SY-7VCA-E Motherboard Quick Start Guide
Contents
1. SY 7VCA E Motherboard Quick Start Guide soyo SY 7VCA E Motherboard Socket 370 for Via Cyrix Intel PIII amp Celeron processors VIA VT82C694X AGP PCI Motherboard 66 100 133 MHz Front Side Bus supported ATX Form Factor Copyright 2001 bySoyo Computer Inc Trademarks Soyo is the registered trademark of Soyo Computer Inc All trademarks are the properties of their owners Product Rights All names of the product and corporate mentioned in this publication are used for identification purposes only The registered trademarks and copyrights belong to their respective companies Copyright Notice All rights reserved This manual has been copyrighted by Soyo Computer Inc No part of this manual may be reproduced transmitted transcribed translated into any other language or stored in a retrieval system in any form or by any means such as by electronic mechanical magnetic optical chemical manual or otherwise without permission in writing from Soyo Computer Inc Disclaimer Soyo Computer Inc makes no representations or warranties regarding the contents of this manual We reserve the right to amend the manual or revise the specifications of the product described in it from time to time without obligation to notify any person of such revision or amend The information contained in this manual is provided to our customers for general use Customers should be aware that the personal computer field is subject to man2. 86 10 6251 0089 FAX 86 10 6251 0311 http Wwww soyo com cn Email soyo public bat net cn KOREA SOYO TECHNOLOGY LTD 3 rd F1 Wonhyo Bldg 46 1 Wonhyoro 3 Ga yongsan Ku Seoul Korea TEL 882 716 2850 FAX 882 704 2619 http Avww soyo co kr Email soyo soyo co kr 23 SY 7VCA E Quick Start Guide Hong Kong Soyo H K Ltd 5C Big Star Centre 8 Wang Kwong Road Kowloon Bay Kowloon HK TEL 852 2710 9810 FAX 852 2710 9078 http www soyo com hk Email soyo hkstar com 24
3. iS gt LL I gt uU 19 SY 7VCA E Quick Start Guide Quick Trouble shoot tips Video no display related issues I built a new computer system using a Soyo board and nothing happens when turning it on no video and no beeps from the PC speaker What is happening and how can it be fixed No screen and no beeps mean that your CPU and motherboard do not work at all It could be that the CPU is not seated correctly or that a component on the M B is grounded shorted with the case Also make sure to check the voltage setting switch 110V 220V on the back of the power supply To isolate the problem do the following 1 Press and hold down on the Ins insert key while turning on the computer until you get video If you do not get video then 2 Double check jumpers setting on you motherboard and remove all add on cards unplug all hard disk and floppy disk drive cables and see if you can hear some beeps If you still do not get any beeps then try putting the motherboard on the table to isolate it from the case with the CPU and speaker only and give it one more try I hear a series of beeps and I do not get anything from my monitor What could be wrong The following lists some basic beep codes and their possible meanings o One long beep and 3 very short beeps The video card is not detected by the motherboard Please re seat your video card If you are using an AGP card please push your AGP car
4. Features Set Date Time and Floppy drive type then set Hard Disk Type to Auto Step 2 Select Load Optimized Defaults Select the Load Optimized Defaults menu and type Y at the prompt to load the BIOS optimal setup Step 3 Select Soyo Combo Feature Move the cursor to the CPU Frequency field to set the CPU frequency The following table shows all available CPU Frequency settings on your SY 7VCA E Motherboard If you set this field to Manual then you will be required to fill in the next two consecutive fields 1 the CPU Host PCI Clock and 2 the CPU Ratio CPU Frequency MHz Ln 667MHz 66 x 10 0 600MHz 133 x 4 5 0 Manual 700MHz 66 x 10 5 666MHz 133 x 5 0 400MHz 66 x 6 0 500MHz 100 x 5 0 733MHz 133 x 5 5 433MHz 66 x 6 5 550MHz 100 x 5 5 1 800MHz 133 x 6 0 LJ 466MHz 66 x 7 0 600MHz 100 x 6 0 866MHz 133 x 6 5 500MHz 66 x 7 5 650MHz 100 x 6 5 933MHz 133 x 7 0 533MHz 66 x 8 0 700MHz 100 x 7 0 L 1000MHz 133 x 7 5 566MHZ 66 x 8 5 750MHz 100 x 7 5 119GHz 133 x 8 5 600MHz 66 x 9 0 800MHz 100 x 8 0 Ll 633MHZ 66 x 9 5 850MHz 100 x 8 5 Select the working frequency of your Via Cyrix Intel Pentium III Celeron processor among these preset values Note Mark the checkbox that corresponds to the working frequency of your Pentium IIl Celeron processor
