Miele TOUCHTRONIC T 8012 C User's Manual
Contents
1. Door Access panel to condenser 28 Four height adjustable feet Optional drain hose An alternative to using the condensed water container is to drain condensed water into a sink standpipe or gully Installation Rear view Handle for transportation arrows 2 Air intake opening to cool the condenser 3 Power cord with plug Condensate drain hose Accessories for connection to a sink standpipe Installation site N Do not install the dryer in an area where it can be blocked e g behind a door N This appliance is not intended to be mounted in a wall or other vertical surface of a building or cabinet The unit is allowed for built in application Transporting the dryer to the installation site The rear excess end of the lid has a handle box for transport m Use the front dryer feet and the rear excess end to transport the dryer from the packaging base to the installation site 29 Installation Installation beneath a counter N When the machine lid needs to be removed to reduce the height of the machine a built under spacer kit is necessary It must be installed by a Miele Service Technician The cover plate of the built under kit replaces the appliance lid and ensures electrical safety An installation manual is supplied with the built under spacer kit The electrical connection should be near the dryer and accessible at all times2. Close zippers and tie up fabric belts and apron ties to prevent tangles and damage to clothing Do not dry items that may melt or ignite in the dryer such as plastics rubber or sneakers Program recommendations Normal Cottons and Permanent Press blends Wrinkle free Permanent Press select the Hand Iron dryness level and reduce the load size for best drying results Delicate fabrics such as polyester select the Gentle option to reduce creasing Pure linen and down filled items Woolens Wool and wool blends Smooth Linen Permanent Press cottons blends and synthetics Sturdy Durable Cottons and Permanent Press Fluff 20 min 45 min All fabric types Using the dryer 1 Turn on the dryer and load the laundry m Press the On Off button to turn on the dryer m Press the Door button to open the door m Load the laundry loosely into the drum m Make sure the lint filters are in place m Close the door with a firm swing do not push it shut For best results use liquid fabric softener when washing laundry Fabric softener sheet may clog the filters and cause the dryer to overheat To prevent fabric damage check that laundry will not be caught in the closed door 2 Select a program Programs ONormal O Sturdy OWrinkle free O Fluff OWoolens O20 min OSmooth O45 min v Gp m Press the V or A button until the desired
3. installed and grounded in accordance with all local codes and ordinances 24 WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded Do not modify the plug provided with the appliance If it will not fit the outlet have a proper outlet installed by a qualified electrician If there is any doubt concerning installation contact Miele s Technical Service Department Caring for the environment Disposal of the packing materials The packing materials protect the appliance during shipping They have been designed to be biodegradable and recyclable To prevent suffocation ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of children Disposal of an appliance Old appliances may contain materials that can be recycled Please contact your local recycling authority about the possibility of recycling these materials Ensure that a discarded dryer presents no danger to children When being stored for disposal remove the door to the drying compartment 25 Washer Dryer Stack The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation An appropriate stacking kit is required The stacking kit is available from your Miele dealer or t
4. m Select a dryness level available in the Normal and Wrinkle free programs m Press and release the Start Stop button to start the new program 12 Adding or removing laundry during a program m Turn off the dryer using the On Off button m Press the Door button m Open the door N CAUTION Do not touch the rear of the drum while adding or removing items There is a danger of burns due to high temperatures in the drum m Add or remove items m Close the door m Turn the dryer back on with the On Off button Child lock Child lock When activated the child lock prevents the dryer from being operated by locking the control panel functions The dryer can be turned on but not started The Child lock indicator will flash The door can be opened To activate the child lock 1 Make sure the dryer is turned off and the door is closed 2 Press and hold the Anti crease and DRYNESS buttons at the same time hold until step 5 3 Turn on the dryer with the On Off button 4 Press the OPTIONS button 3 times 5 Release the Anti crease and DRYNESS buttons The Child lock indicator will flash and the dryer is now locked 6 Turn off the dryer using the On Off button To deactivate the child lock Repeat steps 1 to 5 The Child lock indicator will go out The control panel is now unlocked 6 Turn off the dryer using the On Off button Dryer care Cl
