Digital Wireless Microphones Product Range
Contents
1. Wireless Microphones Since their first introduction in 1974 Sony has been continuously developing a wide range of wireless microphone systems to offer superb audio performance highly stable transmission and flexible simultaneous multi channel operation Nowadays it can be clearly seen that the industry is migrating from Standard Definition SD to High Definition HD for video production as well as from analogue to digital for sound production This trend naturally boosts the need for higher quality digital technology in wireless microphone systems Wireless Microphones Professional Audio Digital Wireless Microphones Product Range With the introduction of a new fully digital wireless microphone system Sony has made a breakthrough in the history of wireless microphone technology Comprising of the DWI B0O1 bodypack transmitter DWR SO1D slot in type two channel receiver and DWA 01D adapter the system provides excellent quality digital wireless audio transmission large scale multi channel operation and enhanced system flexibility a perfect match for high quality ENG EFP applications Transmission of excellent quality 24 bit 48kHz sampling digital audio signals is realised on the DWI BO transmitter The audio codec used in the system was developed specifically for wireless audio transmission enabling the low latency secure and reliable operation that is mandatory for quadlity critical applications system Fe2. 51 x 98 mm 2 1 8 x 3 7 8 inches gt Mass 170 g 6 0 oz Characteristics bDirectivity Characteristics _ 200Hz 1kHz 5kHz Frequency Response Characteristics N oO T S A TAA s AUAA e EN s HHEH 3030 50 100 200 500 ik 2k 5k 10k 20k Frequency Hz 0 90 180 CU E672 Capsule Unit gt Electret condenser microphone capsule with hyper cardioid polar pattern gt A wide variety of applications in news gathering sports events and interviews gt The supplied windscreen reduces wind noise and popping gt Frequency response 50Hz to 16kHz gt Max SPL 120qB gt Dimensions 37 x 172 mm 1 1 2 x 6 7 8 inches gt Mass 150 g 8 3 Oz gt Supplied accessory Urethane windscreen 1 Characteristics Directivity Characteristics Z E oh 4kHz R KS N 1 God SINS ARS LIT 2 gt 180 Frequency Response Characteristics T 20 S al a O eT C o A 2 LL i Q 10 d A Eih L ot LLY EINE Ball FEE LL 20 50 100 1k 2k 5 10k Frequency Hz 0 90 180 CU F117 Capsule Unit gt Dynamic microphone capsule with omni directional polar pattern gt Superb rejection of wind noise and popping gt Designed for interview applications gt Frequency response 50Hz to 15kHz gt Dimensions 44 x 105 mm 1 3 4 x 4 1 4 inches gt Mass 170 g 6 0 oz gt Supplied accessory Ure
3. SMC9 4S Sony 4 pin 2 balanced AN 820A 758 MHz to 862 MHz More than 10 dB 50 Q Less than 3 Less than 6 cB More than 60 cB at 95 dBu output 482 x 44 x 300 mm 19 x 1 3 4 x 11 7 8 inches BNC R type DC 9V Less than 35 mA 70x 117 x 132 mm 2 7 8 x 4 5 8 x 5 1 4 inches Approx 250 g 9 02 Attachment A 1 Attachment B 1 Microphone stand screw 1 Microphone stand screw adapter PF 1 2 to NS 5 8 1 Fixing screws 1 set Wireless Microphones Professional Audio UWP Wireless Microphone Product Range The Sony UWP Series UHF Wireless Microphone Package introduced in 2003 seta milestone in the history of wireless microphone systems with its uncompromised ease of operation It brought a number of significant benefits to wireless applications including highly stable audio reception by utilising a space diversity reception system and proven interference free multi channel operation since ifs introduction the UWP Series has been widely adopted around the world for a variety of applications such as news gathering interviewing professional video production entertainment live events and conferences to name just a few Common Features Compact Lightweight and Robust Design All components of the UWP Series the bodypack transmitter handheld microphone plug on transmitter portable receiver and tuner module utilise an extremely robust metal chassis which is ideal for heavy duty wireless operati
4. x1 belt clip x1 cables 3 pole locking mini plug XLR type and 3 pole locking mini plug stereo mini plug x1 each UVWP V6 UHF Wireless Microphone Package Consists of UIX B2 bodypack transmitter UTX P l plug on transmitter and URX P2 portable receiver UTX B2 bodypack transmitter gt Extremely compact lightweight and robust metal body gt Switchable MIC LINE input level and adjustable attenuator 0 to 21cB 3qB steps gt Supplied omni directional lavalier microphone utilises a newly developed miniature metal body UTX P1 plug on transmitter gt Converts a wired microphone to a wireless microphone via an XLR type connector URX P2 portable receiver gt Compact lightweight and robust metal body well suited for use with Sony s professional camcorders gt Convenient auto channel scanning function allowing automatic search for unoccupied channels supplied accessories gt UTX B2 Omni directional lavalier microphone x1 windscreen x3 microphone holder clip x1 belt clip x1 gt UTX P1 Soft case x1 gt URX P2 Shoe mount adapter x1 belt clip x1 cables 3 pole locking mini plug XLR type and 3 pole locking mini plug stereo mini plug x1 each PMW EX Professional Audio Wireless Microphones UWP X7 UHF Wireless Microphone Package Consists of UTX B2 bodypack transmitter and URX M2 tuner module UTX B2 bodypack transmitter gt Extremely compact lightweight and robust met
5. 3 5 hours at 10mMmW output at 25 C O7 2P with Sony LR6 AA size alkaline batteries Approx 44 x 78x 44 mm excluding projection Approx 245 g including batteries Soft case x1 Soare battery case x1 USB adapter cable x1 USB cable x1 Operating instructions x1 DWR SO1D TUNER SECTION Type of reception Circuit system Receiving frequency CE62 range CE67 Channel step CE62 CE67 Local oscillators RF input terminal Sensitivity Audio delay AUDIO SECTION Audio output connector GENERAL Dimensions W x H x D excluding projection Mass Supplied accessories DWA 01D AUDIO SECTION Output connector Analogue audio output impedance AES EBU audio output impedance Monitor output connector Monitor output level GENERAL Power requirements Operating voltage Dimensions W x H x D Mass Supplied accessories Space diversity Dual conversion superheterodyne 798 to 822 MHz TV 62 to 64 channels 838 to 862 MHz IV 67 to 69 channels 25 kHz PLL synthesiser BNC R 50 20 dBu or less at bit error rate 1 x 10 2 1 ms D sub 15 pin x1 Approx 88 x 117 8 x 31 3 mm Approx 280 g Whip antenna x2 USB cable adapter x1 USB cable x1 Frequency list x1 Operating instructions x1 Sony 4 pin SMC9 4S x2 OUTPUT1 OUTPUT2 150 Q or less 150 Q 3 5 mm stereo mini jack 5 mW at 16 Q load T H D 1 DC 12 V DC 3 6 to 17 V Approx 88 x 138 x 31 5 mm excluding projec
6. 6 5 02 including batteries Soft case x1 Operating instructions x1 Specifications Professional Audio Oscillator Type of reception CE62 Receiving frequencies aia E67 Antenna Pilot tone signal RF squelch level Frequency response Reference deviation Signal to noise ratio Audio output connector Audio output level Monitor output connector Monitor output level Indicators LCD LED Power requirements Battery life Dimensions W x H x D Mass Supplied accessories URX P2 URX M2 Crystal controlled PLL synthesiser Space diversity 798 MHz to 822 MHz TV 62 to 64 channels 838 MHz to 862 MHz TV 67 to 69 channels selectable from 189 frequencies in 125 KHz selectable from 189 frequencies in 125 kHz steps 960 frequencies in 25kHz steps steps 960 frequencies in 25 kHz steps 1 4 wave length wire 32 kHz 15 dBu 25 dBu AO Hz to 18 kHz typical 5 kHz Cat 1 kHz modulation 60 CB or more 5 kHz deviation at 1 kHz modulation A weighted 3 pole mini jack unbalanced 58 dBm 3 5 mm 5 32 inch dia stereo mini jack 5 mW at 16 Q Operating channel number frequency audio output status RF input level tuner battery status and accumulated operating time Operating channel number frequency audio output status RF input level RF input status DC 3 0 V with two AA size alkaline LR6 batteries Approx six hours with Sony s AA size alkaline LR6 batteries at 25 C 77 F 63
