Digital Active Indoor Antenna SRT ANT 10 ECO
Contents
1. Mn DIGITAL TV 18 Jan 2011 16 30 PART 1 English TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Features amp Accessories 1 5 Usage of external USB devices 2 0 CONNECTION 2 1 Connecting to TV and Terrestrial Antenna 2 2 Connecting to a Digital Audio Amplifier 3 0 YOUR RECEIVER 3 1 Front Panel 3 2 Rear Panel 3 3 Remote Control 3 4 Default PIN code 0000 4 0 FIRST TIME INSTALLATION 5 0 MAIN MENU 5 1 Channel 5 2 Installation 5 3 Setup 5 4 Tools 5 5 Media 6 0 OPERATION 6 1 Changing Channels 6 2 Accessing the Electronic Program Guide EPG 6 3 Accessing the favourite channels 7 0 TROUBLE SHOOTING 8 0 SPECIFICATIONS STRONG declares that this item complies with the basic requirements and STRONG DIGITAL TV E 0180 501 49 91 URWWNN Ut tn un A 11 12 12 13 13 13 14 other relevant regulations of directives 2 from German wired line e CE 2004 108 EEC and 73 23EEC RoHS 2002 95 max from mobile network 5 Subject to alterations In consequence of continuous research and ue 5 development technical specifications design and appearance of products 0820 400 150 E may change All product names are trademarks or registered trademarks of 0 2 Min from Austrian wired line their respective owners de amp STRONG 2011 All rights reserved 01 2012. No function Channel selection or value input Shows the EPG Electronic Program Guide in TV mode Back to previous shown channel Sets the current audio channel to left right or stereo Toggles between TV or RADIO mode Favourite group selection no function Shows Teletext on OSD On Screen Display Shows list of subtitled languages Rewind Fast forward of video files 24 COLOURED BUTTONS for Teletext and other functions 3 4 Default PIN code 0000 4 0 FIRST TIME INSTALLATION If you use the receiver for the first time the Easy Install menu appears Use W A to select Region OSD Language Antenna Power and Scan Mode and lt P to select options Then use the buttons to move focus to Search and press OK to proceed with the automatic channel scan 5 0 MAIN MENU In viewing mode press MENU at any time to enter the Main Menu It consists of the following submenus Channel Installation Setup Tools and Media 5 1 Channel Use the V A buttons to select Channel and press OK to enter 2 Use the A buttons to highlight the desired item and press OK to select www strong tv PART 1 English 419 TRONG DIGITAL TV 3 Press EXIT to exit e NOTE You can also press OK in TV mode to enter the channel list 5 1 1 TV Channel list 1 In Channel submenu select TV Channel List with the W A buttons and press OK to enter 2 Use the lt P buttons to change channel group assumed you have already set up Favourit
3. Decoding amp Video Out Aspect ratio Audio Decoder MPEG MusiCam Layer 2 Sampling rate Audio mode Tuner Front End Input frequency range Loop through frequency range 8 0 SPECIFICATIONS COFDM 16 QAM 64 QAM 2K 8K MPEG2 MP ML 720 x 576 pixels PAL 720 x 480 NTSC PAL amp NTSC 4 3 16 9 32 44 1 48 kHz Stereo Joint Stereo Dual Mono Mono DVB T UHF amp VHF Tuner 174 230 MHz VHF and 470 862 MHz UHF 47 862 MHz Input signal level 82 20 dBm Multimedia Video playback MPEG 1 and MPEG 2 encoded mpg Audio playback MP3 and WMA formats Picture view JPEG format 14 www strong tv PART 1 English STRONG DIGITAL TV Memory and System Flash memory 1 MByte SDRAM 8 MBytes Connectors ANT IN IEC Female TOTV IEC Male TV SCART RGB CVBS S PDIF coaxial output USB 1 1 port max 5 V 800 mA General Data Supply Voltage 220 240 V AC SMPS 50 60 Hz Power Consumption 3 13 W typ 5 W max Power consumption in Standby 0 74 W Operating Temperature 0 40 Storage Temperature 30 80 C Operating Humidity Range 10 85 RH Non condensing Size WxDxH in mm 138 115 x 40 Net weight 0 33 kg 15 www strong tv STRONG DIGITAL TV 18 www strong tv
