Admiral AAV-3 Washer User Manual
Contents
1. Cold Cold Brightly colored lightly soiled items washable woolens Start 16 2 g Wrinkle Free SOAK COTTONS Rinse Soak Ong of P Spin Soak Off Siar Extra Rinse off Spin EXTRA RINSE Spin OF Rinse tadeg D Start DELICATES i PULL TO START PUSH TO STOP Control features vary by model Note In wash water temperatures below 60 F 16 C detergents do not dissolve well or clean well Care labels define cold water as up to 85 F 29 C Si 4 Select Options if desired EXTRA RINSE When the knob is in the on position an additional rinse at the end of the COTTONS cycle is provided to more completely remove laundry additives suds perfumes etc END OF CYCLE SIGNAL select models The end of cycle signal will sound once the cycle is completed The end of cycle signal can be canceled by setting the switch to Off Siw 5 Select Cycle To select a cycle push the control dial in off position and turn it to the right clockwise until the pointer is at the number of minutes desired for the wash load IMPORTANT For optimum fabric care the appropriate wash and spin speed for the load type must be selected using the WASH SPIN SPEED knob COTTONS Cycle For regular fabrics select the cycle time and turn the Wash Spin Speed dial to Normal Normal For fabrics needing a slower spin speed to reduce wrinkling set the control dial on Wrinkle Free and turn the wash spin speed dial to Norm2. F 16 C detergents do not dissolve well or clean well Care labels define cold water as up to 85 F 29 C WRINKLE FREE FABRICS of A Spin Rinse PULL TO START PUSH TO STOP CU 3 Select Cycle To select a cycle push the control dial in off position and turn it to the right clockwise until the pointer is at the number of minutes needed for the wash load in the COTTONS Fabrics WRINKLE FREE FABRICS or DELICATES cycles COTTONS Cycle Provides normal agitation and normal spin speeds to wash cottons and heavily soiled items For maximum cleaning set the dial at 14 minutes WRINKLE FREE FABRICS Cycle Provides normal agitation speed and normal spin speed with a spray rinse to protect wrinkle free fabrics DELICATES Cycle Provides slow agitation speed and slow spin speed for delicates and knits 4 Control features vary by model COTTONS Rinse Spin Off 8 Start DELICATES CU 4 Pull Control Dial Out to Start You may stop the washer at any time by simply pushing the control dial in Therefore it is possible to obtain a non agitated soak or to shorten skip or repeat any part of a cycle The control dial must be pushed in off position when you change the setting Note Do not attempt to turn the control dial counterclockwise Damage to the timer will result Mini LOAD SIZE Small Medium Super Normal Slow Hot Cold Reset Normal Slow Cold Cold ADMIRAL
3. from the washer during the spin cycle Unbalanced Spin Load Compensator Your new washer is designed to handle out of balance loads without shutting down or interrupting the washing cycle Ny Care amp Cleaning 1 After washing leave the lid open until the interior is dry 2 Check hoses to be sure there are no kinks or knots 3 Your washer should not be installed where temperatures will go below freezing as damage to the washer could result 4 To clean occasionally wipe exterior with a clean damp sponge or cloth Do not use polish on plastic parts 5 Lifetime lubrication is done at the factory so your washer never needs to be oiled or greased 6 Do not lay heavy or sharp objects on top of your washer 7 The top of the washer should not be used for removing stains from garments Some stain removers such as rust remover will mar the finish 8 Remove pins buckles or other sharp objects from clothes to prevent scratching interior parts 9 Clothes should not be stored in washer 10 Bleach detergent solvents etc spilled on the top of your washer that are allowed to remain will remove the glossy finish Remove all spills with a damp soft cloth For this reason the cycle will always be completed If heavier fabrics in such out of balance loads should ever contain excessive moisture at the completion of the cycle redistribute the clothes in the washer and reset the control dial for the final s
4. D A HEAVY DUTY 10 1 Kg CAPACITY 4 SPEED COMBO QUIET PACK 13 CYCLES Normal Slow Warm Warm Slow Normal Warm Cold WASH SPIN SPEED WASH RINSE TEMP Select LOAD SIZE Determine the selected setting based on load size Selection should provide sufficient water to permit clothes to circulate freely during agitation It may become necessary due to bulky fabrics to adjust the water level after agitation begins To adjust the water level turn the control to Reset and then back to the desired setting WATER LEVEL SETTING LOAD SIZE Mini select models 1 4 Full O sma a_i Super 3 4 Full Note Items must circulate freely for best results Select WASH SPIN SPEED Your washer has selectable wash and spin speed combinations WASH SPIN LOAD TYPE SPEEDS Sturdy fabrics needing maximum Normal Normal water extraction Sturdy fabrics needing a slower spin speed because of wrinkling Slow Normal Heavy loads of delicate fabrics needing a fast spin for better water extraction Slow Slow Delicate fabrics needing slower wash and spin speed because of clothing construction Select WASH RINSE TEMP Your washer gives you a choice of hot warm or cold water for washing and cold or warm water for rinsing Use the chart below as a guide WASH RINSE LOAD TYPE TEMPS White and heavily soiled color fast Warm Warm Moderately soiled colored items Warm Cold Moderately soiled colored items most wrinkle free items
