Home

2012 Fiat Blue&Me Supplement

1. e FIAT 500 BLUE amp ME USER S MANUAL VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc used in substitution therefore DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum If you are drink ing don t drive Ride with a designated non drinking driver call a cab a friend or use public transportation WARNING Driving after drinking can lead to an accident Your perceptions are less sharp your reflexes are slower and your judgment is impaired when you have been drinking Never drink and then drive This manual illustrates and describes the operation of fea tures and equipment that are either standard or optional on this vehicle This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle Please disregard any features and equipment described in this manual that are not on this vehicle Chrysler Group LLC reserves the right to make changes in design and specifications and or make additions to or improvements to its products without imposing any obliga tion upon itself to install them on products previously manu factured FIAT is a registered trademark of FIAT Group Marketing amp Corpor
2. Press the steering wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Playlists NOTE For further details on how to build playlists refer to PRACTICAL HINTS Playing Audio Tracks NOTE For managing audio files on iPod or iPhone devices refer to TECHNOLOGIES SUPPORTED BY BLUE amp ME Hands Free Communication MANAG ING AUDIO FILES FROM IPOD DEVICES Shuffle playback of the whole media library The option PLAY ANYTHING can be used to quickly play the whole content of your media library at random To start PLAY ANYTHING using manual interaction proceed as follows Press the MAIN button to launch the Main Menu and select MEDIA PLAYER then select USB OPTIONS and press the PRESET UP OK button on the rear of the steering wheel Select PLAY ANYTHING and press the PRESET UP OK button Or using voice interaction Press the steering wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Play Anything For further details on digital audio files playback refer to DIGITAL AUDIO SELECTION EN BLUE amp ME User s Manual 53 Audio play To start playing an audio file using manual interaction proceed as follows If the AUTOPLAY option is on connect your USB device iPod to BLUE amp ME track playback will start automatically You can also select the
3. Application ID code show your Accessing the device ID To access the device ID by manual interaction proceed as follows Select device ID and then press the PRESET UP OK button The instrument panel BLUE amp ME device ID display will show your Media Player Settings Autoplay When the Autoplay option is on BLUE amp ME will start to play the audio files on your USB device as soon as you turn the ignition key ON Once you activate this option the first time you use the player playback will start automatically ee BLUE amp ME User s Manual 67 To change the Autoplay setting using manual interaction proceed as follows Open the Main Menu select MEDIA PLAYER SET TINGS AUTOPLAY and then press the PRESET UP OK button To activate Autoplay select AUTOPLAY ON and press the PRESET UP OK button To deactivate Autoplay select AUTOPLAY OFF and press the PRESET UP OK button Or using voice interaction Press the and say Autoplay on or Autoplay off NOTE If you change the Autoplay settings after con necting the USB device the new setting will be activated the next time you connect a different USB device or the same USB device with an updated track library Shuffle Use the Shuffle option to change the playback sequence With the Shuffle option on BLUE amp ME will play digital audio files at random To change the Shuffle setting using manual interaction proceed as follows Op
4. PHONEBOOK this submenu allows you to view the phone numbers in your phonebook and to select one to dial If there are a large number of entries in your phonebook then the items will be contained in groups within alphabetical submenus indicating the contacts within that group The number of contacts within a group depends on the amount of entries in your phonebook MESSAGE READER This submenu enables the ability to read the last message received calling the message sender or deleting the last message received It is possible to store up to 20 received messages in the dedicated inbox and to play them later to call the message sender or to delete the messages It is possible to select notification signals for the arrival of a new SMS text Messages must be received while the mobile phone is connected to the BLUE amp ME system Mes sages that are already present on the mobile phone before entering the car and turning the ignition ON are not accessible MEDIA PLAYER this submenu allows the ability to scroll the digital audio tracks in the library by folder artist genre album or by playlist This submenu is used to select and play tracks For iPod players refer to MEDIA PLAYER FUNCTIONS SETTINGS this submenu allows you to perform tasks such as managing your phonebook entries cre ate a pairing relationship or select the SMS notifica tion settings en BLUE amp ME User s Manual 31 Launching the Main Menu To la
5. TROUBLESHOOTING Hands Free Communication Package General display screen Problem Display screen shows NO PHONEBOOK And the system says To copy the phone book to the system go to the Set tings Menu and select USER DATA To dial a number say Dial Probable Cause For pull phones When the system asked The data from the phonebook will now be copied onto the system Continue you responded with No You have not downloaded your phone book via the SETTINGS menu The downloaded phonebook was de leted For push phones You have not sent contacts to the sys tem using the ADD CONTACTS proce dure The downloaded phonebook was de leted Possible Solution For pull phones Use the option PHONEBOOK in the SETTINGS menu to download the phonebook again Enter contact information in the phone book on your mobile phone and then download the phonebook again see the section SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones Use the option ADD CONTACTS in the SETTINGS menu to send contacts in the phonebook on your mobile phone to the system see the section SET TING FUNCTIONS MANAGING USER DATA AND PHONEBOOK 84 BLUE amp ME User s Manual BEBE Problem Display screen shows PHONEBK EMPTY and the system says Phone book empty To add a new contact in the phone book go to the Settings menu and select User data To di
6. 33 France etc are difficult to call Probable Cause e The system does not support the use of prefixes suffixes or middle names initials when calling con tacts by voice Phone numbers containing inter On certain mobile phones when downloading names and phone numbers to the hands free commu nication system the sign is omitted Possible Solution When calling contacts by voice pro nounce the contact s name without using prefixes suffixes or middle names initials you have two entries with similar first and or last names in your phonebook modify one of the en tries in the mobile phone to make it unique Then re download the phonebook to the hands free com munication system Replace with 00 e g 39 becomes 0039 en BI UE amp ME Users Manual 91 To see the list of mobile phones and functions supported consult the dedicated website www fiatusa com BLUE amp ME or call Customer Services at 888 CIAO FIAT 888 242 6342 Message Reader Problem Probable Cause Possible Solution I receive SMS messages on the cel Not all cellular telephones sup Check that your cellular telephone lular telephone but not on port SMS messages transfer to supports the function for trans BLUE amp ME BLUE amp ME mitting SMS Messages by technol ogy or for further information refer to LIST OF TELEPHONE SETS SUPPORTED BY BLUE amp ME or visit the website www fi
7. BLUE amp ME can store a maximum of 20 messages a new incoming message will delete the oldest one re ceived from the inbox All messages stored by BLUE amp ME can be deleted by a single command To delete all messages open the BLUE amp ME Main menu and select DELETE ALL then press the PRESET UP OK button on the rear of the steering wheel The system will ask DEL MESS Press the PRESET UP OK 44 BLUE amp ME User s Manual button on the rear of the steering wheel to delete all messages or press the ESC button to cancel Or using voice interaction Press the VR steering wheel button and say Message reader After the audible tone say Delete all BLUE amp ME will ask Delete all messages from the vehicle now say Yes to delete all messages otherwise say No SMS Notification Settings With the BLUE amp ME message reader it is possible to set three notification signals to announce the arrival of a new SMS text e VIS ACOUST BLUE amp ME will notify you of a new incoming message using a visual signal on the instrument panel display and through an audible tone BLUE amp ME will also ask if you would like to read the message e VIS SIGNAL BLUE amp ME will notify you of a new incoming message using a visual signal on the instru ment panel display The message received can also be read later by pressing the PRESET UP OK button refer to HOW TO READ THE LAST SMS TEXT RECEIVED
8. User s Manual BEBE To delete the phonebook using manual interaction pro ceed as follows Select DEL PHONEBOOK and then press the PRESET UP OK button The system will display the question DEL PHONE BOOK To confirm press the PRESET UP OK button Or using voice interaction Press the amp vr button and say Settings wait for the tone and then say Delete phonebook The system will ask Delete copy of phonebook from the system To confirm say Yes Download the phonebook If you chose not to download the phonebook during the phone pairing procedure or if you recently deleted the current phonebook the USER DATA option will be available in the PHONEBOOK menu To download a paired mobile phone phonebook using manual interaction proceed as follows Select PHONEBOOK and then press the PRESET UP OK button Or using voice interaction Press the button and say Settings wait for the tone and then say Download phonebook Add contacts To copy contacts from your mobile phone to the hands free communication system using manual interaction proceed as follows Select ADD CONTACTS and then press the PRESET UP OK button Or using voice interaction Press the amp vr button and say Settings wait for the tone and say Add Contacts BLUE amp ME User s Manual 65 Then follow the instructions given on your mobile phone owner s manual for transferring contacts
9. In field File Name enter the required name and in field Save as type set the type wpl or m3u e Click on Save When the above steps are complete the new file m3u or wpl will be built SETTING FUNCTIONS The SETTINGS menu enables you to perform the fol lowing functions e Pair a mobile phone e Manage user data e Change the Media player settings e View the Advanced options NOTE The settings submenu are only accessed by using the steering wheel buttons To perform functions and adjustments in the SETTINGS menu you may use the buttons on the steering wheel or voice commands while the vehicle is not moving When ee BLUE amp ME User s Manual 57 the vehicle is moving you can use voice commands only Instructions are provided for both methods NOTE If you encounter difficulties with any of the BLUE amp ME settings refer to TROUBLESHOOTING Pairing a Mobile Phone Before you can use your mobile phone with the hands free communication function on your car you must create a pairing relationship between the mobile phone and the hands free communication system During the pairing procedure the hands free communi cation system attempts to detect a Bluetooth wireless technology enabled mobile phone within range and then establishes the connection using a Personal Identification Number PIN After a pairing relationship is established you can use the hands free communication system to make and receive phone calls
10. and do other operations via your wirelessly connected mobile phone NOTE Some mobile phones may require a setting change or access permission change in order for BLUE amp ME to automatically reconnect See your mo bile phones manual for more information IMPORTANT The mobile phone pairing PIN number is a special PIN generated randomly at each new pairing and used just for this operation It is not your SIM PIN and therefore it is not required to store or to keep it in mind losing it will not impair the hands free communi cation system operation The pairing procedure will only need to be performed once for your mobile phone After this procedure BLUE amp ME will automatically connect to your phone each time you get into the car and turn the ignition key to ON You can create a pairing relationship using the PAIRING option in the SETTINGS menu 58 BLUE amp ME User s Manual To create a pairing relationship using manual interaction proceed as follows Press the MAIN button to open the Main Menu then select SETTINGS by pressing the PRESET UP OK but ton Select PAIRING and then press the PRESET UP OK button The system will start the pairing procedure BLUE amp ME will show the mobile phone pairing PIN on the instrument panel display and announces it Please note that this is a PIN used just for this operation it is not your SIM PIN For the next two steps consult your mobile phone owner s manual
11. the system will activate 2nd level keywords when a valid 2nd level keyword is said the system will activate 3rd level keywords If the user says a valid 1st level keyword then the submenu relevant to that command will remain active until a keyword leading to another level is given the interaction is interrupted or the system times out because no command has been given the same rule applies for the other lower levels 2nd and 3rd level NOTE For the list of available keywords refer to VOICE COMMANDS KEYWORDS SUMMARY Valid means that the keyword said is included in the BLUE amp ME dictionary and can therefore be recog nized by the system for the concerned level To repeat the last system voice announcement press the steering wheel button and say Repeat or hold the steering wheel down for longer than 1 second The system can issue voice announcements A voice announcement is a spoken message initiated by the system To cancel a voice announcement press the 26 BLUE amp ME User s Manual X to cancel the entire VR session or press the steering wheel button wait for the beep and say Cancel A voice interaction is a two way communication spoken exchange between system and user To initiate a voice interaction press the steering wheel button and issue a command To interrupt a voice announcement from BLUE amp ME and say your reply before listening to the ent
12. AND INBOX e READER OFF BLUE amp ME deactivates the Message reader a new incoming message will not be signalled and will not be transmitted to or stored on the system Open the BLUE amp ME Main menu select the option MESS READER and then press the PRESET UP OK button on the rear of the steering wheel Select the option SIGNAL TYPE and scroll the three available options using the up and down buttons or select the desired option and then press the PRESET UP OK button on the rear of the steering wheel Or using voice interaction Press the steering wheel button and say Message reader After the audible tone say Signal type BLUE amp ME will list the available options and then you can select the required one by saying Reader off or Visual and acoustic signal or Visual signal only MEDIA PLAYER FUNCTIONS BLUE amp ME User s Manual 45 1 USB Port 2 Auxiliary Jack The MEDIA PLAYER menu enables the following e to display tracks stored on your USB device iPod to play audio files stored on your USB device iPod 46 BLUE amp ME User s Manual NOTE Before using the player refer to COMPATIBLE e Turn the ignition key to ON If the AUTOPLAY feature USB STORAGE DEVICES to check that your USB is set to ON BLUE amp ME will start playback auto memory device is compatible with BLUE amp ME matically when a USB device is present in the USB How To Connect The USB D
13. User s Manual 75 ALWAYS AVAILABLE VOICE COMMANDS Activates the Hel p function which provides the list of voice commands available for the current level Cancels voice and or manual interaction and deactivates the voice recognition system brb 37346 76 BLUE amp ME User s Manual TABLE OF HANDS FREE VOICE COMMANDS Two 2 E Y i Y E Zero A Enters dge 717 Enters dqe T Enters 47 Cheers dge S dige 767 Enters dgr 7 Enters dge 87 Enters dge Enters diga 0 Enters symbol Enters symbol p is Hash i Fj Hi dete urban i i Start Again i Enters aymbel Deletes the lest pror nd Deletes cli groupe of dies od with possiblity of inserting a new namber Repeats the telephone number entered end recognized by the hendifee system Calls the number entered by voice brb 63434 f Call Name Name avon Work Homc Mobde Starts colling name in the phoesbook mobde phane contact transferred to the handsfree system cau Telephone Phone Redal Redial recent call r Recall Opens the lest cali ist BLUE amp ME User s Manual Work Cols the selected contact ot Work o Home Calls the selected name ot Home
