter it follow the directions of Network Settings English Select the One Foot Connection Select a network connection type Place the wireless router in parallel with the Samsung Wireless LAN Adapter giving a gap no larger CE than 25cm WPS PBC Wait until the connection is drt automatically established Move Enter D Return The network connection screen appears and network setting is done Place the wireless router in a desired location Z If the wireless router settings change or you install a new wireless router you must perform the One Foot Connection procedure again beginning from Step 1 E Network Setup Ad Hoc You can connect to a mobile device supporting Ad hoc without an wireless router through the Samsung Wireless LAN Adapter When connecting mobile device you can use files on device or connect internet using AllShare or Multimedia function How to connect to new Ad hoc 1 Goto Network Settings screen To enter it follow the directions of Network Settings Select the Wireless general When select the Ad ho
15. work Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet does not work in certain situations Searching channels operating My Downloads or Plug amp Play initial setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on English Problem Possible Solution want to start Anynet want to exit Anynet Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the System menu Press the TOOLS button to display the Anynet menu and select a menu you want Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press Y CH A button to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected English Problem Possible Solution The message e You cannot use the remote control when you are Connecting to Anynet configuring Anynet or switching to a view mode device appears on the m Use the remote control when the Anynet setting or screen switching to view mode is complete The Anynet device does You cannot use the play function when Plug amp Play not play initial Setup is in
16. 0 6 30 8 ASP MPEG2 1920 x 1080 24 25 30 30 VRO AC3 MPEG omg LPCM VOB MPEG1 1920x 1080 24 25 30 30 English F t Bit rat File Extention Container Video Codec Resolution SE Milas Audio Codec fps Mbps MPEG1 1920 x 1080 24 25 30 30 mpg AC3 MPEG PS MPEG2 1920 x 1080 24 25 30 30 mpeg LPCM AAC H 264 1920 x 1080 6 30 25 MPEG2 1920 x 1080 24 25 30 30 tS AC3 AAC tp TS H 264 1920 x 1080 6 30 25 MP8 DD trp HE AAC VC1 1920 x 1080 6 30 25 English gt Other Restrictions NOTE Video content will not play or not play correctly if there is an error in the content or the container e Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the table above e f the Index Table is in error the Seek Jump function is not supported e When playing the video through network it may not work depending on the network status When you play video over a network connection the video may not be played smoothly CUERE ES The menu can be displayed late if the video is over 10Mbpsibit rate Some USB digital camera devices may not be compatible with the player e Video content can not be played if there are many contents in one file English Video Decoder Audio Decoder Supports up to H 264 Level 4 1 Supports up to WMA 7 8 9 STD 9 PRO H 264 FMO AS
17. Cable Set too Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection The TV is not receiving Make sure the Antenna cable is connected securely all channels Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored e Verify the Antenna is positioned correctly The picture is e Compression of video contents may cause picture distorted macro block distortion especially on fast moving pictures such as error small block sports and action movies dots pPixeizaton e A low signal can cause picture distortion This is not a TV issue PC Connection A Mode Not e Set your PC s output resolution so it matches the Supported message resolutions supported by the TV appears PC is always shown This is normal PC is always shown on the source list on the source list regardless of whether a PC is connected even if a PC is not connected The video is OK but e lf you are using a HDMI
18. E MANUAL imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Channel Setting Using the INFO button Now amp Next guide Using Channel menu Watch TV Schedule Manager Channel List Channel Manager Retuning Channels Basic Features Picture Menu e Sound Menu oF 44 Preference Features e Network egispkerscnccncve7lonisenics e System Menu e Support Menu Advanced Features e My Contents e Anynet e AllShare EOE 56 84 108 116 143 157 Other Information e Analogue Channel Teletext Feature e Anti theft Kensington Lock e Connections Common Interface Slot e Troubleshooting e Licence 161 165 167 170 187 LJ Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time Scroll lt gt to view information for a desired programme while watching the current channel Scroll A V to view information for other channels If you want to move to the currently selected channel press the ENTERL button gt 18 07 Fri 5 Aug Major League Baseball DTV Air Dolby Digital 576i 16 9 cols English Sports 1 Major League Baseball MLB is the hi
19. Interface e CI Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off 1 2 Purchase a Cl CAM module at your nearest dealer or by phone Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow Insert the CAM with the Cl or CI CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot Check if you can see a picture on a scrambled signal channel English HM Network Remote Control Q meBkersciccncta onisenss Turn on off or give permission to Samsung mobile phones devices to connect with and control the TV You must have a Samsung Mobile phone device which supports Network Remote Control For more details refer to each device s manual English LJ Support Menu MENU 10 Support e Manual ENTERC E e Manual You can read the introduction and instructions about the TV features stored in your TV For the detailed information about e Manual Screen refer to How to view the e Manual in User Manual English E Self Diagnosis Self Diagnosis might take few seconds this is part of the normal operation of the TV e Picture Test Yes No Use to check for picture problems
20. NOTE n analogue TV Ext AV modes of the PAL system the Tint G R function is not available e When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness Settings can be adjusted and stored for each external device connected gt to the TV M Screen Adjustment Set the various picture options such as picture size and aspect ratio e Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 Adjusts the Position by using A VW buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size Adjusts the Zoom or Position by using A V button English 4 3 Sets the picture to basic 4 3 mode Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080 1080p or Component 1080 1080p signals are inputted Smart View QRS iene Reduces original screen by 50 Smart View2 CEEE Reduces original screen by 25 NOTE e Smart View1 is enabled only in HDMI mode e Smart View2 is enable
