Honda Power Equipment WDP30X Marine Sanitation System User Manual
Contents
1. NOTE e Disconnect the USB device before pressing the lt Reset gt button Pressing the lt Reset gt button with the USB device connected can damage the data stored in the USB device For how to disconnect the USB device see How To Play Music P 16 e When the unit is turned on after resetting the Initial SETUP screen appears See First Step P 6 DIDO Eni BYAB ND O 5210 53 PADI ND Coho 210 BYA BIND Con he mD DINDA DIN D C e104 BIND 0101010 4 i Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual AWARNINGS Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury When navigating carefully compare information displayed on the navigation system to all available navigation sources including information from street signs visual sightings and maps For safety always resolve any discrepancies or questions before continuing navigation Always operate the vehicle in a safe manner Do not become distracted by the navigation system while driving and always be fully aware of all driving conditions Minimize the amount of time spent viewing the scr2. Outgoing Calls Missed Calls Preset 3 Direct Number Voice Menu Call by entering a phone number Touch Direct Number 2 Enter a phone number with number keys 3 Touch i Call using call records Touch Incoming Calls Outgoing Calls or Missed Calls 2 Select the phone number from the list 3 Touch Wi Redial 1 Touch Redial to display the previously called number 2 Touch B Call using the phonebook Touch Phonebook 2 Select the name from the list 3 Select the number from the list 4 Touch Ej Call using the preset number Touch Preset to start calling the corresponding phone number Call by voice DIYA DIK You can make a voice call using the voice recognition function of the cell phone Touch Voice 2 Pronounce the name registered in the cell phone NOTE For detailed operation see Using Hands Free Unit P 72 in the Instruction Manual Quick Start Guide Installation Procedure Before Installation Before installation of this unit please note the following precautions NWARNINGS If you connect the ignition wire red and the battery wire yellow to the car chassis ground you may cause a short circuit that in turn may start a fire Always connect those wires to the power source running through the fuse box Do not cut out the fuse from the ignition wire red and the battery wire yellow The power supply must be connected to the wire
3. procedures other than those specified herein may result in hazardous radiation exposure In compliance with Federal Regulations following are reproductions of labels on or inside the product relating to laser product safety JVC KENWOOD Corporation 2967 3 ISHIKAWA MACHI HACHIOJI SHI TOKYO JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE Location Top plate DNX7190HD DNX6990HD DNX6190HD DNX5190 DNX5060EX IC Industry Canada Notice Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The term IC before the certification registration number only signifies that the Industry Canada technical specification were met ACAUTION This equipment complies with FCC IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines in Supplement C to OET65 and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person s body excluding extremities hands wrists feet and ankles Under
4. Connect to the terminal that is grounded when either the telephone rings or during conversation To use the Mute feature you need to hook up this wire to your telephone by using a commercial telephone accessory Depending on what antenna you are using connect either to the control terminal of the motor antenna or to the power terminal for the booster amplifier of the film type antenna Max 300mA 12V When using the optional power amplifier connect to its power control terminal If no connections are made do not let the cable come out from the tab Black Ground wire To car chassis Accessory 1 a Red Igniti i 4 ed Ignition wire Yellow Battery wire Light Blue Yellow Steering remote control wire m m m m oe oe oe oy STEERING WHEEL REMOTE INPUT I I eee eee J REMOTE CONT Orange White Dimmer control wire ILLUMI Brown Mute control wire MUTE Blue Antenna control wire ANT CONT Blue White Power control wire 1 P CONT DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX A System connection Refer to thebox bew DIKO DINED Jo Le Refer to the box2 below the box2 below iPod AV IN2 CA C3AV Optional Accessory AV input CA C3AV input Optional accessory Accessory 1 To Camera control terminal pen
5. Radio or SIRIUS XM The unit switches to the radio HD Radio tuner SIRIUS XM Satellite Tuner source 3 Operate on the source control screen Station search 1 Touch zy Rees Sub function menu appears ru 2 Touch AM or FM to select the band Radio HD Radio tuner only 3 Touch ka or gt gt to tune in the desired Station Auto memory Radio HD Radio tuner only 1 Touch gy Sub function menu appears Touch AM or FM to select the band Touch K Touch AME Touch lt lt or gt gt in the sub function menu Auto memory starts Recalling the preset station 1 Touch P You can also display the preset list by touching the frequency display in the center 2 3 A 5 i A A SA NOTE For other operations see Radio HD Radio tuner Basic Operation P 50 and SIRIUS XM Basic Operation P 53 in the Instruction Manual i How To Make A Phone Call You can use your Bluetooth cell phone when paired to this unit 7 Register your cell phone to the unit Follow as the procedures shown below For detailed operation see Registering the Bluetooth Unit P 69 in the Instruction Manual 1 Press the lt TEL gt button and touch BT SETUP 2 Touch SET of Regist New Device in the Bluetooth SETUP Bluetooth SETUP screen jushectccenhare Regist New Device Receiver PIN Code 1234 Bluetooth AF Auetio _ E Front Ony f i j Menu 3 Touch PIN Code Set in the Sea