14. You use the same procedure as if you were pairing a mobile phone to the BLUE amp ME system Once connected you can control your PND by using the BLUE amp ME system Voice Commands and steering wheel buttons Also the BLUE amp ME system can be controlled from the Tom Tom PND INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle s electronic system to provide immunity to radio frequency signals Mobile two way radios and telephone equipment must be installed properly by trained person nel The following must be observed during installation The positive power connection should be made directly to the battery and fused as close to the battery as possible The negative power connection should be made to body sheet metal adjacent to the negative battery connection This connection should not be fused Antennas for two way radios should be mounted on the roof or the rear area of the vehicle Care should be used in mounting antennas with magnet bases Magnets may affect the accuracy or operation of the compass on vehicles so equipped The antenna cable should be as short as practical and routed away from the vehicle wiring when possible Use only fully shielded coaxial cable Carefully match the antenna and cable to the radio to ensure a low Standing Wave Ratio SWR Mobile radio equipment with output power greater than normal may require special precautions insta
15. about Bluetooth pairing On your mobile phone query for Bluetooth wireless technology enabled mobile phones that are within range this option on your mobile phone might be called Discover New Device etc View the list of Bluetooth wireless technology enabled mobile phones and select BLUE amp ME item that identifies BLUE amp ME on your car When prompted by the mobile phone enter the PIN number shown on the instrument panel display If pair ing is successful the system will say Connecting and then the display will show the paired mobile phone ID It is of vital importance to wait until this confirmation message is displayed since pressing the MAIN button or the ESC button will cancel the pairing process If pairing fails an error message will be dis played and the pairing procedure needs to be repeated After pairing the system will say Welcome immedi ately after connecting This message will no longer be heard the next time the phone connects to the system The system will ask if you would like to copy your paired phone s phonebook It is recommended to copy it To BLUE amp ME User s Manual 59 start copying the phonebook press the PRESET UP OK button otherwise press the ESC button You can download your phonebook at a later time using the menu option SETTINGS USER DATA or PHONE BOOK Or using voice interaction Press the button and say Settings wait
16. for the tone then say Pairing The system shows the mobile phone pairing PIN on the instrument panel display and repeats it For the next two steps consult your mobile phone owner s manual about Bluetooth pairing On your mobile phone query for Bluetooth wireless technology enabled mobile phones that are within range this option on your mobile phone might be called Discover New Device etc View the list of Bluetooth wireless technology enabled mobile phones and select BLUE amp ME item that identifies the hands free com munication package in your car When prompted by the mobile phone enter the PIN number shown on the instrument panel display using your mobile phone keypad If pairing is successful the system will say Connecting and then the display will show the paired mobile phone ID It is of vital importance to wait until this confirmation message is displayed since pressing the MAIN or X ESC buttons at this time may cancel the pairing process If pairing fails an error message will be dis played and the pairing procedure needs to be repeated The first time a phone connect to the system the system will say Welcome immediately after connecting This message will no longer be heard the next time the phone connects to the system 60 BLUE amp ME User s Manual The system will ask if you would like to copy your phone s phonebook Copying is recommended To start copying the phone
17. mobile phone is disconnected e g trying to make a call when no phone is con nected e Brief display of the name of your current mobile phone carrier displayed if not available e Information about message received message sender phone number or name if stored in the phonebook e Current BLUE amp ME M information or current menu option 29 Audio BLUE amp ME Hands Free Communication uses your in car audio equipment to deliver audio output hands free phone conversation media player voice announcements and tone signals For this purpose the current audio program is muted for the time needed You can always adjust the audio volume either through the radio or the steering wheel controls When the audio system is used by BLUE amp ME the radio display will show dedicated messages BLUE amp ME Hands Free Communication Function Menu BLUE amp ME Main Menu displays options within a structured list Each option item in the menu can be viewed on the instrument panel multifunction display Available options enable activation of different functions or change the settings of your BLUE amp ME system 30 BLUE amp ME User s Manual M The Main Menu includes the following options RECENT CALLS this submenu allows you to view a list of the recent calls made or received This list is either downloaded from your mobile phone memory or accumulated via use of the hands free phone or both
18. on the multifunction display For the next two steps consult your mobile phone owner s manual about Bluetooth pairing procedures for your phone It is essential to wait until you see this confirmation message on the display Pressing the MAIN button on the steering wheel or ESC before the message is displayed may cancel the pairing process If the pairing process fails an error message will be displayed in this event repeat the pairing procedure ee BLUE amp ME User s Manual 21 e After the first pairing BLUE amp ME will say Wel come immediately after connecting This message will no longer be heard when your phone automati cally connects to the BLUE amp ME system on future ignition cycles e BLUE amp ME will ask if you would like to copy your paired phone phonebook to BLUE amp ME It is recom mended to copy it To start copying the phonebook say Yes otherwise say No Making a Phone Call Assume that John Smith is one of the contacts stored in your phonebook To call John Smith proceed as follows Press the button and say Call John Smith e If the name is recognized the system will display the recognized contact s information on the display screen If there is just one phone number for John Smith in your phonebook the system will ask if you would like to call John Smith To start the call say Yes otherwise say If John Smith has several phone n
19. otherwise say No 38 BLUE amp ME User s Manual To redial the last phone number you called say Redial The system will display information about the last con tact you called and will ask if you would like to redial this phone number To redial the last phone number called say Yes otherwise say No NOTE If there are no incoming calls stored on the RECENT CALLS list BLUE amp ME will say No re ceived calls and the display will read No call found Incoming Calls With the hands free communication system you can respond to incoming phone calls using the steering wheel buttons When a phone call is received the system will display information about the caller s identity if avail able The incoming phone call can have a customized ring tone if this function is available on your mobile phone Answering a phone call e To answer the phone call press the MAIN button on the steering wheel e To end the phone call press the PHONE HANG UP e button on the steering wheel Rejecting a phone call e To reject the phone call press the PHONE HANG UP button on the steering wheel Ignoring a phone call To ignore the phone call and mute the phone call ring tone press the ESC button Press the ESC again to hear the call or ring tone again BLUE amp ME User s Manual 39 Answering an incoming phone call during an active phone conversation To answer an incoming phone call
20. required audio file and then press the PRESET UP OK button on the rear of the steering wheel Or using voice interaction Press the steering wheel button and say Play anything Pause To pause the track being played Press the ESC or the MUTE button on the radio Play To resume playback of the paused track Press the X ESC button or the MUTE button on the radio Stop To stop playing a track press the steering wheel button and say Stop To resume playback press the steering wheel button and say Play Next track To play the next track using manual interaction proceed as follows While playing a digital track press the Scan Up A rear steering wheel button Or using voice interaction While playing a digital track press the steering wheel button and say Next 54 BLUE amp ME User s Manual Previous Track To play the previous track using manual interaction proceed as follows While playing a digital track press the Scan Down V rear steering wheel button Or using voice interaction While playing a digital track press the steering wheel button and say Previous NOTE If the Previous track manual or voice com mand is given after playing the first 3 seconds of the track the track will be started over If it is given within the first 3 seconds the previous track will be played Changing audio sources To change the current sound source Radio C
21. symbol Voice Commands Voice commands can be said by the driver who does not need to change his her normal driving position to be heard by the system since the microphone is properly located and oriented to this purpose Voice commands which are words recognized by the system are identified as keywords The hands free communication system recognizes and responds to a preset list of voice commands The list of available voice commands depends on the keyword menu level that you are currently on The current list is always available by pressing the steering wheel button and saying Help or saying Help when BLUE amp ME is waiting for a voice command BLUE amp ME also recognizes personalized versions of voice commands like the name of a contact in your phonebook ee BLUE amp ME User s Manual 25 There is no voice training required for using voice commands with this system To issue a voice command to the system press the c VR steering wheel button and wait for the radio to mute then listen for Say a command and then a tone indi cating that voice recognition is active Then speak the command in your natural voice at a moderate pace When the system recognizes the command it will ac knowledge your command by speaking a response or acting on your command Voice commands are organized according to three in creasing levels 1st level 2nd level and 3rd level When a valid 1st level keyword is said
22. the Steering Wheel Buttons My iPod iPhone is not recognized by the Media Player System or is recognized then lost en BI UE amp ME User s Manual 111 BLUE amp ME Message Reader Quick Tips e The BLUE amp ME SMS Text Message Reader does not Insure that the software on your iPod iPhone is up to date and contact your local FIAT Dealership for possible software updates to the BLUE amp ME system The USB begins to play regardless of the last source I had selected With the AUTOPLAY feature turned on the system will always switch to the USB device if a device is already plugged in The volume changes significantly when I switch be tween the Media Player and AM FM SAT The audio level depends on the quality of the music and how the music was recorded onto the media device appear to be working This feature is only available on select mobile phones Please refer to the list of supported phones on the www fiatusa com website and select the BLUE amp ME icon Or contact the FIAT Customer Center at 1 888 CIAO FIAT 1 888 242 6342 112 BLUE amp ME User s Manual BLUE amp ME And The TomTom PND Portable e How do I mount my TomTom PND on the dash ns Insert the TomTom in the cradle holder then e How does the TomTom Portable Navigation Device insert the cradle holder into the spring loaded slot on communicate with the BLUE amp MET system the dash
23. transfer the conversation to the hands free phone enter the information required by your mobile phone This process is different for each mobile phone e The phone conversation is then transferred to the system Transferring a phone conversation from the hands free phone to your mobile phone To transfer a phone conversation from the hands free communication system to your mobile phone press the PRESET UP OK button on the rear of the steering wheel You can talk on your mobile phone and still use buttons on the steering wheel Specifically you can press the N MAIN button on the steering wheel to switch be tween two phone calls on your mobile phone or press the PHONE HANG UP button on the steering wheel to end the active call and activate the call on hold Muting a phone call To mute a phone call on and disable the microphone so that you can talk without being listened to by the caller press the X ESC Conference Call Function NOTE Only with Bluetooth wireless technology en abled mobile phones supporting this function With the Conference Call function you can call another contact while you are engaged in a phone conversation In this way you can speak with both contacts at the same time To start a conference call while you are still engaged in a phone conversation call the second required contact as described in MAKING A PHONE CALL When the Conference Call option is active the display will show CONFEREN
24. wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Artists Use the Scan Up Scan Down buttons to scroll the artist s albums To play all the albums of a desired artist select PLAY ALL and press the PRESET UP OK button To play an album by the selected artist select the desired album and then press the PRESET UP OK button To play a track by the selected artist select the title and then press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll the artist s albums To play all the albums of the desired artist select PLAY ALL and then press the PRESET UP OK button To play an album by a selected artist select the desired album and then press the PRESET UP OK button To play a track by a selected artist select the title and then press the PRESET UP OK button NOTE If your USB device iPod contains many audio files the ARTISTS menu will be subdivided into alpha betical submenus The alphabetical submenu will display just the first letter of the artists it contains e g A F or it will display the first two letters e g Aa Ar Selection by genre To select the tracks by genre using manual interaction proceed as follows Press the y MAIN button to launch the Main Menu and select MEDIA PLAYER then select USB OPTIONS and press the PRESET UP OK button on the rear of the steering wheel Select GENRES and then press the PRESET UP OK
25. while you are speaking voice commands to prevent misunderstand ing since the system could recognize other words in addition to or different from your voice command if several people are speaking If your car has a convertible top close it before using voice recognition NOTE In countries where the BLUE amp ME version in native language is not available voice recognition of the different commands and phonebook contacts could be difficult You are therefore recommended to adopt a pronunciation accent meeting the language available on BLUE amp ME e The display language can be changed from the instru ment cluster menu but to change the voice recognition VR language and announcements contact your FIAT Dealership or consult the dedicated site at www fia tusa com website Display The different BLUE amp ME Main Menu options are dis played on the instrument panel multifunction display The display shows the following information e Status information for the Bluetooth wireless tech nology enabled mobile phone e g on a call Indicates that BLUE amp ME is currently con nected with a Bluetooth wireless technology enabled mobile phone en BLUE amp ME User s Manual NOTE This icon is only displayed when the phone initially connects to BLUE amp ME and is part of the message that indicates the mobile phone s network pro vider e NO BLUETOOTH the connection between BLUE amp ME and the
