Rose CrystalView Mini USB
Contents
1. Technical Support hours are from 8 00 am to 6 00 pm CST USA Monday through Friday Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose Electronics Technical Support Department CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL E SAFETY Safety The CrystalView Mini USB has been tested for conformance to safety regulations and requirements and has been certified for international use Like all electronic equipment the CrystalView Mini USB should be used with care To protect yourself from possible injury and to minimize the risk of damage to the Unit read and follow these safety instructions W Follow all instructions and warnings marked on this Unit Except where explained in this manual do not attempt to service this Unit yourself Do not use this Unit near water Assure that the placement of this Unit is on a stable surface W Provide proper ventilation and air circulation W Keep connection cables clear of obstructions that might cause damage to them W Use only power cords power adapter and connection cables designed for this Unit W Keep objects that might damage this Unit and liquids that may spill clear from this Unit Liquids and foreign objects might come in contact with voltage points that could create a risk of fire or electrical shock W Do not use liquid or aerosol cleaners to clean this Unit Always unplug this Unit from its electri2. Video channel 2 75 150 Switch 1 Video 1 Switch 2 Video 2 Step 4 Connect the Local and Remote units together with up to 150 of CATx cable NOTE Cable length must match DIP switch settings Step 5 Power up equipment A CPU Local monitor B Remote unit C Remote monitor audio and serial devices CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL EE 10707 Stancliff Road Houston Texas 77099 Phone 281 933 7673 Internet WWW ROSE COM
3. amplification To set this open up the Remote unit and locate the jumper labeled MIC on the daughter board Connect this jumper across the pins The Local unit s Line Out connection should then be wired to Line In Blue on your sound card If your microphone is already amplified follow the second method but DO NOT install the amplification jumper in the Remote unit CRYSTALVIEW USB INSTALLATION AND OPERATIONS MANUAL SERVICE and MAINTENANCE Service Information Maintenance and Repair This Unit does not contain any internal user serviceable parts In the event a Unit needs repair or maintenance you must first obtain a Return Authorization RA number from Rose Electronics or an authorized repair center This Return Authorization number must appear on the outside of the shipping container See Limited Warranty for more information When returning a Unit it should be double packed in the original container or equivalent insured and shipped to Rose Electronics Attn RA 10707 Stancliff Road Houston Texas 77099 USA Technical Support If you are experiencing problems or need assistance in setting up configuring or operating your CrystalView Mini USB consult the appropriate sections of this manual If however you require additional information or assistance please contact the Rose Electronics Technical Support Department at Phone 281 933 7673 E Mail TechSupport rose com Web www rose com
4. from the CPUs USB ports NOTE Adding a bus powered USB hub between the Local Unit and CPU is not recommended CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL Step 2 Connect the Remote equipment to the Remote unit Equipment Connections 1 Primary monitor amp Secondary monitor 2 USB Keyboard and Mouse 3 Serial devices 4 Powered stereo speakers 5 Microphone Figure 4 Remote to KVM Dual video serial audio model The basic connections between the Remote unit and a KVM station are shown in Figure 4 The secondary video monitor serial device speakers and microphone only apply to the dual video serial and audio models An internal pull up resistor provides bias for condenser microphones Additional 17dB microphone amplification can be added by opening the remote unit and connecting a jumper across the pins labeled MIC NOTE A power adapter included is needed to provide power to the Remote unit To avoid damage to the Remote unit use only the power adapter supplied Step 3 Set the CATx cable distance dip switches Set the Dip switch located on the bottom of the Remote unit to the following for the CATx cable distance needed rud UIS UM Switch 1 Off Video channel 1 15 75 Switch 1 On Video channel 1 75 150 Switch 2 Off Video channel 2 15 75 OFF Switch 2 On Video channel 2 75 150 Switch 1 Video 1 Switch 2 Video 2 CRYSTALV
5. 0 1 2000 TABLE OF CONTENTS Contents arid LU 1 System Introduction i e raa eaa ed uae Edu 1 UTERE 2 Compatibility 2 Package contents 3 CrystalView Mini USB Models seem 4 COMNEC OTS d H 5 Typical Application eene 6 CADDIES 7 CrystalView Mini USB Local Unit to CPU cable 7 CrystalView Mini USB Remote Unit to a KVM station 7 CrystalView Mini USB Local Unit to Remote 7 oie m 8 Step 1 Connect interface cables from the Local unit to a computer 8 Step 2 Connect the Remote equipment to the Remote unit 9 Step Set the CATx cable distance dip switches 9 Step 4 Connect Local unit to Remote unit with CATx cable 10 Step 5 Apply power 10 Operating Instr ctlons ioci c E tle d eure 11 Serial Interface Set Up and Operation 12 Audio Interface Set Up and Operation 12 Service
