Thinkware X500 drive recorder
Contents
1. LCD Auto Oft 30 sec gt Language Sets language gt Voice Volume Sets the volume level gt LCD Brightness Sets the brightness of the LCD screen gt LCD Auto Off Sets the time for LCD auto shut off L When LCD is off pressing any button will turn the LCD screen back on E Security LED Sets the pattern for security LED gt Time Zone Sets the time zone gt Daylight Saving Time DST Sets the daylight saving time gt Speed Unit Sets the unit for the vehicle speed 26 3 10 About Device About Device A IG Functions O Device Info GPS Info Y Functions Help for device features gt Device Info Information on device and firmware L Factory Reset Restores to factory setting gt GPS Info View GPS information L GPS Initialization Reset GPS 27 4 PC Application 4 1 Thinkware Dash Cam PC Viewer Thinkware Dash Cam Viewer for both Windows MacOSis provided which can be used to watch videos re corded with the dash cam The video files recorded by the dash cam are in one minute segments and the PC viewer allows user to watch the segments as a single continuous video The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card in the package Please check THINKWARE homepage www thinkware com for latest Dash Cam PC Viewer application 4 1 1 Thinkware Dash Cam PC Viewer Software 1 Insert the MicroSD card into the USB MicroSD card reader included in the package with2. gt To manually turn the device on off press and hold the Power button C for 3 seconds 2 2 Road Safety Warning System Using embedded GPS and road data related road safety information will be notified to the driver Alert will be displayed on the LCD screen when approaching nearby points of interest 120 km h 15 5V 2012 12 25 am10 30 Resetting GPS L Built in Internal GPS can be reset by selecting Main Menu gt About Device gt GPS Info gt Reset GPS Cautions O This feature may not be available in some countries O GPS may be affected by weather conditions satellite signal and or surrounding geographical features O Coated windshields can interfere with GPS signal which may result in poor or blocked GPS reception O Other electronic devices and or equipment may interfere with GPS signal if placed too close to the dash cam 10 2 3 Recorded Files gt Recorded video files are saved in the folder by date and hour in the MicroSD card L Files are created based on the time when the videos are recorded REC 2014 04 01 23 3 14 F BH Year Month Day Hour Second Front view Be evt rec Minute recording L manual_rec d motion_rec REC_2014_04_01_23_37_14 R REC 2014 04 01 23 37 14 F MP4 Rear view recording optional rear view cam era must be installed L Asa surveillance product the dash cam will automatically overwrite oldest file in the memory card once t
3. L Type B Optimized for incident and motion detection during parking surveillance L Type C Optimized for continuous and incident recording gt Memory Format Formats the MicroSD card L Formatting will completely erase all video files stored in the memory card Video Overwrite Sets the overwriting option which will allow new video files to overwrite oldest video in storage reserved for each mode Cautions O It is recommended that you back up data before formatting the memory card O Once you format the memory card all data will be deleted and cannot be restored OThe method for formatting a MicroSD card might vary depending on the computer operating system 21 3 5 Dual Save Videos gt Dual Save Videos A Videos 16 Copy to SD Copy Delete All Delete Videos View Dual Save video list gt Copy to SD Copy all videos saved on the internal memory to MicroSD card gt Delete All Delete all videos saved on the internal memory 22 3 6 Settings gt Camera Settings Camera settings Brightness F Mid E Brightness R Mid hd Wide Dynamic Range ON gt Brightness F R Sets the video recording brightness for front rear camera Wide Dynamic Range Sets the WDR mode to record clear video even under large variation of backlightingillumination 23 3 7 Settings gt Continuous Recording Settings Cont settings a Impact Sens Mid Road Safety Warnin ON hd gt Impact Sensitivity
