Hikvision Network Mobile DVR Secures Armored Truck of China
Contents
1. this option is only available if the camera has a microphone connected to it or only the analog channels 1 4 on the hybrid NVR Video Stream allows changing the recording stream between Main Stream and Sub Stream this step requires a restart Please refer to the table below for recommended recording parameters stoeto aVER ecm suares ater Sear a s O O renmen mana a OO O n a TE O eaa a a OO ana Ta e a OO eanne meaa a OO omano me TE O a ena ea s O a M a Te www hikvision com en us K VISION Ee Last step in the recording setup Is setting up the Sub Stream The Sub Stream is used for streaming on mobile devices as well as displaying multiple cameras on the local output Select Sub Stream Main Stream Record Capture Record 7 PREET z La 352 240 CIF D Quality ariable v B12 a4 M Unlike Main Stream Select Sub Stream can only go up to 4CIF Camera Please note If the upload speed is not sufficient consider lowering the frame rate bitrate resolution for more fluent mobile app viewing www hikvision com en us HIK VISION CO 9 CONFIGURING THE MOBILE APP All HikVision DVRs NVRs and IP Cameras can be accessed with iVMS 4500 application The APP can be downloaded from the APP STORE iPhone iPad PLAYSTORE Android The app is also available for WINDOWS MOBILE devices Nokia Phones and tablets Download the app from the appropriate place and launch it When the APP is launched for the fir2. DDNS registration has been made more user friendly and takes only a few seconds to complete The legacy units require user registration on www hik online com This step is no longer needed Click on the DDNS tab er General mail SNMP More Settings In the DDNS tab a Enable DDNS b Change the DDNS TYPE to HiDDNS in some cases HKDDNS c Make sure that the SERVER ADDRESS is set to www hik online com d Create a DEVICE DOMAIN NAME the domain name CANNOT contain spaces special characters and or upper case letters www hikvision com en us K VISION Email SNMP NAT More Settings Enable DDNS Z v bre Auto Detect _ 7 After the changes have been made presses APPLY Status will be changed to Register success Enable DDNS IDDNS Auto Detect hik online com hik isionusal11 Register success lf the Domain Name does not meet the acceptable criteria and or is already registered an error message will appear www hikvision com en us VISION If you have a DS 7716NI SP 16 please skip to 7 RECORDING SETUP Go to MENU gt CAMERAS SETUP aa Analog PERT P Camera Import Export 192 168 1 0 IPCamera 02 HIKVISION 10 9 6 34 IPCamera 03 HIKVISION 10 9 6 40 DS 2CD726 HIKVISION DS 2CD 264FW 10 9 6 2 Camera 01 HIKVISION 10 963 Camera 01 HIKVISION A gila ON DS 2CD4 192 0 0 64 HIKVISION DS 2CD2632F I 192 0 0 198 HIKVISION DS 2CD8254FW 10 9 6
3. 1 MENU gt RECORDING CONFIGURATION 2 Click on the EVENT under the calendar yellow After this the mouse cursor will change to a WAND 3 Select the calendar and it will turn YELLOW just like on a computer click on the top left corner of the calendar and drag to the bottom right corner 4 Press APPLY Capture _ Camera IP Camera1 Enable Schedule T Continuous 00 00 00 00 h Add ea sn Re final Ba as ae ela a Fees est eral 00 00 24 00 af ees Pa eal eo sao fest tien pes et AE 00 00 24 00 po rd a a eset re 00 00 24 00 tt a EB tC A E E E 00 00 24 00 BB RP Be NE E LR BR a mo Ed an RE a ete Wa a E ATT ET FS A REEE a we a i ma i ie Ka nr 00 00 24 00 nn nn 4 NN ep amp amp amp amp amp amp www hikvision com en us sP Gt amp amp amp amp 5 3 After the recording has been set to EVENT RECORDING go to MOTION DETECT to set the motion detection for every camera In this step the COPY option is available only for analog cameras the IP cameras need to be configured individually a Camera Motion Detection Setup gt ec a Motion Sensitivity The amount of bright green squares indicates the sensitivity level in this picture the sensitivity is set to 3 Sami m ee EEE mn e p Motion Area The grid indicates the area where motion will be detected www hikvision com en us K VISION Es To set the rec
