Home

Humax HDCI-2000 Satellite TV System User Manual

1. Physical Specification Size 370mm x 60mmx262mm W x H x D Weight Net 2 5kg Operating Temperature 0 C to 45 C Storage Temperature 10 C to 70 GG GB 81 15 Glossary DiSEqC Digital Satellite Equipment Control A DiSEqC compatible product relies on a switching box which detects the 22kHz tone pulsing rapidly on and off In this way a specially designed product can control numerous LNBs through a DiSEqC switching box EPG Electronic Programme Guide An electronic equivalent to a printed television listings magazine it is an application used with digital receivers and digital television sets to list current and scheduled programs that are or will be available on each channel including a short summary or commentary for each program The information supplied in the EPG is sent and updated by the channel broadcaster FEC Forward Error Correction A technique for error control of data transmission Frequency The property of a signal measured in cycles per second Hz FTA Free To Air An unscrambled broadcaster allowing customers to view channels or services without paying any subscription HDMI High Definition Multimedia Interface An all digital audio video interface that supports standard enhanced or high definition video plus multi channel digital audio on a single cable It transmits all ATSC HDTV standards and supports 8 channel digital audio Hi Fi High Fidelity
2. button 3 3 Favourite 2 ENS Favourite 3 4 Selecting Unselecting All Channels 1 Press the YELLOW O button on the remote control to select all chamnels 5 Edit Favourite List 2 To release one or more channels from select all press the OK Todo D rup Select Al button while the cursor is on the selected channel j j3 PREMIERE 3 1204 PREMIERE 4 Note Up to 100 channels can be saved in favourite group 205 PREMIERE 5 J6 PREMIERE 6 GB 53 9 Edit Channels 5 Adding Removing Channels You can add a channel to the favourite group or remove a channel from the list 1 Select the channels you want to add to the favourite channel list using the a button 2 Press the BLUE _ button on the remote control to add the channels to the favourite list you have chosen 3 To remove channels from the favourite list select the channels 1 o 0101 from the list and press the BLUE _ button on the remote say All ere control 0103 PREMIERE 3 Note When the cursor is on the left column the blue button is marked Add when the cursor moves to the right column it becomes Remove GB 54 10 Installation In this chapter you can configure installation settings such as search channels advanced search SMATV search software update and default setting Note Press the BACK 5 button to save the changes and return to the previous menu Press the MENU button to exit the menu scree
3. 1 STANDBY BUTTON Switches between operation and standby modes 2 TV RADIO BUTTON Switches between TV and radio modes 3 P P BUTTON Moves the TV radio channel up or down 4 VOL VOL BUTTON Adjusts the audio volume 5 VIDEO FORMAT Changes the resolution of video 6 CI MODULE SLOT A slot for two Cl modules GB 8 1 3 Conditional Access Although some TV and radio channels are free to air most TV and radio music channels are available on a subscription basis and can only be enjoyed via a Conditional Access component 1 Inserting a Cl with Smartcard A Cl module looks like a PC map PCMCIA for laptops There are different kinds of Cl Modules suitable for different coding systems Irdeto Conax and more Additionally to the Cl module a Smartcard is needed to decode the channels 1 Open the right hand flap on the front of the product 2 Follow the instructions of the module and insert the Smartcard into the Cl module 3 4 Insert the Cl module into the slot Keep the Cl module with the Smartcard horizontal i lt Smartcard GB 9 1 Before Using the Product 1 4 Rear Panel 1 LNB IN Connects a satellite antenna cable 2 LNB OUT Connects to another digital satellite receiver 3 TV SCART Connects to the TV set using a TV SCART cable 4 VCR SCART Connects to the VCR DVD using a VCR SCART cable 5 AUDIO L R Connects to the TV or VCR and outputs audio signals 6 VIDEO Con
4. Note Enter the frequency from 950 to 2150 MHz y SO gt End Frequency pet Symbol Rate 1 Symbol Rate 2 Symbol Rate 3 Symbol Rate 4 Symbol Rate 1 Select Symbol Rate using the a button 2 Select one option among 27500 26000 and 22000 using the OK y or p button If the required value does not exist select User Define and enter the symbol rate directly Note You can enter up to four symbol rates Select Search and press the OK button GB 69 10 Installation 2 SMATV Manual Search Frequency 1 Select Frequency using the a button and press the OK button 2 Enter the frequency using the NUMERIC 0 9 buttons SMATV Search Frequency Note Enter the frequency from 950 to 2150 MHz E Symbol Rate Symbol Rate 1 Select Symbol Rate using the a er button 2 Select one option among 27500 26000 and 22000 using the OK y or p button If the required value does not exist select User Define and enter the symbol rate directly FEC 1 Select FEC using the a button 2 Select one option among Auto 1 2 2 3 3 4 5 6 and 7 8 using the OK 5 or fp button GB 70 10 4 Software Update Software Update allows you to update the system software 1 Press the MENU button 2 Select Installation using the a button and press the OK P installation button 3 Select Software Update using the a button and press the ad OK button Ag SMATV Search Def
5. The characteristics of audio devices that can play back all the audio frequencies a person can detect which is the range of 16Hz and 20KHz Sometimes it is used to indicate good quality of audio devices such as stereo tape products LNB Low Noise Block A device that is mounted on an arm facing your satellite dish focusing on satellite signals A LNB converts signals received from satellite to a lower frequency and sends them to a satellite product via coaxial cable OSD On Screen Display OSD displays the basic information necessary for the users to configure monitor or TV settings OSD information may include brightness contrast tuning RGB adjustment and screen size and position OTA Over The Air A standard for the transmission of software for equipment through a broadcast system Manufacturers reserve the right for deciding the release of the software for their products GB 82 Polarization The direction of the electrical and magnetic fields of a signal Satellites use both vertical and horizontal polarisation Means that a frequency can be used twice PID Packet Identifier A set of numbers identifying stream packets contained within a single data stream QPSK Quaternary Phase Shift Keying Digital modulation technique in which the carrier phase can have one of four possible values SCART A 21 pin connector standard to connect two pieces of Audio Visual equipment such as a TV and a VCR Each device will h
6. button on the remote control to display the group of channel lists lil Edit Channels 2 Select the group you want using the button and press the OK button Radio HOTBIRD fee e cfeleoe 5 Select Unselect All Channels 1 Press the YELLOW O button on the remote control to select all channels ill Edit Channels 2 To release one or more channels from select all press the OK ro Oar button while the cursor is on the selected channel 0201 PREMIERE 1 02 PREMIERE 2 03 PREMIERE 3 0204 PREMIERE 4 5 PREMIERE 5 0206 PREMIERE 6 07 PREMIERE 7 8 PREMIERE START Note Up to 100 channels can be saved in Favourite group al nm Ea m a fa Aa 6 Deleting Channels 1 Select the channels you want to delete and press the BLUE _ button on the remote control You can select more than one channel 2 The chosen channel s will be deleted GB 51 9 Edit Channels 9 2 Edit Favourite List You can rename favourite groups move favourite channels select favourite groups select unselect all channels add or remove channels from the favourite channel list l 2 1 Renaming Favourite Groups Press the MENU i button Select Edit Channels using the button and press the OK Edit Channels button Edit Channels Select Edit Favourite List using the button and press the Edit Favourite List OK button You can rename your favourite group 1
7. e Do not use the product when it is out of order If you continue to use the product when defective serious damage can be caused to it Make sure to contact your local product distributor if the product is out of order e Do not insert metal or alien substance into the slots for the modules or Smartcards It may cause damage to the product and reduce its life span GB 4 Contents 1 Betore Using the Product s 0 35 6 cess a dd 7 Package C Omens us nido ducts Gana hinds axe utes beeen eons boda eeu ts 7 liz FrON ERAMOS A A A a Raed A aia 8 1 3 Conditional Access 9 FARO e A es a tae attic teat aaa Boe ata E E EE fe NE ER 10 TO Remote CONTO yt cosida en Ree ee aes Leen ee Aa A AAA ES 11 O O eee ae ee ee et 13 2T Using HDMI COMmmecion 2 028 asentar bitrate dede ams uss 13 2 2 SING DN COMEC O as aan ees eto ene Bas Seinen was BS a eats 14 2 3 Using Component Cable 0 ee en ene tee nee ee nnes 16 ZA Using SCART Cables sauce aaa etek rd erie sae Sewn ad ark ees 17 DINO WE ANA a st A E E AA A E EEEE 18 3 Installation Wizard soni SA e ASR 19 o 1 LAanQuadewd cctnndens r Aae atone ies sh eteh et indhancatensivehs etek de mae ake 19 2 2 SeacM Channeli sarea a ty aera nak ein maine as IO O eS we ana eo ee 19 A Ree ee E ee ee 21 SA SOMWane U POA srr ear ced er ete a eRe a edhe ack dl ie te esa a A AW ah wks 21 4 Basic ODO it west ere eee eke A Laat eke AEAN 22 AA Switching Channel 25 ssc Soke ha et en am wee ae Sew ae eee aa ee
8. Step and Time and press the OK or button Motor Setting 3 When motor driving is set as Step or Time a pop up will ie appear to set the driving size Select the driving size using VS the 4 p button Select Save and press the OK button lt Co Continuous Motor moves continuously ay Step Motor moves by specified unit P eG Quality Time Motor moves during specified time GB 60 Go to Stored Position Move the antenna to the position of the selected satellite 1 Select Go to Stored Position using the a fr button and press the OK button 2 Wait till the antenna moves to the position of the satellite 3 Confirm signal strength and quality level and fine tune the antenna direction Select Go to Stored Position using the a e button Move the antenna East West by pressing the button Adjust Signal Level to maximum Store Current Position Save the adjusted position of the satellite 1 Select Store Current Position using the a fr button and press the OK button 2 The position of the antenna headed for the certain satellite will be saved Note You can set the antenna position by repeating the procedure above Recalculate You can recalculate the position of all satellites based on one satellite Adjust the antenna position of a certain satellite 1 Select Recalculate using the a button and press the OK button 2 To readjust all positions select Yes and press the OK button N
