StarTech.com 1 Port PCI 10/100/1000 32 Bit Gigabit Ethernet Network Adapter Card
Contents
1. driver software manually gt Let me pick from a list of device drivers on my computer This lit wil show installe diver software compstibie with the device and all diver software in the same category as the device 7 In the Browse window navigate to the CD DVD drive and select open the folder for PCI Gigabit Lan Card ST1000BT32 and then select the folder for the operating system Click the OK button 8 Click the Next button and Windows should now start searching for the drivers Once this has completed click the Finish button How to Use Monitoring Your Card The card uses one LED to indicate the connection rate and activity of the card A GREEN AMBER OFF LED indicates that a 1000 100 10 Mbps connection respectively is established at that rate A blinking LED indicates that there is traffic flow on the network No Link Activity LED lit at 1000 100 Mbps indicates an error Make sure that all devices are turned on and that the network cable is properly connected at both ends Also make sure that your network cables comply with EIA TIA 568 and at least Cat 5e specifications If problems persist power down all devices and disconnect all plugs Wait at least ten seconds then plug the devices back in and power them up Connecting Your Card to Your Network Depending on how you are planning on using the card the device you are connecting it to and the type of cable you need may differ To take advantage of the card s Giga2. Starlechcom Hard to find made easy 1 Port PCI Gigabit Ethernet Network Card ST1000BT32 actual product may vary from photos DE Bedienungsanleitung de startech com FR Guide de l utilisateur frstartech com ES Gu a del usuario es startech com IT Guida per l uso it startech com NL Gebruiksaanwijzing nl startech com PT Guia do usu rio pt startech com For the most up to date information please visit www startech com Manual Revision 09 20 2011 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit differ
3. ase or touching your PCI card StarTech com recommends that you wear an anti static strap when installing any computer component If an anti static strap is unavailable discharge yourself of any static electricity build up by touching a large grounded metal surface such as the computer case for several seconds Also be careful to handle the PCI card by its edges and not the gold connectors Hardware Installation 1 Turn your computer off and any peripherals connected to the computer i e Printers external hard drives etc Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices 2 Remove the cover from the computer case Refer to documentation for your computer system for details 3 Locate an open PCI or PCI X slot and remove the metal cover plate on the rear of the computer case 4 Gently insert the card into the open PCI or PCI X slot and fasten the card s bracket to the rear of the case NOTE If installing the card into a small form factor low profile system replacing the pre installed full profile bracket with the included low profile installation bracket may be necessary 5 Place the cover back onto the computer case 6 Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1 Driver Installation NOTE The following instructions are for Windows users only Linux or Netware users sh
4. bit 1000 Mbits sec capacity it is recommended that you always use at least Cat 5e Ethernet cable If you are unsure of the type of cable required for your device consult your device manufacturer NOTE StarTech com carries a wide range of Cat 5e and Cat 6 Ethernet cables in various colors and lengths For more information on these products as well as tips and StarTechg om 4 Hard to find made easy Instruction Manual ideas for setting up and running your network visit http www startech com and click on the Networking tab near the top of the screen Ifyou are connecting your computer directly to another computer you need to use a Crossover cable If you are connecting your computer to a hub or switch you should use a straightthrough cable Ifyou are connecting your computer to the Internet via a DSL or cable modem you should use the cable recommended by the modem manufacturer Tips for Setting Up Your Network For information and help on setting up your network please consult the manufacturer of your operating system The following is for tips and troubleshooting purposes only and is intended for Microsoft users on a local area network Make sure your computers are configured properly For your convenience you should configure each of your computers so that they can see each other and share devices and files To do this you have to make sure that the following have been installed on your computers Clie
