Lenco SCD-37 USB
Contents
1. 1 Repeat play 1 Press the REPEAT button once to play the current song over and over r 1 will show in the display 2 Press the REPEAT button twice to repeat the current folder r F will show in the display 3 Press the REPEAT button three times to repeat playing all the songs in order r A will show in the display 4 Press the REPEAT button four times to cancel the repeat play r n will show in the display 7 2 Programmed play In STOP mode you can make a program of up to 20 tracks in the order you want them to be played 1 Slide the FUNCTION switch to CD USB AUX IN position Make sure the CD is stopped 2 Press the PROGRAM button The program number Pro 01 3 Press the PREV NEXT button to select the desired track and press the PROGRAM button to confirm 4 REPEAT step 3 to program other tracks till you finish up to 20 tracks 5 Press the PLAY PAUSE button to start programmed play To play all the programmed tracks repeatedly Press the REPEAT button in program play mode To change the current program Just create a new program following the programming procedure To cancel programmed play Press the STOP button twice or slide the FUNCTION switch to OFF position 8 PLAYING OTHER AUDIO DEVICES THROUGH YOUR SET You can enjoy the music of a digital MP3 player computer or any other external audio device with a 3 5mm stereo jack through the set 1 Insert an audio cable not included wit2. battery compartment To use the player on batteries disconnect and remove the AC power cord both from back of the player and the wall outlet Note e If the plug of the AC power cord does not match your outlet do not force it Reverse it and try again The plug is polarized and only fits one way into the wall outlet and rear of the set e Replace the batteries when the POWER lamp dims or when the player stops operating Replace all the batteries with new ones Before you replace the batteries be sure to take out the CD from the player e If the CD does not play on batteries this means the batteries are almost used up However the radio may continue to play on these weak batteries because it uses less power than the CD player 6 PLAYING A CD or MP3 1 Connect the supplied AC power cord or batteries 2 Slide the FUNCTION switch to CD USB AUX IN position 3 Open the CD door and place a disc in the CD compartment with the label side up 4 Close the CD door the unit will play the disc 5 Press the PLAY PAUSE button in play mode to pause the playback Press the PLAY PAUSE button again to resume the playback 6 Adjust the VOLUME control to your preference 7 Press the STOP button to stop the playback 8 Slide the FUNCTION switch to OFF position to turn off the power NOTE will show in the display if there is no disc in the CD compartment or if the disc is upside down 06 7 REPEAT AND PROGGRAMMED PLAY 7
3. dirty it may cause a skipping of sound during CD operation Clean with a commercially available lens cleaner and blower Cleaning the Cabinet Clean the cabinet panel and controls with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzene 3 SPECIFICATION Power source AC 230V DC 9V 6 size C batteries Alkaline batteries are recommended Speakers 4 ohm Output power 1 0W channel Dimensions 263 X 223 X 121 Weight 1225g without batteries Playable disc type Any normal CD used in portable players Radio Frequency range FM 87 5 108 MHz AM 520 1620KHz 02 4 PARTS NAME AND FUNCTIONS 4 1 Parts on the front of the main unit Nw n A 1 Folder folder play 2 NEXT skip next track Press and hold the button to fast forward play during play mode 3 PREV skip previous track Press and hold the button to fast backward play during play mode 4 Repeat repeat the track folder or whole disc 5 Power LED indicator LED light main unit is turning on LED off main unit is turning off 6 LCD display 03 7 FM ST LED indicator LED light main unit is in FM stereo mode LED off main unit is in FM mono mode 8 Stop Press this to stop play mode 9 Play pause Press this to play the disc When pressed in play mode pause mode is set Press again to resume playback
4. is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the CD player section Should this occur the player will not operate properly In this case remove the CD and wait about an hour for the moisture to evaporate e To be completely disconnect the power input the mains plug of apparatus shall be disconnected from the mains As the disconnect devices is the mains plug of apparatus e The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use This CD player is designed to be played on a stable no vibration position If you bump the set during CD play the music will stop or skip for a few seconds This is normal for this type of player 01 Notes on CDs e Before playing clean the CD with a cleaning cloth Wipe the CD from the center out e Do not expose the CD to direct sunlight or heat sources such as hot air ducts not leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car e Do not stick paper or stickers on the CD nor scratch the CD e After playing store the CD in its case If there is a scratch dirt or fingerprints on the CD it may cause a tracking error or skipping Scratched Discs If your disc is badly scratched it will not play You may be able to repair the disc if you buy a disc polisher 2 MAINTENANCE Cleaning the Lens If the lens becomes
5. 10 PROG Programming the play sequence 11 OPEN CLOSE open or close CD door 12 CD door 13 FM antenna 14 Speakers 15 USB socket connecting to USB storage 4 2 Parts on the left side of the main unit OFF e CD USB VOLUME RADIO b AUN Ges rett OECD i 1 Function switch 2 VOLUME control increase decrease the volume 04 4 3 Parts on the rear of the main unit 1 Audio input Input audio signal 2 AC socket 4 4 Parts on the right side of the player T Tia ia D 1 Tuning control 2 FM AM Switch 3 Display FM AM frequency 05 5 CHOOSING THE POWER SOURCES You ca use the AC power or batteries as a power source 5 1 Connecting the AC power cord Insert one end of the supplied AC power cord into the socket located at the rear of the player and the other end to the wall outlet 5 2 Connecting to USB storage 1 Please connect the USB storage to the USB terminal of the main unit 2 The main unit will read the contents that are available on the USB storage device automatically Note 1 When disc play then insert the USB the unit will automatically switch to play USB 2 When USB play then place the disk the unit will automatically switch to play the disc 3 When the existence of USB and the disc the unit will play USB at first 5 3 Using the player on batteries Insert 6 size C batteries not supplied into the