9. e The slots on top of the product must be left uncovered to allow proper airflow into the unit e Do not stand the product on soft furnishings or carpets e Do not stack electronic equipments on top of the product ATTACHMENTS e Do not use any unsupported attachments as these may be hazardous or cause damage to the product CONNECTION TO THE SATELLITE DISH LNB e Disconnect the product from the mains before connecting or disconnecting the cable from the satellite dish Failure to do so can damage the LNB CONNECTION TO THE TV e Disconnect the product from the mains before connecting or disconnecting the cable from the TV Failure to do so can damage the TV EARTHING e The LNB cable must be earthed to the system earth for the satellite dish GB 3 Safety and Warning 10 LOCATION e Place the product indoors to avoid exposing it to lightning rain or sun e Do not place it near a radiator or heat register e Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic influences such as a TV ora VCR e Do not block the openings with any object and do not place the product on a bed sofa rug or other similar surface e If you place the product on a rack or a bookcase ensure that there is adequate ventilation and that you have followed the manufacturer s instructions for mounting e Do not place the product on an unstable cart stand tripod bracket or table where it can fall e A falling pr
10. Humax website to check the latest news and newly released software versions http www humaxdigital com It is recommended that you periodically check for the availability of software update 11 1 OTA Over the Air OTA an abbreviation of Over the Air is a standard for the transmission of software for equipment through a broadcast system OTA is simply an alternative method for downloading software versions However the manufacturers reserve the right for deciding the release of the software for their products by beaming the latest software versions over the air via satellite Note that OTA is only limited to certain geographical regions mainly due to different antennas having different footprints area where the signal can be received The software update via satellite system will only occur under the following circumstances 1 The equipment should have appropriate loader software Caution Please note that if normal loader software is not equipped the product may not be updated or operate properly after software update 2 The manufacturer decides to release the software via a designated antenna system 3 The equipment must be tuned properly to the same antenna equivalent to that of the manufacturer 4 Update software when the signal strength quality is high If the weather is not favorable and the signal strength quality is not recommendable perform the software update later Caution e Please be careful to keep the power on a
11. Press the GREEN _ button and select the favourite group to rename Press the OK button ss Edit Favourite List Press the RED 7 button and select Rename Group and then todo GQ roup OSeletal press the OK button E Keyboard will appear Enter the name of the favourite group cg using the keyboard 0103 PREMIERE 3 Select Save and press the OK button to complete al Move Rename Group becomes activated only when the cursor is placed on the right column For detailed information on using the keyboard refer to 6 1 2 Renaming Channels GB 52 2 Moving Favourite Channels You can move the favourite channels to a different location within the favourite channel list This function changes the location only and does not affect the number of the channel 1 Select the favourite channels to move within the favourite channel list and press the RED _ button on the remote control Edit Favourite Lis 2 Select Move and press the OK button Todo Rename Group Group O A 3 Move the cursor to the destination using the a button and i press the OK button a 0102 PREMIERE 2 4 The selected channel is moved to the new location 0103 PREMIERE 3 3 Selecting Favourite Groups 1 Press the GREEN _ button on the remote control to display the group of favourite channels 2 Select the favourite group you want using the a fr button and press the OK
12. ae RS 22 A 2 Nolu ume Control isecen rr ducct sean ate seo etek Och ete tee 22 AO Lip O VNC ws aida AAA EI RITA Gye eae EOS 22 4 4 Resolution ico asno as we ees ae a bo a ae Bt age BOA a Re Aes a Oe ae 23 AO OOUOMT EIS bigest at E ois ea Pe NE coke he os ES aR Be wee Ae ach wee 23 4 6 Programme Information i plate 0 0 tenet eens 25 5 Channel List 5 5 is A wae dienes eds wie ae eee dats as aia wee 27 5 VAI C hannel LISt shox 4m oa wttso ata Phot eens waited on Otome da inn 27 AS OS A O eee ee eee ee eee eee 30 5S SAle ING lbs is aa at Uist ots Sete am eae kets ia Sean ata es aoe ee date ias 31 D4 Seramble iS oda eee 31 Gi oo tres can a a e tc ea iaa eat 2am dais ea A i 32 O TEPS Mal A AA AA a eee RoReEss 32 AA E O AAA A O O 34 6 3 Schedule St o a e a O pause Mord dd e Sg Ae 34 6 4 Find ProGgramMinie 40 56 Sd A aes ohh 35 Ts SY SAMA hee area eee ees See oe ec Ra ace See ee cee we eee eS 38 PG IONS uva ostias a ine cies thn ect ote on eect etn eames ati wknd ae Hin oro anta ae 38 PZ SY STO OlalUS ada Cows eee A O ERES 38 A ICC noc eee eter Suerte OE eet or BO ee Os a DOS RO ee ees 39 ADONDE a eee tae ear AA ae ween eee eee etna eee eee a eee eee 40 7 0 SlanuUp Chlalinlel a oY atten ete sees E E Se ads Gudea ain motes aes 41 8 SENO cist mete ase eed oath aca ee a ee ates Sate ee oe Memeo ere eas 42 0 Parental Control sete one cos ttnet ote feces etn eae fine einen en a a EEE A E tinea 42 9 2 Language Sel airada tarada o a Eo
13. antenna in an obstacle free place Make sure there is no mobile phone or microwave oven near the product Keep the power and the antenna cable for the satellite apart from each other Check the signal levels and adjust your antenna if the level is too low The signal level may be effected by weather conditions Note Ifthe antenna is covered with snow or the RF is weakened by heavy rain the condition of the sound and picture may temporarily be poor However the poor sound and picture quality due to weather conditions cannot be accepted as a malfunction of product Check that your dish alignment is correct Change the satellite dish for a larger one as this will increase the signal levels received Replace the LNB with a lower noise factor in cases where the noise factor is too high Replace the LNB with a new one in case it is damaged or out of order GB 77 13 Trouble Shooting 4 No or poor sound Check that your AV cable is connected correctly Check the volume levels of your TV set and the product Check if the product or TV is on mute Check audio type or soundtrack option in the AV menu 5 Remote control does not operate To control the product the top end of the remote control should point directly towards the receiving part of the product Remove and reinsert the batteries in the remote control Replace the batteries in the remote control for a new set 6 Cannot make reservations Check that no
14. chapter you can set parental control language setting time setting A V setting and other configuration items to keep limitations where you want them for the viewers Note Press the BACK 5 button to save the changes and return to the previous menu Press the MENU button to exit the menu screen 8 1 Parental Control Parental Control allows you to set rating limits for each programme according to the age of the viewer or change your previous password You can also lock the changes you have made by operating installation lock 1 Press the MENU 5 button 2 Select Setting using the fr button and press the OK a gt Setting button MS 3 Select Parental Control using the a fr button and press the m anane Setting OK button RAG iii 4 You will be prompted to enter a password Enter the password eee S using the NUMERIC 0 9 buttons Note The default password is 0000 1 Censorship Classification Censorship Classification enables you to place certain restrictions on the viewers by setting age limits and require a password to view the blocked programmes 1 Select the Censorship Classification using the ua fr button 2 Select the Age Level you wish to set using the OK i or fp button Parental Control Censorship Classificatie WAN 7 View All All programmes can be watched because there is no age limitation BS 15 7 Programmes are blocked for those under the age 7
15. previous reservations are conflicting with the new reservation Check that the product is switched on at the time of the reservation 7 No password information is given The default password is always 0000 8 Channel search does not work Make sure that the antenna setting in the menu is correct 9 Cannot update new software You can get an update If the product does not show a message requesting update that means no software is available 10 Cannot watch scrambled channels Check that you have the appropriate Smartcard and Cl Module Reinsert the Smartcard and Cl Module and make sure it initializes correctly Check in the menu that the product is detecting the Smartcard and Cl Module Check in the menu that you have a valid and working subscription to the channels you wish to view Ensure that the Smartcard or Cl Module is not damaged 11 Cannot watch pay channels Check in the menu that you have a valid and working subscription to the channels you wish to view Contact your network operator for more information GB 78 13 2 Error Message Error message Possible causes What to do No or bad signal The channel is scrambled or not The satellite dish is not pointing at the satellite Signal is too weak Satellite dish is too small Problem with LNB Wrong antenna setting The channel has a signal but no audio or video is provided Adjust dish alignment Increas