4. 43 HIKVISION DS 2CD2232 15 8000 Press the GARBAGE CAN icon to delete an added camera Press EDIT to change the Press to add the camera s IP address camera to the NVR The camera s IP has to be in the same range as LAN2 Please refer to REFRESH List of detected the manual for to find cameras cameras YELLOW detailed connected to the TERE information network al cameras WHITE Please note To change the CAMERA NAME go to OSD www hikvision com en us VISION CO HikVision DVRs NVBs are defaulted to CONTINUOUS RECORDING Please go to MENU gt RECORDING CONFIGURATION X a gt z a y XG Ge 8 p Capture Camera P Camera 1 M Enable Schedule EJ 00 00 00 00 L 00 00 24 00 00 00 24 00 00 00 24 00 00 00 24 00 00 00 24 00 00 00 24 00 00 00 24 00 nn nn 24 nn amp amp amp amp ep amp s The color of the calendar is what This field is used to constitutes the recording schedule customize a part of the 1 Blue Continuous existing schedule 2 Yellow Event Motion Alarm This can be ignored if 3 Green POS Point of sales setting up motion only oP Aen See 4 Grey No Recording recording Continuous Motion Select the camera e Please note If ENABLE SCHEDULE is not Enable Disable the schedule checked then that camera would not be recording www hikvision com en us VISION CC To set the DVR NVR to MOTION RECORDING go to
5. HIK VISION a Quick Start Guide Hybrid DVR DS 90xxHFI ST DS 90xxHWI ST NVR DS 96xxNI ST RT Plug n Play NVR DS 77xxNI SP Note For more information refer to the complete User Manual located on the CD ROM www hikvision com en us HIKVISION A OVERVIEW Overview Device Activation Main Menu Layout Formatting the HDD Date and Time Setup Setting up The Network Adding IP Cameras Non POE Models Setting Up Recording Configuring the Mobile APP Playing Back Recorded Video 2 3 4 5 6 M 8 9 meek Making a Backup Please connect a monitor and a USB mouse supplied to the DVR NVR for configuration purposes www hikvision com en us HIK VISION THE BOX CONTAINS ar a fy Pe a LEG IR Remote Hard Drive Mountin BM 3 g Hybrid DVR NVR USB Mouse Batteries not included Power eard Screws and Brackets I lt Hard Drive Hard Drive Cables Rack Mount Ears Quick Start Manual Software CD Preinstalled Guide Please note that the Quick Start Guide is compiled for the latest firmware versions Please upgrade the firmware of the DVR NVR to the latest version before proceeding Also note that the CD may contain outdated manuals and software For latest firmware manual and software downloads please visit www hikvision com en us download asp www hikvision com en us HIK VISI O R DS 9016HFI ST DS 9016HWI ST 1 REAR VIEW FRON
6. ON Password length is fewer than eight characters contains only one type of character is the same as the user name and or is the mirror writing of the user name This type of password will not be accepted Password contains two kinds of characters The combination is number lowercase letter or number uppercase letter and the password length is at least eight characters This type of password willbe accepted Password contains two types of characters The combination is neither number lowercase letter nor number uppercase letter and the password length is at least eight characters This type of password will be accepted Password contains more than three types of characters and the password length is at least eight characters This type of password willbe accepted Types of characters are lowercase letters uppercase letters numbers and special characters Only ASCII characters are allowed www hikvision com en us VISION 0 DEFAULT USERNAME Please note that the username and password are case sensitive View recorded video and make Backup Search for snapshots make large backups Search for VCA event Setup recording type motion detection resolution and frame rate and more Add cameras Change brightness contrast Camera name PTZ Privacy Setup Date Time mask network screen settings user accounts and more Upgrade firmware Model number fa