21. O RS VC1 SP MP AP L4 WMA Lossless Voice Lossless Voice is and AVCHD are not supported not supported XVID MPEG4 SP ASP WMA sampling rate 22050 Hz mono is not Below 1280 x 720 60 frame max supported Above 1280 x 720 30 frame max GMC is not supported English E Music Playing Music 1 Press the lt P A V button to select the desired Music in the file list cai a aren Now I m That Bitch Livvi Franc 2 Press the ENTERC button or SR gt Play button E You can use lt lt REW Bis zg and gt gt FF buttons during i playback C Play 4b Pages 1 Tools 5D Return English Only displays the files with MPS file extension Other file extensions are not displayed even if they are saved on the same USB device If the sound Is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Playing the selected music 1 Press the B Edit Mode button 2 Select the desired music The check box appears to the left of the selected files 3 Press the TOOLS button and select Play Selected Contents You can select or deselect all music pressing the Select All Deselect All English E Photos Viewing a Photo or Slide Show 1 Press the lt A V button to select the desired photo in the file list 2 Press the ENTERLC button e When a selected photo is displayed press the ENTERL4 butto
22. USB device that requires high power more than 500mA or 5V may not be supported p English f an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction lf the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV English If a USB extension cable is used the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when My Downloads is run use the Empty the Recycle Bin function on the PC to permanently delete the file My Downloads only supports sequential joeg format The scene search and thumbnail functions are not supported in the Videos If the number of files and folders saved on a USB storage device is approximately over 4000 the files and folders may not appear and some folders may not be opened English Q Connecting to the PC through network COARDE EEAS You can play pictures music and videos saved on your PC through a network connection in the My Downloads mode over your TV If you want to use My Do
23. Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours B Blue Ch Mode Select the type of channels you want to display on the Channel List window All TV Radio Data Other Analogue Favourites 1 5 Information Displays details of the selected programme Page Move to previous or next page L Watch Schedule When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTERL button again and select Cancel Schedules English E Schedule Manager Cancel or set the Timer Viewing to display the channel you want at the intended time Using Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the ENTERL button to add programme to schedule manually 2 Press the lt P A button to set the Antenna Channel Repeat Date Start Time gt e Antenna Select the desired broadcasting signal Channel Select the desired channel English Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want The VW mark indicates the day you ve selected e Date You can set the desired date It is available when you select Once in Repeat e Start Time You can set the sta
24. a wired network English 2 Screen Display Move to the desired file using the lt A buttons and then press the ENTERLC4 or gt Play button The file is played My Downloads screen may differ depending on the way to enter the screen Information ne o You can ascertain the Eora k asi selected device name E oe contents mode folder E English Movie UP F Now l m That Bitch Saa file name page and Nov 102010 File List Section sorting list E ie ee A You can confirm the m Q A Sucker For Your Sound files and groups that are sorted by category Contents mode Device name E Operation Buttons You can select the desired J Yellow Edit Mode Selects the desired music The check Contents mode or Device name box is shown in the screen to check the music you want It is only available in Music Page Move to next or previous page a Tools Displays the option menu 5 Return Move to the previous step English E Videos Playing Video 1 Press the lt A V button to select the desired video in the file list 2 Press the ENTERC button or gt Play button The selected file name is displayed on the top with its playing time 4 gt Jump J Tools DS Return If video time information is unknown play time and progress bar are not displayed During video playback you can search using lt and gt button You can use lt lt REW and gt
25. ayed on the screen AudioType Duall Default O mw Mo Automatic change Dual Dual li Dual ero wo Automatic change NICAM Stereo Dual Dual s Dual Il x If the stereo signal is weak and an automatic switching occurs then switch to the mono Only activated in stereo sound signal Only available when the Source is set to TV Engish L Setting the Network CHENE ESZA Network Settings MENU ID Network Network Settings ENTER CC Set the network connection to use AllShare and perform software upgrade Network Status MENU l Network Network Status ENTER C You can check the current network and Internet status AllShare Settings MENU I Network AllShare Settings ENTERL Selects whether to use media functions on the network For details on set up options refer to the AllShare instructions 2 Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable See the diagram below TV Rear Panel External Modem ADSL VDSL Cable TV The Modem Port on the Wall LAN Cable Modem Cable You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use LAN cable for the connection See the diagram bel
26. c the message Ad hoc service supports a direct connection with Wi Fi compatible devices like a cell phone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed 4 Inout the generated Network Name SSID and Security Key into the device you want to connect If network does not operate normally check the Network Name SSID and Security key again An incorrect Security key may cause a malfunction If a device is connected once it is displayed in Network Setting list When you connect it again you can find it in network setting list If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because
