LOGIK Digital TV SCART Adapter
Contents
1. Do not place the unit on sloped or unstable surfaces as the unit may fall off ortip over The mains socket must be located near the unit and should be easily accessible This unit is designed for indoor use only Temperature Avoid extreme degrees of temperature either hot or cold Place the unit well away from heat sources such as radiators or gas electric fires Avoid exposure to direct sunlight and other sources of heat 38 LSSTB11 IB 110609 Annie indd 38 Naked Flames Never place any type of candle or naked flame on the top of or near the unit Moisture To reduce the risk of fire electric shock or product damage do not expose this unit to rain moisture dripping or splashing No objects filled with liquids such as vases should be placed on the unit If you spill any liquid into the unit it can cause serious damage Switch it off at the mains immediately Withdraw the mains adapter and consult your dealer Ventilation To prevent the risk of electric shock or fire hazard due to overheating ensure that curtains and other materials do not obstruct the ventilation vents Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure the unit is well ventilated Safety Always disconnect the unit from the mains supply before connecting disconnecting other devices or moving the unit Unplug the unit from the mains socket during a lightning storm Mains Adapter2. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers You will also find some hints and tips to help you resolve any issues Read all the safety instructions carefully before use and keep this instruction manual for future reference Unpacking Remove all packaging from the unit Retain the packaging If you dispose of it please do so according to local regulations The following items are included Infrared Receiver amp Adhesive Pad P N 5080F100001 p The unit Remote Control and Batteries P N 5040F107103 Mains Adapter P N 5140F110108 Instruction Manual Quick Start Guide P N LSSTB11 IB 002 P N LSSTB11 QSG 002 USB Extension Cable P N 30430101502 If items are missing or damaged please contact Partmast Tel 0844 800 3456 for assistance Hr LSSTB11 IB 110609 Annie indd 5 1 F6H H TF Product Overview Rear View Left View Right View gt 1 Scartto TV Connects to TV with SCART input 2 Mini USB Socket Allows the insertion of a USB storage device with a USB extension cable to playback photo and music files Used for upgrading the product s system software purpose amp Do not attempt to service the unit without the appropriate
3. previous image dor Rotate image OK Start slideshow EXIT Close multimedia and exit to live TV broadcasting RED After slide show press the i button to select the Button Function Play Pause in slide show mode GREEN Select music file on your USB flash drive YELLOW Select repeat Once All BLUE Select Fast Middle Slow for the speed of slide show Aov Select next previous image MENU Back to the Thumbnail below features My Music 1 Press the MENU button to enter the MAIN MENU Press the AV buttons and then press the OK button to select Multimedia LSSTB11 IB 110609 Annie indd 33 MAIN MENU Enter Menu 33 Hr F6H H TF 3 Pressthe AW buttons to select My Music and then press the OK button to confirm 4 If you have MP3 files in the root folder they will load and show on screen in the right hand column 5 Press the AW buttons to select an MP3 file and then press the OK button to confirm the selected MP3 music file Or press left button then press the button and then press the MULTIMEDIA AY button to select a different folder in the left hand column After selecting the folder press the P button to the right hand column Press the AW buttons to select the music at this folder Button RED Supported file mp3 The Unsupport Format will show when selec
4. the selected channel 2 Press the AW buttons to move the selected channel to a new position and then press the OK button to save the new position Press the GREEN button to cancel with no change of position 18 LSSTB11 IB 110609 Annie indd 18 MAIN MENU CHANNEL ORGANISER Name Provide CA Please enter PIN to SERVICE ORGANISER ON Name Pro Delete 114 F6H H TF Rename 1 Pressthe YELLOW button to change the favourite list name The EDIT window will display on the screen 2 Press the d AW P buttons to select characters and then press the OK button to choose a character Repeat the same setup until the new name is displayed in the text field Press CAPS to toggle the letters between upper case and lower case Press Delete to backspace delete the last character 3 Press the GREEN button to save the new name and exit the menu Press the YELLOW button to cancel the current edit and return to the previous menu with no name change 19 Hr LSSTB11 IB 110609 Annie indd 19 F6H9H TF Favourites Menu 1 Pressthe MENU button to enter the MAIN MAIN MENU MENU Enter Menu 2 Press the AW buttons and then press the OK FAVOURITES button to select Favourites New Press the GREEN button to add a new favourite Qo Edit a Press the AW buttons to select a favourite list from the FAVOURITES window Press the YELLOW button to edit FAVOURITES b Pressthe AW b
