D-Link DSL-320B ADSL2 Ethernet Modem
Contents
1. Ethernet Adapter with TCP IP Protocol Installed Internet Explorer v6 or later FireFox v1 5 or Safari 1 3 or above Windows 2000 XP Vista ink Click n Connect Utility re e e e e D D Link DSL 320B User Manual DSL 320B Section 1 Product Overview Features e PPP Point to Point Protocol Security The Modem supports PAP Password Authentication Protocol and CHAP Challenge Handshake Authentication Protocol for PPP connections The Modem also supports MSCHAP e DHCP Support Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network This eliminates the need to reconfigure every host whenever changes in network topology occur TCP IP Transfer Control Protocol Internet Protocol The Modem supports TCP IP protocol the language used for the Internet It is compatible with access servers manufactured by major vendors ATM Asynchronous Transfer Mode The Modem supports Bridged Ethernet over ATM RFC1483 and PPP over RFC 2364 Precise ATM Traffic Shaping Traffic shaping is a method of controlling the flow rate of data cells This function helps to establish the Quality of Service for ATM data transfer High Performance Very high rates of data transfer are possible with the Modem Up to 8 Mbps downstream bit rate using the G dmt standard e Telnet Connection The Telnet enables a network manager to access2. Security Protocol This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network Your Modem supports the PAP and CHAP protocols D Link DSL 320B User Manual 9 Section 2 Installation VPI Most users will not be required to change this setting The Virtual Path Identifier VPI is used in conjunction with the Virtual Channel Identifier to identify the data path between your ADSL service provider s network and your computer If you are setting up the Modem for multiple virtual connections you will need to configure the VPI and as instructed by your ADSL service provider for the additional connections This setting can be changed in the WAN Settings window of the web management interface VCI Most users will not be required to change this setting The Virtual Channel Identifier VCI used in conjunction with the VPI to identify the data path between your ADSL service provider s network and your computer If you are setting up the Modem for multiple virtual connections you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections This setting can be changed in the WAN Settings window of the web management interface Information you will need about DSL 320B Username This is the Username needed access the Modem s management interface When you attempt to connect to the device through a web browser you will be
3. LAN to Modem connection Be sure that the cable connecting the LAN to the Modem does not exceed 100 meters Hub or Switch to Modem Connection Connect the Modem to an uplink port MDI Il on an Ethernet hub or switch with a straight through cable If you wish to reserve the uplink port on the switch or hub for another device connect to any on the other MDI X ports 1x 2x etc with a crossed cable Computer to Modem Connection You can connect the Modem directly to a 10 100BASE TX Ethernet adapter card NIC installed on a PC using the Ethernet cable provided D Link DSL 320B User Manual 13 section 3 Configuration setup This section will show you how to set up and configure your new D Link Modem using the Web based configuration utility Web based Configuration Utility Connect to the Modem To configure the WAN connection used by the Modem it is first necessary to communicate with the Modem through its management interface which is HTML based and can be accessed using a web browser The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Modem The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client A DSL 320B Microsoft Internet Explorer To access the configuration utility open a web browser such as Internet Explorer and enter the IP address of the Modem 192 168 1 1 Edit View F
4. MR TTET C 27 PAPBNTALGONTROL eek 28 PRY IN 29 IUNSASETDUD 29 ADVANCED 30 31 SS Vy ORD 31 D Link DSL 320B User Manual SAVE RESTORE SUTIN 32 FIRMWARE UPDATE 33 34 omues ae 35 STATUS ees 36 FIN O oe ge eM CUL LM mM ic ey SOR PT ge N 36 CONNECTED Cle 37 SIATISTICS rer A 38 uec T e 39 TROUBLESHOOTING 40 NETWORKING BASICS 42 CHECK Y OUR IP ADDRESS 42 STATICALLY ASSIGN AN IP ADDRESS cccsccoccsccscoscoscoccaccscscascancecceccsccscancscsscescaecs 43 TECHNICAL SPECIFICATIONS 44 Section 1 Product Overview Package Contents DSL 320B ADSL Modem Power Adapter CD ROM with User Manual One twisted pair telephone cable used for ADSL connection One straight through Ethernet cable One Quick Installation Guide ADSL Modem Note Using a power supply with a different voltage rating than the one included with the DSL 320B will cause damage and void the warranty for this product System Requirements e ADSL Internet service e Computer with 200MHz Processor 64 Memory
5. Next button when you are finished to proceed to the next Setup Wizard window QUICK SETUP SELECT THE INTERNET CONNECTION TYPE If the following Setup Wizard window appears please select the connection type used by your ISP and then click the Next button Most users however will be sent directly to a Setup Wizard window for their specific Internet connection type based on the information entered in the previous Setup Wizard window D Link DSL 320B User Manual Please select your Country and ISP Internet Service Provider From the list below IF your Country or ISP is not in the list please select Other Country Click to select ISP Provider Click to select Select the connection type bo connect to your ISP Click to continue 9 PPPoE PPPoA Choose this option if your ISP uses most DSL users C3 Static IP Address Choose this option if your ISP uses Static IP assignments Bridge Mode Choose this option iF your ISP uses Bridge Mode 17 section 3 Configuration QUICK SETUP PPPOE PPPOA CONFIGURATION Type in the User Name and Password used to identify and verify your account to the ISP If you are instructed to change the VPI number provided by your ISP type in the correct setting in the available entry fields Most users will not need to change these settin
6. Static IP assignments Q Bridge Mode Choose this option if your ISP uses Bridge Mode STATIC IP ADDRESS INTERNET CONNECTION TYPE Enter the static address information provided by your Internet Service Provider ISP IP Address fs Assigned by your ISP Subnet Mask Connection 1483 Routed IP LLC Default Gateway 192 1568 1 1 192 168 1 1 Preferred DNS Server Alternate DNS Server Apply Settings 23 section 3 Configuration Bridge Mode For Bridged connections it will be necessary for most users to install additional software on any computer that will use the Modem for Internet access The additional software is used for the purpose of identifying and verifying your account and then granting Internet access to the computer requesting the connection The connection software requires the user to enter the User Name and Password for the ISP account This information is stored on the computer not in the Modem To configure a Static IP Address WAN connection follow these steps 1 Choose the Connection Type from the drop down menu This defines both the connection protocol and encapsulation method used for your ADSL service The available options are 1483 Bridged IP LLC and 1483 Bridged VC Mux If you have not been provided specific information for this setting leave the default setting 2 f you are instructed to change the VPI or VCI values type in the values assigned for your accoun
