XL-2013l TELGO).cdr
Contents
1. e Wall Installation The unit can be mounted to any wall surface using two self tapping screws not supplied Follow the instructions 1 Install the two self tappin screws at a distance of 8 3cm from each other and located on a vertical center line See figure 1 RAR A Figure 1 2 Tighten each screw just enough to allow the wall mounting bracket enough clearance to slip snugly over each screw head 3 Connect one end of the telephone line cord into the unit line Jack Connect the remaining end of the telephone line cord into a nearby telephone jack 4 The handset hanger tab is shipped in the wall mounting use position For desk use position slide the tab out and rotate 180 degrees See figure 22. 19 USER S MANUAL PLEASE READ THIS USER S MANUAL Thank you for purchasing this new model T9 Please read this manual before attempting to set up or use this unit It contains important information of installation and use Keep this manual for future reference FEATURE LIST 1 R Mute3 Last number redial 2 Ringer volume selection 3 Ringer indicator 4 Installation as a wall unit INTRODUCTION CHECK THE CONTENTS OF THE BOX Box should contain e Handset with handset cord Phone base User s manual CONNECTING LINE CORD Plug one end of the supplied modular cord into the line jack Then plus the other end into telephone line jack TROUBLESHOOTING GUIDE PROBLEM No dialling tone SOLUTION Check all modular plugs to be sure they have clicked into place Are the cords damaged in any way Try another phone jack If your telephone works on another jack there maybe a problem with your wiring PROBLEM Phone doesn t ring SOLUTION How many extensions are connected to your line If more than five telephones are installed on the same line you may need to contact your local telephone company to confirm the maximum number of extensions for your calling area ADDITIONAL INFORMATION 1 Avoid rough handling areas with excessive moisture heavy dust or extreme temperature 2 The unit should be cleaned regularly use a mild detergent and slightly damp cloth never use strong solvent or abrasive 3 D
3. o not expose the telephone in direct sunlight or use it in extreme humidity 1 The desk use position 2 The wall mounting use position t Receiver Hook Handset 5 To install as a wall unit See figure 3 Witch a Align the hole on the back of the telephone with mounting pins on the wall 9 i mute b Slowly slide the unit down until it snaps into place ae r puton R Ringer button indicator Y Buzzer Y Ringer volume switch MOUNTING i E PINS Microphone Figure 3 gt e Ringer volume selection Move the ringer volume control to left to have the maximum ringer volume To have the gentle ringer volume move the control to right e Normal dialling 1 Liftthe handset 2 Enter the telephone number you want to dial e Redial function Lift the handset then press the G button to redial the last telephone number you dialled eR function Press the R button to terminate a call and institute a dialling tone for another call or to Set another call from Call Waiting a special telephone service NOTE If you do not have any special telephone service such as Call Waiting press the R button during a call may disconnect your current conversation e Mute function If you wish to speak privately to someone else in the room without your caller overhearing press and hold the button Then the caller can not hear you during the mute operation To resume normal conversation just release the button
Download Pdf Manuals
Related Search