5. 5140F110108 USB Extension Cable 30430101502 Partmaster Visit Partmaster co uk today for the easiest way to buy cok electrical spares and accessories With over 1 million spares and accessories available we can deliver direct to your door the very next day Visit www partmaster co uk or call 0844 800 3456 UK customers only Calls charged at National Rate Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment To preserve our environment dispose of used batteries according to your local laws or regulations Do not dispose of batteries with normal household waste For more information please contact the local authority or your retailer where you purchased the product This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste There are separate collection systems for recycling in the EU For more information please contact the local authority or your retailer where you purchased the product The FREEVIEW word and logo are trademarks of DTV services Ltd and are used under licence ODTV Services Ltd 2002 All trademarks are the property of their respective owners and all rights are acknowledged DSG Retail Ltd Maylands Avenue Hemel Hempstead Herts HP2 7TG England PN LSSTB11 1B 002 Hr LSSTB11 IB 110609 Annie
6. AW buttons to select the desired TV SETUP option and then press the lt P buttons to change the setting Press the OK button to confirm Television Type Select the aspect ratio 4 3 16 9 that this unit is connected to Widescreen Select what the user requires to be displayed for 16 9 transmissions Letterbox Full Frame Note This option is only available when 16 9 format content is transmitted under 4 3 Television Type option Standard Set the SCART output mode CVBS RGB Note Select CVBS to output a standard composite video Select RGB to output a better picture quality amp If selecting 4 3 you have additional settings available to choose between Letterbox and Full Frame There will be two blank bars on the top and bottom of the screen if a 16 9 program is broadcast 5 The standard setting is used to select between RGB and CVBS amp Some older TVs may not support RGB RGB will give you a better picture quality than CVBS and is the default setting 24 LSSTB11 IB 110609 Annie indd 24 1 Hr F6H H TF Parental Control 1 Press the MENU button to enter the MAIN MAIN MENU MENU 2 Press the AW buttons and then press the OK button to select Setup 3 Pressthe AV buttons to select Parental SETUP MENU Control and then press the OK button I 4 APIN window will display on the screen Use the 0 9 buttons to enter 4 digit PIN The default PIN code is 0000 The Parental e
7. Cable Make sure the unit or unit stand is not resting on top of the mains cable as the weight of the unit may damage the mains cable and create a safety hazard If the mains cable is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Hr F6H H TF Interference Do not place the unit on or near appliances which may cause electromagnetic interference If you do it may adversely affect the operating performance of the unit and cause a distorted picture or sound Standby The O button on the remote control does not switch off the unit completely The unit will continue to draw electricity from the mains supply while in standby In the interests of safety and to avoid unnecessary energy consumption never leave the unit in standby while unattended for long periods of time e g overnight while on holiday or while out of the house Switch it off and disconnect the mains adapter from the mains socket Batteries Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control Seek medical advice if you believe a cell has been swallowed Please dispose of batteries correctly by following the guidance in this manual Supervision Children should be supervised to ensure that th