16. the page 21 V FORMAT Change the resolution of video 2 Setup This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality The product provides various interfaces to connect to the TV VCR or other devices Select the most appropriate procedure depending on the equipment you have Note If you encounter any problems setting up your product please contact your local product distributor 2 1 Using HDMI Connector The HDMI connection is recommended for Digital TV In case the TV has a HDMI input connector a special all digital interface that provides the highest picture quality connect the product to the TV with the HDMI cable as follows AAA AID APIO AiR PE GB 13 2 Setup 2 2 Using DVI Connector The DVI connection using a HDMI to DVI converter is recommended for Digital TV In case the TV has a DVI input connector connect the product to the TV with the HDMI cable using a HDMI to DVI converter as follows 1 When equipped with an A V receiver UL Poles os LAA AO LP piiat 03014407 659 0414 12 Em KEMA Mi i im DOAN ore it GB 14 2 When there is no A V receiver available In case you are not equipped with an A V receiver connect the product to the TV using the audio cable as follows A EO ATEN dE ul a i ETEN creed ANAL Y Cable 1Stereo 2ACA Note You can also connect the product to the audio input jack of
17. the symbol rate from 10 to 30 Ms s in DVB S2 Transmission and QPSK Modulation setting 4 Enter the symbol rate from 10 to 31 Ms s in DVB S2 Transmission and 8PSK Modulation setting Transmission 1 Select Transmission using the a button 2 Select one option form DVB S and DVB S2 using the OK or 4 p button FEC 1 Select FEC using the a button 2 Select one option among Auto 1 2 2 3 3 4 5 6 and 7 8 using the OK y or fp button in DVB S Transmission setting 3 Select one option among Auto 1 2 2 3 3 4 3 5 4 5 5 6 8 9 and 9 10 using the OK yy or lt gt button in DVB S2 Transmission and QPSK Modulation setting 4 Select one option among Auto 3 5 2 3 3 4 5 6 8 9 and 9 10 using the OK y or fp button in DVB S2 Transmission and 8PSK Modulation setting Modulation 1 Select Modulation using the a button 2 Select one option form QPSK and 8PSK using the OK or p gt button Note When Transmission is set to DVB S Modulation is disabled The values for Symbol Rate and FEC differ depending on the value of Modulation Refer to the table below Parameter Value DVB S DVB S2 Modulation Disabled QPSK BPSK Symbol Rate 2 45 Ms s 10 30 Ms s 10 31 Ms s Auto 1 2 2 3 3 4 Auto 3 5 2 3 3 4 Auto 1 2 2 3 3 4 5 6 7 8 3 5 4 5 5 6 8 9 5 6 8 9 9 10 9 10 GB 64 4 Network Search 1 Select Network Search using the a fe button 2 Select Enable Disable using th
18. view teletext You can select the language for the subtitle if the programme provides subtitle information 1 Press the OPT corr button 2 Select Subtitle using the a button and press the gt button 3 Select the required subtitle language using the a button and press the OK button The subtitle will be displayed in the SBE Finnish selected language at the bottom of the screen spanat 4 Select Off from the subtitle language list to hide subtitle from the screen GB 24 4 6 Programme Information i plate Programme information is always displayed for a certain period of time whenever you switch channels You can view the programme information by pressing the i button while watching a programme Press the BACK button to hide the plate 1 General Information The general information is displayed on the screen as the following 4 B D Ga eee 22 30 14 30 CM l Eagles Farewell Tour The neces and Roll Hall of Famers take their show on Ee road 1 Channel number and name 2 Icons ll Displayed only when the channel is a scrambled channel Displayed only when the channel provides HD programmes Displays the resolution of the current programme Displayed only when subtitle information is available Displayed only when there is any teletext information O Displayed only when the programme is broadcast in Dolby Digital Displayed only if this programme is reserved Represe
19. your TV set using the 3 5 Stereo Jack Cable to 2 RCA Y Cable GB 15 2 Setup 2 3 Using Component Cable The Component connection is recommended for Digital TV Connect the product to the TV with the Component cable as follows 4 a a GB 16 2 4 Using SCART Cable The SCART cable connection is recommended for Analog TV or VCR Connect the product to the TV with the SCART cable as follows wt Pica aT BO AIDA ABE OF ha LE Porters an mh A 1 FA cored 1d 137 J EAIA Yot ra E i i S000 mA term ret ude boca Bo Cay Laer Si Doll ara M uid O iba Gre boc A Labini Note Connecting your TV directly to the Audio Video output of the product will assure a more vivid picture and enhance your viewing enjoyment GB 17 2 Setup 2 5 Powering On 1 Connect the power cord of the product to a wall outlet 2 Turn on the power switch located at the left side on the back of the product 3 Power on by pressing the STANDBY button of the remote control or the STANDBY h button at the front of the product GB 18 3 Installation Wizard When powering on your product for the first time after purchase the installation wizard will operate automatically This chapter includes the first time setup of the language time search channel and software update which will show you how to start the initial installation Note The default password is 0000 If you have forgotten your password please conta
20. 0 247 8800 Opening Hours Mon Fri 8 30 18 00 E mail uksupport humax digital co uk Website www humax digital co uk Language English Middle East Dubai UAE Tel 971 0 4 359 2323 Opening Hours Sat Thurs 9 00 20 00 Closed on Fri E mail callcenterME humaxdigital com Website www humaxarabia com Language Arabic English Australia Tel 1800 613 011 Opening Hours Mon Fri 9 00 17 30 E mail techinfoau humaxdigital com Website www humaxdigital com australia Language English GB 84 Italy Tel Opening Hours Language Sweden Tel Opening Hours Language Finland Tel Opening Hours Language Austria Tel Opening Hours E mail Website Language 899 100 080 1 VAT min Mon Fri 8 00 18 00 Local time in Italy GMT 1 Italian 46 0 550 85527 Mon Fri 8 00 16 30 Swedish English 09 56186366 Mon Fri 8 00 16 00 Finnish English 01805 778870 0 12 min Mon Sun 8 00 23 00 support humax digital de www humax digital de Deutsch English Turkish Note For hardware repair please visit our website GB 85
21. 0 and 22000 using the OK or y fp button If the required value does not exist select User Define and enter the symbol rate directly FEC 1 Select FEC using the a button 2 Select one option among Auto 1 2 2 3 3 4 5 6 and 7 8 using the OK or button GB 72 10 5 Default Setting Default Setting enables you to restore the product to the factory default Warning Please note that once you perform Default Setting all data such as antenna setting information channel list and all user configured data will be deleted 1 Press the MENU button 2 Select Installation using the a fr button and press the OK i AERE button 3 Select Default Setting using the a we button and press the OK search arnes Software Update 4 Select Yes and press the OK button to restore all setting to factory default To return to the previous menu select No and press the OK or BACK 5 button 5 You will be prompted to enter your password again before starting to load default setting Enter the password to proceed 6 When default setting is completed installation wizard pops up automatically and assists channel search For detailed information about installation wizard refer to Chapter 3 Default Setting Note The default password is 0000 GB 73 11 Software Update In order to maintain proper performance of the product it is essential to have the most up to date software Visit the
22. 1 button to view detailed information of the chosen Press the EPG a button Press the RED O button on the remote control To view all programmes of a certain day press the fp button To return press the fp button the contents are more than one page use the PAGE a4 CCo button to skip to the next page NUMERIC 0 9 buttons on the remote control to switch to a certain channel button You can watch the programme if it is currently on air or reserve it if it is a future programme programme 0100 You can reserve the programme after viewing the programme information When the programme is currently on air Reservation is replaced by Watch 12 00 14 00 120 min The Ny icon indicates reserved programmes You can also use the P P button or the channel list to switch channels GB 32 2 Reserving Programmes You can make reservations for the future programmes you wish to watch automatically 1 Select the programme you want to reserve and press the OK button A pop up will appear 2 To change Channel press the fp button You can also enter the channel number using the NUMERIC 0 9 buttons 3 To change Start Time and End Time enter the time using the EA NECE NUMERIC 0 9 buttons ato TE 15 04 0100 4 To change Date press the fp button You can also enter the gt e date using the NUMERIC 0 9 buttons o Donnie Brasco 5 To change Repeat frequenc
23. 9 5 Channel List 4 Using Lock Unlock 1 Select a channel to lock unlock and press the i button 2 When locking an unlocked channel select Unlock and press the OK button Unlock will become Lock 3 When unlocking a locked channel select Lock and press the OK E button A pop up requiring your password will appear Enter your password and Lock will become Unlock Delete Favourite 112151415 Note The default password is 0000 5 Configuring Menu 1 Press the MENU button on the remote control while the channel list is displayed 2 Alist of options will show Mark the required items and select Save and press the OK button 5 2 Favourite List Favourite List is the list of the favourite channels the user has selected There are five favourite groups in total 1 Press the LIST Gs button while watching a programme 2 Press the GREEN C button on the remote control 3 Press the LIST csr button again and select a favourite group to Favourite view and press the OK button A Favourite 2 4 To change the favourite group displayed press the GREEN C amara 3 Favourite 5 button again GB 30 5 3 Satellite List Satellite List displays the list of channels included in the satellite the user selects 1 Press the LIST Gist button while watching a programme 2 Press the YELLOW _ button on the remote control 3 Press the LIST csr button again an