7. get an Internet connection For ADSL ISP users please contact your ISP to make sure the service has been enabled connected by your ISP and that your ISP username and password are correct 5 What if my Modem can t be detected by running the installation CD Ensure the Modem is powered on Check that all the cables are firmly connected at both ends and all LEDs work correctly Ensure only one network interface card on your PC is activated Click on Start gt Control Panel gt Security Center to disable the firewall Note There is a potential security issue if the firewall is disabled on your PC Please remember to turn it back on once you have finished the whole installation procedure This will enable you to be able to surf the Internet without any problem D Link DSL 320B User Manual 41 Appendix Networking Basics Networking Basics Check Your IP Address After you install your new D Link adapter by default the TCP IP settings should be set to obtain an IP address from a DHCP server i e wireless Modem automatically To verify your IP address please follow the steps below Click on Start gt Run In the run box type cmd and click on the OK At the prompt type ipconfig and press Enter C WINDOWS system32 cmd exe Microsoft Windows Version 5 1 2688 lt C gt Copyright 1985 2001 Microsoft Corp This will display the IP address subnet mask and the default gateway of YOur adapter C Do
8. have configured the Modem to your satisfaction it is a good idea to back up the configuration file to your computer To save the current configuration settings to your computer click the Save button You will be prompted to select a location on your computer to put the file The file type is bin and may be named anything you wish To load a previously saved configuration file click the Browse button and locate the file on your computer Click the Upload Settings button to load the settings from your local hard drive Confirm that you want to load the file when prompted The Modem will reboot and begin operating with the configuration settings that have just been loaded To reset the Modem to its factory default settings click the Restore Device button You will be prompted to confirm your decision to reset the Modem The Modem will reboot with the factory default settings including IP settings 192 168 1 1 and Administrator password admin D Link DSL 320B User Manual Once the modem is configured you can save the configuration settings to configuration File an your hard drive You also have the option to load configuration settings ar restore the Factory default settings SAYE RESTORE CONFIGURATION Save Settings To Local Hard Drive Load Settings From Local Hard Drive fs Upload Settings Restore To Factory Default Settings 32 section 3 Configuration Firmware Update To access the Firmware Update window cli
9. will assign are from 192 168 1 2 to 192 168 1 254 Your computer or computers needs to be configured to obtain an IP address automatically that is they need to be configured as DHCP clients It is recommended that your collect and record this information here or in some other secure place in case you have to re configure your ADSL connection in the future Once you have the above information you are ready to setup and configure your DSL 320B ADSL Modem Device Installation The DSL 320B connects two separate physical interfaces an ADSL WAN and an Ethernet LAN interface Place the Modem in a location where it can be connected to the various devices as well as to a power source The Modem should not be located where it will be exposed to moisture or excessive heat Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard As with any electrical appliance observe common sense safety procedures The Modem can be placed on a shelf or desktop ideally you should be able to see the LED indicators on the front if you need to view them for troubleshooting D Link DSL 320B User Manual 11 Section 2 Installation Power on Modem The Modem must be used with the power adapter included with the device 1 Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Modem and plug the adapter into a suitable nearby power source 2 Depress the Power butto
10. P addresses There are two options for DHCP service e You can use the Modem as a DHCP server for your LAN e You can disable DHCP service and manually configure IP settings for workstations Computer Name MAC Address IP Address Expire Time D Link DSL 320B User Manual 25 section 3 Configuration You may also configure DNS settings when using the Modem in DHCP mode Advanced gt DNS Setup When Obtain DNS server address automatically is clicked under DNS Server Configuration on the DNS Setup window the Modem will automatically relay DNS settings to properly configured DHCP clients To manually enter DNS IP addresses click the Use the following DNS server addresses radio button and type Preferred DNS Server and Alternate DNS Server in the fields provided The manually configured DNS settings will be supplied to clients that are configured to request them from the Modem Follow the instructions below according to which of the above DHCP options you want to use When you have configured DHCP as you want click the Apply Settings button to commit the new settings Use the Modem for DHCP To use the built in DHCP server tick the Enable DHCP Server check box in the DHCP Server Settings Optional section if it is not already selected The IP address pool settings can be adjusted The DHCP IP Address Range starts with the lowest available IP address default 192 168 1 2 If you change the IP address of the Modem this will c
11. Plug one end of the cable into the ADSL port RJ 11 receptacle on the rear panel of the Modem and insert the other end into the RJ 11 wall socket If you are using a low pass filter device follow the instructions included with the device or given to you by your service provider The ADSL connection represents the WAN interface the connection to the Internet It is the physical link to the service provider s network backbone and ultimately to the Internet Connect Modem to Ethernet The Modem may be connected to a single computer or Ethernet device through 10BASE TX Ethernet port on the rear panel Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10 100 Mbps only When connecting the Modem to any Ethernet device that is capable of operating at speeds higher than 10Mbps be sure that the device has auto negotiation NWay enabled for the connecting port Use standard twisted pair cable with RJ 45 connectors The RJ 45 port on the Modem 15 a crossed port MDI X Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection When connecting the Modem directly to a PC or server use a normal straight through cable You should use a crossed cable when connecting the Modem to a normal MDI X port on a switch or hub Use a normal straight through cable when connecting it to an uplink MDI II port on a hub or switch The rules governing Ethernet cable lengths apply to the
12. USER MANUAL DSL 320B VERSION 1 0 4 LI NS NE UM XMJU7 T LI t gt lt EN E D Link BROADBAND Table of Contents Table of Contents TABLE ON DEN 2 PACIRNGIUCONTBNTS esa cu 3 SYSTEMURBEOUIRBMEBN ES 3 PDESIUBES t ho dic Ato LUE Lacer t LUE nue EE ET Oe des 4 HARDWARE oes 5 COTTE ee RT 5 enna 6 INSTALLATION 7 BEFORE Y OU 7 TNS TAL CATION INO EBS e dolet detegit db e 7 DESICEANSTAIEEATIONZ 11 Power on hei dus deed 12 INCSCLDULLON Gabi c or 2 Network CONNECTHIONS cccccccccccccacceccuccscaccacceccucuscaecucsscascaecescncascuscassecescaucasencencans 13 SETUP 14 Web based Configuration Utility eee bae easet bts ee ba e edes 14 QOUICK SF PUR Uu ioter edet idus cn fne 15 PADS P dt ine bees 2l TT PROB PPPOdzu tun tutta e EA AAD PE 22 Ne 01 2E 23 1514171 EMOJ O TS 24 IAN SETUP Ue Moser uec iL IE 25 Use The Modem fOr PHCP nodu 26 PTSD CANOLA 26 FIMEAND DATE
