Strong Prima IV
Contents
1. TRONG Digital Terrestrial Receiver PRIMA IV DIGITAL TV STRONG PRIMA IV Dp User Manual Bedienungsanleitung Manuel d utilisateur Istruzioni d uso Manual de usuario N vod k obsluze www strong tv Picture similar ANTENNA RF CABLE 6 KE supplied by STRONG amp Co Japan TV SCART TELEVISION nO Gan i VCR DVD RECORDER i E Fig 1 SCART CABLE STRONG PRIMA IV Digital Terrestrial Receiver Fig 2 Sa NT IN Bi 5V i mA max Oc Supplied by STRONG amp Co Japan TV SCART Fig 3 Fig 4 em mm mm mm PART 1 o English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Features amp Accessories WWWNN 2 0 CONNECTION 2 1 Connecting to TV and Terrestrial Antenna 2 2 Connecting to VCR 2 3 Connecting to a Digital Audio Amplifier 3 0 YOUR RECEIVER 3 1 Front Panel 3 2 Rear Panel 3 3 Remote Control ssa RAR HS 4 0 FIRST TIME INSTALLATION wu 5 0 MAIN MENU 5 1 Channel 5 2 Installation 5 3 Setup 5 4 Tools O GA An ui 6 0 OPERATION 6 1 Changing Channels 6 2 Accessing the Electronic Program Guide EPG 10 6 3 Accessing the favourite channels 10 VD A 1 TROUBLESHOOTING 10 A 2 SPECIFICATIONS 11 LU EEE 0180 500 75 43 Z 0 14 Min from German wired line ES 0820 400 150 0 12 Min from Austrian wired line O 10326 029 922. User Define in GMT Usage menu The GMT offset range is 11 30 12 00 increasing by half hours progressively Date Time Date and Time menus are valid only when selected Of in GMT Usage menu Press OK then numeric button to change the date and time Time Display This menu allow to control whether the time is displayed on screen or not The options are Off On 5 3 4 Timer Setting In this menu you can set a programme timer or sleep timer Programme timer Timer Number You can set 8 timers Timer Mode Off Once Daily Weekly Monthly Timer Service TV Service Radio Service Wake up Channel You can select a desired channel as wake up channel Month Date Day Press W buttons to select your desired month date and day Time Press OK to input the time with the numeric buttons When you want to quit programme timer a saving window appears with lt P select Yes in the confirmation window and press OK to save or select No to cancel Duration Press OK to input desired duration with the numeric buttons Sleep Timer You can set the receiver to power OFF in 10 min 30 min 60 min 90 min and 120 min automatically 5 3 5 OSD Setting This menu allows you to change settings for Subtitle Display OSD Transparency and Load Default OSD Setting Subtitle Display To set the subtitle to Standard or OFF OSD Transparency To set the OSD transparency from Off 50 Load Default OSD Setting To clear all OSD settin
3. Connector To connect your receiver with your VCR using a SCART cable 5 S PDIF Coaxial To connect your receiver to digital audio amplifier 6 Power Cord Your receiver requires a voltage of 100 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet www strong tv PART 1 o English STRONG DIGITAL TV 3 3 Remote Control I Fig 4 1 0 Turns the receiver On Standby 2 0 9 Channel selection or value input 3 FAV Favourite group selection AN Mutes audio output of the receiver 5 MENU Opens the main menu Within menu you will get one step back Bo 6 EXIT Exits from the menu or sub menu di 7 AV Menu Off Change channel to previous next Menu On Moves the cursor up down 8 O Menu Off Increases decreases the volume level Menu On Change settings for specific Menus 9 OK Menu On Activates the highlighted menu item Menu Off Displays the current channel list 10 EPG Shows the EPG Electronic Program Guide in TV mode 11 INFO Shows the actual channel information 12 TXT Shows Teletext on OSD On Screen Display 13 RCL Back to previous shown channel 14 SUB Shows list of subtitled languages 15 EDIT Opens the channel list 16 MOSAIC Show pictures of 9 channels on the screen 17 PAUSE Freeze Resume picture 18 P P Page up down 19 TV R Toggle between TV or RADIO mode 20 AUDIO Sets the current audio channel to left right or stereo 21 AV To
4. the favourite channels 1 Press FAV button to enter the favourite group list 2 Press AW buttons to select the desired favourite group 3 Press AW buttons to select the favourite channel A 1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Do NOT open the receiver cover It may cause a dangerous situation and the warranty will get void Problem Possible cause What to do Standby light not lit Mains lead unplugged Check mains lead power connector No signal found Antenna is disconnected Check antenna lead Antenna is damaged misaligned Check antenna Out of digital signal area Check with dealer Active antenna requires to switch ON Switch receiver s Antenna Power ON antenna power external feed connect external feed No picture or sound on TV VCR SCART AV input is not selected on your TV Switch to correct TV input TV or receiver are not connected to mains _ Check mains lead Scrambled channel message Channel is scrambled Select alternative channel No response of remote control Hand set batteries exhausted Replace handset batteries Forgotten menu or channel Contact local Service Hotline or send email to lock code our Support via www strong tv After moving the receiver to The antenna feed former new point may Try a dire
