1. ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING TO AVOID RISK OF ELECTRICAL SHOCK READ INSTRUCTIONS CAREFULLY AND TURN ELECTRICITY OFF AT MAIN FUSE BOX BEFORE BEGINNING INSTALLATION NOTE BEFORE INSTALLING CONSULT LOCAL ELECTRICAL CODES FOR WIRING AND GROUNDING REQUREMENTS THE following rules must be complied when installing light fixtures If you have any doubts about how to install all a light fixture of if it fails to work properly contact a local licensed electrician make certain 1 Make sure all the wires have not been damaged during installing 2 Attached the lamp holder to the hole of the fixture then tighten with a washer and lock nut 3 Make wire connections of the fixture 4 Secure the top loop to the nipple then clamp the order end fink of chain to top loop 5 Attach the finial to the wire box by inserting the nipple then secure with the fixture 6 Put the glass shades to the lamp holder which must be against the flexible angle to avoid wobble 8 Secure the glass shades with the washer and set screw 9 Install bulbs Maximum wattage on the socket must not be exceeded 10 Turn power on at fuse or circuit box PARTS LIST DARM 2 GLASS 3 SOCKET RING STYLE 30021 om GLET BOX NOU PWN CROSS BAR SCREW NIPPLE LOOP CANOPY RING WIRE NUT