User Guide Installation Model (1)
Contents
1. Electromagnetic Lock Installation User Guide Indoor Model Spec Model 300 LED i200 LED Holding Force 300 Ibs I36 Kg 600 Ibs 272 Kg 1200 Ibs 545 Kg Voltage Input I2 VDC 24 VDC l2 VDC 24 VDC I2 VDC 24 VDC Current Draw 320 mA I6O mA SIO mA 255 mA 500 mA 250 mA General Installation Basic Installation Concept amp Accessories Ui Bracket For Glass Door 12 24 VDC Power Door Frame Cable Wire Glass Door Mounting Plate A Self tapping Screw x10 ee C a ZL Bracket For In Swing Door With Cover EM Lock DSU Bracket For Glass Frame amp Glass Door Glass _ Frame 7 5 V Glass 24 Door ZL Bracket For In Swing Door LS Bracket For Out Swing Door _ Door Frame Anti Residual Magnetism jp Button Door Fram EM Lock Anti Tamper Nut x2 Sexnut Bolt Metal D Washer Pi Allen Wrench EM Lock Guide Pin x2 General Installation Steps amp Maintainance Drill the armature plate holes in the door using the sticker template provided 2 Attach the armature plate to the door with the hardware provided per the illustrati2. on 3 With the door closed mark the door frame at the edge of the armature in order to properly align the electromagnet to the armature 4 Attach the mounting plate to the door frame using the self tapping screws provided LED Status gt Green Locked gt Red Released gt Off No Input 12 VDC etting 24 VDC Setting Align the mounting plate with the mark from the previous instruction Cb u m 12 24vypoc 5 Insert the wires through the hole in the mounting plate and into the electromagnet unit ouer Oua s aD Power Input Attach the electromagnet unit to the mounting plate with the Allen head fixing screw s E LN Hall Effect Screw in the anti tamper nuts to prevent unauthorized access and to prevent the fixing n cl A screw from loosening over time Hall Effect s i O r c p 7 Connect the power wires according to the instruction and test the system Sensor Input leh 8 It is recommended that you apply a light coat of silicon lubricant to the mating surface on a monthly basis to prevent rust _ IMPORTANT _ Trouble Shooting Set the jumper position according to the power input correctly before Sensor not functioning Improper attachment of electromagnet and armature iad i Modification of the PCB Door not locked Incor
3. rect wiring or no power from power supply Reduced holding force Poor contact of electromagnet and armature Be sure armature is loose enough that it can fully contact Copyright Ebelco Industries Sdn Bhd electromagnet along the entire length All Rights Reserved 2007 Mating surface is dusty or damaged Improper input voltage or wire size
Download Pdf Manuals
Related Search