4. OK to delete or select No to cancel 5 1 4 Delete all Use this option to delete all channels Select Delete All with and press OK then enter the Password default 0000 In the confirmation window select Yes with lt P and press OK to delete or select No to cancel 5 1 5 Group Rename In this menu you can change the name of favourite groups Use the W buttons to select Group Rename and press OK to enter 1 Select a group with A and press OK 2 Use the V A gt buttons to navigate the on screen keyboard Highlighted characters can be inserted by pressing OK After entering the desired group name highlight OK at the keyboard to confirm 3 Press EXIT to cancel the group rename 5 2 Installation 5 2 Auto Scan 1 Use the V A buttons to select Installation and press OK to enter menu 2 Use V A to select Auto Scan and press OK to enter the menu 3 Change the Scan mode with lt P Use A to highlight Search and press OK to start auto scan 5 2 2 Channel Scan 1 Usethe V A buttons to select Installation and press OK to enter the menu 2 Select Channel Scan with A and press OK to enter 3 Use the lt P buttons to select the desired Scan Modes By Channel or By Frequency 8 www strong tv PART 1 English 419 TRONG DIGITAL TV 4 When By Channel is selected use the cursor buttons to select Scan Band and Channel No When By Frequency is selected use the cursor buttons to select Frequency and Bandwid
5. STR ONG Digital Active Indoor wv Antenna SRT ANT 10 UHF VHF User Manual m 5 V UHA 41312 indoor antenna EADY WHE www strong tv SRT ANT 10 ECO STRONG 1 INTRODUCTION B Thank you for purchasing the STRONG SRT ANT 10 ECO DVB T T2 Antenna This antenna has been specially designed to receive digital terrestrial signals from the air It can be connected to any Digital Terrestrial Receiver DVB T T2 and is designed for INDOOR use only This DVB T T2 antenna is an Active type antenna it has a built in low noise amplifier that amplifies the received signals for better performance We recommend you to carefully read this user manual before you install the antenna this will help you to get the best performance out of your antenna Specifications Frequency range VHF 47 230 MHz UHF 470 870 MHz Gain 45 dB for VHF and UHF RF Output Impedance 75 Ohm Power Supply 5 V 40 mA via RF port of the STB or 12V DC 250 mA via external 230 V AC to DC adapter Special Features Built in Low Noise Amplifier technology High directionality optimised pointing to the transmitter and reduced pick up of disturbing signals 2 PACKAGE CONTENT 1 SRT ANT 10 ECO Active DVB T T2 Indoor Antenna 2 Standing unit 3 Coaxial Cable 2 meters 4 User Manual lt gt B Main Unit Standing Unit Coaxial Cable 3 SAFETY NOTES Before you make any connections disconnect your equipment from the
6. in to enter Find menu Use the V A gt buttons to highlight desired letters or numbers and press OK to insert After each character the channel list will search the channel according your input and list the matched channel Press EXIT to quit Find mode 5 1 1 3 Sort Press the button 3 to enter Sort menu Use the V A buttons to highlight the desired sort option and press OK to confirm Default Sorting by searched Order from lowest to highest frequency Name A Z Sorting in Alphabetical Order Name Z A Sorting in Alphabetical Order www strong tv 7 STRONG DIGITAL TV FTA First in the list will be Free To Air channels Lock Unlocked channels will be listed first followed by all locked channels 5 1 1 4 Move Press the button 4 to activate the Move function The selected channel will be marked with the symbol Use the buttons to move the selected channel to the desired position Press OK use lt P to select Yes in the confirmation window and press OK to save the changed position 5 1 2 Radio Channel list The operation of Radio Channel List is the same as in TV Channel List Since there is no video information in Radio mode the radio background will be displayed in the preview window on the right 5 1 3 Delete all Favourites and Groups Use this menu to delete all favourite channels Select Delete All Favourites with the A and press Use lt P to select Yes in the confirmation window and press
7. keep the cable as short as strictly needed Extending the cable or using a bad quality cable will reduce the performance of your antenna www strong tv HOTLINE STRONG vous remercie pour votre achat SVP contactez notre service HOTLINE si vous avez la moindre question concernant votre nouveau decodeur Thank you for purchasing a receiver from STRONG Please contact our Service HOTLINE for questions regarding installation or operation AT 0820 400 150 sterr Festnetz support_at strong tv BG 359 32 634 451 support_bg strong tv DE 0180 501 49 91 014 Min aus deutschem Festnetz ma aus Mobilfunknetzen support_de strong tv DK support_dk strong tv www strong tv FR 0826 029 928 en France support_fr strong tv IT 199 404 032 Da rete isa Da rete mobile 24A eent al min m s 49 cent ai nin 125 scatto ala risposta 15 6 cert sata ala riporta support_it strong tv HU 36 24 445 282 support_hu strong tv NL support_ni strong tv UA 38 044 238 60 94 support_ua strong tv 17 Feb 2011 21 16 lt gt 7RONG Digital Terrestrial Receiver SRT 5300 User manual Picture similar www strong tv ANTENNA Fig 1 RF CABLE L our TV RECEIVER i TELEVISION STRONG 5300 3 240 50 60 42 5 nfax ANT IN TOJ TV Model Digital rrestrial Receiver SRT 5300
