User's Manual 3.6kWh All in One SAMSUNG SDI
Contents
1. System Efficiency Curve solar gt grid 100 0 95 0 4 gt 900 Vmpp 395V poly 250wp EU n 95 36 E E 85 0 Vmpp 370V mono 270wp EU n 94 21 80 0 75 0 T T T 5 10 20 30 50 100 Load 4 6kW Power efficiency curve 2 2 Safety Guidelines DANGER High voltages in power conditioning circuits Lethal hazards resulting in electric shock and burns The following work on the inverter must be carried out by qualified personnel only Electrical insulation Repairs Modification 13 ENG Version 140818 Except when under supervision by qualified personnel children or people lacking physical mental or intelligence capability should not work on this system The system should be installed out of the reach of children Even when no external voltage is applied to the system it may have internal high voltage in the device High voltage can cause lethal damage to the human body CAUTION Photovoltaic array supplies DC voltage to the 3 6kWh All in One system Do not touch PV cable when PV cable is connected to PV arrays CAUTION Li Ion battery ESS energy storage system inside When assembling the system do not intentionally make a short condition between the positive and negative terminals of the ESS with a metallic object All work on the ESS and electrical connections must be carried out by qualified personnel only ESS inside 3 6kWh All in One provides a safe sourc2. During Battery Discharge operation Battery Discharge operation is terminated through the protection function PROTEC E207 NORMAL INV DC Wait until the event message disappears TION LINK EVENT After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated NORMAL BATT V through the protection function PROTEC Wait until the event message disappears TION SEUR EDELE De After the event message is removed it is DC LINK EVENT automatically restored to normal If it is not removed until the time limit it is converted to significant event 7 2 4 PV General Events Protection During PV generation mode operation the PV generation mode operation is terminated through the protection function PROTEC E301 ON SEQUENCE Wait until the event message disappears TION GRID OFF After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During PV generation mode operation the PV generation mode operation is ON SEQUENCE terminated through the protection function PROTEC Wait until the event message disappears E302 INV DC LINK ee TION After the event message is removed it is EVENT l automatically restored to normal If it is not removed until the time limit it is
3. Range 43 67V DC 33 3A DC 46 5A Battery Voltage nominal or range Battery Voltage nominal or range Battery Current nominal continuous Battery Current max continuous Other quantities Protective class I IL ILI Class I Ingress protection IP rating per part 1 IP21 AC connection 1 phase Operating temperature 10 40 C 20 60 C Over voltage category III Storage temperature ENG Version 140818 Battery Max current Unit Max input total power 66 KW kWp Vdc Vdc A EA EA U Grid connection data nit Nominal output power W Max nominal output power V Max output current A Max allowed fuse protection A 5 Harmonic distortion of output current at THD lt 2 Pac gt 0 5 Pacnom Nominal AC voltage range 230 184 264 AC grid frequency 50 Over voltage category phase Operating temperature 10 40 u x Max number strings 11 ENG Version 140818 I S Output Power kW x Lu Z 1 00 0 00 20 30 AD 50 60 70 Ambient temperature C Derating Curve System Efficiency Curve poly 250wp mono 270wp System Efficiency Battery SOC 60 solar battery grid 86 0096 84 0096 82 0096 80 0096 78 0096 76 0096 74 0096 72 0096 1000W 1500W Vmpp 395V poly 250wp Vmpp 370V mono 270wp Power efficiency curve 12 ENG Version 140818 Efficiency Curve of PV module poly 250wp mono 270wp
4. 9 Contact For technical problems or inquiries for usage please contact the installation company To receive customer support the following information is required Product type Serial Number Connected PV module type and number Option equipment Address 85737 Oskar Messter Str 29 Ismaning Muenchen Germany E Mail esseuservice samsung com 46 ENG Version 140818 10 I I 1 2 l 2 e Appendix Samsung SDI Limited Warranty Product Name 3 6kwh All in One Product Warranty 1 Samsung SDI warrants that the Product will be free from defects in material and workmanship under normal use in accordance with the applicable Technical Specifications for the Product 2 The warranty period of the Product Product Warranty Period is specified as follows A PCS The warranty period shall be five 5 years from the Date of Installation B Battery amp Enclosure The warranty period shall be two 2 years from the Date of Installation 3 In the event that the Product should fail to conform to the Technical Specifications during the Product Warranty Period Samsung SDI shall at Samsung SDs option i repair the non conforming or defective Product or ii provide Buyer with a replacement for the Product Samsung SDI shall be responsible for all reasonable costs of repair or replacement in connection with such non conforming or defective Product provided that Buyer shall bear the costs of removing the defe
5. E E E 287 S AM LAN G0 Le P m UU TT 287 o HOODIE e ER ee N 298 ME Ee 298 WE iiibers E 298 Ded AMIEBODEESBID EE 208 RE 298 202 2 Password IT TA li zal TOIT sees ve ken wes ee y n eyde Ee ae K ere ee Sele N 309 2 Oo Ee 309 Io Mobile sal GEE ss Ee yyy RI Ee Re ER ee Re Ee 31 D Mant nano dnd ET EN 32 or id So ei EA nuu RR EE EN 32 ME EE EE ER N ON HE n n i DD r _m m_dmd dmdmdmcr r ll a 22 56 21 ENEE 33 D Checkin The EE E 33 2 ENG Version 140818 0 4 Checking the eege ee eege eege 33 7 Messan Descrip ON EEN 34 74 Messages n Norma ODETUACIOT EE 34 7 2 GeneraL EVEN EE 34 7 2 1 PCS General Events Warnings Ek kek kek kk 34 T22 PCS General Events Protection EE 365 72 Battery Discharee General E Vents see REM aia 387 7 2 4 PV General Events Protection e ios yaya aly ize ED ee ee Sus be Ge GO 398 7 2 5 ETC General Events Protection eise sees ew al beyt emen 409 TPO BMS General Events os eb ES eels se KU okie Maes EM E E t 4 7 2 7 EMS Communication vente 41 1 2 8 So mo l Fault EE 41 Dade SNCI EVO IES ch cence tert ae bac kare basta inet ___ n 443 5 PAGANS CMC EE Vt EE tus PD shee eet ee 454 D SONNE ie RET STU TT 465 TE UI 0 0 ub RR Rr 476 3 ENG Version 140818 1 Information in this Manual 1 1 About this Manual This is the user s manual for the Samsung 3 6kWh All in One Users of this device must refer to the user s manua