5. NN W h o Use amp Care Guide Admiral Table of Contents Important Safety Instructions 1 2 Yi Care amp Cleaning 11 a Using the Controls Troubleshooting 12 2 Speed Combo Models 3 4 pP 3 Speed Combo Models 5 6 e ar 4 Speed Combo Models 7 8 Guide d utilisation et d entretien 14 Operating Tips 9 Gu a de uso y cuidado 28 IS Special Features 10 11 A Form No A 07 05 Part No 2205438 Litho U S A 2005 Maytag Appliances Sales Co Installer Please leave this guide with this appliance Consumer Please read and keep this guide for future reference Keep sales receipt and or canceled check as proof of purchase Have complete model and serial number identification of your appliance This is located on the back center of the control panel Record these numbers below for easy access Model Number Serial Number Date of Purchase In our continuing effort to improve the quality and performance of our appliances it may be necessary to make changes to the appliance without revising this guide Note When writing or calling about a service problem please include the following information a Your name address and telephone number b Model number and serial number c Name and address of your dealer or engineer d A clear description of the problem you are having e Proof of purchase sales receipt W
6. accumulation of combustible materials such as lint paper rags gasoline and all other flammable vapors and liquids HYDROGEN GAS IS EXPLOSIVE Under certain conditions hydrogen gas may be produced in a hot water system that has not been used for two weeks or more If the hot water system has not been used for such a period before using the washer turn on all the hot water faucets and let the water flow from each faucet for several minutes This will release any accumulated hydrogen gas As this gas is flammable do not smoke or use an open flame during this time Recent studies have shown that if vegetable oil contaminated materials are incompletely washed a carry over and buildup of the oil may contribute to a chemical reaction spontaneous combustion that could cause a load to catch fire by itself This would be more likely to happen if the load were left in the dryer after tumbling stopped or if items were folded and stacked while warm A WARNING WARNING Hazards or unsafe practices which COULD result in severe personal injury or death A CAUTION CAUTION Hazards or unsafe practices which COULD result in minor personal injury FIN Important Safety Instructions 44 WARNING To reduce the risk of fire explosion electric shock or personal injury when using your washer follow basic safety precautions including the following 1 Read all instructions before using the appliance 2 As with any equipment u
7. al Slow DELICATES Cycle This cycle provides up to 12 minutes of agitation Depending on the load select either the Slow Slow or Slow Normal wash spin speed SOAK Cycle This cycle provides approximately 30 minutes of agitation and soaking to help remove stubborn dirt and stains For more information see page 10 Sia 6 Pull Control Dial Out to Start You may stop the washer at any time by simply pushing the control dial in Therefore it is possible to obtain a non agitated soak or to shorten skip or repeat any part of a cycle The control dial must be pushed in off position when you change the setting Note Do not attempt to turn the control dial counterclockwise Damage to the timer will result y Operating Tips Detergent Use either liquid or granular laundry detergent For best results be sure detergent is added to the washer BEFORE the load and be sure the wash water is above 60 F 16 C Use the correct amount of detergent for the load size soil level and water conditions Use more detergent if you have hard water and very soiled loads If you have soft water or a lightly soiled load use less detergent See manufacturer s instructions Wipe up any detergent spills on the washer Loading For best results add the detergent to the washtub before adding the load Put dry unfolded clothes loosely in the tub up to the top row of holes for a maximum load Do not wrap large items like
8. hat You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur Common sense caution and care must be exercised when installing maintaining or operating appliance Always contact the manufacturer about problems or conditions you do not understand Recognize Safety Symbols Words Labels Important Safety Instructions Do not add gasoline dry cleaning solvents or other flammable or explosive substances to the wash water These substances give off vapors that could ignite or explode Do not wash articles which have been previously cleaned washed soaked or spotted with gasoline dry cleaning solvents oil waxes chemical solvents alcohol turpentine or other flammable or explosive materials These substances will be retained in articles and articles which still contain these flammable or explosive substances give off vapors that could ignite or explode Observe these precautions when using cleaning fluids spot or stain removers etc These products should be labeled nonflammable Use according to manufacturers directions in a well ventilated area or outdoors Thoroughly rinse articles by hand before placing them in the washer Some of these products rust removers for example will damage components and the finish of the washer Keep area around and underneath washer free from the