6. navigation system for any purpose requiring precise measurement of direction distance location or topography The Global Positioning System GPS is operated by the United States government which is solely responsible for its accuracy and maintenance The government system is subject to changes that could affect the accuracy and performance of all GPS equipment including the navigation system Although the navigation system is a precision navigation device any navigation device can be misused or misinterpreted and therefore become unsafe IMPORTANT INFORMATION E Vehicle Battery Preservation This navigation system can be used when the ignition key is turned to ON or ACC To preserve the battery however it should be used with the engine running whenever possible Using the navigation system for a long time with the engine switched off can cause the battery to run down p Map Data Information One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost We use a combination of governmental and private data sources which we identify in product literature and copyright messages displayed to the consumer Virtually all data sources contain some inaccurate or incomplete data In some countries complete and accurate map information is either not available or is prohibitively expensive Quick Start Guide i First Step Power on the unit
7. 01010 4 i Precautions AWARNING To prevent injury or fire take the following precautions To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit Do not watch or fix your eyes on the unit s display when you are driving for any extended period If you experience problems during installation consult your Kenwood dealer Precautions on using this unit e When you purchase optional accessories check with your Kenwood dealer to make sure that they work with your model and in your area You can select language to display menus audio file tags etc See Language setup P 84 in the Instruction Manual e The Radio Data System or Radio Broadcast Data System feature won t work where the service is not supported by any broadcasting station B Precautions on battery Keep battery out of reach of children and in original package until ready to use Dispose of used batteries promptly If swallowed contact physician immediately Do not leave the battery near fire or under direct sunlight A fire explosion or excessive heat generation may result Do not set the remote control in hot places such as on the dashboard Danger of explosion if Lithium battery is incorrectly replaced Replace only with the same or equivalent type E Protecting the monitor To protect the monitor from damage do not operate the monitor using a ballpoint pen or si
8. 3 Digital Sound iTunes Tagging Artist Experience Siriusxm J Bluetooth MIDOLEY dts READY DIGITAL 2 0 Channel DVD Made for Ay Designed for works with ae m H i PANDORA VIDEO iPod iPhone M fn Media internet radio DI VX
9. Equalizer screen Instruction Manual P 99 e Pressing for 1 second switches camera view display on off NAV e Displays the navigation screen e Pressing for 1 second switches AV out sources MENU e Displays the Top Menu screen Instruction Manual P 14 i fe ee e Pressing for 1 second turns the power off e When the power off turns the power on e Displays the Hands Free screen Instruction Manual P 68 Pressing for 1 second displays the Screen Control screen e Ejects the disc le D e When the panel is opened pressing closes the panel and pressing for 1 second ejects the disc forcibly e When the panel is closed pressing for 1 second fully opens the panel to the location of the SD card slot Remote Receives the remote control signal Sensor slot SD card slot An SD card slot for upgrading the map For how to upgrade the map refer to the instruction manual of the navigation system Disc insert A slot to insert a disc media The display may not switch to the Graphic Equalizer screen in some conditions Quick Start Guide E DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX ONK6490BT 2 DNX6990HD i DNX6490BT KENWOOD Mette E nea gt an v Pinnan E How To Insert A MicroSD Card 1 Open the fo microSD card slot cover as the diagram in the right 2 Hold the microSD card with the label facing left and the notched section up and in
10. Industry Canada regulations this radio transmitter may only operate using an antenna of a type and maximum or lesser gain approved for the transmitter by Industry Canada To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that necessary for successful Communication This device complies with RSS 310 of Industry Canada Operation is subject to the condition that this device does not Cause harmful interference DNX7190HD DNX6990HD DNX6190HD Contains Transmitter Module FCC ID RKXFC6000S Contains Transmitter Module IC 5119A FC6000S DNX5190 DNX5060EX Contains Transmitter Module FCC ID XQN BTR60X Contains Transmitter Module IC 9688A BTR601 DNX7190HD DNX7490BT DNX6990HD DNX61 90HD DNX6490BT DNX5 190 DNX5060EX DNX7490BT DNX6490BT E The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis case and says that the component uses laser beams that have been classified as Class 1 It means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit E CALIFORNIA USA This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate H Radio PSD HD2 HD