8. password 2 Input the correct password using the numeric buttons the default password is 0000 A confirmation window will be displayed 3 Select Yes to return back to factory settings and clear all channels Select No to cancel 4 Press EXIT button to exit 5 4 4 sofware Upgrade Enter Tools menu select Software Upgrade and press OK button The Sofiware Upgrade menu is shown 2 Use to select Upgrade by Storage and press OK You are asked to input password 3 Input the correct password the default password is 0000 The Software Upgrade submenu will be opened Then select the correct software file and press OK to start www strong tv 11 STRONG Dites DIGITAL TV A message will be displayed to confirm the update process Select Yes to confirm or No to cancel 4 Press EXIT button to leave A WARNING After an update the receiver restarts automatically During this process NEVER disconnect the receiver from the mains or switch OFF the power This can damage your receiver and will void the warranty 2 1 This receiver is equipped with an over the air update function which might not be operational in your broadcast region For further details visit our website wwwftrong tv orkontact your local Service line 5 5 Media Select Media and press OK to enter Media menu 1 Press MENU to enter the main menu Select Media and press OK to enter the menu 2 Use to highlight the desired menu and press OK
9. strong tv SRT ANT 10 ECO lt gt 7RONG DIGITAL TV 2 Press the MENU button on the remote control of your Digital Terrestrial Receiver Check in the Set Up or Installation menu of your receiver if the antenna power is set to Normally this is indicated in the menu as ANT power Ext Antenna power or Active antenna power 3 Select in the menu of your receiver the field that shows the signal level indicators Normally you can find the signal meter in the Channel Scan field of the menu 4 Now optimise the signal strength by finding the best position for the antenna Keep the antenna in your hand try to reach the highest possible position Now slowly turn the antenna around its axis in the horizontal field at the same time monitor the signal bars in the menu Once the signal indicator shows the maximum signal fix the antenna on that position 5 Itis important to place the antenna in such way that an acceptable signal level is assured You can optimise the signal strength by moving the antenna to different locations in your room for example place it near a window or place it on a high placed book shelf The best position can be found by trying different locations NOTE Itis recommended NOT to place the antenna near to Devices that are strong source of radiation or interference such as DECT and GSM telephones transmitters microwaves etc Devices with high power consumption such as electrical heater air condit
10. to enter 3 Press EXIT to leave Media Use the two button rows in bottom of your remote control for Player operation A help screen showing how to use the buttons will be displayed on screen 5 5 1 Media Player This function allows you to play and 2 video Audio and Photo files from a connected USB device 1 Media menu select Media Player and press OK to enter the menu 2 Use to select the desired item and press OK or PLAY to play the desired files 3 Press EXIT to quit 5 5 2 Safely Remove Storage Device In Media menu select Safely Remove Storage Device and press OK to safely remove the USB device A message indicating that the device can be removed will be displayed 6 0 OPERATION 6 1 Changing Channels There are 4 ways of channel selection stepping through the channel list selection by number from the on screen channel list and using the electronic programme guide EPG Stepping through the channel list To move through the channel list use the buttons on the remote control Selection by direct channel number input Enter the channel number directly by using numeric buttons and press the OK button to select the channel 12 www strong tv PART 1 English 419 TRONG DIGITAL TV Selection by on screen channels list You can also select the required channel directly from on screen channel list To call up the channel list OK in viewing mode Alternatively the list can be
11. use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a ligh
12. 1 I 0826 029 928 60 4 from French wired line 1 www strong tv STRONG T DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never
13. 230 V main power to avoid electric shocks during installation Short circuit in the cable MAY permanently damage your Digital Receiver Never install the antenna outside your house or in humid rooms such as bathrooms Never use AC adaptors with wrong specifications this MAY permanently damage your antenna or Digital Receiver Always check voltages and polarisation of the adaptor before connecting it www strong tv 1 STRONG DIGITAL TV 4 CONNECTING THE ANTENNA Check if the broadcast in your country is horizontal or vertical polarized Click the antenna in the plastic holder as shown in the pictures H Broadcast antenna V Broadcast antenna mounted H mounted V Upright Disconnect your Digital Receiver from the 230 V main power Connect the supplied RF cable to the antenna carefully press the inner lead of the cable into the Female F connector at the back of the antenna Turn the covering nut clockwise with your HANDS until it is fixed Connect the other side of the RF cable to your Digital Terrestrial Receiver Normally the input connector on your receiver is marked as in or as RF in Connect your Digital Receiver to the 230 V main power Rear View DC Outlet SCART cable 4 Coaxial AC Adaptor AST DC 12 V Optional Digital Set Top Box 5 INSTALLATION OF THE ANTENNA 1 Turn on your TV set and turn on your Digital Terrestrial Receiver 2 www
14. ITAL TV 1 5 Usage of external USB devices It is recommended to use USB 1 1 storage devices If your device is not compatible to USB 1 1 specifications playback and other multimedia functions of the receiver would not work properly To ensure best performance of your USB storage device please format it by this receiver menu Media gt Disk Format to FAT32 system Other file systems are not supported by the receiver STRONG cannot guarantee compatibility to all types of USB storage devices If you are going to use external USB HDD Hard Disk Drive please consider that the power specifications might exceed the supported output of your receiver 5 V 800 mA If so please connect your USB HDD to an according external power adapter It is advised not to store important information on USB storage devices used with the receiver Always make backups of data on USB storage device before usage with receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information 2 0 CONNECTION 2 1 Connecting to TV and Terrestrial Antenna To receive the broadcast signal the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver Fig 1 2 2 Connecting to a Digital Audio Amplifier Connect your Digital Audio Amplifier with the S PDIF connector on the back of the receiver Fig 1 3 0 YOUR RECEIVER 3 1 Front Panel i 3 2 Rear Panel 1 w Fig 2
15. USB Connects to USB device Fig 3 ANT IN To connect an antenna for reception of broadcasting signal Active antennas can be supported with max 5 V 500 mA DC TOTV To connect a TV set or to connect an extra receiver S PDIF Coaxial To connect your receiver to digital audio amplifier TV SCART Connector To connect your receiver with your TV set using a SCART cable Power Cord Your receiver requires a voltage of 220 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet www strong tv 5 STRONG PART 1 English DIGITAL TV 3 3 Remote Control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PG PG DTV VCR INFO VOL VOL MENU EXIT 4 OK RECORD TIMESHIFT 0 9 EPG RECALL AUDIO TV RADIO FAV FILE TIX SUBTITLE Fig 4 Turns the receiver On Standby Mutes audio output of the receiver Page up down No function Shows the actual channel information Volume up down Opens the main menu In menu you will get one step back Exits from the menu or sub menu Menu On Moves the cursor up down Menu Off Change channel to previous next Menu On Change settings for specific Menus Menu Off Increases decreases the volume level Menu On Activates the highlighted menu item Menu Off Displays the current channel list No function
16. displayed using the receiver s main menu See chapter 5 1 1 TV Channel list in this manual for operation details Selection via EPG You can also select the required channel directly from electronic programme guide EPG To display the EPG press EPG on remote control See chapter 6 2 below for details 6 2 Accessing the Electronic Program Guide EPG Press EPG to enter EPG menu Use the numeric button 2 to switch the highlight between channel list events schedule of the selected channel and now next events 3 Inthe event schedule press the numeric button 3 to book a timer for the highlighted event Press OK to open the Detail menu for the selected event 4 Press the numeric button 1 to open the Booking list menu 6 3 Accessing the favourite channels 1 In viewing mode press FAV to enter the favorite group menu 2 Use A V to select the desired favourite group 3 Press OK to enter the favourite channels list and use V to select the desired channel 7 0 TROUBLE SHOOTING There may be various reasons for abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact your local Service line or STRONG dealer Alternatively you can send a support mail via our website www strong tv DO NOT open the receiver cover It may cause a dangerous situation and will void the warranty Problem Possible cause What to do LED indica
17. e groups 3 With the Y A buttons select the channel you wish to watch Press OK to watch the selected channel in full screen mode 5 1 1 1 Edit Use this menu to lock skip delete or rename channels or add them to a favourite list Press the numeric button 1 to enter the Edit menu Highlight a channel with the buttons and press OK to select or press numeric button 0 to select all channels Selected channels will be marked This way of selection can be executed for each of the edit functions Favor To add selected channel or all channels to a favourite group press the 1 button Use the V to select a desired group and press OK With lt P select Yes in the confirmation window and press OK to save Selected channels will be marked with a folder symbol Lock Press 2 to Lock one channel or all channels Use lt P to select Yes in the confirmation window and press OK to save Selected channel s will be marked with the amp symbol Skip Press 3 to Skip one channel or all channels Use lt P to select Yes in the confirmation window and press OK to save Selected channel s will be marked with the and will be skipped during channel zapping in full screen mode Delete Press 4 to Delete one channel or all channels Use lt P to select Yes in the confirmation window and press OK to save Rename To Rename a channel press button 5 When all desired changes are made press EXIT to leave the menu 5 1 1 2 Find Press the button 2
18. er will switch to standby automatically when it doesn t receive commands from the remote control for three hours To avoid the automatic switch off set Auto Standby to OFF 5 4 Tools Press MENU to enter Main Menu Select Tools with the W buttons and press OK to enter 1 Use A V to highlight the desired menu and press OK to enter 2 Press EXIT to leave 5 4 1 Receiver Information This menu displays relevant Receiver information like the Receiver Model Software version Signature and our website www strong tv 1 In Tools menu select Receiver Information and press OK to open receiver information 2 Press EXIT to leave 5 4 2 Game This menu allows you to play games Tetris Snake and Othello on this receiver 1 Select Game in Tools menu and press OK to enter the game menu 2 Use A V to select a desired game and press OK to enter the game Highlight Start and press OK to start the game For changing levels highlight Setup and use the lt gt buttons 3 Press EXIT to quit the game You can also press OK to pause playing 5 4 3 Load Factory Default This option allows you to reset the receiver to factory settings which clears all stored channels and settings A WARNING This option will permanently delete all your settings and channel lists and set your receiver to factory default Please use with caution 1 Enter Tools menu select Load Factory Default and press OK button You are asked to input your
19. he numeric buttons When you leave the programme timer a saving window appears Use lt P to select Yes in the confirmation window and press OK to save or select No to cancel Duration Press OK to input the timer duration with the numeric buttons Sleep Timer You can set the receiver to power OFF 10 min 30min 60 90min and 120min automatically 5 3 6 OSD Setting This menu allows you to change settings for Subtitle Display OSD Transparency and Load Default OSD Setting Subtitle Display To set the subtitle to Standard or OFF OSD Transparency To set the OSD transparency from Off 50 OSD Timeout To define how long the information banner is to be shown 55 105 Load Default OSD Setting To clear all OSD settings and reset to default value 5 3 7 Parental Lock This menu allows you to protect the installation menu or channels with a password You can also change the Password here When entering the menu you will be asked to input the password default 0000 Menu Lock Locks the installation menu You can set menu lock to ON OFF Channel Lock Off Manual Age 4 Age 18 New Password Input your new password here to change the password Confirm Password Input your new password again to confirm the new password 10 www strong tv PART 1 English 41 TRONG DIGITAL TV 5 3 8 Auto Standby This option allows you to enable or disable Auto Standby The default setting for Auto Standby is ON The receiv
20. ingual DVB subtitling and audio track support Support Teletext via receiver and TV remote control 8 Favourite lists for TV and Radio programmes Parental lock function for menu and rating control for channel Multi lingual support on screen menu OSD such as English German French Italian Spanish Czech USB 1 1 port for software update playing video and music files and viewing photos Automatic and manual channel scan options Many channel handling options locking editing moving sorting skipping deleting and searching Power on with last viewed channel User friendly Remote Control NTSC PAL converting automatically and manually 3 Games Tetris Snake Othello Digital sound through coaxial output S PDIF by connecting to digital amplifier DVB T compliant UHF VHF Tuner with Loop through function Support of active antenna by 5 V output Power saving automatic standby function Depending on local signal conditions Availability depending on broadcaster Accessories NOTE 1 User Manual 1 Remote control unit 2x Batteries AAA type The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control www strong tv PART 1 English 419 TRONG DIG
21. ioner hairdryers etc Ifyou can not find this option in the menu of your Digital Terrestrial Receiver please check in your user manual if your receiver supports active antenna power 5 V DC via the RF cable If you are not sure please contact your dealer In case this option is not supported by your Digital Receiver you need to connect an external power supply to power the antenna Ask your electronic dealer for an external 230 V AC to DC power adapter that supplies 12 V DC 250 mA Note that the and the of the power adaptor are located as follows The connector for the external power supply can be found at the backside of the antenna NOTE The antenna will not function properly if the built in amplifier is not powered Therefore it is required to supply the antenna with power via the RF cable or via an external adapter Extension of the RF cable In some cases you may need to extend the standard supplied RF cable we advise you to only do this if you can t get optimal signal strength within the reach of the standard cable If you are to extend the RF cable then please note following comments Use a good quality RF cable 75 Ohm type only with proper shielding a Use well shielded connectors your dealer can advise you on this Make sure that both inner cable and shielding are properly connected to the connectors to assure active antenna power supply and to avoid short circuit in the cable If you extend the cable please
22. ith its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Refer to the user manual of your TV and your antenna Make sure that the SCART cable and outdoor components of the antenna good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow Warning Indicates warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character www strong tv STRONG TN DIGITAL TV 1 4 Features amp Accessories For all digital Free To Air TV and Radio programmes with outdoor or indoor antenna Quick and easy installation amp user friendly menu Excellent Audio and Video quality 1 000 channels memory capacity Fast channel zapping sorting by alphabet free encrypted channels Electronic TV Programme Guide EPG for on screen programme information of present following event information up to 7 days 8 timers with 4 modes once daily weekly monthly Sleep Timer 10 30 60 90 120 min Booking of events directly from EPG Full multi l
23. rating instructions Adjust only the controls described in the operating instructions ad improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required mare sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging w
24. tem This menu allows to setup different settings concerning your TV set Display Mode PAL NTSC AUTO Aspect Ratio Use this menu to configure the screen aspect Possible settings are 4 3PS 5 4 3LB Letter Box 16 9 Wide Screen and AUTO Video Output Use this menu to switch the video output mode between RGB and CVBS 5 3 4 Region and Time Here you can set your region and time zone www strong tv 9 STRONG TN DIGITAL TV Region This menu is used for changing the region setting GMT Usage This setting allows you to switch the usage of GMT time on or off The options are Off User Define By Region GMT Offset This menu is valid only when User Define is selected in GMT Usage menu The GMT offset range is 11 30 12 00 increasing by half hours progressively Date Time Date and Time menus are valid only when Offis selected in GMT Usage menu Press OK followed by numbers to change the date and time Time Display This menu allows to control whether the time is displayed on screen or not The options are Off On 5 3 5 Timer Setting In this menu you can set a programme timer or sleep timer Programme timer Timer Number You can set up to 8 timers Timer Mode Off Once Daily Weekly Monthly Timer Service TV Serice Radio Service Wake up Channel You can select any channel as wake up channel Month Date Day Use to select the start month date and day Time Press OK to input the time with t
25. th Set Network Search to ON or OFF highlight Search and press OK to start scanning Found channels will be stored and the receiver will switch to the first channel in the list 5 2 3 Antenna Setting 1 Press MENU to enter main menu 2 Use the buttons to select Installation and press OK to enter the menu 3 Select Antenna setting with and press OK to enter 4 Use the lt P buttons to change the setting If On is selected the receiver will provide 5V antenna power for active antennas 5 Press EXIT button to exit 5 2 4 LCN Mode If LCN Logical Channel Numbering is activated and LCN signal is provided by the operator channels will be stored in operator defined order You can activate deactivate the LCN function by setting the LCN Mode to ON or OFF 5 3 Setup This menu allows you to set OSD Language Subtitles preference TV System Region and Time Timer Setting OSD Setting and Parental Lock 1 Use A V to highlight the desired menu and press OK to proceed Select the desired item with V Settings can be changed with the lt P buttons To get a better overview of possible settings press OK first Now you can select settings with AW and confirm with OK 2 Press EXIT button to exit 5 3 1 OSD Language This menu allows you to set the OSD Language 5 3 2 Subtitles preference This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between Normal and Hard of Hearing 5 3 3 TV Sys
26. tning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage 2 www strong tv PART 1 English 419 TRONG DIGITAL TV Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter Unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 product does not operate normally despite following ope
27. tor not lit Mains lead unplugged Check mains plug No signal found Aerial is disconnected Check aerial lead Aerial is damaged misaligned Check aerial Out of digital signal area Check with dealer Active antenna requires to Switch receiver s Antenna Power ON switch ON antenna power connect external power external power No picture or sound Scart AV is not selected on Switch to correct TV input TV your TV TV is not switched on Switch TV on Scrambled channel Channel is scrambled Select alternative channel message www strong tv 13 STRONG PART 1 English DIGITAL TV No response to remote control Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries Forgotten PIN code Contact local Service Hotline or send email to our Support via www strong tv After moving the receiver to another room area you are no longer able to receive digital reception Antenna signals are too weak Press the INFO button on remote 3x to call up signal bars and adjust antenna for maximum reception or rescan channels The receiver switches off automatically Auto Standby function enabled Disable auto standby See section 5 3 8 for details Demodulator Demodulator Transmission mode Video Decoder Profile level Video resolution
Download Pdf Manuals
Related Search