9. htened before the washer is operated Keep all laundry aids such as detergents bleach etc out of the reach of children preferably in a locked cabinet Use laundry aids only as directed by the manufacturer Observe all warnings on container labels Keep the area around and underneath washer free from the accumulation of combustible materials such as lint paper rags gasoline and all other flammable vapors and liquids Do not use chlorine bleach and ammonia or acids such as vinegar or rust remover in the same wash Hazardous fumes can form Do not machine wash fiberglass materials Small particles can stick to fabrics washed in following loads and cause skin irritation For flame resistant finishes follow garment manufacturer s instructions carefully Improper laundering could remove the finish Before the appliance is removed from service or discarded remove the door to the washing compartment Inlet hoses are subject to damage and deterioration over time Check the hoses periodically for bulges kinks cuts wear or leaks and replace them every five years SAVE THESE INSTRUCTIONS ADMIRAL HEAVY DUTY SUPER CAPACITY PLUS 2 SPEED COMBO Medium Mini Super Reset LOAD SIZE Select LOAD SIZE Select Cycle and Water Determine the selected setting based on load size Temperature Selection should provide sufficient water to permit f ane To select a cycle and water temperature push the clothes to ci
10. itated soak or to shorten skip or 2 repeat any part of a cycle The control dial must be pushed in off position when you change the setting WRINKLE Ie Warm Cold 8 4 FREE Note Do not attempt to turn the control dial counterclockwise Damage to the timer will result FABRI sel ee Sal Cold Cold hed Warm Cold Cold Cold ADMIRALD A Medium Mini Super Reset LOAD SIZE Select LOAD SIZE Determine the selected setting based on clothes load size Selection should provide sufficient water to permit clothes to circulate freely during agitation lt may become necessary due to bulky fabrics to adjust the water level after agitation begins To adjust the water level turn the control to reset and then back to the desired setting WATER LEVEL SETTING LOAD SIZE Mini select models 1 4 Full Note Items must circulate freely for best results 75 Using the Controls 3 Speed Combo Models HEAVY DUTY 10 1 Kg CAPACITY 3 SPEED COMBO 8 CYCLES Warm Hot Cold Cold Cold Cold WASH RINSE TEMP Select WASH RINSE TEMP Your washer gives you a choice of hot warm or cold water for washing and cold water for rinsing Use the chart below as a guide WASH RINSE LOAD TYPE TEMPS White and heavily soiled color fast Warm Cold Moderately soiled colored items most wrinkle free items Cold Cold Brightly colored lightly soiled items washable woolens Note In wash water temperatures below 60
11. liminates the inconvenience of soaking stained loads before they are placed in the washer To use follow these steps 1 Add liquid or granular detergent to the washtub 2 Add the load 3 Add liquid detergent only to the Liquid Dispenser in the top of the agitator 4 Set the control dial to Start in the SOAK Cycle The load will soak for 30 minutes with brief periods of agitation The water is then spun out and clean wash water is added along with the liquid detergent for a 16 minute wash cycle Safety Spin If for any reason you open the washer lid when the washer is in a spin or extract period the operation will immediately stop This is for your personal safety If your washer does not stop call your service technician immediately When the lid is closed the operation will automatically resume Finger Faucet select models Provides a flow of water when holding the switch in the On position Finger Faucet On Off 10 Special Features Automatic Lint Filtering System The Lint Filtering System does not require cleaning Wash and rinse water is filtered and re filtered continuously to trap lint shed by most fabrics during the agitation cycle before it can be redeposited on the wash load The engineered hole design on the wash basket in conjunction with water flow produced by the agitator traps lint away from the clothes between the inner wash basket and the outer tub Lint is automatically flushed