13. avorites Tools Help M gt x E Address http 192 168 1 1 Type admin for the User Name and admin in the Password field If you get a Page Cannot be Displayed error please refer to the Troubleshooting section for assistance Log in to the modem BROADBAND D Link DSL 320B User Manual section 3 Configuration Quick Setup This chapter is concerned with using your computer to configure the WAN connection The following chapter describes the various windows used to configure and monitor the Modem including how to change IP settings and DHCP server setup QUICK SETUP Click the Setup Wizard link at the top of the window of the Modem s opening page to launch a series of setup windows Alternatively you can tick the Manual Setup check box and click the desired setting option radio button in the middle of the window The manual ADSL connection setup is described later in this manual The Modem allows you to change the Web manager s language settings using the drop down menu on the left side of the window The choices are English Spanish French Italian and German Please note that in some markets only English is supported at this time D Link DSL 320B User Manual DSL 320B SETUP ADYANCED MAINTENANCE STATUS HELP ADSL Setup LAN Setup If you are configuring this device for the first time we recommend that you click the Setup Wizard button and Follow the ins
14. c IP Address Choose this option if your ISP uses Static IP assignments Bri Choose this option if your ISP uses Bridge Mode Please take care when Bridge Mode iit uses RIO 3 entering your username and password as these are case sensitive The majority onnection issues are caused by incorrect username or password combinations PPPOE PPPOA INTERNET CONNECTION TYPE Enter the information provided by your Internet Service Provider ISP Username Password Service Name Connection Type PPPoE LLC MTU Idle Time Out Minutes 0 Always BROADBAND 21 section 3 Configuration PPPoE PPPoA To configure a PPPoE or PPPoA type WAN connection follow these steps 1 Type the Username and Password used for your ADSL account A typical User Name will be in the form user1234 isp co uk The Password may be assigned to you by your ISP or you may have selected it when you set up the account with your ISP The Service Name field is used for the name of your Internet Service Provider This is optional Choose the Connection Type from the drop down menu This defines both the connection protocol and encapsulation method used for your ADSL service The available options are PPPoE LLC PPPoE VC Mux PPPoA LLC and PPPoA VC Mux If you have not been provided specific information for the Connection Type setting leave the default setting Leave the MTU value at the default sett
15. ck the Firmware Update button in the Maintenance directory Use this window to load the latest firmware for the device Note that the device configuration settings may return to the factory default settings SO make sure you save the configuration settings with the Save Restore Settings window described on the previous page To upgrade firmware type in the name and path of the file or click on the Browse button to search for the file Click the Update Firmware button to begin copying the file The file will load and restart the Modem automatically To save your current configuration file to your computer click the Backup Now button A File Download dialog box will open Click the Save button and then designate the location for the configuration file in the Save As window that immediately opens The default location is your desktop Performing a Firmware Upgrade can sometimes change the configuration settings Be sure to backup the Modem s configuration Note settings before upgrading the firmware D Link DSL 320B User Manual Mote Please do not update the Firmware this modem unless instructed to do so by D Link technical support or Your ISP FIRMWARE INFORMATION Currect Firmware Version EI 1 00 Current Firmware Date Oct 11 2007 FIRMWARE UPDATE Mate Some firmware updates reset the configuration options to Factory defaults Before performing an update be sure to save Ehe current configuration From the Maintenance g
16. ctivity has failed and the device should be rebooted currently passing through the Ethernet port D Link DSL 320B User Manual Section 2 Installation Installation This section will walk you through the installation process Placement of the Modem is very important Do not place the Modem in an enclosed area such as a closet cabinet or in the attic or garage Before You Begin Please read and make sure you understand all the prerequisites for proper installation of your new Modem Have all the necessary information and equipment on hand before beginning the installation Installation Notes In order to establish a connection to the Internet it will be necessary to provide information to the Modem that will be stored in its memory For some users only their account information Username and Password is required For others various parameters that control and define the Internet connection will be required You can print out the two pages below and use the tables to list this information This way you have a hard copy of all the information needed to setup the Modem If it is necessary to reconfigure the device all the necessary information can be easily accessed Be sure to keep this information safe and private Low Pass Filters Since ADSL and telephone services share the same copper wiring to carry their respective signals a filtering mechanism may be necessary to avoid mutual interference A low pass filter device can be insta
17. cuments and Settings gt ipconf ig Windows IP Configuration If the address 15 0 0 0 0 check YOur adapter installation security Ethernet adapter Local Area Connection settings and the settings on your Modem Some firewall software Connect ion specific DNS Suffix dlink programs may block a DHCP request on newly installed adapters ily rel C Documents and Settings gt If you are connecting to a wireless network at a hotspot e g hotel coffee shop airport please contact an employee or administrator to verify their wireless network settings D Link DSL 320B User Manual 42 Appendix Networking Basics Statically Assign An IP Address If you are not using a DHCP capable gateway Modem or you need to assign a static IP address please follow the steps below Step 1 Windows XP Click on Start Control Panel Network Connections Windows 2000 From the desktop right click on the My Network Places gt Properties Step 2 Right click on the Local Area Connection which represents your D Link network adapter and select Properties Step 3 Highlight Internet Protocol TCP IP and click on the Properties Step 4 Internet Protocol TCP IP Properties Click on the Use the following IP address and enter an IP address that ym 9 is on the same subnet as your network or the LAN IP address on your Jr 5 ou can get IP settings assigned automatically if your network supports od em Hrs CAM you need to as