5. ed properly 2 Click on File and Print Sharing 3 Choose whether you want to install one both or neither of these options Click OK 4 Decide what files or folders you want to share You can call up sharing options by right clicking on a file or folder and choose Sharing Windows 2000 Me 98 95 or Sharing and Security Windows XP NOTE If you are having any difficulties setting up or using your network please contact your operating system vendor StarTechg om 6 Hard to find made easy Instruction Manual Specifications Host Interface Form Factor Chipset ID Connectors LEDs Supported Standards Maximum Data Transfer Rate Operating Temperature Humidity Compatible Operating Systems Instruction Manual PCI 32 bit 3 3V 5V Standard Low Profile Realtek RTL8110SC 1 x RJ45 Ethernet female 1x1000 Link Activity 1x100 Link Activity IEEE 802 3 10BaseT IEEE 802 3u 100BaseTx IEEE 802 3ab 1000BaseT 1000 2000 Mbps half full duplex 0 C 55 C 32 F 131 F 10 95 RH Windows 2000 XP Server 2003 Vista Server 2008 R2 7 32 64 bit Netware Server 5 x Netware ODI for DOS Linux Unix StarTechg om Hard to find made easy Technical Support StarTech coms lifetime technical support is an integral part of our commitment to provide industry leading solutions If you ever need help with your product visit www startech com support and access our comprehensive selection of online tools docu
6. eeeeeeee 4 Tips or Setting Up Your Network ancla 5 SPECITICATIONS f 7 Technical SUPPOFE sescsciscssccisssssnssseccsscrecessssscssdecdesscesssssessstodescessasssssesssests 8 Warranty InformatiON v iiviccossuioniocacaninenncncnncaninnidnsnsrioniaci nnecacariosiincniin 0 Instruction Manual Sta Tech om i Hard to find made easy Introduction Thank you for purchasing a StarTech com Gigabit Ethernet adapter Now your network can experience incredibly fast data transfer speeds of up to 1000 Mbits sec With it s auto sensing and auto negotiation features this card is also backwards compatible with 100 Mbits sec Fast Ethernet and 10 Mbits sec Ethernet speeds and is capable of both full and half duplex communications The ST1000BT32 is compliant with 32 bit PCI specification Packaging Contents 1xPCI Gigabit Ethernet network adapter 1xLow Profile Bracket 1x Driver CD 1XInstruction Manual System Requirements Microsoft Windows 2000 XP Server 2003 Vista Server 2008 R2 7 32 64 bit or Novell Netware Server 5 x or Netware ODI for DOS or Linux Unix Anavailable bus mastering 32 bit PCI slot RJ45 terminated Cat 5e or higher UTP Ethernet cable StarTechg om 1 Hard to find made easy Instruction Manual Installation WARNING PCI cards like all computer equipment can be severely damaged by static electricity Be sure that you are properly grounded before opening your computer c
7. ent from that to which the receiver is connected Consultthe dealer or an experienced radio TV technician for help Use of Trademarks Registered Trademarks and other Protected Names and Symbols This manual may make reference to trademarks registered trademarks and other protected names and or symbols of third party companies not related in any way to StarTech com Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech com or an endorsement of the product s to which this manual applies by the third party company in question Regardless of any direct acknowledgement elsewhere in the body of this document StarTech com hereby acknowledges that all trademarks registered trademarks service marks and other protected names and or symbols contained in this manual and related documents are the property of their respective holders Starlechcom Hard to find made easy Instruction Manual Table of Contents Tice aco m 1 P ck ging Les nic e EE 1 System ROQUIESMONES AROR APEE AEE AE AE A ETET PN E AN E 1 DESEE M 2 Hardware Installation m 2 Driver ustallatiQn ss asco pita e e nte oo RRp A AAA 2 AAA A 4 Monitoring YOUT CAYO accredited 4 Connecting Your Card to Your Network sssssessssccccssssssssscceccssssessesseccensnssseeceeeesnnnsseeeseseessnnne
8. every connectivity part you need From the latest technology to legacy products and all the parts that bridge the old and new we can help you find the parts that connect your solutions We make it easy to locate the parts and we quickly deliver them wherever they need to go Just talk to one of our tech advisors or visit our website You ll be connected to the products you need in no time Visit www startech com for complete information on all StarTech com products and to access exclusive resources and time saving tools StarTech com is an ISO 9001 Registered manufacturer of connectivity and technology parts StarTech com was founded in 1985 and has operations in the United States Canada the United Kingdom and Taiwan servicing a worldwide market
