fixed frame website version.indd
Contents
1. ELUNEVISI Elara Fixed Frame Series Instruction Booklet EluneVision Inc 25 Thornton Trail Dundas Ontario LOH 6X9 www EluneVision com Parts List A X12 GX4 BX 12 H X 4 CX 16 DX16 IX 4 EX1 F X depends on screen size JX4 Tools Required Philips Screwdriver a Level for hanging the screen and hammer rubber mallet Metal Rods Screen Materia Plastic Rods Frame Rails 2 long 2 short 2 long 2 short 2 long 2 short Installation Procedure Step 1 eUnpack the screen eCheck that all parts are present eMake sure to have 2 people install the screen eAssembly requires a clean area of approximately 2 feet of extra space added to the dimensions of assembled screen on each side eUnwrap screen rails then lay screen rails out upside down Step 2 eSlide part H the L bracket into the short frame rail do this 4 times on each end of the 2 short frame rails like photo below each side First unwrap screen material to determine how many tension ing screws need to go into the frame rails You do this by look ing at how many holes are on the sides of the screen material Then insert the correct amount tensioning screws F part into the 4 frame pieces Then insert 2 nuts Part A into each end of the longer frame piece and 1 nut into the each end of the short er frame piece Once completed it should look like the photo above Step 4 In this step place all 4 frame pieces to2. gether and then place part D and C into the 4 holes in each corner Use part E to do so After that is completed it should look like the photo above Step 5 Carefully unroll the fabric make sure the viewing side is placed on a clean surface to avoid getting the screen dirty Place the four metal rods into the sleeves of material starting with the shorter sides first Step 6 Place the fabric into the tensioning screws Use a philips screw driver to tension all the screws and make sure the fabric is per fectdly flat DO NOT OVER TENSION Place Part G on the corner of the screen and then place part I on top Line up the nuts on the frame rail to the holes on I Place 3 B screws on each corner Repeat this process 4 times on each corner The end result should look like the photo above Step 8 optional Place the plastic rods into the 4 sides of the frame pieces a hammer is required to insert the 4 plastic rods This step is not required due to the fact that it does not increase the asthetics of the screen Spacing from the wall is already acheived by the parts I and G Step 9 Lift up the screen ATTENTION WHEN LIFTING SCREEN OFF THE FLOOR USE 2 PEOPLE TO HOLD BOTH SIDES OF SCREEN AND GENTLY TILT THE SCREEN UPRIGHT Step 10 i U M5x50 screw ri ii os plastic pipe fix the 8 plastic pipe to the wall screen off the wall Warranty Information in Brief Your EluneVision Product is bac
3. ked by a 30 day 100 satisfaction guar antee If you are any way unsatisfied by this product return it to us for 100 money back including your shipping fee Your EluneVision Product is also backed by a 1 year warranty against manufacturing defects and failure of product under normal operation For detailed warranty information refer to www EluneVision com EluneVision Inc 25 Thornton Trail Dundas Ontario LOH 6X9 www EluneVision com
Download Pdf Manuals
Related Search