27. channel you select Displays details of the selected programme e Page Move to next or previous page Channel Status Display Icons Icon Operations AN An analogue channel A reserved programme e A locked channel English How to use Timer Viewing in Channel List digital channels only When you set the Timer Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desired digital channel Press the f Programme View button Press the A Y buttons to select the desired programme then press the ENTERL Information or INFO button Select Timer Viewing then press the ENTERL button when done If you want to cancel Timer Viewing follow steps 1 through 3 Select Cancel Schedules y English E Channel Manager You can edit the channel to your preference e Channels Shows the channel Channel Manag list according to the channel type e lt 7 Favourites 1 5 Shows favourite channels Selected item 4 BBC ONE BBC ONE Using the colour buttons with the _ T Channel Manager ie o E Red Antenna Switches to e ae Air or Cable It may differ depending on the model e E Blue Sorting Changes the list ordered by number or name English Channel Status Display Icons Icon Operations AN An analogue channel v A channel selected 4 A channel set as a favourite A lo
28. cked channel x Displays the Channel Manager option menu English Channel Manager Option Menu Set each channel using the Channel Manager menu options Watch Add to Favourites Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings Watch Watch the selected channel e Add to Favourites Edit Favourites Set channels you watch frequently as favourites Add or Delete the selected channel in Favourites 1 5 1 Select the Add to Favourites Edit Favourites then press the ENTER L button If the channel is already added to favourite channel Edit Favourites will be shown 2 Press the ENTER LC button to select Favourites 1 5 then press the OK button gt One favourite channel can be added in several of Favourites among Favourites 1 5 Lock Unlock Lock a channel so that the channel cannot be selected and viewed NOTE e This function is available only when the Channel Lock is set to On e The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option e Edit Channel Name analogue channels only Assign your own channel name e Edit Channel Number Edit the number by pressing the number buttons desired lt Some area may not be able to support Edit Channel Name and
29. connection check the audio there is no audio output setting on your PC Network Connection Eui aD ERAS The wireless network Samsung Wireless USB dongle is required to use a connection failed wireless network Make sure the Network Connection is set to Wireless Make sure the TV is connected to a wireless IP sharer Router Software Upgrade e ry Network Settings in Network menu over the network fails If you have latest SW version SW upgrade will not proceed Others The picture will not HD channels will have black bars on either side of the display in full screen screen when displaying up scaled SD 4 3 contents e Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV e Adjust the picture size options on your external device or TV to full screen The remote control e Replace the remote control batteries with the poles does not work in the right direction e Clean the sensor s transmission window on the remote e ry pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control doesn t turn the TV on or off or adjust the volume A Mode Not Supported message appears There is a plastic smell from the TV The TV Signal Information is unavailable in the Self Diagnosis Test menu Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual fo
30. d only in DTV and HDMI modes The picture size can vary depending on the input resolution when content is played using Videos under My Downloads English e Position Adjust the picture position It is only available in Screen Fit or Wide Zoom e Zoom Position Adjust the picture position It is only available in Zoom NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080 1080p mode you may need to centre the picture 1 Press the a or w button to select Position 2 Press the ENTERL4 button 3 Pressthe a w 4 or gt button to move the picture e Depending on the input source the picture size options may vary f you want to reset the position you adjusted select Reset in the Position screen The picture will be set to its default position English The available items may differ depending on the selected mode e When connecting a PC only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the TV e f you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size gt Eng
31. depending on the model the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade TV Side Panel e By Online GRRE ier Upgrade the software using the Internet First configure your network For detailed procedures on using the Network Setup refer to the Network Connection instructions If the internet connection doesn t operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade e By Channel Upgrade the software using the broadcasting signal If the function is selected during the software transmission period software will be automatically searched and downloaded The time required to download the software is determined by the signal status English e Alternative Software backup If there is an issue with the new firmware and it is affecting operation you can change the software to the previous version If the software was changed existing software is displayed e Standby Mode Upgrade Off 1 hour later 2 hours later 00 00 02 00 12 00 14 00 A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the product This phenomenon may continue for more than 1 hour until the so
32. e Sound Test Yes No Use the built in melody sound to check for sound problems If you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu gt The melody will be heard during the test even if Soeaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Signal Information digital channels only HDTV channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength Troubleshooting If the TV seems to have a problem refer to this description If none of these troubleshooting tips apply contact the Samsung customer service centre English E Software Upgrade Software Upgrade can be performed by downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV Software is represented as Year Month Day_Version Current Version 2011 01 18 000001 Move CC Enter Return It may differ depending on the model Installing the Latest Version e By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please n be careful not to disconnect the power mO or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing It may differ
33. e pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries Motion Lighting Off On Reduce power consumption by brightness control adapted motion LED Motion Plus Off On QS RRS Removes drag from fast scenes with a lot of movement to provide a clear picture E Picture Options MENU I Picture Picture Options ENTER CC When connecting a PC you can only make changes to the Colour Tone Colour Tone Standard gt e Colour Tone Cool Standard Digital hloise tiite i Auto Warm1 Warm 2 so Noise sain suo Warm1 or Warm2 will be deactivated when the picture mode is Dynamic settings can be adjusted and er Retr stored for each external device connected to an input on the TV Normal Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength Only available for analogue channels When the INFO button is pressed the signal strength bar is displayed gt When bar is green you are receiving the best possible signal e MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture
34. ect retailers and Ecommerce sites Samsung s Wireless LAN adapter supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 11n When you play video over a network connection the video may not be played smoothly NOTE You must use the Samsung Wireless LAN Adapter WISOSABGN WISOSABGN2 WIS1OABGN to use a wireless network Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers and Ecommerce sites English Jo use a wireless network your TV must be connected to a wireless IP sharer either a router or a modem If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure lf you apply a security system other than the systems listed below it will not work with the TV be English e f HIGH PURE THROUGHPUT Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed for your wireless router Samsung TVs will not Support a connection in compliance with new Wi Fi certification specifications e f your wireless router supports WPS Wi Fi Protected Setup you can connect to the network via PBC
35. er Audio Description Off On Turn the audio description function on or off Volume Adjust the audio description volume English E Additional Settings e DTV Audio Level MPEG HE AAC digital channels only This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OaB To increase or decrease the volume adjust between the range O and 10 respectively English e SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio outout SPDIF format The available Digital Audio output SPDIF format may differ depending on the input SOUICE By connecting to 5 1ch speakers in a Dolby Digital setup maximize your interactive 3D sound experience Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such gt as an AV receiver Oms 250ms English e Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound select Line to obtain dynamic sound and RF to reduce the difference between loud
36. ext Language may not be supported in some locations E Subtitle Use this menu to set the Subtitle mode Subtitle Off On Switches subtitles on or off Subtitle Mode Normal Hearing Impaired Sets the subtitle mode Subtitle Language Sets the subtitle language If the programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected lt English is the default in cases where the selected language is unavailable gt in the broadcast E Digital Text Disable Enable UK only If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includesdata linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demana ITV Interactive TV EC Electronic Commerce gt teleeducation tele conferencing digital libraries and network games English E Auto Protection Time e Auto Protection Time Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the sc
37. fer Function technology English e SRS TruDialog Off On standard sound mode only This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly Equalizer Use Equalizer to customize sound setting for each speaker Balance Adjusts the balance between the right and left speaker 100Hz 300HZz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equalizer to its default settings lf Speaker Select is set to External Speaker Sound Effect is disabled English E Broadcast Audio Options Audio Language digital channels only Change the default value for audio languages The available language may differ depending on the broadcast Audio Format digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable English e Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcast
38. ftware upgrade is complete English E Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software E Contents Home You can enjoy useful and various contents English LJ Using the My Downloads Enjoy photos music and movie files saved on a USB Mass Storage Class MSC device and your PC 1 Press the CONTENT button to owni o Adai select My Downloads Photos 2 Press A V button to select desired Music menu Videos Photos Music then press the ENTERL button Source Sog Watch TV A1 It may differ depending on the model LJ Connecting a USB Device 1 2 Turn on your TV Connect a USB device containing photo music and movie files to the USB jack on the side of the TV When USB is connected to the TV popup window appears Then you can select New device connected TV Side Panel It may differ depending on the model It might not work properly with unlicenced multimedia files Need to Know List before using My Downloads MTP Media Transfer Protocol is not supported e The file system supports FAT16 FATS2 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e My Downloads only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Exa
39. ghest level of play in profession A Information v It may differ depending on the model English 2 Using Channel menu Watch TV MENU 10 Support Contents Home ENTERC Press the CONTENT button to select Watch TV then select the desired menu Each screen will be displayed E Guide The EPG Electronic Programme Guide information is provided by broadcasters Using programme Schedule Manager schedules provided by broadcasters Channel List Channel Manager you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Using Guide 19 10 Tue 1 Jun DTV Air 3 five Home and Away 19 00 19 30 Drama Dani is devastated when scott makes clear his views on marriage Channel View All Today 19 00 19 30 Discovery American Chopper Tine Team DiscoveryH amp L Tsunami Pri The Curious Dark Angel Fiv five No Information price drop tv No Information QVC No Information R4DTT No Information A Sche Mgr 24 Hours W 24Hours D Ch Mode Information Page Schedule It may differ depending on the model English Soo 6 8G EY Red Sche Mgr Moves to the reserved programmes in Sche Mor E Green 24 Hours Viewing the list of programmes to be broadcasted before 24 hours
40. gt FF buttons during playback In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats Name File extension SAMI SubRip SubViewer Micro DVD English Format XML HTML string based string based string based e Supported Video Formats Frame rate Bit rate File Extention Container Video Codec Resolution Audio Codec fps Mbps DivX 3 11 4 1920 x 1080 6 30 8 x 5 1 6 0 B wy XviD 1920 x 1080 6 30 8 MP3 AC3 i a aa HZB oaeo g 30 og LPCM ADPCM HP DTS Core MPEG4 SP ASP 1920 x 1080 6 30 8 Motion JPEG 640 x 480 6 30 8 English t Bit rat File Extention Container Video Codec Resolution Plaine rate Milas Audio Codec fps Mbps DivX 3 11 4 1920 x 1080 6 30 8 x 5 1 6 0 XviD 1920 x 1080 6 30 8 MP3 AC3 asf ASF H 264 BP MP LPCM ADPCM ii 64 BP MP 4920x1080 6 80 25 HP WMA MPEG4 SP ASP 1920 x 1080 6 30 8 Motion JPEG 640 x 480 6 30 8 Window Media wmv ASF 1920 x 1080 6 30 25 WMA Video v9 English F t Bit rat File Extention Container Video Codec Resolution NSE a Audio Codec fps Mbps H 264 BP MP 1920x1080 6 30 25 HP MP3 ADPCM MPEG4 SP mp4 MP4 1920x1080 6 30 8 xiC ASP XVID 1920x1080 6 30 8 H 264 BP MP 1920x1080 6 30 25 HP ADPCM AAC 3gp 3GPP MPEG4 SP HE AAC 1920x108
