NEC PF-51V21 User's Manual
Contents
1. COLOUR TELEVISION PF 51V21 INSTRUCTIONS Thank you for your purchasing this NEC colour television To ensure your complete understanding please read this manual thoroughly before operation Contents 1 Specifications cc eceeee 1 6 Control Your TV 0eceneeeee 6 2 Important safeguard 4 2 7 Tuning Procedure 006 9 3 Television Installation 3 8 Menu Operation 00000 10 4 Control Panel scceeeeeeeeees 4 9 Trouble Shooting 006 13 5 Remote Control Hand Unit 5 1 Specification B G PAL NTSC 3 58 4 43 AV input only VHF Low channel VL 46 25 to 168 25 MHz VHF high channel VH 175 25 to 463 25 MHz UHF channel U 471 25 to 863 25 MHz AC 240V 50 60 Hz Maximum 115W Picture tube 55 cm Television RF system Colour System Channel and frequencies Power input Power consumption Screen size Visible area 51 cm 5 W 5 W Rated output 5 cm x 9 cm oval x 2 VIDEO inputs RCA at rear and front left AUDIO L R inputs RCA at rear and front left S Video input at rear VIDEO output RCA at rear AUDIO L R output RCA at rear Headphone jack mini jack dia 3 5mm at front left 585 x 520 x 465 24 1 kg Remote control unit RE 001 x 1 measured diagonally Audio output Speakers External input output Dimensions WxHxD Weight Accessories AAA R03 UM 4 dry battery x 2 All specifications are2. Sharpness Tint Ll C PICTURE J BRIGHT fm A By pushing the La key Picture Menu will appear CONTRAST COLOUR B Select each function using the P P keys SHARP TINT C Each value can be controlled by the V V keys D Repeat any functions if required NOTE TINT control will be appeared only if a NTSC signal is being received 8 6 SOUND MENU Function Bass Treble Balance gt SOUND A By pushing the key Sound Menu will appear BASS B Select each function using the P P keys TREBLE C Each value can be controlled by the V V keys BALANCE D Repeat any functions if required HEADPHONE HEADPHONE VOL 12 9 Trouble Shooting Before arranging for service firstly know the status and then check simply as follows No picture or sound Check if the power supply is plugged in Check if the power switch is in on position Picture is OK no sound Check if the volume control is set to the minimum or mute position Remote control doesn t work Check if the power switch is in on position Check if the batteries are out of use or not connected well Make sure that there is no strong light striking the sensor window of remote control unit Check there are no obstacles between the sensor window and remote control unit No TV signal Check if the TV AV button is not set to TV status Check if the antenna is well connected rd Check if you installed the TV correctly No exter
3. selected by Channel Up Down keys A Push MENU key repeatedly to select PRESET PRESET B Using P or P key select POSITION ASM POSITION Using V or V key change POSITION BAND C Using P or P key select SKIP O SKIP AFT FINE TUNING SEARCH SWAP Using V or V key select ON or OFF 7 6 SWAP Function Program Number and Channel exchange A Push MENU key repeatedly to select PRESET PRESET B Using P or P key select SWAP ASM i POSITION Using V or V key enter to SWAP BAND C Using P or P key select PROGRAM A SKIP AFT or PROGRAM B FINE TUNING D Using V or V key or numeric keys change SEARCH PROGRAMA No or PROGRAM B No E SWAP E Pushing P or P key select EXCHANGE Push V or V key repeatedly until OK is displayed on screen PROGRAM A and PROGRAM B are exchanged PROGRAM EXCHANGE PROGRAMA 6 PROGRAM B 2 EXCHANGE OK 8 Menu Operation 8 1 MENU key on front TV mode Push MENU key continuously to scroll through the MENU selection as follows PICTURE gt SOUND gt TIME gt SETUP gt PRESET gt NORMAL AV mode Push MENU key continuously to scroll through the MENU selection as follows PICTURE gt SOUND gt TIME gt SETUP gt NORMAL E o ee st Se 8 2 MENU key on the remote handset TV mode MENU key select
4. subject to change without notice 2 IMPORTANT SAFEGUARDS Warning To prevent fire or shock hazard do not expose this TV set to rain or moisture LOCATION Place the TV set on a flat level surface and in a dry area free from dust and moisture Do not place the unit in direct sunlight or where it would be affected by smoke steam vibration or heat from heat radiating appliances To prevent excessive internal temperature rise place the unit so that there is at least 15 cm of space between it and the surrounding walls FIRE AND SHOCK PRECAUTIONS e Adequate ventilation must be provided to prevent heat build up inside unit Keep the inside of unit free from foreign objects such as hairpins nails paper etc Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated Do not place it on carpet or a bed as low ventilation holes could become obstructed J Do not set liquids including flower vases and vessels filled with chemicals or water etc on top of the unit as liquid could get inside the unit If a hazardous object falls inside the TV set unplug it immediately and call a qualified technician for removal When placing or moving the TV set take care to insure that the power cord is fitted into the allocated slot To avoid damage to the power cord never allow heavy objects such as the TV set itself to be placed on the power cord Keep cord away from heat radiating appliances Do not allow cord to bec