7. Settings The MORE SETTINGS tab contains the ports that need to be forwarded for remote access Tw J 7 pe General DDNS Email SNMP NAT Alarm Host The SERVER PORT is responsible for the MOBILE APP and CLIENT SOFTWARE log in The HTTP PORT is responsible for WEB BROWSER log in The RTSP PORT is responsible for VIDEO AUDIO STREAMING www hikvision com en us Units with older firmware have the RTSP PORT set to 554 A lot of cell phone carriers block incoming data through port 554 which is why HikVision recommends changing that port to 10554 The HTTP PORT and the SERVER PORT can be changed if desired in order to avoid conflicts with the ISP or the existing network configuration PORT FORWARDING After assigning the IP information to the DVR NVR connect a computer to the same router that the DVR NVR is connected to wired connection is recommended to avoid complications Log into the ROUTER and proceed with PORT FORWARDING For PORT FORWARDING assistance contact the Internet Service Provider ISP or the router manufacturer Also refer to www portforward com for port forwarding step by step instructions Please be aware that HikVision USA is not associated with www portforward com and not responsible for any activity between the user and www portforward com Please refrain from downloading any software from the abovementioned website Proceed to the ROUTERS section for step by step instructions DDNS SETUP
8. T VIEW 1 Analog Camera Inputs 1 Front Panel Release to expose 2 Spot Monitor Outputs x4 HDDs 3 BNC Monitor Output x1 2 Aloha Numerical Buttons 1 16 4 Audio Out for BNC and VGA 3 IR Receiver 5 Line Input for 2 way audio 4 DVD RW Drive Optional 6 RS 232 5 DVD RW Eject Button 7 VGA Monitor Output x1 6 USB Ports x2 8 HDMI Monitor Output x1 7 Control Buttons 9 e SATA Port 8 Directional and Enter Buttons 10 RJ 45 Network Ports x2 9 Jog Control 11 RESERVED 10 Front Panel Lock 12 Alarm In Out RS 485 Pins 11 Power Button 13 Grounding Post 14 Power Plug 15 Power Switch 16 Additional Audio Inputs for channels 5 www hikvision com en us HIK VISION E ee DS 7716NI SP 16 REAR VIEW Built in POE Ports x16 e SATA Port RS 232 BNC Monitor Output VGA Monitor Output RESERVED Alarm In Out RS 485 Pins Power Plug Power Switch 10 Audio Out for BNC 11 Audio Out for VGA 12 HDMI Monitor Output 13 USB Port x1 14 RJ 45 Network Port 15 Line Input for 2 way audio 16 Grounding Post OT a eo ea eS FRONT VIEW USB Ports x2 DVD RW Drive Optional DVD RW Eject Button Directional and Enter Buttons IR Receiver Control Buttons Jog Control Power Button www hikvision com en us HIK VISION as re MM DS 96xxNI ST RT REAR VIEW FRONT VIEW 1 Spot Monitor Outputs x4 1 Front Panel Release to expose HDDs 2 RS 232 2 IR Receiver 3 VGA Monito
9. VR NVR and not used to connect to IP cameras For DVRs NVRs with 32 channels or less set the Working Mode to MULTI ADDRESS For this to take effect please restart the DVR NVR On the back of the DVR NVR there are 2 LAN ports The bottom port is LAN1 the top port is LAN2 Connect LAN1 to the Router for remote access and connect LAN2 to the POE switch with the cameras Step 1 Set the Default Route to LAN1 Step 2 From the SELECT NIC dropdown select LAN1 Step 3 Enable DHCP check the checkbox Press APPLY and then press REFRESH Step 4 After pressing refresh the IPv4 Address IPv4 Subnet Mask and IPv4 Default Gateway will have new values Step 5 Disable DHCP uncheck the checkbox www hikvision com en us VISION Ee SELECT NIC Toggle between LAN1 and LAN2 settings ENABLE DHCP 00 40 48 bf e3 2d Please Note 1 After enabling DHCP The IP configuration becomes Greyed out REFRESH Step 6 Change the value of PREFFERED DNS SERVER to 8 8 8 8 ALTERNATE DNS SERVER can be left blanc 8 8 8 8 Step 7 From the SELECT NIC dropdown select LAN2 Step 8 Manually assign an IP address to LAN2 please note that LAN2 cannot be in the same range as LAN1 The Subnet mask for LAN2 should be 255 255 255 0 www hikvision com en us VISION SS After assigning the IP information click on the MORE SETTINGS tab we DDNS Email SNMF More