7. DWI PO1 TRANSMITTING SECTION Oscillator Carrier frequency range CE6267 Channel step RF power output Occupied RF bandwidth Audio delay AUDIO SECTION MIC Maximum input level LINE Audio attenuator adjustment range pad Input connector Input impedance GENERAL Operating voltage Battery life Dimensions W x H x D Mass Supplied accessories Crystal controlled PLL synthesiser 798 to 822MHz TV 62 to 64 channels 838 to 862MHz TV 67 to 69 channels 25kHz 1 mW 10 mW 50 mW e r p selectable 192kHz IESIMS 22qBu with OdB attenuator 24dBu O to 480B 3 dB steps MIC input mode only Sony 4 pin SMC9 4S x1 4kQ or more DC 3 0 V two LR6 AA size alkaline batteries Approx 3 5 hours at 10 mW output at 25 C 77 F with Sony LR6 AA size alkaline batteries Approx 63 x 73 x 17 mm excluding projection Approx 125 g including batteries Soft case x1 Spare battery case x1 Microphone cable 4 pin to XLR 3 pin x1 USB adapter cable x1 USB cable x1 Carrying case x1 Frequency list x1 Operating instructions x1 Crystal controlled PLL synthesiser 798 to 822MHz TV 62 to 64 channels 838 to 862MHz TV 67 to 69 channels 25kHz 1 mW 10 mW 50 mW e r p selectable 192kHz ESMS 22qdBu with OcB attenuator 24qBu O to 48qB 3 dAB steps MIC input mode only XLR 3 11C female x1 4 KQO or more DC 3 0 V two LR6 AA size alkaline batteries Approx
8. gt Durable connecting mechanism with a microphone for dependable operation gt Backlit LCD with an extensive information display Operating channel number and its frequency in MHz attenuator level audio input status RF output status transmitter battery status and accumulated operating time gt Approximately six hours of continuous operation with SONY two AA size alkaline LR6 batteries at 25 C 77 F at 50 MW output power gt Supplied with a soft case UTX B2 Bodypack Transmitter gt Extremely compact lightweight and robust metal body gt 63 x 82 5 x 18 7 mm 2 1 2 x 3 1 4 x 3 4 inches excluding the antennas gt Approx 145 g 5 1 oz including batteries gt Switchable MIC LINE input level and adjustable attenuator O to 21qB 3cB steps gt Selectable RF output power 5 mW for multi channel operations or 30 mW for long distance transmission gt Backlit LCD with an extensive information display Operating channel number and its frequency in MHz attenuator level RF output level setting High Low audio input status RF output status transmitter battery status and accumulated operating time gt Approximately eight hours of continuous operation with two AA size alkaline LR6 batteries at 25 C 77 F gt Supplied with a microphone windscreen x3 at 30 mW output power microphone holder clip and belt clip gt Equipped with a 3 pole mini jack connector with lock gt UTX B2X Comes with a uni directio
9. mW output power gt Supplied with a microphone holder Professional Audio Optional Accessories MB X6 SRP X 100 Tuner Base Unit for UWP X Series and WRU 806B Rack mount Audio Mixer SRP XSOOP SRP X700P Digital Powered Mixer for UWP X Series and WRU 806B Digital Powered Mixer for UWP X Series and WRU 806B ECM 77BMP ECM 44BMP ECM 166BMP ECM 322BMP AN 820A Lavalier Microphone Lavalier Microphone Lavalier Microphone Lavalier Microphone UHF Antenna BLC BP2 SMAD P2 BATC 2AA EC 0 46BX Spring Clip x2 Camera Mount Adaptor x1 Battery Carrier Case x Output Cable x1 EC 0 8BM EC 1 5BX AD RV1B AD RX7B Output Cable x1 Inout Cable x1 Windshield Pack x12 Windshield Pack x6 SAD HV1B ECM V1BMP ECM X7BMP Microphone Clip Pack x4 Omni x Cardioid x1 Professional Audio Wireless Microphones Wireless Microphone Tuner Wired Microphone and Camcorder Combinations Camcorder Interface for Microphone Front Rear MODEL NAME Built in Wireless DC Output for Slot Wireless Tuner Mic Input Mic Line Input Connector Connector HDCAM Camcorders HDW F9OOR HDW 790P ECM 678 ECM 680S Requires XLR 3P a Yes Yes XLR 5 pin x1 XLR 3 pin x2 3 m E ECM 680S Requires XLR 5P HDW 730S XLR 3P 2 Cable ECM 678 E Yes Yes XLR 3 pin x1 XLR 3 pin x2 ea mT HDW 650P ECM 680S ECM 678 a Yes Yes XLR 5 pin x1 XLR 3 pin x2 tT Digital Betacam Camcorder ECM 680S T Requires XLR 5P Po XLR 3P 2 Cable ECM 678
10. the digital wireless microphone system allows highly stable and secure wireless transmission that is extremely tolerant to RF interference The system transmits digitally modulated and encrypted datato minimise the risk of interception providing highly secure transmission For secure and confidential communication the system provides two Communication modes peer to peer mode and password mode In addition the system allows for an increase of up to 60 2 in the number of simultaneous digital wireless systems in use compared to conventional analogue wireless systems which gives users enhanced system flexibility Furthermore the system offers a metadata handling capability that provides highly innovative full wireless remote operations between the transmitter and receiver dramatically improving operational efficiency With its excellent audio quality system flexibility and operational efficiency the Sony digital wireless microphone system opens up a whole new world of professional audio applications The digital wireless microphone system is not available in some countries 2 When operating on an 8MHz bandwidth TV channel in Europe IN peer to peer mode wireless Communication between a DWIT BO1 transmitter and DWR SO1D receiver can be established by exchanging an encryption key that is generated by the transmitter In password mode multiple transmitters and receivers can be configured by setting all devices with the same user d
11. x 104 5 x 22 mm 2 1 2x 4 1 8 x 7 8 inches excluding the antennas DC 9 0 V 57 x 26x 121 mm 2 1 4x 1 1 16 x 4 7 8 inches Approx 205 g 7 2 oz including batteries Approx 150 g 5 3 oz Shoe mount adapter x1 Belt clip x1 Output cable x1 each 3 pole locking mini plug XLR type 3 pole locking mini plug stereo mini plug Operating instructions x1 Operating instructions x1
12. 057 B Mount Bracket and BIA 801or DWAO01D aon Requires A 8278 057 B Mount Bracket and BIA 801or DWAO01D anu Requires A 8278 057 B Mount Bracket and BIA 801or DWAO01D aon Requires A 8278 057 B Mount Bracket and BIA 801or DWAO01D aon Requires A 8278 057 B Mount Bracket and BIA 801or DWA01D aon Requires A 8278 057 B Mount Bracket and BIA 801or DWAO01D anu Requires A 8278 057 B Mount Bracket and BIA 801or DWA01D TT Requires A 8278 057 B Mount Bracket and BIA 801or DWA O01D aon Requires A 8278 057 B Mount Bracket FE Requires A 8278 057 B Mount Bracket EE Requires A 8278 057 B Mount Bracket FE Requires A 8278 057 B Mount Bracket FE Requires A 8278 057 B Mount Bracket PE Requires A 8278 057 B Mount Bracket EE Requires A 8278 057 B Mount Bracket FE Requires A 8278 057 B Mount Bracket FE Requires A 8278 057 B Mount Bracket Pe Requires A 8278 057 B Mount Bracket PE Direct slot in Direct slot in Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit ao i Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit Sali Requires A 8278 057 B Mount Bracket and DWA 01D Max 1 unit J i Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit ae i Requires A 8278 057 B Mount Bracket and DWA 01D Max 1 unit oe i Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit oF i Req
13. 6 UWP X7 and UWP X8 for a much higher level of stability mobility robustness and operational convenience Each package comes with both a transmitter and a receiver allowing you to get up and running straight from the box gt Tone Squelch Circuitry The UWP Series transmitters transmit a 32kHz pilot tone signal along with the audio signal The tuner s squelch circuit recognises this tone signal and outputs the audio signal only when this tone signal is received This function virtually prevents the output of unwanted signals and noise from other signal transmissions in the air as well as the RF noise and popping noise that occur when the transmitter is powered on or Off Pre programmed Operating Frequencies The transmitters and tuners included in the UWP series incorporate groups of intermodulation free pre programmed frequencies that have been carefully calculated and practically tested By selecting from these pre programmed frequency groups users can quickly and easily operate up to 16 wireless microphones simultaneously Auto channel Scanning Function The URX P2 portable receiver and URX M2 tuner module provide a convenient auto channel scanning function that allows for fast easy and safe frequency channel changes These models automatically detect unoccupied channels allowing operators easily to select the most appropriate channel to use Professional Audio Wireless Microphones UWP V1 UHF Wireless