5. Motherboard Users Guide that came with your Motherboard Unpacking When unpacking the Motherboard check for the following items Aag The SY 7VCA E VT82C694X AGP PCI Motherboard NR This Quick Start Guide i DI The Installation CD ROM ees 5010 Bonus Pack CD ROM O wi One IDE Device ATA 66 Flat Cable sag bu One Floppy Disk Drive Flat Cable ae SY 7VCA E Quick Start Guide SY VCA E Motherboard Layout PS 2KB PS 2 Mouse Connector Connector 4 U o o 4 en J s pe foot Etro Pin i i palay e o ER i 8 S ege 3 13 AGP Slot EDITT EDDIE y dipa Via VT82C686B JP10 317 771 SIRCON 1 5 Lithiu mgawa 6 attery Power Speaker 7 ISA Slot LI LI taf Reset PWRBT STRHD LED LED VV ON ON SY 7VCA E Quick Start Guide o Key Features m Supports Intel processors gt Supports onboard hardware monitoring lis FSB 66MHz Celeron 400 700MHz FSB 100MHz Pentium Ill 500 gt Supports suspend to RAM STR 2 850MHz gt M FSB 133MHz Pentium Ill 533MHz SUPROT MUIM
6. in case the CMOS configuration should be lost Step4 Select SAVE amp EXIT SETUP Press Enter to save the new configuration to the CMOS memory and continue with the boot sequence 11 SY 7VCA E Quick Start Guide 4 The SOYO CD SOYO CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT Your SY 7VCA Motherboard comes with a CD ROM labeled SOYO CD The SOYO CD contains 1 the user s manual file for your new Motherboard 2 the drivers software available for installation and 3 a database in HTML format with information on SOYO Motherboards and other products Step 1 Insert the SOYO CD into the CD ROM drive The SOYO CD will auto run and the SOYO CD Start Up Menu will be as shown If you use Windows NT the SOYO CD will not detect your motherboard type In that case the following dialog will pop up please choose your motherboard and press OK Now the SOYO CD Start Up Menu will be shown Please Select Your Board LI 7000 7IWB 7IWB V1 0 7IWM 7IWM L V1 gt Cancel SOYO CD Start Up Program Menu If you use Windows 95 or 98 the SOYO CD Start Up Program automatically detects which SOYO Motherboard you own and displays the corresponding model name 12 SY 7VCA E Quick Start Guide The user s manual files included on the SOYO CD are in PDF Postscript Document format In order to read a PDF file the appropriate Acrobat Reader software mus
7. support page of one of the SOYO websites Taiwan WWw soyo com tw and look up your motherboard to find the latest BIOS revision Hard disk floppy drive CD ROM etc When I boot up my new computer I got floppy boot failure and the LED on the floppy stays on Make sure the red wire of floppy ribbon cable goes to Pin on the floppy drive side don t trust the key lock or notch and use the end connector of the cable don t use middle one Modem issues I get an T O Conflict message when I turn on my system and I can not get my modem to work What you need to do is to disable COM2 or UART2 or serial port 2 in the bios under integrated peripheral setup I have installed my modem drivers several times and I still cannot get my modem to work Why If you are sure that the modem driver has been installed correctly then you need to install the south bridge driver from the SOYO CD this is because Windows does not properly recognize relatively new chipsets 21 SY 7VCA E Quick Start Guide Audio Issues I do not get any sound from my sound card What could be wrong Please make sure the speaker is connected to the speaker out port on your sound card In Device Manager I keep getting yellow exclamation signs on my sound port even though I have installed my sound driver several times and I could not get my sound card to work What is wrong It is likely that you did not have the correct driver installed If you are sur