5. edly to select PRESET B Push P or P key to select ASM C Push V or V key to start ASM and memorize into program list 0 129 D Wait until function has finished PRESET 5 ASM POSITION BAND SKIP AFT FINE TUNING SEARCH SWAP EJI EENG 7 2 SEARCH A Push MENU key repeatedly to select PRESET B Using P or P key select POSITION Using V or V or numeric keys to change POSITION Number C Push P or P key to select BAND Push V or V key to change BAND D Push P or P key to select SEARCH E Push V or V key to start search F Wait until function has finished PRESET ASM POSITION BAND SKIP AFT FINE TUNING C SEARCH SWAP E heared 7 3 FINE TUNING A Push MENU key repeatedly to select PRESET B Using P or P key select POSITION Using V or V change POSITION C Using P or P key select FINE TUNING D Using V or V key adjust for best tuning 7 4 AFT Function Automatic Fine Tuning Keep Tuning at the best position always A Push MENU key repeatedly to select PRESET B Using P or P key select AFT Using V or V key to set AFT ON or OFF PRESET ASM POSITION BAND SKIP AFT D FINE TUNING SEARCH SWAP 7 5 SKIP Function Use to SKIP Channels After setting to ON the channel will not be
6. his earphone jack sound from speakers would not be muted MAIN SWITCH Volume conontrol for MENU Push this switch to turn Mains Power On the earphone can be TV AV done independently VOLUME UP DOWN CHANNEL UP DOWN Push again to turn Mains Power Off Power Indicator When Mains Power On this will be lit Power ON GREEN Power OFF RED ON TIMER set ORANGE Rear Terminals Remote Control Window Receives the remote control signal Antenna In 75Q Audio R Video L Audio Video Output L Mono R Video Audio Video 1 Input S Video Input 5 Remote Control Hand Unit Please refer indicated pages TV AV Select Ref P7 Power Standby Ref P6 Sound Volume Up Down Ref P6 MENU Ref P10 Channel Up Down Ref P6 Call Ref P7 Mute Ref P7 Child Lock Ref p8 Direct Access Numeric Keys Ref P6 Quick View Ref p7 Channel Scan Ref P7 ZOOM Ref P6 Picture Effect Ref P8 Effect Ref P8 Surround Sound Picture MENU Ref P12 Sound effect Ref P8 Sound MENU Ref P12 6 CONTROL YOUR TV 6 1 MAIN Power ON OFF W X This switch will turn the television ON OFF totally With Mains status On you can also turn off using Remote Control Hand Set This status is cal
7. led Stand By mode In this mode X You can also turn ON the TV by pushing the Channel Up Down keys on the front controls X The TV has an Automatic Power OFF function With No Signal condition the TV will automatically turn OFF after 10 min 6 2 V A p Channel Up Down O A PROG im Push P key to change Channel Up Push P key to change Channel Down tF P Direct Access Tuning Using the numeric keys on Remote Control Hand 1 Piece Channels can be selected directly Or repeatedly press the button to select the desired mode then press numeric buttons s 1 digit mode 2 digit mode q1 3 digit mode Max Ch 129 Volume Control Push V key for Volume Up A Push V key for Volume Down l y V QalyoLUME gt t E 6 5 ZOOM Push ZOOM key to change as follows ZOOM Ta NORMAL gt WIDE ZOOM WIDE picture height is reduced ZOOM picture height is expanded 6 6 MUTE W By pushing this key sound output will be muted Push MUTE again or Volume Up Down and O ame O fa sound Volume will return cf MUTE 6 7 TV AV Selection You can select your video TV AV TVIAV source by the TV AV key fy 6 8 QUICK VIEW Qv TV Mode Channel will quickly return to the previous Channel being watched AV Mode Back to TV channel 6 9 Channel Scanning SCAN By pushing this key Channels will change automatically Each channel will be
8. nal video signal Check if you installed the TV correctly enn enrio vaso min OO too dark Al channels lose colour Check if the antenna is broken intermittently Check if the antenna is disconnected Check if the antenna is damaged Poor reception loss of colour Check if channels are correctly tuned see Fine tuning S S Diagonal stripes appear on The receiver may be affected by interference e g from nearby radio Picture has snow Check if the antenna is broken Check if the antenna is disconnected Check if the antenna is damaged Ghost images appear Check if the antenna direction has been changed by a storm or strong wind etc because ghost images are caused by the arrival at the antenna of both the signal which has traveled directly from the transmitter and the signal which has been reflected from a hill or a large building The direction of the antenna should be chosen for minimized ghosting 13 NEC NEC Australia Pty Ltd ABN 14 004 803 490 Home Electronics Group NEC Service Centres NEW South Wales Sydney 184 Milperra Rd Revesby 2212 02 9780 8688 Newcastle 120 Parry Street Newcastle West 2302 02 4926 2466 Victoria Melbourne 480 Princes Highway Noble Park 3174 03 9554 6245 Queensland Brisbane 116 Ipswich Rd Woollongabba 4102 07 3361 5858 Southport Shop 1 48 Ferry Rd Southport 4215 07 5591 3670 South Australia Adelaide 84A Richmond Road Keswick 5053 08 8375 5710 Wes
