Philips 3000 series LED TV 42PFL3457
Contents
1. INFO MUTE SOURCE SLEEP w PICTURE O SOUND d POWER Turns TV into STANDBY ON OFF mode INFO Displays present source information with details of input signal connected MUTE Turns sound OFF or ON SOURCE Press SOURCE key on remote or key on front panel keypad A source OSD will appear to select a source press OK Right key on the remote or VOL key from front panel Press source key repeatedly to change and select source Up Down key on the remote or CH on front panel can be used to changed sources SLEEP Sets sleep timer Maximum time can be set 120 minutes in steps of 10 20 30 40 50 60 90 120 minutes NOTE 1 Sleep Timer is deactivated when set is switch to stand by or mains power supply is switched Off 2 Use Blue key to delete channel from channel edit list PICTURE Recalls presetted picture settings can be selected PERSONAL CINEMA SPORTS VIVID BRIGHT SOUND Recalls presetted sound settings can be selected PERSONAL NEWS STANDARD MUSIC DIRECT DIGIT NUMBER SELECTION Keys 0 to 9 Selects program number 1 200 directly by using direct digit keys To select 1 digit program number press desired program number amp wait for few seconds selected program number will appears on screen To select 2 digit or 3 digit program number press 1st 2nd or 3rd digit within 2 sec after pressing 1 amp 2 digit respectively To enter password to lock or unlock channel and2. OK Right key on remote to enter into the submenu 4 Press Ch or Vol key on front panel to navigate Source key to enter into sub menu and to return back by vol 5 Default password is 0000 for child lock and hotel mode 5 5 Installation Menu Program Number Display the program Channel number of the current channel Skip Make this switch On to skip the selected channel the skipped channel can be viewed by entering channel number Select the favorite On Off To give the channel name press Ok on this option and use Up Down and Left Right key to navigate through OSD and press Ok to select a particular character or option Change the color system AUTO PAL SECAM setting if Color System picture is not reproduced properly INSTALLATION Note For INDIA Color system is AUTO or PAL Change the sound system BG I DK setting if sound is not Sound System reproduced properly Note For INDIA Sound system is BG Channel Select this function TV set will start auto tuning for al Installation available channels Select this function for Manual Searching the channels select Manual channel number in PR start on for which user wants manual Installation search Strat from the frequency from which the tunning will start Start search press OK to start manual tunning User can Edit Channel by following operation Press OK to open Edit menu in channel edit menu To swap Navigate to a channel to be Swapped press Red Demo button a
3. can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weights more than 25 kg wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount PE Electronics Ltd bears no responsibilityfor improper wall mounting that result inaccident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by acloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating e Never install the TV in aconfinedspace Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of damage to the TV e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury fire or power cord damage e Never place the TV or any objects on the power c
4. to set New Password BACK A CH Toggles between current amp last viewed channel In USB mode use this key to exit from images thumbnail mode and come back to previous folder FORMAT Selects a picture format Not Applicable in USB CH CH Navigate Up Down through the valid channel l To increase decrease the volume Navigates vertically up down through the Menu Sub menu Used to set Program name Used to sorting purpose in Program edit menu To enter into displayed Menu Sub menu parameters Select submenu from displayed menu Select Up Down Text page in USB mode Increase Decrease the value of selected items Select characters in program name and time in time menu Adjust setting of selected item and set feature to ON OFF Adjust Channel number in tuning Select Prev Next text file in USB mode OK Used to enter selected MENU items Optional f MENU To Select menu OSD window and to exist from menu OSD window when menu window is displayed on screen STOP PLAY PAUSE FR FAST REVERSE FR key is used for backward the playing track item by the speed of X2 X4 X8 X16 X32 FF FAST FORWARD FF key is used for forward the playing track item by the speed of X2 X4 X8 X16 X32 STOP Press this key to stop the playback and press OK to resume the playback To view images as thumbnail this key can be used PLAY PAUSE Press this key to play or pause track item in USB source To free