5. 3 Load Factory Default This menu allows you to reset the receiver back to factory settings which clears all stored channels and personal settings 1 Enter Tools menu select Load Factory Default and press OK you are asked to input password 2 Input a correct password using the numeric buttons the default password is 0000 a confirmation window is displayed 3 Select Yes to return back to factory settings and clear all channels Select No to cancel 4 Press EXIT to exit 5 4 4 RE Upgrade Enter Tools menu select Software Upgrade and press OK Software Upgrade menu is shown 3 Press A Y buttons to select Upgrade by RS 232 or Upgrade by Air item and press OK you are asked to input password default password is 0000 3 Upgrade by RS 232 allows you to make copy from receiver to receiver with a specially wired SCART cable 4 Select Upgrade by Air to check if there is an upgrade available and to load software directly from broadcaster over the air into the receiver 5 Press EXIT to exit A WARNING After an update the receiver restarts automatically During this process NEVER disconnect the receiver from the main or switch power OFF This can damage your receiver and warranty will void S Note This receiver has foreseen an over the air update function which might not be available at your local broadcast conditions For further details visit our website www strong tv or contact your
6. 8 I e0 14 min from French wired line per June 2008 www strong tv STRONG PART 1 English DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside ofthe product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use t
7. C Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners STRONG 2009 All rights reserved 08 2009 11 www strong tv
8. ch packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Referto the user manual of your TV and your antenna m Make sure that the SCART cable and outdoor components of the antenna are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control Bold Character Move to Represents a menu item within a window Italic Character 1 4 Features amp Accessories For all digital Free To Air TV and Radio programmes with outdoor or indoor antenna Quick and easy installation amp user friendly menu Excellent Audio and Video quality 1 000 channels memory capacity Fast channel zapping Electronic TV Programme Guide EPG 8 wake up Timers with 4 modes Sleep Timer Booking of events directly from EPG Full multi lingual DVB subtitling and audio track support Support Teletext via receiver and TV remote control 8 Favourite lists Parental lock function Multi lingual support on screen menu OSD BOX to BOX copy function over SCART cable for channel lists and software update UHF VHF Tuner with Loop
9. ct feed from the antenna another room you are no longer come through a distribution system which able to receive may reduce the digital signal now received digital reception by the box 10 www strong tv PART 1 o English STRONG DIGITAL TV A 2 SPECIFICATIONS Demodulator Demodulator COFDM 16 QAM 64 QAM Transmission mode 2K 8K Video Decoder Profile level MPEG 2 MP ML Video resolution 720 x 576 pixels PAL 720 x 480 pixels NTSC a Decoding amp Video Out PAL amp NTSC Aspect ratio 4 3 16 9 Audio Decoder MPEG MusiCam Layer II Sampling rate 32 44 1 48 kHz Audio mode Stereo Dual Left Dual Right Tuner Front End DVB T UHF amp VHF Tuner Input frequency range 174 230 MHz VHF and 470 862 MHz UHF Loop through frequency range 47 862 MHz Input signal level 82 20 dBm Memory and System Flash memory 512 KByte SDRAM 4 MBytes Connectors ANT IN IEC Female TOTV IEC Male TV SCART RGB CVBS VCR SCART CVBS S PDIF coaxial output General Data Supply Voltage 100 240 V AC SMPS 50 60 Hz Power Consumption 5 W max Power consumption in Standby lt 1W Operating Temperature 0 40 C Storage Temperature 30 80 C Operating Humidity Range 10 85 RH Non condensing Size W x Dx H in mm 180 x 97 x 33 Net weight 0 31 kg STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EE
10. e To Air channels Lock First will be listed all unlocked and then the locked channels 5 1 1 4 Move Press 4 to activate the Move function The selected channel will be marked in a symbol use the A W buttons to move the selected channel to the desired position With lt P select Yes in the confirmation window and press OK to save 5 1 2 Radio Channel list Basically the operation of Radio Channel List is the same as in TV Channel List only difference is that in Radio Channel List there is no video information so it will always display the radio logo at the right preview screen 5 1 3 Delete all Favourites and Groups Use this menu to delete all favourite channels Select Delete All Favourites with the A W and press OK with lt gt select Yes in the confirmation window and press OK to delete or select No to cancel 5 1 4 Delete all Use this menu to delete all channels Select Delete All with the A W and press OK then enter the Password default 0000 In the confirmation window select Yes with lt gt and press OK to delete or select No to cancel 5 1 5 Group Rename In this menu you can change favourite group name Use the W buttons to select Group Rename and press OK to enter 1 With the AY buttons select a group and press OK 2 Atthe appearing Keyboard use the A Y 4D buttons to highlight desired letters or numbers and press OK to insert After you entered desired group name highlight OK at the keyboard to confirm 3 Press EXIT t