4. Sets the impact sensitivity level gt Road Safety Warnin Sets audible notifications for road safety warnings Cautions O Tips on sensitivity It is recommended that you set the sensitivity according to vehicle type High sensitivity setting is rec ommended for cars with softer ride such as luxury sedans while low sensitivity setting is recommended for cars such as performance cars trucks or SUVs which tends to have stiffer suspension settings 24 3 8 Settings gt Parking Recording Settings Parking Settings Use Park Mode Impact Sens Motion Sens Off Timer Use Parking Mode Monitors vehicle ignition status to automatically convert to parking mode when the vehicle engine is turned off gt Impact Sensitivity Sets the impact sensitivity during parking recording mode gt Motion Detection Sensitivity Sets the motion detection sensitivity during parking recording mode gt Off Timer Sets the timer for the dash cam to automatically shut down in parking mode to prevent from draining the vehicle battery Off Voltage Sets the voltage level for the dash cam to automatically shut down in order to prevent from draining the vehicle battery Cautions O It is recommended to format the memory card when settings have been changed O Backup important video files before formatting the memory card 25 3 9 Settings gt System Settings System Settings Language English Voice Volume 2 3 LCD Brightness Mid
5. device may not func tion as designed and at extreme temperatures permanent physical damage can result which is not covered by warranty Avoid placing the device under direct sunlight lt gt Avoid using the Product in extreme conditions where the Product is exposed to high tempera ture and or humidity Only use genuine accessories and peripherals from THINKWARE or authorized THINKWARE deal er THINKWARE does not warrant the safety and compatibility from use of peripherals from oth er manufacturers Use genuine parts supplied by THINKWARE Do not apply excessive force when pushing the buttons on the device Do not clean the Product using chemical cleaner or solvents as it may damage plastic components Use soft clean dry fabric to gently wipe the Prod uct Do not place or store the device where it can be accessible by children and pets Do not disassemble the Product as it will void product warranty and may also damage the prod uct Handle with care Drop shock and mishandling of the Product may result in malfunction and or damage to the device Do not operate this device while driving lt gt Install this device in a location where it has unob structed view of the road but does not interfere with the driver s view Check with your local and regional laws before mounting to windshield The device and or installation parts have moving parts and may shift in extreme road conditions such as unpaved road
6. i Optional hardwiring cable and installa Parking Surveillance Mode i tion are required for continuous supply of power when vehicle ignition is off Is ee ae Audio Recording Camera 2 0 Megapixel 1 2 9 CMOS Same for rear camera Viewing angle Approximately 144 diagonally Same for rear camera Video ae Same for rear camera 1920 x 1080 H 264 extension MP4 Frame rate 1 channel Front view up to 30 fps Same for rear camera Audio PCM Pulse code modulation Acceleration sensor 3 axis acceleration sensor 3D 3G Adjustable impact sensitivity 5 levels L Rea aes Support V IN port Optional accessory that requires separate purchase GPS Embedded GPS Input power source DC 12 24V Rearview camera DC 3 3V 11 cs i i i i E i oe ee i oro v roan er err se ein Se ia ee ee ie se ie 6 a ee ee ee ee ee ee pee eee ee ee ee ee ee ee ee ee ee ee ee es ee eee ee ee ee ee ee ee ee eee ee ee eee ee eee LCD off i Auxiliary power unit Super Capacitor 0 _ Warning sound Embeddedspeaker Voice buzzer sound guidance Operation Storage 20 C to 65 C 40 C to80 C Temperature 4 F to 149 F 40 F to 176 F a a a aa n mon nenes Connection Interface 1 x V IN port Micro USB 33
7. the device off completely before removing the MicroSD card to avoid damages to the memory card O To prevent loss of important data frequently copy recorded videos from MicroSD card to another storage device such as personal computer for back up 1 5 Vehicle Installation ee eB Be BY 1 5 1 Connecting the Device and the a Mount 3 1 Place the mount so it is aligned with the connector A and push it toward B until it clicks into place 2 Remove the protective film from the camera lens THINKWARE mmm A 1 5 2 Installing the Device 1 Clean the area on the windshield where the dash cam will be installed With dash cam main unit still attached to the mount remove the protective tape from the back of the mount Attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver s view The camera is located on the left side of the main unit so install the dash cam on the right of center behind the rearview mirror To ensure that the mount is safely secured it is recommend ed that you separate the device from the mount after instal lation and press the mount towards windshield for 5 minutes to maintain pressure Allow 24 hours until the adhesive on the mount has set before connecting the dash cam 1 5 3 Connecting to power 1 Connect the power cable to DC IN socket of the