14. 6 AA size alkaline batteries Dimensions Mass Supplied accessories WRT 8B 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 Crystal controlled PLL synthesiser FOE 10 mW or 50 mW e r p selectable 1 4 wave length wire antenna SMA J type connector 5 kHz 60 ABV 1 kHz input MIC position 5 kHz 20 dBu 1 kHz input LINE position 40 Hz to 20 kHz typical 60 OB or more A weighted at reference deviation O to 40 AB continuous 2 ABV 1 kHz input MIC position 38 dBu 1 kHz input LINE position Sony 4 pin SMC9 AS 1 DC 3 0 V two LR6 AA size alkaline batteries Approx 6 hours at 50 mW output Approx 13 hours at 10 mW output 63 x 83 x 17 mm 2 1 2 x 3 3 8 x 11 16 inches Approx 140 g 4 9 oz including batteries Soft case 1 Soare battery case 1 Micro phone cable 1 Operating instructions 1 WRT 847B 798 MHz to 822MHz 62CE7 838 MHz to 862MHz 67CE7 Crystal controlled PLL synthesiser F3E 10 mW or 50 mW e r p selectable 50 Q load 1 4 wave length wire antenna 5 kHz 94qB SPL 1kHz 50 Hz to 18 kHz typical 60 dB or more A weighted at reference deviation 12 CB to 9 CB variable in 3 dB steps 142 dB SPL with CU F780 G780 E700 F117 at audio gain 12 dB 120 OB SPL with CU E672 Interchangeable Optional DC 3 0 V two LR6 AA size alkaline batteries Approx 8 hours 37 x 150 mm 1 1 2 x 6 inches Approx 190 g 6 7 oz in
15. ECM 88BC ECM 77BC ECM 66BC ECM 44BC ECM 166BC Lavalier Microphone Lavalier Microphone Lavalier Microphone Lavalier Microphone Lavalier Microphone for WRT 8B WRT 822B for WRT 8B WRT 822B for WRT 8B WRT 822B for WRT 8B WRT 822B for WRT 8B WRT 822B ECM 322BC BTA 801 DWA O1D CA WR855 A 8278 057 B Headset Microphone Portable Tuner Mount Digital Wireless Adapter Camera Adapter Mounting Bracket for WRT 8B WRT 822B Adapter for WRR 855S for WRR 855S WRR 855B for WRR 855S WRR 855B for WRR 862B WIRR 855S WRR 855B X X SZ lt ECJFSCH DMX P01 Microphone Cable Digital Portable Mixer for WRT 8B WRR 822B Specifications Professional Audio Carrier frequency range Circuit system Oscillator Type of emission RF power output Antenna Reference deviation Frequency response Signal to noise ratio Audio attenuator adjustment range pad Max input level Input connectors Operating voltage Battery life at 25 C 77 F with Sony LR6 AA size alkaline batteries Dimensions W x H x D Mass Supplied accessories When not supplying power to the microphones Carrier frequency range Oscillator Type of emission RF power output Antenna Reference deviation Frequency response Signal to noise ratio Audio attenuator adjustment range pad Max input sound pressure level Microphone capsule Directivity Operating voltage Battery life at 25 C 77 F with Sony LR
16. Microphone Package Consists of UTX B2 bodypack transmitter and URX P2 portable receiver UTX B2 bodypack transmitter gt Extremely compact lightweight and robust metal body gt Switchable MIC LINE input level and adjustable attenuator 0 to 21d B 3qB steps gt Supplied omni directional lavalier microphone utilises a newly developed miniature metal body URX P2 portable receiver gt Compact lightweight and robust metal body well suited for use with Sony s professional camcorders gt Convenient auto channel scanning function allowing automatic search for unoccupied channels Supplied accessories gt UTX B2 Omni directional lavalier microphone x1 windscreen x3 microphone holder clip x1 belt clip x1 gt URX P2 Shoe mount adapter x1 belt clip x1 cables 3 pole locking mini plug XLR type and 3 pole locking mini olug stereo mini plug x1 each UWP V2 UHF Wireless Microphone Package Consists of UIX H2 handheld microphone and URX P2 portable receiver UTX H2 handheld microphone gt Incorporates a uni directional dynamic microphone capsule with minimised popping and wind noise URX P2 portable receiver gt Compact lightweight and robust metal body well suited for use with Sony s professional camcorders gt Convenient auto channel scanning function allowing automatic search for unoccupied channels Supplied accessories gt UTX H2 Microphone holder x1 gt URX P2 Shoe mount adapter
17. O1 DWIT PO1 transmitters isselectable from either MIC or LINE When MIC is selected the attenuator can be adjusted in 3dB steps from OdB to 48dB The reference input level of the MIC and LINE is 58dBu 60d0BV and 4dBu respectively 48 V Microphone Power DWT PO1 only via XLR connector DWR SOID Digital Wireless Receiver Industry first Two channel Slot in Wireless Receiver The DWR SOID is an industry first two channel digital wireless receiver that offers an ideal solution for high quality ENG and EFP applications Despite its dual channel receiver capability the DWR SO1D receiver is small enough to be mounted directly in the slot of the Sony PDW 700 XDCAM HD422 camcorder maintaining the well balanced design and compactness of the camcorder Through the direct mount high quality digital audio transmitted from a DWI BO1 transmitter can be recorded directly to the camcorder via a D sub 15 pin interface without the need for any signal conversions Rear Mounting to Camcorders In addition to the slot in capability for the PDW 700 XDCAM HD422 camcorder the DWR SO1D receiver can be rear mounted to a range of Sony professional camcorders such as the HDCAM XDCAM XDCAM HD Digital Betacam and MPEG IMX Series camcorders using the DWA 01D adapter When used with a camcorder that has AES EBU inputs full digital audio recording is also possible Compact Lightweight and Rugged Design Despite having a number of stunning f
18. V A 01D Digital Wireless Adapter Features Camcorder Rear mount Operation The DWA 01D adapter allows the DWR SO1D receiver to be rear mounted on a range of Sony professional camcorders such as HDCAM XDCAM XDCAM HD Digital Betacam and MPEG IMX camcorders In addition the DWA 01D adapter can be used with the current analogue wireless receiver WRR 855S 855B Requires an optional mount bracket A 8278 057B 2 Output from the DWA 01D and WRIR 855S 855B is one channel analogue audio signal only Stand alone Wireless Receiver Operation In addition to camcorder mounting the DWR SO1D receiver with DWA 01D adapter can also work as a stand alone wireless receiver This in combination with a digital audio mixer such as the Sony DMX PO1 creates a compact portable EFP digital wireless microphone system Requires DC power supply from a connected unit via a 4 pin connector Wide Array of Interfaces The DWA 01D adapter comes equipped with a wide range of interfaces optimised for diverse operational needs gt SMC9 4S Sony 4 pin x2 Outputs either AES EBU or analogue audio signals gt Word Sync input Allows the digital wireless microphone system to synchronise with an external word sync signal gt Stereo headphone output Offers easy monitoring of the output sound switchable between Tuner 1 Tuner 2 Mixed Unique Lock together Mechanism The DWA 0O1D adapter is equipped with a connecting bracket that al
19. a USB keyboard from which users can easily change a variety of settings In addition by connecting the transmitter and receiver directly to each other via the supplied USB cable the encryption keys required for confidential peer to peer Communication can be exchanged manually or automatically Wireless Microphones Professional Audio DWF B01 DWF POL Digital Wireless Transmitters Features Wide RF Carrier Frequency Range The DWIT BO1 DWIT PO1 transmitters cover an extremely wide RF carrier frequency range much wider than the 24MHz band of the analogue wireless microphone system The CE6267 models can cover a 48MHz band This remarkably wide coverage on a single model offers cost efficiency and operational convenience because it allows one transmitter to be operated in many different countries 1 The DWR SO1D receiver supports a 24MHz band RF carrier frequency range 798 to 822MHz IV 62 to 64 channels and 838 to 862MHz TV 67 to 69 channels Selectable RF Output Power 1 10 50 mW The DWT BO1 DWT PO1 transmitters provide a choice of RF output powers The 1 and 10 mW output is suitable for multi channel operations such as theatre and studio productions while the 50 mW output is intended for long distance transmissions such as sports and news coverage Power Sleep Mode The DWIT BO1 DWI PO1 transmitters are equipped with a power sleep wake up mode that can be wirelessly controlled from the DWI SO1D receiver Whe