6. Product in issue at the time the related warranty claim is accepted by Samsung SDI Samsung SDI may at its sole option replace it with a different type of Product of mutually agreed size color shape and or power or refund the purchase price prorated by the days of the relevant Warranty Period remaining V Contact Address 85737 Oskar Messter Str 29 Ismaning Muenchen Germany E Mail esseuservice samsung com 49 ENG Version 140818 11 Appendix Signing up for a membership Product Name 3 6kwh All in One A Open the browser on an internet connected device such as PC notebook or smartphone D Enter https myess samsungsdi com in the address field of the browser C When you connect to the website successfully the screen shown in Figure A will appear ET Ch 2215 aman C A VA N div M Login SAMSUNG SD amp 55 Mortioring Syst Privacy Poker Moacay Anges b 2004 14 44 d Eraphst Figure A Connecting to the website Press the New Account button to register as a new member First time users of the service must sign up for membership Enter the required information and additional information to sign up for membership G mm Lastly agree to the service subscription terms and conditions and then press the Submit button PC O ma aa Figure B Entering the information to sign up for a membership N Caution e Items marked with are required e Family i
7. 2 Installation Application Suitable for Safety This device Samsung RES 3 6kWh All in One is designed to be suitable for household purposes The PV Input terminal is composed of two Strings and one PV String input must install 3 3kW or less PV panel capacity Also the maximum input voltage of the PV String must be limited to 550V or less Two independent channels of the PV Input exist in the 3 6kWh All in One as shown in the figure below PV1 PV1 PV2 PV2 They are used independently for running the maximum power from the sources PV1 and PV2 For the two PV Inputs independent use of two channels is recommended The parallel connection of one PV string into two independent PV inputs PV1 PV2 should be avoided Refer to 3 6kWh All in One Solar energy input connection in the Figure below PV common mode is not allowed 8 ENG Version 140818 j W ll lut 6 E li om my mm 3 6kWh All in One Solar energy input connection For 3 6kWh All in One and Public Grid connection the watt hour meter refer to the installation manual recommended by Samsung SDI must be installed first and between the Grid watt hour meter and the 3 6kWh All in One distribution box must be installed For the distribution box the equipment recommended by the installation company must be used For installation it must be installed in a location complying with the P21 Installation in a location that does not comply wi
8. BATT V amp BATT I amp BDC DC link event lt Indication screen 17 event occurrence Temp protection 24 ENG Version 140818 lt Indication screen_21 event occurrence SPI communication event gt 25 ENG Version 140818 Indication screen 22 event occurrence Single fault event Indication screen 23 event occurrence Continuously 3 times PCS fault 4 1 8 Application Download Mode lt Indication screen on Application Download Mode gt 4 2 Starting the System 1 After completing the installation turn on the AC circuit breaker and DC disconnect switch installed in the distribution box distribution board see the section 5 7 in the installation guide 2 Check the system check message on the front LCD screen 26 ENG Version 140818 lt Initial indication screen on power on 3 After the system check check the system PV and the battery state Standby state indication screen before the EMS command 4 Receive the command from the EMS to convert to operation mode For each operation mode screen refer to 4 1 1 4 1 6 5 On the occurrence of event message refer to 4 1 7 and 7 2 4 3 System Turn off Method To turn off the system push down the manual AC circuit breaker and DC disconnect switch in the distribution board panel board 27 ENG Version 140818 5 Communication 5 1 Overview This is a description of the Internet connection for system monitoring When t
9. Occurs when the Fan operation is abnormal This is the overall Fan warning message with no special change in the sequence The warning message disappears when converted to the normal state FAN WARNING Occurs when the battery connection is abnormal This is the connection warning message with no special change in the sequence The warning message disappears when converted to the normal state BATT CONNECTION WARNING 7 2 2 PCS General Events Protection The operation mode is terminated in most significant PROTECTION GRID RMS OVER Wait until the event message disappears E101 CURRENT After the event message is removed it is PROTECTION automatically restored to normal PROTEC If it is not removed until the time limit it is TION converted to significant event The operation mode is terminated in most DC LINK OVER significant PROTECTION E102 VOLTAGE Wait until the event message disappears PROTECTION After the event message is removed it is automatically restored to normal 36 ENG Version 140818 37 PV STRINGI REVERSE CONNECTION PROTECTION PV STRING REVERSE E104 CONNECTION PROTECTION PV STRINGI E105 OVER VOLTAGE PROTECTION PV STRINGI E106 OVER CURRENT PROTECTION PV STRING2 E107 OVER VOLTAGE PROTECTION E103 PV STRING2 E108 OVER CURRENT PROTECTION BATT OVER E109 VOLTAGE PROTECTION ENG Version 140818 If it is not removed until the time limit it is converted to s
