User manual for MAG-2 - TS
Contents
1. MAG 2 Digital Recorder OPERATION MANUAL Version Feb 2013 TS Market Contents Introductiori ns Description and specifications OVGTIOOK entrent Recorder s appearance Technical Characteristics Design and operation Recorder settings Operations Transportation sinusini Introduction This User Manual covers the MAG 2 digital audio recorder Precautions Do not let water dew or dust on the recorder Do not leave the recorder under direct sun light Do not open the recorder housing The recorder cannot be repaired by the user Avoid strong electromagnetic fields Before use fully and attentively read this Manual Description and specifications Overlook The MAG 2 digital recorder is designed for recording high quality audio to the built in flash memory Recorded files can be downloaded to a PC for further processing The recorder has small dimensions long recording time and sensitive microphone with wide dynamic range Solid metal case protects from mechanical damage and reduces effect of electromagnetic noise The MAG 2 can record from Built in microphone External microphone Microphone with amplifier Linear input Voice Activation System VAS allows saving significantly internal memory The recorder also has real time clock and calendar USB interface allows2. changing recorder settings and saving recorded audio as wav files to a PC The recorder has control buttons and LED indication of operation modes Recorder s appearance Multifunctional jack Cen be internal micraphone used as linear input or for connection of extemal microphone or microphone Green red LED with amplifier Ji USB port Technical Characteristics Memory size Gb 1 Sampling rate kHz 12 24 Bit rate bit 16 Recording time hours sampling rate 12 kHz 12 sampling rate 24 kHz 6 Dynamic range dB 80 Current consumption Recording mode no more than mA 6 stand by mode no more than mA 200 Battery mAh Li Po 105 Dimensions mm 49x26x9 Weight g 20 Design and operation Recorder settings Switch the recorder on by moving the switch to position The recorder settings are made with the NOVO PC SUIT MAG 2 software The software must be installed and the recorder must be connected to USB port of your PC with the supplied cable The software allows Saving recorded files to a PC Turning on and setting VAS Adjusting quality of recording Selecting source of recording internal or external microphone linear input Synchronizing time and date of the recorder and PC Operation Please note Every time before use fully charge the battery and synchronize time and date between PC and the recorder or check Automatic synchron
3. he information records into flash memory In case the signal level diminishes the record stops VAS must be adjusted every time before use taking into account specific conditions of premises To set VAS see section Using telephone adapter Charging battery Connect the recorder to USB port of a PC with supplied USB cable At that the LED starts blinking LED color indicates battery charge level green battery is charged more than 50 red battery is charged less than 50 When the battery is fully charged the green LED is on continuously Attention In case of deep discharge the recorder does not react on buttons pressing but if connected to a PC the battery will charge Storage Storage conditions Temperature 10 50 C Relative humidity 80 at 30 C Air pressure from 630 to 800 millimeters of mercury Absence of acid alkali or other aggressive liquids vapors in storage facility Transportation The units can be transported by any mode of transportation according to general requirements to electronic goods transportation When transporting prevent the device from falling and punching In box MAG 2 digital recorder USB cable Telephone adapter optional External microphone Software CD Warranty The manufacturer guarantees no failure operation and all operating characteristics during 1 one year after the date of shipment by the producer provided the customer follows all
4. ization mode To record audio using internal microphone press and hold REC STOP switch button till the red LED lights up for a short time and goes out After that recording starts During recording the red LED blinks with 5 sec intervals To stop recording press and hold REC STOP button till the green LED lights up After that recording stops Recorded audio files can be deleted without connecting the recorder to a PC To do it in stand by mode move and hold REC STOP switch in F2 position till the red LED starts blinking Then immediately move REC STOP switch to F1 position The red LED is on continuously recorded audio is being deleted When the process is over the red LED goes out and the recorder is in stand by mode To find out current status of the recorder move the REC STOP switch to F2 position don t hold The LED is on for several seconds the recorder is in stand by mode at that color of the LED indicates battery charge level green battery is charged more than 50 red battery is charged less than 50 The LED blinks shortly the recorder is recording at that color of the LED indicates battery charge level green battery is charged more than 50 red battery is charged less than 50 ATTENTION If during recording the recorder memory is filled or battery is fully discharged the recorder automatically switches off Operation with external microphone 1 Using NOVO PC SUIT MAG 2 pr
5. ogram select external microphone as a source of recording 2 Connect external microphone to corresponding jack on the recorder 3 To start recording press and hold REC STOP switch button till the red LED lights up When it will go out recording will start Recording is indicated by the red LED blinking with 5 sec intervals 4 To stop recording press and hold REC STOP switch till the green LED lights up When the green LED lights up the recording stops Using telephone adapter 1 Using NOVO PC SUIT MAG 2 program select linear input as a source of recording Set required VAS threshold time of recording start time of reaction on sound in ms and time of recording end time of recording after sound ends in s 2 Using supplied telephone cable to connect the adapter to a telephone line 3 Second jack of the adapter is used for connection to a telephone set Connection is in parallel without taking into account the polarity 4 Connect male plug of the adapter to the recorder jack 5 Recording start stop procedure is the same as described in section Operation Voice Activation System Voice Activation System allows saving memory and energy consumption VAS can be set only through NOVO PC SUIT MAG 2 program When the recording starts the recorder tracks signal level from the microphone or linear input When the signal level is below specified the recording isn t carried out When the signal level is above specified t
6. the rules stipulated in the documentation Mechanical damage deprives the user of the warranty In case the manufacturer is responsible for malfunction or failure of the device it is guaranteed to be fixed or exchanged for free during 30 days after the date of receiving faulty item Warranty does not cover batteries Repairs or replacement of the device in the post warranty period is to be made according to the additional greement TS Market Ltd Building 10 1 Sosnovaya Alleya Zelenograd Moscow The Russian Federation 124489 Tel 7 495 638 88 00 7 499 940 95 75 Cell 7 903 530 10 01 7 909 638 88 00 Fax 7 499 735 04 91 E mail support ts market com www ts market com
Download Pdf Manuals
Related Search