6. User Manual SCD 37 USB For information and support www lenco eu CONTENT TEPREGCAUTIONS E 01 2 MAINTENANCE E 02 3 SPECIFICATION ois scississitin icc enw ccieseuawa evaded iea a aap aaa 02 4 PARTS NAME AND FUNCTIONS 2 2 cc ccececeeeeee eens ee eeeeeeeeeeeeeeenneees 03 4 1PARTS ON THE FRONT OF THE BLANER AAA 03 4 2 PARTS ON THE LEFT SIDE OF THE BLANER AA 04 4 3 PARTS ON THE REAR OF THERLANE 0 2 ec eeeeee ee eee e eee eee teen eee n ees 05 4 4PARTS ON THE RIGHT OF THE PLAYER teeta ents eeeeneeees 05 5 CHOOSINGTHE POWER SOURCES ccescccscscessseeseseseeeeseseeeeeaeseseseneeeetaes 06 5 1 Connecting the AC power cord 06 5 2 Connecting to USB Stragen iaai iddaa taa 06 5 3 Using the player On battertes AA 06 6 PLAYING A CD OR MPS rites leese eege AE eg 06 7 REPEAT AND PROGGRAMMED PLAY 07 1 1 Repeat Dm aseene dee NEES dree cit 07 7 2 Programmed Me 07 8 PLAYING OTHER AUDIO DEVICES THROUGH YOUR SET 07 9 LISTENING TO THE RADIO wc oie ccicscie nnn canthiedisawenscascaeseneassssvcesareesspe 08 I0 IROUBLESHOCTHNG aeukKKaENeNENSNEENNOKEENEER ENNER NENNEN NEEN NEE NNN ee 09 1 PRECAUTIONS Thank you for purchasing CD player Please read this manual carefully before operating and reserve it for future reference It will be helpful to you if you encounter any operational problem On Safety e As the laser beam used in the CD player section may be harmful to the eyes do not attempt to disassemble t
7. d need to dispose of this product please note that Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice Waste Electrical and Electronic Equipment Directive 10
8. h 3 5mm plugs on each end into the HEADPHONES jack or LINE OUT jack of your MP3 player or computer and the other end into the AUX IN jack of the set 2 Connect the supplied AC power cord or batteries 3 Slide the FUNCTION switch to CD USB AUX IN position 4 Turn on your MP3 player or computer Adjust the VOLUME control of the MP3 player computer and the player to the desired level 5 Slide the FUNCTION switch to OFF position after use NOTE When connecting an audio player to the set while the set is playing CD the set will exit CD mode and switch to AUX IN mode automatically 07 9 LISTENING TO THE RADIO 1 Connect the supplied AC power cord or batteries 2 Slide the FUNCTION switch to RADIO position the POWER lamp will turn on 3 Slide the FM AM switch to the proper position that you want 4 Tune into the station you prefer using the TUNING control Adjust for the clearest sound 5 Adjust the VOLUME control to your preference 6 Slide the FUNCTION switch to OFF position to turn off the radio NOTE Next time you want to listen to the radio just slide the FUNCTION switch to RADIO position The player automatically starts playing the previously tuned station To improve broadcast reception Change position of the antenna for FM AM 08 10 Trouble shooting Please refer the following instruction when there are some problems with this unit If the problem still exits please consult your nearest service cen
9. he cabinet Refer servicing to qualified personnel only e The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus e Should any solid object or liquid fall into the player unplug the player and have it checked by qualified personnel before operating it any further On Placement Do not leave the player in a location near a heat source or in a place subject to direct sunlight excessive dust or mechanical shock e Do not place the player on an inclined or unstable place e Do not place anything within 1 inch of the back of the cabinet The ventilation holes must not be covered for the player to operate properly and prolong the life of its components e If the player is left in a car parked in the sun be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun e Since a strong magnet is used for the speakers keep personal credit cards using magnetic coding or spring wound watches away from the player to prevent possible damage from the magnets On Power Sources e For battery operation use 6 size C batteries We recommend alkaline batteries for longer life e When the batteries will not be used for a few weeks or more remove them to avoid damage that can be caused by battery leakage or corrosion e Battery shall not be exposed to excessive heat such as sunshine fire or the like e If the player
10. ter Problem Remedy The power is not on Connect the AC power cord to a wall outlet securely Make sure the batteries are inserted correctly and they are fresh Make sure the FUNCTION switch is at the General There is no sound right position as you want Adjust the volume Appears in the display Insert the CD with the label side up Try another compact disc This set only play CD MP3 or WMA discs Make sure that the CD compartment is closed Place the CD with the label side up Take out the CD and leave the CD DOOR open for about an hour to dry moisture condensation CD does not play Replace the disc this set will not play CD Player damaged or scratched CDs or buy a disc repair polisher to repair it yourself Clean the CD Make sure the FUNCTION switch is at CD USB AUX IN position Make sure to disconnect the audio cable from the AUX IN jack at the bear side of the set Clean the CD or replace it if the CD is badly damaged The sound drips out Place the player in a location free from vibration Check if your batteries are fresh CD does not play while the It is normal since the radio uses less radio continues to play on power than the CD player battery power The sound is weak or has Replace all the batteries with new ones if Radio poor quality they are weak or bring the set near a window or rotate the set 09 If at any time in the future you shoul
Download Pdf Manuals
Related Search