8. Check frequently to ensure the device is positioned as instructed in this guide Do not operate or handle power cable with wet hands Do not use a damaged power cable lt gt Keep the power cable away from heaters or other hot objects Check that power cable with correct connector is used and the connections are secure and firmly in place lt gt Do not pull insert or bend the power cable using excessive force Do not place heavy objects on the device and the power cable Do not modify or cut the power cable lt THINKWARE does not guarantee that devices or peripherals not authorized by THINKWARE will be compatible with its Product Do not attempt to insert foreign objects into the device or power cable lt gt Do not spill or spray liquid into the device as it may cause malfunction fire or electric shock gt This device is intended to be used inside the ve hicle only 1 Getting Started This unit was tested with shielded cables on the peripheral devices Shielded cables must be used with the unit to insure compliance 1 1 In the Package amp L O catania Mount with 3M tape Adhesive Cable Holder Car Charger 3 1ea Sea Main Dash Cam Unit a a i i n K a i n ii n i i i ee iii iii a il a G a ai a MicroSD memory card with adapter USB MicroSD card Quick Start Guide Warranty consumable reader User Manual stored in the MicroSD card 1 2 Optional Acces
9. SIA 10 11 12 14 15 16 16 17 18 19 21 22 23 24 25 26 27 28 33 Before Using THINKWARE DASH CAM X500 Under the copyright laws this manual may not be copied in whole or in part without the written consent of THINKWARE Every effort has been made to ensure this Guide s accuracy However we cannot guarantee the accuracy of the contents in this document as there may be technical errors omissions and or futures changes K THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements gt Images contained in this user guide are illustrations for instructional purposes only and may differ from the actual product gt Users do not reserve the right to use the product for purposes other than as specified in this user guide According to the Personal Information Protection Act and other related regulations the user owner may be held liable if the video and or conversation recorded by the device are distributed without their con sent Thus special attention should be paid in using this product The MicroSD memory card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically THINKWARE shall NOT be responsible for any problems and or damages that may occur from the use of disingenuous modified or unauthorizedparts and accessories The devi
10. THINKWARE DASH CAM X500 User Manual C RoHS This Dashboard Camera dash cam is a specialized onboard device that continuously records video while the vehicle is in use Some features may not be available depending on installation driving conditions and vehicle type The video quality might vary for each device as a result of installed firmware The device DOES NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combina tion of user settings and the level of impact during the collision Before Using THINKWARE DASH CAM X500 FCC Statement Caution 01 Getting Started 1 1 In the Package 1 2 Optional Accessories 1 3 Product Overview 1 4 Inserting a Memory Card 1 5 Vehicle Installation 02 Basic Operations 2 1 Turning the Device Power On Off 2 2 Road Safety Warning System 2 3 Recorded Files 2 4 Recording Videos While Driving 2 5 Optional Recording Videos While Parked 2 6 Manual Recording 2 7 Formatting MicroSD Card 2 8 Upgrading Firmware 03 LCD Display 3 1 Main Menu 3 2 Live View 3 3 File List 3 4 Memory Card Settings 3 5 Dual Save Videos 3 6 Settings gt Camera Settings 3 7 Settings gt Continuous Recording Settings 3 8 Settings gt Parking Recording Settings 3 9 Settings gt System Settings 3 10 About Device 04 PC Application 4 1 Thinkware Dash Cam PC Viewer 05 Product Specifications 5 1 Specifications UW N NOM