8. F6H H TF 9 Specification Tuner and channel RFinput connector IEC TYPE IEC169 2 female RFoutput connector IEC TYPE IEC169 2 male Decoder Transport stream MPEG 2 ISO IEC 13818 Profile level MAX 15Mbit s Inputrate MPEG 2 Main profile main level Video format 4 3 16 9 Switchable Audio format MPEG Layer amp 11 32 44 1 48KHz Video output RGB CVBS Connection Power 5V Mains adapter Tuner RF input RF output P Video TV SCART Power supply Input voltage AC 100 240V 50 60Hz Mains Adapter Power consumption MAX 6W 5V 1 25A Dimension 168 x 80 x 28mm Weight 80g Features and specifications are subject to change without notice 37 Hr LSSTB11 IB 110609 Annie indd 37 lI 6H9H TF 9 Safety Warnings Read all the instructions carefully before using the unit and keep them for future reference Retain the manual If you pass the unit onto a third party make sure to include this manual Check that the voltage marked on the rating label matches your adapter voltage Damage Please inspect the unit for damage after unpacking Do not continue to operate the unit if you are in any doubt about it working normally or if it is damaged in any way switch off withdraw the mains adapter and consult your dealer Location of Unit The unit must be placed on a flat stable surface and should not be subjected to vibrations
9. setting is set to 3 Hours The unit will automatically switch to standby mode 3 hours after the last time the remote control was used A reminder screen will pop up and count down before the unit switches to standby mode To turn off the auto standby function select OFF on the auto standby setting To save energy you should always turn the auto standby setting back to 3 Hours or 4 Hours 31 LSSTB11 IB 110609 Annie indd 31 Hr F6H H TF 9 Multimedia Menu The multimedia function is used to playback MP3 and JPEG files via a USB drive My Photo 1 Press the MENU button to enter the MAIN MAIN MENU MENU Channel Organis 2 Press the AW buttons and then press the OK button to select Multimedia Enter Mons 3 Press the AW buttons to select My Photo and then press the OK button to confirm gt 4 If you have images in the root folder they will load and show on screen To navigate around the window press the 4 AW P buttons If your USB drive contains many folders press the BLUE button and then press the AY buttons to select a folder included photos 32 Hr LSSTB11 IB 110609 Annie indd 32 F6H9H TF 5 Press the i button after playback a picture you selected Button Function RED Zoom image GREEN Select music file on your USB flash drive YELLOW Flip image horizontally BLUE Flip image vertically Aorv Select next
10. Digital TV SCART Adapter Instruction Manual LSSTB11 LSSTB11 IB 110609 Annie indd 1 14 F6H9H TF LSSTB11 IB 110609 Annie indd 2 11659A TF 9 Content Unpacking Product Overview Rear View Left View Right View Remote Control Installing Batteries in the Remote Control Using the Remote Control Remote Control Operation Range Connections Connecting to the TV Connecting to External AV Equipment Connecting a USB Storage Device Initial Setting Plug In and Switch On First Time Installation Basic Operation Using the EPG Electronic Programme Guide Changing the Channel Changing the Volume Using Subtitles Using Digital Teletext The Info Banner Hr LSSTB11 IB 110609 Annie indd 3 11 6A9A TF Channel Organiser Menu usssenenenenonannnnsnsnnnrnenenenenenanunnnnsnonanensnenenunnsnensnenanananannnnnnnnner 18 Delete Reorder Renam Setup Menu Languages TV Setup Parental Control Service Setup Software Update System Information Auto Standby Setting On 32 My Photo My Music Hints and Tips Specification 37 Safety WarninQS TE 38 LSSTB11 IB 110609 Annie indd 4 Hr F6H H TF Than k you for purchasing your new Logik Digital TV SCART Adapter
11. Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Copelandsuihes on October 37 2007 de The map shows when your area will A switchover to digital When the TV Ber switchover happens in your area there are at least two occasions when you will need to re tune your unit in order A to continue receiving your existing TV channels and also to pick up new ones The exact date you Digital UK the body leading the digital ea a TV switchover will advise you when you px d need to re tune during the switchover o to Digital UK s E postcode checker on y For re tuning instructions for this er y eck your ITV new unit please see page 26 27 of this so eek Tete instruction manual N If you find you can t receive the extra digital channels it may be because your area is not covered by Freeview yet or Visit us at digitaluk co uk call us on 0845 6 50 50 50t that you need an aerial upgrade Visit www digitaluk co uk to check If you have any questions please contact your equipment supplier or call Digital UK on 0845 6 50 50 50 or visit www digitaluk co uk 40 LSSTB11 IB 110609 Annie indd 40 1 Hr F6H H TF NOTE If you require a replacement for any of the items listed below please quote their corresponding part numbers Replacement Part Part Number Remote Control 5040F107103 Infrared Receiver 5080F100001 Mains Adapter