8. E DOC RNE 1 13GHz gt Supports SOYO Wizard On Hand Supports Via Cyrix processors FSB 100MH2 Cyrix IIl SOOMHz WOH function 600MHz gt 5x 32 bit bus master PCI slots FSB 133MHz Cyrix 111 533MHz gt 600MHz 1 x 16 bit ISA slot Supports 66 100 133 MHz Front Side gt 1Xx64 bit AGP slot Bus F Paa gt 4xUSB ports onboard A uto detect CPU voltage amp 5 USB1 2 Ports USB2 2 Ports Easy CPU settings in BIOS with the SOYO COMBO Setup gt ATX power connector PC99 ACPI gt a to handle Y2K Century Ultra DMA33 66 100 ATA 33 66 100 Supports Wake On LAN WOL Power on by modem and RTC alarm SY 7VCA E Quick Start Guide 2 Installation CAUTI RN To avoid damage to your Motherboard please follow these simple rules while handling this equipment Before handling the Motherboard ground yourself by touching on to an unpainted portion of the system s metal chassis ug KO or s2 ER aps Remove the Motherboard from its anti static packaging Hold the motherboard by the edges and avoid touching its components Check the Motherboard for damage If any chip appears to be loose press carefully to seat it firmly in its socket Follow the directions in this section which is designed to guide you through a quick and correct method to install your new SY 7VCA E Motherboard For detailed information please refer to the SY 7VCA E Motherboard User s guide and Technical Reference onli
9. PU SPEED PCI Bus AGP Clock CPU SPEED 9998 Speed Adjustment AUTO Mode WDT 10 sec Defi Search Count 0 I unnmb a Auto Search Max Speed Enter New Speed User s Settings iS o 4 oO iS gt LL I gt uU MANUAL Mode Max Searched Speed OPTIMAL Speed 161 9 MHz 1357 MHz SOYO System Speed Utility High Speed Model Rev 1 0 ar 17 BG o gt 5 72 SY 7VCA E Quick Start Guide Save as OPTIMAL Speed Save the current speed as Optimal speed Load OPTIMAL Speed Load the optimal speed value to the system Save as Max Speed Save the current speed as max searched speed Load Max speed Load the max searched speed to the system E SOYO System Speed Utility 18 SY 7VCA E Quick Start Guide SDRAM speed This settings should be the same settings on the CMOS setup Watch Dog Timer The default time is 15 secs and the maximum time is 30 secs Set Fallback Frequency The Fallback Frequency is the system FSB setting once the system hangs and reboot due to overclocking The default fallback frequency will depend on the current FSB of the CPU If the system is using a Celeron CPU the default fallback frequency will be 66MHz The user can also manually change the fallback frequency Fallback Frequency Selection Please choose the FALLBACK frequency 133 3 v MHz iS o 4 oO
10. can become active Step 3 Check the Latest Releases Click the Check the latest Releases button to go the SOYO Website to automatically find the latest BIOS manual and driver releases for your motherboard This button will only work if your computer is connected to the internet through a network or modem connection Make sure to get your modem connection up before clicking this button Internet Explorer is a Microsoft Trademark 15 25 z N m 9 e c LL SY 7VCA E Quick Start Guide 5 wizard on Hand Utility With SOYO s Wizard on hand utility now user can overclock the CPU without entering the CMOS setup The System Speed Utility also provide a user friendly interface for first time overclockers Warning SOYO will notbe responsible for any damage done to the CPU due to overclocking The system might become unstable overclocked if this happens please shutdown the system E SOYO System Speed Utility PIG KI File Setup Tools Help amp SOYO COMPUTER INC IG seva Current Speed MHz Expected New Speed CPU FSB 1558 CPU FSB PCI Bus 385 PCI Bus SbRAMClck 208 SDRAM Clock AGP Clock AGP Clock CPU SPEED CPU SPEED Speed Adjustment AUTO Mode MANUAL Mode WDT 10 sec befaulr SO Search Count o Auto Search Max Speed User s Settings Max Searched Speed OPTIMAL Speed 161 9 MHz 195 A Hz SOYO Syst