11. between the equipment and receiver K Connect the equipment into an outlet on a circuit different from that to which the receiver is connected K Consult the dealer or an experienced radio TV technician for help FCC CAUTION Any changes or modifications to the equipment not expressly approved by the party responsi ble for compliance could void your authority to operate the equipment This Class A digital apparatus complies with Canadian ICES 003 2 Caution lt gt This device is designed to record video while the vehicle is in operation The quality of the video might be affected by weather conditions and the road environment such as day or night presence of street lighting entering exiting tunnels and surrounding temperatures THINKWARE is NOT responsible for the loss of any recorded video during operation Although designed to withstand high impact of car collision THINKWARE does NOT guarantee re cording of accidents where the impact may cause the device to be damaged Keep the windshield clean for optimal video qual ity If a foreign substance e g fingerprints is attached to the lens this might reduce the quality of the recorded videos Keep the lens clean all the time lt gt The specified operating temperature of this prod uct is 20 C to 65 C 4 F to 149 F and storage temperature is 40 C to 80 C 40 F to 176 F En sure that the device is kept within these tempera ture ranges otherwise the
12. ce and the recorded videos are intended for personal use and the recorded videos should be used for reference only The device does NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combination of user settings and the level of impact during the collision DTT FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful inter ference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures gt Reorient or relocate the receiving antenna K Increase the separation
13. device Plug the charger adapter end of the power cable into a 12V DC vehicle power socket Arrange the wire by using the adhesive cable holder as shown below 4 Adjust the camera so that the dash cam is facing forward and level with the road After installation turn on the dash cam and use the live view on the LCD screen to adjust the camera angle Hide the power cable by placing tucking A it in the space between the vehicle ceiling Recommended locations for and headliner at the top of the windshield attaching adhesive wires clips to arrange the power cable are illustrated in the diagram For more information on the power cable routing instruction please visit Thinkware homepage www thinkware com Preventing Vehicle Battery Discharge E Depending on the car make and model the power from the vehicle can be supplied even with the ignition turned off In this case the dash cam stays on as continuous mode and does not enter parking surveillance mode which will result in vehicle battery discharge m Some vehicles with multiple power sockets might be equipped with at least 1 outlet that does not shut off the power with the ignition So test each power outlet to ensure you connect to an outlet that shut off with vehicle ignition 2 Basic Operations 2 1 Turning the Device Power On Off gt The device will automatically turn on and off with vehicle ignition 6 Power cable for vehicle
14. egments gt Incident Continuous Lists incident recording videos during continuous mode Motion Detection Lists motion detection recording videos during parking surveillance mode gt Parking Incident Lists incident recording videos during parking surveillance mode gt Manual Recording Lists manual recording videos initiated by selecting button Cautions OThe configured storage capacity may be different from the actual capacity by approximately 30 to 40MB 19 3 3 2 File List 2 Continuous 24 videos REC_2014_05_27_17_29_09_F MP4 REC_2014_05_19_13_16_01_F MP4 CEUTA _U5_19_15_16_UI_ LA Recording will stop when accessing on screen menu REC_2014 05 09 13 15 53 EMP4 y REC_2014_05_05_16_29 21 F MP4 O OST LL h M 2 g LAL M EEE M R L RER R A ee EH MAM R A ML I U A da DEL YO Moria Videofilename Current Video playback play time progress bar RA gt Y N a Switch to front rear view II a Enter zoom view Mute on off Play Pause Next Previous 7 Po AP Video playback with 3X zoom a Fa N EJES AR T Directional button Exit zoom view 20 3 4 Memory Card Settings Mem Card Settings Memory Partition Type A dl Memory Format Format Y Video Overwrite setting gt Memory Partition Sets how storage space on the memory card will be allotted for each recording mode L Type A recommended Optimized for continuous recording