41. is used by the broadcasting company the different topics on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press the colour corresponding to the topic of your choice A new colourcoded page is displayed Items can be selected in the same way To display the previous or next page press the corresponding coloured button English The Teletext pages are organized according to six categories Part TT MO Ct Oo gt Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information English 2 Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use Please find a R icon on the rear of the TV A kensington slot is beside the fQ icon The position and colour may differ depending on the model To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair Optional 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable
42. ith a user defined 4 digit PIN code If the selected channel is locked the f symbol will be displayed The items of Program Rating Lock differs depending on the country e Change PIN Change your password required to set up the TV English _ Picture In Picture PIP MENU I gt System gt PIP ENTERC E PIP You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode NOTE For PIP sound refer to the Sound Select instructions If you turn the TV off while watching in PIP mode the PIP window will disappear You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke English PIP settings Main picture Sub picture Component HDMI PC PIP Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen Size Liml _ l Select a size for the sub picture Position Lal 7 F_ k_l Select a position for the sub picture Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Q Economical Solutions MENU I System Eco Solution ENTER C E Eco Solution e Energy Saving Off Low Medium High Picture Off Gai This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press
43. lick the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed English How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 7 in the How to set up automatically procedure Select the IP Settings on network test screen set IP Mode to Manual Press the W button on your remote to go to the first entry field aS a Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another When done select the OK The network connection screen appears and network setting is done English M Network Setup WPS PBC How to set up using WPS PBC If your router has a WPS PBC button follow these steps 1 Goto Network Settings screen To enter it follow the directions of Network Settings Select the WPS PBC 3 Press the WPS PBC button on _ _ your router within 2 minutes Your TV automatically acquires all the network setting values it needs and connects to your network CEGE WPS PBC One Foot Connection 4 The network connection screen appears and network setting is done Move Enter Return Network Setup One Foot Connection The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung
44. lish e PC Screen Adjustment It is available in PC mode Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or VW button to adjust the Vertical Position Press the lt or gt button to adjust the Horizontal Position Image Reset Resets the image to default settings English E Auto Adjustment MENU I Picture Auto Adjustment ENTER C Adjust frequency values positions and fine tune the settings automatically It is available in PC mode Not available when connecting with an HDMI DVI cable Setting Up Your PC Software Based on Windows XP lt Depending on the version of Windows and the video card the actual screens on your P PC may differ in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer English Click on Control Panel on the Windows start menu Click on Appearance and Themes in the Control Panel window and a display dialog box will appear Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box e The correct size setting re
45. marks of DTS Inc Product Includes software DTS Inc All Rights Reserved English DI VX DivX Certified to play DivX video up to HD 1080p including premium content HD ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 English S S e TheaterSound SRS and symbol are trademarks of SRS Labs Inc TheaterSound TheaterSound technology is incorporated under licence from SRS Labs Inc Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu Open Source Licence Notice is written only English English
46. menu may not be available Receiver Sound is played through the receiver p gt English _ Setting Up Anynet MENU l System Anynet HDMI CEC ENTER C Anynet HDMI CEC Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off lf Auto Turn Off is set to Yes running external devices will turn off at the same time as the TV powers off May not be enabled depending on the device nll Switching between Anynet Devices Press the TOOLS button then select Anynet HDMI CEC Anynet devices connected to the TV are listed in Device List If you cannot find a device you want press the E button to refresh the list Select a device and press the ENTERL button You can switch to the selected device Only when you set Anynet HDMI CEC to On in the System menu the Device List menu appears Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation f you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List English LJ Listening through a Receiver You can listen to sound th
47. mples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not gt supported Devices should be connected directly to the TV s USB port Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss English USB HDD is not supported QgRSeRSSreSare Roasts a raenes Connect a USB HDD to the dedicated port USB 1 HDD port Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 153860 x 8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed gt If the files are sorted by Folder View up to 1000 files can be displayed in each folder English e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements f more than 2 PIP devices are connected you can only use one at a time e f more than two MSC devices are connected some of them may not be recognized A
48. n selecting Antenna Cable Frequency Modulation Symbol Rate Analogue Channel Tuning Scans for an analogue channel Press the Ej New button to search the digital channels by adjusting the Programme Colour System Sound System Channel Search Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigned to the position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel English E Edit Channel Number Disable Enable depending on the country Use this to change channel number When channel number is changed channel information is not updated automatically E Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset English E Transfer Channel List depending on the country Imports or exports the channel map You should connect a USB storage to use this function The PIN number input screen appears Enter your 4 digit PIN number Import from USB Import channel list from USB e Export to USB Export channel list to USB English _ Changing the Preset Picture Mode MENU ID
