Philips DVP3126X DVD Player
Contents
1. Power supply must not be interrupted during upgrade To check the current software version of this DVD player Press OPEN CLOSE 4 onthe DVD player to open the disc tray gt The disc tray will open Press numeric keypad 966 on the remote control gt The software installed in the DVD player appears on the TV screen To download and install the latest software to the DVD player Visit the Philips website www philips com support to check the availability of the latest software upgrade Download the software to a CD R Insert the CD R to the disc slot gt The menu appears Firmware Update Erase and Program Start Cancel Firmware Update Programming please wait Do not switch the player off Press 4 P to select START then press OK to confirm gt The latest software will be downloaded in the DVD player 39 01 45_dvp3126_94 engl indd 39 2007 01 31 2 20 42 PM Troubleshooting WARNING Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or Philips for help Problem Solution No power Press STANDBY ON button on the front of the DVD player to turn on the system M2. DVD VIDEO PLAYER DVP3126 Thank you for choosing Philips Need help fast Read your User s Manual first for quick tips that make using your Philips product more enjoyable If you have read your instructions and still need assistance you may access our online help at www philips com support PHILIPS PHILIPS 01 45_dvp3126_94 engl indd 1 2007 01 31 2 20 30 PM The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus Due to the inconsistency of disc formats provided by various disc manufacturers your DVD system may require a playability enhancement or upgrade As DVD technology advances these enhancements will become common and will be easy to complete Go to www philips com support for software upgrade 01 45_dvp3126_94 engl indd 2 This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE AR
3. Read chapter Playback from Disc Playable discs for details Make sure the disc is not scratched or warped Clean the disc or replace a new one Check if the disc is defective by trying another disc The aspect ratio of the screen cannot The aspect ratio is fixed on the DVD disc be changed Depending on the TV it may not be possible to change the aspect ratio Need Help Visit us at www philips com support 40 01 45_dvp3126_94 engl indd 40 2007 01 31 2 20 42 PM Troubleshooting continued Problem Solution Not able to select some items in the Press STOP button twice before selecting the setup system setup system menu menu Depending on the disc availability some menu items cannot be selected The DVD player does not start Insert a readable disc with the playback side facing down playback Check the disc type color system PAL NTSC and region code Check for any scratches or smudges on the disc Press SETUP to turn off the setup menu screen You may need to enter the password in order to change the parental rating level or to unlock the disc for playback Moisture may have condensed inside the system Remove the disc and leave the system turned on for about an hour Disconnect the power cord from the power outlet for a few minutes Reconnect the power cord and try to operate again as usual Picture freezes momentarily during Check the disc for fingerprint s
4. continued Operations for video playback Using the Disc Menu Depending on the disc a menu may appear on the TV screen once you load in the disc To select a playback feature or item Use A V lt 4 P keys or numeric keypad 0 9 on the remote then press OK to start playback To access or remove the menu Press DISC MENU on the remote This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture During playback press ZOOM repeatedly to display the picture with different scales gt Use A V lt P keys to pan through the enlarged picture gt Playback will continue Press ZOOM repeatedly to return to the original size Resuming playback from the last stopped point Resume playback of the last 5 discs is possible even if the disc was ejected open standby or power off Auto resume is active for DVD VCD SVCD CD types of discs Load one of the last 5 discs gt Play from start press PREV appears during playback for first 10 seconds During the message appears on the TV screen press PREV to start playback from the beginning gt Playback restarts from the first title DVD or the beginning of the title track VCD CDDA SVCD To remove the message from the TV screen press DISPLAY You can slow forward or slow reverse a disc during playback and select a different speed For DVD VCD SVCD Press A W during playback to select t
5. or the entire album in audio software Each title is assigned a title number enabling you to locate the title you want TV OUT jack Jack on the back of the DVD System that sends video to a TV WMA Windows Media Audio Refers to an audio compression technology developed by Microsoft Corporation WMA data can be encoded by using Windows Media Player version 9 or Windows Media Player for Windows XP Files are recognized by their file extension WMA 43 2007 01 31 2 20 42 PM WARRANTY This APPARATUS IS covered under warranty against any defect arising out of faulty or defective material or workmanship for a period of 6 months from date of purchase Should a defect develop during the period of warranty Philips India Limited undertakes to repair the apparatus free of charge through an Authorised Philips service Center If the purchaser shifts his residence to other town the warranty will be valid at the nearest Authorised Philips service Center This warranty is not valid in case The apparatus is not used according to this manual 2 Defects are caused by improper or reckless use 3 Any repair work are done by person other than Authorised Philips Service Center 4 Any modification or alteration of any nature are made in the apparatus 5 The serial number is tampered 6 This warranty form is not completed immediately after purchase Serial No Bill No amp Date of Purchase Purchaser s Name Location amp
6. Tate TET Parental control 8 Aduit Set Password Video In Rating press A W to select Parental control then press P Rating Use the alphanumeric keypad 0 9 to enter the four digit password see page 36 Changing the Password then press Audio Misc en I Kid Safe Press x Y to select Rating then Childsafe acceptable for viewers of all press gt Press A to select an item then press 2 G P to access General Audience recommended as Example Parental control acceptable for viewers of all ages gt The options for the selected item appears 3 PG gt If the selection in the menu is greyed Parental Guidance suggested out that means the feature is not 4 PG 13 available or not possible to change at Unsuitable for children under age 13 the current state 5 PG R Use A Y to select a setting and press Parental Guidance recommended that OK to confirm parents restrict children under 7 from Example 8 Adult viewing gt The setting is selected and setup is 6 R complete Restricted recommended only when To exit press SETUP supervised by a parent or adult guardian 7 NC 17 No Children under age 17 not recommended viewing for children under age 17 8 Adult Mature Material should be viewed only by adults due to graphic sexual material violence or language TIPS The underlined option is the factory default setting Press lt t