26. wireless technol ogy and USB To get updated information about devices supported by BLUE amp ME contact a FIAT Dealership or consult the dedicated website at www fiatusa com ee BLUE amp ME User s Manual 69 Mobile Phones With Bluetooth Wireless Technology BLUE amp ME Hands Free Communication supports most mobile phones with Bluetooth 1 1 and Hands Free 1 5 profile support refer to the Bluetooth wireless connection specifications given in your mobile phone owner s manual Due to the different software versions supported on mobile phones certain functions e g answering a sec ond incoming phone call transferring phone a phone call from hands free communication system to mobile phone and vice versa etc may not be supported as described in this manual In any case phone conversation using the hands free communication package will not be impaired Pull phones Pull phone means that your mobile phone supports automatic phonebook download with Bluetooth wire less technology your whole phonebook will be automati cally downloaded to BLUE amp ME during the initial phone pairing procedure and updated every time your phone connects to BLUE amp ME To consult the list of mobile phones and functions supported consult the dedicated website at www fia tusa com or Customer Services on 888 CIAO FIAT 888 242 6342 Push phones phonebook not automatically downloaded Push phone
27. CE ee BLUE amp ME User s Manual 41 To end both calls press the PHONE HANG UP button on the steering wheel Both calls will be ended at the same time MESSAGE READER FUNCTIONS If your mobile phone with Bluetooth wireless technol ogy supports the message reader function at the arrival of a new SMS text BLUE amp ME plays a tone and it will ask if you would like to read it according to set signal types Even though your mobile phone is paired and connected to the BLUE amp ME Hands Free Communication system you might not be able to read SMS text messages on the BLUE amp ME system To view the list of mobile phones and functions supported go to the BLUE amp ME www fiatusa com website or contact Customer Services at 888 CIAO FIAT 888 242 6342 NOTE For information on signal types refer to SMS NOTIFICATION SETTINGS If you want BLUE amp ME to read the SMS message received by manual interaction press the PRESET UP OK button on the rear of the steering wheel The message will be read and any abbreviation or emoticon contained in the message will be spoken Otherwise press the ESC BLUE amp ME will not read the message but it will store it so you can read the message later for further information refer to HOW TO READ THE LAST SMS TEXT RECEIVED Or using voice interaction If you say Yes BLUE amp ME will read the message and speak any abbreviations and emoticons in the message
28. Cali a contact The Name keyword represents the nome of a contoct as stored your phonebook mobde phone contacts Calls the selected nome on Mobile Cellphone Activates phone fonction and provides voice instractions for using the hands free system Dials the phone number of the last caller Didis the last phone number called 7T brb 63435 78 BLUE amp ME User s Manual TABLE OF SMS MESSAGE READER VOICE COMMANDS Resd bast message Rad Ure manage Read the last tert Read the text Mond the lant SMS SMS Recah lent Message reader Delete ail messages im the inbox the yiten wil ck for coefesmation before deleting ot Notisication Notification Type Notation Activates the function Signal settings Rextor off iem comer Switch reader nif Deactivate message reader Deactvate reader Audio and visasi notification Audiu and visual Audio plus visust Audio plus visual sso fica Visual notification Only Visual Visual Only Visual Notifi cation Rech the selected mensoge the ibo the mmber of the mess Deletes the selected message from the Inbox Goes tothe nert menage Goes to the previous message the SMS message reader off when new SMS message svcewed there be no notficadon and noshing wil be trancmimed the
29. D CD Changer Media player press the PRESET UP OK but ton on the rear of the steering wheel or FM AM or MEDIA buttons on the radio NOTE For further details on voice commands key words to be used with the media player refer to VOICE COMMANDS KEYWORDS SUMMARY iPod compatibility What I can do e Listen to tracks in digital quality e Select tracks by category Artist Album Genre etc by voice control or using the controls on the steering wheel e Recharge the iPod via USB NOTE e The device must be in playback mode or paused to start playing a track on some iPod iPhone models e Load the tracks onto the iPod iPhone device using the procedure specified in the device manual e It is advisable to keep telephones and iPod s updated for optimal operation with the BLUE amp ME system ee BLUE amp ME User s Manual 55 What I cannot do multimedia files must be present and up to date To update file data follow the instructions given in your Py QUUD media file management software instruction manual e Play audio tracks purchased on digitally protected tracks DRM only on certain iPod devices and USB sticks e If certain items in your library have no Artist Album Title and Genre BLUE amp ME will show UNKNOWN in ALBUMS and GENRES menus To enter the re Practical Hints For Using The Media Player quired data follow the instructions given on your software instruc
30. DRM pro Reduce the number of tracks on all the digital audio files stored tected files that are ignored during the USB device on the USB device playback Reduce the number of nested fold Your playlist contains more than ers on the USB device 20 000 tracks that is the maximum number of files that can be copied to the media library The playlist stored on your USB device contains more than 20 nested folders Nested folders files will not be copied to the media library 98 BLUE amp ME User s Manual Problem After saying a command BLUE amp ME says Command not available although the com mand you prompt is a first level voice command The same USB memory device previously connected takes more than 10 seconds to restart play back on BLUE amp ME M Probable Cause e Certain commands are not avail able when the track is paused or the CD player is playing a track You removed the USB memory de vice from the PC before it was ready Possible Solution e If the track is paused resume play back by pressing the ESC but ton Then pronounce the voice command again To reset the USB memory device using Microsoft Windows XD click on My Computer in the Start menu click rightward on the USB memory device select Properties select Tools click on key Check Now in field Error checking select Automatically fix file sys tem errors and then click Start To avoid future proble
31. Dialing a phone number using voice commands To dial a phone number using voice interaction proceed as follows Press the gvr steering wheel button and say Dial The system will respond with Number please Say the phone number as a sequence of single digits e g 0 seal T2 E E 5 6 T5877 9 plus pound or star For example 248 555 1212 has to be said as two four eight five five five one two one two The system will repeat the complete phone number and display it If the number is complete say Dial or press the N MAIN button on the steering wheel to start the call If you have not finished speaking the phone number then say the remaining digits and then say Dial or press the MAIN button on the steering wheel to start the call The system will start the call to the displayed phone number To end the phone call press the PHONE HANG UP button on the steering wheel You can say the sequence of phone number digits in digit groups which allows you to verify the recognized number in several small portions Digit groups are cre ated by the pauses you use while pronouncing the sequence of digits If you pause after pronouncing sev eral digits a digit group is created The system will repeat the recognized digits If the spoken digits are correct you can continue pro nouncing the phone number If the spoken digits are incorrect you can delete the digit
32. INTS e If the problem persists delete the playlist from your USB device 96 BLUE amp ME User s Manual Problem Displayed message EMPTY PLAY LIST and BLUE amp ME says Probable Cause e No media file information is con tained in the playlist Possible Solution Delete the playlist from your USB device or copy media files to the Displayed message FILE ERROR Displayed message PROTECTED and BLUE amp ME says Protected content One or more digital audio files are damaged or invalid The track selected is DRM protected and it cannot be played by the media player Empty playlist The wpl file has exceeded the playlist using your media file soft BLUE amp ME 300 kb memory ware capacity limit Reduce the number of tracks in the e The playlist does not contain ref playlist using your media file soft erences to media files on your Ware USB device Problem Probable Cause Possible Solution Delete bad media from your USB device n this case nothing can be done BLUE amp ME User s Manual 97 Problem Probable Cause Possible Solution BLUE amp ME does not play all Your playlist contains DRM For further details refer to SUP the digital audio files in the play protected files that cannot be PORTED USB MEMORY DE list played or it contains references to VICES invalid media files The media library does not show Your playlist contains
33. KHz 44 1 kHz and 48 kHz and MPEG 2 Layer 3 16 kHz 22 05 kHz and 24 kHz Supports the proprietary Fraun hofer extension called MP2 5 which adds even lower sampling rates 8 kHz 11 025 kHz and 12 kHz ISO compliance with the following bitrates kbps 16 32 64 96 128 192 Both Mono and Stereo And Layer 3 VBR and CBR support Digital audio file without data compression 4 MAA support Sampling rates 8 11 16 22 24 32 44 48 kHz Bitrates 16 32 48 64 80 96 112 128 160 192 224 256 kbps NOTE The media player does not support audio files compressed with other formats and DRM Digital Right Management protected audio files Non supported au dio files that may be present on the USB device will be ignored 72 BLUE amp ME User s Manual Supported playlist formats The media player supports the following playlist for mats e m3u file containing a list of tracks release 1 and 2 e wpl Windows based file containing a playlist playlist capacity limit for this format is 300Kb Play lists with extension wpl can be built with Microsoft Windows Media Player The media player does not support nested or linked playlists Playlist tracks with relative and absolute paths are supported Query based playlists are not supported If a file is not in the expected location a search for will not be performed For further details on how to bui
34. NRES menu Opens the Media Player ALBUMS menu Opens the Media Payer PLAYLISTS mossi BLUE amp ME User s Manual 81 brb 63439 82 BLUE amp ME User s Manual TABLE OF SETTINGS FUNCTIONS VOICE COMMANDS Saup Settings Seating Configuration Opens the SETTINGS menu of the hand ce Open the USER DATA eue pearing procedure User data k Delete users Download phone book Copy phonebook Download numbers Copy numbers Deletes user data for the parng relotiomisps of users Deletes current phonebook Ocwnloods phonebook from connected molde phone to spsteee Note Freier avaible ce planes phonebook management Tromfers contacts fom connected mabe phane 12 system Note Fencton on phones with ungle contact monogement oniy Deletes dots and phonebooks contacts of of pored tdephanes and rectore the yitam defouit settings If your phone is provided with a function for automatically transmitting the phonebook via Bluetooth technology the en tire phonebook will be automatically copied to the hands free system during the pairing procedure If your phone has a function for transmitting single phonebook contacts via Bluetooth technology during pairing you will be asked to transfer names from the phonebook using your phone brb 63440 BLUE amp ME User s Manual 83
35. OR PERFORMANCE OF THE SOFTWARE THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE IN NO EVENT SHALL FIAT AUTO S p A S SOFTWARE SUPPLIERS AND OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN EXCESS OF U S TWO HUNDRED FIFTY DOLLARS 0 5 250 00 FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFT WARE PRINTED MATERIALS 108 BLUE amp ME User s Manual QUICK TIPS FREQUENTLY ASKED QUESTIONS BLUE amp ME Hands Free Communication Quick What Can Do With My BLUE amp ME Hands Free Communication Package Make phone calls using BLUE amp ME Hands Free Communication Listen to music from a USB stick or iPod through the BLUE amp ME Media Player Read SMS Text Messages communicated through the BLUE amp ME Message Reader only available with certain mobile phones Control your FIAT TomTom PND Personal Naviga tion Device If Equipped Tips e If I have questions and cannot find the answer in the BLUE amp ME User s Guide is there anyone I can call Yes you can contact the FIAT Customer Center at 1 888 CIAO FIAT 1 888 242 6342 If I know the series of commands I wish to make is there a way to avoid the voice command prompts Yes it is called barging in Simply press the vr steering wheel button and say your first c
36. Otherwise say No the system will store the message so you can read it later for further information refer to HOW TO READ THE LAST SMS TEXT RECEIVED 42 BLUE amp ME User s Manual How To Read The Last SMS Text Received After receiving a message BLUE amp ME will store it both read or not read messages in the inbox refer to INBOX To read the last message received open the BLUE amp ME Main menu and select the option MESS READER then press the PRESET UP OK button on the rear of the steering wheel Select the option READ LAST and press the PRESET UP OK button on the rear of the steering wheel BLUE amp ME will read the last message received Or using voice interaction Press the steering wheel button and pronounce Read last one BLUE amp ME will read the text of the last message received Inbox BLUE amp ME will store up to 20 received messages in the event of linked messages the number of stored messages could be lower when your mobile phone is connected with Bluetooth When the inbox is full the new incoming message will delete the oldest message received even if not yet read It is also possible to delete just one message or to delete the entire inbox refer to MANAGING MESSAGES To read a particular message stored in the inbox open the BLUE amp ME Main menu and select the option MESS READER then press the PRESET UP OK button on the rear of the steering wheel Selec
37. Reset user data To reset all user data to the default values using manual interaction proceed as follows Select DELETE ALL and then press the PRESET UP OK button The system will display the question Delete all To confirm press the PRESET UP OK button Or using voice interaction Press the button and say Settings wait for the tone and then say Reset The system will ask Delete all data saved by users from the system To confirm say Yes Advanced Options To navigate to the ADV OPTIONS menu using manual interaction proceed as follows Press the MAIN button to open the Main Menu then select SETTINGS by pressing the PRESET UP OK but ton Select ADV OPTIONS and then press the PRESET UP OK button Within the ADV OPTIONS menu you can access the device ID NOTE This code is an 8 digit number device ID which uniquely identifies the BLUE amp ME system installed on your car and cannot be changed 66 BLUE amp ME User s Manual Accessing the Image ID To access the Image ID by manual interaction proceed as follows Select Image ID and then press the PRESET UP OK button The instrument panel display will BLUE amp ME mage ID code show your Accessing the Application ID To access the Application ID by manual interaction proceed as follows Select Application ID and then press the PRESET UP OK button The instrument panel display will BLUE amp ME