24. HD Satellite Set Top BOX www humaxdigital com The predefined channel list may return to default setting after OTA has been performed The default password is 0000 If you have forgotten your password please contact your local product distributor User s Manual HDCI 2000 HUMV HDCI2000 200GBAR MN 20000 5720 Notice Copyright Copyright O 2007 HUMAX Corporation Not to be copied used or translated in part or whole without HUMAX s prior consent in writing except approval of ownership of copyright and copyright law Warranty This warranty does not cover parts which may become defective due to misuse of the information contained in this manual Trademarks VIACCESS is a trademark of France Telecom CryptoWorks is a trademark of Philips Electronics N V Irdeto is a trademark of Mindport BV Nagravision is a registered trademark of KUDELSKI S A Conax is a trademark of Telenor Conax AS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited The information in this document is subje
25. Lock gt 12 Programmes are blocked for those under the age 12 15 Programmes are blocked for those under the age 15 18 Programmes are blocked for those under the age 18 Lock All All Programmes are blocked Note e You have to enter your password to watch the programme blocked by the age restriction e The default password is 0000 GB 42 2 Change Password Change Password allows you to change the current password 1 Select the Change Password using the button and press the OK button 2 Enter New Password using the NUMERIC 0 9 buttons al 3 Enter New Password again to confirm Verify Password poe E E Change PRT Parental Contro l aoc ase B gt Note The default password is 0000 3 Installation Lock Installation Lock allows you to block access to the installation menu settings you have previously made 1 Select Installation Lock using the ui fer button 2 Select Enable Disable using the OK or gt button Parental Control Enable Password is necessary when accessing installation menu Disable Access to installation menu is permitted without password GB 43 8 Setting 8 2 Language Setting Language Setting enables you to set the basic language options such as menu language subtitle display and subtitle font 1 Press the MENU button 2 Select Setting using the ua button and press the OK button 3 Select Language Setting using the a b
26. OK button Note For detailed information on using the keyboard refer to 5 1 2 Renaming Channels 2 Locking Unlocking Channels 1 Select the channel you want to lock and press the RED C button on the remote control You can select more than one chamnel Edit C hannels 2 Select Lock using the a button and press the OK button Note e When all selected channels are locked Lock is switched into Unlock When you press Unlock the locked channel is switched into an unlocked channel e To watch locked channels you must enter the password using the NUMERIC 0 9 buttons e The default password is 0000 3 Moving Channels 1 Select the channel you want to move and press the RED C button on the remote control You can select more than one ili Edit Channels channel Todo sroup GQsSelect All Delete 2 Select Move using the a fr button and press the OK gt button The selected channel disappears from the channel list temporarily 3 Move the cursor to the destination in the channel list using the button and press the OK button 4 The selected channel s is moved to the selected location in the given order Fa ga f ra A r m a Note e Move is available only for TV or radio channel lists e The channel number is changed by using Move function GB 50 4 Selecting a Channel Group You can select the channel list group to edit 1 Press the GREEN _
27. OK j button 2 Enter the appropriate value for Satellite Activate Satellite and Satellite Longitude Edit Satellite Data e Satellite 1 Select Satellite using the button 2 Select a satellite to edit using the OK or 4 fp button Activate Satellite 1 Select Activate Satellite using the ws button and press the OK button 2 Select Enable Disable using the OK or gt button Enable Channel search is available Disable Current channel does not exist Channel search unavailable e Satellite Longitude Select Satellite Longitude using the a e button Enter satellite longitude value using the NUMERIC 0 9 buttons Set East West using the OK or 4 pp button Press the OK j button to complete SS OSUNA Note Satellite Longitude is editable for User Define Satellite only GB 59 10 Installation Motor Setting You can set the motor antenna for more efficient channel search Select Motor Setting from Motor Antenna Setting using the e button and press the OK button Motor Setting dd Transponder Motor Driving wa e Satellite 1 Select Satellite using the a we button 2 Select the satellite the antenna is pointing to from the options using the OK or gt button e Transponder Note Goto 10 1 3 Transponder for detailed information e Motor Driving 1 Select Motor Driving using the a e button 2 Select one option among Continuous
28. Signal Level 25 to 75dBm LNB Power amp Polarisation Vertical 13 5V 14 5V at high voltage Horizontal 18V 18 5V at high voltage Current Max 500mA Overload protection 22KHz Tone Frequency 22 4KHz Amplitude 0 7 0 2V DiSEqC Control Version 1 0 1 2 USALS compatible Demodulation QPSK 8PSK Input Symbol Rate DVB S 2 45 Ms s DVB S2 10 30 Ms s QPSK 10 31 Ms s 8PSK FEC mode DVB S Auto 1 2 2 3 3 4 5 6 7 8 DVB S2 Auto 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 QPSK Auto 3 5 2 3 3 4 5 6 8 9 9 10 8PSK MPEG Transport Stream A V Decoding Transport Stream MPEG 2 ISO IEC 13818 Transport Stream Specification Profile Level MPEG 2MP ML MPEG 2 MP HL MPEG 4 AVC H 264 HP L4 Input Rate 15 MB s Max Aspect Ratio 4 3 16 9 Letter Box Video Resolution 720x576 1920x1080i 1280x720P Audio Decoding MPEG MusiCam Layer amp Il Audio Mode Single channel Dual channel Joint Stereo Stereo GB 80 14 Specification Audio Video Data In Out Video Audio Data Power Supply TV SCART FBAS S Video RGB VCR SCART FBAS S Video RCA Typ FBAS Component YPbPr HDMI TV SCART VCR SCART Audio L R SPDIF Digital Audio Output RS 232C 9pin plug Input Voltage AC 90 250 V 50 60 Hz Type SMPS Power Consumption Max 45W Protection Separate internal fuse The input should be protected against lighting
29. ault Setting 1 Automatic Update 1 Select Automatic Update and press the OK button 2 When new software is detected you can choose to download the Software Update software immediately or save for later You can refuse software update if not needed Automatic Update 3 When there is no new software to update a pop up will appear YB current Version y New System Software is avallable gt Do you want to upgrade it now ara ot 2 Manual Update 1 Select Manual Update and press the OK button 2 Enter the values for Satellite Frequency Polarisation Symbol SMATV Search Rate and FEC 3 Select Search and press the OK button 4 When new software is detected you can choose to download the software immediately or save for later You can refuse software update if not needed 5 When there is no new software to update a pop up will appear GB 71 10 Installation Satellite 1 Select Satellite using the a button 2 Select the satellite the antenna is pointing to from the options using the OK or 4 fp button Frequency 1 Select Frequency using the Pue button 2 Enter the frequency using the NUMERIC 0 9 buttons Polarisation 1 Select Polarisation using the a fr button 2 Select one option among Auto Horizontal and Vertical using the OK or 4 fp button Symbol Rate 1 Select Symbol Rate using the a fer button 2 Select one option among 27500 2600
30. ave a 21 pin female connection a cable with male connection at both ends is used for connecting the devices Smartcard A chipcard the same size as a credit card which must be inserted into the digital receiver in order to descramble the TV signals S PDIF Sony Philips Digital Interface format A standard format for the transfer of digital audio signals It allows the transfer of digital audio between two devices without any conversion to and from analogue which could degrade the signal quality S Video Super Video Sometimes referred to as Y C video a technology for transmitting video signals via a cable It is a video signal transmission in which the luminance brightness and the chrominance colour signals are transmitted separately to achieve superior picture clarity Transponder A satellite is divided up in parts called transponders A transponder is one distribution section of the satellite Each transponder can be used for distribution of several channels or services GB 83 16 Service and Support Information concerning troubleshooting software upgrade and product support is provided in the following websites and call centers Should your product require warranty service please contact HUMAX to obtain the appropriate authorization Germany Tel 01805 778870 0 12 min Opening Hours Mon Sat 8 00 20 00 E mail techinfo humax digital de Website www humax digital de Language Deutsch English Turkish UK Tel 087
31. aved at motor antenna to the default setting 1 Select Reset Position using the a button and press the OK button 2 Pop up will appear Select OK and press the OK button to restore all values saved at motor antenna to default setting 3 Please wait during the motor antenna is restored Note Reset may not be activated depending on the condition of the antenna Repeat the procedure above if necessary 3 Transponder 1 Select Transponder in Search Channel using the a e button and press the OK button 2 Select an option for Transponder using the OK or 4p Search Channels button gt Antenna ASTRA 1 Universal Auto Disable 3 To add another transponder select User Define from the list EE 4 Add Transponder screen will appear Enter the values for Channel Type Frequency Polarization Symbol Rate Transmission FEC 2 and Modulation Strength 50 m Quality 30 5 Select Save and press the OK button to complete Frequency 1 Select Frequency using the Pe button 2 Enter the frequency using the NUMERIC 0 9 buttons Add Transponder Polarization 1 Select Polarization using the a fee button 2 Select one option among Auto Horizontal and Vertical using the OK or 4 1 button GB 63 10 Installation Symbol Rate 1 Select Symbol Rate using the a fer button 2 Enter the symbol rate from 2 to 45 Ms s in DVB S Transmission setting 3 Enter