9. o repeat steps 1 2 and 3 for the best result 2 3 Television Installation Connect antenna or video facilit 1 Use 75 Q coaxial cable plug or 300 75 Q impedance converter to plug in antenna input terminal on the rear of the cabinet 2 Connect the video facility to the audio video in jack on the rear of the cabinet VHF Antenna 7 UHF Antenna Mixer Antenna injak ps croaxial cable O y Antenna in jack 75 Qoaxial cable Audio out VCR Video out VCR Battery installation and replacement for remote control unit The remote control unit uses two 1 5v AAA batteries For battery installation and replacement see as follows 1 Turn the remote control unit upside down Press 7 a down the grip of the battery compartment and slide the cover in the direction of the arrow a 2 Install two new batteries make sure that battery polarity matches with the marks inside the O Dp compartment otherwise it would damage the unit O S DaD 1 O O Ww LQ 3 Close the battery compartment cover H gt amp ig O p 4 Control Panel Front Controls Audio 2 Left Input Audio 2 Right Input Video 2 Input Earphone jack NOTE When plug in to t
10. ome knotted or tangled Do not lengthen the cord When removing the power plug from the socket always hold onto the plug never pull by the cord WARNING e Do not remove the back cover of the TV set Accidental contact with high voltage components could result in electric shock When internal adjustment is necessary please contact your distributor J If your set produces sound but no picture or it emits smoke or produces a strange sound or smell continued operation is dangerous Immediately turn off power and remove the power plug from the socket and contact your distributor e During vacation or other occasions when you will not be using the set for an extended period remove the power plug from the socket J This appliance should not be operated by children or infirm persons without adequate supervision If a continual DISCOLOURATION or a COLOURED PATCH appears on your picture image it may be caused by one of the following e External speakers placed near to the TV e Vacuum cleaners switched ON or OFF near the TV e Moving or rotating the position of the TV while it is turned on e The TV has been left in the STANDBY mode for some period of time without being turned OFF using the front panel power button If this happens then 1 Switch OFF the TV by using the FRONT PANEL POWER button 2 Leave the TV switch OFF for at least 20 minutes 3 Then switch ON the TV using the FRONT PANEL POWER button Note You may need t
11. previewed for 3 seconds and stop at original channel Skipped channels will not be previewed 6 10 CALL CALL This key will call the On screen display Ta Push again to remove the on screen display OFF Timer and clock These two options appear after Channel No Colour system being set clock 6 11 Picture EFFECT gt d er By repeatedly pushing this key picture T effects will change as follows STANDARD gt RICH gt SOFT PERSONAL STANDARD Coo i X TINT setting is not included Personal is the last setting made by you 6 12 de SOUND EFFECT By repeatedly pushing this key sound y rep yp g y NORMAL effects will change as follows PERSONAL gt ROCK gt POP gt JAZZ NORMAL 6 13 ED SURROUND SOUND EFFECT By repeatedly pushing this key T surround sound effects will change as follows SPACE gt HALL gt THEATRE gt SURROUND OFF SPACE 6 14 LOCK LOCK By pushing the LOCK key lh the lock screen will appear CHILD LOCK By pushing this key again for over 3 seconds continuously LOCK situation will change OFF In LOCK On status front panel buttons will be locked except when turned off by the same LOCK procedure T Tuning procedure 7 1 Auto Search Function Automatic Search and Memory ASM is available for program installation from Antenna input Using MENU key on the front or MENU key on the Remote for ASM A Push MENU key repeat
12. s as follows TIME gt SETUP PRESET gt NORMAL o ee 10 AV mode MENU key selects as follows TIME gt SETUP gt NORMAL ee 8 3 TIME The ON OFF timer cannot be set unless the clock has already been set A Select TIME with the MENU key aM Using the P P key select the item s CLOCK B Using the P P key select CLOCK OFF TIME OIE or ON TIME ON TIME POSITION C Using the V key minutes will increase from 00 to 59 ALARM Using the V key hours will increase as follows 0 1 23 D Using P P keys select POSITION Using V V keys change POSITION E Using P P keys select ALARM Using V V keys ALARM timer can be set After presetting preset time has come alarm symbol will be displayed on screen The timer can be set 0 to 90 Minutes 8 4 SETUP Setup your TV as your favorite SETUP A Using the MENU key select SETUP Using the P P keys select the item B Using P P keys select BLUE BACK or C SYS Using the V or V keys change to ON or OFF D Pushing P P select C SYS Using the V V keys the colour system will be BLUE BACK C SYS changed as follow TV MODE AUTO gt PAL gt N4 43 gt N3 58 AV MODE AUTO gt PAL gt N4 43 gt N3 58 11 8 5 PICTURE MENU Function Brightness Contrast Colour
13. tern Australia Perth 45 Sarich Court Osborne Park 6017 08 9446 5333 For Service in outer areas please contact your NEC retailer for the address of the nearest Authorized NEC Service Centre NEC Australia Pty Ltd 244 Beecroft Road EPPING 2121 Tel 131 632 Fax 02 9930 2380 14
Download Pdf Manuals
Related Search