10. ctory default firmware version system logs camera status HDD import export status and more settings g Exit MENU to Log Out and Lock Display the current Live View the NVR logged in user www hikvision com en us VISION CC lf the Hard Drive HDD is not formatted initialized the NVR will begin to beep The beeping will continue until the HDD is formatted To format the HDD go to MENU gt SYSTEM CONFIGURATION gt HDD Select the HDDs that need to be formatted and press INIT Record Information Storage Mode 931 52GB Normal RIW Local 416 00GB 1 i List of HDDs Total HDD Space 416 00GB Free Space Estimated time of recordina davs Please Note Units purchased with HDDs already come with formatted HDDs Formatting the HDDs also erases the recorded video from the HDDs this does not affect the settings www hikvision com en us VISION To setup the Time and Date on a DVR NVR please go to MENU gt SYSTEM CONFIGURATION gt GENERAL Display More Settings Time Date YYYY MM DD H 2014 07 18 a 15 40 03 Time Zone GMT 08 00 Pacific Time v Enable NTP a NTP Settings Time Zone Date and Time and Daylight settings Savings Time settings www hikvision com en us VISION Networking a DVR NVR requires 3 steps 1 Assign an IP address Default Gateway Subnet Mask and a DNS server Please note DNS not DDNS to t
11. e Please note The CAMERA Alias Demo 01 Alias Demo 01 NUMBER has Register Mode HiDDNS Register Mode HiDDNS changed to the correct number Device Domain applet Device Domain apple of cameras User Name admin User Name admin con nected to the DVR NVR Password se ses00 Password ese ee Camera No 0 Please note START LIVE VIEW button will begin live camera stream www hikvision com en us VISION a Full Screen button Going to a full screen view To initiate a PLAYBACK go to MENU gt PLAYBACK 4 Normal we x Normal Max Ca Min Ca Event Select a Camera 01 camera to iPCGamera 02 a Tag iPCamera 03 Smart iPCamera 04 Select the Camera 01 desired date to z External File playback Sub periods BiPCamera 07 iPCamera 08 liPCamera 09 liPCamera 10 ilPCamera 11 Press PLAY to iPCamera 12 begin playback iPCamera 13 IPCamera 14 Click on the timeline to select the desired time of 12 24 17 12 13 14 a i1 tbt amp t eA Steps to initiate PLAYBACK 1 Select the desired camera 2 Select the desired date The days that contain recording will be highlighted on the calendar 3 Press PLAY 4 Select the desired time using the Timeline or Jump to Time feature www hikvision com en us VISION 0 Exit and save clip Normal Normal Camera 01 iPCamera 02 iPCamera 03 gt Smart IPCamera 04 Sub
12. he DVR NVR 2 Forward the appropriate ports on the router Port Forwarding 3 Register DDNS DDNS registration is required only if the public IP address is Dynamic To assigning an IP ADDRESS go to MENU gt SYSTEM CONFIGURATION gt NETWORK Working General ee Mode GENE DDNS Email SNMP NAT More Settings Default le Route AN1 OM 100M 1000M Self ada 92 0 0 64 Enable 2 DHCP With DHCP Select NIC Ab at 00 40 48 bf 63 2d enabled the router will assign an IP address to the DVR NVR IP CONFIGURATION Note that the DVR NVR has a default IP Address set to www hikvision com en us HIIK VISION a _______ Working Mode Select NIC and Default Route do not exist in the DS 7716NI SP 16 Plug n Play NVR Working Mode sets the binding method between the 2 network cards Working Mode has 3 modes e Net Fault tolerance Both LAN ports need to be connected to the camera network In case one LAN port fails the other one will take over the connection This is a Network Redundancy Mode e Load Balance Both LAN ports need to be connected to the camera network The LAN cards split the network load This is recommended for DS 9664NI ST RT e Multi Address In this mode the LAN cards operate independently from each other One LAN port will connect to the camera network the other LAN will connect to the Router for remote access Default Route determines which LAN port is used for accessing the D
13. indicator e Level 0 Risky red indicator Not acceptable e Level 1 Weak red indicator Acceptable e Level 2 Fair orange indicator Acceptable e Level 3 Strong blue indicator Acceptable Activation will not be allowed unless the password is of acceptable strength NOTE The strength level indicator colors can vary by activation process model number and device type www hikvision com en us HIK VISION a NO 5 Retype the password into the Confirm Password field After an acceptable password has been created a confirmation message will appear on the screen Press the OK button to proceed e SADP Software Activation v2 2 3 5 or higher 1 Launch the new version of the SADP software v2 2 3 5 The software will display all Hikvision devices on the network Anew field called Security will be displayed If the DVR NVR is Inactive highlight the DVR NVR and enter a new password into the New Password field on the bottom right of the screen The password strength will be displayed accompanied by a color indicator Level 0 Risky no indicator Not acceptable Level 1 Weak pink indicator Acceptable Level 2 Medium yellow indicator Acceptable Level 3 Strong green indicator Acceptable Bar length indicates strength level Activation will not be allowed unless the password is of acceptable strength If the password is unacceptable strength R