5. 0 Hz 1280 x 720p 60Hz 1920 x 1080i 50Hz 60Hz 1920 x 1080p 50Hz 60Hz Computer formats VGA e Resolution refresh rate 640 x 480 60Hz 72Hz 75Hz 800 x 600 56Hz 60Hz 72Hz 75 Hz 1024 x 768 60Hz 70Hz 75Hz 1280 x 768 60Hz 1600 x 1200 60Hz Y Pb Pr e Resolution refresh rate e 720 x 480i 60Hz 720 x 480p 60Hz 720 x 576i 50Hz 720 x 576p 60Hz 1280 x 720p 50Hz 1280 x 720p 60Hz 1920 x 1080i 50Hz 1920 x 1080i 60Hz 1920 x 1080p 50Hz 1920 x 1080p 60Hz Note Resolution would depend on model USB e Supported USB storage device Only FAT 16 or FAT 32 USB storage devices are supported e Supported storage file formats e Images JPEG BMP PNG e Audio MP3 WMA e Video File Extention Video Decoder H 264 mp4 MP4 MPEG 4 mov H 264 avi mkv MKV MPEG 4 Peel Note 1 USB file names must not exceed 128 characters 2 The USB features functions may vary from file to file depending on relative information present in the file Tuner Reception Transmission e Antenna input 750hm e TV system PAL e Video playback PAL NTSC Remote control e Batteries 2 x AAA Power e Mains power AC 110 240 V 50 60 Hz e Standby power lt 1 W e Ambient temperature 5 to 40 degrees Celsius EN 20 Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables a
6. Register your product and get support at www philips com welcome 42PFL3457 V7 32PFL3057 V7 EN User manual PHILIPS Contents 1 Notice 2 2 Important 3 3 Antenna and External 5 Equipment connection 4 Use your TV 7 4 1 Name and Function of Control on Set 7 4 2 Name and Function of Control on Remote 8 4 3 Battery Installation 11 5 Use more of your TV 12 5 1 Access TV menus 12 5 2 Picture Menu 12 5 3 Sound Menu 13 5 6 Features Menu 13 5 5 Installation Menu 14 5 4 Parental Menu 15 6 Play photos music and videos 16 on USB storage devices 7 Troubleshooting 19 8 Product information Supported display resolutions USB Tuner Reception Transmission Remote control Power Supported TV mounts Product Specification EN 20 20 20 20 20 20 21 21 1 Notice Pixel characteristics This LCD LED product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction 2 EN Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in
7. amage or loss of data from the device Connect a USB storage device to play photos music or videos stored on it 1 Switch onthe TV 2 Connect the USB device to the USB port on the side of your TV 3 Press f 4 Select Browse USB then press OK The USB browser appears View photos 1 Inthe USB browser select Photo or in MENU select View Photos 2 Select a photo or a photo album then press OK to view the photo enlarged to fill the TV screen e To view the next or previous photo press lt gt 3 Press the following buttons to control play gt to play Ito pause or P to play the previous or next photo to stop or Exit Change slide show settings While you view a slide show press fi The slide show options menu is displayed Select one of the following then press OK Play Pause Play or Pause the slideshow Repeat Play photos once current file repeatedly or folder repeatedly Shuffle on Shuffle off Play in sequence or at random Slideshow frequency Select the options Short Medium Long Slideshow transitions Set the transition from one picture to the next Show info Display the picture name date size and next picture in the slide show EN 16 Listen to music 1 Inthe USB browser select MUSIC or in MENU select Listen Music then then press OK 2 Select a music track or album then press OK to pla
8. d however be restricted within the municipal limits of the city town in which the set has been registered Type no Serial No _________ __ _ ____ Date of Purchase Purchased By Name Address Tel No Sold by Name Address Tel No PHILIPS Sold by User rubber stamp Model no 42PFL3457 V7 32PFL3057 V7 Serial no E MADE IN INDIA Contact Customer Service Executive at 1860 180 1111 Standard Call Rates Apply 1800 102 2929 Toll free No Regd Office PE Electronics Ltd Auto Cars Compound Adalat Road Aurangabad 431005 WARRANTY This TV receiver is covered under warranty against any defect arising out of faulty or defective material or workman ship for a period of 12 months from the date of purchase Should a defect develop in this set during the period of warranty PE Electronics Limited undertakes to get the set repaired free of charge either From whom the set has been purchased or through an Authorised Service Center for warranty service However if the Purchaser has to shift his residence to another town on account of transfer or other reasons the warranty benefit will be available at the Authorised Service Center of that town The warranty is not valid in case of any of the following events The TV set is not used according to instructions given in the Direction for use User Manual Defects are caused by improper or reckless use Any repair w