9. ion to select the device driver from a ist Windows does not guarantee that Install from a list or specific location Advanced 3 the you choose wil be the best match for your hardware 4 In the Browse window navigate to the CD DVD drive and select open the folder for PCI Gigabit Lan Card ST1000BT32 and then select the folder for the operating system version Click the OK button 5 Click the Next button and Windows should now start searching for the drivers Once this has completed click the Finish button Windows Vista Server 2008 R2 7 1 When the Found New Hardware window appears on the screen click on the Locate and install drivers software recommended option If prompted to search online select the Don t search online option 2 When prompted to insert the disc insert the Driver CD that came with the card into your CD DVD drive and Windows will automatically proceed to search the CD 3 If a Windows Security dialog window appears click the Install this driver software anyway option to proceed 4 Once the driver is installed click the Close button 5 If Windows is unable to locate drivers go back and this time select the option to Browse My Computer 6 Make sure the option to Include subfolders is checked then click the Browse button Starlechcom 3 Hard to find made easy Instruction Manual include subfolders gt Browse my computer for driver software Locate and metal
10. mentation and downloads For the latest drivers software please visit www startech com downloads Warranty Information This product is backed by a lifetime warranty In addition StarTech com warrants its products against defects in materials and workmanship for the periods noted following the initial date of purchase During this period the products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not warrant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or their officers directors employees or agents for any damages whether direct or indirect special punitive incidental consequential or otherwise loss of profits loss of business or any pecuniary loss arising out of or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limitations or exclusions contained in this statement may not apply to you Starlechcom 8 Hard to find made easy Instruction Manual StarTechycom Hard to find made easy Hard to find made easy At StarTech com that isn t a slogan It s a promise StarTech com is your one stop source for
11. nt for Microsoft Networks TCP IP Internet Protocol Fileand Print Sharing These clients protocols and services can be found in the following locations Windows XP 1 Click on Start then click My Network Places 2 Click View Network Connections in the Network Tasks box 3 Right click on Local Area Connection and choose Properties Windows 2000 1 Click on Start then Settings then Network and Dialup Connections 2 Double click Local Area Connections and click the Properties button NOTE If you need to add any of the following components check your Windows documentation for details Make sure all your computers are on the same workgroup To be able to communicate properly with each other each computer must be located on the same workgroup Each computer within a workgroup must have a unique name To ensure compatibility between each version of Windows keep your computer names under 13 characters long To view add or edit your computer s name do the following StarTechg om 5 Hard to find made easy Instruction Manual Windows XP 1 Click Start and then Control Panel 2 Double click System then click on the computer name tab Windows 2000 1 Click on Start then Settings then Control Panel 2 Double click on System 3 Click on the Network Identification tab Make Sure Your Sharing is Set Up Properly 1 Go to your network dialog box using the procedure explained under Make sure your computers are configur
12. ould consult the Readme txt files in their respective folders Depending on your OS and the configuration of your system the instructions below may not be identical to the instructions on your screen Windows 2000 Server 2003 XP 1 When the Found New Hardware wizard appears on the screen insert the Driver CD into your CD DVD drive If you are prompted to connect to Windows Update please select the No not this time option and click Next 2 Select the option Install from a specific location Advanced and then click the Next button StarTechg om 2 Hard to find made easy Instruction Manual 3 Select the option to Include this location in the search and then click the Browse button Hardware Update Wizard Hardware Update Wizard Please choose your search and installation options This wizard helps you install software for Search for the best driver in these locations Use the check Below to Int or expand the default search which includes local paths and removable media The best diver found wil be instaled Search removable media floppy CD ROM If your hardware came with an installation CD 99 or floppy disk insert it now V Include this location in the search x What do you want the wizard to do P O Dont search wil choose the driver to install Install the software automatically Recommended E SES Ke dede due WE WHEN doe i in Advanced 10088 this opt
Download Pdf Manuals
Related Search