38. al a phone number say Dial fol lowed by the number Probable Cause For pull phones You answered Yes to To use the phonebook it is necessary to copy con tacts to the system Continue but the downloaded phonebook does not in clude any valid contacts You have used the option PHONE BOOK in the SETTINGS menu but the mobile phone phonebook does not in clude any valid contacts For push phones You used the ADD CONTACTS option but did not send any valid contacts to the system Possible Solution For pull phones e Enter valid contact information name and one phone number at least in the phonebook on your mobile phone then download the phonebook again see the section SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones Use the option ADD CONTACTS in the SETTINGS menu to send contacts from your mobile phone to the system see the section SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK BLUE amp ME User s Manual 85 Display screen shows And the system says No Bluetooth telephone Probable Cause The paired mobile phone is turned off The paired mobile phone is not within range of the system the mobile phone should be located within approximately 30 feet of the system Bluetooth wireless technology connec tion has been disabled on your mobile phone Possible Solution e Turn the paired mobile phone on Make sure th
39. and then download your phonebook or contact again For phones with no caller ID support or for calls from callers with caller ID blocked nothing can be done and the message will always appear ee BLUE amp ME User s Manual 87 Problem Probable Cause Possible Solution Display screen shows e Even occasional short viewings of the e Stop your car and attempt to perform the ONLY AT REST and the display may be hazardous if your function again manually or continue driving system says This com attention has been diverted away from and perform the function using the voice rec mand is available only your driving tasks Certain ognition system when the vehicle is sta BLUE amp ME functions which require tionary the user to give attention to the car dis play are only available when the car is stopped The system did not re If you do not speak soon enough after e Press the button and pronounce the spond to voice com pressing the button the system voice command again mand or key press will interrupt voice interaction If you Press the amp vr button and pronounce the are speaking too far from the in car mi voice command again crophone for example if you are sitting Press the V MAIN button and try the op in the back seat the system may not eration again Make sure to take action hear your voice command within approximately eight seconds after e If you don t wait for the tone after pr
40. are not read or are not correctly read by BLUE amp ME hands free communication package BLUE amp ME SMS message reader displays sender telephone number instead of sender name Sometimes received SMS message sender cannot be called received SMS messages cannot be interpreted by BLUE amp ME Probably during the mobile phone pairing procedure step you chose not to download the tele phone book or if your mobile phone only supports management of single contacts you chose to download only some contacts e Some SMS messages e g the ones sent by telephone operator have no associated sender tele phone number so option CALL cannot be used To download your cellular tele phone book from the Settings menu select the Copy Phonebook or Add Contacts option refer to SETTING FUNCTIONS CELLU LAR TELEPHONE REGISTRA TION and USER DATA MAN AGEMENT paragraphs n this case nothing can be done 94 BLUE amp ME User s Manual Media Player Problem Displayed message NO MEDIA and BLUE amp ME says No media found After connecting your USB device and turning the ignition key to ON no music is played e Autoplay may be set to off Probable Cause Possible Solution No USB device is connected to the Connect your USB device to USB port in the car BLUE amp ME No digital audio files are stored e Store digital audio files on your on the USB memory device USB memory device
41. at your phone is paired Make sure that the Bluetooth wireless technology connection on your mobile phone is enabled Make sure that the mobile phone you paired with the system is within range Display screen shows DISCONNECTED Probable Cause A technical error occurred with the mo bile phone Bluetooth wireless technol ogy capabilities During an ongoing phone conversation the mobile phone was taken out of the system range Possible Solution Reset BLUE amp ME by turning the mo bile phone off and on Reset BLUE amp ME by turning the igni tion key to OFF and then to ON again 86 BLUE amp ME User s Manual Problem Display screen shows PAIR FAILED and the system says Pairing un successful Please try again Display screen shows PRIVATE NUMBER Probable Cause A technical error occurred during the pairing procedure The caller is not recognized as a name stored in the phonebook or the paired mobile phone does not have a called ID feature e The caller has blocked caller ID to pre vent the system from displaying the caller s name and or phone number Possible Solution e Verify the correct PIN number and try entering it again Reset the mobile phone by turning it off and on and then retry the pairing procedure see the section SETTING FUNCTIONS PAIRING YOUR MO BILE PHONE Enter a contact in your mobile phone book for the incoming call
42. ate Communication SpA used under license by Chrysler Group LLC Copyright O 2011 Chrysler Group LLC BLUE amp ME User s Manual 1 888 CIAO FIAT 1 888 242 6342 CONTENTS Overview The BLUE amp ME Hands Free Communication Package Message Reader Media Player Road Safety due dne t ree den hes ll Display And Buttons On The Steering Wheel Display Front Steering Wheel Buttons 14 Rear Steering Wheel Buttons 14 lll BLUE amp ME Hands Free Communication Package Quick Reference Guide 18 Prepare Your Mobile Phone Phonebook 18 Important Notes 18 Try Out The Voice Commands 19 Pair Your Mobile Phone 20 2 BLUE amp ME User s Manual Making a Phone Call ll Message Reader Quick Reference Guide ll Media Player Quick Reference Guide ll How To Use BLUE amp ME Hands Free Communication Steering Wheel Controls Voice Commands Display cius seus vate eee ern eed nus Audio BLUE amp ME Hands Free Communication Function Menu ll BLUE amp ME Hands Free Communication coma ae et we EE ate Be Pees Making a Phone Call Incoming Calls Managing Phone Calls Conference Call Fun
43. ate from the DEVICE on media such as a ROM chip CD ROM disk s or via web download or other means and is labeled For Upgrade Purposes Only you may install one 1 copy of such SOFTWARE onto the DEVICE as a replacement copy for the existing SOFTWARE and use it in accordance with this EULA including any additional EULA terms accompanying the upgrade SOFTWARE INTELLECTUAL PROPERTY RIGHTS title and intellectual property rights in and to the SOFTWARE including but not limited to any images photographs animations video audio music text and applets incorporated into the SOFTWARE the accom panying printed materials and any copies of the SOFT WARE are owned by FIAT Auto S p A s Software Sup pliers their affiliates or suppliers The SOFTWARE is licensed not sold You may not copy the printed materi als accompanying the SOFTWARE title and intellec tual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This EULA grants you no rights to use such content All rights not specifically granted under this EULA are reserved by FIAT Auto S p A s Software Suppliers their affiliates and suppliers Use of any on line services which may be accessed through the SOFT WARE may be governed by the respective terms of use relating to such services I
44. atusa com SMS texts received from your phone Not all mobile phones support carrier service center show abnor correct transfer of the phone carri mal displaying of sender s name or name sending the SMS text to number BLUE amp ME 92 BLUE amp ME User s Manual Problem BLUE amp ME stopped receiving messages from your cellular tele phone Probable Cause You may have set the notification type to Reader Off by mistake Possible Solution e Set on menu notification settings either AUDIO VISUAL notifica tion or VISUAL NOT notification refer to READER FUNCTIONS SMS MESSAGES NOTIFICATION SETTINGS paragraph Problem You cannot display some SMS mes sages present on your cellular tele phone on BLUE amp ME SMS mes sage list Probable Cause e BLUE amp ME is capable of read ing and storing the last 20 re ceived SMS messages while the telephone set is connected to the system Messages received while not connected to the system are not transferred to BLUE amp ME Possible Solution e SMS messages stored by BLUE amp ME can be deleted refer to READER FUNCTIONS SMS MESSAGES SMS MES SAGES MANAGEMENT AND DELETING ALL SMS MESSAGES paragraphs BLUE amp ME User s Manual 93 Problem Probable Cause Some SMS messages or part of them Some special characters within Possible Solution n this case nothing can be done
45. ber on your mobile phone keypad and connect the phone call following the procedure required by your mobile phone ee BLUE amp ME User s Manual 37 e Conduct the conversation using the hands free com munication system To end the phone call press the PHONE HANG UP e button on the steering wheel or end the phone call from your mobile phone keypad Calling a phone number using call history recent calls RECENT CALLS option is a list of the recent calls made or received It can consist of up to ten incoming calls up to ten outgoing calls and up to five missed calls To dial a phone number using manual interaction pro ceed as follows e Press the MAIN button on the steering wheel to open the Main Menu e Select RECENT CALLS and then press the PRESET UP OK button on the rear of the steering wheel e The system will present a list of phone numbers Use the Scan up Scan down buttons to select the required phone number Then press the PRESET UP OK button on the rear of the steering wheel or the MAIN button on the steering wheel to start the call To end the phone call press the PHONE HANG UP button on the steering wheel Or using voice interaction To call back the last incoming phone number press the amp vR steering wheel button and say Call back The system will display information about the last caller and ask if you would like to call back this contact To respond with yes say Yes
46. book say Yes otherwise say No For certain mobile phones the phonebook is not copied automatically in this case you must send the contacts in your mobile phone s phonebook to the BLUE amp ME hands free communication system using your mobile phone keypad Practical hints To improve both the voice recognition of your phone book entries and BLUE amp ME pronunciation accuracy when repeating the entries please try to enter contact entries and memorize them using the following criteria e Avoid abbreviations e Write foreign names according to the way in which they are pronounced according to the rules of the BLUE amp ME language set on your car For example enter Tanja as Tanya to improve recognition ac curacy and also to obtain the correct pronunciation by the system When adding or editing contact entries insert the appropriate accent marks when the name requires these marks to be properly pronounced and recog nized by the system For example enter Nicolo Re bora as Nicol R bora to obtain the correct pronun ciation When adding or editing contact entries bear in mind that certain capital letters may be read as Roman numerals e g V may be read as fifth When calling contacts by voice do not include the middle names or middle initials of your contacts en BLUE amp ME User s Manual 61 NOTE e You only need to pair your mobile phone a single time e Depending on the size of your phon
47. button 50 BLUE amp ME User s Manual BEBE Or by using voice interaction Press the steering wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Genre Use the Scan Up Scan Down buttons to scroll the genres To play all the tracks of the selected genre press the PRESET UP OK button NOTE If your USB device iPod contains many audio files the GENRES menu will be subdivided into alpha betical submenus The alphabetical submenu will display just the first letter of the name of genre it contains e g A F or it will display the first two letters e g Aa Ar Selection by album To select an album using manual interaction proceed as follows Press the MAIN button to launch the Main Menu and select MEDIA PLAYER then select USB OPTIONS and press the PRESET UP OK button on the rear of the steering wheel Select ALBUMS and then press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll through the albums To play music from a desired album select the album and press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll through the album tracks To play all the tracks in the album select PLAY ALL and press the PRESET UP OK button To play just one track select the track title and press the PRESET UP OK button ee BLUE amp ME User s Manual 51 Or by using voice interaction Press t
48. ction ll Message Reader Functions How To Read The Last SMS Text Received Managing Messages Deleting All Messages SMS Notification Settings ll Media Player Functions How To Connect The USB Device iPod To BLUE amp ME Hands Free Communication How To Manage The Media Library ee BLUE SME User s Manual 3 Playing Audio Tracks Practical Hints For Using The Media Player B Setting Functions Pairing a Mobile Phone Managing User Data Advanced Options Media Player Settings ll BLUE amp ME Hands Free Communication Supported Mobile Mobile Phones With Bluetooth Wireless Technology ec ERE Supported USB Memory Devices List Of Available Voice Commands li Troubleshooting 00 Hands Free Communication Package Message Reader Media Player iPod 99 H Personal Data Protection 101 System Software Use Notice 101 End User License Agreement EULA 102 Grant Of Software License This EULA Grants You The Following License 102 Desc
49. d by FIAT Auto S p A from one or more software licensors FIAT Auto S p A s Soft GRANT OF SOFTWARE LICENSE This EULA ware Suppliers Such software products as well as grants you the following license associated media printed materials and online or _ you may use the SOFTWARE as installed on the electronic documentation SOFTWARE are pro DEVICE tected by international intellectual property laws and treaties The SOFTWARE is licensed not sold rights reserved en BLUE amp ME User s Manual 103 DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS versions e g in the user documentation and in the Speech Recognition The SOFTWARE includes speech recognition component s you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process Neither FIAT Auto S p A nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process Limitations on Reverse Engineering Decompilation and Disassembly You may not reverse engineer decompile or disassemble the SOFTWARE except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limi tation Single EULA The end user documentation for the DEVICE may contain multiple versions of this EULA such as multiple translations and or multiple media software Even if you receive multiple versions of the EULA yo
50. dress any errors Distraction Hazard many features may require manual non verbal setup Attempting to perform such set up or entering data while driving can brb 37359 seriously distract your attention and could cause an accident or other serious consequences Stop Multianctional Display the vehicle in a safe and legal manner before NOTE In this User s Guide the descriptions of the attempting these operations menu entries refer to the multifunctional display which visualizes some entries in abbreviated form 14 BLUE amp ME User s Manual Front Steering Wheel Buttons Rear Steering Wheel Buttons The right hand control is a rocker type switch with a pushbutton in the center Press the switch up for Volume Press the switch down for Volume The button in the center is the SRC button used to change audio sources e g AM FM CD Media Player 2 is 4 1 MUTE ESC 3 PHONE HANG UP 2 PHONE MAIN 4 VOICE RECOGNITION VR 045105562 ee BLUE amp ME User s Manual 15 The left hand control is also a rocker type switch with a pushbutton in the center Press the top of the switch to Scan Up A Press the bottom of the switch to Scan Down V The button in the center is the PRESET UP OK button 16 BLUE amp ME User s Manual Button Short press function less than 1 second Long press function more than 1 second N MAIN Launch BLUE a