9. d to select source Press OK Right key on the remote or VOL key from front panel to enter selected source or press SOURCE key repeatedly to change and select source Press TV key on the remote to enter into TV source from any other source except USB source EN 5 HDMI R L V DVD PLAYER COMPONENT DVD HDMI NOTE VGA INPUT 1 Connect the VGA cable from the monitor output socket of the PC to the VGAIN socket of the TV 2 Connect the audio cable from the PC to the VGA AUDIO IN ofthe set 3 Switch on the PC and PC screen appears on the set The set can be operated as PC monitor NOTE A If the set is cold there may be a small flicker when the set is switched on This is normal there is nothing wrong with the set B Some dot defects may appear on the screen like Red Green or Blue spots However this will have no impact or effect on the TV Monitor performance HDMI INPUT 1 Connect the HDMI High Definition Multimedia Interface cable from the DVD HDMI output socket to the HDMI socket HDMI1 HDMI2 HDMI3 on the TV 2 Set HDMI mode in DVD Refer User Manual of DVD NOTE TV can receive the Video and Audio Signal simultaneously by using HDMI cable USB Connect Insert standard USB and select USB source on source OSD by pressing SOURCE key Press OK Right key on remote connected USB is Listed press OK to enter in selected USB Similarly front panel keys CH and VOL can be op
10. eck the following points PROBLEM CHECK ITEM No picture on screen and Insert the AC power cord plug securely in AC power socket no sound from speakers e Make sure the set is not in the standby mode e Turn on the power button on the set No picture from AV terminal e Check the brightness setting of the set Lamp may have malfunction e Make sure a cable with video input signal is connected to the AV S VIDEO INPUT terminal Picture is displayed but no e Check the volume settings sound from speakers e Make sure that sound is not muted e Make sure that sound system is correct Picture is too light e Make Sure COLOR and CONTRAST setting are correct Picture is too dark e Make sure BRIGHTNESS setting is not set too low Check BRIGHTNESS setting e Lamp may have malfunction Remote control does not work Change the batteries e Make sure the infrared transmitter window is not receiving strong light such as light from fluorescent lamps The picture is not sharp The e The reception may be weak try another channel picture moves Picture is e The state of broadcast may also be bad snowy and noisy sound e Make sure that the antenna is facing the right direction e Make sure the outside antenna is not disconnected The Multiple image and normal Try different channel if ok probably it is a station problem sound e Make sure the antenna is facing the right direction e There may be reflected electric waves from mountain
11. erated as Up Down and OK Right keys on remote respectively 1 CH CH keys on remote are represented by CH on TV set VOL VOL keys on remote are represented by on TV set 6 EN 4 Name and Function of Control on Set A Front Panel Control Keys Optional O 0 a O 1 LED INDICATOR 13 HDMI 2 22 RIN1 2 IR SENSOR 14 HDMI 1 23 VIN1 3 STAND BY 15 VGA IN 24 AV OUT 4 SOURCE TV AV 16 Y1 25 R2 IN 5 MENU 17 Pb1 26 L2 IN 6 CH 18 Pri 27 AV2 IN 7 CH 19 VGA AUDIO IN 28 Pr2 Optional 8 VOL 20 ANT IN 29 Pb2 Optional 9 VOL 21 LIN1 30 Y2 Optional 10 AC POWER IN 11 USB janne n 5 12 HDMI 3 Pr2 R2 3 Pee L2 2 i B Connecting your Unit Oo OQ r 6 z i F ds t e D 0 gt O 6 I 2 D f KOE DENIE o ORIRE O DRE Note 1 Above Sketches are just representation Actual TV set may look different than these sketches EN 7 4 2 Name and Function of Control on Remote INCR SURR TELETEXT SOURCE DEMO SCENEA DUAL Mi SLEEP w a G CJ CJ o GJ CJ GI CJI CJ Ce SOUND PICTURE PHILIPS w NOTE This is for representation actual remote may differ
12. gain navigate to another channe Channel Edit press OK then these two channels are swapped To Insert Navigate to a channel to be Inserted Press Green Scenea button Again navigate to channel location where you want to insert Press OK then Selected channel will be Inserted here To Copy Navigate to a channel to be Copied Press Yellow DUAL I II button again navigate to another channel Press OK then Selected channel will be copied here To Delete Navigate to a channel to be Deleted Press blue key the channel will be deleted Fine Tuning Select this option for Fine tunning the channel at which either Picture or Sound is not clear even after channel installation Program Name 14 EN 5 6 Parental Menu Parent Child Lock Make the parent Child switch On to lock the source channel Switch Note Setup menu is disabled when parental switch is On Channel Block Select the channels 1 200 to be locked and press OK to set clear lock Select the Input sources to be locked with up down key on Child Lock Input Source Bloc remote and press OK to set clear lock Select this option to change the password default 0000 Change Password enter new password and confirm the same Clear All Reset the Child Lock option to default value Make this switch On to Activate the Hotel Mode Hotel Mode Control options selected by User When Switch is Off the Hotel Mode options will not Operate Change Password Select this option to chan