7. Video jacks YPbPr Using an accessory RF modulator Connecting the power COrd sscssssssssessescssesesesssessesssseessesscsessssecssecssesssesssessscsensees Optional connections Connecting to a Multi channel Receiver sccssccsssccsssecsssscsssecsssecssseescsessssssesees Receiver has a Dolby Digital decorder if Connecting to a stereo systeM seeeee l3 Stereo system has right left Audio In jacks als Connecting to a digital AV receiver sssseessee l3 Receiver has a PCM Dolby Digital or MPEG decoder ssssssssssssssessssssssreesesreeteterrrreeseeseesssss 13 Product Overview Front and Rear panels Remote Control cscsssscsssccssecsssscsssccessscessseessssssssssssessssssssssessssssssssssssssessssesssseoesses Getting Started Step I Inserting BatterieS sssissssississsssssssssssssssssassosassssssssssssosassesss ssss ssas ssss ssss sssssssas Using the remote control to operate the system Step 2 Finding your viewing channel 0 i Step 3 Setting up Progressive Scan featurre cccccsccccsscccssccccsccssscssseessssescsseesess Step 4 Selecting the matching color system s esssesrseeeseeseserseereeesceesseesesesoeeseeeseeeseee Step 5 Setting the language ssessseesseee On screen display OSD language Audio Subtitle and DVD menu languages Playback from Disc Playable T E r r a Supported formats Playback
8. a picture on the TV screen VOLUME Displays the speaker s volume level REPEAT REPEAT A B Selects various repeat mode Repeats playback a specific section on a disc 01 45_dvp3126_94 engl indd 15 fo Ce Cs Ca Co PHILIPS DVD PLAYER REPEAT A B To switch the DVD player to standby mode or ON DISPLAY Displays information on TV screen during playback lt gt Cursor buttons for moving to the left or right do a fast forward reverse search AV Cursor buttons for moving up down do a slow forward backward SETUP Enters or exits the system setup menu NEXT Pl Skips to the next title chapter track MUTE Disables or enables sound output Alphanumeric keypad Selects numbered items in a menu AUDIO Selects an audio language DVD VCD or an audio channel 15 2007 01 31 2 20 38 PM Getting Started Step Inserting Batteries Step 2 Finding your viewing channel Press STANDBY ON on the DVD player to turn it on Turn on the TV and set it to the correct video in channel You should see the blue DVD background screen gt Usually these channel are between the Open the battery compartment lowest and highest channels and may be called FRONT A V IN VIDEO See your TV s manual for more details gt Or you may go to channel on your TV then press the Channel down CAUTION button repeated
9. adjusting the brightness contrast tint and color saturation Use A Y to select a setting and press OK to confirm If you select PERSONAL then proceed to steps Q gt The setup menu appears TIPS The underlined option is the factory default setting Press A Y to highlight one of the following options BRIGHTNESS Increase the value to brighten the picture or vice versa Choose zero 0 for average setting CONTRAST Increase the value to sharpen the picture or vice versa Choose zero 0 to balance the contrast TINT Increase the value to darken the picture or vice versa Choose zero 0 for average setting COLOR Increase the value to enhance the color in your picture or vice versa Choose zero 0 to balance the color Press lt 4 P to adjust the setting that best suits your personal preference O Repeat steps for adjusting other color features Press OK to confirm Press lt to go back to previous menu item Press SETUP to exit the menu item 01 45_dvp3126_94 engl indd 31 31 2007 01 31 2 20 41 PM DVD Menu Options continued Using the Audio setup menu Press SETUP on the remote control gt The system setup menu appears Language Front Speakers Center Speaker Video Surround Speakers Subwoofer Digital Output Night Mode Down Sampling Press A to select Audio then press P Press A to select an item then pre
10. selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A Y to select a setting and press OK to confirm Example English gt The setting is selected and setup is complete To exit press SETUP TIPS The underlined option is the factory default setting OSD Language This menu contains various language options for the language displayed on the screen For details see page 19 Subtitle Audio DVD Menu These menus contains various language options for audio subtitle and disc menu which may be recorded on the DVD For details see page 19 Press lt to go back to previous menu item Press SETUP to exit the menu item 28 01 45_dvp3126_94 engl indd 28 2007 01 31 2 20 40 PM DVD Menu Options continued Setting the Aspect Ratio The picture shape can be adjusted to fit your TV and the format must be available Using the Video setup menu Press SETUP on the remote control on the playback disc Otherwise the TV gt The system setup menu appears display will not affect the picture during playback PME aspect ratio In Video press A WV to select Aspect View Mode Ratio then press gt Video TV System l Video Out 4 3 Audio Smart Picture Select this if you have a normal TV A wide i Si Rating screen display with black bars on the top and bottom will be displayed on the TV s
11. using YPbPr and a progressive scan television is required Using Component Video jacks YPbPr Use the component video cables red blue green to connect the DVD player s YPbPr jacks to the component video input jacks or labeled as YPbPr on the television cable not supplied To hear sound of this DVD player through your television use the audio cables white red to connect FRONT L R AUDIO OUT jacks of the DVD player to the corresponding AUDIO IN jacks on the television cable supplied Proceed to page 17 for detailed progressive scan setup TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet 10 01 45_dvp3126_94 engl indd 10 2007 01 31 2 20 37 PM Connections continued RF coaxial cable to TV lt Back of RF Modulator example only IMPORTANT To hear sound of this DVD player If your television only has a single through your TV use the audio cables Antenna In jack or labeled as 75 white red to connect FRONT L R ohm or RF In you will need an RF AUDIO OUT jacks of the DVD player to modulator in order to view the the corresponding AUDIO IN jacks on DVD playback on the television See the RF modulator cable supplied your electronics retailer or contact Philips for details on RF modulator availability and operations Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN
12. Features Starting disc playback ccsscsssscscsscsssesssesssscsssssessssessssssssssesssscsssssssssscsssssssssssseeness Basic playback controls 2i Pausing playback sal Selecting title chapter track Stopping playback Operations for video playback ssssssssssseessscrssssesessscecssesesssessseessesssessssseseseeesseees 22 Using the Disc Menu a ZoOMINE Iaer ara i Resuming playback from the last stopped POiNt ssecseecsecseesseessecseecneesseessecstesseesseesseceenseeseees 22 Slow Motion Forward Reverse Searching 22 Selecting various repeat functions 23 Repeat play Modessa eie Sa are R N RT 23 Repeating a section within a chapter t ack carinae 23 01 45_dvp3126_94 engl indd 6 2007 01 31 2 20 36 PM Contents Viewing the disc playback information sssccsssccssssccssscsssssessssssscssssssesseees 24 Title Chapter Track Selection seriinin EEEa ii aE E REEE EEES 24 Time Search ssesssssssassssccasorcsszsesesesssn 24 ANS Esraa 24 Special DVD Features woes 25 Playing a Tittle svirrer ira LN AE A AN R TA 25 Changing the Audio Language 25 SUDtitl eSis 25 Special VCD and SVCD Feature wee 25 Playback Control PBC sscscccscncsscssssasececszwsccssscaseccssccvssuvausnscedsabocstasansscadavscesiavansesctssavsctevvensceatssccobsveasten 25 Playing MP3 WMA JPEG Kodak Fuji Picture CD 26 27 General Operation sssssccsssccssssszsassass