11. KENWOOD DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX GPS NAVIGATION SYSTEM Quick Start Guide JVC KENWOOD Corporation Take the time to read through this instruction manual Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product Model DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX Serial number US Residence Onl Register Online Register your Kenwood product at www Kenwoodusa com 2011 JVC KENWOOD Corporation B59 2098 00 03 K K2 R l About The Quick Start Guide l Contents This Quick Start Guide explains Precautions 3 the basic functions of this unit For AWARNING o 3 functions not covered in this guide CleaningThe Unt si refer to the Instruction Manual PDF HowTo Reset YourUnit_ 4 file contained in the included CD Satay d ROM Instruction Manual i s eee AA R 5 mportant Information To refer to the Instruction Manual ean 7 contained in the CD ROM a PC ETONE a i loaded with Microsoft Windows XP SE Vista 7 or Mac OS X 10 4 or later IMPORTANT INFORMATION _____ 5
12. Receives the remote control signal Sensor You can enable or disable this feature by Remote Sensor Instruction Manual P 83 Mii e A Eject e Ejects the disc Pressing for 1 second ejects the disc forcibly A slot to insert a disc media slot MicroSD A microSD card slot for upgrading the map For how to upgrade the map card slot refer to the instruction manual of the navigation system el Le e The display may not switch to the Tone Control screen in some conditions Quick Start Guide Common Operations E General There are some functions which can be operated from most screens DVD SETUP Menu Language en Subtitle Language en Audio Language en Dynamic Range Control po Normal hal List screen There are some common function keys in the list screens of most sources s Category List XYZ E 4 Cc r To Tatafa DI i Ja Spring song riist r song Ja Autumn song ci 1A de Winter song 4 Morning song Ja Aftemoon song Menu E Flick scrolling Menu Returns to the Top Menu screen RETURN Returns to previous screen common menu key Touch to display the common menu The contents of the menu are as follows F Displays the EXT SW Control screen f Displays the SETUP Menu screen Displays the Audio Control Menu screen Displays the control screen of current source Icon feature differs depending on the source Closes the menu Pay lt S
13. and perform some setup steps before using DNX7 2 Press the lt MENU gt button The unit is turned on To turn off the unit Press the lt MENU gt button for 1 second PIXO PED Press the lt MENU gt button KENWOOD The unit is turned on To turn off the unit Press the lt MENU gt button for 1 second The Initial setup is only necessary when you use the unit for the first time after purchase and when you reset the unit 7 Touch the corresponding key and set the value American English en Angle iPod AV_Interface Use reer ee ee iPod AVIN Color EXT SW Camera Language Select the language used for the control screen and setting items Default is American English en After setting touch Enter Angle Adjust the position of the monitor Default is o After setting touch E iPod AV Interface Use Set the terminal which your iPod is connected to Default is iPod Color Set the screen and button illumination color You can select whether to perform color scan and adjust scanning color After setting touch E3 EXT SW Pike Control the external devices After setting touch a Camera Set the parameters for the camera After setting touch E3 OEM SETUP This function requires a commercial adaptor Consult your Kenwood deale
14. ce from the cable DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX 2 Control the music you are listening to on the source control screen The following symbols indicate the keys on the screen The functions of the keys are the same despite the difference of the source you are listening to Basic operations from this screen Plays or pauses gt il Stops playing E Disconnects the device a Searches the previous next content lt lt gt P Fast forwards or Fast backwards Disc lt lt or media CD USB device only move the cursor in the center bar Repeats current content Plays all contents in random order NOTE For other operations refer to the Instruction Manual If desired key is not displayed in the multi function bar touch the Ke to switch the menu 3 Search the track file you want to listen to List search 1 Touch center of the screen The content list of the media being played is displayed If the information of the current track only is displayed touch ZW to switch the list display Refined search 1 Touch K 2 Touch the desired refinement method The list is refined by the item you selected 3 Touch the desired item NOTE For details on searching operations refer to Search Operation P 34 in the Instruction Manual i How To Play Movie Picture You can play DVD video Video CD VCD movie files from disc media iPod and pi
