Transcend Information 35 Ultra Computer Drive User Manual
Contents
1. This is to prevent accidental format of a different USB drive Type fdisk dev sda replace dev sda with your actual USB device Press p Press n Press w Type mkfs ext3 dev sda1 Go to etc fstab and add dev sda1 mnt usbdrive auto user noauto 0 0 Co IR a Type mkdir mnt usbdrive 10 Type mount mnt usbdrive 22 Troubleshooting If a problem occurs with your StoreJet 35 Ultra please first check the information listed below before taking your StoreJet 35 Ultra in for repair If you are unable to remedy a problem from the following hints please consult your dealer service center or local Transcend branch office We also have FAQ and Support services on our website at www transcendusa com E The Software CD does not auto run in Windows Go to the Device Manager in the Control Panel and enable the Auto Insert function of the CD ROM drive Alternatively you can manually run the StoreJet EXE file on the Software CD E My computer cannot detect the StoreJet 35 Ultra Please try the following 1 Make sure the power switch in the ON position and the cooling fan is spinning 2 Check if the Power Adapter is securely connected to the StoreJet 35 Ultra s DC PWR input and that its power cable is securely connected to the both the Power Adapter and your home s power outlet 3 Verify that you are using the USB or eSATA cable that came in the StoreJet 35 Ultra package Make sure your StoreJet 35 Ultra is s2. E I cannot detect the StoreJet 35 Ultra in Linux If you previously used your drive in a Windows 2000 XP Vista or Mac computer it is most likely formatted with NTFS which is not compatible with Linux Please follow the instructions on formatting the StoreJet 35 Ultra in Linux Remember that formatting the drive will erase all existing data on the drive E connected the StoreJet 35 Ultra to my computer with both eSATA and USB If you connect both eSATA and USB at the same time the StoreJet 35 Ultra will only be recognized on your computer as an eSATA device E cannot detect the StoreJet 35 Ultra in Windows 2000 XP Vista with eSATA Your motherboard chipset must support Advanced Host Controller Interface AHCI in order to use eSATA 23 Visit http www intel com support chipsets imst sb cs 012304 htm to see a list of AHCI compatible Intel chipsets and download the necessary chipset drivers for your operating system If you are still having problems please contact the manufacturer of your computer motherboard or eSATA add on card E StoreJet Format Utility cannot detect the StoreJet 35 Ultra using eSATA Ensure your Windows account has Administrator Privileges The StoreJet Format Utility only supports USB Please connect the StoreJet 35 Ultra via USB and click Refresh E Why can t use StoreJet 35 Ultra between different operating systems Windows Mac and Linux Different operating systems typically u
3. To Format hole Hard Disk 7 Capacity 149 05 GE File System INTFS f Quick Format volume Label Start Close Lick 10 Click the Close button to finish and exit E Mac OS 1 Plug the StoreJet 35 Ultra into an available USB port on your MAC computer 2 Unplug all other external storage devices from your computer This is to prevent accidental format of a different drive 3 Click the Initialize button You have inserted a disk containing no volumes that Mac 05 X can read To continue with the disk inserted click Ignore 4 Inthe Disk Utility window select the new drive from the list on the left 5 Select the Erase tab 6 Choose the Volume Format you want Mac OS Extended journaled is recommended 20 Disk Utility G 37 3 GE STI401104 First aid Erase Partition RAD Restore gt EEE intosh HD To erase a disk select disk or sol ne sele the appropriate format and name and E 143 1 GRSTILGOSI SA click the erase button a Erasing a disk results In all volumes of that disk being erased and ome large volume being created an that disk Erasing a volume result in a chan woluene being created a Erasing an optical desc CD RW DYD RA etc will result in a blank optecal disc No Tecra if apglied 16 a5 wased agitati Volume Formaf Mac OG Extended Qounnaled Mac OG Extended MS DOS File System UNIX File System Disk Description STS 16021 SAS Media Total Cap