13. Fit Select this to take the minimum value of horizontal and vertical fit scale ratio like letter box Pan Scan Select this to take the maximum value of horizontal and vertical fit scale ratio Use A Y to select a setting and press OK to confirm This menu contains the options for selecting the color system that matches the connected TV For details see page 18 This setting allows you to toggle the output of the video signal between Interlaced and P Scan Progressive Scan In Video press A W to select Video Out then press P Interlaced Select this for Interlaced YPbPr connection P Scan Select this when you want to make progressive scan YPbPr connection on your DVD player to a progressive scan TV Use A Y to select a setting and press OK to confirm TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 30 01 45_dvp3126_94 engl indd 30 2007 01 31 2 20 41 PM DVD Menu Options continued Smart Picture This DVD player provides four predefined sets of picture color settings In Video press A W to select Smart Picture then press P Standard Select this for a preset standard picture setting Vivid Select this to make the picture brighter Cool Select this to make the picture softer Personal Select this to personalize your picture color by
14. M Product Overview Front and Rear Panels STANDBY ON Turns on the player or switches to standby mode Disc Tray OPEN CLOSE 4 Opens or closes the disc tray Display panel Shows information about the current status of the DVD player PHILIPS PLAY PAUSE Pll Starts or pauses playback IR Sensor Point the remote control towards this sensor Mains AC Power Cord Connect to a standard AC outlet Multi channel Audio Out Center speaker subwoofer front and rear speakers multi channel connection COAXIAL Digital audio out Connect to coaxial AUDIO input of a digital audio equipment REARR FRONTR COAMAL AUDIO OUT YPbPr Component Video Out Connect to YPbPr input of a television TV OUT CVBS Connect to CVBS Video input of a television 14 01 45_dvp3126_94 engl indd 14 2007 01 31 2 20 37 PM Product Overview continued Remote Control DISC MENU Enters or exits the disc contents menu Switches on or off the playback control mode for VCD 2 0 only OK Confirms an entry or selection RETURNITITLE To go back to previous menu show title menu PREV Skips to the previous title chapter track E STOP Stops playback Pil PLAY PAUSE Starts or pauses playback SUBTITLE To access subtitle language system menu ZOOM Enlarge
15. TIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS IT Is RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER PLEASE CONTACT OUR CUSTOMER SERVICE CENTER 2007 01 31 2 20 35 PM English 6 01 45_dvp3126_94 engl indd 3 2007 01 31 2 20 35 PM General Information Environmental Information All unnecessary packaging has been omitted The packaging has been made easy to separate into two materials cardboard box and polyethylene bags protective foam sheet Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries For Customer Use Read carefully the information located at the bottom or rear of your DVD Video player and enter below the Serial No Retain this information for future reference Model No DVP 3126 Serial No 01 45_
16. TSC colour system It will change the video signal of a PAL disc and output it to NTSC format Multi Select this if the connected TV is compatible with both NTSC and PAL multi system The output format will be in accordance with the video signal of the disc Select a setting and press OK gt Follow the instructions show on the TV to confirm the selection if any Changing NTSC to PAL 1 Ensure your TV system supports PAL Standard 2 lf there is a distorted picture on the TV wait 15 seconds for automatic recover Yes no J Confirm again to use new setting Revert to original setting in 14 seconds acca M Press lt to highlight Yes and press OK to confirm To reset to default TV color system Wait for 15 seconds for the auto recovery OR Press OPEN CLOSE A on the DVD player to open the disc tray Press numeric keypad 3 on the remote control for few seconds gt The DVD background menu appears Tips Before changing the current TV colour setting ensure that your TV supports the selected TV System If there is no proper picture on your TV wait for 15 seconds for auto recovery Select PAL for Asia Pacific region Select NTSC for Taiwan region TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 18 01 45_dvp3126_94 engl indd 18 2007 01 31 2 20 38 PM Getti
17. Tel No Dealer s Name Location amp Tel No Dealer s Stamp amp Sign Philips Electronics India Limited Registered Office 7 Justice Chandra Madhab Road Kolkata 700 020 Head Office 2 Floor Technopolis Knowledge Park Nelco Complex Mahakali Caves Road Chakala Andheri East Mumbai 400093 Maintenance Tips for your DVD Player e Always keep a Disc loaded in your DVD Player tray Keep the player away from the dusty areas Keep it covered with a dust cover e Clean your DVD Player Lens after every 20 discs played o Use the 2 brush Philips DVD Lens Cleaner SVC2520 for best results Clean the CDs VCD DVD MP3 CD before inserting in your DVD Player For unlimited listening pleasure use Philips earphones headphones Over 20 models to choose from For any sales or service related queries Visit us on web at www philips com or Call us on Toll Free Number 600 22 44 22 01 45_dvp3126_94 engl indd 44 2007 01 31 2 20 42 PM Meet Philips at the Internet http www philips com support Be responsible Respect copyrights ao DVP 3126 CLASS 1 LASER PRODUCT PHILIPS m S SgpSL 0705 94 2 01 45_dvp3126_94 engl indd 45 2007 01 31 2 20 43 PM
18. a subwoofer is connected Digital Output Select this if you connect to a multichannel decoder receiver In Audio press A to select Digital Output then press P All Select this if the connected device has a built in multichannel decoder that supports one of the multichannel audio None i Select this option when no subwoofer is format Dolby Digital MPEG 2 connected PCM Select this if the connected device is not capable of decoding multichannel audio The DVD player will convert the Dolby Digital and MPEG 2 multichannel signals to PCM Pulse Code Modulation Off To deactivate the digital audio output For example if you use the FRONT L R AUDIO OUT sockets to connect to a TV or stereo system Use A Y to select a setting and press OK to confirm Use A to select a setting and press OK to confirm Tips If Digital Output is set to All all audio settings except MUTE are invalid If Digital Output is set to All while playback MPEG MP3 WMA files the player will output PCM signals TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 33 01 45_dvp3126_94 engl indd 33 2007 01 31 2 20 41 PM DVD Menu Options continued Night Mode This mode optimizes playback of sound at low volume High volume outputs will be softened and low volume outputs are brought u
19. ake sure the AC outlet has power Remote control does not work Aim the remote control directly at the sensor on the front of the DVD player not towards TV Remove any obstacles between DVD player and the remote control Batteries are weak replace the batteries Check the polarities of the batteries are as indicated on the remote control signs No picture Turn on your TV and set to the correct Video In channel for the DVD player You may go to Channel on your TV then press the channel down button on your TV s remote control until you see the TV program Check the video connection between the DVD player and the TV The picture is distorted or black amp The disc does not match with the TV color system standard white during playback PAL NTSC The disc is dirty clean the disc Sometimes a small amount of picture distortion may appear This is not a malfunction To deactivate progressive scan function manually Turn off your TV progressive scan mode or set to interlaced mode Press OPEN CLOSE to open the DVD player disc tray Press the alphanumeric keypad I for few seconds w Sa No sound Check the audio connections the red and white jacks are connected correctly Set the Digital output correctly based on the equipment you connected to the DVD player Disc does not play ee the disc with the label facing up rong region code Wrong disc type