20. al body gt Switchable MIC LINE input level and adjustable attenuator 0 to 21d B 3dB steps gt Comes with a uni directional lavalier microphone URX M2 tuner module gt Installed into the MB X6 tuner unit or the SRP X500P X700P all in one type presentation mixer amplifier gt Convenient auto channel scanning function allowing automatic search for unoccupied channels Supplied accessories gt UTX B2 Uni directional lavalier microphone x1 windscreen x1 microphone holder clip x1 belt clip x1 UWP X8 UHF Wireless Microphone Package Consists of UIX H2 handheld microphone and URX M2 tuner module UTX H2 handheld microphone gt Incorporates a uni directional dynamic microphone capsule with minimised popping and wind noise URX M2 tuner module gt Installed into the MB X6 tuner unit or the SRP X500P X700P all in one type presentation mixer amplifier gt Convenient auto channel scanning function allowing automatic search for unoccupied channels supplied accessories gt UTX H2 Microphone holder x1 UIX P1 Plug on Transmitter gt Converts a wired microphone to a wireless microphone via an XLR connector gt Compact lightweight and robust metal body providing great balance when handling gt Switchable MIC LINE input level gt 50 mW RF output power for stable and long distance transmission gt Attenuator function allows adjustment of the microphone input level O to 21dB 3dB steps
21. at reference deviation XLR 3 32 type 4 balanced D sub 15 pin 1 for sub output female unbalanced O dB 5 OB 10 dB or 15 dB Inputs BNC R type x2 50 Q nominal Outputs for cascade connection BNC R type 2 50 Q nominal 5 mW or more 24 to 45 yO load 6 channels when accommodating 6 WRU 806B tuner modules 798 MHz to 822 MHz 20 dBu LINE 58dBu MIC at reference deviation XLR 3 32 7 balanced O dB or 10 cB Inputs BNC R type 2 50 Q nominal 6 3 mm dia stereo mini jack 1 RJ 45 1 10BASE T AC 120 V 50 60 Hz AC 230 V 50 60 Hz 30 W when accommodating six WRU 806B tuner modules 482 x 44 x 285 mm 19 x 1 3 4 x 11 7 8 inches 50 W when accommodating four WRU 8N tuner modules 482 x 44 x 300 mm 19 x 1 3 4 x 11 7 8 inches Approx 3 7 kg 8 Ib 6 oz AC power cord x1 Antennas 1 pair CD ROM contains operating instructions and MB 8N supplied software x1 Approx 5 5 kg 12 Ib 2 oz AC power cord x1 Antennas 1 pair Operating instructions x1 WRU 8N WRU 806B 1 channel 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 Ist PLL synthesiser 2nd Crystal oscillator 1 channel 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 PLL synthesiser 50 us 50 us 5 kHz deviation at 1 kHz modulation Maximum deviation 40 kHz deviation at 1 kHz modulation 60 daB or more at 250 kHz 40Hz to 20kHz Typical 60 OB or more 65 CB typical at 60 dBu RF inpu
22. atures Superb Quality Wireless Transmission The digital wireless microphone system transmits high quality 24 bit 48kHz sampling digital audio signals in a specific frequency bandwidth that meets the wireless communication regulations of each country Utilising an original Sony codec based on Sony s many years of experience in engineering audio products the system delivers a wide dynamic range of more than 106cB a wide frequency response of 20Hz to 20kHz and an excellent system latency of 3 6 ms Simultaneous Multi channel Operation The digital wireless microphone system allows for large scale multi channel operations Thanks to the newly developed digital modulator the system realises an intermodulation free equally soaced channel allocation The digital wireless transmission technology used in this system enables a significant increase in the number of simultaneous digital wireless systems in Comparison with current analogue wireless systems For example up to 16 channels of simultaneous operation is possible in an 8MHz bandwidth TV channel in Europe This system also provides the option of using existing WL 800 Series channel plans In this configuration the digital wireless system reliably operates alongside the WL 800 Series analogue wireless systems without concern for having analogue and digital wireless systems interfering with each other Stable and Secure Transmission Incorporating a newly developed digital modulator
23. by external DC power 40 to 52V or battery AAssize Specifications Professional Audio Oscillator Type of emission CE62 Carrier frequencies CE67 RF power output Antenna Pilot tone signal Frequency response Reference deviation Signal to noise ratio Microphone capsule Audio attenuator adjustment range Audio input level Audio input connector Max input sound pressure level LCD Indicators LCD Power requirements Battery life Dimensions W x H x D Mass Supplied accessories UTX B2 UTX H2 UTX P1 Crystal controlled PLL Synthesiser F3E 798 MHz to 822 MHz IV 62 to 64 channels selectable from 189 frequencies in 125 kHz steps 960 frequencies in 25 kHz steps 838MHz to 862MHz TV 67 to 69 channels selectable from 189 frequencies in 125 kHz steps 960 frequencies in 25 kHz steps 30 mW 5 mW selectable 1 4 wave length wire 40 Hz to 18 kHz typical 7 kHz 60 COBV 1 kHz input 60 OB or more 7 kHz deviation at 1 kHz modulation A weighted Electret condenser omni directional UTX B2V Electret condenser uni directional UTX B2X O cB to 21 GB Cin 3 CB steps Mic input MIC 60 AdBV at 0 dB attenuator level LINE 4 dBu 3 pole mini jack at 21d0B attenuator level Operating channel number frequency attenuator level RF output level High Low audio input status transmit ter battery status and accu mulated operating time Audio
24. ces the risk of mis operation gt The WRT 807A offers 5 hours of operating life from a single AA battery This is achieved by utilising a specialised DC to DC converter to provide stable performance throughout the active life of the batteries This is especially important in maintaining good RF transmission Professional Audio Wireless Microphones C U F780 Capsule Unit Features gt Dynamic microphone capsule with super cardioid polar pattern gt Uses the same high quality edgewise winding CCAW voice coil that is employed in the acclaimed Sony F 780 wired microphone gt Designed for vocal applications including live music performance gt Frequency response 50Hz to 18kHz gt Dimensions 51 x 90 mm 2 1 8 x 3 5 8 inches gt Mass 180 g 6 3 oz Characteristics bDirectivity Characteristics 1 00Hz 2 ETRE he hfe NE V AN WSs A SW RST o LUR L 20 KUE 90 Frequency Response Characteristics N oOo a TE Ne rar EZR aN T SINE tae TT SCE nn 20 50 100 200 500 1k 2k 5k 10k 20k Hz Oo Response CB Frequency Hz 90 180 C U E700 Capsule Unit Features gt Electret condenser microphone capsule with super cardioid polar pattern gt Smooth frequency response for natural sound reproduction gt Suitable for critical vocal and speech applications gt Frequency response 50Hz to 18kHz gt Max SPL 150dcB gt Dimensions