18. efault settings Autosense will work This The Advanced ADSL settings allow you bo choose which 051 modulation settings your modem modem will configuration works with all ADSL implementations If you have been support given instructions to change the Modulation method used select the desired option from the Modulation Type drop down menu and click the We recommend that you change these settings unless directed to sa by your ISP Apply Settings button Click the Reboot button on the left panel to let your changes take effect ADVANCED ADSL SETTINGS Leave the Capability setting at the bottom of the window unchanged Modulation Type autosense V unless otherwise instructed by your ISP Both Bitswap Enable and ee 10 Seemless Rate Adaption SRA Enable deal with tests that determine the line condition between your Modem and the ISP s Central office Bitswap Enable SRA Enable Applv Settings D Link DSL 320B User Manual 30 Section 3 Configuration Maintenance The Maintenance directory features an array of options designed to help you get the most out of your Modem Password To access the Password window click the Settings button in the Maintenance directory D Link To change the Administrator s password type the Current Password in the first field the New Password in the second field and enter the password again in the Confirm Password field to be certain you have typed it correctly Click the Ap
19. er Frames Errors 0 0 RS Words 0 0 RS Correctable Errors 0 0 RS Uncorrectable Errors 0 0 HEC Errors 0 0 OCD Errors 0 0 LCD Errors 0 0 Total Cells 0 0 Data Cells 0 0 Bit Errors 0 0 D Link DSL 320B User Manual 38 section 3 Configuration Help To access the Help window click the Help directory DSL 320B SETUP MAINTENANCE STATUS HELP Setup Setup Advanced Maintenance Status Advanced Maintenance Status SETUP HELP D ADSL Setup Setup Time and Date English Parental Control ADVANCED HELP DNS Setup Advanced ADSL MAINTENANCE HELP Password Save Restore Settings Firmware Update Diagnostics System Log STATUS HELP Device Info Connected Clients Statistics BROADBAND D Link DSL 320B User Manual 39 Appendix A Troubleshooting Troubleshooting This chapter provides solutions to problems that might occur during the installation and operation of the DSL 320B Read the following descriptions if you are having problems The examples below are illustrated in Windows XP If you have a different operating system the screenshots on your computer will look similar to the following examples 1 How dol configure my DSL 320B Modem without the CD ROM Connect your PC to the Modem using an Ethernet cable Open web browser and enter the address http 192 168 1 1 The default username is admin and the default password
20. er of ways Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required D Link DSL 320B User Manual 8 Section 2 Installation Information you will need from your ADSL service provider Username This is the Username used to log on to your ADSL service provider s network Your ADSL service provider uses this to identify your account Password This is the Password used in conjunction with the Username above to log on to your ADSL service provider s network This is used to verify the identity of your account WAN Setting Connection Type These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer Most users will use the default settings You may need to specify one of the following WAN Setting and Connection Type configurations Connection Type settings listed in parenthesis PPPoE PPoA PPPoE LLC PPPoE VC Mux PPPoA LLC or PPPoA VC Mux e Static IP Address 1483 Routed IP LLC or 1483 Routed IP VC Mux e Bridge Mode 1483 Bridged IP LLC or 1483 Bridged IP VC Mux Modulation Type ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies Some users may need to change the type of modulation used for their service The default DSL modulation Autosense used for the Modem automatically detects all types of ADSL ADSL2 and ADSL2 modulation
21. gs The Internet connection cannot function if these values are incorrect Click Next to continue Some users may have to adjust the Connection Type from the drop down Username menu at the bottom of this Setup Wizard window The available connection and encapsulation types are PPPoE LLC PPoE VC Mux PPPoA LLC and PPPoA VC Mux YPI YLI Click Next to go to the last Setup Wizard window Connection Password You have selected PPPoEJPPPaA Internet connection Please enter the appropriate information below as Please enter the information exactly as shown baking note of upper and lower cases oo v D Link DSL 320B User Manual 18 section 3 Configuration QUICK SETUP STATIC IP CONFIGURATION Enter values for VPI VCI IP Address Subnet Mask Default Gateway IP address Preferred DNS Server IP address and Alternate DNS Server IP address as instructed by your ISP The Internet connection cannot function if these values are incorrect Select the specific Connection Type from the drop down menu The available connection and encapsulation types are 1483 Routed IP LLC and 1483 Routed IP VC Mux Click Next to go to the last Setup Wizard window QUICK SETUP BRIDGE MODE CONFIGURATION If you are instructed to change the VPI numbers type in the correct setting in the available entry fields The Internet connection cannot function if these val
22. hange automatically to be 1 more that the IP address of the Modem The DHCP IP Address Range ends with the highest IP address number in the pool Type in the DHCP Lease Time in the entry field provided This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the workstation is disconnected from the network or powered off Disable the DHCP Server To disable DHCP deselect the Enable DHCP Server check box in the DHCP Server Settings Optional section and click the Apply Settings button Choosing this option will gray out most of the setting options on this window and require that workstations on the local network be configured manually or use another DHCP server to obtain IP settings If you configure IP settings manually make sure to use IP addresses in the subnet of the Modem You will need to use the Modem s IP address as the Default Gateway for the workstation in order to provide Internet access D Link DSL 320B User Manual 26 section 3 Configuration Time and Date To access the Time and Date window click the Time and Date button in the Setup directory The Modem allows you to configure update and maintain the correct time on the internal clock The Time Configuration option allows you bo configure update and maintain Ehe correct time on the internal system clock To configure system time on the Modem click the Copy Your Computer s Time Settings button or set the time a
23. his chapter include the more advanced features used for network management and security DNS Setup To access the DNS Setup window click the DNS Setup button in the Advanced directory If you have not been given specific DNS server IP addresses or if the Modem is not pre configured with DNS server information select the Obtain DNS server address automatically option Auto discovery DNS instructs the Modem to automatically obtain the DNS IP address from the ISP through DHCP If your WAN connection uses a Static IP address auto Helpful Hints discovery for DNS cannot be used Advanced ADSL ses tomate If you have DNS IP addresses provided by your ISP click the Use the DNS siren following DNS server addresses radio button and enter these IP D ER DHCP enabled PVG addresses in the available entry fields for the Preferred DNS Server and gc pieni the Alternative DNS Server When you have configured the DNS settings Rising rudes as desired click the Apply Settings button and then click the Reboot Alternate DNS Server DNS server IP adresses button on the left panel to let your changes take effect Apply Settings D Link DSL 320B User Manual 29 section 3 Configuration Advanced ADSL To access the Advanced ADSL window click the Advanced ADSL button in the Advanced directory This window allows the user to set the configuration for ADSL protocols For most ADSL accounts the d