15. croll Scrolls the displayed text Touch keys with various functions are displayed here Displayed keys differ depending on the current audio source status etc For examples see List screen P 16 in the Instruction Manual You can scroll the list screen by flicking the screen up down or right left 5 Category List O f ng song oon song f Favorite gt Gali Load More Albums y F L DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX i How To Use The Navigation System 7 Press the lt NAV gt button to display the navigation screen 2 Operate the desired function from the Main Menu screen 7 GPS satellite strength 2 Finds a destination E B Views the map Where To View Map a He 4 Adjusts the settings Settings Tools 5 Uses the tools such as ecoRoute and Help NOTE You can get additional information about using the navigation system from Help To display Help touch Tools and then touch Help R p Where Am I Help Routes N w QO My Data World Clock Calculator pa y For more information about your navigation system download the latest version of the Owner s Manual from manual kenwood com edition im345 3 Enter your destination and start the guidance Finding points of interest NOTE 1 Touch Where To To enter letters contained in the name 2 Touch Points of Interest touch Where To Poi
16. cture files from USB storage device NOTE For details on playable file format device format etc refer to the Instruction Manual 7 Connect the media you want to play For the method of connecting see How To Play Music P 16 2 Control the movie picture by touching the screen Each area on the screen has a separate function 1 2 3 DVD Displays the DVD menu Displays the Source Searches the next previous content or VCD Displays the Zoom Control Control screen file screen Scrolling from center of display to left Disc media Displays the disc menu or right performs fast backward or fast forward To stop fast backward forward touch center of the display 4 See DVD Disc Menu Operation P 23 in the Instruction Manual 2 See Zoom Control For DVD And VCD P 24 in the Instruction Manual 3 See Movie Control P 39 in the Instruction Manual 4 For iPod USB this function may be unavailable depending on the playing file format NOTE For operations on the source control screen see How To Play Music P 16 However searching by category link album artwork is not available Touching displayed by touching cw in the source control screen hides all keys DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX How To Listen To The Radio HD Radio tuner SiriusxM Satellite Tuner 7 Touch Menu on any screen Top Menu screen appears 2 Touch TUNER HD
17. d 2 Find your model and select Software Updates gt Download 3 Read and accept the terms of the Software License Agreement 4 Follow the instructions on the Web site to complete the installation of the software update Updating maps You can purchase updated map data from Garmin or ask your Kenwood dealer or Kenwood service center for details 1 Go to www garmin com Kenwood 2 Select Order Map Updates for your Kenwood unit 3 Follow the Web site instructions to update your map i How To Play Music You can play audio files from music CD disc media USB storage device and iPod NOTE For details on playable file format media format iPod model etc refer to the Instruction Manual 7 Connect the media you want to play as shown below 1 Press the lt gt button to open the front panel 2 Insert the disc into the slot gt The panel closes automatically and playback starts To eject the disc Press the lt 4 gt button 1 Insert the disc into the slot gt Playback starts To eject the disc Press the lt gt button 1 Connect the iPod with the iPod cable gt Playback starts To disconnect the device Touch ISI on the screen and then touch amp for 1 second Disconnect the iPod from the cable 1 Connect the USB device with the USB cable gt Playback starts To disconnect the device Touch amp for 1 second on the screen and disconnect the devi
18. e Green Red eee Green White Blue Red To Relay Box RELAY 1 Rear View Camera Input poee aes Yellow Visual Input i OL Audio Visual Output ig Yellow Visual Output i OOQ White Audio Left Output Red Audio Right Output Rear Preout 2 Red Audio Right Output s a White Audio Left Output r pad Front Preout F OO Red Audio Right Output White White ATANT i White Audio Left Output Use an RCA cable as shown in 2 I Subwoofer Preout above diagram Red Audio Right Output White Audio Left Output Quick Start Guide H Optional accessory connection iPod commercially available USB device commercially available LELI KCA iP202 Optional Accessory USB terminal 0 8m USB terminal USB maximum i power supply USBterminal current DC5SVIIA I OOC Neni he z AJ DNX7190HD DNX6990HD DNX6190HD DNX5190 DNX5060EX only SIRIUS XM Satellite Radio tuner DID bel a BYAB NYO 3510 53 PADI ND Coho 210 BYA BIND Con be 0 mD DINDO ADINDA BIND 0101010 4 About This Unit E Copyrights The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by JVC KENWOOD Corporation is under license Other trademarks and trade names are those of their respective owners e The AAC logo is a trademark of Dolby Laboratories e iTunes is a trademark of Apple Inc e Mad
19. e for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPhone iPod iPod classic iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries e Sirius XM and all related marks and logos are trademarks of Sirius XM Radio Inc All rights reserved e HD Radio Technology manufactured under license from iBiquity Digital Corporation U S and Foreign Patents HD Radio and the HD HD Radio and Arc logos are proprietary trademarks of iBiquity Digital Corp DVD is a trademark of DVD Format Logo Licensing Corporation registered in the U S Japan and other countries This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited e Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories e Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued am