20. at your chosen starting point Press lt gt to highlight Rep off then press Press OK again at your chosen end point OK repeatedly to select the following repeat options For DVD Repeat Chapter currently playing chapter Repeat Title currently playing title Off cancel For Video CD Audio CD Repeat Single currently playing track Repeat All entire disc Off cancel For MP3 WMA Repeat Single currently playing file Repeat All current folder Off cancel For JPEG Repeat Single currently playing file Repeat All current folder Off cancel Tip For VCD repeat playback is not possible if the PBC mode is switched on gt The section A and B can be set only within the same chapter track gt The section will now repeat continuously To exit the sequence press OK TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 01 45_dvp3126_94 engl indd 23 23 2007 01 31 2 20 40 PM Playback Features continued Viewing the disc playback information When Time information appears on the L _ ___ ___ TV screen press OK to access You can view the disc information such Use the alphanumeric keypad 0 9 to as current title chapter track number input the valid time such as 0 34 27 total elapsed time or playing time on t
21. ch 3x Video Output Cinch yellow Audio Output L R Cinch white red Digital Output coaxial IEC60958 for CDDA LPCM IEC61937 for MPEG 1 2 Dolby Digital 6 channal analog output Audio Front L R Clinch white red Audio Rear L R Clinch white red Audio Center Clinch blue Audio Subwoofer Clinch black CABINET Dimensions w x h x d 360 x 38 x 209 mm Weight Approximately 2 kg POWER CONSUMPTION Power Supply Rating 10V 240V 50 60Hz Power consumption lt 10W Power consumption in lt 1 W Standby mode 2007 01 31 2 20 42 PM Glossary Analog Sound that has not been turned into numbers Analog sound varies while digital sound has specific numerical values These jacks send audio through two channels the left and right Aspect ratio The ratio of vertical and horizontal sizes of a displayed image The horizontal vs vertical ratio of conventional TVs is 4 3 and that of wide screens is 16 9 AUDIO OUT Jacks Jacks on the back of the DVD System that send audio to another system TV Stereo etc Bit Rate The amount of data used to hold a given length of music measured in kilobits per seconds or kbps Or the speed at which you record Generally the higher the bit rate or the higher the recording speed the better the sound quality However higher bit rates use more space on a Disc Chapter Sections of a picture or a music piece on a DVD that are smaller than titles A title is composed of s
22. confirm gt If you select PBC ON the disc menu if available will appear on the TV Changing the Audio Language gt Use the PREV 4 NEXT Pl to turn to previous page page or use the For DVD alphanumeric keypad 0 9 to select a Press AUDIO repeatedly to select play option different audio languages During playback gt pressing PREV HM after the first 5 Changing the Audio Channel seconds playback will start from the For VCD beginning of the current track Press AUDIO to select the available gt pressing PREV lt within the first 5 audio channels provided by the disc seconds playback will go to the LEFT RIGHT MIX STEREO previous track During playback pressing RETURN Subtitles TITLE will return to the menu screen if Press SUBTITLE repeatedly to select PBC is on different subtitle languages If you want to skip the index menu and playback directly from the beginning Press DISC MENU key on the remote control to turn to PBC off TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 25 01 45_dvp3126_94 engl indd 25 2007 01 31 2 20 40 PM Playback Features continued Playing MP3 WMA JPEG Kodak Fuji Picture CD IMPORTANT You have to turn on your TV and set to the correct Video In channel See page 16 Finding your viewing channel Load a disc gt The disc reading time may
23. cratches and clean with a soft playback cloth wiping from center to edge Unable to select Progressive Scan on Check that the output of the video signal is turn to off Interlaced Need Help Visit us at www philips com support 41 01 45_dvp3126_94 engl indd 41 2007 01 31 2 20 42 PM Specifications TV STANDARD PAL 50Hz NTSC 60Hz Number of lines Playback 625 525 Multistandard PAL NTSC VIDEO PERFORMANCE Video DAC YPbPr Video Output 12 bit 108 MHz 0 7 Vpp 75 ohm Vpp 75 ohm VIDEO FORMAT Digital MPEG 2 for DVD SVCD Compression MPEG for VCD DVD 50Hz 60Hz Horiz resolution 720 pixels 720 pixels Vertical resolution 576 lines 480 lines vcD 50Hz 60Hz Horiz resolution 352 pixels 352 pixels Vertical resolution 288 lines 240 lines AUDIO FORMAT Digital MPEG AC 3 compressed PCM Digital 16 20 24 bits fs 44 1 48 96 kHz MP3 ISO 9660 96 112 128 256 320kbps amp variable bit rate fs 32 44 1 48 kHz Analog Sound Stereo Dolby Surround compatible downmix from Dolby Digital multi channel sound 42 01 45_dvp3126_94 engl indd 42 AUDIO PERFORMANCE DA Converter 24 bit 192 kHz DVD fs96 kHz 4Hz 44kHz fs48 kHz 4Hz 22kHz SVCD fs48 kHz 4Hz 22kHz fs 44 1kHz 4Hz 20kHz CD VCD fs 44 1kHz 4Hz 20kHz Signal Noise IkHz gt 90 dB Dynamic range 1 kHz gt 80 dB Crosstalk I kHz gt 70 dB Distortion noise 1 kHz gt 65 dB MPEG MP3 MPEG Audio L3 CONNECTIONS YPbPr Output Cin
24. creen 16 9 Select this for Misc Press A to select Video then ress P P wide screen TV Press A to select an item then press frame ratio P to access 16 9 Example TV System gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A Y to select a setting and press OK to confirm Use A F to select a setting and press OK to confirm Example PAL gt The setting is selected and setup is complete To exit press SETUP TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 29 01 45_dvp3126_94 engl indd 29 2007 01 31 2 20 40 PM DVD Menu Options continued Use view mode to scale an image that fits to the TV screens width and height In Video press A V to select View Mode then press P Fill Select this to scale the image up or down in horizontal and vertical directions respectively to fill the screen height and width Original Select this to fit the original screen size only for MPEG Height Fit Select this to scale the image up or down in vertical direction to fit the screen height Width Fit Select this to scale the image up or down in horizontal direction to fit the screen width Auto
25. cture of sound tracks having three or more channels Parental Control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country The limitation varies from disc to disc when it is activated playback will be prohibited if the software s level is higher than the user set level PCM Pulse Code Modulation A system for converting analog sound signal to digital signal for later processing with no data compression used in conversion Playback control PBC Refers to the signal recorded on video CDs or SVCDs for controlling reproduction By using menu screens recorded on a Video CD or SVCD that supports PBC you can enjoy interactive type software as well as software having a search function Progressive Scan It displays all the horizontal lines of a picture at one time as a signal frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution Region code A system for allowing discs to be played back only in the region designated beforehand This unit will only play discs that have compatible region codes You can find the region code of your unit by looking on the product label Some discs are compatible with more than one region or ALL regions Title The longest section of a picture or music feature on DVD music etc in video software