25. cluding batteries Microphone holder 1 Stand adapter 1 Channel colour seal 1 Softcase 1 Operating instructions 1 WRT 822B 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 Crystal controlled PLL synthesiser FOE 20 mW 50 Q load 1 4 wave length wire antenna 5 kHz 60dBV 1kHz input 70 Hz to 15 kHz typical 60 cB A weighted at reference deviation O to 21 GB variable in 3 dB step 3 ABV with 21 dB attenuator Sony 4 pin SMC9 4S 1 DC 3 0 V two LR6 AA size alkaline batteries DC 3 0 V two LR6 AA size alkaline batteries 63 x 103 x 17 mm 2 1 2x 4 1 8 x 11 16 inches Approx 145 g 5 1 oz including batteries Leatherette case 1 Operating instructions 1 WRT 807B 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 Crystal controlled PLL synthesiser FOE 10 mW 50 Q load 1 4 wave length wire antenna 5 kHz 94qB SPL 1kHz 50 Hz to 15kHz typical 60 GB or more A weighted at reference deviation O to 21 GB variable in 3 dB steps 1510B SPL with 21dB attenuator Dynamic Uni directional DC 1 5 V one LR6 AA size alkaline battery Approx 5 hours 51 x 238 mm 2 1 8 x 9 3 8 inches Approx 440 g 15 5 oz including battery Microphone holder 1 Channel colour seal 1 Operating instructions 1 specifications Professional Audio Receiving channels Receiving frequency range Local oscillators 2nd Crystal oscillator De emphas
26. esignated password In addition this mode supports broadcast communication which enables multiple receivers to receive audio signals from one transmitter Pre programmed Frequency Groups To make it easy to choose the correct frequencies for simultaneous multi channel operation the optimum intermodulation free frequencies are stored on each DWR SO1D receiver These frequencies all of which have been calculated and tested are arranged in groups with each group pre programmed to allow interference free operation The digital wireless microphone system operates within the following frequency ranges Frequency range 798 to 822MHz TV 62 to 64 channels 838 to 862MHz TV 67 to 69 channels 798 to 822MHz TV CE62 62 to 64 channels DWT BO1 transmitter CE6267 DWR SO1D saa 838 to 862MHz IV O Z CEO 67 to 69 channels The DWR SO1D receiver supports a 24MHz band RF carrier frequency range When using the DWR SO1D receiver in either the 798 to 822MHz TV 62 to 64 channels or 838 to 862MHz TV 67 to 69 channels frequency range please contact your nearest Sony office or authorised dealer Audio RF Signal TX Information E Display gt Audio input peak level gt Battery remaining capacity gt Low cut filter frequency gt Attenuator level Metadata gt Audio input peak level gt Battery remaining capacity gt Low cut filter frequency gt Transmitter name gt Attenuator level gt Etc
27. gt Transmitter name DWI BO1 gt Etc Digital Wireless DWR SO1D Transmitter Digital Wireless Receiver Audio RF Signal os i a Ges Oa Metadata J gt Audio input peak level PDW 700 gt Battery remaining XDCAM HD422 capacity Camcorder gt Low cut filter frequency gt Attenuator level gt Transmitter name gt Etc DWIT BO 1 Digital Wireless Transmitter K Wireless Remote Control TX FREQUENCY setting TX RF POWER setting TX ATT LEVEL setting TX LCF FREQUENCY setting TX POWER MODE setting DWR S01D Digital Wireless Receiver Metadata Transmission In addition to audio signals a variety of information about the DWT BO1 transmitter such as audio input peak level remaining battery capacity low cut filter frequency and attenuator level can be wirelessly transmitted to the DWR SO1 receiver as metadata This allows users to monitor the status of the transmitter from the DWR SO1D receiver offering high operational convenience Innovative Wireless Remote Control Wireless remote control capability of the Sony digital wireless microphone system is one of the most distinctive user features that digital transmission technology has made possible A variety of DWT BO1 transmitter settings such as power on sleep attenuator level low cut filter frequency and RF power output level can be wirelessly controlled from the DWR SO1D receiver This is highly conven
28. ient because setting changes can be made very easily even after the transmitters are attached to an actor or reporter Furthermore when the DWI SO1 receiver is used with the PDW 700 XDCAM HD422 camcorder users can monitor the status of the digital wireless microphone system through the camcorder s viewfinder They can also wirelessly control the settings of the DWT BO1 transmitter via the camcorder menu This wireless control makes use of 2 4GHz IEEE802 15 4 communication technology which is commonly available worldwide Communicating via this wireless remote technology in no way affects the audio or RF signals of either the digital or analogue wireless microphone systems In addition it is ideal for large scale multi channel system management and is effective for low power consumption Easy to see Full Dot matrix OLED Organic Light Emitting Diode Display The DWIT BO1 transmitter and DWR SO1D receiver have an easy to see OLED display providing a variety of information such as operating channel frequency AF inout level RF output level and battery status The quick response of the OLED display enables real time operating conditions such as the audio level meter to be displayed clearly and accurately In addition the OLED provides a high level of visibility even in low temperature or low light environments USB Interface The DWT BO1 transmitter and DWR SO1ID receiver come equipped with a USB interface This is used to Connect
29. input status 1 4 wave length wire internal 32kHz 50 mW Integral type 50 Hz to 18 kHz typical 7 kHz 94 daB SPL 1 kHz input Dynamic uni directional O dB to 21 CB in 3 CB steps 151qB SPL Power status 10 kHz 60 ABV 1 kHz input 600B or more 10 kHz deviation at 1 kHz modulation O CB to 21 CB in 3 CB steps Mic input MIC 60 dBV at 0 dB attenuator level LINE 4 dBu XLR 3 11C type Operating channel number frequency attenuator level audio input status RF output status transmitter battery status and accumulated operating time Audio input status DC 3 0 V with two AA size alkaline LR6 batteries Approx eight hours with Sony s AA size alkaline LR6 batteries at 25 C 77 F at 30 mW output 63 x 82 5 x 18 7 mm 2 1 2 x 3 1 4 x 3 4 inches excluding the antennas Approx 145 g 5 1 oz including batteries UTX B2V Omni directional lavalier microphone Wind screen x3 Microphone holder clip x1 Belt clip x1 Operating instructions Lavalier microphone x1 Windscreen x1 Micro Phone holder clip x1 Belt clip 49 x 253 mm 1 15 16 x 10 inches Approx 308 g 11 02 including batteries Microphone holder x1 x1 UTX B2X Uni directional Operating instructions x1 Approx six hours with Sony s AA size alkaline LR6 batteries at 25 C 77 F at 50 mW output 44 x 99 x 36 mm 1 3 4x 4x 1 7 16 inches Approx 185 g
30. instructions x1 WRI 822B 1 channel 798 MHz to 822 MHz 62CE7 838 MHz to 862 MHz 67CE7 Ist PLL synthesiser 2nd PLL synthesiser 50 us 5 kHz deviation at 1 kHz modulation Maximum deviation 40 kHz deviation at 1 kHz modulation 60 GB or more at 250 kHz 80 dB or more 40 Hz to 18 kHz typical 60 dB or more at 60 dBu RF input at reference deviation A weighted 10 dBu or OFF 40 dBu at reference deviation D sub 15 pin 1 unbalanced BNC R type 2 50 Q nominal External DC 7 V 200 mA or less at external DC 7 V 88 0 x 119 0 x 31 3 mm 3 1 2 x 4 3 4 x 1 1 4 inches Approx 280 g 10 0 oz Antennas 1 pair Operating instructions x1 Receiving channels Receiving frequency range Audio output level deviation Audio output connector Antenna attenuator level Antenna connector Monitor output level Monitor output connector Network connector Operating voltage Current power Consumption Dimensions W x H x D Mass Supplied accessories Receiving channels Receiving frequency range Local oscillators De emphasis Reference deviation Selectivity Frequency range Signal to noise ratio RF muting squelch level Operating voltage Current bower consumption Dimensions W x H x D Mass Supplied accessories MB 8N MB X6 4 channels when accommodating 4 WRU 8N tuner modules 566 MHz to 806 MHz USA type 758 MHz to 862 MHz AU type 20 dBm LINE 58 dBm MIC