24. ing unless you have specific reasons to change this Some users will want to set an Idle Time Out This is an age out value in minutes before the Modem times out If you are instructed to change the VPI values type in the values assigned for your account When you are satisfied that all the WAN settings are configured correctly click the Apply Settings button This will save the settings and reboot the Modem to let your changes take effect Upon restarting the Modem should automatically establish the WAN connection If it does not click the Connect button at the bottom of this window D Link DSL 320B User Manual MANUAL ADSL CONNECTION SETUP Please select the appropriate option to connect to your ISP 9 Choose this option if your ISP uses PPPoE PPPoA mast DSL users Static IP Address Choose this option if your ISP uses Static IP assignments Q Bridge Mode Choose this option if your ISP uses Bridge Mode INTERNET CONNECTION TYPE Enter the information provided by your Internet Service Provider ISP PPPoE hl 1492 Minutes 0 Always On Password Service Name Connection Type MTU Idle Time Out 22 section 3 Configuration Static IP Address When the Modem is configured to use Static IP Address assignment for the WAN connection you must manually assign a global IP Address Subnet Mask and Default Gateway IP addre
25. is admin If you have changed the password and cannot remember it you will need to reset the Modem to the factory default setting see question 2 which will set the password back to admin Note Please refer to the next section Networking Basics to check your PC s IP configuration if you can t see the login windows 2 How dolreset my Modem to the factory default settings Ensure the Modem is powered e Press and hold the reset button on the back of the device for approximately 5 to 8 seconds e his process should take around 1 to 2 minutes Note Resetting the Modem to the factory default settings will erase the current configuration settings To reconfigure your settings login to the Modem as outlined in question 1 then run the Quick Setup wizard 3 What if my Modem is not working correctly There are a few quick steps you can take to try and resolve any issues e Follow the directions in Question 2 to reset the Modem Check that all the cables are firmly connected at both ends Check the LEDs on the front of the Modem The Power indicator should be on the Status indicator should flash and the DSL and LAN indicators should be on as well D Link DSL 320B User Manual 40 Appendix A Troubleshooting e Please ensure that the settings in the Web based configuration manager e g ISP username and password are the same as the settings that have been provided by your ISP 4 Why can t
26. k N A Default Gateway Preferred DNS Server Alternate DNS Server MAC Address 00 10 18 00 00 00 IP Address 192 168 1 1 Subnet Mask 255 255 255 0 DHCP Server ON BROADBAND D Link DSL 320B User Manual 36 section 3 Configuration Connected Clients To access the Connected Clients window click the Connected Clients button in the Status directory This page shows all the currently connected LAN computers or PCs The Connected LAN Clients list displays active DHCP clients when the Modem is acting as a DHCP server CONNECTED DHCP LAN CLIENTS Hostname MAC Address IP Address Expires In DHCP Clients Available D Link DSL 320B User Manual 37 section 3 Configuration Statistics To access the Statistics window click the Statistics button in the Status directory Use this window to monitor traffic on the Ethernet or ADSL connection This window also displays information concerning ADSL status Service PI CI Protocol Received Transmitted Bytes Pkts Errs Drops Bytes Pkts Errs Drops nas 0 23 23 23 23 Bridge 0 0 0 0 0 0 0 424 LAN STATISTICS Interface Received Transmitted Bytes Pkts Errs Drops Bytes Pkts Errs Drops Ethernet 0 0 0 0 0 0 0 0 ADSL STATISTICS Mode Autosense Type Fast Line Coding Trellis Status DOWN Downstream Upstream Rate Kbps SNR Margin dB 0 0 0 0 Attenuation dB 0 0 0 0 Output Power dBm Super Frames 0 0 Sup
27. k your network administrator for appropriate setungs Example If the Modem s LAN IP address is 192 168 1 1 make your IP mem li se tne ess address 192 168 1 X where X is a number between 2 and 254 Make sure that the number you choose is not in use on the network Set Default Gateway the same the LAN address of your Modem 192 168 1 1 Subnet mask Default gateway Set Primary DNS the same as the LAN IP address of your Modem sa ni a AEN 192 168 1 1 The Secondary DNS is not needed or you may enter a NT 192 DNS server from your ISP Alternate DNS server Advanced Step 5 Click on the OK twice to save your settings D Link DSL 320B User Manual 43 Appendix Technical Specifications Technical Specifications ADSL Standards Data Transfer Rate ANSI 11 413 Issue 2 ITU G992 1 G dmt AnnexA e Gdmt full rate downstream up to 8 Mbps upstream up to 1 ITU G992 2 Glite Annex A Mbps ITU 994 1 Ghs e Glite ADSL downstream up to 1 5 Mbps upstream up to 512 Kbps e Gdmt bis full rate downstream up to 12 Mbps upstream up ADSL2 Standards to 12 Mbps ITU G 992 3 Gdmt bis Annex e ADSL full rate downstream up to 24 Mbps upstream up to 1 ITU G 992 4 Glite bis Annex A Mbps ADSL2 Standards ITU G992 5 Annex A Media Interface Protocols e ADSL interface RJ 11 connector for connection to 24 26 TCP UDP e RFC1661 Point to Point AWG
28. lled for each telephone that shares the line with the ADSL line These filters are easy to install passive devices that connect to the ADSL device and or telephone using standard telephone cable Ask your service provider for more information about the use of low pass filters with your installation Operating Systems The DSL 320B uses an HTML based web interface for setup and management The Web configuration manager may be accessed using any operating system capable of running web browser software including Windows 98 SE Windows ME Windows 2000 Windows XP and Windows Vista D Link DSL 320B User Manual 7 Section 2 Installation Web Browser Any common Web browser can be used to configure the Modem using the Web configuration management software The program is designed to work best with more recently released browsers such as Opera Microsoft Internet Explorer version 6 0 Netscape Navigator version 6 2 3 or later versions The Web browser must have JavaScript enabled JavaScript is enabled by default on many browsers Make sure JavaScript has not been disabled by other software Such as virus protection or web user security packages that may be running on your computer Ethernet Port NIC Adapter Any computer that uses the Modem must be able to connect to it through the Ethernet port on the Modem This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well Most noteb
29. n into the on position You should see the Power LED indicator light up and remain lit The Status LED should light solid green and begin to blink after a few seconds 3 Ethernet port is connected to a working device check the Ethernet Link Act LED indicators to make sure the connection is valid The Modem will attempt to establish the ADSL connection if the ADSL line is connected and the Modem is properly configured this should light up after several seconds If this is the first time installing the device some settings may need to be changed before the Modem can establish a connection Factory Reset Button The Modem may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence 1 Press and hold the reset button while the device is powered off 2 Turn on the power 3 Wait for 5 8 seconds and then release the reset button Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings The device settings will be restored to the factory default IP address 192 168 1 1 and the subnet mask is 255 255 255 0 the default management Username is admin and the default Password is admin D Link DSL 320B User Manual 12 Section 2 Installation Network Connections Connect ADSL Line Use the ADSL cable included with the Modem to connect it to a telephone wall socket or receptacle