15. front side facing up as shown in the illustration 2 Connect the USB MicroSD card reader to the PC Ensure that the USB card reader is correctly oriented when inserting to USB drive on the PC 28 4 1 2 Installing Thinkware Dash Cam Viewer 1 Double click the Thinkware Dash Cam Viewer setup file saved in the MicroSD card to initiate program O installation DASHCAM PC VIEWER is successfully i s y installed Double click the application icon once PC Viewer RE AR IA installation completes and the application main screen will then appear Cautions O System requirements ces Windows XP 32bit Windows 7 32bit 64bit Windows 8 x 32bit 64bit 1 Move the file named Dashcam Viewer zip stored in the MicroSD card to the desktop Right click on the mouse and select Open With gt Archive Utility to launch the Thinkware Dash Cam viewer application Dashi Open With Viewer l Move to Trash l Get Info Burn Dashcam Viewer_140413 zip to Disc Duplicate Make Alias Quick Look Dashcam Viewer_140413 zip Share Copy Dashcam Viewer_140413 zip Clean Up Selection Show View Options Tags 00000900 Cautions O System requirements MAC OS X 10 8 Mountain Lion or later OS X 10 9 Mavericks OS X 10 10 Yosemite 29 4 1 3 Select the Device Drive for X500 7 Click File W from menu and select the drive for the po
16. he memory is full However event recording and manual recording videos are stored in separate location and will be protected from file overwriting Cautions O Do not use MicroSD as external storage device O Do not save or modify saved files in the MicroSD card This may result in unexpected behavior during operation 11 2 4 Recording Videos While Driving 2 4 1 Continuous Recording Mode gt Videos are recorded in 1 minute segments and saves as files in the MicroSD card under folder named Cont rec 2 4 2 Incident Recording in During Continuous Recording Mode gt When the dash cam detects impact it will immediately store the previous 10 seconds prior to impact and start recording video for next 10 seconds This 20 second video will then be saved in a secure location on the MicroSD card under folder named evt_rec Note that the dash cam will detect impact as incident only if the level of impact is greater than the sensitivity of the G sensor set in the user configuration Cautions O Driving over speed bump manhole or uneven road at high speed can also be detected as incident O The device can record up to 1 minute if there are continuous impacts in case of multiple accidents O The time for which the device records video before and after impact can vary according to the device setting 12 2 4 3 Dual Save Internal Memory Backup Dual Save is a Thinkware proprietary technology
17. icroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 2 8 Upgrading Firmware gt The system will automatically be updated if the MicroSD card contains the firmware upgrade file L The device restarts automatically after the upgrade has been completed gt Make sure your device is always up to date with latest firmware Please check back frequently at THINK WARE website www thinkware com for latest firmware updates 16 3 LCD Screen 3 1 Main Menu Recording status Change to Live View GPS status px i PM00 00 in Data Time 0000 00 00 File List Mem Card Settings Dual Save Videos Directional Keys Select 17 3 2 Live View LCD screen can be used to verify current recording view Switch to Front Rearview camera appears only when Rear view Back to main menu rearview camera is connected 43040938 TVLISIC Lal ERS ER tora 2012 12 25 aml0 30 THINKWARE DASH CAM X500 Audio recording status Manual recording Current speed Voltage status 18 3 3 File List Recording will suspend when browsing through video list and settings menu Visual notification will appear on the screen to confirm the suspension of recording prior to entering the menu 3 3 1 File List 1 File LISt Continuous Incident Continuous dai Motion Detection fem Parking Incident gt Continuous Lists loop recording videos during continuous mode in 1 minute s