4. or turn off the StoreJet 35 Ultra when its LED is flashing E Windows 2000 XP and VISTA USB Select the Removable Hardware icon on the system tray 2 The Safely Remove Hardware pop up window will appear Select the USB device drive letter that represents your StoreJet 35 Ultra he we 12 04 PM Removable Hardware tool in XP me Safely remove USB Mass Storage Dane Drive F gt AE ml FF 0451 Removable Hardware tool in Vista 3 A message window will appear stating The USB Mass Storage Device device can now be safely removed from the system Unplug the StoreJet 35 Ultra and turn off its power switch i Safe To Remove Hardware x The USB Mass Storage Device device can now be safely removed from the system e 12 04 PM Safe To Remove Hardware The USB Mass Storage Device device can now be safely removed from the computer x o GE 6 04 43 E Windows 2000 XP and VISTA eSATA If you are using an onboard eSATA AHCI controller a Removable Hardware icon may not appear By default Windows does not activate delayed write caching for eSATA devices which means it is safe to remove the StoreJet 35 Ultra from your computer as long as data is not being transferred To make sure write caching is disabled 1 In the computer browser right click the StoreJet drive and select Properties 2 Click the Hardware tab and double click the hard drive model that is installed insid
5. 35 Ultra will automatically appear in the My Computer window under Hard Disk Drives My Computer File Edit View Favorites Tools Help 3 P Search gt Folders F3 System Tasks 2 Viem system information TA Add or remove programs g Change a setting Hard Disk Drives Other Places Sw Local Disk C Se New volume D VE My Network Places Py Documents im Shared Documents E control Panel Note the drive name and letter in your My Computer window may differ If you installed a brand new hard drive into your StoreJet 35 Ultra please follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Windows 2000 XP system Windows Vista Connect the power cable to the Power Adapter and plug it into your home s power outlet Then connect the Power Adapter to the StoreJet 35 Ultra s round shaped DC power input jack Plug one end of the eSATA cable or the square shaped end of the USB cable into the StoreJet 35 Ultra Plug the other end of the eSATA or USB cable into an available eSATA or USB port on your desktop Turn on the StoreJet 35 Ultra s power switch Its LED will light up and the cooling fan will start When the StoreJet 35 Ultra is successfully connected to a computer Windows will automatically detect and install drivers for it Installing device driver software Click here for status ST3160815AS 9 Device driver software installed succe
6. Jet 35 Ultra s cooling fan When not using the Vertical Stand always lay the StoreJet 35 Ultra on a flat stable surface with the cooling fan side facing up Never set anything on top of the StoreJet 35 Ultra or cover the cooling fan inlet E Backing Up Data Transcend does NOT take any responsibility for data loss or damage during operation If you decide to store data on your StoreJet 35 Ultra we strongly advise that you regularly backup the data to a computer or other storage medium To ensure eSATA High Speed USB 2 0 data transfer rates when using your StoreJet 35 Ultra with a computer please check the computer has the relevant eSATA USB drivers If you are unsure on how to check this please consult your computer or motherboard User s Manual for eSATA or USB driver information E Power e The StoreJet 35 Ultra is powered from your home s power outlet using the included Power Adapter e Ensure nothing is resting on the power cables and that the cables are not located where they can be tripped over or stepped on E Reminders Always follow the procedures in the Disconnecting from a Computer section to remove your StoreJet 35 Ultra from a computer Product Overview Transcend OFF ON DC PWR pr S er AS A B C D E F G Case Screws 4 per side On Off Switch DC Power Input eSATA Port USB Port Cooling F
7. StoreJet 35 Ultra User s Manual Ver1 0 T Transcend Table of Contents Mode 3 Package Contents uri 3 FEALUres 1 4 System Requirements oa 5 Safety Precautions sai 5 Rec A E A E 5 ALU RE EE eee 5 We ACI NID EEE AA 5 Mi On 6 MON EE EN EN ii 6 Product NENNE ele 7 Installing a Hard EE ia 8 Connecting to a Computer iii 10 E Windows 2000 XP iii 10 Ek SNE 11 EO EEE 12 BEE lan 13 Disconnecting from a Computer iii 14 E Windows 2000 XP and VISTA USB 14 E Windows 2000 XP and VISTA eSATA 14 E Mac OS 9 0 or Later USB amp eSATA 16 E Linux Kernel 2 4 or Later USB knarr aena nn rnrn rnr nn arreen errara 16 Formatting the Hard Drive iii 17 E Windows 2000 XP iii 17 OTO LA 18 ELSE 20 BER e E E OO IOTLI re ee 22 Troubleshooting saneccsscsnavecaneseranssanewanarscasesenarseanesenavecaneseuanssanevanstscasesenarseanesenasecaneaesiecessere 23 SDEGIICAHONS nn 25 Ordering Information iii 25 Transcend Limited Warranty savne 26 Introduction Congratulations on purchasing Transcend s StoreJet 35 Ultra This advanced eSATA USB 2 0 external storage device is the perfect way to add an extra hard drive to your computer for downloading storing transferring and backing up your dat