13. ge the password default 0000 enter new password and confirm the same r Making this option On the Display OSD OSD Display Disable will not be displayed by Info Key Menu Disable Select this option On the SETUP menu will not be displayed Hotel Mode Key Pad Lock Select this option On all the panel keypad will not operate Control Making this option On the search options SETUP men aking this option On ri i u Disable Search will be disabled for user Max Volume The main volume is limited by setting MAX volume User cannot increase the main volume greater than MAX volume selected Power On volume When the TV is switched ON the Power ON volume will be same as your last selection Source When the TV is switched ON the Power ON source will be same as your last selection When the TV is switched ON the Power ON Channel will be same as your last selection Power On Channel will be disabled when source is changed Clear All Reset the Hotel Mode options to default value PARENTAL Power On Channel EN 15 6 Play photos music amp videos on USB storage devices Video file format supported by USB devices Supported storage devices USB for FAT or FAT 32 format only Supported USB file format Image JPEG BMP PNG Audio MP3 WMA e Video MP4 mpg mpeg MPEG 1 2 Caution PE Electronics Ltd is not responsible if the USB storage device is not supported nor is it responsible for d
14. h quality materials and components which can be recycled and reused 3 Antenna and External Equipment Connection You can connect antenna external equipment such as VCR DVD player and PC to your set Examples are shown below Y1 Pbl Pri L1 var R1 Avl 000 0 DVD PLAYER COMPONENT DVD L R S VIDEO VIDEO VCR Cable Receiver Note Selecting a Source ANTENNA CONNECTION Connect Antenna cable to the ANT IN socket on rear of the TV For good operation of the set good signal is required In the strong signal area an indoor antenna could be used but otherwise an outdoor antenna should be used NOTE 1 The aerial cable should not be bundled to the power cord COMPONENT YCbCr YPbPr DVD INPUT 1 Connect the component outputs YCbCr YPbPr of DVD player to the component YPbPr input of the the TV 2 Connect audio outputs L R of a DVD player to the audio input YPbPr respectively 3 Press the PLAY button on the DVD player VIDEO INPUT 1 Connect the component outputs VIDEO out of VCR Cable receiver to AV1 AV2 2 Connect audio outputs L R of a DVD player to the audio input AV1 AV2 respectively 3 Press the PLAY button on the VCR Press SOURCE key on remote or on front panel keypad Asource OSD will appear Press Up Down key on the remote or CH CH on front panel can be use
15. l corrode the remote handset or cause the batteries to burst Replace both batteries at the same time Don t Mix battery types alkaline with carbon zinc etc Don t recharge EN 11 5 Use more of your TV 5 1 Access TV menus 1 Press Menu then menu screen appears 2 Select one of the following then press OK Watch TV If a source other than TV is selected switch back to the TV sources Device List Access Device List to change to other source Browse USB View photos and play music and movies contained in USB storage devices Setup Access menus to change picture sound and other settings Watch Video Watch videos in USB mode Listen Music Listen music in USB mode View Photos View photos in USB mode 5 2 Picture Menu This function is used to select the presetted picture settings Smart Picture Personal Cinema Sports Vivid Bright Brightness These settings are used to adjust the Brightness Contrast Color Gpntrast Sharpness values for fine adjustments of the picture Sharpness Color Use this option to select and change color temperature Temperature Normal Warm Cool If picture is not Ok with auto setting then adjust Horizontal position Vertical position manually to adjust the desired picture settings V Position Note Applicable only in VGA mode H Position The Noise reduction On Off reduce the noise Noise reduction by applying temporal and spatial noise reduction filters
16. lbum 2 Press OK 3 Press D to go back to the USB browsing page 4 Select one photo album 5 Press OK to start playing the slideshow EN 17 Read Text 1 Inthe USB browser select Text 2 Press OK to view 3 To control play press the play buttons Aor V tosee the up or down row lt or P to see the previous or next page Change Text settings While you read text press ft press to access one of the following settings then press OK Play Pause Play or pause text Repeat Play once current file repeatedly or folder repeatedly Shuffle on Shuffle off Play text in sequence or at random Font Select the font size style and color Show info Display the file name size and next text In Photo Music or Video select any file or folder then press to access any one of the folowing Sort Sort the files according to the type date and name Media Type Select the media type as Photo Music Video or Text Thumbnail Size Select the thumbnail size as Small Large and iddle Normal Parser Recursive Parser Select the options for parsing of files Disconnect a USB storage device Caution e Follow this procedure to avoid damage to your USB storage device 1 2 Press to exit the USB browser Wait for five seconds then disconnect the USB storage device EN 18 7 Troubleshooting Before you call the service person ch