10. air may damage the fan In cleaning the fan do not use compressed air because it may damage the fan After cleaning insert the side cover Insert the side cover and use 1 3 1 6Nm torque to tighten and fix the screw 6 3 Checking the Event Logs Checking the event messages on the website https myess samsungsdi com check the cause of the event message described in the following chapter to perform the correct measure refer to Chapter 7 Among the event messages for the significant messages contact the designated installer or the maintenance company for A S 6 4 Checking the Terminals 1 Warning High voltages during operation can cause lethal damage to the human body if the terminals are touched Please disconnect the product from the voltage sources PV AC grids Ensure PV connection cables on the PV1 PV1 and PV2 PV2 are fastened Check for corrosion on the terminals If corrosion 1s seen please contact the installer Ensure AC cables in AC1 and AC2 are fastened 34 ENG Version 140818 7 Message Description 7 1 Messages in Normal Operation message Warning and fault state When this icon is marked check the event list DIR RN Indicating the integrating power value of each mode 7 2 General Events The general event is composed of warning and protection The warning level event does not affect the change in the product mode and is automatically restored when solving the problem In this case problem solving
11. status which is not categorized as a mode 4 1 1 PV Auto Mode 1 Solar energy generation is possible and battery charge discharge is possible 2 The solar energy generation power is charged or discharged to the battery through the EMS decision 3 Maximum 4 6kW or less can be sent to the LOAD and the system lt Indication screen 1 Solar energy generation Large battery charge home use sell remaining amount 17 ENG Version 140818 lt Indication screen 2 Solar energy generation small battery discharge Home use buy shortage amount gt lt Indication screen_3 Solar energy generation Battery standby Home use sell remaining amount gt 4 1 2 PV Only Mode 1 This is the state enabled for solar energy generation However the battery charge discharge does not operate 2 Maximum 4 6kW or less of solar energy generation power can be sent to the LOAD and the system through the EMS decision lt Indication screen 2 Solar energy generation Buy shortage amount 18 ENG Version 140818 4 1 3 Battery Discharge Mode 1 This is the state of having no solar energy generation Only battery discharge is possible 2 By the EMS decision the battery discharge power can be sent a maximum of 2kW or less only to the LOAD lt Indication screen_1 Battery discharge Home use gt lt Indication screen_2 Battery discharge Home use Buy shortage amount gt 4 1 4 Standby Mode 1 This is the standby stat
12. value Occurs when the imbalance of the Cell PROTEC CELL VOLTAGE voltage is above limit value TION E510 IMBALANCE Restored to normal state when the PROTECTION imbalance of the Cell voltage is below limit value AFE initialization failure E511 AFE INITIALIZATION Restored to normal mode on AFE initialization success mon E512 AFE INITIALIZATION AFE communication failure WARNIN E513 CELL TEMP SENSOR Occurs above the standard level of G IEA Battery cell temp PROTEC E514 CELL TEMP SENSOR Occurs above the standard level of TION 2EA Battery cell temp Fas 2 1 LINE Xi Events B bied Fu CAN EVENT Turn off and restart the system Reconnect the communication line between the EMS board and the DSP board WARNING E602 ETHERNET EVENT Disconnect and reconnect the LAN Turn off and restart the router Make sure that the DHCP server function of router 1s activated Turn off and restart the system WARNING E603 SMART METER Make sure that the Meter device is p BVENT properly selected Disconnect and reconnect the DO cable Turn off and restart the system sc 2 8 LB Fault Events NK GRID UNDER The operation mode is terminated when VELLE PAULI power system event occurs Restart 1 minute after electric power system event 42 ENG Version 140818 TT Tom MN GRID OVER VOLTAGE The operation mode is terminated when FAULI power system event occurs Restart 1 minute after electric power system event settled GR
13. ID UNDER The operation mode is terminated when FREQUENCY PAULI power system event occurs Restart 1 minute after electric power system event settled GRID OVER The operation mode is terminated when FREOVENGY FAULI power system event occurs Restart 1 minute after electric power system event settled GRID TEN MINUTE The operation mode is terminated when ie ES power system event occurs Restart 1 minute after electric power system event settled RCMU FAULT Turn off system power when the level of leakage current is over standard level Check leakage current level then restart or turn off for the level below standard and problem respectively PV INSULATION OFF Turn off system power if PV SE INSULATION RESISTANCE is of standard level Restart after 3 minutes ANTI ISLANDING In case of electric power system black FAULL Out it automatically detects the state and turns off All in One Restart after 3 minutes FUNCTIONAL Occur in case of mismatching between SAFETY FAULI the two MCU measuring values Restart after 3 minutes if no problem found 43 ENG Version 140818 7 3 Significant Events In Significant events the system is basically turned off installer must be contacted and the problem must be solved by the installer s measures to restore the system to normal operation Checking event codes are available in the website https myess samsungsdi com If internet is not available customers can check the only fatal event codes SPI Oc