8. a With both eSATA and USB 2 0 connection options the StoreJet 35 Ultra gives you the ultimate in flexibility The USB interface provides maximum compatibility with all types of notebooks and PCs while the new high speed eSATA interface gives you the maximum performance possible from your drive with transfer speeds up to 3000Kbps The StoreJet 35 Ultra also has silent 80mm fan that keeps your drive running cool and comes with useful backup software that can increase productivity Windows only please see the Software User s Guide for detailed instructions This User s Manual and the Software User s Guide can help you can get the most from your new device Please read both in detail before using the StoreJet 35 Ultra Package Contents The StoreJet 35 Ultra package includes the following items E StoreJet 35 Ultra E Software CD Pai N StoreJet glie N x Transcend wwwiranscendusacom E USB Cable E eSATA Cable E Power Adapter E Power Cable E Vertical Stand E Quick Installation Guide StoreJet Tr anscend E Mounting Screws x 4 OT Features Works with all 3 5 SATA hard drives Two connection options eSATA or USB2 0 eSATA for maximum performance up to 3000Mb s USB2 0 interface assures universal compatibility Silent 80mm cooling fan reduces risk of HDD failure External power adapter and eSATA cable included Includes StoreJet elite backup software Hot swappable Plug an
9. acity 145 1 GB 160 041 885 696 Bytes Conmection Bus USE Write Stante Read Nirice Connection Type External Connection ID 7 Inputa name for your new drive otherwise your drive will be named Untitled 8 Click the Erase button in the bottom right corner of the window ae Disk Utility griassone First Aid Eme Fartizion RAID Restore MM Macintosh HD To erode dijk vedetta dak Ge wales select er appropriate format and same and click F erage human Ed Unenied Erasing a disk results in all volumes of that disk being erased and one large volume being cheated on tat dak a Eranarig voburne revelts in clean vole being treated Eras on optical dri CD RW DVD BE em will result in blank optical dis Ha far mad ji applied so am erated optical dae Volume Format Mac 05 Extended journaled Ha CI Disk Gescription STILGGRI 145 Mida Teal Capacity 149 1 CE 160 04 425 60 Bawa Conreribon Bus 058 Virke Status Bead Wrine Connaciios Type Cstrrnal Cen meter es ID 9 Click Disk Utility i Erase Disk 7 Erasing a disk will destroy all information on the T volume of the disk L 3 This disk has 1 volume Untitled L Are you sure you wish to erase the disk Untitled 21 10 Click the Close button to finish and exit E Linux 1 Plug the StoreJet 35 Ultra into an available USB port on your Linux computer N Unplug all other USB storage devices from your computer
10. ame on your desktop may differ If you installed a brand new hard drive or a hard drive that was previously used with Windows 2000 XP or Vista into the StoreJet 35 Ultra an Initialize message will appear Follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Mac system 12 aro N You have inserted a disk containing no volumes that Mac O5 X can read To continue with the disk inserted click Ignore Linux Connect the power cable to the Power Adapter and plug it into your home s power outlet Then connect the Power Adapter to the StoreJet 35 Ultra s round shaped DC power input jack Plug the square shaped end of the USB cable into the StoreJet 35 Ultra Plug the other end of the USB cable into an available USB port on your desktop Turn on the StoreJet 35 Ultra s power switch Its LED will light up and the cooling fan will start If you installed a brand new hard drive or a hard drive that was previously used with a Windows or Mac computer please follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Linux system Create a directory for the StoreJet 35 Ultra Example mkdir mnt Storejet Then mount the StoreJet 35 Ultra Example mount a t msdos dev sda1 mnt Storejet 13 Disconnecting from a Computer WARNING To prevent data loss ALWAYS follow these removal procedures NEVER disconnect
11. an LED Indicator Light Installing a Hard Drive A The StoreJet 35 Ultra hard drive enclosure only works with 3 5 SATA Hard Disk Drives E Installing a Hard Drive If you purchased a Transcend StoreJet 35 Ultra hard drive enclosure that does not have a SATA hard disk drive already installed please read this section for installation instructions If a hard drive is already installed you can skip to the Connecting to a Computer section 1 Remove all eight screws from the back and front of the StoreJet 35 Ultra then remove both the front and back metal covers 2 Place 3 5 SATA hard drive face up into the enclosure so that it lays flat with its SATA connectors facing the StoreJet 35 Ultra s circuit board Assure that the SATA connectors on the hard drive and the circuit board are aligned properly 3 Connect the hard drive to the StoreJet 35 Ultra by gently sliding it towards the circuit board s SATA connectors Do NOT connect the hard drive at an angle which may damage it 4 Carefully turn the StoreJet 35Ultra on its side making sure the hard drive does not fall out Secure the hard drive with the provided mounting screws 5 Reattach the front cover and back cover and replace the eight case screws Connecting to a Computer The StoreJet 35 Ultra can be connected to your computer in two ways USB 2 0 or eSATA To get the best performance results from your hard drive we strongly recommend using t