11. d down real hard You may have to push VERY hard without the AGP card mounting screw Make sure not to insert the card the other way around e Continuous beeps more of the memory modules is not seated correctly in its socket My PCI VGA card works fine with my system but when I put in a new AGP card it does not give me any video Is my AGP slot bad This is acommon problem with AGP video cards The reason is that your AGP card did not get seated into the AGP slot fully and firmly Please push your AGP card down into the socket real hard it should snap twice You may have to unscrew 20 SY 7VCA E Quick Start Guide the AGP card to allow the card to go further down Do take care not to damage the card by using too much force I get distorted video my AGP card right after I save my bios Why is that The cause is likely that your AGP card is not running at the correct bus speed To fix this please clear the CMOS via JP5 and if it still does not work please upgrade your motherboard bios to the latest version BIOS Issues Where can I find the BIOS revision of my mainboard It will be displayed on the up left corner on the screen during boot up It will show as your board type followed by the revision number such as SEH_2CA1 meaning revision 2 1 for the SY 5EH board or 6BA IV 2AA2 which means SY 6BA IV motherboard with 2AA2 bios Where can I find the latest BIOS of my motherboard Please go to the technical
12. e that the correct sound driver has been installed then please install the via 4 in 1 driver for the motherboard The sound is working in my system but when I play CD music from the CD ROM I do not get any sound What is wrong This is because the 3 wire audio cable from the CD ROM to the sound card is not connected or it is loose The sound from my sound card is distorted when Windows starts What is wrong First if you are using an ISA sound card please make sure the IRQ needed for the sound card is set to Legacy ISA in the bios In other words if your ISA sound card takes IRQ5 then set IRQS to Legacy ISA Next install the via 4 in 1 driver for the motherboard The sound and everything else works fine except that the recorder and microphone do not work What is wrong This is because the recorder and microphone in the Windows are not enabled Please go to sound properties and enable them Lock up freeze When I boot up my system everything works fine It sees my CPU and memory detects my hard drive floppy drive and CD ROM but locks up at Verify DMI pool data and it won t go any further What should I do Please clear the CMOS via JP5 then choose load optimized default in the bios and save the bios and exit Next unplug all other add on cards except the video card and floppy drive controller and see if it can boot from floppy Then put back the peripherals one by one to identify which one causes the loc
13. em Speed Utility High Speed Model Rev 1 0A Current Speed MHz Display the current speed settings of your system Expected New Speed MHz Display the proposed changes in your system 16 SY 7VCA E Quick Start Guide Watch Dog Timer WDT Time set to reboot when the system hang up due to overclocking The default is 15 secs Auto Search Max Speed The utility will help you determine the maximum allowable speed of the system it will increment 1MHz at a time until your system reaches the maximum allowable speed then the system will freeze and reboot Then the speed value will be stored as the max searched speed Manual Mode Adjust the FSB speed manually by moving the bar and then click the enter new speed It is recommended to increment the FSB little by little Max Searched Speed The maximum allowable FSB speed for the system The current speed value can be save as the max searched speed by loading the save as max speed under the file menu Optimal Speed This settings is set by the user depending on the value the user see fit as the fail safe overclocked speed To make the current speed as optimal speed go to file and click save as optimal speed CG SOYO System Speed Utility Pila x File Setup Tools Help Save As OPTIMAL Speed Load OPTIMAL Speed OMPUTERING Save As Max Speed Expected New Speed MHz Load Max Speed CPU FSB Exit SDRAM Clock AGP Clock C