14. SCLAIMED BY SAMSUNG SDI TO THE EXTENT AN IMPLIED WARRANTY CANNOT BE EXCLUDED SUCH WARRANTY IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD THIS DISCLAIMER AND EXCLUSION SHALL APPLY EVEN IF IHE EXPRESS WARRANTY SET FORTH ABOVE FAILS OF IIS ESSENTIAL PURPOSE IN NO EVENT WILL SAMSUNG SDI BE LIABLE FOR ANY COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES OR FOR ANY CONSEQUENTIAL SPECIAL INCIDENTAL INDIRECT OR PUNITIVE DAMAGES INCLUDING WITHOUT LIMITATION LOST PROFITS WHETHER THE CLAIM IS BASED ON CONTRACT TORT STRICT LIABILITY OR ANY OTHER THEORY OF LAW OR EQUITY EVEN IF ENG Version 140818 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SAMSUNG SDI S LIABILITY FROM ANY CAUSE WHATSOEVER SHALL IN NO EVENT EXCEED THE AMOUNT OF THE PURCHASE PRICE PAID BY BUYER TO SAMSUNG SDI FOR SUCH PRODUCT GIVING RISE TO THE LIABILITY IV Obtaining of Warranty Service A The warranty provided hereunder is only applicable to the Buyer who has purchased Products directly from Samsung SDI or from the subsidiaries of Samsung SDI B The return of any Products will not be accepted unless prior written authorization has been given by Samsung SDI The written authorization should contain the Product s model name a description of the defect and or failure and the serial number located on the Products label attached to the backside of the Products and the Date of Installation C In the event Samsung SDI has discontinued the manufacture of the
15. User s Manual 3 6kWh All in One SAMSUNG SDI 1 ENG Version 140818 Table of Contents HEN 1 Oh in this Mantal RE OE OR N EE p M MJAJNJMJJNMNMM A t1 JOTI TS ATU ME N RE EE N A MD SS ei OE EO EE AE RUNE A ko ENEE ee 4 2b Symbols DISC _l _rrm r re gn 4 WAZ EE EE EE TE E ate chai 7 AR EN ba Nee U OE ER N EE OR EE EE 7 2 1 1 ddentits ie the Product ss ss si SE Ee dn Ged ED ED dir 7 2 1 2 Installation Application Suitable for Safety esse see ee ee ee ee 8 241 5 Technical Spe ili atiOns os N EE yina ee xmas Des eve Ge ee GE 9 AE is iS ie EU UU EE Tm 13 2 95 35 VEDOLIOSCHDIOD EE 15 2 92L PGS ee e esci uaspia bl rz ERMOIZDITSDSDTDTIMIIMIE E 15 PROC CE C VERE ree mias didi aD M MINUM TERI E SM ee NO N N 16 LE cud Di as Ee IE Re ER RE DE EO ee ee oe Ge 17 4 1 Operation Mode Description keke kek ke keke k kek k k kk 17 did PYANO TEE 17 kka PYON MIIO ER OE EE kab n uk eb be eben EE OE 18 id BSHeb DS CMA O Mode nn yen ER EO N kel E ka IM Hen RUE Me GE ie UH 19 41 3 E ele Dle ER ER DM 19 4 1 5 Forced Charged Mode A S mode sis eie ge kek ka 19 Al 6 Did dee Mode EE i ene EE EE Ma EE Ee DUE 20 4 1 7 Eyent ET TE DC 20 4 3 JApblicat ion Download ee 25 d Iaceo the oe en AR AE OE EE Gea diui EE 25 4 3 System Totn oli Metode iss test he en k n Me BR Se is ei Ee 26 SM Go Tm 287 Eu zcr rrr r r r br a M 287 2 2 Components and AN ESE ELON E 287 SNAM Sent OOMS
16. alized password is sent to the registered e mail address Request Forgotten Password ig Forgot Your Password Password initialization 5 3 6 How to Use the Service After completing log in normal service use is possible This service currently provides menus of monitoring consumption report ESS report ESS forecast and notice Enabled to modify after further update 5 3 6 1 Monitoring The operation status of the current product is indicated The operation status of the product or the customer power usage information generation amount information can be checked in real time Furthermore event codes which occurred during operation can be checked on the monitoring page Details of the event codes can be checked by clicking the exclamation marks which are popped up on the ESS icon If internet is not available customers cannot check the event codes 30 ENG Version 140818 a r troubleshooting due to Di bod E L4 Demand ESS BO 1 2kW 1 2kW at 0 12 kWh Samsung SDI Energy Storage System Per EE Friday May 16th 2014 13 00 Contact Us English Monitoring page 5 3 6 2 Consumption Report The household power usage information collected during smart meter linkage is provided Especially information such as household type size and inhabiting manpower collected according to the customer approval are used to provide various types of statistics and comparative analysis data Consumption Repor
17. converted to significant event 39 ENG Version 140818 If it is not removed until the time limit it is converted to significant event During PV generation mode operation the PV generation mode operation is terminated through the protection function PROTEC NORMAL GRID Wait until the event message disappears TION OFF After the event message is removed it is automatically restored to normal During PV generation mode operation the PV generation mode operation is terminated through the protection function PROTEC ON SEQUENCE PV Wait until the event message disappears TION V EVENT After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During PV generation mode operation the PV generation mode operation is NORMAL INV DC terminated through the protection function PROTEC Wait until the event message disappears LINK amp PV I se TION EVENT After the event message is removed it is automatically restored to normal If it is not removed until the time limit it 1s converted to significant event During PV generation mode operation the PV generation mode operation is terminated through the protection function PROTEC NORMAL PV V Wait until the event message disappears TION EVENT After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is c
18. ctive Product s and re installation of the repaired or replaced Product Performance Guarantee In addition to the Product Warranty Samsung SDI guarantees performance of the Product to be maintained at least sixty five percent 65 of initial battery s capacity provided that the usage of the Product shall have complied with the Operating Conditions under specification for a period of ten 10 years after the Installation Date whichever occurs earlier Performance Guarantee Period Also Samsung SDI guarantees cycle life of 6 000cycles at room temperature 25C About Self Discharging Degradation Samsung SDI guarantees 180days after Product means the battery pack of Samsung SDI that consists of Battery PCS and the Enclosure Date of Installation To claim any warranty hereunder Buyer must provide the date of installation If Buyer is unable to submit any proof of the Date of Installation Samsung SDI will calculate the Product Warranty Period from the manufacturing date which is written on the Product s label Buyer means any individual or entity that directly purchases the Product from Samsung SDI 47 ENG Version 140818 ex work III Limitation of Warranty 48 L The warranties set forth hereunder shall not apply to Products which in Samsung SDI s absolute judgment have been subjected to misuse abuse neglect or accident alteration improper installation application or removal including but not l