11. g a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions ad improper adjustment of other con
12. ggle between TV and AV mode 22 Coloured buttons for Teletext and other functions 4 0 FIRST TIME INSTALLATION If you use the receiver for the first time the Easy Install menu appears Use the lt P buttons to change settings for setup of Region OSD Language and Antenna Power and the A W to select Then use the A W buttons to move focus to Search and press OK to proceed with the automatic channel scan 5 0 MAIN MENU In viewing mode always press MENU to enter the Main Menu It consists of following submenus Channel Installation Setup and Tools 5 1 Channel 1 Use the A buttons to select Channel and press OK to enter 2 Press EXIT to go one step back or exit MENU Note You can also press OK in TV mode to enter channel list www strong tv STRONG PART 1 English DIGITAL TV 5 1 1 TV Channel list 1 In Channel submenu select TV Channel List with the A W buttons and press OK to enter 2 Use the lt P buttons to change channel group assumed you have already set up Favourite groups 3 With the AY buttons select the channel you want to watch With OK you can watch the selected channel in full screen mode 5 1 1 1 Edit Use this menu to favour lock skip delete and rename channel list Press 1 to enter edit menu With the A W buttons highlight a channel and press OK to select or press 0 to select all channels Selected channels will get marked This way of selection can be executed for each of the edit func
13. gs and reset to default value 5 3 6 Parental Lock This menu allows you to protect the installation menu or channels with a password and you can change the Password If you want to enter the menu you will be asked to input the password default 0000 Menu Lock Locks the installation menu You can set menu lock to ON OFF Channel Lock Off Manual Age 4 Age 18 New Password To change the password Confirm Password To confirm the new password 5 4 Tools Press MENU button to enter main menu Select Tools and press OK button to enter tools menu 1 Press AW buttons to highlight the desired menu and press OK button to enter 2 Press EXIT to exit 5 4 1 Receiver Information This menu displays some Receiver information like Receiver Hardware Software Signature and our Web site www strong tv 1 In Tools menu select Receiver Information and press OK button to open receiver information window 2 Press EXIT to exit www strong tv PART 1 o English STRONG DIGITAL TV 5 4 2 Game This menu allows you to play games Tetris Snake and Othello on this receiver 1 Select Game in Tools menu and press OK to enter game menu 2 Press AY buttons to select a desired game and press OK to enter the game Highlight Start and press OK to start the game For changing levels highlight Setup and use lt P buttons 3 Press EXIT to quit the game Note You can also press OK button to pause playing 5 4
14. his product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization Ifthis product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way Ifyou cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while usin
15. ined order You can activate deactivate the LCN function by setting the LCN Mode to ON OFF Note LCN Mode is automatically set by selecting the region during first installation A change of LCN mode can cause loss of some channels 5 3 Setup This menu allows you to set OSD Language TV System Region and Time Timer Setting OSD Setting and Parental Lock 1 Press AY buttons to highlight desired menu and press OK button to enter the setting menus Then press AY buttons to select desired item Settings can be changed by pressing lt P buttons You can get better overview if press OK first Now you can select desired setting by A W buttons and confirm it with OK 2 Press EXIT button to exit 5 3 1 OSD Language This menu allows you to set OSD Language 5 3 2 TV System This menu allows to setup different settings concerning your TV set Display Mode PAL NTSC AUTO Aspect Ratio Use this menu to configure the screen aspect between 4 3 PS Pan amp Scan 4 3 LB Letter Box and 16 9 Wide Screen Video Output Use this menu to switch the video output mode RGB CVBS or S Video English Pe pS www strong tv STRONG PART 1 English DIGITAL TV 5 3 3 Region and Time Here you can set your region and time zone Region This menu is used for changing the region setting GMT Usage This menu is used for usage of GMT The options are Off User Define By Region GMT Offset This menu is valid only when selected