12. cted programme when it starts Ifa reminder has been set your unit will automatically change channel unless you press the EXIT button to cancel the reminder Your EPG also contains digital radio channels 15 Hr LSSTB11 IB 110609 Annie indd 15 F6H9H TF Changing the Channel Press the CH button to select the channel you want to watch Alternatively press the 0 9 buttons 1100 1148 to key in the channel number Press the CH LIST button to enter the channel list and then press the AW buttons to highlight and select the channel Press the OK button to watch When you change the channel the info bar will be displayed for a few seconds Changing the Volume You can change the volume of your unit by pressing the VOL buttons VOL will increase the volume and VOL will decrease the volume To turn the volume off press the M button on the remote control To turn it back on press the iX button again or press the VOL buttons Using Subtitles To use subtitles press the S button on the remote control The subtitle options will be displayed on screen Press the AW buttons to select an available SUBTITLES an subtitle language Press the OK button to select it Subtitles are only shown when they are broadcast with the programme Not all programmes have subtitles Using Digital Teletext Many digital channels also provide digital teletext For example this could be
13. e gt buttons Press the OK button 5 The tuning progress screen will be displayed FULL SCAN REPLACE EXISTIN showing you how many channels have been found and saved Scanning may take several minutes to complete After all available channels have been searched the unit will enter a TV channel automatically to receive programme If you are in an area that can receive more than one TV region you will see the region selection screen Select your preferred region from the list shown and then press the OK button Your unit has now been retuned None LSSTB11 IB 110609 Annie indd 28 1146H9H TF Software Update This function allows you to update the product s system software by USB connection or by OAD setting OAD Over the Air Download means that firmware a products in built software can be sent installed and updated via a TV broadcast and therefore can be received by your unit via the aerial system lo not attempt to service the ui the appropriate technical support 1 Pressthe MENU button to enter the MAIN MAIN MENU MENU 2 Press the AW buttons and then press the OK button to select Setup Channel Organiser Enter Monu 3 Press the AW buttons and then press the OK SETUP MENU button to select Software Update 4 The SOFTWARE UPDATE window will display SOFTWARE UPDATE on the screen Press the AW buttons to lt select Update by USB or Update by OAD y and then press the OK but
14. e Control menu will display on the screen gt The default PIN code is 0000 Change PIN 1 Pressthe AW buttons to select PARENTAL CONTROL Change PIN The CHANGE PIN window will display on the screen O Enom 2 Use the 0 9 buttons to enter numbers in Enter New PIN and Confirm New PIN Press the OK button to confirm 25 LSSTB11 IB 110609 Annie indd 25 1146H9H BE Lock Unlock Services 1 Press the AW buttons to select Lock Unlock Services and then press the OK button 2 Press the CH button to select channels and then the OK button to lock or unlock channels Q The Lock Unlock feature is useful for locking channels that have Adult material so that they can t be viewed without entering the PIN code Service Setup 1 Press the MENU button to enter the MAIN MENU gt 2 Press the AW buttons and then press the OK button to select Setup 3 Pressthe AW buttons to select Service Setup and then press the OK button The SERVICE SETUP window will be displayed Rescan Channel 1 Press the AW buttons to select Rescan Channels and then press the OK button 26 LSSTB11 IB 110609 Annie indd 26 PARENTAL CONTROL Jiu SERVICE SETUP lory Default Enter Menu M6H9H TUE 2 The scanning will be started and replace all the existing services 3 After all available channels have been searched the unit will enter a TV channel automatically to rec
15. e control Firet Tima installation to select the aspect ratio you desire to display after scanning the channels Press the OK button The unit will automatically begin to tune 3 The scanning progress screen will be nn displayed showing you how many channels have been found and saved The tuning may take several minutes to complete When the scanning is complete your unit is ready to use After scanning is complete the channels are arranged in a preset order 14 LSSTB11 IB 110609 Annie indd 14 Hr F6H H TF Basic Operation Using the EPG Electronic Programme Guide 1 The Electronic Programme Guide or MEL EPG is an on screen TV guide It shows 5 all scheduled programmes seven days in advance for every tuned in channel Press the GUIDE button to access the TV GUIDE menu 2 You can press the AW buttons to select a different channel Press the lt P buttons to select the programme and then press the OK button to watch the programme Press the BLUE button to move to the next day s schedule It will exit the TV GUIDE menu and switch to the TV programme 3 Press the GUIDE button to access the TV GUIDE menu again Press the BLUE button to move to the next day s schedule and the c YELLOW button to move to the previous day 4 To set a reminder scroll to a future programme and press the Green button The programme you set will turn green to remind you The unit will automatically tune to the sele