5. sink or a standpipe so that the condensed water container does not have to be emptied Drain hose length 4 11 1 5 m Maximum delivery head 000 4 11 1 5 m Maximum drain length 13 ft 4 m If the hose is not long enough an extension hose is available as an optional accessory from the Miele Installing the drain hose Do not pull or kink the drain hose it may be damaged m The drain hose holds a small amount of remaining water Keep a container at hand 32 PEEN mi m Pull the drain hose off the holder m Drain remaining water in the container m Unwind the hose from the holder and carefully pull it from the clamps m Guide the hose depending on the installation to the left or right m Leave the hose in the middle clamp to prevent the drain hose from becoming kinked Installation Draining the condensed water into a sink m Secure the hose carefully e g by tying the hose to the water tap to avoid damage by overflowing water m Use the curved guide to prevent the drain hose from becoming kinked see Front view illustration Connection to a standpipe m Insert the drain hose into the Y adapter of the sink 33 Installation Installation requirements demanding a non return valve N To prevent water from flowing back into the machine a non return valve must be installed at the following installations Installation to a sink stand
6. Buzzer button to have a tone beep at the end of the program Indicator light on buzzer selected off buzzer not selected To adjust the buzzer volume turn the dryer on close the door select a program if the indicator is lit press the Buzzer button so the indicator light goes out m Press and hold the Buzzer button until its indicator is lit and you hear the desired volume and tone Using the dryer 6 Start the program Start gt gt es m Press the Start Stop button Once the program starts the current cycle of the program will be indicated in the STATUS display 7 At the end of a program The End Anti crease indicator will light at the end of a program and the buzzer will sound if it was selected If a fault occurred a FAULT indicator will light See Frequently asked questions for details nae m Press the Door button m Open the door m Remove the laundry m Check that the drum is empty m Clean the lint filter after each use see Dryer care m Close the door ers m Press the On Off button to turn off the dryer m Empty the condensed water container weekly if not connected to a drain Using the dryer Canceling or changing a program m Press and release the Start Stop button to stop the drying program To continue drying m Select the new program by pressing the V or A button m Select any desired options
7. Extended machine feet are recommended at a built in height of more than 33 1 46 840 mm m Set the extended machine feet ona height of 1 9 46 40 mm Remove the original machine feet and replace them with the extended ones One or two filler frames are recommended at a niche height of 34 1 4 134 13446 to 36 36 5 3 870 885 915 930 mm optional accessory An existing continuous toe kick must be interrupted at the dryer location 30 Reinstallation of the machine lid When reinstalling the appliance lid check the firm fit of the cover at the rear bracket for a safe transport of the dryer Installation Installation tips An airflow gap of 10 mm must be provided between the machine and the floor This airflow gap must not be blocked by a toe kick or thick piled carpets Do not install the dryer next to a refrigerator The warm air exhausting from the dryer will affect the thermostat of the refrigerator causing it to run continuously Level the dryer m The dryer must be level to ensure safe and proper operation m The machine can be leveled by turning the legs clockwise or counterclockwise as necessary 31 Installation External water drain When drying is in progress condensed water is pumped into the condensed water container through the drain hose at the back of the dryer The condensed water can also be drained directly if the machine is installed near a
8. Miele TOUCHTRONICQ Operating and Installation Instructions Condenser Dryer T 8012 C T 8013 C To prevent accidents USACDN and machine damage USA CDN read these instructions HT21 1 HT21 2 before installation or use M Nr 06 881 320 Contents IMPORTANT SAFETY INSTRUCTIONS a 3 Control panel 0 0 0 0 0 0 0c tenes 5 Before loading the dryer 0 0 0 6 Using the dryer 0 0 0 0 ee 7 1 Turn on the dryer and load the laundry 0 2000 000 2c eee eee T 2 S6lect a PIOGIAM ee enis nee05 Pes eth ea bed a a R EEA 7 3 Select a drying option if needed eee 9 4 Select the dryness level s sucrase eee eens 10 5 Select the buzzer if desired 0 eee 10 6 Start the program 2 26 eeh 086e ppeae pee peo AAEE pee ee ee 14 7 Atthe end of a program 2 2 eee 11 Canceling or changing a program 02 ee 12 Adding or removing laundry during a program 0000000 e eee 12 Child lock ernis ada e i iae e aon tt tne ae 13 Dryer Care 6 06 casa eaea te ce wnb daria dueed dak eeae Suk Pa a aa 14 Cleaning the lint filter 0 eee eens 14 Cleaning the exterior and the control panel 0 00 0 00 02 ee eee ee 15 Cleaning the drum 2 2 tte a 15 Emptying the condensed water container 0 0 00 ee 16 Cleaning the condenser 0 00 cece cette 17 Quick Guide e eae bs eee eee ede ee deed ee