14. ity if the user over clocks the system Any malfunctions due to over clocking are not covered by the warranty CMOS Clear J P5 In some cases the CMOS memory may contain wrong data follow the steps below to clear CMOS memory 1 Clear the CMOS memory by momentarily shorting pin 2 3 on jumper J P5 This jumper can be easily identified by its white colored cap 2 Then put the jumper back to 1 2 to allow writing new of data into the CMOS memory CMOS Clearing Clear CMOS Data Retain CMOS Data Short pin 2 3 for Short pin 1 2 to J P5 Setting atleast 5 seconds to retain new settings clearthe CMOS 123 123 Note You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation 10 SY 7VCA E Quick Start Guide 3 Quick BIOS Setup This Motherboard does not require any hardware jumpers to set the CPU operating frequency Instead CPU settings are software configurable through the BIOS Soyo Combo Feature The Soyo Combo Feature menu combines the main parameters that you need to configure your system They are all in one menu to enable a quick setup in BIOS After completion of hardware installation turn the power switch on then press the lt DEL gt key while the system diagnostic is checking to enter the Award BIOS Setup program The CMOS SETUP UTILITY will be displayed on screen Then follow these steps to configure the CPU settings Step 1 Select Standard CMOS
15. kup If you are running a Cyrix CPU make sure the linear burst function is enabled in the bios I can not get my board to run properly Please make sure you have the latest bios and driver from the SOYO web site at http www soyo com 22 SY 7VCA E Quick Start Guide How to contact us fyou are interested in our products please contact the SOYO sales department in the region you live require Technical Assistance please contact our Technical Support in the region you live SOYO prefers Email as communication medium remember to always ada to the email the country that you live in TAIWAN SOYO COMPUTER INC No 21 Wu Kung 5 Rd Hsin Chuang City Taipei Hsien Taiwan R O C TEL 886 2 22903300 FAX 886 2 22983322 http Avww soyo com Email info mail soyo com USA SOYO INC 41484 Christy Street Fremont CA 94538 USA TEL 1 510 226 7696 FAX 1 510 226 9218 http Awww soyousa com Email sales soyousa com GM SOYO Deutschland GmbH SAAT Technology GmbH August Wilhelm Kuhnholz Str 15 D 26135 Oldenburg Oldb Germay TEL 49 441 209 100 FAX 49 441 203 442 Email sales soyo de JAPAN SOYO COMPUTER SOYO BLDG 1 23 14 Hyakunincho Shinjyuku ku Tokyo Japan 169 0073 TEL 81 3 3368 2188 FAX 81 3 3368 2199 Email support soyo co jp CHINA GING MEI JEI LTD Room 304 Phoenix Mansion No 165 Haidian Road Haidian Distnct Beijing 100080 China TEL
16. ne manual on in the CD ROM package that came with your Motherboard Gather and prepare all necessary components to complete the installation successfully Socket370 processor with built in CPU cooling fan boxed type SDRAM module s Computer case with adequate power supply unit Monitor PS 2 Keyboard Pointing Device PS 2 Mouse Speaker s optional Disk Drives HDD CD ROM Floppy drive External Peripherals Printer Plotter and Modem optional Internal Peripherals Sound card Modem and LAN cards optional Se 0 eooo SY 7VCA E Quick Start Guide Install the Motherboard To perform the installation of your new SY 7VCA E Motherboard follow the steps below Step1 CPU Installation Mark your CPU Frequency Record the working frequency of your CPU that should be clearly marked on the CPU cover FSB 66MHz L 400MHz 66x60 L 466MHz 66x7 0 L 1533 2 66 80 LJ 600MHz 66x90 LI 667MHz 66x100 L 433MHz 66x65 L 500MHz 66x75 L1566MHz 66x85 LJ 633MHz 66x95 1 700MHz 66 105 FSB 100MHz LI 500492 100 50 LI 600MHz 100x60 LI 700MHz 100x7 0 1 800MHz 100x80 1 550MHz 100x55 650MHz 100x65 750MHz 100x75 L 850MHz 100x85 FSB 133MHz L 533MHz 33x40 667MHz 33x50 800MH2 133x60 933MHz 33x70 L 1 13GHz 133x 85 L 600MBz 133x45 733MH2133x55 866MHz 33x65 1000MHz 133x75 _ CPU Mount Pr