32. ct to change without notice GB 1 Notice Read this manual carefully and make sure you understand the instructions provided For your safety be aware of the following precautions Warnings Cautions and Notes Throughout the whole manual pay special attention to the following marks that indicate hazardous situations Warning Indicates a hazardous situation which could result in serious injury e Caution Indicates a situation which could damage the equipment or other apparatus Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand use and maintain the installation Meaning of Symbols To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel shock or personal injury A This symbol indicates dangerous voltage inside the product that presents a risk of electric N This symbol indicates important instructions accompanying the product Instruction about the WEEE Symbol This product should not be disposed with other household wastes at the end of its working life Please separate this from other types of wastes and recycle it responsibly to promote EA the sustainable reuse of material resources This will prevent possible harm to the environment or human health from uncontrolled waste disposal Domestic users Please contact either t
33. ct your local product distributor 3 1 Language Language allows you to select the main language Select the appropriate language from the list using the OK or 4 button Select Next and press the OK button to save the selected language as default language Note The display language may differ according to country 3 2 Search Channel Search Channel enables you to enter the values such as Satellite LNB Frequency 22kHz Tone and DiSEqC Input of each item and start channel search 1 Satellite Select the required satellite using the OK or button and press the OK button LNB Frequency Select the required LNB frequency using the OK or p gt button and press the OK y button 22kHz Tone Select Enable Disable using the OK or gt button and press the OK button DiSEqC Input Select the required DiSEqC input using the OK or 4 p button and press the OK button Select Next and press the OK button to proceed GB 19 3 Installation Wizard 6 Select Add another satellite of dish and press the OK button to add another satellite You can add up to four satellites 7 Select Next and press the OK button to start channel search YAMAL 102 Universal Auto Disable HOTBIRD Universal Auto Disable 8 Please wait while the search continues If you want to stop the search press the OK button 9 When channel search is com
34. d save the setting for each channel Note Lip Sync is activated only when the programme is broadcast in Dolby Digital GB 22 4 4 Resolution Resolution allows you to set the resolution of the screen 1 Press the V FORMAT sa button 2 The current resolution will be displayed 3 Each time you press the V FORMAT gt button the resolution changes in the following sequence 576p gt 720p gt 1080i 4 5 Option List Option List allows you to set options such as audio teletext and subtitle language You can select the language you prefer in Audio if the current programme is available in multiple audio languages 1 Press the OPT co button 2 Select Audio using the a button and press the button 3 Select the audio language you prefer using the a button and o French press the OK button 4 Select audio direction left right stereo using the button Spanish Note e You can select the required audio language in 8 2 Language Setting e Ifthe programme is broadcast in Dolby Digital you cannot set the audio direction GB 23 4 Basic Operation 2 Teletext You can use your TV remote control unit to control the teletext service All teletext supporting channels have the teletext icon on the i plate 1 Press the OPT cr button 2 Select Teletext using the a Pr button and press the the button Note You can also use the TEXT Ge button on your remote control to
35. d select a satellite to view FS so and press the OK button 0205 CNN Radio 4 To change the satellite list displayed press the YELLOW O A button again ODORANT 5 4 Scramble List Scramble List is the list of channels included in the CAS the user selects 1 Press the LIST ds button while watching a programme 2 Press the BLUE O button on the remote control 3 Press the LIST csr button again and select a CAS to view and MediaGuard press the OK button o 1 Cryptoworks Free Channel 0245 Cartoon Network 4 To change the CAS displayed press the BLUE _ button again 0246 TVBS Europe 0252 Cartoon Network oe GB 31 6 EPG The EPG Electronic Programme Guide displays the detailed programme information of each channel in time and date order You can customize your own programme guide to list the channels or programmes of interest to you and schedule your viewing using the programme information Note Press the EPG or BACK 5 button to exit the EPG screen 6 1 EPG Main EPG Main enables you to view the programme information of a certain channel in time and date order You can reserve programmes view contents information or view the channel list by date lla 2 d Note To move to previous next programmes use the a e button If You can enter the number of the channel using the Select the programme you wish to view and press the OK Press the i
36. e OK or p gt button 5 Scrambled Type 1 Select Scrambled Type using the a button 2 Select one option among All FTA and CAS using the OK or q button 6 Channel Type 1 Select Channel Type using the a er button and press the OK 5 button 2 Select one option among All TV and Radio using the OK or q button GB 65 10 Installation 7 Search Result 1 Select Search and press the OK button 2 Channel search will activate Search Channels 3 To delete search results select the channels you wish to delete using the a fe button Select Delete and press the OK button 11856 V 27500 3 4 4 To save search results select Save and press the OK button Note e When you select Stop during channel search the search will be discontinued and the accumulated search results will show e If there are no channels available a message indicating the result will pop up esla Search Channels 12728 V 22000 5 6 GB 66 10 2 Advanced Search Advanced Search allows you to search channels using the PID information 1 Press the MENU button 2 Select Installation using the a button and press the OK button 3 Select Advanced Search using the using the a fr button and press the OK button Installation Search Channels Software Update 1 Select Antenna using the a button 2 Select an option f
37. e the LNB voltage or connect a signal amplifier Change to a larger dish Change the LNB Set the antenna correctly Confirm if the channel is currently on air aretes The channel has not been deleted by Remove the channel from the channel list and broadcasting company check for new transponder details The channel is for data broadcasting The channel cannot be viewed with the appropriate model that supports data channels Audio not The channel has a video signal but no audio Press the audio button on your remote control available is provided Cl module not installed Invalid Cl module Cl module is not installed Cl module is not inserted correctly Cl module is not recognized Wrong Cl module Cl module is not inserted correctly Cl module is damaged to confirm that the channel has audio options Insert Cl module Reinsert Cl module Insert a different Cl module to check if your existing module is working Insert the correct Cl module Remove and reinsert the Cl module Replace Cl module Short LNB LNB cable is short LNB is internally short Alien substance is inserted in LNB IN port and port may be damaged Replace LNB Cable Replace LNB Remove the alien substance and contact local service center in case damaged has occurred GB 79 14 Specification Tuner Channel Input Connector F Type IEC 169 24 Female Frequency Range 950MHz to 2150MHz
38. ect Dolby Digital using the a fr button and press the OK y button 4 Automatic Selection will appear Select On Off using the OK yy or fp button and press the BACK 5 button to set the value GB 40 7 5 Startup Channel You can assign a certain channel to be displayed when the product is turned on 1 Press the MENU button 2 Select System using the a button and press the OK Startup Channel button m 3 Select Startup Channel using the a button and press the OK button 1 Setting the Startup Channel You can choose to assign a certain channel to be displayed when powering on 1 Setting the Startup Channel using the a fr button 2 Select one option from On Off using the OK or lp button On The assigned channel will be displayed when powering on Off The last channel you have watched will be displayed when powering on 2 Startup Channel You can assign a preferred channel as the start channel 1 Select Startup Channel using the we button 2 Select one option from 100 or User preference using the OK or lp button 3 When you have selected User preference enter the channel agi IN User Preference number using the NUMERIC 0 9 buttons and press the OK 5 button Note When Off is selected Start Channel Number is inactivated You can switch to TV radio by pressing the TV RADIO 5 button on the remote control GB 41 8 Setting In this
39. em Status button 3 Select System Status using the fr button and press the OK 5 button 4 The system information of the product will be displayed Note The information displayed may differ GB 38 7 3 Picture 1 Press the MENU i button 2 Select System using the a button and press the OK Pichire button on 3 Select Picture using the ua button and press the OK E Display Format button Scart Signal AV Control 1 TV Screen Format 1 Select TV Screen Format using the fr button 2 Select one option from 4 3 and 16 9 using the OK or 4 Picture button Sn 2 Display Format 1 Select Display Format using the a button 2 When choosing 4 3 as picture format select one option among Auto Letter Box and Center Mode using the OK y or fp button 3 When choosing 16 9 as picture format select one option among Auto Pillar Box and Full Mode using the OK y or lt p gt button GB 39 7 System 3 Scart Signal 1 Select Scart Signal using the a e button 2 Select one option among CVBS RGB and S Video using the OK y or 4 p button 4 AV Control 1 Select AV Control using the a er button 2 Select On Off using the OK or p gt button 3 When you select Off a notice will appear Read carefully and select Yes 7 4 Dolby Digital 1 Press the MENU button 2 Select System using the button and press the OK button 3 Sel