9. again using jersey material or lightweight cottons More Dry Less Dry For items to be left damp for ironing z Hand Iron f fabrics are too damp dry again using Less Dry Rotary Iron For items to be ironed with a rotary To prevent moisture loss roll up the iron aundry until ready to iron Wrinkle free Availab e drying options Turbo Gentle Anti crease More Dry For items that do not require ironing e g pants and shirts Normal For items to be hung after drying Less Dry For items which require ironing Reduce load size for fabrics that wrinkle easily Special Programs Available drying options Anti crease only available in Fluff Sturdy Woolens Delicate items which allow machine Take items out immediately after the end drying of the program while still slightly damp Allow items to air dry Smooth Program for reducing creasing in z delicate items Sturdy For mixed loads of durable items Fluff Individual items to be freshened and Reduce load size fluffed with cool air TIMED CYCLES Available drying options Gentle Anti crease 20 min Individual items or very small loads 45 min e g beach towels swimsuits Dryer Care Changing the light bulb m Replace the light bulb with a temperature proof bulb available N To reduce the risk of electric from Miele shock disconnect the dryer from the power supply by shutt
10. and a program cannot be started Possible fault Fix The child lock is activated Deactivate the child lock See Child Lock What if the program stops the End A buzzer sounds nti crease indicator lights and the Possible fault Fix The drum is empty Load laundry into the dryer The dryer will not operate when the drum is empty Single items should be dried with Sturdy or a timed program and dry items in the Fluff program 20 Frequently asked questions What if the Filter Vent fault indicator is lit Possible fault Fix The lint filter is clogged Clean the lint filters See Dryer care The air supply in the room is insufficient Open a window or door to increase airflow What if the program runs too long or stops Possible fault Fix The airflow is insufficient in the area of the dryer Open a window or door to increase airflow The lint filters are clogged Clean the lint filters see Dryer care The laundry was not spun sufficiently in the washer Select a higher spin speed in the wash program The dryer is overloaded Reduce the load size Metal zippers interfere with the dryer s moisture sensors Select a timed program to avoid over drying The condenser is clogged with lint or detergent residue Clean the condenser periodically see Dryer care The air vent bel
11. e Miele Service department Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele Our goal is to prevent unauthorized and untrained service personnel from working on your Miele products possibly doing further damage to them you and or your home To learn more about MieleCare Extended Service Contracts please contact your appliance dealer or visit us online at www store miele com sent Installation Instructions To prevent accidents and machine damage read these instructions before installation or use IMPORTANT SAFETY INSTRUCTIONS Installation repair and maintenance work should be performed by a Miele authorized service technician Work by unqualified persons could be dangerous and could void the warranty Be sure to observe local building codes Before installation disconnect the tumble dryer from the electrical supply by shutting off the power main unplugging the power cord or tripping the circuit breaker Do not restore power until the installation is complete GROUNDING INSTRUCTIONS This appliance must be grounded In the event of malfunction or breakdown grounding will reduce the risk of electric shock by providing a path of least resistance for electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly
12. e must be grounded In the event of malfunction or breakdown grounding will reduce the risk of electric shock by providing a path of least resistance for electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Contact a qualified electrician if you are in doubt as to whether the appliance is properly grounded Do not modify the plug provided with the appliance if it will not fit the outlet have a proper outlet installed by a qualified electrician SAVE THESE INSTRUCTIONS Control panel Programs Options Dryness ONormal Extra Dry More Dry Normal Less Dry Hand Iron U Rotary Iron OSturdy OTurbo OWrinkle free O Fluff OGentle OWoolens 020 min OSmooth O45 min CED 4 ieee Status Faults OChild Lock OFilter Vent OContainer N Drying Rotary Iron Hand Iron Normal Cooling Down U End Anti crease VA Programs buttons For selecting a drying program 2 Options buttons For selecting a drying option Dryness button For selecting the dryness level of the fi
13. eaning the lint filter The lint filter must be cleaned after every program m Remove the lint from the door frame lint filter with your fingers m Any lint remaining in the hollow casing of the door can be removed through the gap at the bottom with a dust brush or vacuum m Open the door and remove the lint filter 1 by gently lifting it upwards m Clean the gasket 2 with a damp cloth m Return the lint filter and close the door m Wipe the lint off the filter with your hand do not use any sharp objects 14 Dryer care The lint filters can be rinsed with hot water if necessary m Take the door lint filters out by turning the knob at the filter top m Rinse all lint filters with hot water and dry thoroughly The filters must be dry before being returned to the dryer Wet filters might impair the dryer operation m Return the lint filters Lock the door frame filters Cleaning the exterior and the control panel N To reduce the risk of electric shock disconnect the dryer from the power supply by shutting off the power main tripping the circuit breaker or unplugging the power cord before performing maintenance Never use abrasive cleaners scouring pads steel wool or caustic oven cleaners on the dryer They will damage the surface m The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge m Wipe dry Cleani