6. F Secondary video HD15M to HD15F CAB 08C5UTPnnn CAT5 unshieded twisted pair CAB 08C6UTPnnn CATE6 unshieded twisted pair CAB 08C7UTPnnn CAT7 unhieded twisted pair CAB 08C5STPnnn CAT5 shieded twisted pair CAB 08C6STPnnn CATS shieded twisted pair CAB 08C7STPnnn CAT7 shieded twisted pair nnn cable length in feet Dp CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL APPENDICES Appendix C Quick Start Guide The following procedure is designed to provide easy installation for the CrystalView Mini USB extender Step 1 Connect the Local unit to a CPU s video USB audio and serial ports Connect a Local monitor s to the Video out HD15F Gm UNE LEVEL AUDIO SERIAL our iN A QV use IN svc CJ Step 2 Connect Remote unit to a USB keyboard mouse monitor audio serial devices and other USB devices Video 1 port connects to the CPU s primary video port Video 2 connects to the CPU s secondary video port Connect the 5V power supply Saya age m 5 9 5VDC 2 Step 3 Set Video distance dip switches Set the Dip switch located on the bottom of the Remote unit to the following for the 5 cable distance needed Switch 1 Off Video channel 1 15 75 ON Switch 1 On Video channel 1 75 150 OFF Switch 2 Off Video channel 2 15 75 12 Switch 2 On
7. IEW MINI USB INSTALLATION AND OPERATIONS MANUAL INSTALLATION Step 4 Connect Local unit to Remote unit with CATx cable Figure 5 Local to Remote unit Connect up to 150 of CAT5 CAT5e CAT6 or CAT7 cable between the RJ45 connector on the Local unit and the RJ45 connector on the Remote unit Two cables are required for dual video and or serial and audio models Note CATx cable from RJ45 port 1 carries the primary video keyboard and mouse signals CATx cable from RJ45 port 2 carries the secondary video serial and audio signals Step 5 Apply power Connect the power adapter to the Remote unit s power jack Apply power to the monitors and computer Power for the Local unit is obtained from the computer s USB ports If only video is being transmitted and no USB connections are made a Local power adapter optional must be used With power applied to all units and devices the Remote monitor should display the computers video Dm CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL OPERATION Operating Instructions Operating your equipment using the CrystalView Mini USB extender is no different than having your equipment connected directly to a computer The only difference is you can be up to 150 feet away Applications can be executed data updated computer maintenance performed or anything normally performed locally can now be done remotely Upon power up the Local and Remote monitors wil
8. INONMA 19 Maintenance and Repair 13 Technical Support tenian 13 RI EE 14 Figures Figure T Models e terc tette cerato iode 4 Figure 2 Typical Application 6 Figure 3 Local to CPU Dual video model 8 Figure 4 Remote to KVM Dual video serial audio model 9 Figure 5 Local to Remote 10 Figure 6 Dual Video front view 11 Tables Table 1 RJ45 LED functions 11 Appendices Appendix A General 5 15 Appendix B Parts and Cables 16 Appendix C Quick Start Guide 17 INTRODUCTION Disclaimer While every precaution has been taken in the preparation of this manual the manufacturer assumes no responsibility for errors or omissions Neither does the manufacturer assume any liability for damages resulting from the use of the information contained herein The manufacturer reserves the right to change the specifications functions or circuitry of the product without notice The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances outside the manufacturer s control The manufacturer will not be responsible for any loss damage or injury arising directly or indirectly from the use of this pr
9. INSTALLATION AND OPERATIONS MANUAL CATS EXTENDER CrystalView Mini USB e ROSE CATS EXTENDER CrystalView Mini USB BOSE 2 ELECTRONICS 10707 Stancliff Road Phone 281 933 7673 Houston Texas www rose com LIMITED WARRANTY Rose Electronics warrants the CrystalView Mini USB to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer Should this product fail to be in good working order at any time during this one year warranty period Rose Electronics will at its option repair or replace the Unit as set forth below Repair parts and replacement units will be either reconditioned or new All replaced parts become the property of Rose Electronics This limited warranty does not include service to repair damage to the Unit resulting from accident disaster abuse or unauthorized modification of the Unit including static discharge and power surges Limited Warranty service may be obtained by delivering this unit during the one year warranty period to Rose Electronics or an authorized repair center providing a proof of purchase date If this Unit is delivered by mail you agree to insure the Unit or assume the risk of loss or damage in transit to prepay shipping charges to the warranty service location and to use the original shipping container or its equivalent You must call for a return authorization number first Under no circumstances will a uni