26. dvp3126_94 engl indd 4 Laser Safety This unit employs a laser Due to possible eye injury only a qualified service person should remove the cover or attempt to service this device NOTE Pictures shown maybe different between countries CAUTION WARNING LOCATION ON THE BACKPLATE OF THE SET NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners LASER Type Semiconductor laser InGaAIP DVD AlGaAs CD 658 nm DVD 790 nm CD Output Power 7 0 mW DVD 10 0 mW VCD CD Beam divergence 60 degrees Wave length 2007 01 31 2 20 36 PM Language Code Abkhazian Afar Afrikaans Amharic Arabic Armenian Assamese Avestan Aymara Azerhaijani Bahasa Melayu Bashkir Belarusian Bengali Bihari Bislama Bokmal Norwegian Bosanski Brezhoneg Bulgarian Burmese Castellano Espa ol Catalan Chamorro Chechen Chewa Chichewa Nyanj Ax Chuang Zhuang Church Slavic Slavonic Chuvash Corsican Cesky Dansk Deutsch Dzongkha English Esperanto Estonian Euskara EMnvik Faroese Fran ais Frysk Fijian Gaelic Scottish Gaelic Gallegan Georgian Gikuyu Kikuyu Guarani Gujarati Hausa Herero Hindi Hiri Motu Hrwatski Ido Interlingua International Interlingue Inuktitut 01 45_dvp3126_94_engl indd 5 Inupiaq Iri
27. e to enter your four digit password see page 36 For more playback features see pages 21 27 Tips Do not overturn the DVD player while disc loading playing or ejecting Do not close the disc tray manually even if the power switched off Basic playback controls Unless otherwise stated all operations described are based on Remote Control use Pausing playback During playback press PLAY PAUSE ll to pause playback and display a still picture gt Sound will be muted To resume normal playback press PLAY PAUSE Pill again Selecting title chapter track Press PREV M NEXT Pl to go to the previous or next title chapter track Press DISPLAY to display the disc information text line for title chapter track example 00 08 Use alphanumeric keypad 0 9 to enter valid title chapter track number then press OK gt The playback skips to the selected title chapter track Stopping playback Press STOP E Tips Screen saver will start automatically if the disc playback is stopped for about 5 minutes The player will automatically switch to Power Standby mode if you do not press any buttons for about 5 minutes after the disc has stopped playing TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 01 45_dvp3126_94 engl indd 21 21 2007 01 31 2 20 39 PM Playback Features
28. e underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 37 01 45_dvp3126_94 engl indd 37 2007 01 31 2 20 41 PM DVD Menu Options continued Volume Control In Misc press A W to select Volume 60 Press lt P to adjust the speaker s volume that best suits your personal preference gt The range from 0 63 Press A YF then press lt 4 P to adjust the volume corresponding speakers from 0 15 OR You can also press VOLUME on the remote control to display the speaker s volume level on the TV screen Press lt 4 P to adjust the speaker s volume level Press OK or VOLUME to exit Tip The display will disappear if no buttons are press within 5 seconds Speaker Delay Delay times setting are related to the listening position or distance for center and surround speakers In Misc press A W to select Center Sprk Delay or Surr Sprk Delay then press OK Use A to move the slider to adjust the delay times of the audio output from the corresponding speakers TIPS The underlined option is the factory default setting Press lt 4 to go back to previous menu item Press SETUP to exit the menu item 38 01 45_dvp3126_94 engl indd 38 2007 01 31 2 20 42 PM Others Software upgrade Periodically Philips will issue software upgrade to enhance your user experience IMPORTANT
29. everal chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Component Video Out Jacks Jacks on the back of the DVD System that send high quality video to a TV that has Component Video In jacks R G B Y Pb Pr etc Disc menu A screen display prepared for allowing selection of images sounds subtitles multi angles etc recorded on a DVD Digital Sound that has been converted into numerical values Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks These jacks send audio through multiple channels instead of just two channels as analog does Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right center and subwoofer JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group or MPEG 1 Audio Layer 3 By using MP3 format one CD R or CD RW can contain about 10 times as much data volume as a regular CD can 01 45_dvp3126_94 engl indd 43 Multichannel DVD is specified to have each sound track constitute one sound field Multichannel refers to a stru
30. exceed 30 seconds due to the complexity of the directory file configuration gt The data disc menu and ID3 MP3 Meta data WMA information including at least title singer and album appears on the TV screen Filter Repeat _ Off TAKE ME TO YOUR E Album Year Comment Press A to select the folder and press OK to open the folder Press A Y to select a track file Press OK to confirm Tips If the playing file is not selected the ID3 Meta information will disappear If a jpeg file is selected a preview will appear Playback selection During playback you can Press PREV IM NEXT Pl to select the previous next track file in the current folder Press A V lt 4 P on the remote to rotate flip the picture files Press PLAY PAUSE Pll repeatedly to pause resume playback For MP3 WMA During playback gt pressing PREV J lt after the first 5 seconds playback will start from the beginning of the current track gt pressing PREV lt within the first 5 seconds playback will go to the previous track During playback press and hold PREV 4 NEXT Pl for about few seconds to access fast forward or fast reverse with the required speed 2X 4X 8X 16X or 32X Tip For MP3 WMA fast forward or fast reverse is available only when pressing PI for few seconds or more TIPS The operating features described here might not be possible for certain discs Al
31. gs TIPS The underlined option is the factory default setting Press lt q to go back to previous menu item Press SETUP to exit the menu item 19 01 45_dvp3126_94_engl indd 19 2007 01 31 2 20 39 PM Playback from Disc IMPORTANT If the INVALID KEY appears on the TV screen when a button is pressed it means the function is not available on the current disc or at the current time DVD discs and players are designed with regional restrictions Before playing a disc make sure the disc is for the same zone as your player Playable discs Using this DVD player you can playback on the following discs DVD Video Digital Versatile Disc VIDEO DVD RW DVD Rewritable Audio Video format or MP3 WMA JPEG files LENE Re itabi DVD R DVD Recordable Audio Video format or MP3 WMA JPEG files ae CD R CD Recordable dew Audio Video format or MP3 WMA JPEG files CD RW CD Rewritable COMPACT Audio Video format or a MP3 WMA JPEG files ReWritable Audio CD Compact Disc rp Digital Audio DIGITAL AUDIO Video CD COMPACT Formats 1 0 1 1 2 0 ais Super Video CD MP3 Disc MP3 WMA tracks aise SUPER VIDEO Supported formats The file extensions has be to be mp3 wma JPEG ISO format Maximum 5 characters display Supported sampling frequencies and corresponding bit rates 32kHz 64 320 kbps 44 1
32. he Press OK to confirm disc without interrupting the disc gt The playback skips to the chosen playback ime During playback press DISPLAY repeatedly on the remote control gt The available disc information appears When Angle inf ti on the TV screen with the following o en Anae Infermavon appears oh the TV screen press lt 4 gt to highlight sequence Angle Title Chapter DVD Press OK repeatedly to switch between different angle Time gt Playback will go to the selected angle DvD Track CZE vo Time EDET vo Title Chapter Track selection Press 4 P to select Title Chapter or Track then press OK to access Use the alphanumeric keypad 0 9 to input a valid number Press OK to confirm gt The playback skips to the chosen title chapter track TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 24 01 45_dvp3126_94 engl indd 24 2007 01 31 2 20 40 PM Playback Features continued Special DVD Features Special VCD and SVCD Feature Playing aTitle Press DISC MENU Playback Control PBC gt The disc title menu appears on the TV For VCD with Playback Control screen PBC feature version 2 0 only Use A V lt 4 P keys or alphanumeric Press DISC MENU to toggle between keypad 0 9 to select a play option PBC ON and PBC OFP Press OK key to