14. isky a warning box will be displayed Retype the password into the Confirm Password field After the password has been entered and confirmed press the OK button to display the pop up confirmation window Press the X in the top right corner of the pop up confirmation window to dismiss the window www hikvision com en us HIK VISION a NO e iIVMS 4200 Windows Client Software v2 3 1 3 or higher Activation iP 2 Launch the iVMS 4200 software Go to Control Panel gt Device Management On the bottom of the screen in the Online Devices section the screen will display all Hikvision devices on the network Anew field called Security will be displayed If the DVR NVR is Inactive highlight the DVR NVR and press the Activate button to display the Activation window Enter a new password into the Password field The password strength will be displayed accompanied by a color indicator e Level 0 Risky no indicator Not acceptable Level 1 Weak pink indicator Acceptable e Level 2 Medium yellow indicator Acceptable e Level 3 Strong green indicator Acceptable Bar length indicates strength level Activation will be allowed if the password is of acceptable strength lf the password is of unacceptable strength Risky a warning box will be displayed explaining the requirements for an acceptable password Retype the password into the Confirm Pass
15. ording RESOLUTION FRAMERATE BITRATE seitings please go to RECORD QUALITY in the RECORDING CONFIGURATION submenu Select Main Stream Substream Record Capture P Camera 1 Record ideo amp Audio Qual ity 920 1080 1080P ariable Select Camera N ain Stream Continuous Event Pertains to live Pertains to event view image as recording only well as Motion or alarm continuous recording www hikvision com en us HIK VISION CO ee Stream Type allows enable disable the audio streaming from the cameras if the camera does not have audio capabilities then the Stream Type will only have Video option Resolution allows setting of the recording resolution Bitrate Type allows the NVR to save HDD space when set to Variable Available choses Variable and Constant Video Quality adjusts picture clarity medium setting 3 green squares is recommended Medium setting is the balance between good picture and saving HDD space Frame Rate allows setting of the recording frame rate 12 15 fps is recommended to save HDD space and not to have a choppy image Max Bitrate Mode allows choosing between preset bitrate values and customizing the values General setting is recommended Max Bitrate KBPS is the chosen bitrate for streaming the video Max Bitrate Recommended is the NVR DVR s recommended bitrate according to the parameters set above Record Audio allows turning the audio recording on or off
16. periods 5 External File Mi Camera 01 iPCamera 07 iPCamera 08 START END WEiPCamera 09 Clipping iPCamera 10 iPCamera 11 iPCamera 12 iPCamera 13 IPCamera 14 Event Tag Select the Select the START TIME END TIME a mas Nea a Steps to make a BACKUP of recorded video 1 Insert a USB FLASH Drive or a USB HDD into an available USB Port Go to MENU gt PLAYBACK Select the DATE and beginning time of the incident Click START CLIPPING Select the ending time of the incident Click END CLIPPING Same button as Start Clipping Repeat steps 1 7 as many times as required Click EXIT or right click Click YES to save clipping OONDAIARWD www hikvision com en us VISION After pressing YES a new window pops up containing all saved clips Locked File Tag 2015 06 30 09 39 38 09 39 40 133 7 53KB Select the desired clips If selected multiple 1 x clips created from l EXPORT THE the same camera CLIPS TO USB will be stitched DEVICE together 10 Select the desired clips 11 Press EXPORT 12 After the backup is complete simply remove the USB FLASH Drive or the USB HDD www hikvision com en us