10. LATION AND OPERATIONS MANUAL Remote Local Remote Local Rear Single Video Model Single Video Model with Serial Audio Remote Local Rear Dual Video Model Dual Video Model with Serial Audio Figure 1 Models Connectors Front panel All models RJ45 1 Single Video models 2 Dual Video models Rear panel Single Video Serial amp Audio models Remote Video USB Audio Serial Power Local Video In Video Out USB Audio Serial Power HD15F Type A 4 port hub 2 3 5mm audio jacks Serial Audio model only DB9M DTE Serial Audio model only 5VDC adapter connector HD15M HD15F Type B 2 3 5mm audio jacks Serial Audio model only DB9F DCE Serial Audio model only Optional 5VDC adapter connector Rear panel Dual Video Serial amp Audio models Remote Video Out USB Audio Serial Power Local Video In Video Out USB Audio Serial Power CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL HD15F Type A 4 port hub 2 3 5mm audio jacks Serial Audio model only DB9M Serial Audio model only 5VDC adapter connector 2 HD15M 2 HD15F Type B 2 3 5mm audio jacks Serial Audio model only DB9F Serial Audio model only Optional 5VDC adapter connector Typical Application Figure 2 Typical Application CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL Cables CrystalView Mini USB Local Unit to CPU cable 15 to HD15F cab
11. by approximately 30 feet 10m CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL INSTALLATION Installation Please refer to the safety section first before proceeding with any installation or configuration of the CrystalView Mini USB Installation of the CrystalView Mini USB consists of five easy steps 1 Connect interface cables from the Local unit to a computer Connect the Remote keyboard mouse monitor speakers microphone serial device and other USB devices to the Remote unit 3 Setthe CATx cable distance dip switches if needed 4 Connect Local unit to Remote unit with CATx cable 5 Connect the power adapter to the Remote unit and applying power More advanced users can refer to Appendix C for a quick installation and cable length setting guide Step 1 Connect interface cables from the Local unit to a computer Cable Connections 1 HD15MF cables 2 USB Keyboard 4 Mouse 3 USB Type to B 4 Primary monitor 5 Secondary monitor 6 Audio 7 Serial device Figure 3 Local to CPU Dual video model The basic cable connections between the Local unit and a CPU are shown in Figure 3 For single video models only one HD15MF cable is needed between the Local unit and the CPU and the secondary monitor is not present For non serial audio models no audio or serial cables are used If only video is being transmitted an auxiliary power adapter will be needed Power for the Local unit is obtained
12. cal outlet before cleaning W Do not use to link between buildings m If the building has 3 phase AC power try to ensure that equipment connected to the Local and Remote units is on the same phase W Try not to route the CATx link cable alongside power cables W Ensure that the monitor connected to the Remote unit is connected to power ground and does not use an isolated power supply W Ensure that the system connected to the Local unit is connected to power ground W The Remote unit and power adapter can get warm Do not obstruct the airflow or ventilation holes to the units W This product is not suitable for use in isolated medical environments Unplug this Unit and refer servicing to a qualified service center if any of the following conditions occur connection cables are damaged or frayed Unit has been exposed to any liquids Unit does not operate normally when all operating instructions have been followed Unit has been dropped or the case has been damaged Unit exhibits a distinct change in performance indicating need for service mn CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL APPENDICES Appendix A General Specifications CrystalView Mini USB Resolution 1600 x 1200 75Hz Video VGA to UXGA RGB compatibility Video I O 0 7V Video 2 stage compensation Video Coupling DC Sync I O Separate Composite TTL level Sync polarity
13. ccess your computer has several applications that make it convenient for the users You can locate your computers in a secure area and access them from other unsecured areas Computers used in hazardous industrial environments can be accessed remotely keeping the users safe and unexposed to any hazards CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL Features Single and Dual Video support Video resolutions up to 1600 x 1200 75hz Extended distance up to 150 feet 50m over standard CATx cabling e USB 2 0 low full speed only compliant e 4 port USB hub on the Remote unit e DDC emulation on all video channels ensures compatibility with most multi head graphics cards e Local video output on all video channels Allows dual access when a Local USB keyboard and mouse are connected to the CPU directly or through a externally powered USB hub Status LED indicators located on each RJ45 port Over voltage protection prevents the units from operating if incorrect PSU power is applied 19 2K Baud Surge protection on each RJ45 port Serial port option enables a serial device to be extended at up to e Bi directional stereo audio option provides high quality 16 bit digitized audio e Local unit is powered by the USB port connection For video only applications an optional 5V PSU is required e Remote unit is powered by a 5V PSU power adapter e Rack mount option Compatibility Computers 4 USB ports hub PCs w