18. on to recording accidents the dash cam allows the user to initiate manual recording mode to cap ture scenery and or places while driving This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident Video files saved during manually recording mode are stored in a separate location on the memory card and will be protected from video overwriting in continuous recording mode gt Briefly press the REC button to start recording The de vice will record video for 1 minute 10 seconds before and 50 seconds after as of the time when the button is pressed The recorded video will be saved under the manual_rec folder Note that when manual recording is initiated the previous 10 seconds prior to pressing the button will be saved so even if you just missed a scene you can still capture and safely store the video by initiating manual record within 10 seconds of the event di capture Li cont rec E dualsave motion_rec i H marlima rar Na e cc a a ul a a is E Cautions O When the allocated storage for manual recording videos is full oldest video file will be replaced by the new recorded video 15 2 7 Formatting MicroSD Card Select Memory Card Format menu located at Mem Card Settings gt n Mem Card Settings Memory Format Memory Partition TypeA Memory Format Format Video Overwrite Setting Cautions OThe M
19. rear view camera Optional rear view camera is not included and requires separate purchase 1 4 Inserting a Memory Card 1 4 1 About Memory Cards K UHS MicroSD card must be used with a storage capacity of 16GB 32GB or 64GB It is strongly recommended that minimum 16GB memory card is used for full HD recording The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 1 4 2 Installing a MicroSD Card Open the slot cover and insert the MicroSD card into the slot with the metal contacts facing up toward the mount connector and push until it locks into place lt a Inserting the memory card gt Removing the memory card Press the end of MicroSD card until it clicks out from the slot Pull out the MicroSD card and close the slot cover MicroSD card gt Device only supports MicroSDUHS I card with capacity of 16GB or higher Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may cause damage the MicroSD card and the card slot Cautions OThe MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically O THINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories It is strongly recommended that THINKWARE memory card is used to minimize memory card error O Turn
20. rtable storage drive for the connected MicroSD card Select any file from the list to load entire video play list in the memory card Cautions _ OThe MicroSD card will not be recognized by the software until it has been initialized in the dash cam O It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer 30 4 1 4 Thinkware Dash Cam Viewer Overview Full screen Dash cam setting Information Switch between front rear view PC Viewer File open y Front x Rear view Enabled only if Mi Da vev Map Satelite croSD card contains i use Da A video captured Viewing screen zag n N DTA A SOS camera sous C Google 2 a aE 82017 5K planet a a M a p o nts Checks the location E Play List Playback l a ni nen of the recorded Progress video Enabled only if video is captured while connected using GPS antenna optional in some models and also Current play time Total play time Driving speed pe 000 K EESE must be connected Emin EC_2014_04_02_ 20 410 MPA 115 800 to Internet 4_02_20 94 _42_0 MP4 115 71mb Ver 1 2 1 00 Playlist Impact sensor value I lt Play Previous Plays the previous file before the current file ms ERRER ese L K H Play Pause Plays the recorded file temporarily pauses playback S Stop Stops the file being played The playback status reset
21. s to the starting point of the video p gt Fastforwardby10Sec Lac it continues to fast forward by 0 seconds a Play Next Plays the next file after the current file ca ia AutoPlay Automatically loops the video back to beginning once the end has reached E O Zoom _ Sets the video expansion ratio 0 5x 1 0x 1 5x 20x E 6 ScreenSetting Setsbrightness speedofthevideo SS E Save Saves the video in play L dE Volume Setsthevolumeoftheplaybak 31 4 1 5 View Video Playlist Select appropriate folder Continuous Recording Incident Recording Manual Recording Parking Motion Parking Incident to see the playlist for each recording mode PC Viewer vev Map Satellite H L asa AB Msa data 92013 5K planet Terms ef Use 000 ILA y iii LOnNTINUOUS Manual y REC_ P 115 88mb E JN REC_ D1 q 04 02 20 33 36D MP4 115 86mb MAN 2012 DUS 28 16 15 25 5 MP4 l a REC 2014_04_02_20_34_37_0 MP4 115 58mb REG_2014_04_02_20_35_37_D MP4 115 69mb REG_2014_04_02_20_36_30_D MP4 115 90mb REC_2014_04_02_20_57_30_0 MP4 115 85mb REC_2014_04_02_20_ MP4 115 95mb REC_2014_04_0 _20_59_39_ 0 MP4 115 56mb REC_2014_04_02_20_40_40 0 MP4 115 56mb Fe 2014 dA 02 20 41 40 0 haba 118 Gimb Manual Recording Playlist a S P K T a e i ii e a 9 e i T 32 5 Specifications 5 1 Specifications The specifications of this product may change without prior notice for product improvements Standard Recording mode