49. n to start the slide show During the slide show all files in the file list will be displayed in order When you press the gt Play button in the file list slide show will be started immediately 4 Pause 4 gt Previous Next 1 Tools DS Return Music files can be automatically played during the Slide Show if the Background Music is set to On My Downloads Additional Functions Videos Music Photos Play Option menu During playing a file press the TOOLS button Category Operation Videos Music Photos You can move the other file Title Search Vv directly You can search the video using lt and gt button at one minute Time Search VY interval or entering the number directly You can play the music Shuffle Mode pay V randomly English Category Operation Videos Music Photos You can play movie and music Repeat Mode p files repeatedly y v You can adjust the picture size to Picture Size i p v your preference Picture Mode You can adjust the picture setting Sound Mode You can adjust the sound setting English lt Category Operation Videos Music Photos You can enjoy video in one of supported languages as required The function is only oume Language enabled when stream type files M which support multiple audio formats are played You can play the video with Subtitle Setting Subtitles This function only Y
50. o option to HDMI when you have a HDMI connected to your TV If you are using a DVI to HDMI cable a separate audio cable is required Reboot the connected device by reconnecting the device s power cable If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise No Picture No Video The TV will not turn on Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the Time menu The TV turns off automatically e f your PC is connected to the TV check your PC power settings e Make sure the AC power cord is plugged in securely to the wall outlet and the TV e When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal gt Check cable connections remove and reconnect all cables connected to the TV and external devices There is no picture video Set your external devices
51. ome Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV You can connect only one Home Theatre e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English Anynet Menu TOOLS Anynet HDMI CEC ENTERC The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu _ Description View TV Changes Anynet mode to TV broadcast mode lt Device List Shows the Anynet device list device_name Shows the connected device menus E g If a DVD recorder is MENU connected the disc menu of the DVD recorder will appear English Anynet Menu Description Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear device_name TOOLS Shows the title menu of the connected device E g If a DVD device_name Title recorder is connected the title menu of the DVD recorder will Menu appear Depending on the device this
52. ow TV Rear Panel The Modem Port on the Wall External Modem IP Sharer ADSL VDSL Cable 1 having DHCP server Err freA LAN Cable LAN Cable Modem Cable Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house TV Rear Panel The LAN Port on the Wall LAN Cable English e f you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values your TV needs to access the Internet so you do not have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows gt computer you can also get these values through your computer You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems tha
53. progress English Problem Possible Solution The connected device is not displayed Check whether or not the device supports Anynet functions Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On in the System menu Search Anynet devices again You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan English Problem Possible Solution The TV sound is not Connect the optical cable between TV and the receiver output through the receiver English Q About AllShare AllShare connects your TV and compatible Samsung mobile phones devices through a network You can play media contents including videos photos and music saved on your mobile phones or the other devices Such as your PC by controlling them on the TV via the network For more information visit www samsung com or contact the Samsung call centre Mobile devices may need additional software installation For details refer to each device s user s guide English 2 Setting Up AllShare MENU M Network AllShare Settings ENTERL E AllShare Settings e Media On Off Enables or disables the media function When the media ll f
54. quality English e HDMI Black Level Low Normal Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality Available in TV mode AV COMPONENT 480i 1080 and HDMI 1080i If the screen does not seem natural change its option to Off Auto Auto2 in Film Mode English mM Reset Picture OK Cancel Resets your current picture mode to its default settings LJ Changing the Preset Sound Mode MENU l Sound Sound Mode ENTERC Sound Mode Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired lf Speaker Select is set to External Soeaker Sound Mode is disabled English LJ Sound Systems Etc MENU I Sound Sound Effect ENTER C E Sound Effect standard sound mode only Use the up and down arrow keys to select an option and then press ENTER L e SRS TruSurround HD Off On standard sound mode only This function provides a virtual 5 1 channel surround sound experience through a pair of soeakers using HRTF Head Related Trans
55. r the SAMSUNG TV code Check the supported resolution of the TV and adjust the external device s output resolution accordingly This smell is normal and will dissipate over time This function is only available with digital channels from an Antenna RF Coax connection TV is tilted to the right or left side There are difficulties assembling the stand base The Channel menu is grey out unavailable Your settings are lost after 30 minutes or every time the TV is turned off Remove the stand base from the TV and reassemble it Make sure the TV is placed on a flat surface If you can not remove the screws from the TV please use a magnetized screw driver The Channel menu is only available when the TV source is selected If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System Plug amp Play Initial setup ENTERL gt You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV The PIP menu is not available Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting
56. reen saver is activated to prevent the formation of ghost images on the screen E General e Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the TV menu in Game Mode the screen shakes gt slightly e Game Mode is not available in PC and TV mode English e After connecting the game console set Game Mode to On to prevent poor picture quality e f Game Mode is On Picture Mode is set to Standard and Sound Mode is set to Movie Menu Transparency Bright Dark Set the Transparency of the menu e Boot Logo Off On Display Samsung logo when the TV is turned on e TV Name GRE Make changes the TV Name lt If you select User Input you can make TV name manually E Anynet HDMI CEC For details on set up options refer to the Anynet HDMI CEC instructions E DivX Video On Demand Shows the registration code authorized for the TV If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using My Downloads the registration is completed For more information on DivX VOD visit http vod divx com English E Common
57. rough a receiver i e Home Theatre instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit If your receiver supports audio only it may not appear in the device list The receiver will work when you have properly connected the optical in Z jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV air signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver English NOTE You can only control Anynet devices using the TV remote control not the buttons on the TV e The TV remote control may not work under certain conditions If this occurs reselect the Anynet device English LY Troubleshooting for Anynet Problem Possible Solution Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theatre can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the System menu English Problem Possible Solution Anynet does not
58. rt time you want If you want to edit or cancel the schedule select the reserved schedule on the Schedule List and select the Edit or Cancel Schedules E Channel List You can view channel information All Channel List TV Radio Data Other Analogue or TV 1 Favourites 1 5 ardon When you press the CH LIST button on the remote control Channel List screen will be displayed at once All Shows all currently available channels nna Programme View 4 gt Ch Mode Watch Page TV Shows all currently available TV channels Radio Shows all currently radio channels Data Other Shows all currently available MHP or other channels Analogue Shows all currently available analogue channels Favourites 1 5 Shows all favourite channels Favourites 1 5 will be displayed when you set Add to Favourites If you want to view favourite channels you added press the CH LIST button and use 4 gt Ch Mode button to move Favourites 1 5 Using the remote control buttons with the Channel List Red Antenna Switches to Air or Cable e Yellow Programme View Channel View Displays the programme when digital channel is selected Returns to the channel view lt gt Ch Mode Channel Move to the All TV Radio Data Other Analogue or Favourites 1 5 When you press the 4 Programme View button you can move to other channels using 4 gt Channel button Watch Information Watches the
59. se information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control mode Selects the Teletext mode LIST FLOF If pressed during LIST mode switches the mode to List save mode In List save mode you can save a Teletext page into a list using the 8 store button gt e SA Teletext on mix off Activates the Teletext mode for the current channel Press the button twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext English sub page Displays the available sub page store Stores the Teletext pages index Displays the index contents page at any time while you are viewing Teletext size Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press it again For normal display press it once again z hold Holds the display at the current page in the case that there are several secondary pages that follow automaticially To undo press it again page up Displays the next Teletext page page down Displays the previous Teletext page English reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again cancel Shrinks the Teletext display to overlap with the current broadcast Colour buttons red green yellow blue If the FASTEXT system
60. se steps 1 Connect the extension cable to the USB port 2 Connect the extension cable and Samsung Wireless LAN Adapter 3 Attach the Samsung Wireless LAN Adapter to the back of the TV near the top using double sided adhesive tape The Samsung Wireless LAN Adapter should be installed in an interference free area in order to avoid interference between the adapter and tuner M Network Setup Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process How to set up automatically gt 1 Goto Network Settings screen To enter it follow the directions of Network Settings English Select the Wireless general Select a network connection type The Network function searches i 1 Wired for available wireless networks When done it displays a list of the available networks WPS PBC In the list of networks press One Foot Connection the A or V button to select a network and then press the ENTERL button If the wirele
61. service provider 30VsNSLNI NONWOO F When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated NOTE e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or CI CARD may cause damage to it Insert the Cl or Cl CARD in the direction marked on the card e The location of the COMMON INTERFACE slot may be different depending on the model e Cl or Cl CARD is not supported in some countries and regions check with your authorized dealer gt lf you have any problems please contact a service provider Insert the Cl or CI CARD that supports the current antenna settings The screen will be distorted or will not be seen English 2 Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may caused by the b gt source or signal The TV image does not look as good as it did in the store
62. solution favertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box gt English LJ Changing the Picture Options E Advanced Settings MENU I Picture Advanced Settings ENTER C available in Standard Movie mode You can adjust the detailed setting for the salad screen including colour and contrast Black Tone Off gt When connecting a PC you can Dynamic Contrast Medium only make changes to Gamma and Shadow Detail 0 White Balance aani Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Move Enter Return Dynamic Contrast Off Low Medium High Adjust the screen contrast Shadow Detail Increase the brightness of dark images Gamma Adjust the primary colour intensity RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation Colour Space Auto Native Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to its default settings Flesh Tone Emphasiz
