STADT ELECTRONIC IGNITION OPERATING INSTRUCTIONS
Contents
1. ISSUED IN THE INTEREST OF PUBLIC SAFETY 5 October 1998 Eff HEATERS READ FIRST Preliminary Check that the wall thermostat is turned off To RESTART your heater Open duct register in all rooms Turn on gas Supply meter and Power point Electronic Ignition Models without Pilot Models P12 P20 P25 P35 EA amp ESS and J60EI J90 El J120 El J150 El EX RT 90 225 incl Turn the gas control valve to the ON position If fitted to your unit 1 Turn the thermostat to the OFF position 2 Turn the 240V AC power on at power point or three phase 3 Turn the thermostat to a setting above room temperature Your Stadt heater should automatically turn on after approx 2 minutes NOTE If the unit fails to light remove the gas control access panel and observe the red indicator light If the light is flashing turn the thermostat OFF and depress the reset button for five seconds The red indicator light will then stop flashing five seconds after the reset is released Follow the lighting procedure to relight the unit If the system still fails to light refer to the Service instructions which are located on the unit or contact on 03 9800 2409 Electronic Ignition Models with Pilot Models J60 J90 J120 J150 J180 J225 S60 S90 S120 S150 S180 S225 EX RT 90 225 incl 1 Turn the gas control valve to the ON position If fitted to your unit 2 Turn the thermostat to the OFF position 3 Turn the 240V AC power on at pow2. er point 4 Turn the thermostat to a setting above room temperature Your Stadt heater should automatically turn on after approx 2 minutes NOTE If the unit fails to light Repeat steps 2 3 and 4 above If the system still fails to light refer to the Service instructions which are located on the unit or contact 03 98002409 SERVICE DIVISION Phone 03 9800 2409 Fax 03 9800 1849
Download Pdf Manuals
Related Search