19. curs on internal non communication E901 COMMUNICATIO between the PCS N EVENT Contact the installer immediately Occurs on non communication with the CAN EMS E902 COMMUNICATIO All in One System is operation converted to N EVENT Stand Alone mode Contact the installer immediately Fi SINGLE FAULT Occurs on system connection standard E903 single fault over EVENT l l Sin cani Contact the installer immediately When PCS FAULT is occurred three CONTINUOUSLY 3 consecutive times PCS HARD FAIL is TIMES PCS FAULT judged to be occurred to stop the operation Contact the installer immediately PV CROSS Occurs when the PV GND is cross E905 CONNECTION connected Permanent Fail Contact the installer immediately Permanent Fail Contact the installer immediately Permanent Fail Contact the installer immediately 44 ENG Version 140818 8 Arrangement of Terms Chapter 1 Residential Energy Storage Chapter 2 Distribution Box A box containing AC DC ON OFF switches for electricity distribution Chapter 3 PCS Power conversion system which contains inverters and converters Tray BMS Tray battery management system Energy management system Chapter 4 Electricity grid which connects to power system Chapter 7 state of Charge battery charging state PV String Describes series connected photovoltaic modules Serial port interface Controller Area Network CELL Battery individual cell 45 ENG Version 140818
20. e before converting to the operation mode PV Auto PV Only Battery discharge mode 2 Conversion to the operation mode PV Auto PV Only Battery discharge mode is made by the EMS decision lt Indication screen on Standby Mode gt 4 1 5 Forced Charged Mode A S mode 1 This is the forced charge mode of the battery in system check Solar energy generation is not used This is the state where the power continuously flows from the electric power system to the battery 19 ENG Version 140818 lt Indication screen on Forced charged Mode gt 4 1 6 Stand Alone Mode When the All in One is disconnected from the smart meter or the power conversion system is disconnected from the EMS energy management system the All in One system enters into the Stand Alone Mode The system operates in a PV only mode lt Indication screen on stand alone mode gt 4 1 7 Event Checking Status This is the mode of stopping and standby generation on event occurrence lt Indication screen_1 event occurrence Grid RMS over current protection gt 20 ENG Version 140818 lt Indication screen 5 event occurrence PV string over voltage protection 21 ENG Version 140818 lt Indication screen 9 event occurrence BATT over voltage protection 22 ENG Version 140818 lt Indication screen 13 event occurrence Normal INV DC link event gt 23 ENG Version 140818 Indication screen 14 event occurrence Normal
21. e of electrical energy when operated as intended and as designed Potentially hazardous circumstances such as excessive heat or electrolyte mist may occur under improper operating conditions damage misuse and or abuse The following safety precautions and the warning messages described in this section must be observed If any of the following precautions are not fully understood or if you have any questions contact Customer Support for guidance The Safety Section may not include all regulations for your locale personnel working with 3 6kWh All in One must review applicable federal state and local regulations as well as the industry standards regarding this product CAUTION When transporting the All in One system with packaged type remove the battery tray from the All in One system and transport it separately 14 ENG Version 140818 NOTICE 1 Over voltages in the power conditioning circuits Destruction of the All in One system means voiding of warranty claims 2 Danger to life from electric shock due to damaged 3 6kWh All in One Operating a damaged 3 6kWh All in One can lead to hazardous situations that may result in death or serious injuries due to electrical shock Only operate the 3 6kWh All in One when it is technically faultless and in an operationally safe stat Regularly check the All in One system for visible damage Make sure that all safety equipment is freely accessible at all times If the 3 6kWh All in One is da
22. he Internet and specific services can collect additional information only through approval from the customer 5 3 2 Membership To use the service you must register the membership through the homepage During membership registration the membere information such as ID password name and the address are collected and additional data can also collected for providing various statistical analysis information with the customer s approval User new account is refer to Appendix Signing up for a membership 5 3 3 Membership Withdrawal For a customer who does not want to use the service membership withdrawal is possible through the personal information modification menu on the homepage 5 3 4 Log in Log in to the homepage through the ID and the password generated through membership registration If you are not logged in normal service use is not possible Also if the log in ID error or the password error occurs 5 consecutive times the access is blocked for 10 minutes for security and permitted of access afterwards therefore please take caution Log in page 29 ENG Version 140818 5 3 5 Password Initialization For the customer who forgets their password during use the password initialization menu can be used in the homepage to initialize the password In the log in page select the Forgot your id or password menu and when the customer confirm the ID and the e mail address filled in during the membership registration the initi