16. ections The USB connection is not for programme recording but only for MP3 JPEG playback Please refer to the section Multimedia Menu for detail Not all the USB devices can be supported by this unit especially some MP3 players digital cameras and external hard drive If a hard disk is used make sure its mains adapter is connected to the mains supply If a USB hub is used make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA The maximum supported storage space of the hard disk is 1TB Disconnect the USB storage device if it is not in use 13 LSSTB11 IB 110609 Annie indd 13 Hr F6H H TF Initial Setting Plug In and Switch On Insert the mains adapter to the side of the unit and plug into a mains socket and switch on The green standby light on the infrared receiver will come on and then go to standby Press the STANDBY button to turn it on Switch your TV on and select the Scart input Ensure that the aerial is connected to your unit before starting the first time installation Please take some time to perform the first time installation when using the product for the first time First Time Installation 1 The first time installation screen will appear lease ensure that the aerial is plugged in on screen Then press the OK button to go your receiver amp to continue to next page 2 Pressthe lt P buttons on the remot
17. eive programme Manual Scan 1 Press the AW buttons and then press the OK button to select the Manual Scan gt 2 Press the AW buttons to select scan services from MANUAL SCAN DIGITAL TERRESTRIAL 3 Press the AV buttons to select the desired option and then press the lt P buttons to change the setting UHF Channel Sets the required UHF channel This will automatically fill in the frequency entry The options are 21 474000kHz 69 858000kHz Frequency Overrides and sets the frequency in kHz Tx Mode Selects the required transmission mode 2K and 8K Guard Interval Selects the required guard interval 1 4 1 8 1 16 and 1 32 Scan Select Started or Stopped to start or stop a service scan 4 Pressthe PAGE button to change the channel in the preview window LSSTB11 IB 110609 Annie indd 27 27 Hr F6H H TF Restore Factory Default 1 Press the AW buttons and then press the SERVICE SETUP OK button to select the Restore Factory Default 2 TheRestore Factory Default screen will appear on screen Press the OK button to select YES Press the EXIT button to select No then return to normal TV viewing 3 After restore factory default setting the first Restore Factory Default time installation screen will display on the o to continue screen Press the OK button to continue the setup 28 4 Select the TV type using th
18. ey do not play with the unit and the remote control Never let anyone especially children push anything into the holes slots or any other openings in the case this could result in a fatal electric shock LSSTB11 IB 110609 Annie indd 39 CAUTION RISK OF ELECTRIC SHOCI DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the manual accompanying the unit Service To reduce the risk of electric shock do not remove screws The unit does not contain any user serviceable parts Please leave all maintenance work to qualified personnel Do not open any fixed covers as this may expose dangerous voltages Maintenance Ensure to unplug the unit from the mains socket before cleaning Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit s surface Do not use liquids to clean the unit 39 Hr F6H H TF get set for digital V How the digital switchover may affect you Television in the UK is going digital bringing us all more choice and new When does switchover happen services