14. ele ca info miele ca general enquiries Technical Service amp Support professional miele ca commercial Nationwide enquiries Phone 800 999 1360 MieleCare National Service pate Bas pee shee Phone 800 565 6435 905 532 2272 Fax 905 532 2292 service miele ca technical enquiries All rights reserved 4906 M Nr 06 881 320 00 en US For the most updated manual check the Miele website
15. he Miele Technical Service Department Installation of the stacking kit must be performed by a Miele authorized technician Height of a stacked installation 5 6 9 168 6 cm Stacking kit with a pull out shelf 26 Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded In the event of malfunction or breakdown grounding will reduce the risk of electric shock by providing a path of least resistance for electric current This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded Do not modify the plug provided with the appliance If it will not fit the outlet have a proper outlet installed by a qualified electrician The dryer comes with a 5 ft long 12 4 AWG cord and a NEMA 14 30 P plug It should be connected to a 120 208 240 V 30 A 60 Hz AC power supply A 3 pole 4 wire grounding power outlet NEMA type 14 30 R is necessary 27 Installation Front view Power cord with plug 2 Condensed water container Control panel
16. ing off the The light bulb must not exceed the power main tripping the circuit maximum wattage listed on the data breaker or unplugging the power plate cord before performing maintenance m Flip up the light bulb cover and press it firmly until it clicks into place m Open the door N Make sure the bulb cover is securely closed to prevent a short circuit or penetrating moisture The bulb cover is located along the upper rim of the drum opening m Restore power m Slide a screwdriver with a wide head underneath the side edge of the bulb cover and twist see illustration m Flip down the bulb cover Frequently asked questions What if the dryer will not run Possible fault Fix The Start Stop button was not pressed Make sure the dryer is on Press the Start Stop button to begin the drying program The circuit breaker tripped or the dryer is unplugged Make sure the dryer is plugged in or reset the circuit breaker The door is not closed Close the door properly How do prevent static cling Add fabric softener to laundry when was the dryer hing or select the Less Dry setting on Do not use fabric softener sheets in this dryer What if the drum light does not come on Possible fault Fix The bulb may be bad or burned out See Changing the light bulb What if the Child Lock indicator flashes after turning the dryer on
17. m Load the laundry into the drum Make m Press the W or A button until the sure that there is enough space in the desired program indicator lights drum for clothes to tumble freely 3 Select a drying option if needed Options OTurbo OGentle C Anti crease Co To prevent fabric damage check l that laundry will not be caught in the A drying option can be selected or closed door deselected with each press of the button m Close the door with a firm swing do not push it shut Quick Guide 4 Select the dryness level Dryness Extra Dry More Dry Normal Less Dry Hand Iron Rotary Iron m Press the selection button until the desired indicator illuminates 5 Select the buzzer if desired 6 Start the program Start ms m Press the Start Stop button 7 At the end of a program The Anti crease End indicator will light m Press Door and remove the laundry m Clean the lint filter m Press the On Off button to turn off the dryer Quick Guide Program When to use Note Normal Available drying options Turbo Gentle Anti crease Extra Dry For laundry to be folded and shelved The Extra Dry program should not be immediately e g jeans towels selected for jersey materials Items may shrink More Dry For uniform loads e g sheets underwear socks Normal For knitted items that may shrink e g If items are still damp dry
18. m for reducing creasing of cotton linen or permanent press fabrics made of cotton blends or synthetics Sturdy For mixed loads of cotton and permanent press items Fluff Individual items to be freshened and fluffed with cool air Reduce load size TIMED CYCLES Available drying options Gentle Anti crease 20 min 45 min Individual items or very small loads e g beach towels swimsuits Using the dryer 3 Select a drying option if needed Options OTurbo OGentle OAnti crease m A drying option can be selected or deselected with each press of the button OPTIONS Turbo Fast drying for sturdy fabrics with increased temperature and a reduced program length Gentle For drying delicate fabrics slowly at a lower temperature Anti crease Prevents wrinkles if laundry is not removed immediately after the end of a program The drum periodically rotates for about 1 hour Using the dryer 4 Select the dryness level The dryness level can be selected in the Normal and Wrinkle free programs The dryness level of the other programs cannot be adjusted Dryness Extra Dry More Dry Normal Less Dry Hand Iron Rotary Iron m Press the selection button until the desired indicator illuminates In the Wrinkle free program only More Dry Normal and Less Dry can be selected 10 5 Select the buzzer if desired m Press the