33. he required speed 1 2 1 4 1 8 or 1 16 forward or backward gt Sound will be muted To return to normal speed press PLAY PAUSE Pil Forward Reverse Searching You can fast forward or fast reverse a disc during playback and select a desired search speed For DVD VCD SVCD CD Press 4 P directly or press 14 Pl for 2 seconds during playback to select the required speed 2X 4X 8X 16X or 32X backward or forward gt Sound will be muted DVD VCD or intermittent CD To return to normal speed press PLAY PAUSE Pil Tip For CD fast forward or fast reverse is available only when pressing 14 Pl for few seconds or more TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 22 01 45_dvp3126_94 engl indd 22 2007 01 31 2 20 39 PM Playback Features continued Selecting various repeat functions Repeat play mode The repeat play options vary depending on the disc type While playing a disc press REPEAT REPEAT A B gt The menu appears on the TV screen Repeating a section within a chapter track You can repeat the playback of a specific segment within a title chapter track To do this you must mark the start and end of the segment you want While playing a disc press REPEAT REPEAT A B gt The menu appears on the TV screen Press lt P to highlight A B off then press OK
34. ible to play CD R RW or DVD R RW in all cases due to the type of disc or condition of the recording If you are having trouble playing a certain disc remove the disc and try a different one Improper formatted disc will not played on this DVD player Region Discs that can be played U S A and Canada regions Remote control and two AAA batteries U K and Europe regions PHILIPS DVD PLAYER Asia Pacific Taiwan Korea Australia New Zealand Latin America Russia and India regions China Calcos Islands Walls and Futuna Islands 01 45_dvp3126_94 engl indd 9 2007 01 31 2 20 36 PM Connections Connecting to television IMPORTANT You only need to make one video connection from the following options depending on the capabilities of your television Connect the DVD player directly to the television Using Composite Video jacks CVBS Use the composite video cable yellow to connect the DVD player s TV OUT CVBS jack to the video input jack or labeled as A V In Video In Composite or Baseband on the television cable supplied To hear sound of this DVD player through your television use the audio cables white red to connect FRONT L R AUDIO OUT jacks of the DVD player to the corresponding AUDIO IN jacks on the television cable supplied IMPORTANT The progressive scan video quality is only possible when
35. jack on the RF modulator It may have been connected to your TV Use the composite video cable yellow previously Disconnect it from the TV to connect the DVD player s TV OUT CVBS jack to the video input jack on the RF modulator Use the RF coaxial cable not supplied to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the television TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet 01 45_dvp3126_94 engl indd 11 2007 01 31 2 20 37 PM Connections continued Connecting the power cord Connecting to a Multi Channel Receiver After everything is connected Receiver has a Dolby Digital properly plug in the AC power cord decoder to the power outlet Never make or change any connections Select one of the video connections with the power switched on CVBSVIDEO IN or COMPONENT VIDEO IN depending on the options When no disc is loaded press available on your television STANDBY ON on the DVD player Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input jacks on your receiver cable not supplied Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your receiver cable not supplied front panel may appear on the display panel TIPS Before making or changing any connectio
36. kHz 48kHz 80 320 kbps JPEG pictures The file extensions has be to be JPG and not JPEG JPEG ISO format It can only display DCF standard still pictures or JPEG pictures such as TIFF Tips Maximum 100 sessions for CD and 10 multi border for DVD are supported For DVD R and DVD RW multi border only finalized disc are supported For DVD R and DVD RW multi border both finalized and unfinalized disc are NOT supported TIPS Some discs cannot be played on this DVD player due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 20 01 45_dvp3126_94 engl indd 20 2007 01 31 2 20 39 PM Playback Features Starting disc playback Turn on the TV to the correct program number for the DVD player e g EXT AV Press STANDBY ON C to turn on the DVD player Press OPEN CLOSE on the front of the DVD player You can also hold down the STOP E button on the remote control to open and close the disc tray Place a disc into the disc tray with the label facing up then press OPEN CLOSE 4 gt For double sided discs load the side which you want to play facing up Playback may start automatically If not press PLAY PAUSE Pll Ifa disc menu appears on the TV see page 22 Using the Disc Menu If the child lock was activated for the inserted disc you hav
37. ly until you see the Video In channel gt Or the TV remote control may have a button or turn that chooses different video modes Insert two batteries type RO3 or AAA following the indications inside the compartment Close the cover Remove batteries if they are exhausted or if the remote is not to be used for a long time Do not use old and new or different types of batteries in gt Or set the TV to channel 3 or 4 if combination you are using an RF modulator Batteries contain chemical If you are using external equipment such substances so they should be as audio system or receiver turn it on disposed of properly and select the appropriate input source for the DVD player output Refer to the Using the remote control to equipment user s manual for detail operate the system Aim the remote control directly at the remote sensor IR on the front panel Do not put any objects between the remote control and the DVD player while operating the DVD player 16 01 45_dvp3126_94 engl indd 16 2007 01 31 2 20 38 PM Getting Started continued Step 3 Setting up Progressive Scan feature for Progressive Scan TV only The progressive scan displays twice the number of frames per seconds than interlaced scanning ordinary normal TV system With nearly double the number of lines progressive scan offers higher picture resolution and quality Before you start E
38. ng Started continued oe aan a Audio Subtitle and DVD menu Step 5 Setting the language languages You can choose your preferred language or sound track from audio subtitles and DVD menu languages If the selected language is not available on the disc the disc s default language will be used On screen display OSD language instead Select this to change the language of this DVD player screen display menu The language options are different depending on your country or region It may not correspond to the illustrations shown on the user manual _ OSD language English The menu language on screen display pe subtitie Auto for the system will remain as you set it i Audio gt DVD menu Hindi Language OSD language Subtitle Hindi Rating Video Audio Misc DVD menu f Audio ae Press SETUP Misc Press A to select Language then press P Press A to highlight one of the Press SETUP options below then press P Press A Y to select Language then Audio press P Select this to change disc sound track Press A to select OSD Language language then press P Subtitle Use A Y to select a language and press Select this to change the subtitle language OK to confirm DVD menu Select this to change the language of the disc menu Use A to select a language and press OK to confirm Repeat steps for other language settin