17. r Output x1 3 DVD RW Drive Optional 4 HDMI Monitor Output x1 4 DVD RW Eject Button 5 e SATA Port 5 USB Ports x2 6 RJ 45 Network Ports x2 6 Control Buttons 7 RESERVED 7 Directional and Enter Buttons 8 Alarm In Out RS 485 Pins 8 Jog Control 9 Grounding Post 9 Power Button 10 Power Plug 10 Front Panel Lock 11 Power Switch 11 Control Buttons www hikvision com en us HIK VISION oft Device Activation To ensure the highest level of protection Hikvision requires users to create a new password for the admin account upon first login to a device The system will check the password strength Risky passwords will not be accepted Device Firmware with Secure Activation NVR Hybrid DS 9016HWI ST V3 1 5 DS 96xxNI ST DS 7716NI SP 16 Plug n Play NVR DS 76xxNI El E2 P V3 1 0 Turbo DVR DS 72xxHGHI SH V3 1 6 m i ae DS 90xxHQHI SH DS 96256NI E24 H NOTE DVRs NVRs starting with the latest firmware see chart above WILL NO LONGER HAVE A DEFAULT PASSWORD The user must activate the DVR NVR by creating a password for the admin account in one of four ways e Local Activation 1 Power on the DVR NVR A message will appear prompting user to activate the device The username field will be greyed out with the username set to admin 2 Type in a password of your choosing see Password Strength Levels table for guidelines The password strength will be displayed accompanied by a color
18. st time a tutorial screen will be displayed and it can be easily skipped O nl Ca 66 IVMS 4590 Select Region Region 7 Launch Select the APP your region www hikvision com en us ISION MENU BUTTON DEVICES BUTTON Devices Alarm Picture amp Video EZVIZ Cloud P2P Configuration 1 9 9 ce amp Z C Gi amp C ADD BUTTON Manual Adding ENTER THE INFO REGISTER MODE Please Note If free HikVision Hangzhou PESTo ia Alias Demo 01 DDNS is Scan QR Code configured for Wi Fi Configurat Register Mode IP Domain the device change the Address 123 123 123 123 REGISTER Port 8000 MODE to z HiDDNS User Name admin Password eeeee Register Type Camera No HiDDNS IP Domain IP Server Cancel www hikvision com en us Please Note Alias is just a friendly name for the address book i e Home Office User Name and Password are the DVR s NVR s username and password Alias Alias Demo 01 Register Mode HiDDNS Register Mode HiIDDNS Device Domain applet gt Device Domain applet User Name admin gt User Name admin Please note ee ree ee ee The CAMERA NUMBER is set Camera No 0 Camera No 0 to 1 Register Type After saving the HiDDNS changes the IP Domain number will resemble the IP Server correct amount of cameras Cancel SAVE BUTTON New Devic
19. word field After the password has been entered and confirmed press the OK button The DVR s NVR s status will change to Active www hikvision com en us HIK VISION a NO e Web Interface Activation 1 In a Web browser type the DVR s NVR s IP address and press Enter The Activation Window will appear instead of the login page 2 Enter a new password into the Password field The password strength will be displayed accompanied by a color indicator e Level 0 Risky no indicator Not acceptable e Level 1 Weak pink indicator Acceptable e Level 2 Medium yellow indicator Acceptable e Level 3 Strong green indicator Acceptable Bar length indicates strength level Activation will be allowed if the password is of acceptable strength A white checkmark will appear in a green circle to the right of the password field If the password is unacceptable strength Risky a white X will appear in a red circle to the right of the password field and a warning dialog box will be displayed explaining the requirements for an acceptable password 3 Press the OK button Upon successful activation user will be logged in to the DVR s NVR s live view page www hikvision com en us HIK VISION a ND Password Strength Levels STRENGTH LEVEL Level 0 Risky NVRs will not accept a Level 0 password Level 1 Weak NVRs will accept a Level 1 password NOTE DESCRIPTI
Download Pdf Manuals
Related Search