31. is Reference deviation Selectivity Spurious rejection Frequency range Signal to noise ratio RF muting squelch level Audio output level Audio output connector Antenna connector Monitor output connector Operating voltage Battery life at 25 C 77 F with Sony LR6 AA size alkaline batteries Current power consumption Dimensions W x H x D Mass Supplied accessories WRR 862B 2 channels 2 frequencies within 798 MHz to 822 MHz 62CE7 2 frequencies within 838 MHz to 862 MHz 67CE7 Ist PLL synthesiser 2nd Crystal oscillator 50 us 5 kHz deviation at 1 kHz modulation Maximum deviation 40 kHz deviation at 1 kHz modulation 60 dB or more at 250 kHz 70 OB or more 40 Hz to 18 kHz typical 60 OB or more 65 daB typical at 60 dBu RF input at reference deviation A weighted 5 dBu 10 dBu 15 dBu or OFF 58 dBm at reference deviation SMC9 4S Sony 4 pin 2 balanced BNC R type 2 50 Q nominal 3 5 mm dia mini jack 1 5 mW 1 Tuner 1 2 Mixed selectable Batteries DC 6 V four LR6 AA size alkaline batteries External DC 12 V Approx 5 hours Batteries approx 230 mA at DC 6 V External approx 135 mA at DC 12 V 89 0 x 120 0 x 29 5 mm 3 5 8 x 4 3 4 x 1 3 16 inches Approx 400 g 14 1 oz including batteries Attachment case x1 Mounting plate for use with optional A 8278 057 B mounting bracket x1 Antennas 1 pair Output cables x2 DC cable x1 Operating
32. k and plug on transmitters Remaining battery life is indicated on both the transmitter and receiver with additional indication approximate one hour before the battery goes dead On the receiver the battery indicator on the LCD and LED displays also flash helping to avoid the chance of battery failure at a critical moment 1 This may vary depending on the operational environment Consistent RF Power Output A DC DC convert circuit built into the power supply section of microphones transmitters assures consistent output power over the life of the batteries Channel Setting Back up Each unit has a convenient memory back up for storing operating frequencies When the power switch is turned on the previous channel setting is automatically recalled and displayed WRT 8B UHF Synthesised Transmitter Features gt Ultra compact and lightweight 140 g including batteries gt Selectable RF power output 50 mW output for long distance transmission or 10 mW output for multi channel simultaneous operation gt Switchable input level LINE or MIC level and attenuator level control knob gt SMA J type removable antenna gt Approximately 13 hours of continuous operation with two AA size alkaline LR6 batteries at 10 mW output gt Accepts the output of professional lavalier microphones equipped with a Sony 4 pin connector SMC9 4P WRT 3847B UHF Synthesised Transmitter Unit Features gt Five optional micr
33. lows two DWA OID adapters to be easily combined This is particularly convenient for when two pairs of the DWR SO1D receiver and DWA 01D adapter are used at the same time as a stand alone four channel receiver system Optional Accessories Soecifications Professional Audio ECM 88BC ECM 322BC ECM 77BC F 112 ECM 66BC Lavalier Microphone Headset Microphone Lavalier Microphone Dynamic Microphone Lavalier Microphone DMX P01 ECM 44BC A 8278 057 B Digital Portable Mixer Lavalier Microphone Mounting Bracket System specifications Sampling frequency 48 kHz Quantisation bit length 24 bit at OcB audio LINE 4 dBu 1 kHz Analogue output 58 dBu Reference output level AES EBU output 36 qABFs 20 ABFS switchable Analogue output 22 dBu Maximum output level AES EBU output O dBFs Frequency response 20 Hz to 20 kHz Dynamic range 106 qB typical A weighted T H D 1 Distortion T H D 0 03 or less Modulation method 0 4 Shift QPSK Audio delay 3 6 Ms Remote control 2 4 GHz IEEE802 15 4 compliant USB USB 2 0 compliant Specifications Professional Audio DWI B01 TRANSMITTING SECTION Oscillator Carrier frequency range CE6267 Channel step RF power output Occupied RF bandwidth Audio delay AUDIO SECTION MIC Maximum input level LINE Audio attenuator adjustment range pad Input connector Input impedance GENERAL Operating voltage Battery life Dimensions W x H x D Mass Supplied accessories
34. nal lavalier mechanism microphone 11 5 mm gt UTX B2V Comes with a newly developed miniature gt 1 2 m 3 9 feet microphone cable metal body omni directional lavalier microphone gt Supplied with a microphone windscreen x1 6 8 mm microphone holder clip and belt clip gt Clear and criso sound pick up with minimised popping Baa iad iacicc gt Supplied battery cartridge is compatible with those of URX P2 and Sony s WL 800 Series allowing quick gt 1 2 m 3 9 feet microphone cable and easy battery exchange between these models Wireless Microphones Professional Audio UIX H2 Handheld Microphone gt Compact lightweight and robust metal body gt 49 x 253 mm 1 15 16 x 10 inches gt Approx 308 g 11 oz including batteries gt Incorporates a uni directional dynamic microphone capsule that minimises popping and wind noise gt Selectable RF output power 5 mW for multi channel operations or 30 mW for long distance transmission gt Attenuator function allows adjustment of audio input level to suit each user s voice O to 21dB 3cB steps gt Internal LCD with an extensive information display Operating channel number and its frequency in MHz attenuator level RF output level setting High Low audio input status RF output status transmitter battery status and accumulated operating time gt Approximately eight hours of continuous operation with two AA size alkaline LR6 batteries at 25 C 77 F at 30
35. ne Yes Yes XLR 3 pin x1 XLR 3 pin x2 K 1504 Y MPEG IMX Camcorder ECM 680S Requires XLR 5P MSW 970P XLR 3P 2 Cable ECM 678 aE Yes Yes XLR 3 pin x1 XLR 3 pin x2 ree T XDCAM Camcorders ECM 680S PDW 5 10P Requires XLR 5P ECM 678 PDW 530P XLR 3P 2 Cable ECM 674 F Yes Yes XLR 3 pin x1 XLR 3 pin x2 3 Ns ECM 673 XDCAM HD Camcorders PDW F355L Sean PDW F335L K Beit Save ey eee Requires XLR 3P RE No Yes XLR 5 pin x1 XLR 3 pin x2 Tm M PDW 700 ECM 678 ECM 674 ECM 6808 ECM 673 5 0 2 nj 3 Requires XLR 3P SR Yes Yes XLR 5 pin x1 XLR 3 pin x2 lise XLR 5P Cable K 1502 DVCAM Camcorders DSR 4OOP ECM 680S DSR 450WSP Requires XLR 5P ECM 674 XLR 3P 2 Cabl oA ECM 673 ae No Yes XLR 3 pin x1 XLR 3 pin x2 HDV Camcorder HVR S270E ECM 680S Requires XLR 5P ECM 678 4 XLR 3P 2 Cable ECM 674 No Yes XLR 3 pin x2 XLR 3 pin x2 One ECM 673 1 The ECM 674 can be driven by external DC power 40 to 52V or battery AA size 2 Recommend to use the BIA 801 or DWA 01D when using with 3rd party battery 3 AES EBU input can be selected for digital connection Been mT Direct slot in Direct slot in Direct slot in Direct slot in Direct slotin di Requires CA WR855 Mount Adaptor 2 an Direct slot in Requires CA WR855 Mount Adaptor T Requires A 8278 057 B Mount Bracket and BIA 801or DWA O01D aon Requires A 8278 057 B Mount Bracket and BIA 801or DWAO01D aon Requires A 8278
36. ons The metal body also allows for an extremely compact and lightweight design providing the high level of mobility required for ENG and EFP operations What s more the black body complements Sony s professional camcorders extremely well Stable Transmission and Reception The UWP Series Wireless Microphone Package uses three core technologies to provide stable transmission and reception gt PLL Synthesised System The UWP Series employs a UHF PLL Phase Locked Loop frequency synthesised system which provides a stable carrier signal that helps to avoid interference with other frequency channels and allows for easy access to multiple frequencies The PLL controlled system provides highly stable user selectable frequencies in increments of 125kKHz Users can choose from 189 frequencies gt Space Diversity Reception System Typically wireless microphone transmission systems can be subject to interruptions in reception signal dropout but the UWP Series reduces this to a minimum Utilising a soace diversity reception system it achieves stable reception by using dual antenna inputs reception circuits These receive signals over two different paths and automatically select the stronger RF signal for output The angle of the antennas on the portable receiver can also be adjusted which helps to further eliminate signal dropout Now Sony has further evolved the UWP Series by introducing five new packages the UWP V1 UWP V2 UWP V