12. d Play Stylish aluminum housing Anti slip vertical stand LED indicator light System Requirements E Desktop computer with a working eSATA or USB port E One of the following operating systems Windows 2000 Windows XP Windows VISTA Mac OS 9 0 or later USB only Mac OS 10 4 or later eSATA Linux Kernel 2 4 or later USB only Safety Precautions These usage and safety guidelines are IMPORTANT Please follow them carefully E General Use Unpack the contents of the StoreJet 35 Ultra package carefully Avoid exposing your StoreJet 35 Ultra to extreme temperatures above 55 C or below 5 C during operation Never drop your StoreJet 35 Ultra Never allow your StoreJet 35 Ultra to come in contact with water or any other liquids Never use a damp wet cloth to wipe or clean the exterior case Do not use or store your StoreJet 35 Ultra in any of the listed environments o Direct sunlight o Next to an air conditioner electric heater or other heat sources o In a closed car that is in direct sunlight E Setup Please ensure that you connect the USB cable to the StoreJet 35 Ultra and your computer correctly square end gt StoreJet 35 Ultra rectangular end gt PC or Notebook The supplied eSATA cable only works in eSATA ports and will not connect directly to your PC s internal motherboard SATA connector When using the Vertical Stand allow at least 2 clearance between your PC wall etc and the Store
13. e your StoreJet 35 3 If using Vista you may have to first click Change Settings 14 Disk drive Device type Disk drives Manufacturer Standard disk drives Location 0 Device status This device is working properly Cha nge settings 4 New Volume E Properties General Hardware Sharing Quota All disk drives ke my Mame TS General Policies Volumes Driver Sad ST 38081 TAS White caching and Safe Removal Optimize for quick removal vat can disconnect this device without using the Sate Removal EON This setting disables write caching on the disk and in Windows sa Device Propertie Optimize for pertormance Manufacturer 5 This setting enables wrote caching in Windows to Improve i performance To disconnectthis device from the computer click the Safely Remove Hardware icon in the taskbar hotification area Location 1 Device Status T _ Enable write caching on the disk This setting enables write caching to improve disk performance but a power outage or equipment failure might result in data loss or corruption 15 E Mac OS USB amp eSATA Drag and drop the Disk icon that represents your StoreJet 35 Ultra into the trashcan Then unplug your StoreJet 35 Ultra from the USB port and turn off its power switch New Volume E Linux Kernel 2 4 or Later USB Execute umount mnt Storejet to un mount the device Then unplug your StoreJet 35 Ultra
14. ecurely connected to the USB or eSATA port If it is try unplugging it and plugging it back in again You can also try using a different USB or eSATA port 5 Turn the StoreJet 35 Ultra s power switch off wait for 10 seconds and then turn it back on again Ensure the USB port or eSATA port on your computer is enabled and functioning properly If disabled please refer to the user s manual of your computer motherboard or eSATA interface card If you still cannot detect the StoreJet please see below for help with specific operating systems E The StoreJet 35 Ultra does not Power ON The StoreJet 35 Ultra must be powered from the mains using the power adapter and the power switch turned on If you cannot power on the StoreJet35 Ultra and you have ensured that all the cables are connected properly and the power switch is on try plugging the power cable into another power outlet E I cannot detect the StoreJet 35 on my Mac If you previously used your drive in Windows 2000 XP or Vista it is most likely formatted with NTFS which is not compatible with Mac OS To store and backup data on your Mac please follow the instructions on formatting the StoreJet 35 Ultra on a Mac to convert the drive to Mac s HFS format If you plan to regularly use the drive with both Windows and Mac computers we recommend formatting the drive to the FAT32 file system Keep in mind that formatting the drive will erase all existing data on the drive
