K-800
Contents
1. LASER DISPLAY SYSTEM USER MANUAL SONKEN Please read this manual carefully before operating REV 2 00 Laser display system BEAM LASER USER MANUAL Model K800 Thank you for using our products This Laser can perform fantastic Laser display system displaying effects The model has an optional DMX512 function which is highly recommended to realize gorgeous effects in any venues 1 This is 3B laser product Avoid eyes direct exposure to the laser light 2 Operate abide by the user manual Do not disassemble or repair the system by yourself When there is a problem please contact technician or your local dealer Installation should be done by professional technician Please set the laser product far away from those things as strobe light Do not exposure the system to wet environment 6 Do not touch the system by wet hand and pull the power cable forcefully 7 The work temperature is 10 40 C so the laser conduct doesn t work until it reach the work temperature when taking it in from cold environment 8 Do not turn on or off the system frequently avoid turning on it for long time 9 Prevent from strong vibration or G shock to the system 10 Prevent other harmful objects from entering the system 11 Keep at least 1 meter between the system and the objects in Page 1 the lighting 12 Connect the power cable after the system has been installed 13 Turn on the computer after the laser display system is2. form actions which do not go along with this manual are not in the range of warranty Page 7 10 color 0 No gradually draw Remark Laser display system 1 100 Manual setting figure the Gradually draw Of percent 101 251 Color gradually Display color erase effect may timing 252 255 Sound switch color gradually draw Gradually erase effect All related to The function of color can t Be exist without the modulability Address function setting 1 When the 10th code is ON the function of 1st code is the following The ist code is off sound control mode host laser The ist code is on AUTO play mode host laser 2 When the 10th code Is off DMX control Remark On the DMX 512 mode the LASER display system will shut off the LASER diode if the DMX 512 signal intermit Page 6 3 Ensure the fan and the exhaust is not blocked 4 The LASER display system should be statically fixed immovably Laser display system 5 It is essential to be earthed well for the sake of safety Back panel DMX ADDRESS Binary address switch controlling pattern s change in DMX 3 MIN MAX Sound sensitivity potentiometer Microphone MICLED Sound indicator light Red DMX512 IN DMX512 signal input optional DMX512 OUT DMX512 signal output optional FAN Q Input power line Page 3 Technical parameters Laser disp
3. lay system Model K800 BOGAN Red Green Laser display system Power supply 85 265VAC 50 60HZ LASER power R 75 100mMW_ G 25 45mW Scanner angle 18 Control model Sound control Auto control DMX control Saving static and dynamic patterns Can be changed by DMX easy to operate when in function automatic or sound working mode if the time of no sound last 10 second the color of picture will draw automatically Displaying more than 50 light beams and patterns displaying laser patterns specified by international laser display association such as Effect se diffusing laser network Slowly rotating color fan time and space tunnel and fairy flowers Can be programmed with customers Dimensions 218x189x128mm Net weight 5 1KG 2 5KG Gross weight Page 4 DMX 512 Channel optional Channel DMX Control Content value 0 69 Shut off the LASER diode 1 Control 70 139 Auto mode music active mode 140 209 Auto mode auto active 210 255 Manual model 3 Pattern 0 33 Static parem 34 255 Dynamic pattern 3 Strobe 0 255 8 grade speed 0 255 30 0 8 4 Dot 0 69 Normal display display 70 255 Dot display 0 160 Manual move 5 Horizontal 161 190 Automatic loop from left to right 191 220 Automatic loop from right to left move i i 221 255 putoimane loop from right to left and right t
4. o left 0 160 Manual move eerie 161 190 Automatic long from down to up ae 191 220 Automatic loop from up to down Automatic loop from up to down and 221 255 down to up 0 2 Original size 3 92 Manual zoom 7 Zoom 93 146 Automatic loop from small to big 147 200 Automatic loop from big to small 201 255 Automatic loop from big to small and small to big 8 Color 0 255 No 9 Reset 0 255 The channel value is 200 or bigger Than 200 then the system reset Page 5
5. on or you must power on the computer again Laser display system 14 Before powering on the system be sure the power cable is connected into the power socket well 15 Turn off the system for 25 minutes after running constantly for three hours ensure that the system is able to cool down in a Suitable environment 16 When to be transported use the original package to avoid damage 17 This sign indicates separate collection for electronics and electrical equipment Inspection Check that the following components are present within the package when receiving system from the list below 1 x LASER display system 1 x User manual 1 x DMX cable optional Installation 1 Be sure that there is no flammable or explosive objects nearby in 1 5meters area At the same time keep more than half a meter between the wall and LASER display system 2 Be sure the power socket output voltage matches that off the LASER display system Page 2 Maintenance Clean the lens regularly Do not use a wet cloth or other chemicals but a cotton cloth with alcohol The maintenance period depends Laser display system on the usage frequency and surrounding conditions of the LASER display system It is recommended that the system should be cleaned every 15 days Warning Be sure power off before any maintenance or fixture Declare The end user of this product should abide by the above instructions and warnings The results led by the per
Download Pdf Manuals
Related Search
K 800 k 800 k 8000ck software k800 keyboard k8000 k800 logitech k8000 icd 10 k800i k8000c k8009 k8006 k800 logitech keyboard