20. een of the navigation system while driving and use voice prompts when possible Do not enter destinations change settings or access any functions requiring prolonged use of the navigation system controls while driving Stop your vehicle in a safe and legal manner before attempting such operations Keep the system volume at a low enough level to be able to hear outside noises while driving If you can no longer hear outside noises you may be unable to react adequately to the traffic situation This may cause accidents The navigation system will not display the correct current position of the vehicle the first time it is used after purchase or if the vehicle battery is disconnected GPS satellite signals will soon be received however and the correct position will be displayed Be careful of the ambient temperature Using the navigation system at extreme temperatures can lead to malfunction or damage Also note that the unit can be damaged by strong vibration by metal objects or by water getting inside the unit 5 ACAUTIONS Failure to avoid the following potentially hazardous situations may result in injury or property damage The navigation system is designed to provide you with route suggestions It does not reflect road closures or road conditions weather conditions or other factors that may affect safety or timing while driving Use the navigation system only as a navigational aid Do not attempt to use the
21. el the release coated paper of double face adhesive tape to fix on the place shown above A Depending on the type of car reception of the GPS satellite signals might not be possible with an inside installation The GPS antenna should be installed at a position that is spaced at least 12 inch 30 cm from cellular phone or other Adjust the direction of the transmitting antennas Signals from the GPS satellite may be interfered with by microphone to the driver these types of communication Painting the GPS antenna with metallic paint may cause a drop in performance Continued Quick Start Guide NOTE e Install the microphone as far as possible from the cell phone Removing Procedure Removing the hard rubber frame escutcheon 1 Engage the catch pins on the removal tool accessory and remove the two locks on the lower level Lower the frame and pull it forward as shown in the figure Catch Yo NOTE The frame can be removed from the top side in the same manner 2 When the lower level is removed remove the upper two locations gt ie Removing the unit 1 Remove the hard rubber frame by referring to step 1 in Removing the hard rubber frame 2 Insert the two removal tools accessory deeply into the slots on each side as shown 3 Lower the removal tool toward the bottom and pull out the unit halfway while pressing toward
22. et radio are as follows iPhone or iPod touch e Use an Apple iPhone or iPod touch running under iOS3 or later e Search for Pandora in the Apple iTunes App Store to find and install the most current version of the Pandora application on your device e iPhone iPod touch connected to this unit with a KCA iP202 Android e Visit the Andoid marketplace and search for Pandora to install e Bluetooth must be built in and the following profiles must be supported SPP Serial Port Profile A2DP Advanced Audio Distribution Profile BlackBerry e Visit www pandora com from the built in browser to download the Pandora application e Bluetooth must be built in and the following profiles must be supported SPP Serial Port Profile A2DP Advanced Audio Distribution Profile NOTE e The Pandora service is available only in the US e Because Pandora internet radio is a third party service the specifications are subject to change wihtout prior notice Accordingly compatibility may be impaired or some or all of the services may become unavailable Some Pandora functionality cannot be operated from this unit e For issues using the Pandora application please contact Pandora at pandora support pandora com e PANDORA the PANDORA logo and the Pandora trade dress are trademarks or registered trademarks of Pandora Media Inc used with permission Quick Start Guide E FCC WARNING This equipmen
23. he Bluetooth antenna Bluetooth antenna unit DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX Installation Procedure BR Unit 1 To prevent a short circuit remove I Supplied accessories the key from the ignition and disconnect the terminal of the First of all make sure that all battery accessories are supplied with the 2 Make the proper input and unit output wire connections for each D D 6 pale 3 Connect the speaker wires of the 9 wiring harness 4 Connect the wiring harness wires in the following order ground battery ignition 2 1 DIET veo 5 Connect the wiring harness connector to the unit 6 Install the unit in your car 7 Reconnect the terminal of the battery 8 Press the lt Reset gt button P 4 9 Perform the Initial Setup See First Step P 6 Non Japanese cars 1 PEED 0 1 SS s Bend the tabs of the i mounting sleeve with a screwdriver or similar utensil and attach it in place Continued Quick Start Guide Toyota Nissan or Mitsubishi car Toyota Scion cars PLN GD M5x6mm or 1 Cut out accessory as illustrated Q M5x7mm Car Bracket X Cutting line be e aN M5x6mm or M5x7mm NOTE e Make sure that the unit is installed securely in place If the unit is unstable it may 2 Fold double sided adhesive malfunction eg the sound may skip accesso