17. mer Maximum time can be set 120 minutes in steps of 10 20 30 40 50 60 90 120 minutes Switch the E sticker on or off For shop mode only FUCKS Note Optional Depending on model Use this function to make the sound On Off while switching from standby mode Used to display date in yyyy mm dd format FEATURES Date teto dspiay datinyynmistomat Time Display the On time press Ok key to enter and adjust the time HH MM SS format Power On Timer Select Power On Timer On set Timer HH MM SS and Timer Power On channel 1 200 on given time set will be released from Power On Channel standby and entered channel will be displayed as on channel Power Off Timer Select Power Off Timer On Set the Timer HH MM SS Timer the TV will turn into standby Off on selected Off time Phase Adjust the phase 0 31 and clock 0 255 to remove or reduce picture noise Clock If noise appears adjust frequeny by clock for fine adjustments Note Only applicable for VGA mode Auto setting allows the PC screen of TV to self adjust This automatically Auto Setting sets the H position V position Phase and clock Note Only applicable for VGA mode Factory Select this switch to reset the user menu To reset Child lock hotel mode menu select Settings Clear all option in respective menu EN 13 Note 1 Timer will get reset if mains powered On Off 2 Use Left Right keys on the remote change the option and up down to navigate 3 Press
18. nd connectors be sure to leave a clearance of at least 2 2 inches or 5 5cm from the back of the TV TV screen Required Required size inches pitch mm mounting bolts 42PFL3457 V7 200x200 4x M6 32PFL3057 V7 200x100 4xM4 Product specification Design and specifications are subject to change without notice 42PFL3457V7 e With TV stand Dimension WxHxD 1017 x 667 x 240 mm e Weight 19 4 kg e Without TV stand Dimension WxHxD 1017 x 667 x 46 mm e Weight 17 7 kg 32PFL3057V7 e With TV stand e Dimension WxHxD 784 x526 x 240 mm e Weight 13 kg Without TV stand Dimension WxHxD 784 x 526 x 49 mm e Weight 11 3 kg 21 EN Consumer Guidelines 1 Kindly ensure that the dealer fills out the Warranty card correctly 2 To avail the Warranty please register your product with the Philips Log on to www Philips com OR Contact Philips Consumer Care Centre 3 In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set the type no and serial no of the set 4 On your lodging a complaint a trained technician will call on you promptly In the event of the technician deciding that set requires attention at the service station the technician would arrange to get the set picked up to be delivered to the service station for further attention Homecalls by the technician woul
19. ord e To disconnect the TV power cord easily from the power outlet ensure that you have full access to the power cord at all times EN 3 When you disconnect the power cord always pull the plug never the cable Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV 4 EN s Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and color fading wipe off water drops as soon as possible Disposal of your old product and batteries e Your product is designed and manufactured with hig
20. ork carried out by persons other than a Philips dealer or Authorised Service Center e Any modification or alteration of any nature made in the electrical circuitry of the set This Warranty Card is not completed and signed immediately on delivery of the set by the Philips Dealer Fading effects and or Ghosts Multiple Image in picture if any arising due to location signal reception Defects due to causes beyond control like lightning abnormal voltage Acts of God or while in transit to purchaser s residence Refer Consumer Guidelines for further details PHILIPS PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice PHILIPS and the PHILIPS Shield Emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V www philips com LED TV 32 42 1100083235 Rev 01 Rajmudra
21. s or buildings The picture is spotted or e There may be interference from automobiles trains high interference on picture and voltage lines neon lights etc Noisy sound e There may be interference between the antenna cable and the power cable Try positioning them further apart There are stripes on the screen Is the unit receiving interference from other devices or colour fade or interference Transmission antennas of radio broadcasting stations and noisy sound and transmission antennas of cellular phones may also cause interference e Use the unit as far apart as possible from devices that may cause possible interferences Picture with no colour and e Check colour setting of the set and check colour system normal sound e Check if station is broadcasting colour picture Picture is scrambled and e Retune channels normal or weak sound Incorrect position of picture e Auto Adjust Horizontal Vertical position in PC mode e Manually try to adjust horizontal vertical position Vertical bars or stripes on e Auto Adjust try to adjust clock manually background in PC mode Horizontal noise in PC mode e Auto Adjust or adjust phase and clock 19 EN 8 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats HDMI e Resolution refresh rate 720 x 480p 60 Hz 720 x 576p 5