17. ocedure To mount the Pentium amp Celeron processor amp VIA Cyrix processor that you have purchased separately follow these instructions Liftthe socket handle up to a vertical position Align the blunt edge ofthe CPU with the matching pinhole edge on the socket Seatthe processor in the socket completely and without forcing Then close the socket handle to secure the CPU in place WA Remember to connect the CPU Cooling Fan to the appropriate power connector on the Motherboard The fan is a key componentthat stabilizes the system It prevents the equipment from overheating and prolongs the life of your CPU S or 2E E ME em SY 7VCA E Quick Start Guide Step 2 Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard The internal peripherals consist of IDE devices HDD CD ROM Floppy Disk Drive Chassis Fan Front Panel Devices STR LED Internal Speaker Reset Button and IDE LED Switch Wake On LAN card VGA card Sound Card and other devices os For more details on connecting internal and external peripherals to your new SY 7VCA E 2 Motherboard please refer to SY 7VCA E Motherboard User s Guide and Technical E S Reference online manual on the CD ROM m Connectors and Plug ins x Wake On LAN Header J P10 Standard IrDA Infrared Device Heade
18. ockets Therefore the following table applies Suspend to RAM Normal Operation Power Off STR LED BLINKING ON OFF Step 3 Configure Memory Your board comes with three DIMM sockets providing support for up to 1 5GB of main memory using unbuffered and registered DIMM modules from 8MB to 512MB On this motherboard DRAM speed can be set independent from the CPU front side bus speed Depending on the DRAM clock speed setting in the BIOS setup appropriate memory modules must be used For 66MHz DRAM speed use PC66 memory for 100MHz DRAM speed use PC100 memory for 133MHz DRAM speed use PC133 memory Memory Configuration Table Number of Memory Modules RAM Type SDRAM VCM SDRAM po ot 2E Memory Module Size MB 8 16 32 64 128 256 512 MB Note Always install memory modules in the order prescribed in this table SY 7VCA E Quick Start Guide Step 4 Ratio Adjustment setting RJ 1 Refer to the following table to set the Frequency Multiplier of your CPU Configure the RJ 1 jumper to the settings that match your CPU speed 1 2 3 4 Off On Off Off c On On On On vo On Off On On CES On Off Off On Off On On On S Off On Off On LE Off Off On On a Off Off Off On On On On Off On On Off Off On Off On Off On Off Off Off Off On On Off Note SOYO does not guarantee system stabil
19. r SIRCON Pinl Pin2 Pin3 Pinl Pin2 Pin3 Pin4 Pin5 5V SB GND MP Wakeup VCC NC IRRX GND USB2 PORT1 USB2 PORT2 Pinl Pin2 Pin3 Pin4 Pin5 Pin7 Pin8 Pin9 10 VCC Data Datat GND NC VCC Data Datat GND GND CPU Cooling Fan CPUFAN Chassis Fan CHAFAN Pinl Pin2 Pin3 Pinl Pin2 Pin3 GND 12V SENSOR GND 12V SENSOR ka aa LED maga eaker PowerLED Pinl Pin2 Pin3 Tr HERE 5V NC GND a T Speaker Pinl Pin2 Pin3 Pin4 A Br pi 18 nS LED 5y NC NC Speaker out HDD LED STRLED PWRBT RESET Pinl Pin2 Pinl Pin2 Pinl Pin2 Pinl Pin2 LED Anode LED Cathode LED Anode LED Cathode Power On Off GND Power Good GND ATX Power On Off PWRBT Connect your power switch to this header momentary switch type To tum off the system press this switch and hold down for longerthan 4 seconds ATX Power Supply ATX PW Attach the ATX Power cable to this connector This motherboard requires an ATX power supply an AT power supply can NOT be used When using the Power On by PS 2 Keyboard function please make sure the ATX power supply is able to provide atleast 720mA on the 5V Standby lead 5VSB in order to meet the standard ATX specifications SY 7VCA E Quick Start Guide Re The STR LED is connected to the Voltage that feeds the DIMM s