19. he aerial sound Check that the aerial is not broken Press the VOL button or mute on the remote control Remote control Make sure there are no obstructions between the remote control and the unit Replace the remote control batteries if the remote control has lost power Check that the batteries are installed with the correct polarities and Remove any obstacles between the remote control unit and the remote control signal sensor 35 LSSTB11 IB 110609 Annie indd 35 Hr F6H H TF Problem DTV interference Solu n The reception becomes weak under rainy or cloudy weather The effect of the intervening terrain e g mountains and valleys can weaken the quality of signals Place the unit in a flat and open area to get good signal reception Placing the unit nearby tall buildings will cause poor signal reception Placing the unit near the window can improve the signal reception quality Ifthe picture on TV set is only colour bar via SCART cable Select a proper SCART output RGB or CVBS from the TV setup menu in the main menu The unit does not work properly Please restart the unit Lost Password Select the Parental Control setting in the Setup Menu then enter the following master password 1307 The master password clears your previous password and allows you to enter a new password 36 LSSTB11 IB 110609 Annie indd 36 Hr
20. indd 41 lI 6H9H TF LSSTB11 IB 110609 Annie indd 42 1 46H9H TE LSSTB11 IB 110609 Annie indd 43 11659A TF LSSTB11 IB 110609 Annie indd 44 11659A TF
21. information about programmes the weather news and many other topics To use digital teletext press the TEXT button on the remote control Not all channels have digital teletext 16 Hr LSSTB11 IB 110609 Annie indd 16 F6H9H TF The Info Banner 1 The info banner can be accessed when you f NOW 11 are watching a TV programme by pressing the i button The info banner gives you the date and time of the current programme and also shows you the programme name Press the P button to see the details of the next programme If you press the i button again you will be shown extended information about the programme Press the EXIT button to close the info banner and return to normal TV viewing LSSTB11 IB 110609 Annie indd 17 17 Hr F6H H TF 9 Channel Organiser Menu 1 Press the MENU button to enter the MAIN MENU 2 Press the AW buttons and then press the OK button to select Channel Organiser The UHF column shows the frequency channel that the service is on It will only be presented on a terrestrial or cable system Delete Press the RED button to delete channels The PIN window will display on the screen Each time you delete a channel the PIN windows will display on the screen Press the 0 9 buttons to enter PIN number The default PIN number is 0000 Reorder 1 Press the CH button to select a channel and then press the GREEN button to re order
22. n Press to select a channel Vol Vol Button Press to adjust the volume AV Button Allows you to navigate the menus and adjust the system settings to your preference OK Button Press to confirm selection in OSD menu TEXT Button Press to turn on off teletext MHEG 5 function Colour Buttons Red Green Yellow Blue The features of these four coloured buttons are defined on different channels each button will correspond to various coloured page numbers and functions provided by Television broadcasters CH LIST Button Press to display the channel list PAGE PAGE Button Press to go to the previous next page in teletext or some menus LSSTB11 IB 110609 Annie indd 8 13 35 15 37 16 H nn 14 Hr F6H H TF Installing Batteries in the Remote Control 1 Press and lift the battery cover of remote control Insert 2 x AAA size batteries and make sure to match the and ends of the batteries with the and ends indicated in the battery compartment Close the battery cover Handling the Batteries Improper or incorrect use of batteries may cause corrosion or battery leakage which could cause fire personal injury or damage to property Only use the battery type indicated in this manual When the batteries are exhausted the remote will not function Replace both batteries at the same time with new ones Do not install new ba
23. ncluded Infrared Receiver included Connect infrared receiver prior ToRFOUT Y ToRFIN to using remote control Front view of TV 1 Make sure your TV and any other equipment you are connecting to are switched off 2 Connectone end of the RF coaxial cable not supplied to the aerial socket on the wall and the other end of the cable to the RF IN socket of the unit 3 Connect another RF coaxial cable not supplied between the RF OUT socket of the unit and the RF IN socket on your external AV equipment 4 Connect the RF coaxial cable not supplied between the RF OUT socket of your external AV equipment and the RF IN socket on your TV Connect the unit to the SCART IN socket on your TV 6 Connect the supplied mains adapter 5V DC to the DC IN 5V socket of the unit and plug in the mains adapter into the mains socket after you have completed all the connections 12 Hr F6H H TF Connecting a USB Storage Device USB Extension Cable included vB Adapter Portable Hard Disk 1 Make sure your TV and any other equipment you are connecting to are switched off 2 Connect your USB storage device to the USB port of your unit with a USB extension cable Connect the unit to the SCART IN socket on your TV 4 Connectthe supplied mains adapter 5V DC to the DC IN 5V socket of the unit and plug in the mains adapter into the mains socket after you have completed all the conn