12. penser before adding the load Avoid splashing or over filling the dispenser Notes e Never pour undiluted liquid chlorine bleach directly onto the load or into the wash tub It is a powerful chemical and can cause fabric damage such as tearing or color loss if not used properly e If you prefer to use color safe non chlorine bleach pour it into the wash tub with your detergent Do not pour non chlorine bleaches into the bleach dispenser Liquid Dispenser select models The dispenser may be used for fabric softener with most cycles or liquid detergent with the SOAK cycle select models The liquid dispenser should be cleaned before and after each use of liquid detergent The dispenser automatically releases the liquid at the proper time during the cycle To use follow these steps 1 Pour a measured amount of desired liquid into the dispenser to fill line only 2 If liquid comes below line add warm water If it is necessary to clean the dispenser 1 Pull the dispenser off of the top of the agitator 2 Soak for one hour in sink or container in hot water and dishwashing liquid 3 Hold hands over top and bottom of dispenser and shake to loosen buildup oe 4 Rinse with clean hot water ps NM 5 Repeat process if necessary A VV OF AA 6 Replace dispenser on agitator e Do not use dishwashing liquid inside the washer Oversudsing can occur SOAK Cycle select models This cycle e
13. pin period Overload Protector A built in protector automatically shuts off the washer motor in case of an overload This can occur if e The load being washed is too heavy e Too many appliances are plugged into the line operating your washer e A low voltage condition exists on the line e Lid is opened and closed repeatedly The overload protector permits the washer to start again when the motor has cooled to a safe operating temperature If the motor stops repeatedly call your service technician 11 If you close your home for the winter have a service technician drain the washer Unplug cord from electrical outlet and disconnect hoses from faucets Cleaning the Interior Clean the interior of the washer periodically to remove any dirt soil odor mold mildew or bacteria residue that may remain in the washer as a result of washing clothes We recommend taking the following steps every 60 to 120 days to clean and freshen your washer interior The frequency with which the washer should be cleaned and freshened depends on factors such as usage the amount of dirt soil or bacteria being run through your washer or the use of cold water Failure to follow these instructions may result in unsatisfactory conditions including unpleasant odor and or permanent stains on the washer or wash load To clean and freshen the washer interior 1 Add a measured amount of chlorine bleach to the bleach dispenser following package di
14. rculate freely during agitation control dial in off position and turn it to the right It may become necessary due to bulky fabrics to clockwise until the pointer is at the number of adjust the water level after agitation begins To adjust minutes and water temperature needed for the wash the water level turn the control to Reset and then load in the COTTONS WRINKLE FREE FABRICS or back to the desired setting DELICATES cycles All rinses use cold water WATER LEVEL SETTING LOAD SIZE COTTONS Cycle a Used to wash Cottons and heavily soiled items Mini select models 1 4 Full WRINKLE FREE FABRICS Cycle ASA Used to minimize wrinkles with a cool down spray 3 4 Full rinse following the wash DELICATES Cycle Note Items must circulate freely for best results Used for items requiring delicate wash action The washer will fill then agitate and soak alternately Note In wash water temperatures below 60 F 16 C detergents do not dissolve well or clean well Care labels define cold water as up to 85 F 29 C Control features vary by model Hot Off 14 10 6 Warm COTTONS Spin Rinse Rinse Spin Cold 8 N A Warm 12 Off WRINKLE FREE FABRICS Off 2 6 arm Spin Rinse Cold DELICATES PULL TO START PUSH TO STOP sre gt HEZ Pull Control Dial Out to Start Hot Cold l 10 You may stop the washer at any time by simply COTTONS pushing the control dial in Therefore it is possible to m LE obtain a non ag
15. rections 2 Add 1 4 cup of detergent to the tub 3 Run the washer without a load through a complete cycle using hot water 4 Repeat the process if necessary Troubleshooting Won t Spin or Drain Fills with the Wrong Temperature Water Cycle Selector Advances Through Off Plug cord into live electrical outlet Check fuse or reset circuit breaker Turn the control dial to proper cycle and restart the washer Turn both faucets on fully Straighten inlet hoses Disconnect hoses and clean screens Hose filter screens may be plugged Check fuse or reset circuit breaker Make sure the lid is completely closed Turn the control dial to proper cycle and restart the washer Pauses are normal Wait and see if the washer will start again Check fuse or reset circuit breaker Straighten drain hoses Eliminate kinked hoses If there is a home drain restriction call for drain service Close lid and restart the washer For your safety washer will not spin unless the lid is closed Suds lock caused by too much suds Rewash without detergent Use correct amount of a low sudsing detergent Unevenly distributed load Redistribute the load close the lid and restart the washer Check for leveling Be sure water level is acceptable for load size A normal spin speed is recommended for heavy loads like jeans or towels Plug cord into live electrical outlet Check fuse or reset circuit breaker Close lid and restart