16. local Serviceline English 6 0 OPERATION 6 1 Changing Channels There are 4 ways of channel selection stepping through the channel list selection by number from the on screen channel list and using the electronic programme guide EPG 1 Stepping through the channel list To move through the channel list press the A W buttons on the remote control 2 Selected by number Enter the channel number directly by pressing numeric buttons and press the OK to select desired channel 3 Selected by on screen channels list You can also select the required channel directly from on screen channel list This is displayed using the receiver s main menu See chapter 5 1 1 TV Channel list in this manual for operation detail Alternatively you can call up channel list by pressing OK in viewing mode 4 Selected by EPG You can also select the required channel directly from electronic programme guide EPG This is displayed by pressing EPG button on remote control See in the below chapter of this manual for operation detail www strong tv STRONG PART 1 English DIGITAL TV 6 2 Accessing the Electronic Program Guide EPG 1 Press EPG to enter EPG menu Press 2 to switch between channel list events schedule of the selected channel and now next events 3 Inthe event schedule press OK to book the selected event press 3 to open the Detail menu for the selected event 4 Press 1 to open the Booking list menu N 6 3 Accessing
17. o cancel the group rename www strong tv PART 1 e English STRONG DIGITAL TV 5 2 Installation 5 2 1 Auto Scan 1 Usethe AW buttons to select Installation press OK to enter menu 2 With the AW buttons select Auto Scan press OK to enter the menu 3 Dress the lt P buttons to change Scan mode and use the A W to highlight Search press OK to start auto scan All Free To Air and scrambled channels Free only Free To Air channels 5 2 2 Channel Scan Use the A W buttons to select Installation press OK to enter the menu Use the A W buttons to select Channel Scan and press OK to enter the menu Use the lt P buttons to select one of two Scan Modes By Channel and By Frequency When By Channel is selected use the cursor buttons to select Scan Band and Channel No When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth Select Network Search to ON or OFF highlight Search and press OK to start scan 5 2 3 Antenna Setting 1 Press MENU to enter main menu 2 Use the AY buttons to select Installation press OK to enter the menu 3 With the AW buttons select Antenna setting and press OK to enter 4 Press the lt P buttons to change setting If On is selected the receiver will provide 5 V antenna power for active antennas 5 Press EXIT to exit 5 2 4 LCN Mode If LCN Logical Channel Number is activated and LCN signal is provided by operator then channels will be stored at operator def
18. through function Automatic and manual channel scan options www strong tv STRONG PART 1 English DIGITAL TV m Many channel handling options m 3 Games Tetris Snake Othello Support of active antenna by 5 V output Depending on local signal conditions Availability depending on broadcaster Accessories m 1 User Manual m 1 Remote control unit m 2x Batteries AAA type Note The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 2 0 CONNECTION 2 1 Connecting to TV and Terrestrial Antenna To receive the broadcast signal connect the terrestrial antenna cable to the ANT IN connector at the back of the receiver Fig 1 2 2 Connecting to VCR Connect the receiver to a DVD Recorder or VCR using a SCART cable Fig 1 2 3 Connecting to a Digital Audio Amplifier Connect your Digital Audio Amplifier with the S PDIF connector on the back of the receiver Fig 1 3 0 YOUR RECEIVER 3 1 Front Panel Fig 2 3 2 Rear Panel Fig 3 1 ANT IN To connect an antenna for reception of broadcasting signal 2 TOTV To connect a TV set or to connect an extra receiver 3 TV SCART Connector To connect your receiver with your TV set using a SCART cable 4 VCR Scart
19. tions m Favor To add selected channel or all channels to a favourite group press 1 Use the A W to select a desired group and press OK With lt P select Yes in the confirmation window and press OK to save Selected channels will get marked with folder symbol m Lock To Lock channel or all channels press 2 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the symbol m Skip To Skip channel or all channels press 3 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the and will be skipped during channel zapping in full screen mode Delete To Delete channel or all channels press 4 with lt P select Yes in the confirmation window and press OK to save If you have done all modifications concerning channel editing press EXIT to cancel 5 1 1 2 Find Press 2 to enter Find menu Use the A W dk buttons to highlight desired letters or numbers and press OK to insert After each character the channel list will search the channel according your input and list the matched channel Press EXIT to quit Find mode 5 1 1 3 Sort Press 3 to enter Sort menu Use the W buttons to highlight desired sort way and press OK to confirm Default Sorting by searched Order from lowest to highest frequency Name A Z Sorting in Alphabetical Order Name Z A Sorting in Alphabetical Order FTA First in the list will be Fre
20. trols could damage the product and require extensive repair word by a qualified technician www strong tv PART 1 e English STRONG DIGITAL TV 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required mare sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable English 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or ifyou are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with su
Download Pdf Manuals
Related Search