24. is required in addition to Adobe First Step 6 Reader 7 1 or Adobe Acrobat 7 1 Basic Operations 8 or later Functions Of The Buttons The Instruction Manual is subject On The Eront Panel 8 to change for modification of CommonOpertions _ P specifications and so forth You can E download the latest version of the How To Use The Navigation Instruction Manual from http System 13 manual kenwood com edition OtherFeatures oS m345 How To Play Music 16 How To Play Movie Picture 18 banda How To Listen To The Radio HD e The panels shown in this guide are Radio 19 examples used to provide clear adio tuner explanations of the operations For this How To Make A Phone Call 20 reason they may be different from the actual panels Installation Procedure 22 e In this manual each model name is Before Installation ___ Y 22 abbreviated as follows l DNX7190HD and DNX7490BT PIED Installation Procedure Cs i D DNX6990HD DNX6190HD and Removing Procedure 26 DNX6490BT DYO Connection i l 27 DNX5190 and DNX5060EX DIV About This Unit 31 If above icons are showed read the article applicable to the unit you use In operation procedures bracket shape indicates the key or button you should control lt gt indicates the name of panel buttons J indicates the name of touch keys DINA bel a BYAB NYO 3210 53 PADI ND Coho 210 5 BYA DINARO miD DINDO gt WA DIN D C be 074 BIND 01
25. milar tool with the sharp tip RA Lens fogging When you turn on the car heater in cold weather dew or condensation may form on the lens in the disc player of the unit Called lens fogging this condensation on the lens may not allow discs to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer x Precautions on handling discs Do not touch the recording surface of the disc e Do not stick tape etc on the disc or use a disc with tape stuck on it Do not use disc type accessories Clean from the center of the disc and move outward e When removing discs from this unit pull them out horizontally If the disc center hole or outside rim has burrs use the disc only after removing the burrs with a ballpoint pen etc e Discs that are not round cannot be used 8 cm 3 inch discs cannot be used e Discs with coloring on the recording surface or discs that are dirty cannot be used This unit can only play the CDs with de Wee whee DIGITAL l AUDIO This unit may not correctly play discs which do not have the mark You cannot play a disc that has not been finalized For the finalization process see your writing software and your recorder instruction manual Quick Start Guide W Acquiring GPS signal The first time you turn on this unit you must wait while the system ac
26. nts of Interest 3 Select a category anda Spell Name subcategory e To search for a location in a different area 4 Select a destination touch Where To and then touch Near 5 Touch Go Continued Quick Start Guide 4 Follow your route to the destination NOTICE The speed limit icon feature is for information only and does not replace the driver s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs Your route is marked with a magenta line As you travel your navigation system guides you to your destination with voice prompts arrows on the map and directions at the top of the map If you depart from the original route your navigation system recalculates the route 300 Bundy Dr Views the Next Turn page or the junction view page when available Views the Turn List page Views the Where Am I page Zooms in and out Returns to the Main Menu lf ei el eS Displays a different data field Views the Trio Computer N NOTE e Touch and drag the map to view a different area of the map A speed limit icon could appear as you travel on major roadways Adding a stop 1 While navigating a route touch ISi and then touch Where To 2 Search for the extra
27. p pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Channel is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved e Adobe Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries e Android is a trademark of Google Inc e BlackBerry RIM Research In Motion and related trademarks names and logos are the property of Research In Motion Limited and are registered and or used in the U S and countries around the world Used under license from Research In Motion Limited e ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos e ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration e Divx DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Requirements Pandora internet radio Requirements for listening to the Pandora intern
28. quires satellite signals for the first time This process could take up to several minutes Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition After the system acquires satellites for the first time it will acquire satellites quickly each time thereafter Ea About the front panel When removing the product from the box or installing it the front panel may be positioned at the angle shown in Fig 1 This is due to the characteristics of mechanism the product is equipped with When the product is first powered on works properly the front panel will automatically move into the position initial setting angle shown in Fig 2 Fig 1 Fig 2 Cleaning The Unit If the faceplate of this unit is stained wipe it with a dry soft cloth such as a Silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with neutral cleaner then wipe it again with a clean soft dry cloth A Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print How To Reset Your Unit If the unit or the connected unit fails to operate properly reset the unit 1 Press the lt Reset gt button The unit returns to factory settings PIYA a auo KENWOOD