23. he Internet connection is properly completed the system operation status can be monitored through the computer 5 2 Components and LAN Connection This is a description of the components for connecting the system to the Internet 5 2 1 Essential Components 5 2 1 1 Internet service line 5 2 1 2 Wired router 5 2 1 3 RJ45 LAN connection cable 5 2 2 LAN Connection 5 2 2 1 LAN terminal SR DO Bi Fesd ln TT C2 A el we le s MICOI Semer D Perchase EW MEGAT KEN WC E 21 ea PA LO LED 5 2 2 2 Check Internet connection status Check by looking at the LED lighting status 5 2 2 2 Function per LED Upper LED Turns on automatically on connecting the Internet line Connection Lower LED Blinks when there is data Rx Tx 5 2 2 2 2 LED status on normal connection Upper LED is On lower LED is blinking 5 2 2 2 3 LED status on abnormal connection Upper and lower LED all maintaining Off state 5 2 2 3 On abnormal connection 5 2 2 3 1 Connect the LAN cable again and check the LED status 28 ENG Version 140818 5 2 2 3 2 Check whether the router is Off 5 2 2 3 3 Contact the installation company for maintenance 5 3 Homepage The customer purchasing this device can use the web browser https myess samsungsdi com or the smart phone to check operation status and various operation statistical information in the house or remotely 5 3 1 Service Terms This service is provided only when the device is connected to t
24. ignificant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the e
25. imited to any installation application repair service or removal by any party not authorized in writing by Samsung SDI non observance of Samsung SDIs installation users and or maintenance instructions repair or modifications by someone other than an approved service technician of Samsung SDI power failure surges lightning flood fire accidental breakage or other events outside Samsung SDI s control Further no warranty shall apply to any damage caused by goods to which Samsung SDI s Products are incorporated or installed into or used together with including any parts thereof Buyer shall promptly but in any event within five 5 days after obtaining notice or knowledge thereof notify Samsung SDI of any defect or other nonconformity with any of equipment warranties identified by Buyer by delivering written notice to Samsung SDI of a warranty claim Samsung SDI shall promptly notify Buyer of any defect or other nonconformity with any of the equipment warranties identified by Samsung SDI EXCEPI AS SPECIFIED ABOVE ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE NON INFRINGEMENT SATISFACTORY QUALITY NON INTERFERENCE ACCURACY OF INFORMATIONAL CONTENT OR ARISING FROM A COURSE OF DEALING LAW USAGE OR TRADE PRACTICE ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW AND ARE EXPRESSLY DI
26. is enabled according to the change in the time and operation status condition On protection level event occurrence the system stops and is automatically restored when solving the problem In this case problem solving is enabled according to the change in the time and operation status condition Checking event codes are available in the website https myess samsungsdi com If internet is not available customers can check the only fatal event codes 7 2 1 PCS General Events Warnings Occurs below the standard level of system voltage MUS NUN E001 OR UNDER This is the overall voltage current warning G VOLTAGE message with no special change in the sequence 35 ENG Version 140818 Jeer o converted to the normal state Occurs above the standard level of system voltage GRID OVER This is the overall voltage current warning VOLTAGE message with no special change in the sequence The warning message disappears when converted to the normal state Occurs below the standard level of battery energy voltage BATT UNDER This is the overall voltage current warning VOLTAGE message with no special change in the sequence The warning message disappears when converted to the normal state Occurs above the standard level of battery energy voltage BATT OVER This is the overall voltage current warning VOLTAGE message with no special change in the sequence The warning message disappears when converted to the normal state
27. l installation manual and the application note 1 2 Target Group This user s manual applies only to the 3 6kWh All in One 1 3 Additional Information The user s manual and installation manual can be downloaded from the product download section at https myess samsungsdi com Specification of the product can be change without any notice to customers for the system improvement And software can be update without any notice to customers via internet 1 4 Symbols Used CAUTION CAUTION represents hazardous situations which can cause light injuries if not avoided INFORMATION provides tips that are valuable for optimum installation and operation of the product Beware dangerous voltage The inverter operates at high voltage All works related to the inverter can only be performed by an electrical technician 4 ENG Version 140818 Beware hot surface The inverter can get hot during operation Avoid contact in Operation Follow the guidelines of all relevant documents enclosed with the inverter Do not dispose of the inverter with household wastes For detailed disposal information please refer to the installation manual provided CE indication The relevant equipment complies with the requirements in the EC guidelines Symbol Direct current 4 Three phase alternating current Three phase alternating current with neutral conductor Protective conductor terminal Symbol m Refer to the operating instruction