19. ng the drum m The stainless steel surfaces of the drum can be cleaned using a non abrasive stainless steel cleaner m Wipe clean with a soft cloth Dryer care Emptying the condensed water container Depending on the installation the condensed water will either be pumped to a drain or collected in the condensed water container located in the upper left corner of the machine The container holds approximately 1 gallon of water The container should be emptied weekly Should the container be full when the tumble dryer is started or if it becomes full during normal operation The Container indicator will light The buzzer will sound 16 m Pull out the container slightly to the right with both hands m Hold the cap open while emptying the container m When the container is empty push it back into its opening until it clicks into place m Restart the drying program if needed Do not drink the condensed water Dryer care Cleaning the condenser N To reduce the risk of electric shock disconnect the dryer from the power supply by shutting off the power main tripping the circuit breaker or unplugging the power cord before performing maintenance m Clean the condenser every 6 months and when the Filter Vent indicator lights Clean approximately every m Turn the condenser door lock down 100 uses when the dryer is used and remove the door up and o
20. nished laundry Status display Shows the current cycle of the drying program Buzzer button When selected a buzzer will sound at the end of the program FAULT indicators An illuminated indicator will alert you if the child lock has been activated or if a fault occurred Start Stop button Starts and stops a program Interrupts a program when pressed Flashes during program selection and lights once the program starts Door button Opens the door when the program has finished If the dryer is on the drum interior will light when the door is opened If the door is left open the light will go off after a few minutes to save energy On Off button Turns power to the machine on and off Before loading the dryer The dryer must be correctly installed and connected before the first use Please refer to the Installation Instructions Before using for the first time clean the drum with a cloth Before drying check fabric care labels for special drying instructions Dry with normal temperature Dry with low temperature select Gentle option K Do not dry in a tumble dryer Do not overload the drum Overloading the dryer will result in poor drying results and wrinkling Knitted fabrics and flannel tend to shrink when washed and dried for the first time Do not over dry these fabrics To prevent discoloration do not dry new dark colored fabrics with light colored items
21. ow the door is blocked Remove any blockages What if the laundry is not dry enough Possible fault The load contained too many dissimilar items size and fabric What if water has collected around the drum opening Possible fault This is condensed moisture from the laundry 21 After sales service Repairs In the event of a fault which you cannot fix yourself please contact Miele s Technical Service Dept When contacting Technical Service please quote the model and serial number of your appliance They can be found on the data plate located below the drum opening PC Update The indicator on the control panel marked PC allows a technician to update the dryer with new technology For example if new programs or fabrics are developed a service technician will be able to modify the existing program cycles accordingly 22 MieleCare only US MieleCare our Extended Service Contract program gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts Only genuine Miele parts installed by factory trained professionals can guarantee the safety reliability and longevity of your Miele appliance Please note that unless expressly approved in writing by th
22. pipe Several installation possibilities where additionally another washer or dishwasher is connected to 34 Example Connection to a sink standpipe Connect the drain hose with a non return valve directly to a sink standpipe m Remove the accessories from the top rear of the dryer Connector 1 and the hose clamp 3 behind it Installation 1 Connector 2 Sink connecting nut 3 Hose clamp 4 Hose end 5 Non return valve 6 Dryer drain hose m Install the connector 1 with the sink connecting nut 2 to the sink standpipe Usually the sink connection nut is equipped with a washer Please remove the washer m Plug the hose end 4 to the connector 1 m Using a screwdriver tighten the hose clamp 3 directly behind the sink connecting nut Install the non return valve 5 vertical or slightly angled If installed horizontal it will not operate correctly m Connect the non return valve 5 to the dryer drain hose 6 See illustration for the correct direction m Fasten the non return valve with the hose clamps 35 When contacting the Technical Service please quote the model and serial number of your appliance Miele Inc Miele Limited National Headquarters Headquarters and Showroom 9 Independence Way 161 Four Valley Drive Princeton NJ 08540 Vaughan ON L4K 4V8 Phone 800 843 7231 Phone 800 643 5381 609 419 9898 905 660 9936 Fax 609 419 4298 Fax 905 532 2290 www miele com www mi