24. ndd 10 9 Connections Connecting to the TV Rear view of TV To Aerial IN 7 RF Cable not included Digital TV Tomains To RFIN en Socket RF 750 SCART mmi OO 9 En x OO esa To RFIN To SCARTIN To IR ToDCINSV RF Cable Mains Adapter not included included Infrared Receiver included Connect infrared receiver prior to using remote control Front view of TV 1 Make sure your TV and any other equipment you are connecting to are switched off 2 Connectone end of the RF coaxial cable not supplied to the aerial socket on the wall and the other end of the cable to the RF IN socket of the unit 3 Connect another RF coaxial cable not supplied between the RF OUT socket of the unit and the RF IN socket on your TV 4 Connectthe unit to the SCART IN socket on your TV Connect the supplied mains adapter 5V DC to the DC IN 5V socket of the unit and plug in the mains adapter into the mains socket after you have completed all the connections 11 Hr F6H H TF LSSTB11 IB 110609 Annie indd 11 LSSTB11 IB 110609 Annie indd 12 1 Connecting to External AV Equipment I OR To Aerial IN 7 RF Cable not included Digital TV To mains To RF IN Receiver socket Rear view of TV To SCART IN To To To DCIN 5V RF OUT IR RF Cable not included RF Cable Mains Adapter not included i
25. select it and then press the OK button To turn favourites off select OFF and press the OK button When your favourites list is enabled you can only select the channels that have been added to your favourites list 22 Hr F6H H TF LSSTB11 IB 110609 Annie indd 22 9 Setup Menu The setup menu lets you change the default settings of your unit Languages 1 Press the MENU button to enter the MAIN MAIN MENU MENU 2 Press the AW buttons and then press the OK button to select Setup 3 Pressthe AW buttons to select Languages and then press the OK button option and then press the lt P buttons to change the setting Press the OK button to confirm 4 Press the AW buttons to select the desired LANGUAGES Audio Select the audio channels which are available in DTV mode On Screen Select an available text language to be used in the Display menus and off air service information Not all programmes have alternative audio available and English will be used instead The on screen display setting is always set to English and there are not any other options available LSSTB11 IB 110609 Annie indd 23 23 Hr F6H H TF TV Setup 1 Press the MENU button to enter the MAIN MAINMENU MENU 2 Press the AW buttons and then press the OK button to select Setup 3 Pressthe AW buttons to select TV Setup SETUP MENU and then press the OK button 4 Press the
26. technical support 3 RFIN Connects to an aerial 4 RFOUT Connects to TV s aerial output socket 5 Remote Sensor Receives signals from the remote control 6 DC IN 5V Connector Connects to supplied mains power adapter Hr LSSTB11 IB 110609 Annie indd 6 lI 6H9H TF Remote Control 1 OSTANDEY Button Press to turn the unit to on and standby 2 Button i Press to mute and restore the sound output 3 0 9 Number Button 3 Press to enter values and select the channel directly by entering its number 4 FAV Button Press to switch between your favourite channels 5 TV RADIO Button Press to switch between TV and music programmes 6 AUDIO Button Press to switch between the audio languages only applicable when the TV programme has this feature gt 7 SButton Press to set up the available subtitle 8 iButton Press to display information about the current programme 9 MENU Button SAA Press to display the main menu of the unit 10 GUIDE Button Press to display the EPG Electronic Program Guide 11 EXIT Button Press to exit the main menu of the unit o Od o 9 The device will automatically enter into the STANDBY mode if no operation in 3 hours Press the STANDBY button again to turn the power on The standby reminder will pop up 2 minutes before entering into the STANDBY mode Hr LSSTB11 IB 110609 Annie indd 7 lI 6H9H TF CH CH Butto
27. ted the unsupport file format Function Play Pause the MP3 GREEN Fully stop playback of the MP3 YELLOW Change the repeat mode between Repeat Off Repeat All or Repeat One BLUE Increase the playback speed of the MP3 PP x 1 gt gt x 2 gt gt x 3 then return normal playback See the available and used space on your USB flash drive Aorv Move up and down the column do Swap between left and right columns OK Select to confirm EXIT Close multimedia and exit to live TV 34 LSSTB11_IB_110609_Annie indd 34 Hr F6H9H TE 9 Hints and Tips If a problem does occur it may often be due to something very minor The following table contains various tips Problem Solu No power Check to make sure the mains adapter is plugged into the mains outlet Make sure there is power to the mains socket No pictures Check the aerial connection is connected properly Check the connections between the unit and external equipment Check the power of external equipment is turned on Switch to another channels If their signals are fine it is likely that the problem is from the TV station Unclear or unstable Check that the aerial is connected picture Adjust or move your aerial to a different location gt Adjust from Menu setting to select the correct TV system settings No sound or noisy Check the connection of t