39. ns make sure that all the devices are disconnected from the power outlet 12 01 45_dvp3126_94 engl indd 12 2007 01 31 2 20 37 PM Optional connections Connecting to a stereo system Connecting to a digital AV receiver AV Receiver Stereo system has right left Audio In jacks Select one of the video connections CVBS VIDEO IN or COMPONENT VIDEO IN depending on the options available on your television Use the audio cables white red to connect FRONT L R AUDIO OUT jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system cable supplied Receiver has a PCM Dolby Digital or MPEG decoder Select one of the video connections CVBS VIDEO IN or COMPONENT VIDEO IN depending on the options available on your television Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your receiver cable not supplied Set the DVD player s digital output to PCM Only or ALL depending on the capabilities of your receiver see page 33 Digital Output Tip If the audio format of the Digital Output does not match the capabilities of your receiver the receiver will produce a strong distorted sound or no sound at all TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet 01 45_dvp3126_94 engl indd 13 13 2007 01 31 2 20 37 P
40. nsure that you have connected this DVD player to a progressive scan TV using the Y Pb Pr connection see page 10 Ensure that you have completed the basic installation and set up Turn on your TV and set to interlace mode refer to your TV user manual Press STANDBY ON C on the remote control to turn on the DVD player Select the correct video in channel gt The DVD background menu appears Press SETUP Press A to select Video then press P Language psn View Mode G Video TV System Video Out _ Interlaced Audio Smart Picture P Scan Rating Misc O Press A YW repeatedly to select Video Out then press P TIPS The underlined option is the factory default setting Select P Scan then press OK to confirm gt The menu will appear on the TV Activating Progressive Scan 1 Ensure your TV system supports Progressive Mode 2 If there is a distorted picture on the TV wait 15 seconds for automatic recover Eee m Press lt to highlight Yes and press OK to confirm urn on your rogressive scan mode OT your TV prog d refer to your TV user manual gt The menu will appear on the TV Confirm again to use new setting Revert to original setting in 14 seconds Ga ts Press lt to highlight Yes and press OK to confirm gt The setup is now completed and you can start enjoy the high quality picture To deactivate Progres
41. nt overheating 5cm 2 0 5cm 2 0 Avoid high temperatures moisture water and dust Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus such as liquid filled objects lighted candles 01 45_dvp3126_94 engl indd 8 Cleaning discs Some problems occur because the disc inside the player is dirty frozen picture sound disruptions picture distortions To avoid these problems discs should be cleaned on a regular basis To clean a disc use a micro fibre cleaning cloth and wipe the disc from the center to the edge in a straight line CAUTION Do not use solvents such as benzene thinner commercially available cleaners or anti static sprays intended for analog discs Since the optical unit laser of the DVD player operates at a higher power than regular DVD or CD players cleaning CDs intended for DVD or CD players may damage the optical unit laser Therefore refrain from using a cleaning CD 2007 01 31 2 20 36 PM General Information Accessories supplied Region codes This DVD player is designed to support the Region Management System Check the regional code number on the disc package If the number does not match the player s region number see table below the player may be unable to playback the disc Composite video cable yellow and Audio cables white red Tips It may not be poss
42. nter New Password Press OK to confirm TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 36 01 45_dvp3126_94 engl indd 36 2007 01 31 2 20 41 PM DVD Menu Options continued SS Using the Misc Setting the Default function will reset all options and your personal settings to the factory defaults except your password for rating level Miscellaneous setup menu Press SETUP on the remote control gt The system setup menu appears In Misc press A WV to select Use Default Settings then press OK gt The menu will appear Language Use Default Settings Volume ee 6 Video Left es d5 Right r Dye j 15 en 15 ae Yes 115 No Delay Select this to reset to factory default v settings No Press A Y to select Misc then press Select this to close the menu gt Use lt P to select a setting and press Press A to select an item then press OK to confirm OK to access Example Use Default Settings gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A Y to select a setting and press OK to confirm Example No gt The setting is selected and setup is complete To exit press SETUP TIPS Th
43. o go back to previous menu item Press SETUP to exit the menu item 35 01 45_dvp3126_94 engl indd 35 2007 01 31 2 20 41 PM DVD Menu Options continued Use A Y to select a rating level and press OK to confirm gt Select 8 Adult to disable parental level and allow all discs to play DVDs that are rated higher than the level you selected will not play unless you enter your four digit password Tips This feature will not limit viewing if the disc manufacturer did not code the disc VCD SVCD CD have no level indication so parental control has no effect on these type of discs This also applies to most illegal DVDs Some DVDs are not coded with a rating though the movie rating may be printed on the disc cover The rating level feature does not prohibit play of such discs Changing the Password You need to enter your four digit password to play a prohibited disc or if prompted for a password In Rating press A W to select Set Password then press OK gt You will be prompted to enter your four digit password Enter Password Use the alphanumeric keypad 0 9 to enter the four digit password gt When doing this for the first time enter the default password 0000 If you forget your old four digit password enter the default password 0000 Press OK again to enter the new four digit password gt The new four digit password will now take effect E
44. pward to an audible level In Audio press A to select Night Mode then press P On Select this to set low volume output This feature is only available for movie discs with Dolby Digital mode Off Turns off night mode feature Select this to enjoy the surround sound with its full dynamic range Use A Y to select a setting and press OK to confirm Down Sampling You can enable and disable the digital signal for better sound output quality In Audio press A to select Down Sampling then press P On Playback a disc recorded at the sampling rate of 48kHz Off Playback a disc recorded at the sampling rate of 96kHz This rate can only be achieved in Stereo Classic Flat mode Use A Y to select a setting and press OK to confirm TIPS The underlined option is the factory default setting Press lt to go back to previous menu item Press SETUP to exit the menu item 34 01 45_dvp3126_94 engl indd 34 2007 01 31 2 20 41 PM DVD Menu Options continued Depending on the DVD you may be asked to change the parental level while Press SETUP on the remote control playing the disc The rating levels are gt The system setup menu appears from to 8 and are country dependent You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes Using the Rating setup menu
