Home

model 3100【180kb】

1. ORDERING INFORMATION PIPETTE DISPOSABLE TIP Cat No Volume Range Cat No Capacity Q ty Bag 00 31N 1000 0 2 1 0mL 00 MPT 1 0 2 1 0mL 1000 00 31N 2000 0 4 2 0mL 00 MPT 2 0 4 2 0mL 200 00 31N 5000 1 0 5 0mL 00 BMT2 X 1 0 5 0mL 200 00 31N 10000 2 0 10 0mL 00 BMT2 Z 2 0 10 0mL 200 Model 3100 is provided with accessories as follows One Piston Installing Tool One grease Tip s O0 31N 1000 with 2pcs 00 MPT 1 00 31N 2000 with 2pcs 00 MPT 2 00 31N 5000 with 1pc 00 BMT2 X 00 31N 10000 with 1pc 00 BMT2 Z An operation manual For repair service or further information you may contact your local distributor MANUFACTURER gt a Pe FUTURE LIFESCIENCE PARTNER NICHIRYO 2014 Ver 1 MODEL 3100 MACRO PIPETTE CERTIFIED ISO9001 e Thank you very much for purchasing MODEL 3100 e Please read this manual carefully before using Always Pursuing Originality cle n ICHIRYO FEATURES e Excellent accuracy and precision Four different volume ranges 1mL 2mL 5mL and 10mL e Volume of pipetting is easily changed and fixed e Light design permits easy handling without fatigue SPECIFICATIONS Accuracy 1 0 Reproducibility Precision lt 1 0 Cat No Volume Range Increments 00 31N 1000 0 2 1 0mL 0 1mL 00 31N 2000 0 4 2 0mL 0 1mL 00 31N 5000 1 0 5 0mL 0 5mL 00 31N 10000 2 0 10 0mL 0 5mL OPERATING PROCEDURES 1 Loosen the
2. d push a pin by the probe of the piston installing tool To install the piston push the pin by opposite side of the tool Fig 4 Note The piston should be lubricated with a small amount of silicone grease provided after certain interval or after cleaning of the piston when contaminated Fig 3 Q90 Fig 2 PARTS AND MATERIALS Push Button Polypropylene Shaft Stainless Steel Lock Nut Alumite plated Aluminium Volume Scale Pol ymethy pentene Body Polypropylene Syringe Connector Polypropylene Piston Fluoroplastic Syringe Polypropylene Disposable Tip Polypropylene et Syr inge Connector Syr inge Syr inge Nozzle Syringe Connector Plunger Pin Piston Installing Tool to remove aC to instal Piston Fig 4
3. lock nut and turn the push button until the yellow cross line corresponds to the desired volume indicated by the volume scale then lock by tightening the lock nut 2 Attach a disposable tip firmly onto the syringe nozzle 3 Depress thepush button several times to ensure smooth movement of the piston Push the push button to the first stop Fig 1 B 4 Place the disposable tip into liquid to a depth of 3 to 4mm 5 Slowly return the push button to its original up position Fig 1 A The sample will be drawn into the tip The push button should be carefully released so not to flush the liquid into the tip of the pipette especially for SmL and 10mL model 6 Touch the tip to the inside wall of the receiving vessel 7 Press the push button again to the first stop to dispense most of the liquid Wait one second with the push button Held in this position then continue to push the push button to its limit Fig 1 C This forces out the last remaining liquid from the tip Keep the knob fully depressed until the tip is removed from the receiving vessel Remove used tip from the pipette A Ee Fig 1 REPLACEMENT OF PARTS 1 PUSH BUTTON It is easily removed by pulling it off the push button 2 SYRINGE Turn it counterclockwise to remove from the syringe connector Fig 3 3 PISTON After removal of the syringe keep the push button fully depressed an

model 3100【180kb】

Contents

Download Pdf Manuals

Related Search

Related Contents