28. maged do not touch Please immediately contact the installer or Samsung SDI 3 Please contact SDI or installer if an LCD screen shows significant event messages Please contact installer whenever the All in One system reports an event Refer to the event message table for different significant general events 2 3 Symbol description 2 3 PCS Symbols Inverter dc dc converter 15 ENG Version 140818 3 Product Overvlew This device is an 3 6kWh All in One System including the PV inverter battery charger discharger Lithium Ion battery and EMS and compared to existing products installation is simple and is an optimized solution to increase self consumption rate at low cost The basic operation modes consist of PV generation mode PV generation charge discharge mode and battery discharge mode and the type of operation mode is determined by the EMS command 16 ENG Version 140818 4 Operating Modes The status of this system can be identified in real time through the indication screen LCD screen shown in the Figure below The status indication screen can indicate numbers up to 4 digits and the icons are defined for each state Details are described in subsections Front status indication screen 4 Operation Mode Description This system is composed of 6 modes PV Auto PV Only Battery discharge Standby A S forced charge and Stand alone mode Otherwise there exists event check
29. nformation is optional If you agree to provide this additional information you can receive a variety of analysis information e If you do not wish to provide additional information later you can cancel it from the setting page 50 ENG Version 140818
30. onverted to significant event ETC sencia Events EN GERD AE bg when the switch temperature is high PROTEC Wait until the event message disappears E401 TEMP Protection After the event message is removed it is TION automatically restored to normal If it is not removed until the time limit it is converted to significant event Occurs on PCS hardware protection Wait until the event message disappears PROTEC E402 OVER CURRENT After the event message is removed it is TION TRIPZONE automatically restored to normal If it is not removed until the time limit it is converted to significant event 40 ENG Version 140818 PROTEC TION EA03 TEMP SENSOR Occurs when the Temp sensor connection is abnormal Wait until the event message disappears After the event message is removed it is automatically restored to normal Occurs when the PV common states is abnormal Wait until the event message disappears After the event message is removed it is PROTEC TION E404 PV COMMON 7 WARNIN G PROTEC TION WARNIN G PROTEC TION WARNIN G PROTEC TION WARNIN G 4 BMS General Events 6 OVER VOLTAGE PROTECTION CELL OVER VOLTAGE PROTECTION CELL UNDER VOLTAGE PROTECTION CELL UNDER VOLTAGE PROTECTION CELL OVER TEMP PROTECTION CELL OVER TEMP PROTECTION CELL UNDER TEMP PROTECTION CELL ENG Version 140818 automatically restored to normal Occurs when the Max cell voltage i
31. ot disassemble during operation for cleaning High voltage can cause lethal damage to the human body Please make sure the AC and DC switch relay in the distribution box is disconnected before disassembling the system 6 1 Fan Exchange Change the fan according to the following procedures 1 Turn off the AC circuit breaker and the DC disconnect switch 2 Separate the side cover Do not separate the front cover 3 Separate the fan connector 4 Separate the fan d K H bumm 5 Change the fan 6 After changing the fan follow stages 1 to 4 in reverse order to install the new fan Use 1 3 1 6N m torque to tighten and fix the screw 7 Check the fan state 8 After changing the fan perform a test operation to check whether there is a fan event message 6 2 Cleaning Cleaning should be done periodically The 3 6kWh All in One system is recommended to be cleaned every four months If the enclosure is in a dirty condition please use a soft brush or a vacuum to remove the dirt 33 ENG Version 140818 Do not use liquids such as solvents abrasives or corrosive liquids in the enclosures 6 2 1 Side Cover Cleaning Clean the side cover according to the follow procedures 1 Turn off the DC disconnect switch and AC circuit breaker on the panel board and separate the MC connector Separate the side cover Do not separate the front cover CEU ME Notice Use of compressed
32. s 5 ENG Version 140818 Both direct and alternating current Equipment protected throughout by double insulation or reinforced insulation A Caution risk of electric shock Number Symbol Caution risk of danger In position of a bi stable push control to Out position of a bi stable push control O Input terminal or rating naa Bidirectional terminal rating Caution risk of electric shock Energy storage timed discharge Caution risk of hearing damage Wear hearing protection 6 ENG Version 140818 2 Safety 2 1 Intended Usage The original usage purpose of this device is for household single phase system link solar energy generation and Li Ion Battery charge and discharge The basic operations are as follows samsung 3 6kWh All in One uses solar energy power connected to the input output terminal installed on the side of the device to charge the Li Ion Battery installed inside and converts the direct current electricity of the battery to alternating current to discharge as household single phase load or electric system or uses the electric system of electric energy to charge the battery It is recommended not to use this device for other than the purpose described in this manual The substitute use of this device random change and use of components other than sold or recommended by Samsung SDI will nullify the product guarantee For inquiries about the proper use of this device please contact the Samsung SDI Ser
33. s above Warning level Automatically restored to normal state when the Max cell voltage comes below the limit value System stops when the Max Cell voltage is above Protection level Automatically restored to normal state when the Max Cell voltage comes below the limit value Occurs when the Min cell voltage is below Protection level Automatically restored to normal state when the Min Cell voltage goes above the limit value System stops when the Min cell voltage is below Protection level Automatically restored to normal state when the Min Cell voltage goes above the limit value Occurs when the Max Cell temperature is above Protection level Automatically restored to normal state when the Max Cell temperature comes below the limit value System stops when the Max Cell temperature is above Protection level Automatically restored to normal state when the Max Cell temperature comes below the limit value Occurs when the Min cell temperature is below Protection level Automatically restored to normal state when the Min Cell temperature goes above the limit value System stops when the Min cell PROTEC vun UNDER TEMP IT blow Protect level TION PROTECTION CELL when the Min Cell temperature goes above the limit value Occurs when the imbalance of the Cell WARNIN CELL VOLTAGE voltage is above limit value G E509 IMBALANCE Restored to normal state when the PROTECTION imbalance of the Cell voltage is below limit