20. t be installed in your system Read the manual Note The Start Up program automatically detects if the Acrobat Reader utility is already present in your system and otherwise prompts you on whether or not you want to install it You must install the Acrobat Reader utility to be able to read the user s manual file Follow the instructions on your screen during installation then once the installation is completed restart your system and re run the SOYO CD Step 2 Install Drivers and Utilities Click the Install Drivers button to display the list of drivers software that can be installed with your Motherboard The Start Up program displays the drivers available for the particular model of Motherboard you own We recommend that you only install those drivers 13 SY 7VCA E Quick Start Guide driver revision VIA 4 in 1 Driver Package for Win 9x ME NT 2k VIA hardware monitor for Win 9x ME Soyo system speed utility for Win 9x ME Cancel Driver Installation Menu A short description of all available drivers follows gt 4in1 Driver Package Win 9x ME NT 2k The 4 in 1 Driver Package includes all drivers your motherboard needs After selecting this Driver Package one driver will be installed automatically the IRQ remapping utility the other three are installed if selected By default all three drivers are selected A description of the 4 drivers follows Bus Master PCI IDE Driver This driver
21. will speed up the data transfer rate to and from the harddisk AGP VXxD Driver This driver must be installed in order to be able to make use of the on board AGP Video functionality VIA Chipset Functions Registry This driver will make the necessary changes to the Windows registry in order to make sure that Windows has no problems recognizing your VIA chipset IRQ remapping utility This driver is installed automatically This utility will remap the IRQ lines to make sure that everything functions properly under Windows gt hardware monitor for Win 9x ME Your motherboard comes with a hardware monitoring IC By installing this utility Temperature Fan speed and Voltages can be monitored It is also possible to set alarms when current system values exceed or fall below pre set values gt Soyo system speed utility for Win 9x ME Select this Item and click OK to start up the Soyo system speed utility screen Follow the instructions on the screen to install the utility and or application programs you 14 SY 7VCA E Quick Start Guide need refer detail instructions on page 16 Select which driver you want to install and click OK or click Cancel to abort the driver installation and return to the main menu Note Once you have selected a driver the system will automatically exit the SOYO CD to begin the driver installation program When the installation is complete most drivers require to restart your system before they
22. y patents All of our customers should ensure that their use of our products does not infringe upon any patents It is the policy of Soyo Computer Inc to respect the valid patent rights of third parties and not to infringe upon or to cause others to infringe upon such rights Restricted Rights Legend Use duplication or disclosure by the Government is subject to restrictions set forth in subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at 252 277 7013 About This Guide This Quick Start Guide can help system manufacturers and end users in setting up and installing the Motherboard Information in this guide has been carefully checked for reliability however to the correctness of the contents there is no guarantee given The information in this document is subject to amend without notice For further information please visit our Web Site on the Internet The address is http www soyo com tw 7VCA E Serial Version 1 1 Edition May 2001 These specifications are subject to amend without notice 2 SY 7VCA E Quick Start Guide 1 Introduction e n o n Congratulations on your purchase of the SY 7VCA E Motherboard This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard This guide provides all users with the basic steps of Motherboard setting and operation For further information please refer to the SY 7VCA E
Download Pdf Manuals
Related Search