USER GUIDE GREENFLOC® 120
Contents
1. Application Application area Greenfloc 120 can be used in the drinking water treatment sugar industry food industry paper making other chemical technologies wastewater treatment alone or together with coagulants as coagulant aid It can be mixed with synthetic flocculants too Dosage In drinking water treatment with Al or Fe salts the usual dosage is 0 2 0 6 g m water In food industry and in other technologies the dosage is depending on many parameters the recommended dosage is ranging between 0 1 50 g m3 Application of the flocculant The flocculant liquid is gradually diluted to the required concentration with cold water This solution is dosed to the suspension to be flocculated 5 Handling and storage Concentrated solution 16 7 m m In tightly closed container at 5 C 25 C can be stored for 4 months Diluted solution 0 1 1 m m The solution of the product should not be stored for more than a day In case of longer storage its efficiency decreases and it can be fermented biologically degraded 6 Hazards identification According to the 67 548 EEC Directive the material should be enlisted in the practically non toxic category 7 First aid measures After inhalation fresh air After skin contact wash off water After eye contact rinse out with water 8 Accidental release measures Person related precautionary measures Avoid skin contact and eye contact do not inhale vapors Procedures for2. YD USER GUIDE HYDRA Date of issue 12 08 2004 GREENFLOC 120 1 Identification of the substance preparation and of the company Identification of the product Product name Greenfloc 120 cationic flocculant Manufacturer supplier identification HYDRA 2002 Research Development and Consulting Ltd Address Ovaros ter 14 8200 Veszprem Hungary Phone Fax 36 88 422 104 E mail hydra2002 hydra2002 hu 2 Introduction of the product Greenfloc 120 is an environmentally friendly starch based cationic flocculant Because of its non toxic character its application is very advantageous in drinking water treatment in the food industry or in the biotecnology either alone as flocculant or together with other cationic flocculants Composition information on ingredients Cationic starch ether 16 7 wt CAS No 56780 58 6 Sodium metabisulfite preservative lt 0 5 wt CAS No 7681 57 4 Water to 100 0 wt Physical and chemical properties Form viscous liquid Colour opaque white Odour slight odour pH value pH 7 in 100 g L H20 slurry Melting point not available Boiling point 100 C Ignition temperature not available Flash point not available Explosion limits lower not available upper not available Density 1050 kg m Solubility in water completely soluble in water Thermal decomposition 200 C 3 Authorization Approved flocculant for drinking water treatment OTH 2653 2004 1 2 USER GUIDE GREENFLOC 120 4
3. cleaning absorption Clean up affected area Wet floor may be slippery when material is present 2 2
Download Pdf Manuals
Related Search