30. n on the left side of the first window that appears when you successfully access the web manager The Modem allows you to change the Web manager s language settings using the drop down menu on the left side of the window The choices are English Spanish French Italian and German Please note that in some markets only English is supported at this time Click PPPoE PPPOA radio button to access the first Manual ADSL Connection Setup window D Link DSL 320B User Manual D Link DSL 320B II SETUP ADYANCED MAINTENANCE STATUS ADSL Setup Helpful Hints LAN Setup If you are configuring this device for the first time we recommend that you click the Setup Wizard button and First time users are Follow the instructions on screen you wish to modify or configure the ADSL settings manually tick Manual Setup to enable the ADSL Connection Setup recommended to run the Setup Wizard Click the Setup Wizard button and you will be guided step by Time and Date step through the process Parental Control tn Eee Setup Wizard Manual Setup of setting up your ADSL connection Logout connection MANUAL ADSL CONNECTION SETUP Tick the Manual Setup D box if you are a more Please select the appropriate option to connect to your ISP advanced user and have the settings for your 9 Choose this option if your ISP uses PPPoE PPPoA For most DSL users spi Provider English ISP available Stati
31. nd date manually TIME CONFIGURATION by using the Date and Time drop down menus When you are finished click the Apply Settings button to set the system time and date information pete Ngai Day Time Hour Minute Second Copy Your Computer s Time Settings Settings Current Modem Time Jan 01 2000 00 43 16 D Link DSL 320B User Manual 27 section 3 Configuration Parental Control To access the Parental Control window click the Parental Control button in the Setup directory Use this window to deny access to specified websites and to set Internet access time periods URL or Uniform Resource Locator is a specially formatted text string that uniquely defines an Internet website This window will allow users to block computers on the LAN from accessing certain URLs This may be accomplished by simply entering the URL to be blocked in the Website field To configure this window for URL blocking enter the website s address into the Website field use the radio buttons to click the desired Day s either All Week or Select Day s in which case you must tick the checkboxes for the desired individual days of the week select the desired Start Time and End Time or tick the All Day 24 hrs checkbox and then click the Block Website button Configured URL blocking entries are displayed in the table in the middle of the window To remove a Blocked URL entry in the table tick the Remove check box and then click the Remo
32. nt of time it will take to reboot the Modem QUICK SETUP REBOOT CONFIRMATION DIALOG Click OK to continue D Link DSL 320B User Manual Setup complete Click Back to review or modify settings Click Restart to apply current settings and reboot the modem IF your Internet connection does not work after restart vau can try Ehe Setup Wizard again with alternative settings or use Manual Setup instead iF you have your Internet connection details as provided by your ISP Windows Internet Explorer Eg 22 Reboot the device Cancel The DSL Modem has been configured and is rebooting Please wait IF necessary reconfigure your PC s IP address bo match your new configuration after reboot Finishes Microsoft Internet Explorer 20 section 3 Configuration ADSL Setup To access the ADSL Setup window simply login to the Modem or click either ADSL Setup in the Setup directory or Setup on the tool bar at the top of the Web manager window Tick the Manual Setup check box located next to the Setup Wizard button to display the following window To configure the Modem s basic configuration settings without running the oetup Wizard you can access the windows used to configure ADSL oetup LAN Setup Time and Date and Parental Control settings directly from the Setup directory To access the ADSL Setup windows for Manual ADSL Connection Setup for PPPoE PPPOA Static IP Address and Bridge Mode click on the ADSL Setup link butto
33. ook computers are now sold with an Ethernet port already installed Likewise most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment If your computer does not have an Ethernet port you must install an Ethernet NIC adapter before you can use the Modem If you must install an adapter follow the installation instructions that come with the Ethernet NIC adapter Additional Software may be necessary to install software on your computer that enables the computer to access the Internet Additional software must be installed if you are using the device a simple bridge For a bridged connection the information needed to make and maintain the Internet connection is stored on another computer or gateway device not in the Modem itself lf your ADSL service is delivered through a PPPoE or PPPoA connection the information needed to establish and maintain the Internet connection can be stored in the Modem In this case it is not necessary to install software on your computer It may however be necessary to change some settings in the device including account information used to identify and verify the connection All connections to the Internet require a unique global IP address For bridged connections the global IP settings must reside a TCP IP enabled device on the LAN side of the bridge such as a PC a server a gateway device such as a Modem or similar firewall hardware The IP address can be assigned in a numb
34. ord of this modem is admin help secure your network D Link recommends that D Link recommends to help secure your network the user change the you should choose a new password between 1 and 16 characters IF you do not wish to choose a new Current Password from the factory default admin The New Password password now just click Skip Ea continue Click Next to proceed to next step should be between 1 and 16 alphanumeric characters Once you have filled out the fields in this window including re typing the new password in Eure basen the Confirm Password field click the Next button to continue New Password Confirm Password If you do not want to change the password click the Skip button to proceed to the next step D Link DSL 320B User Manual 16 section 3 Configuration QUICK SETUP SELECT THE INTERNET CONNECTION TYPE Now use the drop down menus to select the Country ISP Provider and Connection Type used for the Internet connection and enter VPI and values if applicable Your ISP has given this information to you any information that is not required for your provider will automatically be grayed out in this window and subsequent Quick Setup windows The Connection Type options are 1483 Bridged IP LLC 1483 Bridged IP VC Mux 1483 Routed IP LLC 1483 Routed IP VC Mux PPPoE LLC PPPoE VC Mux PPPoA LLC and PPPoA VC Mux Click the
