POD-X1 – User Manual - Montana Satellite Services
Contents
1. Operating temperature 0 C 60 C E FAQ Q How do you turn off the POD X1 A The POD X1 will power off automatically when charging is complete or no power is drawn Q How many times can it fully charge my mobile phone A At least 4 times for the iPhone 4 Q How long will the POD X1 take to fully charge my mobile phone A Approx 1 hour Q How many times can the POD X1 start the vehicle when fully charged A Approx 20 times Q How long will the POD X1 s charge last A 6 12 months however we suggest you recharge it every 3 months F TROUBLE SHOOTING Problem Cause Remedy No response when Low voltage protection of Jump Plug the adaptor into the press the switch Starter is started 12V 1A input port to button activate G TOXIC AND HARMFUL SUBSTANCES Composition and amount of toxic and harmful substances in Jump Starter Pb Hg Cd Cr V1 PBB PBDE O O O O O O O Indicate all homogeneous materials hazardous substances content are below the MCV limit specified in the Standard 2002 95 EC RoHs ey H Warning 1 Securely fasten the blue plug into the jump start socket when jumpstarting a vehicle If not secured it will not jump start the vehicle and will even make the socket melt 2 Check that the battery clamps have a good connection whether the battery con2. POWER ON DEMAND USER MANUAL Thank you for choosing the POD X1 Jump Starter Always follow basic safety precautions when using electrical appliances Read all instructions carefully Please keep this instruction manual for easy reference Model POD X Place serial number sticker here To register your POD go to thepodx com A PRODUCT LAYOUT Jump start socket Indicator light SSS Switch LED illumination USB5V 2A Output 12V 1A Input a N Home adaptor Car adaptor 6 T L B OPERATION GUIDANCE Indicator Lights Press the switch button to check the capacity of the POD X1 Indicator lights 1Flashing 1 solid 2 solid 3 solid 4 solid Battery capacity 0 25 50 75 100 When charging indicator lights will flash one by one The number of solid indicator lights indicates the battery capacity of the POD X1 Full indicator lights are solid when charging is completely charged 2 Charging the POD X1 1 Plug the home adaptor into the universal socket 2 Connect the 12V 1A input port of POD X1 to the other end of the home AC outlet Or 1 Plug the car adaptor into the socket of cigarette lighter 2 Connect the 12V 1A input port of POD X1 to the other end of the car adaptor To jump start 12V vehicles 1 Make sure that the number of indicator light is
3. efects in material and workmanship for a period of 3 years from the date of purchase by the end user consumer The conditions of the warranty are as follows 2 The warranty is only valid upon presentation of the original receipt from dealer retailer by the original purchaser with the product to be repaired or replaced 3 The warranty is void if the serial number date of purchase and label has been removed 4 The warranty does not cover damage or product failure resulting from normal wear and tear physical abuse improper installation misuse modification or repairs by unauthorized third parties 5 We do not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure 6 We are not liable for any incidental or consequential damages arising from the use or misuse of this product 7 All warranty claims are limited to repair or replacement of the defective product and at the sole discretion of us 8 lf we repair or replace the product the product will be covered for the remaining time of the original warranty period Repair or replacement may involve the use of reconditioned units which are equivalent in function Replaced part or product becomes the property of us g Overcharge and Overdischarge Protection Applied Standard GB T 18287 2000 C FC Jf AP RoHS 7 Fuse Protection Against reverse Plug
4. nector is rusted dirty if the vehicle can not be started Jump start again after cleaning Do not continue to jump start after 3 unsuccessful attempts otherwise it will damage the POD X1 Check the vehicle for other reasons 3 Remove the product from the vehicle within 30 seconds of starting the vehicle 4 Do not connect the two clamps together 5 Do not dispose the product Always use caution when using the POD X1 This appliance is not intended for use by young children elderly mentally challenged persons without supervision Do not use as a toy Do not allow the POD X1 to become wet Do not immerse the POD X71 in water Do not operate the POD X1 in an explosive atmosphere such as in the presence of flammable liquids gases or dust Do not modify or disassemble the POD X1 Only a repair technician may repair this unit Do not expose the POD X71 to heat Do not store in locations where the temperature may exceed 90 F Charge only at ambient temperatures between 40 F and 80 F Charge only using the charger provided with the POD X1 Under extreme conditions battery leakage may occur Carefully wipe the liquid off using a cloth and avoid skin contact In case of skin or eye contact rinse immediately with clean water and seek medical attention Always discard the battery appliances with due care for our environment 990 VOLO I WARRANTY INFORMATION 1 We offer a limited warranty for this product against any d
5. not less than 3 2 Plug the jumper cable s cord into the jump start socket 3 Connect the red battery clamp of jumper cable to the vehicle s positive battery terminal and connect the black battery clamp of jumper cable to the vehicle s negative battery terminal 4 Start the vehicle 5 When the vehicle starts remove jumper cable from vehicle battery terminals within 30 seconds 6 Leave the vehicle s engine running Charging mobile phone or tablets 1 Plug the switch cable B to USB 5V 2A output port 2 Select appropriate connector for your mobile phones or tablet and connect it to the switch cable B and your mobile phone or tablet 3 Press the switch button to charge LED illumination Press the switch button 3 seconds to start the LED illumination and then 4 modes of LED light appear in sequence normal strobe SOS off if you press lightly C PARTS LIST Parts Name Quantity Parts Name Quantity 1 Main product 1 5 Car adaptor 1 2 Switch cable 1 6 Jumper cable with battery clamps 1 3 Mobile phone connector 4 7 User Manual 1 4 Home adaptor 1 D TECHNICAL SPECIFICATIONS Size 131 75 25mm Weight 225g Output 5V 2A 12V Jump Start Input 15V 1A Full charging time 3 hours Starting current 200A Peak current 400A
Download Pdf Manuals
Related Search