Home
        American Standard 3395B.001.021 Installation Guide
         Contents
1.      Review Step 7 of installation procedure     Review Step 1 through 6 of installation procedure        Toilet does not  shut off    Toilet bowl  rocks after  installation      Flapper seal leaking or deformed     Sand or debris lodged in water control     Flush valve chain too tight  holding flapper open       Wax ring not fully compressed     Floor not level       Clean debris from seal surface  Replace flapper seal as needed  See web for more info     Shut off water supply  Remove cap and clean as per Fluidmaster maintenance instructions at     www americanstandard us com enews fluidmasterguide  pdf  Readjust chain length as needed       Retighten bowl to floor knobs     Use toilet shims and  or place a bead of caulk around the base of the toilet           In the United States   American Standard Brands  P O  Box 6820  Piscataway  New Jersey 08855  Attention  Director of Customer Care   For residents of the United States  warranty  information may also be obtained by calling  the following toll free number   800  442 1902   www americanstandard com    In Canada    AS Canada  ULC  5900 Avebury Rd   Mississauga  Ontario  Canada L5R 3M3  Toll Free   800  387 0369  www americanstandard ca    In Mexico    American Standard B amp K Mexico   S  de R L  de C V    Via Morelos  330   Col  Santa Clara   Ecatepec 55540 Edo  Mexico  Toll Free  01 800 839 1200   www americanstandard com mx       7301964 100 Rev  A    
2. INSTALLATION INSTRUCTIONS urat  CARE AND MAINTENANCE Aandord    Champion  4 HET 2 piece Toilet  241AA Series Champion  4 HET Right Height   Elongated  241BA Series Champion  4 HET Right Height   Round Front    Thank you for selecting American Standard   the benchmark of fine quality for over 100 years  To ensure this product is installed properly  please read  these instructions carefully before you begin   Certain installations may require professional help   Also be sure your installation conforms to local codes     CAUTION  PRODUCT IS FRAGILE  TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE   NOTE  Pictures may not exactly define contour of china and components     TANK 4149A    EZ INSTALL KIT INCLUDED WITH TANK    Tank To Bow  Gasket Attachment Handles Plastic Washers  2   with Nuts  2     BOWL 3395A RIGHT HEIGHT   ELONGATED  BOWL 3395B RIGHT HEIGHT   ROUND FRONT    EZ INSTALL KIT INCLUDED WITH BOWL    OO  I I co cape    Wax Ring T Bolts with Retainer  2  z      Bowl To Floor  Knobs  2     SOLD SEPARATELY    KEK KK KKK KKK KK KKK    RRR SS     Water Supply Line  ies Slow Close  Toilet Seat       Product names listed herein are trademarks of AS America  Inc  7301964 100 Rev  A     AS America  Inc  2013    730196    4 10       OA          USE    FUTURE    R    FO    SAVE    ROUGHING IN DIMENSIONS  NOTE  Distance from wall to closet flange centerline must be as listed below  12   305mm   Champion  4 HET 241BA Series Right Height   Round Front    Champion  4 HET 241AA 
3. Series Right Height   Elongated  FINISHED WALL       18    457mm        1 1 2   m  470mm              1 3 16   30mm       C L OF SEAT POST HOLES  Y 5 1 2   140mm CENTERS                 AS  REQ D  16 1 2    419mm       SUPPLY       9 3 8  13 13 16  FINISHEN    238mm   351mm  FLOOR    C L OF OUTLET  Before You Start     Turn Off Water Supply   Flush to remove  water from tank   sponge remaining  water from   bowl before  removing toilet                                      Recommended fitting type for  back to back installations           FINISHED WALL    28 1 4        9 1 8    232mm     1 3 16   30mm      16 1 2      419mm     C L OF SEAT POST HOLES  yf 5 1 2   140mm CENTERS      718mm        18    457mm           SUPPLY  AS  REQ D  16 1 2    419mm     et       9 3 8  _  13 7 16     FINISHEDS     238mm   341mm  FLOOR  2     ___    _cyL OF OUTLET    12   305mm  1    BACK TO BACK INSTALLATION    Press firmly     0    254mm       A Caution  If leaving floor flange    open for more than 1 2 hours   cover flange to prevent escaping    sewer gases        Depending upon your plumbing and venting conditions  the flow from the Champion   4 HET in a  back to back installation may create a vacuum on the system and draw water from the opposing  bowl  The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as  throw over is possible  The code does approve a directional  Y  style fitting with proper venting to  direct the water downward and away from the othe
4. oroughly with clear water and dry with a soft cloth   WARNING  Do not use in tank cleaners  These products can seriously corrode fittings in the tank  This damage can cause leakage and property damage   American Standard shall not be responsible or liable for any damage caused by the use of in tank cleaners     TROUBLESHOOTING GUIDE   See Step 8 For Diagram    Problem Possible Cause    Corrective Action       Does not flush      Water supply valve closed      Supply line blocked      Flush valve chain too loose or disconnected     Sand or debris lodged in water control       Open valve and allow water to fill tank     Shut off water supply  disconnect supply line and inspect all gaskets and washers  Reassemble     Readjust chain length as required       Shut off water supply  Remove cap and clean as per Fluidmaster maintenance instructions at     www americanstandard us com enews fluidmasterguide pdf       Poor or  sluggish flush      Bowl water level too low       Supply valve partly closed     Partially clogged trapway and or drain pipe and or vent     i Supply pressure too low       Check that refill tube is connected to water control and inserted into overflow tube without being    kinked or damaged       Open supply valve fully  Be sure that proper supply tube size is used     Remove obstruction  Consult a plumber if necessary       Normal supply pressure must be at least 20 psi        Toilet leaks      Poor supply line connection     Poor bowl to tank floor connection  
5. r toilet     Wax Ring   sold separately     7301964 100 Rev  A    Apply weight evenly   Do not move after  placement  Water  tight seal may break     Hand tighten  only  Do not  overtighten     Tighten handles  alternately until the  tank contacts the  front and back of the  bowl achieving  china to china  contact              NOTE  To ease  installation  push  down on the top of  the tank while  tightening handles           A WARNING  Overtightening of  water supply line nuts could  Connect water result in breakage and potential    supply line    Sold separately   Hand tighten nut     flooding  If the connection leaks  after hand tightening  replace  the supply line  Do not use any  type of sealant on the water  supply connection  Use of  plumber   s putty  pipe dope  or  any other type of sealant will  void the warranty     Turn on water supply         3  7301964 100 Rev  A    Water Level  Adjustment Knob     A  Refill Tube    Adjust water level to level  indicated on tank by turning  water level adjustment knob  to move float cup up or down     Trip Lever Rod       Approximate  Water Level       Float Cup Flush Valve Chain    Fill Valve va Flapper  Or Water    Flapper Flush  Control A 7 Seal Valve    Pa g  Overflow    Tube                                                                            Tank to Bowl Gasket    REPAIR PARTS LABEL  LOCATED UNDER TANK LID     Water Supply Line    CARE AND CLEANING    When cleaning your toilet  wash it with mild  soapy water  rinse th
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Nikon MV-1 User's Manual  TRANSFORMADORES DE DISTRIBUCIÓN con CUBA  pH 3210  Ⅳ デザイン関係統計資料  Magnadyne MV-DVD-PL7 User's Manual  PTR-PTI mode d`emploi Entreprise  SH265 Manual de Servicio  800 Watt Power Inverter Inversor de corriente de  SG製品含有化学物質管理基準〈第 2版〉 - 三光産業株式会社 (Sanko  SF06.MachineSafetySolutionsOverview    Copyright © All rights reserved. 
   Failed to retrieve file