22. this manual any adjustments or assembly procedures not recommended or authorised in this manual shall void the warranty 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a Safety Risk of electric shock orfire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use Never place the TV remote control or batteries near nakedlames or other heat sources including direct sunlight To prevent the spread of fire keep candles or otherflames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swiveled ensure that no strain is exerted on the powecord Strain on the power cord can loosen connections and cause arcing Risk of electric shock orfire e Never expose the remote control or batteries to rain water or excessive heat Avoid force coming on to power plugs Loose power plugs
23. to the video data Digital Crystal Dynamic Contrast These functions improve Dynamic Contrast of the Clear Flesh tone picture On Off and flesh tone On Off Color Enhancement The Color Enhancement On Off adjust the color parameter of picture contents MJC Use this function to control motion in pictures You can select Effect Off Low Middle High Demo Partition All Left Right DDemo On Off Note This feature not applicable in USB amp VGA 12 EN 5 3 Sound Menu This function is used to select the preset sound modes Smart Sound Smar Sound Personal News Standard Music 100Hz To 10Khz The Equalizer 100Hz 300Hz 1KHz 3KHz 10KHz can be changed by the user The main speaker volume can be adjusted by varying this User can select the left right speaker intensity by changing The main speaker can be made On Off by this option Auto Volume This function is used to for automatic adjustment of volume Control level On Off AV Out The AV out volume can be controlled by selecting AV out fixed or variable 5 4 Features Menu Back Light The backlight value can be varied This function is used to adjust brightness level of panel TV is in Normal state when this is OFF To save the power consumed by TV select power saving modes Low Mid High In Audio Only mode only Audio is ON and Picture is OFF Press any key except VOL and Mute to exit Audio Only mode Energy Saving Sleep Timer Sets Sleep Ti
24. y Change music settings While you play music press ft Menu to access one of the following settings then press OK e Play Pause Play Pause music Repeat Play Song once current file repeatedly or folder repeatedly Smart Sound Select sound modes as Personal Speech Standard Music e Shuffle on Shuffle off Play songs in sequence or at random Show Spectrum Hide spectrum Select the options to show or hide the spectrum Show info Display the file name Duration next song e Audio Only Only Audio is On and display screen is Off Watch video 1 Inthe USB browser select Video or in Menu select Watch Video 2 Press OK to play 3 To control play press the play buttons gt to play e Ito pause e or P to play the previous or next video Change video settings While you play video press ft press to access one of the following settings then press OK e Play Pause Play or pause video Repeat Play once current file repeatedly or folder repeatedly Show info Display the file name duration and next video Smart Picture Selct picture mode Personal Cinema Sport Vivid Bright Smart Sound Select sound mode Personal Speech standard Music Screen Mode Select screen mode normal or 16 9 or 4 3 for playing Playing music while viewing slideshow You can view slideshow and play background music at the same time 1 Select one music a
25. ze images press this key on images USB Depending On Model Press this key to directly access the USB mode from any source FREEZE EXIT O O FREEZE Depending on Model This key is used to freeze unfreeze the standard video signal Press Menu Source A CH 0 9 digit key Zoom CH on the remote to exit freeze Not applicable in VGA USB source TV Press this key to directly access TV mode EXIT Exits the menu system T INCR SURR TELETEXT CO DEMO Red SCENEA Green DUALI Yellow Note INCR SURR Depending on model Enables Incredible Surround for stereo sources Enables spatial mode for mono sources TELETEXT Depending on model DEMO Depending on model Used for SWAP function in Channel edit menu SCENEA Depending on model Used for Insert function in Channel edit menu DUAL 1 0 Depending on model Used for Copy function in Channel edit menu 1 Depending on remote some keys may not be available 2 Teletext and I II DUAL is not available in India 10 EN 4 3 Battery Installation 1 Remove the battery compartment door 2 Install 2 AAA or UM 4 1 5V batteries or equivalent with the correct polarity as indicated 3 Replace the Battery compartment door NOTE Remove batteries when they are exhausted or if the remote control is not to be used for a long time BATTERY PRECAUTIONS Incorrect use of batteries can cause electrolyte leakage which wil
Download Pdf Manuals
Related Search