37. ophone capsules are available providing a choice of characteristics that suit a range of different applications Microphone capsules are available individually One head is required for the WRT 847B to function gt Audio compander time constant is switchable to suit different capsules gt Selectable RF output level 10 mW for simultaneous multi channel operation and 50 mW for long distance operation gt Audio gain and attenuation setting from 9qB to 12qB in 3cB steps gt Lockable external power switch ON OFF gt Two AA size LR6 alkaline batteries provide approximately eight hours of continuous operation WRT 822B UHF Synthesised Transmitter Features gt Approximately six hours of continuous operation with two AA size LR6 alkaline batteries gt Compact lightweight magnesium alloy body gt 20 MW RF power output gt Accepts the output of professional lavalier microphones equipped with a Sony 4 pin connector SMC9 4P WRI 807B UHF Synthesised Transmitter Unit Features gt A high quality dynamic CCAW voice coil with AINiCO magnet is used in the WRI 807B providing a super cardioid response gt The use of a precision synthesiser PLL provides the combination of reliable RF transmission with pre programmed operating frequencies gt The WRIT 807B s LCD display and set up switches provide a simple to use control interface The display lockout mode and the locking on off switch greatly redu
38. reception system is used to eliminate signal dropout Dual antenna inputs and reception circuits incorporated in the diversity system receive signals over two different paths and select the stronger signal as the output This switching operation is undetectable on the audio output of the receivers Pre programmed Frequency Groups Optimum combinations of calculated and practically tested intermodulation free frequencies are stored in each receiver to make it easy to choose the correct frequencies for simultaneous multi channel operation These frequencies are arranged in groups with each group pre programmed to allow interference free operation Advanced Filtering The Sony wireless units all employ Helical Ceramic and or SAW Surface Acoustic Wave filters as appropriate This offers stable reception and superb audio quality and also enables the unique miniaturisation seen in most Sony products Tone Squelch Circuitry The wireless microphone transmitters also transmit a 32 768kHz pilot tone signal along with the audio signal In the receivers a squelch circuit is present and the audio signal is only output when the tone signal has been correctly received This squelch function is designed to virtually prevent the output of unwanted signals or noise from other signal transmissions in the air as well as the RF noise and popping noise that occur when the transmitter is powered on or off Offering a broad range of choices this famil
39. rever they are attached for example inside an actor s costume the operator can remotely control the transmitter s power on and sleep settings increasing operational convenience and battery savings Digital Low cut Filter Equipped with a digital low cut filter the DWT BO1 DWT PO1 transmitters can reduce the effects of undesired ambient noise Accommodates Various Types of Battery The DWT BO1 DWIT PO1 transmitters can be operated with either alkaline lithium or nickel metal hydride batteries The transmitters will operate continuously for approximately four hours when using two Sony AA size alkaline batteries at 25 C 77 F and 10 mW output power The operating time may vary depending on the operational environment IE A 01D 4204 638 500MHz OLED Screen USB Interface DWT B01 Lightweight and Rugged Design The DWIT BO1 DWT PO1 transmitters are designed to be extremely compact and lightweight essential qualities for users in fast moving TV and outdoor productions The DWIT BO1 measures 63 x 73 x 17 mm and weighs just 125 g including batteries The DWIT PO1l measures 44 x 78 x 44 mm excluding XLR and weighs 245 g 9 oz including batteries In addition the robust die cast magnesium body allows the DWIT B0O1 DWIT PO transmitters to withstand even the harshest of operational environments switchable Mic or Line Inout Level and Adjustable Attenuator The audio input level of the DWT B
40. ront panel The monitor output can be selected from individual WRU 8N tuner modules or mixed sound from all installed modules gt Computer based remote control is also possible via a standard Ethernet IOBASE T connection The supplied software allows full monitoring of the operating status and all control settings available on both the MB 8N and WRU 8N Multi channel settings can be stored as files Wireless Microphones Professional Audio WRU 8N UHF Synthesised Tuner Unit Features gt Plug in diversity tuner module for the MB 8N tuner base unit gt A jog dial allows operators to quickly choose the desired channel setting gt Pre programmed groups for interference free multi channel operation gt A red LED starts flashing approximately one hour before the transmitter s battery is exhausted gt Precise RF squelch level setting 1OdBu 20dBy 30dBu or OFF gt Space diversity reception for dependable RF reception This time may vary depending on the operational environment MB X6 Tuner Base Unit Features gt Accommodates up to six WRU 806B and UWP X Series for up to six channels of simultaneous operation gt Addition of the WD 850A allows multi channel operation with even more channels gt Easy mechanism for attaching and detaching tuner modules gt RF input attenuator switch 10dB OaB gt Balanced XLR output connector for each tuner and mix output gt Selectable outpu
41. t at reference deviation A weighted 10 dBu 20 dBu 30 dBu or off 5 kHz deviation at 1 kHz modulation Maximum deviation 40 kHz deviation at 1kHz modulation 60 dB or more at 250 kHz 70 Hz to 18 kHz typical 60 GOB or more at 60 dBu RF input at reference deviation A weighted 30 dBu DC 5 V supplied from MB 8N DC 9 V supplied from MB X6 225 MA or less 57 x 26 x 122 mm 2 1 4x 1 1 16 x 4 7 8 inches Approx 160 g 5 7 oz 260 mA or less 56 0 x 30 7 x 149 0 mm 2 1 4x 1 1 4x 5 7 8 inches Approx 165 g 5 8 oz Operating instructions x1 specifications Professional Audio Frequency range Channel distribution Inout output impedance Cascade output Power supply for antenna booster supplied from antenna input connectors Power consumption Dimensions W x H x D Mass Supplied accessories RF muting squelch level Audio output level Audio output connector Frequency range Antenna gain Output impedance Voltage standing wave ratio Noise figure Third intermodulation Dimensions W x H x D Output connector Supply voltage Current consumption Dimensions W x H x D Mass Supplied accessories WD 850A 758 MHz to 862 MHz Inputs 2 pairs Outputs 4 pairs 50 Q 1 pair DC 9 V OFF switchable 16 W 482 x 44 x 300 mm 19 x 1 3 4 x 11 7 8 inches Approx 4 6 kg 10 Ib 2 oz 50 Q BNC terminators 6 5 dBu 10 dBu 15 dBu or OFF 58 dBm at reference deviation
42. t level 58dBu for MIC or 20dBu for LINE at 5kHz deviation at 1kHz modulation gt Auto channel search function automatically selects unoccupied channels gt Supplied with passive antennas gt Modular 1U high 19 inch rack unit WRU 306B UHF Synthesised Tuner Unit Features gt Plug in diversity receiver module for MB X6 tuner base unit gt Pre programmed groups for interference free multi channel operation gt RF input status audio output status and battery alarm indications by both LED and LCD to double check operating condition gt Space diversity reception for dependable RF reception WD 850A UHF Antenna divider Features gt Provides diversity output for up to four receivers tuner gt Two pair of antenna input connectors for up to four base units AN 820A antennas to expand the operating area of a gt Multi channel operation by combination with the MB 8N wireless microphone system and WRU 8N or the MB X6 and WRU 806B gt Cascade output can be used for an additional antenna divider or receiver tuner base unit AN 820A UHF Antenna Features gt Built in RF amplifier 10dB gain gt Easy installation on a wall or on a microphone stand with the supplied stand adapter gt Used in pairs for diversity reception gt LED indication for installation check gt External power supply provided from the MB 8N X6 or the WD 850 via a coaxial cable Professional Audio Accessories