29. r for details DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX 2 Touch Finish NOTE For details on operations of each setting refer to the Instruction Manual Quick Start Guide i Basic Operations Functions Of The Buttons On The Front Panel al DNX7190HD DNX7490BT Troe noo E How To Insert An SD Card 1 Press 8 lt 4 gt button for 1 second The panel fully opens 2 Hold the SD card as the diagram in the right and insert it into the slot until it clicks To eject the card Push the card until it clicks and then remove your finger from the card The card pops up so that you can pull it out with your fingers DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX Number Name Motion 7 V Reset e If the unit or the connected unit fails to operate properly the unit returns to factory settings when this button is pressed Instruction Manual P 111 If the SI function is turned on this indicator flashes when the vehicle ignition is off Instruction Manual P 84 ATT e Switches attenuation of the volume on off N e North America Sales area Pressing for 1 second stores the tag data of the current music from HD Radio tuner or SiriusXM Instruction Manual P 60 e Central and South America sales area Pressing for 1 second turns the screen off v A Vol Adjusts volume AUD e Displays Graphic
30. rched Device Searched Device List List screen _ _ Search End 4 Enter PIN code and touch Enter De 5 Select your cell phone from the displayed list in the Searched Device List screen Registering is completed Search Cancel iJ mae LISE Wice List 2 Chevboe List 3 A mpm LISE 4 2 Connect your cell phone to the unit 1 Touch SET of Paired Device List in the Paineet Device Lis Bluetooth SETUP screen Pair Oeien 2 Touch the desired device from the list and touch TEL HFP The selected device is connected to the unit NOTE e Touch Audio A2DP if you want to connect the device as an audio player This key appears only for PIXE PCD e Touch Pandora SPP if you want to connect the Bluetooth device This key appears only for DNX7190HD DNX6990HD and DNX6190HD 3 Download your phonebook 1 Operate the cell phone to send the phonebook data to this unit 2 Operate the cell phone to start the hands free connection NOTE e See the instruction manual of your cell phone for the operation DINDAIA EIDA DINAT IA DINDAIA 5 DYAD ND Con e106 m1 DYABI ND Cors5210 59 PA DIN Dace Bo 0A DIN D601 01010 4 4 Make or receive a phone call See the table below for each operation method a Hands Free Cate Yeates Ga A KENWOOD f i 0426465111 b IR SMS i i r ee HH p Tet seTuP Redial H Phonebook Incoming Calls aE l Preset J E n E BT SETUP l Preset 2
31. ry 6 along the slit and attach it to accessory Si Escutcheon cut out against the center rib as illustrated Use 2 pieces of Attach accessory 8 to the unit accessory for 1 accessory cut out 3 Attach accessory cut out to the unit General Motors cars PISQA 1 Cut out accessory 4 to meet the shape of the opening of the center console 2 Attach accessory to the unit Cut out to meet the shape of the opening in the vehicle DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX Fa GPS antenna a Microphone unit GPS antenna is installed inside of 1 Check the installation position of the car It should be installed as the microphone accessory 4 horizontally as possible to allow easy 2 Remove oil and other dirt from the installation surface 3 Install the microphone 4 Wire the microphone cable up to reception of the GPS satellite signals To mount the GPS antenna inside your vehicle the unit with it secured at several 1 Clean your dashboard or other positions using tape or other surface desired method 2 Peel the backing off of the adhesive on the bottom of the metal plate accessory 40 3 Press the metal plate accessory 0 down firmly on your dashboard or other mounting surface You can bend the metal plate accessory 0 to conform to a curved surface if necessary 4 Place the GPS antenna accessory on top of the metal plate accessory 0 Pe
32. s the inside NOTE Be careful to avoid injury from the catch pins on the removal tool 4 Pull the unit all the way out with your hands being careful not to drop it DID A EO a BYAB NYO 5910 53 PADI ND Coho 210 BYA DI ND Con be 0 mD DINDA DINDA BIND 0101010 5 4 fl Connecting wires to terminals 1 Accessory 4 Accessory Accessory Accessory Accessory 1 Light Green Parking sensor wire For best safety be sure to connect the parking ow sensor Purple White Reverse sensor wire Connect to the vehicle s parking brake detection switch harness Speaker impedance 4 8 Q To front left speaker z HAv ht speak 0 front right speaker gnt sp White Black White Gray Black Gray Green Black REVERSE To rear left speaker Connect to vehicle s reverse Green lamp harness when using the optional rear view camera Purple Black o HA oras To rear right speaker Purple x FM AM antenna input 8 Se Accessory Bluetooth Microphone Pe H Accessory GPS Antenna Quick Start Guide ES Connecting wires to terminals 2 Ignition key switch Car fuse box Main fuse Car fuse box Battery To steering remote To use the steering wheel remote control feature you need an exclusive remote adapter not supplied matched to your car To car light control switch