35. our modem The IP Address that is configured here gt is the IP Address that vou use En access Ehe Web based management interface IF you change the IP Address addresses available in the DHCP IP address pool will change here you may need to adjust your PC s network settings to access the network again automatically if you change the IP address of the Modem See the next section for information on DHCP setup change the LAN Modem IP Address or Subnet Mask type in the suet desired values in the Modem Settings section and click the Apply Settings button Your web browser should automatically be redirected DHCP SERVER SETTINGS OPTIONAL to the new IP address You will be asked to login again to the Modem s Use this section to configure the built in DHCP Server to assign IP addresses bo the computers on your network web manager Enable DHCP Server The DHCP server is enabled by default for the Modem s Ethernet LAN interface DHCP service will supply IP settings to workstations ae configured to automatically obtain IP settings that are connected to the PESCE pee seconds Modem though the Ethernet port When the Modem is used for DHCP it becomes the default gateway for DHCP client connected to it Keep in NUMBER OF DYNAMIC DHCP CLIENTS 0 mind that if you change the IP address of the Modem the range of IP addresses in the pool used for DHCP on the LAN will also be changed The IP address pool can be up to 253 I
36. ply Settings button and then click the Reboot button on the left panel to let your changes take effect The system User Name remains admin this cannot be changed using the Web manager interface D Link DSL 320B User Manual Password Save Restore Settings Firmware Update Diagnostics System Log Logout BROADBAND 081 3208 II SETUP ADYANCED MAINTENANCE STATUS The factory default password of this modem is admin help secure your network D Link recommends that you should choose new password between 1 and 16 characters SET PASSWORD OPTIONAL To change the modem password please type in the current password then the new password twice Current Password New Password a Confirm Password Apply Settings Helpful Hints This page allows you to modify your modem password needed to access this Web management interface For security reasons it is recommended that you change your device password From the Factory default The password you choose should be between 1 and 16 characters in length Please make sure to choose password you can remember or write it own and keep i Your modem to factory default settings and you will lose all your device configuration settings 31 section 3 Configuration Save Restore Settings To access the Save Restore Settings window click the Save Restore Settings button in the Maintenance directory Once you
37. prompted to enter this Username The default Username for the Modem is admin The user cannot change this Password This is the Password you will be prompted to enter when you access the Modem s management interface The default Password is admin The user may change this LAN IP addresses for the DSL 320B This is the IP address you will enter into the Address field of your web browser to access the Modem s configuration graphical user interface GUI using a web browser The default IP address is 192 168 1 1 This may be changed to suit any IP address scheme the user desires This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled LAN Subnet Mask for the DSL 320B This is the subnet mask used by the DSL 320B and will be used throughout your LAN The default subnet mask is 255 255 255 0 This can be changed later D Link DSL 320B User Manual 10 Section 2 Installation Information you will need about your LAN or computer Ethernet NIC lf your computer has an Ethernet NIC you can connect the DSL 320B to this Ethernet port using an Ethernet cable You can also use the Ethernet ports on the DSL 320B to connect to other computer or Ethernet devices DHCP Client status Your DSL 320B ADSL Modem is configured by default to be a DHCP server This means that it can assign an IP address subnet mask and a default gateway address to computers on your LAN The default range of IP addresses the DSL 320B
38. ss used for the WAN connection To configure a Static IP Address WAN connection follow these steps 1 Change the IP Address Subnet Mask and Default Gateway as instructed by your ISP These are the global IP settings for the WAN interface This is the visible IP address of your account Your ISP should have provided these IP settings to you If your ISP also asks you to change DNS server IP addresses enter the Preferred DNS Server and Alternate DNS Server information manually 2 Choose the Connection Type from the drop down menu This defines both the connection protocol and encapsulation method used for your ADSL service The available options are 1483 Routed IP LLC and 1483 Routed IP VC Mux If you have not been provided specific information for this setting leave the default setting 3 If you are instructed to change the VPI or VCI values type in the values assigned for your account 4 When you are satisfied that all the WAN settings are configured correctly click the Apply Settings button This will save the settings and reboot the Modem to let your changes take effect 5 Upon restarting the Modem should automatically establish the WAN connection D Link DSL 320B User Manual MANUAL ADSL CONNECTION SETUP Please select the appropriate option to connect to your ISP Choose this option if your ISP uses PPPoE PPPoA For mast DSL users 9 Static IP Address Choose this option if your ISP uses
39. t 3 When you are satisfied that all the WAN settings are configured correctly click the Apply Settings button This will save the settings and reboot the Modem to let your changes take effect 4 Upon restarting the Modem should automatically establish the WAN connection D Link DSL 320B User Manual MANUAL ADSL CONNECTION SETUP Please select the appropriate option to connect to your ISP PPPoE PPPoA Choose this option if your ISP uses For most DSL users Static IP Address Choose this option if your ISP uses Static IP assignments Bridge Mode Choose this option your ISP uses Bridge Mode BRIDGE MODE Connection Type 1463 Bridged IP LLC Cancel Settings 24 section 3 Configuration LAN Setup To access the LAN Setup window click the LAN Setup button in the Setup directory You can configure the LAN IP address to suit your preference Many users will find it convenient to use the default settings together with EA TINI DHCP service to manage the IP settings for their private network The IP Spora ara you should nat ood to drange sy df the slings hae to gat Your network up and ium address of the Modem is the base address used for DHCP In order to use the Modem for DHCP on your LAN the IP address pool used for MODEM SETTINGS DHCP must be compatible with the IP address of the Modem The IP Use this section to configure the local network settings of y