23. program indicator lights Using the dryer Program Fabric Note Normal Available drying options Turbo Gentle Anti crease Extra Dry Multi layer fabrics mixed loads of The Extra dry program should not be sturdy cottons e g jeans towels selected for jersey materials Items may shrink More Dry Uniform loads of cotton e g sheets z underwear socks Normal Knitted cotton fabrics that may shrink If items are still damp dry again using e g jersey material or lightweight More Dry cottons Less Dry Cotton or linen fabrics to be left damp for ironing Hand Iron eM ne If fabrics are too damp for ironing dry again using Less Dry Rotary Iron Cotton or linen fabrics which will be To prevent moisture loss roll up the ironed with a rotary iron laundry until ironing Wrinkle free Available drying options Turbo Gentle Anti crease More Dry Synthetic permanent press items e g pants and shirts Normal Permanent press and blended fabrics e g cotton synthetic Less Dry Permanent press and blended fabrics Reduce load size for fabrics that wrinkle requiring an ironed finish easily Special Progra ms Available drying options Anti crease only available in Fluff Sturdy Woolens Delicate items which allow machine drying Remove items immediately after the end of the program while still slightly damp Allow items to air dry Smooth Progra
24. revent child hazards Before this appliance is removed for service or discarded remove the door to the drying compartment Do not reach into the dryer if the drum is moving Do not install or store this appliance where it will be exposed to the weather Do not tamper with the controls Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these operating instructions Repairs to electrical appliances should only be performed by qualified personnel Incorrectly repaired machines may pose a considerable risk to the user Do not use fabric softener sheets to eliminate static in this dryer Best results are achieved when a liquid softener is used in the washer Do not use heat to dry articles containing foam rubber or similarly textured rubber like materials or items containing hair spray nail polish remover or similar substances Clean the lint filter before or after each load Keep the area around the air intake toe kick and adjacent surrounding areas free from lint dust and dirt The interior of the machine should be cleaned periodically by qualified personnel Do not place items exposed to oils in your dryer Items contaminated with oils may contribute to a chemical reaction that could cause the laundry to catch fire This dryer is intended for residential use only IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This applianc
25. rie ee nb eee eee 19 Dryer Care 2 00 tees 19 Changing the light bulb 6 eee 19 Frequently asked questions 0 0 00 20 After sales service 0 0 tees 22 Installation instructions 0 0 0 0 eee 23 IMPORTANT SAFETY INSTRUCTIONS 00 02005 24 Caring for the environment 0 0 0 0 c eee 25 Washer Dryer Stack 0 0 00 0 0c eee 26 Electrical connection 0 0 0 00 tees 27 Installation eee 28 Installation Site wc tbe dd Sows dobbs bbb de bead ede iE one 29 Installation beneath a counter ee 30 A Steal AMOUNT OS seers ces Sea ces ae MEA oe oe Roath Mat tiga a E EEEREN 31 Level the dryer 2 2 eee eee 31 External water drain 2 0 eee 32 Installation requirements demanding a non return valve 0 0 00 eee 34 2 IMPORTANT SAFETY INSTRUCTIONS N WARNING To reduce the risk of fire electric shock or injury to persons when using your appliance follow basic precautions including the following Read all instructions before using the appliance Do not dry articles that have been previously cleaned washed soaked or spotted with gasoline dry cleaning solvents or other flammable or explosive substances They may give off vapors that could ignite or explode Do not allow children to play on or in the appliance Close supervision is necessary when the appliance is used near children Always close the door after use to p
26. ut often Removing the condenser The access panel to the condenser is located on the lower left corner of the dryer m Open the access panel with the supplied yellow tool m Remove the panel up and out of the condenser access area m Pull out the condenser Dryer care Rinsing the condenser Returning the Condenser m Put the condenser back in place in the reverse order Check that the gasket around the front of the condenser is flush and not crimped m To prevent leaks make certain the condenser is pushed in all the way and locked in place m Restore power m Rinse the condenser along the left side with warm water m Rinse the condenser from the front with warm water m Check the condenser for visible soiling Rinse the condenser until clean m Place the condenser lengthwise on a towel to air dry 18 Quick Guide Remove this guide for easy reference Please read all instructions especially the Important Safety Instructions before using the dryer Quick Guide 1 Turn on the dryer and load the 2 Select a program laundry Programs mis 0 Off ONormal O Sturdy m Press the On Off button to turn on OWrinkle free O Fluff the dryer OWoolens O20 min Door OSmooth O45 min m Press the Door button to open the _ door V A
Download Pdf Manuals
Related Search