33. s via the fuse Z CAUTION Install this unit in the console of your vehicle Do not touch the metal part of this unit during and shortly after the use of the unit Metal part such as the heat sink and enclosure become hot NOTES e Mounting and wiring this product requires skills and experience For best safety leave the mounting and wiring work to professionals e Make sure to ground the unit to a negative 12V DC power supply e Do not install the unit in a soot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Do not use your own screws Use only the screws provided If you use the wrong screws you could damage the unit If the power is not turned ON PROTECT is displayed the soeaker wire may have a short circuit or touched the chassis of the vehicle and the protection function may have been activated Therefore the speaker wire should be checked If your car s ignition does not have an ACC position connect the ignition wires to a power source that can be turned on and off with the ignition key If you connect the ignition wire to a power source with a constant voltage supply such as with battery wires the battery may be drained If the console has a lid make sure to install the unit so that the faceplate will not hit the lid when closing and opening If the fuse blows first make sure the wires aren
34. sert it into the slot until it clicks To eject the card Push the card until it clicks and then remove your finger from the card The card pops up so that you can pull it out with your fingers DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX Number Name Motion 7 V Reset e If the unit or the connected unit fails to operate properly the unit returns to factory settings when this button is pressed Instruction Manual P 111 If the SI function is turned on this indicator flashes when the vehicle ignition is off Instruction Manual P 84 2 MENU Displays the Top Menu screen Instruction Manual P 14 e Pressing for 1 second turns the power off e When the power off turns the power on NAV e Displays the navigation screen e Pressing for 1 second switches AV out sources TEL e Displays the Hands Free screen Instruction Manual P 68 4 e North America Sales area Pressing for 1 second stores the tag data of the current music from HD Radio tuner or SiriusXM Instruction Manual P 60 e Central and South America sales area Pressing for 1 second turns off the display Volume Knob Pressing switches attenuation of the volume on off e Turning adjusts volume up or down e Pressing for 1 second displays Tone Control screen Instruction Manual P 99 SCRN e Displays the Screen Control screen Pressing for 1 second displays rear view camera display Remote
35. stop 3 Touch Go 4 Touch Add as Via Point to add this stop before your final destination Taking a detour 1 While navigating a route touch Bay J 2 Touch DADOAK a DYAD DO Ko10 50 6A B D eX 1210 x BYABY ND cM Ro 10 BYAB ND lt oY 4e10 50 AD YD Gow Ko 10 JA BY ND ox 0o10 gt Other Features Manually avoiding traffic on your route DIYA PLX 1 From the map touch the traffic icon 2 Touch Traffic On Route 3 If necessary touch the arrows to view other traffic delays on your route 4 Touch Avoid Viewing the traffic map PLY PLX The traffic map shows color coded traffic flow and delays on nearby About traffic DY DYO NOTICE e Traffic service is not available in some areas or countries Garmin and Kenwood are not responsible for the accuracy or timeliness of the traffic information With an FM traffic receiver the navigation system can receive and use traffic information When a traffic message is received you can see the event on the map and change your route to avoid the incident The FM TMC subscription activates automatically after your navigation system acquires satellite signals while receiving traffic signals from the service provider Go to www garmin com fmtraffic for more information Updating the software To update the navigation system software you must have a USB mass storage device and an internet connection 1 Go to www garmin com Kenwoo
36. t may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help DNX7190HD DNX6990HD DNX6190HD DNX5190 DNX5060EX ACAUTION Use of controls or adjustments or performance of
37. t touching to cause a short circuit then replace the old fuse with one with the same rating e Insulate unconnected wires with vinyl tape or other similar material To prevent a short circuit do not remove the caps on the ends of the unconnected wires or the terminals e Connect the speaker wires correctly to the terminals to which they correspond The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car e When only two speakers are being connected to the system connect the connectors either to both the front output terminals or to both the rear output terminals do not mix front and rear For example if you connect the connector of the left soeaker to a front output terminal do not connect the connector to a rear output terminal After the unit is installed check whether the brake lamps blinkers wipers etc on the car are working properly e Mount the unit so that the mounting angle is 30 or less e This unit has the cooling fan P 27 to decrease the internal temperature Do not mount the unit in a place where the cooling fan of the unit are blocked Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction e Do not press hard on the panel surface when installing the unit to the vehicle Otherwise scars damage or failure may result e Reception may drop if there are metal objects near t
Download Pdf Manuals
Related Search