28. ton to enter Enter Menu 9 Some downloads may be signalled as high priority which means the manufacturer of the product wants the user to perform the download via OAD Over the Air Download function provided by the TV broadcast service If a download is not available when manually checking for a download or the download becomes not available then the following menu will be displayed Enter menu 9 After updated the software on the uni will restore factory default mode and the reminder you have set are cancelled 29 Hr LSSTB11 IB 110609 Annie indd 29 F6H9H TF System Information 1 Press the MENU button to enter the MAIN MAIN MENU MENU 2 Press the AV buttons and then press the OK button to select Setup 3 Press the AW buttons to select System SETUP MENU Information and then press the OK button pue to display the DTV information gt Qi The information shown on your screen may differ to the one shown above Roum Auto Standby Setting 1 Press the MENU button to enter the MAIN MAIN MENU MENU 2 Press the AW buttons and then press the OK button to select Setup 30 LSSTB11 IB 110609 Annie indd 30 11 6A9A TF 3 Pressthe AW buttons to select Auto SETUP MENU Standby Setting and then press the OK I button to confirm 4 Pressthe lt P buttons to select 3 Hours 4 Hours OFF Press the OK button to confirm and then press the EXIT button to exit the main menu The default
29. tteries with used ones and do not mix different types of batteries Do not dispose of used batteries as domestic waste Dispose of them in accordance with local regulations Handling the Remote Control Take care of your fingernails when you press and hold the battery release tab Do not drop or cause impact to the remote control Do not spill water or any liquid on the remote control Do not place the remote control on a wet object Do not place the remote control under direct sunlight or near sources of excessive heat Remove the battery from the remote control when not in use for a long period of time as it could cause corrosion or battery leakage and may result in physical injury and or property damage including fire LSSTB11 IB 110609 Annie indd 9 Hr F6H H TF Using the Remote Control Besure to connect supplied infrared receiver prior to using the remote control Remove the self adhesive seal on the back of the infrared receiver and attach to a clean and flat surface Locate the receiver in a visible position and point the remote control to the window of front part of the receiver Remote sensor included Remote Control Operation Range Point the remote control unit within approx 5 metres from the remote control sensor and within 60 in front of the unit The operating distance may vary depending on the brightness of the room 10 Hr F6H H TF LSSTB11 IB 110609 Annie i
30. uttons to select a channel you wish to add from the left side of the EDIT FAVOURITES window Press the OK button to the channel to the favourite list in the right window 20 LSSTB11 IB 110609 Annie indd 20 11 6A9A TF zm c PresstheB button to enter to the right window and then press the AW buttons to select a channel to edit channels if necessary Reorder Press the GREEN button to reorder favourite channels Press the AW buttons to move favourite channels and then press the OK button to confirm Press the GREEN button again to cancel the operation Rename a Press the YELLOW button to change the favourite list name The EDIT window will display on the screen Press the d AW P buttons to select characters and then press the OK button to choose a character Repeat the same setup until the new name is displayed in the text field Press CAPS to toggle the letters between upper case and lower case Press Delete to backspace delete the last character Press the GREEN button to save the new name and return to previous menu Press the YELLOW button to cancel the current edit and return to previous menu with no name change LSSTB11 IB 110609 Annie indd 21 EDIT FAVOURITES 21 114 F6H9H Delete a Press the CH buttons to select a channel from the favourite list b Press the RED button to delete the selected channel To enable your favourites list
Download Pdf Manuals
Related Search