15. from the USB port and turn off its power switch 16 Formatting the Hard Drive WARNING Formatting the disk will erase all of the data on your StoreJet 35 Ultra AN Please use the USB interface not eSATA to format the drive You must have Administrator Rights in order to format in Windows 2000 XP or Vista E Windows 2000 XP 1 Plug the StoreJet 35 Ultra into an available USB port on a Windows 2000 XP computer Unplug all other USB storage devices from your computer This is to prevent accidental format of a different USB drive Insert the included Software CD into your computer s CD ROM drive N Open StoreJetFormatter exe in the Software folder of the Software CD The program will automatically detect the StoreJet 35 Ultra drive Press Start oS OF i Transcend StoreJet Format Utility Y1 0 Sel USB Device E i USB gt gt OC YDIT600AA4S 650FPSAO Drive To Format whole Hard Disk Capacity 1 49 05 GE File System NTFS im Guck Format Yolume Label Start Close 7 The format process may take a few minutes When complete an O K message will appear in the bottom right hand corner of the window 17 Transcend StoreJet Format Utility Y1 0 Sele Drive To Format Whole Hard Disk Capacity 149 05 GE File System NTFS fr QuickFormat volume Label E Windows Vista Plug the StoreJet 35 Ultra into an available USB port on your Windows Vis
16. he eSATA interface If your computer does not have an eSATA port you may need to purchase an SATA to eSATA adapter bracket often included in PC motherboard packaging or a PCI PCI X PCI Express eSATA card to connect your StoreJet 35 Ultra using eSATA Otherwise you can simply connect the StoreJet 35 Ultra via USB eS N USB Port E Power Outlet E Power Adapter Connecting to Notebook or PC using USB Power Outlet eSATA Port E Power Adapter Desktop Connecting to a PC using eSATA Windows 2000 XP Connect the power cable to the Power Adapter and plug it into your home s power outlet Then connect the Power Adapter to the StoreJet 35 Ultra s round shaped DC power input jack Plug one end of the eSATA cable or the square shaped end of the USB cable into the StoreJet 35 Ultra Plug the other end of the eSATA or USB cable into an available eSATA or USB port on your PC Turn on the StoreJet 35 Ultra s power switch Its LED will light up and the cooling fan will start When the StoreJet 35 Ultra is successfully connected to a computer Windows will automatically detect and install drivers for it di Found New Hardware Disk drive be 6 55 PM 10 6 So a N 6 If you installed an existing hard drive into the StoreJet 35 Ultra that was previously used with a Windows 2000 XP Vista computer a new Local Disk with a newly assigned drive letter representing the StoreJet
17. se different file system formats to offer improved performance or more advanced storage features If you plan to use your StoreJet 35 Ultra on different kinds of computers we recommend that you format the drive to the FAT 32 file system for maximum compatibility between operating systems 24 Specifications Size Lx Wx H 193 00mm x 127 00mm x 48 00mm Weight 325g without hard drive Storage Media 3 5 SATA Hard Disk Drive not included AC input 100V 240V Power Supply DC input 12V 5V via Switching Power Adapter eSATA 3 0Gbits per second Max Transfer Speed USB 2 0 480Mbits per second Operating Temperature 5 C 41 F to 55 C 131 F Storage Temperature 40 C 40 F to 70 C 158 F Certificates CE FCC ClassB BSMI Warranty 2 years Ordering Information Device Description Capacity Transcend P N StoreJet 35 Ultra OGB TS0GSJ35U StoreJet 35 Ultra OGB TSOGSJ35U EU StoreJet 35 Ultra 500GB TS500GSJ35U StoreJet 35 Ultra 500GB TS500GSJ35U EU 25 Transcend Limited Warranty Above and Beyond is the standard we set ourselves for customer service at Transcend We consistently position ourselves to be significantly above the industry norm which is all part of our commitment to Customer Satisfaction All Transcend information Inc Transcend products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications During the warranty period
18. should your Transcend StoreJet 35 Ultra fail under normal use in the recommended environment due to improper workmanship or materials Transcend will repair the product or replace it with a comparable one This warranty is subject to the conditions and limitations set forth herein Duration of Warranty The Transcend StoreJet 35 Ultra is covered by this warranty for a period of two 2 vears from the date of purchase Proof of purchase including the date of purchase is required to collect on the warranty Transcend will inspect the product and decide whether to repair or replace it Transcend reserves the right to provide a functional equivalent product or a refurbished replacement product Limitations This warranty does not apply to product failure caused by accidents abuse mishandling improper installation alteration acts of nature improper usage or problems with electrical power In addition opening or tampering with the product casing or any physical damage abuse or alteration to the product s surface including all warranty or quality stickers product serial or electronic numbers will also void the product warranty This warranty only applies to the product itself and excludes all product accessories including but not limited to card adapters cables earphones power adapters and remote controls which must be exchanged within seven days of the purchase date if defective Transcend is not responsible for recovering any data lost d
19. ssfully J E EM FF 05 46 If you installed an existing hard drive into the StoreJet 35 Ultra that was previously used with a Windows computer an AutoPlay window will appear allowing you to browse the contents of the drive 11 ae o DN 6 __ Local Disk G ca General options Open folder to view files i using Windows Explorer SOP T PRE ce ees Note the drive name and letter in your AutoPlay window may differ If you installed a brand new hard drive into your StoreJet 35 Ultra please follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Vista system Mac OS Connect the power cable to the Power Adapter and plug it into your home s power outlet Then connect the Power Adapter to the StoreJet 35 Ultra s round shaped DC power input jack Plug one end of the eSATA cable or the square shaped end of the USB cable into the StoreJet 35 Ultra Plug the other end of the eSATA or USB cable into an available eSATA or USB port on your desktop Turn on the StoreJet 35 Ultra s power switch Its LED will light up and the cooling fan will start If you installed an existing hard drive into the StoreJet 35 Ultra that was previously used with a Mac computer your drive will automatically appear on the desktop 4 Mon6 38PM Central X Play Ground a New Volume Note New Volume is an example drive The drive n
20. ta computer 2 Unplug all other USB storage devices from your computer This is to prevent accidental format of a different USB drive 3 Insert the included Software CD into your computer s CD ROM drive Open the Software folder of the Software CD 5 Right click StoreJetFormatter exe and select Run as Administrator Run as administrator Share l WinZip Li Pin to Start Menu Add to Quick Launch Restore previous versions send To Cut Copy Create Shortcut Delete Rename Properties 6 The User Account Control window will appear Select Allow to continue 18 9 TU TW KRT rire rei Woo HEGE ount Contr Don t run the program unless you know where it s from or you ve used it before E StoreletFormatter exe Sarit Unidentified Publisher Cancel I don t know where this program is from or what it s for Details User Account Control helps stop unauthorized changes to your computer The program will automatically detect the StoreJet 35 Ultra drive Press Start USB Device USB gt gt WDCMWDTbIDAAJ amp S BIPSAL Drive To Format Whole Hard Disk 7 Capacity i 4905 GE File System NTFS Quick Format volume Label The format process may take a few minutes When complete an O K message will appear in the bottom right hand corner of the window 19 Transcend StoreJet Format Utility Y1 0 a m Ed Refresh Drive
21. ue to the failure of a hard drive device Transcend s StoreJet 35 Ultra must be used with devices that conform to the recommended industry standards Transcend will not be liable for damages resulting from a third party device that causes the Transcend StoreJet 35 Ultra to fail Transcend shall in no event be liable for any consequential indirect or incidental damages lost profits lost business investments lost goodwill or interference with business relationships as a result of lost data Transcend is also not responsible for damage or failure of any third party equipment even if Transcend has been advised of the possibility Disclaimer The foregoing limited warranty is exclusive There are no other warranties including any implied warranty of merchantability or fitness for a particular purpose This warranty is not affected in any part by Transcend providing technical support or advice Online Registration To expedite the warranty service please register your Transcend Product within 30 days of purchase Register online at http www transcendusa com productregister The specifications mentioned above are subject to change without notice Transcend Information Inc T Transcend The Transcend logo is a registered trademark of Transcend Information Inc www transcendusa com All logos and marks are trademarks of their respective companies 26
Download Pdf Manuals
Related Search