40. t Sayve Restore Settings screen Backup Mow To update the Firmware your PC must have a wired connection ba the modem Enter the name of the Firmware update File and click on the Upload button Update Firmware 33 section 3 Configuration Diagnostics To access the Diagnostic window click the Diagnostics button in the Maintenance directory This window is used to test connectivity of the Modem A Ping test may be done through the local or external interface to test connectivity to known IP ae addresses The diagnostics feature executes series of tests of your system software and hardware connections Use this window when SYSTEM CHECK working with your ISP to troubleshoot problems Test your Ethernet 1 4 Connection Test ADSL Synchronization INTERNET CONNECTIVITY CHECK Test PPP server session Test authentication Test the assigned IP address Ping ISP Default Gateway Ping Preferred DNS server Re run Diagnostics Tests D Link DSL 320B User Manual 34 section 3 Configuration System Log To access the System Log window click the System Log button in the Maintenance directory The system log allows you to configure local and remote logging and to view the logs that have been created The system Log allows you to configure local remate and email logging and to view the logs that have been created To generate a system log tick the Log check box Select the Log Level and Displa
41. the Modem s management software remotely e Easy Installation The Modem uses a web based graphical user interface program for convenient management access and easy set up Any common web browser software can be used to manage the Modem D Link DSL 320B User Manual 4 Section 1 Product Overview Hardware Overview ADSL Port Use the ADSL cable to connect to the your telephone line RJ 11 port Connections Reset Button To manually reset depress button with the power on for at least seven seconds Ethernet Port Use the Ethernet port to connect the Modem to a computer or an Ethernet LAN D Link DSL 320B User Manual Power Button Power Insert Push in to power on the Modem Use the adapter shipped with the Push again to power off the Modem to connect to power Modem Source Section 1 Product Overview Hardware Overview LEDs DSL p A steady green light indicates a valid EENEN ADSL connection This will light after the NH ADSL negotiation process has been ta is settled A blinking green light indicates i activity on the WAN ADSL interface DSL 320B Status bu Lights steady green during power on self test POST Once the connection status has been LAN settled the light will blink green If the indicator A solid green light indicates a valid link on lights steady green after the POST the system startup This light will blink when there is a
42. tructions on screen If you wish to modify or configure the ADSL settings manually tick Manual Time and Date Setup to enable the ADSL Connection Setup Parental Control Setup Wizard Manual Setup Logout 7 MANUAL ADSL CONNECTION SETUP English PPPOE PPPOA INTERNET CONNECTION Helpful Hints First time users are recommended to run the Setup Wizard Click the Setup Wizard button and vill be guided step step through the process of setting up your ADSL connection Tick the Manual Setup box you are more vanced user and have or your Internet Service Provider ISP available Please take care when entering your username incorre sername or ect username or password combinations BROADBAND 15 section 3 Configuration QUICK SETUP OPENING WINDOW The first window of the Setup Wizard lists the basic steps in the process These s teps are as follows This wizard will quide you through a step by step process to configure your new D Link modem and connect to Internet 1 Change the Modem password Step 1 Change your 05 3208 password 2 Configure the connection to the Internet e Step 2 Select Internet Connection 3 Save the new configuration settings and reboot the system dou QUICK SETUP CHANGE YOUR MODEM PASSWORD This window of the Setup Wizard is used to change the Modem password The Factory default passw
43. twisted pair telephone line e ARP Protocol e LAN interface one RJ 45 port for 10 100BASE T Ethernet RARP RFC1994 CHAP connection CMP RFC2131 DHCP Client RFC1334 PAP DHCP Server RFC1483 2684 RFC2364 PPP over Multiprotocol RFC2516 PPP over Encapsulation over ATM Ethernet Adaptation Layer 5 AAL5 D Link DSL 320B User Manual 44
44. ues are incorrect Select the specific Connection Type from the drop down menu The available connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridged IP VC Mux Click Next to go to the last Setup Wizard window D Link DSL 320B User Manual You have selected Static IP Internet connection Please enter the appropriate information below as provided by vour ISP Click to continue YPI YLI IP Address Subnet Mask Connection Type Default Gateway Preferred DNS Server Alternate DNS Server Enter Ehe bridge information provided to vau by your ISP Click Nest to continue YPI YLI Connection Type m 1483 Bridged 19 section 3 Configuration QUICK SETUP FINISH amp RESTART CONFIRMATION Finally you can confirm that the setup process is completed If you are satisfied that you have entered all the necessary information correctly click the Restart button to save the new configuration settings and restart the Modem If you need to change settings from a previous window click the Back button QUICK SETUP REBOOT CONFIRMATION DIALOG Click the OK button to proceed with the Modem reboot QUICK SETUP REBOOT TIME INDICATOR The following window opens to indicate the amou
45. ve Selected button To modify a table entry click the corresponding Edit hyperlink make the desired changes and then click the Block Website button This window also enables you to determine when Internet access is granted by using the settings in the Internet Access Time Restrictions section of this window Configure Time and days of the week and then use the drop down menu to toggle the Allow Deny setting for each time period Clicking the Apply Settings button will allow your setting to take effect D Link DSL 320B User Manual Parental Control provides two useful tools Far restricting Internet access Block Websites Scheduling allows you to quickly create list of all web sites that vou wish to stop users From accessing and the times vou want Ehe restriction to take place Internet Access Time Restrictions allows you to control when the client or connected to the modem are allowed to access the Internet Note Please ensure that vou have set the correct time and date Far your modem BLOCKED WEBSITES SCHEDULING Day s Al week Select Davis sun Mon L rue wed L Thu EL Fri Ll sat All Day 24hrs Start Time E haur minute 24 hour End Time 1 haur minuibe 24 hour Black Website Website Schedule Rule Remove INTERNET ACCESS TIME RESTRICTIONS Time Mon Tue i Allow Deny set 1 Apply Settings 28 Section 3 Configuration Advanced T
46. y Level from the pull down menus The levels available are the same for each type of level Emergency Alert Critical Error Warning Log Notice Informational and Debugging Use the Mode drop down menu to ee select Local Remote or Both Click the Apply Settings button and then click the Reboot button on the left panel to allow your new settings to Display LENEN take effect SYSTEM LOG First Page Last Page Clear Log Apple Settings D Link DSL 320B User Manual 35 section 3 Configuration Status Use the various read only windows to view system information and monitor performance Device Info To access the Device Info window click the Device Info button in the Status directory Use this window to quickly view basic current information about the LAN and WAN interfaces and device information including Firmware Version and MAC address Connected Clients The Device Status page allows you to check the status of your Internet connection and LAN eredi yo au Statistics including _ _ s version summary of your Logout GENERAL Internet configuration and Ethernet status Time Jan 01 2000 00 08 06 Eee ere Dd Firmware Version RI 1 00 INTERNET STATUS Cable Status ADSL Link Down ADSL Status Disconnected Connection Up Time 0 hours 0 minutes 0 seconds Downstream Line Rate Kbps Upstream Line Rate Kbps Connection Type PPPoE LLC IP Address Subnet Mas
Download Pdf Manuals
Related Search