63. ss router is set to Hidden Invisible you have to select Add Network and enter the correct network Name SSID and Security key to establish the connection Move Enter Return gt If the Security screen pop up appears go to step 6 If you select the wireless router which does not have security go to step 7 6 If the wireless router has security enter the Security key Security or Enter security key G entared PIN then select Done ee ft When you enter the Security key Security or PIN use A V lt 4 gt buttons on your remote to select number characters Previous lt gt Move Enter Return Z You should be able to find the Pass Phrase on one of the set up screens you used to set up your router gt or modem Delete Space 7 The network connection screen appears and network setting is done If it fails to set Security key Security or PIN select Retry or IP Settings If you want to set connection manually select the IP Settings Refer to following How to set up manually Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 Inthe pop up menu that appears click Status 3 On the dialog that appears c
64. t support DHCP also let you use Static IP addresses A network speed of lower than 10 Mbps is not supported English Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically 1 Goto Network Settings screen To enter it follow the directions of Network Settings Select the Wired gt 3 The network connection screen ote Raed uet onne n vo appears and network setting is done Wireless general WPS PBC One Foot Connection Move Enter g Exit Y If it fails to set automatically check Wired network and Internet connection completed the connection of LAN port MAC Address 00 40 30 30 20 10 77 a ae IP Address 192 168 10 21 K If you cannot find network Subnet Mask 255 255 255 0 Gatewa 1 68 10 1 connection values or if you want lt lt to set connection manually set it to Manual Refer to following How to set up manually ee Previous lt gt Move C Enter DS Return Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2
65. tations and stores them in the TV If you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by pressing the button on the remote control Network Auto Manual Selects the Network ID setting mode among gt Auto or Manual Network ID When Network is Manual you can set up Network ID using the numeric buttons Frequency Displays the frequency for the channel differs in each country Modulation Displays available modulation values Symbol Rate Displays available symbol rates e Cable Search Option depending on the country amp cable channels only Sets additional search options such as the frequency and symbol rate for a cable network search Start frequency Stop frequency Set the start or stop frequency differs inp each country Symbol Rate Displays available symbol rates Modulation Displays available modulation values English E Manual Tuning Scans for a channel manually and stores in the TV If a channel is locked the PIN input window appears According to the channel source Manual Tuning may be supported When Antenna Source is set to Air or Cable e Digital Channel Tuning Scans for a digital channel manually and stores in the TV Press the E New button to search the digital channels When scanning has finished a channel is updated in the channel list When selecting Antenna Air Channel Frequency Bandwidth Whe
66. the TV to the wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect PIP functionality is only available when you are using a HDMI PC or components source You turned the TV off 45 minutes ago and it turned on again The message Scramble signal or Weak Signal No Signal appears There are recurrent picture sound issues A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV If you are using a CAM CARD CI Cl check that it is installed into the common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again Check and change the signal source To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture Q Licence 1 DOLBY Manufactured under licence from Dolby Laboratories Dolby and the DIGITAL PLUS PULSE double D symbol are trademarks of Dolby Laboratories Manufactured under licence under U S Patent s 5 451 942 5 956 674 a o 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued S dts amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 2 0 Digital Out Digital Out and the DTS logos are trade
67. unction is on Media contents play can be controlled by mobile phones or other devices that support DLNA DMC Move CC Enter 5 Return E Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function The Media function is available in all devices which support DLNA DMC e Allow Deny Allows Blocks the devices o EJ Delete Deletes the devices from the list This function only deletes the name of the devices from the list If the deleted device is turned on or tries to connect to the TV it may appear on the list again gt English Using the Media Function You can play media contents including videos photos and music saved on your mobile phones or the other devices such as your PC by controlling them on the TV via the network Jo turn off the media contents transmission from the devices set Media to Off in the AllShare Settings Contents may not be played on your TV depending on their resolution and format lt e The ENTERL and lt gt buttons may not work depending on the type of p gt media content e Using the devices you can control the media playing For details refer to each device s user s guide English LJ Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwi
68. wnloads to play files saved on your PC over your TV you should download AllShare PC Software and users manual from www samsung com 1 For more information on how to configure your network refer to Network Connection You are recommended to locate both TV and PC in same subnet The first 3 parts of the IP address of the TV and PC should be the same and only the last part the host address should be changed e g IP Address 123 456 789 English 2 Using aLAN cable connect between the external modem and the PC onto which the AllShare PC Software programme will be installed You can connect the TV to the PC directly without connecting it through a Sharer Router Functions that are not supported when connecting to a PC through a network e The Background Music and Background Music Setting functions The lt lt REW or gt gt FF button while a movie is playing lt The DivX DRM Multi audio embedded caption does not supported b gt AllShare PC Software should be permitted by the firewall programme on your PC English When you use My Downloads mode through a network connection according to functions of the provided server The sorting method may vary The lt lt REW gt gt FF or Lit Pause buttons may not work depending on the content information If you experience any file stuttering issue while playing a video over a wireless network we recommend using

Samsung UE32D5000 LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents