DaqLab/2001
Contents
1. Declaration of Conformity According to ISO IEC Guide 22 and EN 45014 Part 1126 0740 Rev 04 06 Manufacturer s Name 1Otech Inc Manufacturer s Address 25971 Cannon Road Cleveland Ohio 44146 U S A Declares that the product Product Name DaqScan 2001 2002 2004 2005 DaqLab 2001 2005 Description 16 bit 200 kHz Multi Function Data Acquisition Systems Conforms under conditions on reverse side to the following standards CE Compliant Operating Conditions Product Name DagqScan 2001 2002 2004 2005 DaqLab 2001 2005 Description 16 bit 200 kHz Multi Function Data Acquisition Systems A A WARNINGS and CAUTIONS When you see any of these symbols on the product or in the documentation carefully read the related information and be alert to the possibility of personal injury and or equipment damage Safety EN 61010 1 1993 EMC EMC Directive 89 336 EEC EN 61326 1998 CISPR22 1993 EN 55022 1988 Class A Conducted and radiated emissions IEC 61000 4 2 1995 ESD Immunity Criterion B 4kV contact discharge 8kV air discharge IEC 61000 4 3 1995 Radiated RF Immunity Criterion A 10V m 80MHz to 1000MHz 80 AM at 1kHz TEC 61000 4 4 1995 Electrical Fast Transient Burst Immunity Criterion B 1kV bursts IEC 61000 4 6 IEC 61000 4 11 1996 Conducted Disturbance Immunity Criterion A 1VRMS 150kHz to 80MHz 80 AM at 1kHz 1994 Voltage D2. ips Interruption Immunity Place Date Signature Full Name Position European Contact Cleveland Ohio U S A 06 30 04 loud fillols Paul Wittibschlager Director of Hardware Engineering To maintain the safety emission and immunity standards of this declaration the following conditions must be met x gt Note The host computer peripheral equipment power sources and expansion hardware must be CE compliant Equipment must be operated in a controlled electromagnetic environment as defined by British Standard EN 61326 1997 or IEC 61326 1997 T O cables must be less than 3 meters 9 75 feet in length and shielded with the shields connected to P1 P2 or P3 connector Jackscrews Part number CA 242 or CA 242 7 must be used for the Ethernet patch cable Shielded cables IOtech p n CA 143 7 CA 255 xT or CA 143 18 must be used when connecting the P1 P2 and P3 connectors to DBK products All wires connected to the DaqLab front panel must use shielded terminal blocks These are available in p n DAQLAB CE KIT All cable shields must be connected to earth ground DaqLab and DaqScan chassis must be properly grounded to earth ground through the power entry module AC input ESD safe handling guidelines must be used when handling installing or transporting DaqScan or DaqLab products ESD safe handling guidelines must be used when transporting DBK cards as well as when installing them into or removi
3. ng them from a DaqLab device The user must observe all Warnings Cautions and operating conditions as specified in the DagScan 2000 Series User s Manual p n 1126 0901 or DagLab 2000 Series User s Manual p n 1125 0901 as applicable Power must be off and disconnected from the host PC and all external connected equipment before accessing a DaqScan or DaqLab Series device Data acquisition equipment may exhibit noise or increased offsets when exposed to high RF fields gt 3V m or transients
Download Pdf Manuals
Related Search
DaqLab/2001