User Manual - Pro Light Japan
Contents
1. Thanks for purchasing NITECORE2. EL Z Output amp Runtime FL1 STANDARD TURBO HIGH MID Ko Ua Ke NOTICE Ad 2150 1100 400 80 2 The stated data has been e LUMENS LUMENS LUMENS LUMENS LUMENS measured in accordance with the international ANSI NEMA FL1 using 2 x Nitecore 18650 Li ion batteries 3 7V 2600mAh or 4 x Nitecore CR123 fa 280m Beam Distance batteries 3V 1700mAh under laboratory conditions The data may 19600cd Peak Beam Intensity vary in real world use due 7 to different battery usage 1 5m Impact Resistant or environmental es conditions AARAA y IPX 8 2m Waterproof AND Submersible Operating Instructions Battery installation As illustrated rotate the thumbscrew lock counterclockwise and screw the tail cap off Insert batteries with the negative ends contacting the springs and then tighten the thumbscrew lock clockwise NOTE After battery insertion the power indicator light will blink to indicate remaining battery power Please refer to the Power Tips section of this manual for details gt WARNING y 1 Do not mix rechargeable and non rechargeable batteries 2 Do not mix batteries of different types brands On Off Operation To switch on Press the on off switch to turn the light on To switch off Press the on off switch again to turn the light off and enter standby mode Standby Mode With the light turned on press and hold the on off switch for over one second to turn the ligh
3. NITECORE The All Round Flashlight Expert Features e Solid lightweight aero grade aluminum alloy construction gt Utilizes a CREE XHP50 LED e Maximum output up to 2150 lumens e Dual switch design offers unprecedented ease of use Thumbscrew lock on tailcap doubles as a tripod receiver 5 brightness levels and 3 special modes available e High efficiency constant current circuit enables maximum runtime up to 325 hours e Features advanced temperature regulation ATR technology A power indicator built into the on off switch indicates remaining battery power Chiese Patent ZL201220057767 4 e Direct access to ultralow and turbo outputs e Amicro textured reflector offers wide angle lighting e Reverse polarity protection prevents damage arise from incorrectly inserted batteries Stainless steel retaining ring protects core components from damage Toughened ultra clear mineral glass with anti reflective coating e Waterproof in accordance with IPX 8 2 meters submersible e Impact resistant to 1 5 meters e Tail stand capability Dimensions Length 5 90 150mm Head diameter 1 57 40mm Tube 1 54 x 1 10 39mmx28mm Weight 6 030z 171gram without battery Accessories Quality holster lanyard Battery Options TYPE Nominal voltage Compatible 18650 Rechargeable Li ion battery Y Recommended Primary Lithium battery Y Recommended Rechargeable Li ion battery RCR123 atv ECSLUIXHHOSI
4. e second to switch the light off and enter lockout mode In this mode the two switches will not have their respective functions thus preventing accidental activation To unlock press and hold both switches for over one second again NOTE 1 When in lockout mode the EC4S will remain operational using 2x18650 batteries for over 12 months 2 When the EC4S is kept in a backpack or left unused for extended periods Nitecore recommends batteries are removed to cut off power entirely and thus prevent battery leakage or accidental activation Power Tips After battery installation or with the mode switch Ej being pressed when the light is off the blue power indicator built into the switch will blink to indicate remaining battery power The power indicator will blink three times when power levels are above 50 twice when power levels are below 50 and once when battery is close to depletion ATR Technology Advanced temperature regulation ATR technology allows the EC4S to dynamically adjust output performance according to its internal temperature This prevents damage from overheating and prolongs its working life Changing Charging Battery Batteries should be replaced or recharged when output appears to be dim or the flashlight becomes unresponsive Maintenance Every 6 months threads should be wiped with a clean cloth followed by a thin coating of silicon based lubricant Warra
5. nty Service All NITECORE products are warranted for quality Any defective malfunctioning NITECORE product can be repaired free of charge for a period of 60 months 5 years from the date of purchase Beyond 60 months 5 years a limited warranty applies covering the cost of labor and maintenance but not the cost of accessories or replacement parts The warranty is nullified in all of the following situations 1 The product s is are broken down reconstructed and or modified by unauthorized parties 2 The product s is are damaged through improper use 3 The product s is are damaged by leakage of batteries For the latest information on NITECORE products and services please contact a local NITECORE distributor or send an email to service nitecore com All images text and statements specified herein this user manual are for reference purpose only Should any discrepancy occurs between this manual and information specified on www nitecore com information on our official website shall prevail Sysmax Industry Co Ltd reserves the rights to interpret and amend the content of this document at any time without prior notice SYSMAX ina J gi Please find us on facebook L __NITECORE Flashlights 4 SYSMAX Industry Co Ltd TT TTT TEL 86 20 83862000 FAX 86 20 83882723 E mail info nitecore com Web www nitecore com et az 20150921 Address Rm1401 03 Glorious Tower 850 East Dongfeng Road Guangzhou China 510600
6. t off and activate the power indicator to blink once every three seconds thus helping users locate the EC4S in dark environments When powered by 2x18650 batteries the EC4S can operate for over 6 months with the power indicator on or remain on standby for over 12 months with the power indicator off GG EL4S User Manual Brightness Levels With the light turned on press the mode switch 8 repeatedly to cycle through brightness levels of ultralow low medium high and turbo This mode has memory effect that ensures direct access to the brightness level last used Direct Access to Ultralow Turbo With the light turned off press and hold the on off switch for over one second to enter ultralow level 2 lumens With the light turned off press and hold the mode switch E for over one second to enter turbo level 2150 lumens Special Modes Strobe Location Beacon SOS With the light turned on press and hold the mode switch Ej for over one second to enter strobe mode To cycle through location beacon SOS strobe modes press and hold the mode switch gs for over one second again To exit press the on off switch to turn the light off Strobe Ready With the light turned off press the mode switch EJ twice in quick succession to enter strobe mode directly To exit simply press any switch to turn the light off Lockout Unlock With the light turned on press and hold both switches for over on
Download Pdf Manuals
Related Search