45. scellaneous setup menu 37 38 Restoring to the original Stein gs cctessctecatssscectsssssssstpreereiesvacencatstoccaisancssansvsiveosabassmnantienacaateas 37 Volume Controls 38 Speakers Delay nsssssssssasssasssocsassssascassssscossisastasssaacosesassedsnaascasuaassceteasseasccassioadasstaasousdabicadeowstansoassbisssaseeaeosd 38 Software upgrade Troubleshooting 40 41 Specifications e 42 Glossary 00 43 7 01 45_dvp3126_94 engl indd 7 2007 01 31 2 20 36 PM Care and Safety Information DANGER High voltage Do not open the device You run the risk of getting an electric shock The machine does not contain any user serviceable parts Please leave all maintenance work to qualified personnel Setup Finding a suitable location Place the set ona flat hard and stable surface Do not place the set on a carpet Do not put any equipment or heavy objects on top of the set Do not position the set on top of other equipment that might heat it up such as receiver or amplifier Do not put anything under the set such as CDs magazines Install this unit near the AC outlet and where the AC power plug can be reached easily Space for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up Allow at least 10 cm 4 0 clearance from the rear and the top of the set and 5cm 2 0 from the left and right to preve
46. sh slenska Italiano Ivrit Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Kernewek Khmer Kinyarwanda Kirghiz Komi Korean Kuanyama Kwanyama Kurdish Lao Latina Latvian Letzeburgesch Limburgan Limburger Lingala Lithuanian Luxembourgish Macedonian Malagasy Magyar Malayalam Maltese Manx Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho Navajo Ndebele North Ndebele South Ndonga Nederlands Nepali Norsk Northern Sami North Ndebele Norwegian Nynorsk Occitan Provencal Old Bulgarian Old Slavonic Oriya Oromo Ossetian Ossetic Pali Panjabi Persian Polski Portugu s Pushto Russian Quechua Raeto Romance Romanian Rundi Samoan Sango Sanskrit Sardinian Serbian Shona Shqip Sindhi Sinhalese Slovensky Slovenian Somali Sotho Southern South Ndebele Sundanese Suomi Swahili Swati Svenska Tagalog Tahitian Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tonga Islands Tsonga Tswana T rk e Turkmen Twi Uighur Ukrainian Urdu Uzbek Vietnamese Volapuk Walloon Welsh Wolof Xhosa Yiddish Yoruba Zulu 2007 01 31 2 20 36 PM Contents eee Care and Safety Information Setup Cleaning discs General Information Accessories supplied Region codes Connections Connecting to television sssssscsscssssssssccssessserssssssessssssssscessessssecsscsssessscssssenes Using Composite Video jacks CVBS Using Component
47. sive Scan manually Wait for 15 seconds for the auto recovery OR Press OPEN CLOSE A on the DVD player to open the disc tray Press numeric keypad I on the remote control for few seconds gt The DVD background screen appears Tip There are some progressive scan TVs and High Definition TVs that are not fully compatible with this unit resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode In such a case turn off the progressive scan feature on both the DVD player and your TV Press lt 4 to go back to previous menu item Press SETUP to exit the menu item 0 1 45_dvp3126_94 engl indd 17 17 2007 01 31 2 20 38 PM Getting Started continued Step 4 Selecting the matching color system The color system of the DVD player disc and TV should match in order for the disc to play Before changing the TV system determine the color system of your TV Language Aspect Ratio View Mode Video TV System Video Out Audio Smart Picture Rating Misc Press SETUP Press A to select Video then press P Press A repeatedly to select TV System then press P Use A Y to select one of the options below PAL Select this if the connected TV has the PAL colour system It will change the video signal of an NTSC disc and output it to PAL format NTSC Select this if the connected TV has the N
48. soccosstsascatassscosessssosanssssssceussanechsssassovendbsonsedisssasanbaduschvetabscuaabisecieecasods 26 Playback selections sa ESE A E E RE 26 Zoompict re JPEG minei E E AAE E TAE 27 Playback with multi angles JPEG csicsssscssscscsssicsssaeassscassenssnsssassssoscasdovesavsssseasandscnesosisnnscassssesowteaoses 27 Using the Language setup Menu ccsscccssscsssscssseesscsssscesscessssssssssssssessssessseseesees 28 OSD Language cccscsissssssscsossssssesscassss 28 Subtitle AUdio DVD Menuiseries 28 Using the Video setup menu 29 31 Setting the Aspect Ratio lt aiscsssosscassssccsssicssssesssscosessesossnsvacdissactanscaestassoasssusoaueosssonsanssgusctustanscanesssconedeasons 29 View Mode 30 TV System 30 Video Out 30 Smart PICKUP sssscssssscsscssssssussccasesussscsessnssssnsassnsssenssstssennvsssbscsussssnovssssstseeassssenbsssibssusssstvassssszanssnssssenssstbseenes 31 Using the Audio setup menu 32 34 Front Center Surround Speaker S erasua EAGEN N 32 SUBWOOE F aan aan w33 Digital Output a33 Night Mode 34 Down Sain PUI ges ceasscssscocsssecetnsdsceatccsvcocdescesvovesstascesenasetaussvassdgescesbusedsscsceasasessussneaectsnansdespemmsaacetautsesteenioete 34 Using the Rating setup menu 35 36 Rating level settings u 135 36 Changing thie Password ss asscsssesscassseccossiasscassssecosecatsndsaaisassccustasetassvessoasshteocansieanssaabscacsabstanscassoiascasc asous 36 Using the Misc Mi
49. ss P to access Example Night Mode gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A Y to select a setting and press OK to confirm Example On gt The setting is selected and setup is complete To exit press SETUP TIPS The underlined option is the factory default setting Front Center Surround Speakers You can adjust the volume level setting for individual speakers In Audio press A YW to select Front Speakers Center Speaker or Surround Speakers then press P Large When connected speakers except for subwoofer can produce low frequency signals below 20Hz gt The range from 20Hz to 20KHz Small When connected speakers except for subwoofer can not produce low frequency signals below 20Hz gt The range from 20Hz to 20KHz None No sound output from the speakers Only applicable for center and rear speakers Use A to select a setting and press OK to confirm Press lt 4 to go back to previous menu item Press SETUP to exit the menu item 32 01 45_dvp3126_94 engl indd 32 2007 01 31 2 20 41 PM DVD Menu Options continued This option is only available for subwoofer connection In Audio press A to select Subwoofer then press P Present Select this option when
50. ways refer to the instructions supplied with the discs 26 01 45_dvp3126_94 engl indd 26 2007 01 31 2 20 40 PM Playback Features continued During playback press ZOOM repeatedly to display the picture with different scales Use A V lt 4 P to view the zoomed picture Playback with multi angles JPEG During playback press A V lt 1 P to rotate the picture on the TV screen A VY flip the picture vertically by 180 lt 4 rotate the picture anti clockwise by 90 gt rotate the picture clockwise by 90 Tip It may not be possible to play certain MP3 JPEG disc due to the configuration and characteristics of the disc or condition of the recording TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 27 01 45_dvp3126_94 engl indd 27 2007 01 31 2 20 40 PM DVD Menu Options This DVD Player setup is carried out via the TV enabling you to customize the DVD player to suit your particular requirement Using the Language setup menu Press SETUP on the remote control gt The system setup menu appears i Language OSD Language Subtitle z Video Audio DVD Menu Audio Rating Misc Press A Y to select Language then press P Press A to select an item then press P to access Example OSD Language gt The options for the selected item appears gt If the
Download Pdf Manuals
Related Search