51. e USER DATA menu you can perform the following functions described below ee BLUE amp ME User s Manual 63 Delete user data In the USER DATA menu you can delete the pairing list After you delete the pairing list you cannot use an unpaired phone with the hands free communication sys tem or its phonebook until you re pair it Always remember that this operation deletes all the devices from the pairing list To delete user data using manual interaction proceed as follows Select DELETE USERS and then press the PRESET UP OK button The system will display the message DELETE USERS To confirm press the PRESET UP OK button Or using voice interaction Press the Say Settings wait for the tone then say Delete users The system will ask Delete all paired users To confirm say Yes NOTE e Always remember that if a mobile phone is paired with the system while another phone is connected the connection with the current phone is ended to estab lish a connection with the new phone It is not possible to delete the pairing relationship with a single phone on the pairing list unless it is the only phone present on the pairing list If all paired users are deleted from the pairing list then each phone must be re paired before it can be used with BLUE amp ME again Delete the phonebook In the USER DATA menu you can delete the phonebook data that was downloaded to the system 64 BLUE amp ME
52. ebook BLUE amp ME may take some time to download or check for updates So if you try to immediately make e You can pair up to five mobile phones but only one phone can be used at a time To use one of the other paired phones the currently connected phone needs to be powered off or it s Bluetooth setting must be turned off BLUE amp ME will then search the paired phone list looking for a phone to connect to On your paired mobile phone the Bluetooth setting must be turned on in order to connect your mobile phone with BLUE amp ME Hands Free Communica tion Before transferring your mobile phone contacts to the hands free communication system make sure that each contacts first and last name is unique and dis tinctly recognizable to improve the voice recognition results a phone call after getting into the vehicle the BLUE amp ME system may tell you to wait The system will download only valid contact entries A valid contact entry must include both a name and at least one phone number If you would like to re pair your mobile phone delete the old pairing relationship first During this operation all paired phones and their associated phonebook information will be deleted To delete a paired phone from the system from the USER DATA menu select DELETE USERS On your mobile phone delete BLUE amp ME from the list of Bluetooth mobile phones following the specific instructions for your mobile phone refer t
53. el e Scroll BLUE amp ME menu items e Scroll though media player tracks e Scroll inbox messages NOTE e For both operating modes of Voice Command steering wheel buttons short or long press the function chosen will be activated when you release the button e When connecting to BLUE amp ME Hands Free Com munication for the first time your phone s phonebook will automatically be downloaded If this operation is not allowed immediately after pairing for the first time the BLUE amp ME system will prompt you for the 18 BLUE amp ME User s Manual EBENEN phonebook each time you connect to the system For phones containing a SIM card the phonebook on the SIM card will be downloaded if it is allowed See your phone s Operating Manual for further details BLUE amp ME HANDS FREE COMMUNICATION PACKAGE QUICK REFERENCE GUIDE To quickly get started with using the BLUE amp ME Hands Free Communication Package with voice recogni tion and Bluetooth wireless technology e Prepare your mobile phone phonebook e Turn the ignition key to ON e Try out the voice commands e Pair your mobile phone e Make a phone call Instructions for each of the above functions are given in the following paragraphs Prepare Your Mobile Phone Phonebook Before creating a pairing relationship between your mo bile phone and BLUE amp ME Hands Free Communica tion you should make sure that you have contact entries
54. en the Main Menu select MEDIA PLAYER SET TINGS SHUFFLE and then press the PRESET UP OK button To activate the Shuffle option select SHUFFLE ON and press the PRESET UP OK button To deactivate it select SHUFFLE OFF and press the PRESET UP OK button Or using voice interaction Press the fev button and say Shuffle on or Shuffle off 68 BLUE amp ME User s Manual Repeat Use the Repeat option to repeat a track To activate the Repeat option using manual interaction proceed as follows Open the Main Menu select MEDIA PLAYER SET TINGS REPEAT and then press the PRESET UP OK button To activate the Repeat option select REPEAT ON and press the PRESET UP OK button To deactivate it select REPEAT OFF and press the PRESET UP OK button Or using voice interaction Press the 4vr and say Repeat on or Repeat off NOTE With the Repeat option on the previous and next commands will play the previous or next track and the new track will be repeated Exit the settings menu At the end of any of the operations described above you can exit the SETTINGS menu as described below or the message will disappear from the display in less than 10 seconds To exit the SETTINGS menu using manual interaction Select EXIT and then press the PRESET UP OK button BLUE amp ME HANDS FREE COMMUNICATION SUPPORTED MOBILE PHONES BLUE amp ME Hands Free Communication supports your personal devices via Bluetooth
55. er of files the BLUE amp ME system may take up to 20 minutes to fully index the files when the device is first connected to BLUE amp ME The BLUE amp ME system will remember the track data so the next time the device is connected it will perform a quick scan of the contents and be ready to use much faster e iPod player refer to MEDIA PLAYER FUNCTIONS e The set up menu also allows you to decide whether to play audio files automatically when connecting the USB device or to play them upon your command For further details on the media player refer to MEDIA PLAYER FUNCTIONS NOTE If you encounter difficulties with any of the voice recognition operations consult the section MEDIA PLAYER TROUBLESHOOTING 24 BLUE amp ME User s Manual HOW TO USE BLUE amp ME HANDS FREE COMMUNICATION Steering Wheel Controls Buttons on the steering wheel are used to perform functions on the hands free communication package activating voice recognition using the media player functions or selecting a BLUE amp ME menu option Certain buttons have multiple functions which depend on the current state of the system The function chosen in response to a key press is in some cases controlled by the duration of the key press short or long NOTE e For further information refer to DISPLAY AND BUT TONS ON THE STEERING WHEEL e Instructions concerning manual controls are identified in the text by the appropriate
56. essing the MAIN button pressing the button system will get only a portion of the keyword and will not recognize it 88 BLUE amp ME User s Manual Problem Probable Cause Possible Solution If you don t press the button be fore pronouncing a voice command the system will not activate voice recogni tion and therefore will not recognize your voice commands If you don t press the MAIN but ton to enter the Main Menu it will not be possible to manually access the BLUE amp ME menu If after pressing the MAIN button you don t take action within approxi mately eight seconds the system will not respond to your key press The mobile phone e After you delete the pairing related user e Select option DELETE USERS on the system prompts you to enter a information on your mobile phone or and delete all users then pair the phone PIN number but no on the system the Bluetooth pairing again see the section SETTING FUNCTIONS phone pairing proce relationship between your mobile phone MANAGING USER DATA AND PHONE dure was running and BLUE amp ME will no longer work BOOK and also the section SETTING FUNC TIONS PAIRING YOUR MOBILE PHONE BLUE ME User s Manual 89 Problem Probable Cause When in close proximity of the car e Some types of mobile phones re answering a phone call directly quire you to set the phone to using the mobile phone a
57. evice iPod To pom BLUE amp ME Hands Free Communication e If AUTOPLAY is set to ON BLUE amp ME will start To connect your USB device iPod to BLUE amp ME playback automatically when a USB device is inserted Hands Free Communication proceed as follows into the USB port Copy tracks on your USB device iPod BLUE amp ME NOTE recognizes wma mp3 and wav aac formats for audio For the best use of BLUE amp ME it is recommended to files and wpl and m3u for playlists use USB devices with maximum capacity of 32 GB e Indexing time will increase with the number of files present on the media device For a good customer experience a maximum total file size of 4 GB on the media device is recommended e USB devices with USB wire use the wire to connect For further information refer to SETTINGS FUNC the USB device iPod to the USB port on the car TION MEDIA PLAYER e USB devices without USB wire just connect the USB device iPod directly or by an extension lead to the USB port on the car The multimedia player does not play audio files covered It is possible to use BLUE amp ME to select and play by digital rights DRM tracks after the media library has been built ee BLUE amp ME User s Manual 47 How To Manage The Media Library Using the media player you can select the audio files stored on your USB device iPod using voice commands or the steering wheel buttons NOTE For the best use of BLUE amp ME it
58. f this SOFTWARE contains documentation that is provided only in electronic form you may print one copy of such electronic documentation EXPORT RESTRICTIONS You acknowledge that the SOFTWARE is subject to U S and European Union export jurisdiction You agree to en BLUE amp ME User s Manual 107 comply with all applicable international and national laws that apply to the SOFTWARE including the U S Export Administration Regulations as well as end user end use and destination restrictions issued by U S and other governments TRADEMARKS This EULA does not grant you rights in connection with any trademarks or service marks of FIAT Auto S p A FIAT Auto S p A s Soft ware Suppliers their affiliates or suppliers PRODUCT SUPPORT Product support for the SOFT WARE is not provided by FIAT Auto S p A s Software Suppliers or their affiliates or subsidiaries For prod uct support please refer to FIAT Auto S p A support number provided in the documentation for the DE VICE Should you have any questions concerning this EULA or if you desire to contact FIAT Auto S p A for any other reason please refer to the address provided in the documentation for the DEVICE No Liability for Certain Damages EXCEPT AS PRO HIBITED BY LAW FIAT AUTO S p A S SOFTWARE SUPPLIERS AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE
59. gnition key is turned to ON BLUE amp ME will start building your media library At the end of this operation you can surf Operating pante af i Bus system while div the whole library and scroll its categories as desired ic ova road and possibly cause an accident or other serious consequences for this reason certain functions are using the buttons on the steering wheel or voice commands BLUE amp ME will then play your selec E puru tee disabled by the BLUE amp ME system until driving conditions are secure and if required only when tion via the car sound system the car is stopped Read and Follow Instructions before using your system read and follow all instructions and safety information provided in this end user manual User s Manual Failing to follow precautions found in this User s Manual can lead to an acci dent or other serious consequences Continued 12 BLUE amp ME User s Manual WARNING Continued WARNING Continued e Keep User s Manual in the car when kept in the General Operation car the User s Manual will be a ready reference for e Voice Command Control some functions within you and other users unfamiliar with the system Please make certain that before using the system for the first time all persons have access to the User s Manual and read its instructions and safety information carefully Do not change system settings or enter data
60. group by saying 36 BLUE amp ME User s Manual Delete The system will delete the last group of num bers and display the partially dialed phone number Then you can say the digit group again and also the remaining phone number digits To cancel the phone call say Cancel To cancel the phone call and start dialing again say Start over To ask the system to repeat the recognized phone num ber say Repeat If no phone number was dialed the system says No number available If the repeated phone number is correct say Dial to start the call NOTE When connected to BLUE amp ME and dialing phone number by voice commands it is essential to minimize background noise in the car and to ask the other passengers to keep silent while you are speaking the digits Since the system is speaker independent it can also recognize other voices there is a risk that some numbers will be accidentally recognized added to cor rect numbers or not recognized Dialing a phone number using the mobile phone keypad Alternatively you can dial a phone number using your mobile phone keypad and then continue your conversa tion using the hands free communication system It is a requirement that you create a pairing relationship and that the mobile phone is within range of the hands free communication system of your car To dial a phone number using your mobile phone key pad proceed as follows e Dial the phone num
61. he steering wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Albums Use the Scan Up Scan Down buttons to scroll through the albums To play music from a desired album select the album and press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll through the album tracks To play all the tracks in the all the albums select PLAY ALL and press the PRESET UP OK button To play just one track select the track title and press the PRESET UP OK button NOTE If your USB device iPod contains many audio files the ALBUMS menu will be subdivided into alpha betical submenus The alphabetical submenu will display just the first letter of the albums it contains e g A F or it will display the first two letters e g Aa Ar Selection by playlist Playlists stored in your USB device iPod can be dis played with the PLAYLISTS menu To select a playlist using manual interaction proceed as follows Press the y MAIN button to launch the Main Menu and select MEDIA PLAYER then select USB OPTIONS and press the PRESET UP OK button on the rear of the steering wheel Select PLAYLISTS and press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll the play lists To play a displayed playlist select the playlist and press the PRESET UP OK button 52 BLUE amp ME User s Manual Or by using voice interaction
62. he proper selection when I give the com mand Attempt to change the tone syllables or say the command the same way the system says it The BLUE amp ME Voice Recognition commands options are not in normal speech can I change the voice No the voice is an electronic synthesized voice and cannot be changed 110 BLUE amp ME User s Manual BEBE e Can I have 2 phones both paired to the BLUE amp ME BLUE amp ME Media Player Quick Tips system at the same time Yes you can pair up to a total of 5 phones but only one can be linked at anytime The most recently paired mobile phone will be the primary phone Why does the BLUE amp ME system say phonebook copy in progress when I first try to make a call after getting into the vehicle Depending on the size of your phonebook BLUE amp ME may take some time to download or check for updates So if you try to immediately make a phone call after getting into the vehicle the BLUE amp ME system may tell you to wait How do I use the BLUE amp ME Media Player There are three methods Voice Recognition Steering Wheel Buttons located on the front and rear of the steering wheel Using the controls on the device itself Why is the USB Port and AUX Port in the glove box To provide you more security for your personal media devices Even though your media device is in the glove box you can still operate that device by use of
63. he system recognizes a keyword it will respond with the appropriate action Voice recognition is an easy and convenient way to use BLUE amp ME M Al the system functions are available within the BLUE amp ME Main Menu When you are travelling you can interact with BLUE amp ME using buttons on the steering wheel or voice commands relevant only to phone functions LAST CALLS and PHONEBOOK and the media player To activate settings when travelling you can only use voice commands The hands free package enables the following operations e Contact calling by voice you can call a contact in your mobile phone phonebook using your voice You can also call a contact in your phonebook by scanning through the entries on the multifunction display To use this option you have to transfer your mobile phone contacts to the hands free package phonebook Digit dialing by voice you can dial a phone number by pressing the Windows icon button VR button on the steering wheel and speaking the digits to be dialed e To call a SMS text sender call the last SMS text sender directly or the sender of an SMS message received and stored in the BLUE amp ME M inbox BLUE amp ME User s Manual To answer a call you can answer an incoming call by pressing the MAIN Phone button on the steering wheel Conference call you can call another contact while you are engaged in a phone conversation Conference Calling is only suppor
64. honebook to the hands free communication system to use this dialing feature To call a contact in your phonebook using manual interaction proceed as follows Press the MAIN button on the steering wheel to open the Main Menu Use the Scan Up A and Scan Down V buttons on the rear of the steering wheel to select PHONEBOOK and then press PRESET UP OK button on the rear of the steering wheel To select the alphabetical grouping which your contact s name belongs to press the PRESET UP OK on the rear of the steering wheel then select the required contact If the contact has just one phone number press the PRESET OK button or the MAIN on the steering wheel to start the call If the contact has multiple phone numbers use the scan up and scan down buttons on the rear of the steering wheel to view the different phone numbers and then select the required one by pressing the PRESET UP OK button or the MAIN button on the steering wheel to start the call To end the phone call press the PHONE HANG UP button on the steering wheel Or using voice interaction Assume you would like to call the contact John Smith in your mobile phone phonebook Press and say Call John Smith or Call John Smith on at Mobile in the previous statement the keyword Mobile represents the type of phone number you 34 BLUE amp ME User s Manual EBENEN would like to call The phone number type can either be at Home at Wor
65. icating that voice recognition is active say Help BLUE amp ME will speak the list of voice commands available After the general help message is finished say Set tings and then Help BLUE amp ME will speak the list of voice commands available for the Settings menu You can then say or pronounce one of the available commands and proceed with the dialogue as you like If you need additional help press the steering wheel button and say Help again 20 BLUE amp ME User s Manual Pair Your Mobile Phone On your mobile phone search for devices equipped with Bluetooth wireless technology the setting on CAUTION your mobile phone might be called Discover or New um Device In this list you will find BLUE amp ME name BLUE amp ME Hands Free Communication only al identifying the BLUE amp ME system on your car select it lows this operation to be performed when the car is stopped e When prompted by the mobile phone enter the PIN To pair your mobile phone proceed as follows number shown on the instrument panel display using your mobile phone keypad If pairing is successful the system will say Connecting and at the end the display will show a confirmation message the ID of the paired mobile phone Press the steering wheel button and say Set tings then at the end of the BLUE amp ME M message say Pairing e The system will show the phone pairing PIN number
66. in your mobile phone phonebook so that you can use them with the hands free phone If your phonebook is empty quickly create several new entries for frequently dialed phone numbers For further details consult your mobile phone owner s manual To properly enter contacts in your mobile phone phone book refer to SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Important Notes e The phonebook copied to BLUE amp ME can only be used when the corresponding mobile phone is paired and connected en BLUE amp ME User s Manual Once a mobile phone is paired to the BLUE amp METM system the phone will automatically connect disconnect to the BLUE amp ME system whenever the ignition is turned to ON OFF All of the BLUE amp ME features are fully functional when the phone is con nected to BLUE amp ME NOTE Some mobile phones may require you to accept the BLUE amp ME connection depending on the mobile phone settings Entries stored in SIM card or mobile phone memory can be transferred to BLUE amp ME with different procedures according to your mobile phone model Try Out the Voice Commands At each stage of your dialogue with the system you can always use the voice command Help to get detailed indications about the voice commands available 19 To try out the Help function proceed as follows Press gvr steering wheel button After BLUE amp ME says Say a command and plays a tone ind
67. ire voice announcement press the Avr steering wheel button and speak your command after the prompt To stop an ongoing interaction press the ESC but ton You will hear a tone indicating when voice recogni tion is deactivated The hands free communication Help option can speak the list of commands available to you at any time depending on the keyword level that you are currently on To use the Help system say Help Listen to the list of currently available commands and decide on which command you d like to issue to the system Adjust the volume of phone calls to a level that is comfortable and safe while the car is in motion To adjust the default volume of BLUE amp ME refer to EXTERNAL AUDIO VOL function in the Owner s Manual on the DVD To temporarily adjust the volume of the current phone call press or or adjust the position of the radio knob After the phone call is disconnected the volume will revert back to the original level You can press Vol or Vol buttons on the rear of the steering wheel also to adjust the volume of the current BLUE amp ME voice announcement Please remember that to interrupt a voice announcement you can always press the steering wheel button at any time during a voice interaction and give a new voice command e After you press the steering wheel button if you do not issue a voice command within a few seconds the system will prompt you to say a voice com
68. ired folder and press the PRESET UP OK button Scroll the selected folder tracks To play a desired track select the title and then press the PRESET UP OK button on the rear of the steering wheel Or by using voice interaction Press the VR steering wheel button and say Media Player then after the beep say Advanced USB op tions and finally after the beep say Folders Use the Scan Up Scan Down buttons to scroll through the folders To play all song tracks in all folders select PLAY ALL and then press the PRESET UP OK button To display folder tracks press the PRESET UP OK button Scroll the selected folder tracks To play a desired track select the title and then press the PRESET UP OK button on the rear of the steering wheel NOTE For further details on FOLDERS or menu customization refer to PRACTICAL HINTS FOR USING THE MEDIA PLAYER Selection by artist To select a specific artist s song tracks proceed as follows Press the MAIN button to launch the Main Menu and select MEDIA PLAYER and then select USB OP TIONS and press the PRESET UP OK button on the rear of the steering wheel Select ARTISTS and then press the PRESET UP OK button Use the Scan Up Scan Down buttons to scroll through the Artists To play music from a desired artist select the artist and press the PRESET UP OK button ee BLUE amp ME User s Manual 49 Or by using voice interaction Press the Avg steering
69. is recom mended to use USB devices with maximum capacity of 32 GB You can scroll audio files by folder artist genre album or playlist and then select the desire category using voice commands After selecting the desired category select the desired file using the manual controls To surf your media library use the track data e g title artist album genre USB sticks can also be surfed in folders mode NOTE e Not all formats can support media information The mp3 and wma aac recognized formats by BLUE amp ME can support media information whereas the wav format files do not BLUE amp ME will popu late the title field in the index with the filename as the track name for the folder option e For further details refer to PRACTICAL HINTS FOR USING THE MEDIA PLAYER Selection by folder Track folders on your USB device iPod are displayed in the FOLDERS menu not available for most iPods To select tracks through manual interaction proceed as follows Press the MAIN button to launch the Main Menu and select MEDIA PLAYER then select USB OPTIONS and press the PRESET UP OK button on the rear of the steering wheel Select FOLDERS then press the PRESET UP OK but ton 48 BLUE amp ME User s Manual Use the Scan Up Scan Down buttons to scroll through the folders To play all song tracks in all folders select PLAY ALL and then press the PRESET UP OK button To display folder tracks select the des
70. k or on at Other If the name is recognized the system will display the recognized contact s information John Smith in this example on the display screen If John Smith has just one phone number the system will ask if you would like to call John Smith To start the call say Yes otherwise say No If John Smith has several phone numbers the system will ask which phone number you would like to call e g Call John Smith at Work or at Home Answer with the type of required phone number e g at Home If John Smith has several phone numbers but the loca tion i e the type of phone number like work home etc is missing the system will display the selected contact and a list of related phone numbers To call the displayed phone number say Call If the contact is correct but the phone number is wrong you can scroll through the phone number list manually by pressing Scan Up A and Scan Down V buttons on the rear of the steering wheel When you find the required number press the MAIN button on the steering wheel to start the call To end the phone call press the PHONE HANG UP button on the steering wheel Practical hint When you call a contact with multiple phone numbers use the at location portion of the voice command e g at Home at Work on at Mobile This will shorten the number of steps required to make the phone call ee BLUE amp ME User s Manual 35
71. ld playlists for BLUE amp ME refer to PRACTICAL HINTS FOR USING THE MEDIA PLAYER ee BLUE amp ME User s Manual 73 Note on brands Microsoft and Windows are registered trademarks of Microsoft Corporation Sony is a registered trademark of Sony Corporation Ericsson is a registered trademark of Telefonaktiebolaget LM Ericsson Motorola is is registered trademark of Motorola Inc Nokia is a registered trademark of Nokia Corporation Siemens is a registered trademark of Siemens AG Orange is a registered trademark of Orange Personal Communications Services Limited Audiovox is a registered trademark of Audiovox Corporation Bluetooth is a registered trademark of Bluetooth SIG Inc Lexar and JumpDrive are registered trademarks of Lexar Media Inc SanDisk and Cruzer are registered trademarks of SanDisk Corporation iPod iTunes and iPhone are registered trademarks of Apple Inc All other trademarks are the property of their respective owners Works wit Apple is not responsible for the operation of this 0 iPhone device or its conformity with the regulatory and sa fety standards brb 37347 74 BLUE amp ME User s Manual LIST OF AVAILABLE VOICE COMMANDS The following tables list the voice commands available on BLUE amp ME Hands Free Communication The key word for each voice command e g the main voice command and the synonyms that may be used are shown BLUE amp ME
72. llations should be checked for possible interfer ence between the communications equipment and the vehicle s electronic systems Chrysler Group LLC Ii 12FMB 726 AE 5th Edition Printed in U S A
73. mand If you do not respond after two or three prompts to enter a command the voice recognition session will end It is the same case with not responding to a question during a voice interaction You will hear a tone indicating when voice recognition is deactivated When the system fails to recognize your voice com mand it will give you another opportunity to say the voice command again If you are unsure of whether the voice command is appropriate for the given con text say Help en BI UE amp ME User s Manual NOTE 27 Using Voice Recognition The voice recognition system may occasionally mis recognize a voice command To ensure that your voice commands are always recognized by the system use the following guidelines After pressing the steering wheel button say the voice command after the system says Say a Com mand and plays a tone indicating that voice recogni tion is active After the system asks a question begin saying your command If you want to say a command without waiting for the system to finish its announcement or question you can press the steering wheel button again shortly to interrupt what the system is saying and say your command Speak at a normal volume 28 BLUE amp ME User s Manual Say words clearly in your natural voice at a moderate pace without stops If possible try to minimize background noise in the car Ask the other passengers to keep silent
74. means that your mobile phone supports single contact download with Bluetooth wireless tech nology After the pairing process you will need to go to the USER DATA ADD CONTACTS menu to send phone book contacts from your mobile phone to BLUE amp ME 70 BLUE amp ME User s Manual BEBE Mobile phones with message reader not all Supported digital audio files mobile phones support reading incoming SMS The media player supports audio files with the following messages formats If your mobile phone can send messages through the Eytension Audio Coding Bluetooth wireless technology it is possible to read ma Windows Media Audio Decode incoming messages using the BLUE amp ME Hands Free Format Tag WMA2 353 Communication Package to store them in the dedicated WMA1 352 Decodes all CBR pro inbox or to delete them files from 5kbps to 192kbps 8kHz to 48kHz mono and stereo De SUPE Pace ASE Memory Devises codes all v9 CBR profiles from USB Memory Devices 5kbps to 320kbps 8kHz to 48kHz The media player supports most USB memory devices mono and stereo Decodes all qual 1 0 1 1 or 2 0 ity based bit rate based and peak constrained VBR profiles Supports NOTE It is not possible to use USB devices equipped WMA v1 WMA v2 bit streams with a password function BLUE amp ME User s Manual 71 Extension Audio Coding mp3 in two forms MPEG 1 Layer 3 sampling rates 32
75. mp ME Main Menu Dial the number displayed on the display that was accessed haptically from the phonebook or the recent calls list Accept an incoming phone call e Switch between two ongoing phone conversations call waiting e Dial the name number on the display that was selected entered by voice recognition X ESC e Cancel voice recognition Cancel a voice announcement nterrupt message reading Exit BLUE amp ME Main Menu e Exit the sub menu and return to the previous menu option Exit current menu option without storing settings e Turn the microphone on off during a phone conversation Mute the ring tone of an incoming call Media player Pause on off ee BLUE amp ME User s Manual 17 Button Short press function less than 1 second Long press function more than 1 second VOICE RECOG NITION VR Activate voice recognition Interrupt voice announcement to provide a new voice com mand Repeat the last utter ance in a voice inter action PHONE HANG UP PRESET UP OK left side back of steering wheel Reject an incoming call and end a phone call in progress e End an active call and switch to a call waiting on hold Confirm manually selected menu option e Switch phone conversation from the hands free phone to your mobile phone and vice versa e Select displayed message SCAN A SCAN DOWN V left side back of steering whe
76. ms remove the USB device using the option Secure hardware removal ee BLUE ME User s Manual 99 iPod Problem iPod is not working for iPod classic models prior to the 5th generation the iPod Mini and iPod shuffle devices iPod not working for iPod classic models from the 5th generation forward iPod Touch and iPhone Probable Cause The iPod has not been enabled for use as a disc e It has been enabled for use as a disc but there are tracks inside in Mp4 for mat these formats are not supported by BLUE amp ME e There are DRM protected tracks on the iPod purchased from the iTunes site the system does not support pro tected tracks such as those in DRM format that can be purchased from the iTunes store site Possible Solution Use an alternative USB memory stick or reset the iPod Enable usage as a disc Modify the track format to one that is compatible with BLUE amp MET M Use an alternative USB memory stick or reset the iPod devices 100 BLUE amp ME User s Manual EBENEN Problem Probable Cause Possible Solution iPod continues playing the The repetition function for each indi There is a specific item in the menu like same track or the forward vidual track may have inadvertently continuous play or individual track button has to be pressed to been activated repetition which must be deactivated move on to the next e When bro
77. nds free package gives you the possibility of interacting vocally with your mobile phone while driving even if your mobile device does not feature this capability You can also interact with your mobile phone manually and visually using the steering wheel controls and the instru ment panel multifunction display For further details on the mobile phones supported by BLUE amp ME refer to BLUE amp ME SUPPORTED MO BILE PHONES To get started with BLUE amp ME Hands Free Communi cation with voice recognition you have to simply pair your Bluetooth wireless technology enabled mobile phone with the system Pairing is an operation that has to be performed only once NOTE e During the mobile phone pairing procedure BLUE amp ME attempts to detect a phone equipped with Bluetooth wireless technology within range and then establishes the connection using a Personal Iden tification Number PIN ee BLUE amp ME User s Manual 7 Once your phone is paired you have the option to transfer your mobile phone contacts to the hands free package to make a phone call either by using the contacts list or directly pronouncing the phone num ber to answer a call and also answer a second incoming phone call To interact with BLUE amp ME you can use either buttons on the steering wheel or voice commands With voice recognition you can perform system func tions by speaking voice commands also identified as keywords When t
78. ne without having to take your eyes off the road You can even keep your phone in a pocket or a bag You are not required to train the voice recognition system to recognize your voice The system is speaker indepen dent and performs equally well for different users With this system you can also play your favorite music stored on a USB stick or iPod and select tracks and playback modes with both voice commands or buttons on the steering wheel This device complies with Part 15 of the FCC rules subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept all interference received including interference that may cause undesired operation The BLUE amp ME Hands Free Communication Package The basic characteristic of this hands free package is voice recognition with Bluetooth wireless technology With this system you can make and receive calls safely 6 BLUE amp ME User s Manual BEBE and securely using either voice commands or buttons on the steering wheel under any driving condition without having to take your eyes off the road or removing your hands from the steering wheel as required by current legal regulations Bluetooth wireless technology enables wireless connec tion between your mobile phone and the hands free package installed on your car To use the hands free package you need a Bluetooth wireless technology enabled mobile phone This ha
79. non verbally using your hands while driving Stop the car in a safe and legal manner before attempt ing these operations This is important since while setting up or changing some functions you might be required to distract your attention away from the road and remove your hands from the wheel Continued the system may be accomplished using only voice commands Using voice commands while driving allows you to operate the system without remov ing your hands from the wheel Prolonged Views of Screen do not access any function requiring a prolonged view of the screen while you are driving Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention Even occasional short scans to the screen may be haz ardous if your attention has been diverted away from your driving task at a critical time Continued BLUE amp ME User s Manual 13 WARNING Continued e AND BUTTONS ON THE STEERING Volume Setting do not raise the volume exces sively Keep the volume at a level where you can Display still hear outside traffic and emergency signals while driving Driving while unable to hear these sounds could cause an accident Use of Speech Recognition Functions speech rec ognition software is inherently a statistical process which is subject to errors It is your responsibility to monitor any speech recognition functions in cluded in the system and ad
80. nswer choose between automatic incoming button will automatically activate call transfer to the system or non the hands free communication automatic incoming call transfer function the caller s voice is you will transfer the call using the played through the car speakers mobile phone keypad as required Pairing a paired mobile phone e Before re pairing with a mobile the display screen shows Pair phone information from the previ failed and the system says Pair ous pairing on BLUE amp ME must ing unsuccessful Please try be deleted again Possible Solution Refer to your mobile phone owner s manual to find out how to set up the default location for phone audio when a phone call is received e Remember that the pairing proce dure will only need to be per formed once for your mobile phone After this procedure BLUEKME will automatically connect to your phone each time you get into the car and turn the ignition key to ON To pair the phone again select DE LETE USERS and then re pair the phone see the section SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK and also the section SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE 90 BLUE amp ME User s Manual EBENEN Problem During the downloading of the phonebook from the mobile phone contacts middle names initials prefixes or suffixes are not recognized by the voice rec ognition system national dialing codes e g 39 Italy 44 UK
81. o your mobile phone owner s manual 62 BLUE amp ME User s Manual e If you download a phonebook with a contacts list including more than 1000 contacts the system may operate slower than expected and voice recognition of the names in your phonebook may be degraded e If the pairing list is accidentally deleted the pairing procedure will be repeated Managing User Data You can manage the user data used by BLUE amp ME by entering the USER DATA menu The phonebook can be deleted all paired phones and their associated phone book data can be deleted or all data can be deleted If all data is deleted then the memory in BLUE amp ME will be restored to it s initial empty condition If the phonebook had not been previously downloads during the phone s initial pairing then you can choose to download it now or you can copy individual contacts from you phone to BLUE amp ME Not all phones support phonebook down loading or copying individual contacts Consult www fiatusa com for further information on the list of com patible mobile phones To open the USER DATA menu using manual interac tion proceed as follows Press the MAIN button to open the Main Menu then select SETTINGS by pressing the PRESET UP OK but ton Select the USER DATA and then press the PRESET UP OK button Or using voice interaction Press the button and say Settings Wait until after the tone then say User data In th
82. of the steering wheel to read the last message received e Say No or press the ESC button on the steering wheel the system will store the message so you can read it later For further details on the message reader SMS refer to the section MESSAGE READER FUNCTIONS NOTE If you encounter difficulties with any of the message reader settings refer to MESSAGE READER TROUBLESHOOTING MEDIA PLAYER QUICK REFERENCE GUIDE To start playing the digital audio files stored on your USB stick or iPod proceed as follows e Copy tracks to your USB stick BLUE amp ME recognizes wma mp3 wav and aac formats for audio files and wpl and m3u formats for playlists e USB sticks without USB wire just connect the USB stick directly or by an extension lead to the USB port in the glove box of the car BLUE amp ME User s Manual 23 e USB sticks with USB wire use the wire to connect the USB stick to the USB port on the car e Turn the ignition key to ON BLUE amp ME will auto matically start to play your digital tracks selecting them from the library that was built when the USB stick was connected After BLUE amp ME has built the library containing your digital audio files you can select and play tracks albums artists and playlists by interacting manually or verbally with BLUE amp ME Building the library may require a few minutes if your USB stick contains several files NOTE Depending on the numb
83. ommand then immediately after press the Avr steering wheel button again and say your second command Example Press the steering wheel button and say Settings then as soon as you hear the beep press the steering wheel button again and say Pairing en BI UE amp ME User s Manual e The BLUE amp ME VR Voice Recognition Speech vol Every time I get in the vehicle my mobile phone alerts me or notifies me about connecting to BLUE amp ME but I ve already paired my mobile phone The issue needs to be fixed through your phone settings You need to set your phone to not prompt you with this request never prompt never ask the ques tion or trusted source This will allow you to automatically reconnect the next time Why am I not able to pair my mobile phone Most devices are supported However you should refer to the list of supported phones blackberries at the www fiatusa com website and click the BLUE amp ME icon Or contact the FIAT Customer Center at 1 888 CIAO FIAT 1 888 242 6342 to make sure your mobile phone is supported 109 ume is Too Loud Too Quiet This is a customer selectable feature To change the Speech volume Press the MENU button on the Radio The use the Up and Down arrows to select the Speech Volume setting Use the Right and Left arrows to increase or decrease the Speech volume The BLUE amp ME VR Voice Recognition system fails to make t
84. ription Of Other Rights And Limitations cles 103 Upgrades And Recovery Media 106 Intellectual Property Rights 106 Export Restrictions 106 What Can I Do With My BLUE amp ME Hands Free Communication Package 108 BLUE amp ME Hands Free Communication Quick ps iue sese eed uere e dcr his 108 4 BLUE amp ME User s Manual Sx lll Quick Tips Frequently Asked Questions 108 BLUE amp ME Media Player Quick Tips 110 BLUE amp ME Message Reader Quick Tips 111 BLUE amp ME And The Tomtom PND Portable Navigation Device If Equipped Quick Tips dee er repe 112 DIUE amp ME User s Manual 5 OVERVIEW FIAT s Windows Mobile based BLUE amp ME Hands Free Communication is a personal telematics system that incorporates communication and entertainment applica tions that are expressly designed for use in your car The BLUE amp ME Hands Free Communication package installed in your car is equipped with integral hands free kit message reader and media player BLUE amp ME is designed to support the future installation of additional services The BLUE amp ME Hands Free Communication package features integrated voice recognition steering wheel con trols and a multifunction electronic display that allows you to use your Bluetooth wireless technology enabled mobile pho
85. s responding to incoming calls re dial callback call wait ing reading a message or deleting it NOTE If you encounter difficulties with any of the voice recognition operations refer to HANDS FREE COM MUNICATION PACKAGE TROUBLESHOOTING Before you can make and receive phone calls using the hands free communication package you must create a pairing relationship for your mobile phone For further information refer to SETTING FUNC TIONS PAIRING A MOBILE PHONE To activate the hands free communication package the ignition key must be turned to the ON position If during a phone call you turn the ignition key to STOP you can continue your conversation through the hands free communication package for another 15 minutes After 15 minutes BLUE amp ME will sound a warning tone and will transfer the call to the mobile phone Making a Phone Call You can make a phone call using one of the following methods Calling a contact in your phonebook Dialing a phone number using voice commands Dialing a phone number using the mobile phone keypad Calling a phone number using call history recent calls Calling the sender of a received SMS message NOTE For further information refer to FUNCTIONS OF SMS MESSAGES READER paragraph SMS MES SAGES MANAGEMENT ee BLUE amp ME User s Manual 33 Calling a contact in your phonebook It is a requirement that you create a pairing relationship and download your mobile phone p
86. s following If power is interrupted e g car the instructions given by your battery disconnection inedia file software BLUE amp ME will rebuild the Remove the USB device from the USB port and replace it to rebuild the media library again Check whether your USB device is supported by BLUE amp ME M e Set Autoplay to on remove and then replace the USB device Press the button and say Play Media playback should start BLUE amp ME User s Manual 95 Problem After inserting a USB device and turning the car key to the ON posi tion BLUE amp ME malfunctions occur e g failure to reproduce mu sical tracks or no voice messages Probable Cause You may have used a USB device with the PASSWORD function enabled Possible Solution e Use another USB device without a password protection function Problem Displayed message NO PLAY LISTS and BLUE amp ME says No playlist found Displayed message PLAYLIST ER ROR and BLUE amp ME says Play list error Probable Cause No playlist is stored on the USB device connected Playlist is damaged or invalid Possible Solution Build a playlist on your computer using your media file software and then copy it to your USB device e Make sure the playlist is in m3u or wpl format Build the playlist again following the instructions given in BUILDING PLAYLISTS FOR BLUE amp ME PRACTICAL H
87. ssed after automatic recognition of your Bluetooth wireless technology enabled mobile phone NOTE For further details on how to delete personal data and phonebook refer to SETTINGS FUNCTION MANAGING USER DATA e Stored personal data can be deleted using specific BLUE amp ME functions SYSTEM SOFTWARE USE NOTICE This system contains software that is licensed to Manu facturer pursuant to a license agreement Any removal reproduction reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action NOTE For further details on how to delete personal data refer to SETTINGS FUNCTION MANAGING USER DATA 102 BLUE amp ME User s Manual EEEEEEEEEEEEEEIEIEIESISIZIINIZXANEEEEEEEEE NN WARNING CENSE AGREEMENT EULA DO NOT USE THE Hacking the BLUE amp ME device or installing unap DEVICE OR COPY THE SOFTWARE INSTEAD proved software may lead to warranty voiding and PROMPTLY CONTACT FIAT AUTO S p A FOR IN compromises of safety and of the security of stored STRUCTIONS ON RETURN OF THE UNUSED DE information VICE S ANY USE OF THE SOFTWARE INCLUD ING BUT NOT LIMITED TO USE ON THE DEVICE END USER LICENSE AGREEMENT EULA WILL CONSTITUTE YOUR AGREEMENT TO THIS be NM EULA OR RATIFICATION OF ANY PREVIOUS You have acquired a device DEVICE which in CONSENT cludes software license
88. system eae A ond beep when a new SMS text message recewed Vam panel disploy whee a tw SMS txt message received brb 63436 BLUE amp ME User s Manual 79 TABLE OF MEDIA PLAYER VOICE COMMANDS Meda player 1 ee Opens the MEDIA PLAYER menu Phy mus Starts plome dena audo fies Pay Seng Pay Mubimedia Fics Stage piyay ipid azdi des Next rok Goer to prenos trok Stelle on P Fela oa Shullic Tums the staffe function on Activate Shuttle Sne off Turn off Shuffle Tums the shuffle funcson aff Desctivets Shoe contend E gt brb 63437 80 BLUE amp ME User s Manual BEBE gt Repeat On egeat song Turn on Repast Turns the repeat function on Sang Reprmat peat OF op Turns the Repeat function off Turn ott Repeat at valo Song Repwat 1 Activate Autoplay Automotcaly starts audo playback when a USB plapged n Autoplay Auxoply off turn off Autoplay Deatirralw Auloplay Pasoply Stops automascally playing the audio rock when the USB device plugged in brb 63438 CD contewed E ching Storts playing dl digital voks Random On USB media USB seuings Opens the MEDIA PLAYER Opens the Medic Player FOLDERS menu Opens the Media Player ARTISTS menu Opens the Medio Player GE
89. t the INBOX option then press the PRESET UP OK button on the rear of the steering wheel Scroll stored messages and select the desired one the system will display the SMS text senders identification data if avail able Select READ and press the PRESET UP OK button on the rear of the steering wheel BLUE amp ME will read the selected message ee BLUE amp ME User s Manual 43 Or using voice interaction Press the steering wheel button and say Message reader after the audible tone say Inbox BLUE amp ME will display the text sender s identification data for the first message contained in the inbox and also the phone number of the SMS text sender if stored in the phonebook To scroll the Inbox say Previous or Next when the required message is displayed say Read BLUE amp ME M will read the selected message Say Delete to delete the selected message Managing Messages For every message received while BLUE amp ME is con nected to your phone BLUE amp ME can m read the message call the sender directly m delete the message To access these options when reading a message open the BLUE amp ME Main menu and then press the PRE SET UP OK button on the rear of the steering wheel to select the desired option Or using voice interaction Press the vr steering wheel button and say Read or Call or Delete the system will perform the desired option Deleting All Messages
90. ted by a compatible mobile phone Call waiting while engaged in a phone conversation you can receive notification of another incoming phone call answer the other incoming phone call and switch between two ongoing phone conversations Call waiting is only supported by a compatible mo bile phone Refusing an incoming call or ending a call you can refuse an incoming call or end a current call by pressing the Phone Hang up button on the steering wheel With your mobile phone in the vehicle and the pairing procedure complete connect to your mobile phone to BLUE amp ME and you can make phone calls by speaking keywords or pressing buttons on the steering wheel When using the hands free phone the audio output of a phone conversation is heard through your car s speakers Message Reader The BLUE amp ME message reader enables automatic reading through the car sound system of the SMS texts you receive on your Bluetooth wireless technology enabled mobile phone that are received when the phone is paired and connected to BLUE amp ME system The message reader does not provide access to messages that were received before you entered the car and connected with the BLUE amp ME system Only a subset of abbre viations and emoticons are supported by the BLUE amp ME system BLUE SME User s Manual 9 NOTE Not all mobile phones support the SMS text message reader function or automatic phonebook trans fer
91. texts Media Player With the BLUE amp ME media player you can play via the car sound system digital audio files stored on a USB stick or iPod by simply connecting it to the USB port located in the glove box of the car With this feature you can play your favorite personal music collections while you drive e iPod player refer to MEDIA PLAYER FUNCTIONS The media player feature allows the following opera tions e Digital audio playback you can play all your digital audio files mp3 wma wav aac or play a customized playlist m3u or wpl format e Audio file selection by category you can play all audio files of a certain category e g album artist or genre NOTE Each audio file category must be tagged before connecting to the BLUE amp ME system If no category is tagged the BLUE amp ME system will index the song by the song title Playback options while playing tracks you can select the following options Play Stop Next track Previous track Shuffle and Repeat NOTE e The media player does not support audio files com pressed with other formats and DRM Digital Right Management protected audio files Non supported audio files that may be present on the USB device will be ignored en UE amp ME User s Manual 11 To use the media player you have to simply connect Road Safety directly or by an extension lead your USB stick or WARNING iPod to the car USB port When the i
92. tion manual Scrolling Building the media library on BLUE amp ME e To optimize scrolling of the FOLDERS menu organize Hands Free Communication folders on your USB stick before connecting it to BLUE amp ME To facilitate and to optimize FOLDERS Building the media library may require a few minutes menu selection organize your tracks in folders with If the time required is excessive you can intervene by names that mean something to you reducing the number of audio files stored on your USB device iPod Organize media files e While building the library it is possible to play a random track selection BLUE amp ME will build the library while playing music e In order to make the musical selection on BLUE amp ME based on predefined selection criteria author album type etc information contained in 56 BLUE amp ME User s Manual Building playlists for BLUE amp ME Hands Free Communication For building m3u or wpl playlist for BLUE amp ME using Microsoft Windows Media Player proceed as follows e Copy required tracks into a new folder or to your USB memory device e Open Microsoft Windows Media Player Select File and then Open from the menu e Scroll the content of the USB device iPod connected to your computer and select the audio files to be entered in the playlist only available on certain iPod devices Click on Open e Move to File and select Save Now Playing List As
93. tion to others but not in a form that personally identifies you 104 BLUE amp ME User s Manual BEBE Termination Without prejudice to any other rights Internet Based Services Components The SOFT WARE may contain components that enable and facili tate the use of certain Internet based services You acknowledge and agree that FIAT Auto S p A s Soft ware Suppliers their affiliates and or their designated agent may automatically check the version of the SOFTWARE and or its components that you are uti lizing and may provide upgrades or supplements to the SOFTWARE that may be automatically down loaded to your DEVICE Additional Software Services The SOFTWARE may permit FIAT Auto S p A FIAT Auto S p A s Software Suppliers their affiliates and or their designated agent to provide or make available to you SOFTWARE updates supplements add on components or Internet based services components of the SOFT WARE after the date you obtain your initial copy of the SOFTWARE Supplemental Components e If FIAT Auto S p A provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components then the terms of this EULA shall apply If FIAT Auto S p A s Software Suppliers their affili ates and or their designated agent make available Supplemental Components and no other EULA terms are provided then the terms of this EULA shall apply except that the FIAT Au
94. to S p A s Software Suppliers or affiliate entity providing the Supplemental Component s shall be the licensor of the Supplemental Component s FIAT Auto S p A FIAT Auto S p A s Software Suppliers their affiliates and or their designated agent reserve the right to discontinue any Internet based services provided to you or made available to you through the use of the SOFTWARE en BI UE amp ME User s Manual 105 e Links to Third Party Sites The SOFTWARE may provide you with the ability to link to third party sites through the use of the SOFTWARE The third party sites are not under the control of FIAT Auto S p A s Software Suppliers their affiliates and or their designated agent Neither FIAT Auto S p A s Software Suppliers nor their affiliates nor their designated agent are responsible for i the contents of any third party sites any links contained in third party sites or any changes or updates to third party sites or ii webcasting or any other form of trans mission received from any third party sites If the SOFTWARE provides links to third party sites those links are provided to you only as a convenience and the inclusion of any link does not imply an endorse ment of the third party site by FIAT Auto S p A s Software Suppliers their affiliates and or their des ignated agent 106 BLUE amp ME User s Manual BEBE UPGRADES AND RECOVERY MEDIA If the SOFTWARE is provided by FIAT Auto S p A separ
95. u are licensed to use only one 1 copy of the SOFTWARE No Rental Except as authorized by FIAT Auto S p A you may not rent lease or lend the SOFTWARE SOFTWARE Transfer You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE provided you retain no copies you transfer all of the SOFTWARE including all component parts the media and printed materials any upgrades this EULA and if applicable the Cer tificate s of Authenticity and the recipient agrees to the terms of this EULA If the SOFTWARE is an upgrade any transfer must include all prior versions of the SOFTWARE FIAT Auto S p A or FIAT Auto S p A s Software Suppliers may terminate this EULA if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the SOFT WARE and all of its component parts Consent to Use of Data You agree that FIAT Auto S p A s Software Suppliers their affiliates and or their designated agent may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE FIAT Auto S p A s Software Suppliers their affiliates and or their designated agent may use this information solely to improve their products or to provide customized services or technologies to you FIAT Auto S p A s Software Suppliers their affiliates and or their desig nated agent may disclose this informa
96. umbers the system will ask which phone number you would like to call e g Call John Smith at Work or at Home Answer with the type of required phone number e g at Home If John Smith has several phone numbers but the loca tion e g the type of phone number like work home etc is missing the system will display the selected contact and a list of related phone numbers on the instrument cluster display The hands free communica tion system will ask if you would like to call the phone number displayed To respond with yes say Yes otherwise say No You can also scroll through the phone number list manually by pressing the buttons on 22 BLUE amp ME User s Manual the back of the steering wheel until you find the required number Then press the PRESET UP OK button on the rear of the steering wheel to start the call e To end the phone call press the PHONE HANG UP e button on the steering wheel NOTE If you encounter difficulties with any of the voice recognition operations refer to HANDS FREE COMMU NICATION PACKAGE TROUBLESHOOTING MESSAGE READER QUICK REFERENCE GUIDE If your Bluetooth wireless technology enabled mobile phone supports the message reader function at the arrival of a new SMS text BLUE amp ME plays a tone and it will ask if you would like to read it e Say Yes or press the MAIN button on the steering wheel or the PRESET UP OK button on the rear
97. unch the BLUE amp ME Main Menu press the N MAIN button on the steering wheel you can then interact with the system using the steering wheel buttons Navigating the menu options To navigate through the items in a menu press the scan up or scan down buttons on the rear of the steering wheel When the number of characters in a display message is too long for the allowable number of display characters the text in the display message will be cut to fit the display size To select the option shown on the display press the PRESET UP OK button on the rear of the steering wheel To quit the selected option or to exit a submenu press X ESC BLUE amp ME HANDS FREE COMMUNICATION FUNCTIONS BLUE amp ME Hands Free Communication lets you make and receive phone calls on your Bluetooth wireless technology enabled mobile phone using voice commands keywords or the steering wheel buttons By using the voice commands you can make calls to people in your phonebook by pronouncing their first and or last name or you can make phone calls to numbers not stored in your phonebook by pronouncing the digits of the phone number or calling the last message sender By using steering wheel buttons you can make phone calls to people in your phonebook or call history list by selecting the associated item in the RECENT CALLS or PHONEBOOK submenus 32 BLUE amp ME User s Manual In addition you can use other calling features such a
98. via Bluetooth Consult www fiatusa com for further information on the list of compatible mobile phones Message reader functions are managed by the control buttons on the steering wheel or by the BLUE amp ME voice commands The BLUE amp ME message reader enables the following operations e To display on the instrument panel multifunction display a visual notification signal indicating that you have received a new SMS text on your Bluetooth wireless technology enabled mobile phone with send er s number name BLUE amp ME will also ask whether to read you the message that has been re ceived e To manage the list of SMS texts received on your BLUE amp ME paired mobile phone NOTE Only messages that were received while the mobile phone was connected to BLUE amp ME will be listed e To read the messages received and stored Messages can be read multiple times e To call the SMS text sender using the buttons on the steering wheel or voice commands e To delete individual messages or the entire inbox using the buttons on the steering wheel or voice commands NOTE Messages are to only be deleted by the BLUE amp ME system and not by your mobile phone 10 BLUE amp ME User s Manual The BLUE amp ME system can also recognize and read abbreviations if any e g ILUVU will be read I love you and can interpret most common emoticons e g will be read Smile used today to write SMS
99. while another phone conversation is active press the MAIN button on the steering wheel The system will switch to the incoming phone call and put the current phone conversation on hold NOTE e Not all mobile phones and carriers support this fea ture Contact the FIAT Dealership or consult the www fiatusa com website for compatible mobile phones e Certain mobile phones support the ability to transmit your contact s ring tones to the hands free communi cation system and play customized ring tones for incoming phone calls In this case the incoming phone calls will have your mobile phone customized ring tones The ring tone format must be compatible with the type of audio files that BLUE amp MET supports Managing Phone Calls Transferring a phone conversation from your mobile phone to the hands free communication system If you enter the car during a phone conversation from your mobile phone and you want to continue the con versation using the car hands free communication sys tem you can transfer the phone conversation to it Proceed as follows e Get into the car and turn the ignition key to ON to activate the hands free communication system e If the permissions on the phone are set to allow an automatic connection the conversation will be trans ferred automatically Otherwise the system will send a message to your mobile phone offering hands free phone support 40 BLUE amp ME User s Manual e To
100. wsing music by a selecting Proceed with the deactivation playback mode the selected artist e press the controls activation button on album genre or playlist may contain the steering wheel only 1 track when requested by the system say Repeat Off in a clear tone e wait for voice confirmation by the sys tem which will say Repeat Off e wait for voice confirmation by the sys tem which will say Repeat Off Se lect another playback mode or use the Play Anything voice recognition command The iPod connected to the When the ignition is ON the car re Remember that your iPod must have BLUE amp ME is not charges the iPod unless the iPod is some charge or wait a few minutes charged completely run down until the system recharges it en BLUE ME User s Manual 101 PERSONAL DATA PROTECTION CAUTION BLUE amp ME Hands Free Communication functions en tail personal data handling In order to protect and to Take into account that when leaving your car at a prevent non authorized access to personal data service center personal data stored on BLUE amp ME BLUE amp ME has been implemented with the following phonebook and last calls may be disclosed or may criteria be subject to improper use Before leaving your car at the service center you can delete stored data and e Personal data connected to hands free communication phonebook from BLUE amp ME M functions phonebook and last calls can only be acce

2012 Fiat Blue&Me Supplement

Contents

Download Pdf Manuals

Related Search

Related Contents

2012 Fiat Blue&amp;Me Supplement

Contents

Download Pdf Manuals

Related Search

Related Contents

2012 Fiat Blue&Me Supplement