40. ewed channels Favourite The list of the favourite channels in five groups Satellite The lists of channels classified by satellites Scramble The lists of channels classified by CAS types Note e Press the BACK button to exit the Channel List e The channel list is updated automatically when changes occur e The predefined channel list may return to default setting after OTA has been performed e HD Channels may or may not be available depending on the version of the software 5 1 All Channel List All Channels List allows you to delete rename or include the channels in Favourite You can also use lock unlock functions or configure the menu 1 Press the LIST Gs button while watching a programme 2 Press the RED O button on the remote control while the channel list is displayed 0210 Cartoon Network a 3 Select the channel you wish to view using the button and 0211 TVBS Europe press the OK button HD Channels 0212 Travel Recent Channel 0213 CNN Int 4 You can also enter the channel number using the NUMERIC 0 9 0214 TNT buttons and press the OK button to change to a certain oO Net channel 5 Press the LIST csr button again and select one option among TV Radio HD Channels and Recent Channels and press the OK button 6 To switch to TV Radio HD Channels or Recent Channels press the RED _ button again Note You can switch between TV radio by simply pressing the TV RADIO 5 b
41. he retailer where you purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users Contact your supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Business users Contact your supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal GB 2 Safety and Warning This product has been manufactured to comply with international safety standards Please read the following safety precautions carefully Safety Instructions and Precautions 1 MAINS SUPPLY 90 250V AC 50 60Hz e Operate this product only from the type of power supply indicated on the marking label If you are not sure of the type of power supplied to your home consult your local power company e Disconnect the product from the mains before you start any maintenance or installation procedures OVERLOADING e Do not overload a wall outlet extension cord or adapter as this may result in electric fire or shock LIQUIDS e The product should not be exposed to liquid of any kind In addition no objects filled with liquid should be placed on the apparatus CLEANING e Disconnect the product from the wall outlet before cleaning e Use a light damp cloth no solvents to dust the product VENTILATION
42. ine using the OK or button If the required value does not exist select User Define and enter the LNB frequency directly e LNB Voltage 1 Select LNB Voltage using the button 2 Select one option from Standard and High using the OK or fp button Note When LNB Voltage is set as High a pop up appears Only for LNB cable over 30m Set LNB power High GB 57 10 Installation e Motor Type 1 Select Motor Type using the a f button 2 Select one option from DiSEqC1 2 and USALS using the OK or y fp button E y e DiSEqC1 2 General motor antenna using DiSEqC1 2 USALS Motor antenna using USALS Note When Motor Type is set as DiSEqC 1 2 both My Longitude and My Latitude are set to Disabled e My Longitude Select My Longitude using the a we button Enter my longitude value using the NUMERIC 0 9 buttons Select from East West using the OK or y fp button Po MM a Press the OK button to complete e My Latitude Select My Latitude using the a fe button Enter my latitude value using the NUMERIC 0 9 buttons Select from North South using the OK or p button oS NY a Press the OK button to complete GB 58 Edit Satellite Data You can set the position of the satellite which the motor antenna heads for and decide whether or not to use the satellite 1 Select Edit Satellite Data from Motor Antenna Setting using the button and press the
43. n 10 1 Search Channels Search Channels enables you to configure the installation settings 1 Press the MENU button 2 Select Installation using the a button and press the OK ATA button 3 Select Search Channels using the a wr button and press the Tm OK button 2 SMATV Search Software Update Default Setting 1 Fixed Antenna You can set the antenna and LNB information for channel search If the antenna is not properly set channel search cannot be activated which means you cannot watch any of the programmes on air 1 Select Antenna and press the OK button to view the list of anignnas Search Channels 2 Select a value for Antenna using the OK or gt button 3 Enter the value for Satellite LNB Frequency 22kHz Tone es a DiSEqC Input and LNB Voltage yy at 4 Select Save and press the OK button to complete Channel Type a Strength 50 KEI Quality 30 GB 55 10 Installation Satellite 1 Select Satellite using the a button Antenna Setting 2 Select the satellite the antenna is pointing to from the options using the OK j or p gt button LNB Frequency 3 If the required satellite is not available in the list select User gt lt gt Ec Define When pop up appears select Yes and press the OK LNB Voltage button to view keyboard Enter the name of the satellite and select Save Press the OK button to complete LNB Frequenc
44. n 44 O29 MMS Sed omita narrada rta aaa da aia 45 SAA SINO cara stk ec sto ace A A A RA Hak A Raa cat 47 625 Other SCUINGS ss a a ood ats nent aces oe een ahs Cae e ta ac 48 GB 5 Contents GB 6 9 Edit Channels vaciar AA NAAA 49 9 1 Edit Channels ceiocroraride sra aida atada 49 9 2 EQU Favourite Listas oct dias o as dr dae ad dance aaa sae bet as 52 TOFMSTA AO it AA AR E AA RRA ARA AE eee ate ee A 55 105 Sear Channel Sieh ss e256 sate ete coches rd nds ias is rta lots ida das 55 102 Advanced calor ce eve oe AE RES 67 TOS SMATY SCAR Mt ease eo seme EN A a aa DRAA ee ett ees 69 10 4 Software Update 71 10 5 DefatillS et icse 2 ora iras ar aora o eran a as 73 11 Software Update xi RO E ea RR AAA TR A RA RA 74 1st OTA OVER ING Albesa iras 74 12 Menu Map a ds 76 ES Trouble Shooting ti 77 1ST Trouble SOON ss toos a ata A ete Re RAS 77 19 2 EMO Message ctra aid tadas 79 14 Specification ee 80 A NA 82 16 Service and SUPPO eripi a iioia 84 1 Before Using the Product This chapter provides detailed instructions on the product and its accessories 1 1 Package Contents Please check all package contents before using your product User s Manual HDMI Cable Batteries Note e Faults may occur if the remote control is left without battery for a long time Always keep the battery inserted in the remote control e Package contents may vary according to area GB 7 1 Before Using the Product 1 2 Front Panel
45. nd press the OK button to complete GB 36 5 Search Result 1 After setting more than one required value select Start and press the OK button to proceed 2 The search result of the entered values will appear 3 To reserve a programme select a future programme and press the OK button 4 To search again press the BLUE gt button 0100 15 04 15 40 17 45 Donnie Brasco GB 37 7 System In this chapter you can easily access the service features of the product options such as Cl Module system status picture Dolby aa Digital and startup channel are included in System Note Press the BACK 5 button to save the changes and return to the previous menu Press the MENU 3 button to exit the Menu screen Startup Channel 7 1 Cl Module Cl Module shows you the current status of the Common Interface module 1 Press the MENU button 2 Select System using the button and press the OK button HUMAX HDCI 2000 16 9 Auto RGB Off off On 3 Select Cl Module using the button and press the OK j button 4 The Cl Module information will be displayed Note The displayed information about each Common Interface may differ depending on the type of Common Interface 7 2 System Status System Status allows you to view the system information of the product 1 Press the MENU button 2 Select System using the a button and press the OK Syst
46. nd the power cord plugged in during software update If the power is off during software update fatal damage may be caused to the product e Please be careful not to pull out the signal line LNB cable during software update Update may be interrupted and the product may not operate Note e The predefined channel list may return to default setting after OTA has been performed e Other functions will not activate while software update takes place e It may take 5 10 minutes to update software e Scheduling operation cannot work during software update GB 74 1 New software is found when powering on 1 A message will pop up to notify that a new software is found 2 Select Immediate and press the OK j button to start updating immediately Select Later and press the OK button to update later stand by Select Refuse and press the OK button to return to the previous menu without updating 3 Software download starts Please wait until the update is completed 4 When software update is complete the equipment is automatically powered off and on again Note You can delay the software update up to 10 times when you select Refuse 2 Mandatory Update 1 A message will pop up to notify updating 2 Press the OK button to start updating immediately Note You cannot operate any buttons except for the OK button GB 75 12 Menu Map Setting Installation GB 76 1 Cl Module 2 System S
47. nects to the TV or VCR and outputs video signals 7 HDMI Connects to the TV using HDMI connector 8 RS 232C Connects to the PC to update software 9 S PDIF Outputs the digital audio signals 10 ON OFF Powers on off GB 10 1 5 Remote Control om sy 116 GB 11 1 Before Using the Product 1 SOURCE Controls the input of TV 2 TV RADIO Switches between TV and radio modes 3 NUMERIC 0 9 BUTTONS Enters a TV radio channel number or menu option number 4 EPG Displays the EPG electronic programme guide 5 BACK Closes and returns to the previous menu and screen 6 ARROW BUTTONS Changes the channel or moves the cursor up down left or right 7 COLOUR BUTTONS R G Y B Select colour keys for interactive applications 8 P P Changes the channel 9 MENU Displays the main menu 10 TEXT Enters the digital text service 11 LIST Displays the channel list 12 WIDE Sets the display format 13 STANDBY Switches between operation and standby modes 14 OPT OPTION Displays the audio teletext and subtitle language services 15 LAST Returns to the previous channel 16 0K Selects a menu or confirms the selected operation Also displays the channel list while watching a programme 17 V V Adjusts the audio volume 18 1 INFORMATION Displays the channel and programme information 19 MUTE Mutes or unmutes the audio temporarily 20 PAGE Changes