16. sheets around the agitator Mix large and small items for best circulation Wash bulky items like blankets separately When laundering wrinkle free items or items of delicate construction washable woolens or loosely knit items never use less than the Medium water level setting This will minimize shrinkage wrinkling and pulling of seams Close lid carefully to avoid slamming Additional Tips During the spin it is possible for the load to become unevenly distributed in the tub If this happens push in the control dial open the lid redistribute the load close the lid and restart the washer The spin will resume at the point it was interrupted The washer will pause briefly throughout each cycle These pauses are normal This washer is designed so that it will not agitate or spin when the lid is open It will however fill with the lid open so water is available for pretreating stains or diluting fabric softener If you open the lid during a spin cycle the washer will stop When the lid is closed and the washer is restarted the washer will continue the cycle at the point it was interrupted Special Features Liquid Bleach Dispenser The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load To use follow these steps 1 Measure liquid chlorine bleach carefully following the instructions on the bottle 2 Pour liquid chlorine bleach into bleach dis
17. sing electricity and having moving parts there are potential hazards To use this appliance safely the operator should become familiar with the instructions for operation of the appliance and always exercise care when using it 3 Do not install or store this appliance where it will be exposed to the weather 4 Install and level washer on a floor that can support the weight 5 This appliance must be properly grounded Never plug the appliance cord into a receptacle which is not grounded adequately and in accordance with local and national codes See installation instructions for grounding this appliance 6 To avoid the possibility of fire or explosion a Do not wash items that have been previously cleaned in washed in soaked in or spotted with gasoline dry cleaning solvents other flammable or explosive substances as they give off vapors that could ignite or explode Hand wash and line dry any items containing these substances Any material on which you have used a cleaning solvent or which is saturated with flammable liquids or solids should not be placed in the washer until all traces of these liquids or solids and their fumes have been removed These items include acetone denatured alcohol gasoline kerosene some liquid household cleaners some spot removers turpentine waxes and wax removers b Do not add gasoline dry cleaning solvents or other flammable or explosive substances to the wash water These sub
18. stances give off vapors that could ignite or explode c Under certain conditions hydrogen gas may be produced in a hot water system that has not been used for two weeks or more HYDROGEN GAS IS EXPLOSIVE If the hot water system has not been used for such a period before using a washer or combination washer dryer turn on all hot water faucets and let the water flow from each for several minutes This will release any accumulated hydrogen gas As the gas is flammable do not smoke or use an open flame during this time d Do not wash or dry items that are soiled with vegetable or cooking oil These items may contain some oil after laundering Due to the remaining oil the fabric may smoke or catch fire by itself Do not reach into the appliance if the tub or agitator is moving Do not allow children or pets to play on in or in front of the appliance Close supervision is necessary when the appliance is used near children and pets Do not tamper with controls Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in published user repair instructions that you understand and have the skills to carry out Unplug power supply cord before attempting to service your washer Service is to be done only by qualified service personnel The agitator should not be removed If the agitator is removed it must be replaced by pushing down completely and the locking screw tig
19. the washer For your safety washer will not agitate or spin unless lid is closed This may be a pause in the cycle Wait briefly and it may start Make sure hose connections are tight Make sure end of drain hose is correctly inserted and secured to drain facility Avoid extended soaking soak for 30 minutes or less Avoid overloading Be sure washer is leveled properly as outlined in installation manual Weak floors can cause vibration and walking Operating sounds will vary depending on agitation speed Turn both faucets on fully If equipped with a temperature selector dial be sure it is set directly on a temperature setting and not between settings Make sure temperature selection is correct Make sure hoses are connected to correct faucets and inlet connections Be sure water supply is regulated correctly Flush water line before filling washer Check the water heater It should be set to deliver a minimum 120 F 49 C hot water at the tap Also check water heater capacity and recovery rate Disconnect hoses and clean screens Hose filter screens may be plugged EXTRA RINSE select models is selected 12
Download Pdf Manuals
Related Search