22. sories ist cS Ca ne hi tc Ce rg i et eS ec Ce es Catt hee Vin re Hardwiring Cable Rear View Camera 1 3 Product Overview Camera Lens Description Front facing camera for video recording A iii iii vini B PPT TTT TT TZ e e e e e e e e e e 2 eee e e ees eee a PzP2NS _SPZSZIZ e e H en LED light that is used to visually indicate that the vehicle is equipped with dash cam which is in operation re aa PO Dg TZ T _FTF ZP PE 2 2 K K K m e e K e nn e K e e m e e K e e m m K e K e e m e K SY YS 2 YZ SPP2PT IZ 22YYZ TC R RR R R R R eee III e e e e e a e e e e e e e e e e r e e e e e en eee e n e n n e e n e e nse e n n n n e I e n e e e e K e e e e e e e e e e e e e e e e o e e e e e e n n n R n n R n n R R n e A nn A e e e r e c r e e c r r e e e r e e e e r e cr e c e e eC rr rr CI e e e r e e K e e e e e e o e e e e e e e e e e o e e e e e e e R n e R n n n n e e n R K e n e III AA H e e e e e e K r e e e e e K e e e e e e e e o e e e e e e e K n n n R e n e III e e e e e e c e e e e e e e r e e r e e e e e r e e c e r ri CET e e e r e e e K r e e e e o K r e e e e e e o e e e e e R R R n n e n e V IN Socket Connects to
23. that utilizes built in memory as secure backup in addition to the MicroSD memory card Dual Save technology guarantees incident video recording using internal memory in case of an accident that causes damage to the MicroSD memory card L In addition to saving incident video files to MicroSD card at the time of the accident Dual save stores an other backup copy onto the built in internal memory in case there has been a damage to either the main unit or the MicroSD card that might result in failure to save incident videos on the external memory L When Dual Save is activated it will immediately store the previous 4 seconds prior to impact and start recording video for next 2 seconds for total of 6 second video clip L View Dual Save Video Files Video recorded and stored on the internal backup memory through Dual Save technology can be gt Dual Save Videos viewed in the list located at Dual Save Videos gt Videos Videos Copy to SD Copy y Delete All Delete L Copy Dual Save Video Files Video recorded and stored on the internal backup memory through Dual Save technology can be copied to MicroSD card using copy menu located at a Videos Dual Save Videos gt Copy to SD Ensure that a MicroSD card is present in the device Delete All Delete Dual Save Videos Cautions O Dual Save technology saves duplicate copy of the recorded video as secure backup to the internal memo ry so the internal memory life soan may be affected b
24. y G sensor user setting road conditions and driving behavior which directly impact the frequency of incident recordings O Driving over speed bump manhole or uneven road at high speed can also be detected as incident O Professional product service is required for replacing internal memory 13 2 5 Optional Recording Videos While Parked This feature is available only when the dash cam has been hardwired directly to the vehicle battery Separate purchase for the hardwiring cable accessory and professional installation is required 2 5 1 Incident Recording gt When the dash cam detects impact while parked it will imme diately store the previous 10 seconds prior to impact and start recording video for next 10 seconds which is then saved in a secure location on the MicroSD card under folder named parking_rec 2 5 2 Motion Detection Recording The dash cam and optional rear view camera are both equipped with motion detectors which are used to detect motion that initiates video recording while the vehicle is parked gt When the dash cam detects impact while parked it will immediately store the previous 10 seconds prior to impact and start recording video for next 10 seconds which is then saved in a secure location on the MicroSD card under folder named motion fec Cautions O The device can record up to 1 minute for continuous impacts in case of multiple collisions 14 2 6 Manual Recording In additi
Download Pdf Manuals
Related Search