OPERATING INSTRUCTIONS
Contents
1. guarantee a specialized and reliable repair service within 24 hours using original LEISTER spare parts e LEISTER Process Technologies rejects any guarantee claims for tools which are not in their original condition The tools must never be altered or changed Technical data and specifications are subject to change without prior notice Your authorized Service Centre is GUARANTEE AND LIABILITY SERVICE AND RE PAIR SPECIAL FEATURES ACCESSORIES Hausanschrift LEISTER Process Technologies Riedstrasse CH 6060 Sarnen Tel 41 41 6627474 Fax 41 41 6627416 wwweleister com sales leister com OPERATING INSTRUCTIONS ILEISTER LEISTER ELECTRON Ly APPLICATION e The ELECTRON is suitable for building into machines installations and appliances and is designed for continuous operation e Drying and heating processes of various types e Shrinking and welding packaging films and moulded parts e Heating conveyor ovens or heat tunnels e Activating and loosening solvent free adhesives and melt adhesives e Sterilizing of packaging materials such as bottles corks and containers e Smoothing the coating on pills putting a shine on chocolates and cosmetic articles e Separating and fusing synthetic fibres and fabrics e Soldering processes on thin metal parts e Soldering and de soldering SMD and thru hole components e Speeding up mixing processes and dissolving foams which can arise during mixin filling containers e Welding thermoplastic ma2. Operation e Connect tool to the mains e The mains connection cord should have the corresponding cross section area of conductor and should be fitted by an electric engineer e As required push fit appropriate nozzle or reflector e Adjust the hot air temperature via the Potentiometer 4 e As required reduce the air flow with the regulating screw 3 e Make sure that the hot air can flow freely fire hazard e The LEISTER Company as well as the authorized Sales and Service Centres offer advice and an introduction to the areas of application of hot air tools free of charge see page 1 e After use let the tool cool down by letting cold air flow through it preventing warm air back pressure CAUTION The mains connection must have a device for disconnect all poles from the mains with a 3 mm distance between contacts In the event of functional interference eg caused by the atmosphere disturbance or voltage fluctuations the minimum air flow page 2 should be adhered to otherwise the tool could be damaged e Only LEISTER accessories must be used e Let the tool cool down before changing the nozzle or reflector e Temperature adjustment with external potentiometer e Temperature control signal with external control voltage VDC e Temperature control with additional LEISTER cascade controller KSR should only be fitted and adjusted by the LEISTER Company e Repairs have to be carried out by authorised LEISTER Service Centres only They
3. terials e Removing plastic mould flash and putting a shine on plastic surfaces Please read operating instructions carefully before use and keep for fureference WARNING Installation e only cold air is sucked in Danger When opening up the tool live components no warm air back pressure develops and connections are exposed Therefore before ope the hot air tool is not in direct line of another hot air tool ningit disconnect all poles from the mains e Protect the tool from vibration and shock Start up Incorrect installation and use of hot air tools can pre AAN senta fire and explosion hazard CAUTION E The voltage rating stated on the tool should corresp Do not touch the element housing and nozzle when ondto the mains voltage Cs hot as they can cause burns Do not point the hot air flow at people or animals Protect tool from damp and wet The equipment should not be operated without l supervision F RSTN TEST SIGNS 2 of TECHNICAL DATA Order No ELECTRON Voltage V 120 200 230 230 Frequency Hz 50 60 Capacity W 2400 3400 2300 3400 Minimum air flow I min 360 Noise Db A 65 Maximum temperature C 40 650 Weight kg 1 15
Download Pdf Manuals
Related Search