48. nts parental level Indicates the minimum level of age for viewing the programme AE EELE Displayed only when the channel is a locked channel GB 25 4 Basic Operation 3 Programme name 4 Current time 8 date 5 Next programme information Displayed if next programme information is provided Press the button to display next programme information 6 Programme broadcasting time and progress bar Displays programme playing time and progress bar 7 Detailed programme information Displayed if detailed programme information is provided Note If there is no programme information available programme information is not displayed 2 Detailed Programme Information You can see the detailed information about the current programme Press the i button where the i plate is displayed to view detailed PREMIERE START information ama re Note e Press the i button again to hide the information box e Ifthe detailed programme information is over one page use the PAGE C C button to move to the previous or next page GB 26 5 Channel List This chapter will help you display the channel list using the LIST cs button and switch to another channel in the channel list Seven types of channel lists are provided for quick and easy channel search TV The list of all TV channels Radio The list of all radio channels HD Channels The list of all HD TV channels Recent Channels The list of the recently vi
49. oduct can cause serious injury to a child or adult and serious damage to the appliance 11 LIGHTNING STORM or NOT IN USE e Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time This will prevent damage to the unit due to lightning and power surges 12 EXTRANEOUS OBJECTS e Do not insert anything through the openings in the unit where they can touch dangerous voltage points or damage parts 13 REPLACEMENT of PARTS e When replacement of parts is required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorized substitution may result in additional damage to the unit Warning 1 To avoid damage of the power cord or plug e Do not modify or process the power cord or plug arbitrarily e Do not bend or twist the power cord e Make sure to disconnect the power cord holding the plug e Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting e The mains plug as a disconnection device shall remain readily accessible by the user 2 To avoid electrical shock e Do not open the main body e Do not insert metal or inflammable objects inside the product e Do not touch the power plug with wet hands e Disconnect the power cord in case of lightning 3 To avoid damage of product
50. on to proceed to the next step Note e When there is no new software to update a pop up will appear e For more information about software update refer to 11 Software Update After all setting is complete you can view the result screen Select Finish and press the OK button to complete the installation wizard GB 21 4 Basic Operation This chapter describes the basic functions of the product such as switching channel volume control lip sync option list and programme information You can check or change the settings 4 1 Switching Channel Switching Channel allows you to switch the current channel using one of the following methods 1 Press the P P button 2 Enter the channel number using the NUMERIC 0 9 buttons to move to the channel directly 3 Press the TV RADIO 75 button to switch between TV channels and radio channels Note You can switch channels using the channel list or EPG To return to the previous channel press the LAST button 4 2 Volume Control Volume Control allows you to adjust the audio volume 1 Press the V V gt v button to adjust the audio volume 2 Press the MUTE button to stop the audio temporarily Se Note The mute function remains set while you switch channels 4 3 Lip Sync Lip Sync allows you to adjust the sound difference of video and audio 1 Press the MUTE button for 3 seconds 2 Adjust the Lip Sync an
51. or Antenna using the OK or 4 p button 2 Transponder 1 Select Transponder using the a fr button 2 Select an option for Transponder using the OK or button GB 67 10 Installation 3 Video PID 1 Select Video PID using the a e button 2 Select and option from Auto Hexadecimal and Decimal using Fo RR Saro the OK or 4 p button y J Auto Decimal 4 Audio PID 1 Select Audio PID using the a e button 2 Select and option from Auto Hexadecimal and Decimal using Advanced Search the OK or 4 p button Ox EX lt r 5 PCR PID 1 Select PCR PID using the a button 2 Select and option from Auto Hexadecimal and Decimal using the OK or p button Advanced Search Auto E Hexadecimal Decimal GB 68 10 3 SMATV Search SMATV Search allows you to perform channel search regardless of the setting value in antenna setting 1 Press the MENU button 2 Select Installation using the a button and press the OK Installation button 3 Select SMATV Search using the a fe button and press the OK ees y button Y A 4 Select Search Type using the fe button i Default Setting 5 Select one option from Auto and Manual using the OK or q button 1 SMATV Automatic Search Start End Frequency 1 Select Start End Frequency using the a button SMATV Search 2 Enter the frequency using the NUMERIC 0 9 buttons
52. ote When Motor Type is set as USALS Motor Driving Store Current Position Recalculate is set to Disabled GB 61 10 Installation Installer Menu You can set default setting and operation limit for motor antenna 1 Select Installer Menu from Motor Antenna Setting and press the OK button 2 To save the present location change the Motor Limit to Enable Installer Menu Note When Motor Limit is set to Enable Limit Position and Set Limits are set to Disabled Motor Limit You can set the maximum motor limit both East and West to prevent damage to the antenna 1 Select Motor Limit using the a er button 2 Select Enable Disable using the OK or p gt button Enable Motor limit is set motor does not exceed the limit Disable Setting is released Note When setting new motor limit set to Disable e Limit Position You can set the maximum motor limit both East and West to prevent damage to the antenna 1 Select Limit Position using the a wr button and press the OK button 2 Select from East West using the OK or button East Sets East limit West Sets West limit e Set Limit 1 Select Set Limit using the us button and press the OK button 2 Move the antenna to the Limit Position to set using the OK or uf fp button Note When limit is set Motor Limit is automatically set to Enable GB 62 10 Installation Reset Position You can restore the position s
53. plete the results will appear Press the OK button to proceed to the next step Note e If you cannot find the required LNB frequency from the list select User Define and manually enter the frequency using the NUMERIC 0 9 buttons and press the OK button e When using universal LNB select Universal The 22kHz tone value will be disabled CNN Radio TNT Cartoon Net NL Cartoon Net GB Cartoon Network TVBS Europe Travel CNN Int CNN Radio O 3 CNN Radio O TNT J Cartoon Net NL C Cartoon Net GB Cj Cartoon Network Cj TVBS Europe O Travel CJ CNN Int CNN Radio GB 20 3 3 Time You can set the current time Select GMT Offset and press the OK or button to display the values for GMT offset Select the appropriate GMT offset value using the aa button and press the OK button to set the current time Then select Next and press the OK button Note If GMT offset is Auto it is automatically set depending on your country However if the time is not set properly you can change GMT offset to fit your local time 3 4 Software Update Software Update displays the software version and lets you choose to update the new software When new software is detected you can choose to download the software immediately or save for later You can refuse software update if not needed In case there is no software currently available select Next and press the OK butt
54. s repeated everyday GB 46 8 4 A V Setting You can set the output of the audio or video 1 Press the MENU button 2 Select Setting using the ua fr button and press the OK button 3 Select A V Setting using the button and press the OK button 1 TV SCART 1 Select TV SCART using the a ee button 2 Select one option among CVBS RGB and S Video using the OK A V Control y or lt p gt button 2 VCR SCART 1 Select VCR SCART using the a button 2 Select one option from CVBS and S Video using the OK or button 3 Audio Output 1 Select Audio Output using the aa e button 2 Select one option from Mono and Stereo using the OK or gt button GB 47 8 Setting 8 5 Other Settings You can configure other settings 1 Press the MENU button 2 Select Setting using the ua fr button and press the OK Settina button 3 Select Other Settings using the fr button and press the OK button 1 i Display Time You can set the automatic display time of the information box when the channel is switched 1 Select i Display Time using the a fs button ES 2 Select a value between Disable 1 20 seconds using the OK Other Settings y or fp button Mm i lt pi Note When set to Disable the i plate will not be displayed when you switch the channel 2 OSD Transparency You can set the transparency of On Screen Displa
55. tatus 3 Picture 4 Dolby Digital 5 Startup Channel 1 Parental Control 2 Language Setting 3 Time Setting 4 A V Setting 5 Other Settings 1 Edit Channels 2 Edit Favourite List 1 Search Channels 2 SMATV Search 3 Software Update 4 Default Setting 13 Trouble Shooting 13 1 Trouble Shooting Before contacting your local service centre please read the tips below carefully If the problem persists after completing the following procedure please contact your local product distributor or service centre for further instructions 1 No message displayed on the front panel The product will not switch on Check the main power cable and make sure it is plugged into a suitable power outlet Check that the mains supply is switched on Check that the power switch is on at the rear of the product where applicable Connect the power cable to a different power outlet 2 No picture on TV set Make sure that the product is powered on and in operation mode Press the STANDBY button Make sure that the AV cable is firmly connected to the TV Make sure that the antenna cable is properly connected to the product Make sure that the antenna setting in the menu is correct Check the brightness level of the TV Check if the channel is currently on air Contact the broadcaster to ensure that the channel is running Press the SOURCE button if the product is in external input mode 3 Poor picture sound quality Install the