34. t May Consumption Overview March April May 210kWh 212kWh 210kWh i i 25 2 Position MORE j My Position gp Average Consumption D 23 350kWh mmu FX 7 GOOD TIE he 42 0 Consumption report page 5 3 6 3 ESS Report In the ESS Report page various types of data generated through ESS operation can be checked The amount of energy charged or discharged can be checked through the ESS and other data comparison with solar energy production amount or the power sales amount is possible 31 ENG Version 140818 ESS Report Load vs ESS Discharge vs PV x Qo Load PV 5 ESS Charge o ESS Discharge CO Sales MAY 16 2014 MAY 16 2014 v 9 Van eo 4 WQ SS E amp d 3 ESS Report page 5 3 6 4 ESS forecast In the ESS Forecast menu the generation amount forecast information and the guide for optimized operation can be checked through the algorithm mounted on the product 5 3 6 5 Notice When there is an update or other changes in the service the notice message can be checked 5 3 7 Mobile Service For the customers using Android or I Phone the product status can be easily checked on the move through the smart phone To use the mobile service the customer must first register the membership through the webpage and use the ID and the password to log in and use the service E Friday May 16th 2014 12 00 Mobile service 32 ENG Version 140818 6 Maintenance and Cleaning Warning Do n
35. th the IP21 may cause failure and the product will not be guaranteed for any related accident or damage For details refer to the Installation Guide The Figure below is the complete connection 2 1 3 Technical Specifications Units PV input quantities Vmax PV absolute maximum DC 550V PV input operating voltage range DC 125 500V Maximum operating PV input current per string DC 15A Isc PV absolute maximum DC 20A 9 ENG Version 140818 10 Max inverter backfeed current to the array AC output quantities AC 230V 184V 264 5V AC 25A 68 6A peak 100us 50 Hz 47 5Hz 51 5Hz 4600W or VA 0 95 1 0 95 AC Current peak duration 420A Ams Maximum output over current protection AC 30A RMS Harmonic distortion of output current 5 at THD lt 2 Pac gt 0 5 PAcnom AC input quantities Voltage nominal or range Current maximum continuous Current inrush Frequency nominal or range Power maximum continuous Power factor ranger Maximum output fault current AC 230V 184V 264 5V AC 20A Voltage nominal or range Current maximum continuous Current inrush AC 68 6A peak 100us Frequency nominal or range 50 Hz 47 5Hz 51 5Hz DC input other than PV quantities DC 60V nominal Range 43 67V Battery Current nominal continuous DC 33 3A Battery Current max continuous DC 46 5A Average discharge depth 90 DOD 6000cycles DC output other than PV quantities DC 60V nominal
36. the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated through the protection function Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated through the protection function Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated through the protection function Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated through the protection function NORMAL BATT Wait until the event message disappears STATUS EVENT After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event
37. vent message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is 38 BATT OVER CURRENT PROTECTION automatically restored to normal If it is not removed until the time limit it is converted to significant event The operation mode is terminated in most significant PROTECTION Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event 7 2 3 Battery Discharge General Events ON SEQUENCE GRID OFF PROTEC TION PROTEC TION E202 ON SEQUENCE BATT STATUS EVENT ON SEQUENCE INV DC LINK EVENT PROTEC TION ES PROTEC TION ON SEQUENCE BATT V amp BATTI EVENT PROTEC TION NORMAL GRID OFF ENG Version 140818 During Battery Discharge operation Battery Discharge operation is terminated through the protection function Wait until the event message disappears After the event message is removed it is automatically restored to normal If it is not removed until the time limit it is converted to significant event During Battery Discharge operation Battery Discharge operation is terminated through the protection function Wait until
38. vice line Refer to the contact Power Meter Distribution Box 3 6kWh Al in One 2 1 1 Identifying the Product On the enclosure of this device Type Label is attached In the Type Label the identity of this product is described The contents below are indicated on the Type Label For safe usage the user must be well informed of the contents in the Type Label The Type Label includes Product Name Device Type Model Serial Number Serial No Device specific characteristics Certification Lists Warnings and Notification The model No of 3 6kWh All in One system is defined as below ESLR362 00001 7 ENG Version 140818 ESLR Residential application 36 Battery capacity x0 1kWh 2 Battery capacity group Less than 10kW 0001 product line number The model No of PCS power conditioning system is defined as below SJ94 00108A SJ battery for ESS 94 Ass y 00108 product number A version type The Table below is the Type Label SAMSUNG SDI umm Max Voltage a Photovoltaic System No ELSR362 00001 ege Mix PY Current Inverter No SJ94 00108A Per String AC Nominal Power 4600W C C P oy AC Nominal Voltage AC Frequency Output AC Nominal Current anm 230V 50Hz 20A XI AN w 0 95 1 0 95 gd 40m n Battery Type i a ezana Battery Capac m Input Output Nominal Voltage Protection Degree Class IEC 62109 1 2 AR N 4105 VDE 0126 1 1 MADE IN KOREA 2 1
Download Pdf Manuals
Related Search