43. thane windscreen 1 Characteristics Directivity Characteristics j Ds rte Mee ecg bg 100Hz 1kHz ES ESSE 6kHz THK SHER TRIS TAP XNE TOTA E E IS AT 7 ONA OQ S Shy Se s SS Z cS BB Ls AAS C tH At WN FN i u A n eee o x 2 CA ey S ee Ly Frequency Response Characteristics Response CB Veo Fig 90 Wireless Microphones Professional Audio WRR 862B WARR 855S UHF Synthesised Dual Diversity Tuner UHF Synthesised Diversity Tuner Features Features gt Receives two independent RF signals simultaneously on gt Space Diversity Tuner for camcorder use two separate channels gt Easily mounts onto Sony HDCAM Digital Betacam gt Compact and lightweight 400 g 14 1 oz including XDCAM MPEG IMX camcorders without need for audio batteries power cables or a mounting adapter gt Two way powering Internal battery operation or gt Compact and lightweight design 280 g 11 oz operation on external power from Sony camcorders via gt A D sub 15 pin connector for audio output to a Sony the supplied cable professional camcorder and for receiving its power gt A red LED starts flashing approximately one hour before supply from the camcorder the transmitter s battery is exhausted gt A LCD provides various information such as RF input level gt Two Sony 4 pin SMC9 4S audio output connectors are and audio ou
44. tion Approx 250 g Audio cable x2 DC cable x1 Mount plate kit x1 Operating instructions x1 1 The DWR S01D receiver supports a 24MH Hz band RF carrier frequency range When using the DWR S01D receiver in either the 590 125 to 607 875MHz TV 34 to 36 channels 614 125 to 637 875MHz TV 38 to 41 channels or 662 125 to 697 875MHz TV 46 to 51 channels frequency range please contact your nearest Sony office or authorised dealers Wireless Microphones Professional Audio Analogue Wireless Microphone Product Range Since its introduction the unique qualities of the Sony WL 800 series UHF synthesised wireless microphone system have been proven in many different applications It has been particularly successful in critical applications such as broadcasting and production where its low noise wide audio dynamic range stable RF transmission reception and high reliability have been vital factors sony has continually enhanced its WL 800 Series to fulfil the ever increasing needs for wireless operations sony Wireless Microphone Common Features PLL Synthesised System Phase Locked Loop PLL frequency synthesised systems are employed both in transmitters and receivers assuring carrier stability and providing easy access to multiple frequencies These PLL controlled systems provide highly stable selectable frequencies to be generated in increments of 125kHz Space Diversity Reception System A space diversity
45. tput status provided on the top panel gt Switchable RF squelch levels ON dBy 1OdBu 15dByu or OFF gt Stereo mini jack for monitoring the output sound switchable Tuner 1 Tuner 2 Mixed with headphones gt Monitor volume control provided This time may vary depending on the operational environment A 8278 057 A Mounting Bracket BA sol Portable Tuner Mount Adapter Features Features gt Allows a WRIR 855S 855B portable tuner to be mounted gt For mounting any Sony portable tuner to Sony on a Sony professional camcorder professional camcorders which operate on Sony gt External DC power input via the supplied 4 pin cable Lithium lon battery packs MB 8SN Tuner Base Unit Features gt Accommodates up to four WRU 8N tuner modules in a a 1U high rack mountable chassis E g ae oS gt Built in antenna divider allows four MB 8Ns to be daisy s FF chained for up to 16 channel simultaneous operation without the need of an external divider gt Control settings such as audio output levels RF squelch levels attenuator levels for the installed tuner modules and power supply setting ON OFF for the connected AN 820A antennas are available from the front panel gt An auto channel assignment function for extra receiver modules with self detection and skipping of unusable channels gt A headphone monitor jack and level control knob are located on the f
46. uires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit oF Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit v Requires A 8278 057 B Mount Bracket and DWA 01D Max 1 unit S i Requires A 8278 057 B Mount Bracket and DWA O1D Max 1 unit a i Professional Audio Wireless Microphones Wireless Microphone Tuner Wired Microphone and Camcorder Combinations with Current UWP amp New UWP Camcorder Interface for Mic rophone eet DC Front Rear NAME eee Output for Mic Mic Line ee ate ae eee Slot Wireless Input Input Tuner Connector Connector XDCAM EX Camcorders PMW EX 1 EX3 ECM 680S ECM 673 Requires XLR 5P ECM 678 r No No XLR 3 pin x1 XLR 3P 2 Cable 4 HDV Camcorders HVR S270E ECM 680S ECM 673 ara Requires XLR SP ae P No Yes XLR 3 pin x XLR3 pinx2 XLR 3P Cable F ECM 680S ECM 673 Baie Requires XLR 5P ECM 674 g No No XIRS pin x2 XLR 3P 2 Cable ECM 678 iq e ECM 680S ECM 673 BRE Requires XLR 5P ECM 674 rr No No XLR 3 pin x2 XLR 3P 2 Cable ECM 678 g HVR V1E ECM 680S Requires XLR 5P 5 No No XLR 3 pin x2 e Oe E a HVR A1E ECM 680S Requires XLR 5P No No XLR 3 pin x2 I EC irare a 4 HVR HD1000E Stereo mini wi Me ne jack x H DVCAM Camcorder DSR PD 170P ECM 680S ECM 673 Requires XLR 5P 2 ed No No XLR 3 pin x1 XLR 3P Cobie FOM ve 4 187 i p 1 The ECM 674 can be driven
47. unctionalities such as its dual channel receiver capability the DWR SO1D is still highly compact and lightweight just like the existing analogue single channel wireless receiver WRR 855S 855B It measures only 88 x 117 8 x 31 3 mm and weighs just 280 g 9 oz Maintaining good balance even when mounted on a camcorder In addition the DWR SO1D is made of magnesium diecast and aluminium making it extremely rugged and suitable for the harsh environments of even the most demanding ENG EFP applications Auto channel Scanning Functions The DWR SOID receiver comes with two auto channel scanning functions that allow for fast easy and safe frequency channel changes Clear Scan mode auto matically seeks unoccupied channels from which operators can select the most appropriate channel to use While Active Channel mode searches for channels that are currently in use allowing operators to check whether the Channel is used by a transmitter in the same operational group or by other equipment that may interfere with the digital wireless transmission signal Wireless Remote Control The wireless remote control is an extremely efficient feature that enables the DWR SO1D receiver to control various settings of the DWT BO1 transmitter such as power on off attenuator level low cut filter frequency and RF power output level Rx 01D 4204 638 500MHz OLED Screen FM ail USB Interface Wireless Microphones Professional Audio D
48. y presents a solution to virtually any wireless microphone application from the very simple to the most sophisticated Such applications include ENG and EFP location conference and entertainment TV studio production theatre and live performance to name justa few A variety of options are also made available so that systems are established to suit different operational needs Compander System for Wide Dynamic Range and Low noise A compander compressor expander system is included for improved audio dynamic range low noise and inter ference The time constants for attack and release times are carefully chosen in the various transmitters to match the application ensuring minimised noise level while providing smooth and superior audio quality Multiple Information on Easy to read LCD and LED Most receivers and transmitters feature easy to read LCD panel and LED indicators which provide extensive information on the operating conditions Most receivers will display the RFinoutlevel audio outputstatus currentchannel number frequency and battery status of the transmitter Most transmitters do in essence have the same information available in the receivers such as audio input and RF output status current channel number frequency input attenuation setting and accumulated battery operating time Remote Battery Alarm on Receiver For added assurance of continued operation users can monitor the battery reserves of handheld body pac
Download Pdf Manuals
Related Search