56. the EPG cc button 2 Press the BLUE _ button to find programme 3 Enter the genre name time and day of the programme Note If you select Reset and press the OK button the default value will appear Name No Name 1 Choosing Genre 1 Select Genre using the a fr button and press the OK button 2 Select the applicable genre using a we p button and press the OK button 3 Select Save and press the OK button to complete Note You can select up to three types of genres GB 35 6 EPG 2 Entering Programme Name 1 Select Name using the a fr button and press the OK button 2 Keyboard will appear Enter the programme name on the keyboard screen 4 Previous Switch to the previous keyboard Next Switch to the next keyboard A ika Change to upper case lower case keyboard 3 Select Save and press the OK button to complete Note You have to enter more than three letters However entering too many letters may cause error 3 Search by Time 1 Select Time using the a button and press the OK button 2 Select the specific time using the a button and press the OK y button 3 Select Save and press the OK button to complete 4 Search by Day of Week 1 Select Day using the button and press the OK button 2 Select the specific day of week using the button and press the OK button 3 Select Save a
57. using the button 2 Select your GMT offset using the OK or fp button 3 A pop up will appear Select Yes and press the OK button cer ors TS Power ON GMT 06 30 GMT 07 00 Note l f Pow GMT 08 00 e The current time is set automatically whenever GMT offset l ee gt GMT 09 30 changes ee GMT 10 00 GMT 11 00 GMT 12 00 f e GMT can be changed in 30 minutes 1 hour units GB 45 8 Setting You can set the time you want the product to be automatically turned on 1 Select Power On using the a Pe button 2 Select Enable Disable using the OK or gt button Time Setting Enable Uses Power On and sets the time the product should be turned on Disable Does not use Power On 3 When you select Enable enter the Channel No and Time using the OK 4 or NUMERIC 0 9 buttons Then select OK and press the OK button Note To enter a radio channel in Channel No press the TV RADIO 5 button to switch to radio 3 Power Off You can set the time you want the product to be automatically turned off 1 Select Power Off using the aa fr button 2 Select Enable Disable using the OK or 4 button Enable Uses Power Off and sets the time the product should be turned off Disable Does not use Power Off 3 When you select Enable enter the Time using the jp or NUMERIC 0 9 buttons Then select OK and press the OK button Note Once Power On Off has been set it i
58. utton and press the OK button 1 Menu Language Menu Language allows you to choose from the given language options and set the language for the menu 1 Select Menu Language using the a e button 2 Select the language you require using the OK or 4 p button 2 Subtitle Display Subtitle Display allows you to show the subtitles automatically This service is provided when subtitles are available 1 Select Subtitle Display using the a j button 2 Select one option from Auto and Manual using the OK or 4 p button Auto Subtitles are displayed automatically in the predefined subtitle language Manual Subtitles are displayed when you press the OPT co button on the remote control and set subtitle GB 44 3 Subtitle Font Subtitle Font enables you to select the font of the subtitle 1 Select Subtitle Font using the a fr button 2 Select one option from Variable and Fixed using the OK or fp button Variable Uses the horizontally variable subtitle font Fixed Uses the fixed subtitle font 8 3 Time Setting Time Setting allows you to set the current time or set the time you want to turn on off the product 1 Press the MENU button 2 Select Setting using the ua fr button and press the OK button 3 Select Time Setting using the a button and press the OK button 1 GMT Offset You can set the current time using GMT Offset 1 Select GMT Offset
59. utton on the remote control GB 27 5 Channel List 1 Deleting Channels 1 Select a channel to delete and press the i button 2 Select Delete using the a button and press the OK button 3 A pop up will appear Select Yes and press the OK button 4 You will be prompted to enter your password Enter your password and press the OK button Note zy El 00908 e You cannot delete items from Recent channel list or Favourite channel list e The default password is 0000 2 Renaming Channels 1 Select a channel to rename and press the i button 2 Select Rename using the a fr button and press the OK gt button 8509 ONID 1 Delete Favourite TE 2ES51415 Unlock GB 28 3 A keyboard will appear Enter the name of the channel you wish to rename 4 Previous Switch to the previous keyboard Next Switch to the next keyboard A ira Change to upper case lower case keyboard 4 Select Save and press the OK button to confirm your choice 3 Including Channels in Favourite Group 1 Select a channel to put into the favourite channel list and press the i button 2 Select Favourite using the ua fr button and press the OK button 3 Select one or more groups from the five favourite groups and press the OK button 4 Select Save and press the OK button ete Favourite 2 2 Favourite 4 Favourite 5 GB 2
60. uture programme 6 3 Schedule List Schedule List displays the list of the programmes reserved You can modify delete or make new reservations 1 Note 1 Modifying Schedule 1 2 Reservation pop up will appear Enter the modified values and 2 Press the YELLOW button to display the schedule list 3 4 Select the programme you want to edit using the a button Press the EPG a button The reserved programmes will be displayed in time order and press the OK button Press the i button to view detailed programme information Select Modify using the button and press the OK i button press the OK button GB 34 2 Deleting Schedule 1 Select Delete using the a button and press the OK button 2 A pop up will appear Select Yes and press the OK button 3 New Reservation 1 Select a blank space using the a button and press the OK button 2 Reservation pop up will appear Enter the channel number start end time date repeat frequency and programme name and press the OK j button Refer to 2 Reserving Programmes in EPG Main Note e Reservations for deleted channels or past programmes are automatically deleted e In case the channel number has changed reservation has to be done again 6 4 Find Programme Find Programme enables you to find the programme you want by entering the genre name time and the day of the programme 1 Press
61. y 1 Select OSD Transparency using the button 2 Select one option among Disable 25 50 and 75 using the OK or gt button Disable Fully opaque screen 25 50 75 The bigger the number the more transparent the screen GB 48 9 Edit Channels In this chapter you can edit all channels or make changes to the favourite lists of the channels you have chosen Note e Press the BACK 5 button to save the changes and return to the previous menu Press the MENU button to exit the menu screen e Press the TV RADIO F5 button on the remote to move to TV or radio channel list directly 9 1 Edit Channels Edit Channels enables you to rename lock unlock move the channels and select channel group select all or delete the chamnels 1 Press the MENU button 2 Select Edit Channels using the fs button and press the OK y button 3 Select Edit Channels using the ua fr button and press the OK Edit Favourite List gt button Edit Channels Note The default password is 0000 1 Renaming Channels 1 Select the channel you wish to rename and press the RED C button on the remote control You can select one channel at a time gt 2 Select Rename using the a fr button and press the OK gt button GB 49 9 Edit Channels 3 Enter a channel name directly using the keyboard displayed on the screen 4 When entering channel name is complete select Save and press the
62. y 1 Select LNB Frequency using the a Pe button 2 Select one option among Universal 9750 10600 5150 11475 and User Define using the OK or 4 button If the required value does not exist select User Define and enter the LNB frequency directly Note If you select Universal the 22KHz Tone value is set to Disabled 22KHz Tone 1 Select 22KHz Tone using the a button 2 Select Enable Disable using the OK or p gt button Enable Dual LNB is used or two antennas are connected to the 22KHz tone switch box Disable 22KHz is not in use DiSEqC Input 1 Select DiSEqC Input using the a ee button 2 Select one option among Disable DiSEqC A D and Tone Burst A B using the OK or 4 button LNB Voltage 1 Select LNB Voltage using the a button 2 Select one option from Standard and High using the OK or p gt button Note When LNB Voltage is set as High a pop up appears Only for LNB cable over 60m Set LNB power High GB 56 2 Motor Antenna When using a motor antenna set the antenna to Motor before performing channel search 1 Press the OPT Grr button to switch to motor antenna in Antenna Setting mode 2 A pop up message will appear Select Yes and press the OK i button Motor Type You should set the motor type before motor antenna setting e LNB Frequency 1 Select LNB Frequency using the a e button 2 Select one option among Universal 9750 10600 5150 11475 and User Def
63. y press the fp button to choose pa from Once Daily and Weekly 6 To change Programme Name enter the name of the programme in the screen keyboard Select Save and press the OK button Note The default password is 0000 3 Channel List You can change the channel using the channel list 1 Press the LIST Gs button to view the channel list 2 Select the channel you want using the a button and press the OK button If the contents are more than one page use PAGE gt gt button to skip to the next page 3 The EPG for the selected channel is displayed E PREMIERE 3 meere 4 PREMIERE 4 Note You can switch between TV radio by simply pressing the E TV RADIO 3 button on the remote control A So PREMIERE SDE PREMIERE SPORT 1 GB 33 6 EPG 6 2 EPG Table EPG Table displays the programme information of each channel based on the date and time You can look up the programmes and make reservations l 2 3 Move to another channel using the a button If the contents Press the EPG a button Press the GREEN C button to display EGP table Move to the previous next programme within the same channel using the fp button are more than one page use PAGE lt gt gt button to skip to the next page You can enter the channel number you wish to view using the NUMERIC 0 9 buttons Press the OK button to view the programme now or reserve if it is a f

Humax HDCI-2000 Satellite TV System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents