iGAUGE OPERATING INSTRUCTIONS
Contents
1. om Y mi VA CM IGAUGE OPERATING INSTRUCTIONS The iGAUGE is an accessory for the 1CHARGE Model 6 which enables the user to charge the battery and or to measure the capacity of a two way radio battery Basic 1Gauge functions 1 Charge a Battery This will initiate a normal charge cycle only No capacity measurement 2 Capacity Cycle Discharge a battery then recharge it displaying the battery s discharge capacity in milliamp hours mAH 3 ReActivate Cycle Discharge Charges a battery three times displaying the 3 discharge capacities in mAH Gauge functions may be selected as follows 1 Mount a battery on the charger position containing the iGAUGE monitor NOTE Prior to mounting a battery a language may be selected by pressing NEXT until the desired language is reached then pressing SELECT 2 Observe the display announcing Charging in 29 28 27 ect seconds The display is counting down the time until it will commence a normal charge cycle if no selection is made NOTE The selection must be made before the count reaches zero after which the normal charge cycle is started If a selection is not made in time simply remove the battery then replace it and the process will commence again 3 During the countdown press the NEXT button until you reach your selection 4 When your selection Capacity or ReActivate appears in the display window press the SELECT button The measurement process y2. ou select will begin automatically and the display will show Discharging if you select Capacity or Discharging 1 if ReActivate was selected For additional information please contact Advanced Charger Technology Inc 5500 McDonough Drive Bldg Ste 130 Norcross GA 30093 770 263 6337 www actcharge com
Download Pdf Manuals
Related Search