14. ged directly into the Remote unit The extender s serial interface transmits receives six signals 3 signals in each direction Four of these signals are used for hardware handshaking in addition to TX amp RX It is possible to configure the serial interface to handle up to three simple 2 wire Tx Rx only serial links To do this you will need to construct a custom breakout cable Please contact Technical Support for further information Audio Interface Set Up and Operation The audio interface is line level and is designed to take the output from a sound card or other line level source and be connected to a set of powered speakers at the other end of the link Stereo audio may be transmitted either way across the link simultaneously No setup is required unless a microphone is connected to the Remote unit Connect the extender as follows The line level output from your sound card connects to Line In on the Local unit e Connect Line Out on the Remote unit to a set of powered speakers e A microphone may be plugged into the Line In connector on the Remote unit There are two ways of setting up a microphone e The Local unit s Line Out connection should normally be wired to the microphone input Pink on your sound card The sound card should then be set up to provide additional amplification 17dB This is the preferred connection method Alternatively the Remote unit itself can provide microphone
15. ide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense IBM AT and PS 2 are trademarks of International Business Machines Corp Microsoft and Microsoft Windows are registered trademarks of Microsoft Corp Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owner Copyright Rose Electronics 2006 All rights reserved No part of this manual may be reproduced stored in a retrieval system or transcribed in any form or any means electronic or mechanical including photocopying and recording without the prior written permission of Rose Electronics Rose Electronics Part MAN CRVM USB Printed In the United States of America Revision 1 4 FCC IC STATEMENTS EU DECLARATION OF CONFORMITY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates uses and can radiate radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturer s instructions may cause
16. interference to radio communication It has been tested and found to comply with the limits for a Class A digital device in accordance with the specifications of Part 15 of FCC rules which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de la classe A prescrites dans le R glement sur le brouillage radio lectrique publi par Industrie Canada DECLARATION OF CONFORMITY EUROPEAN UNION DECLARATION OF CONFORMITY This equipment is in conformity with the protection requirements of the following Council Directives The Declaration of Conformity is based upon compliance of the product with the following harmonized standards EN55022 1998 EN55024 1998 EN61000 3 2 2001 EN61000 3 3 2000 EN6095
17. is preserved Vesa DDC Emulated DDC for each video channel Keyboard USB Computer KVM Mouse USB Computer KVM USB USB 2 0 compliant low full speed only Local unit appears as a self powered USB 1 1 hub to the CPU Remote unit contains integral USB 1 1 4 port hub Extension 150 feet 50m Distance Serial Baud rate 19 2K Baud Data format Transparent Signals TX RX RTS CTS DTR DSR Audio Bl directional stereo 16 bit 38 4kHz 470 Audio level P P max Power Local unit 5V Supplied from CPUs USB port Remote unit 5 PSU Over under voltage protection gt 5 6V 4 3V Dimensions Width Depth Height 5 9in 4 3in 1 7in 145mm 110mm 44mm Weight 6 6 lbs 2 0Kg Environmental Operating Temp 32 F 104 F 0 C 40 C Storage Temp 22 F 149 F 30 C 65 C Humidity 5 90 non condensing Approval Europe CE CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL Appendix B Parts and Cables Part Number Description CRK M2U1V Single Video KVM Extender units CRK M2U2V Dual Video KVM Extender units CRK M2U1V AUD Single Video KVM Extender units w serial audio CRK M2U2V AUD Dual Video KVM Extender units w serial audio RM BR3 Rack mount kit CAB USBABnnn USB Type A to Type B CAB DB9MFnnn Serial DB9M to DB9F CAB SPMMnnn CAB CXVMFnnn CAB CXVMFnnn Audio 3 5 mm Primary video HD15M to HD15
18. ith USB keyboard mouse or Monitors VGA to UXGA Separate or composite sync Emulated DDC for each video channel Keyboards USB keyboard Mouse USB mice Serial Devices Serial Audio model only Audio Devices Serial Audio model only Touchscreens Graphic Tablets Serial printers plotters Computer terminals Other standard asynchronous serial devices Compatible sound cards Amplified or non amplified microphone Amplified computer stereo speakers Other audio devices that transmit receive signals less than 5 volts peak to peak CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL Package contents The package contents consist of the following W The CrystalView Mini USB Units as ordered W Power adapter for Remote Unit Auto switching transformer m Installation and operations manual CPU serial audio and CAT x cables are usually ordered separately If the package contents are not correct contact Rose Electronics or your reseller so the problem can be quickly resolved Rose Electronics web site Visit out web site at www rose com for additional information on the CrystalView Mini USB and other products that are designed for data center applications classroom environments and other applications About this manual This manual covers the installation and operation of the CrystalView Mini USB single and dual video models and Serial Audio models CRYSTALVIEW MINI USB INSTAL
19. l display the computer s video Accessing the computer can be performed from the local or remote station Assess to the computer is performed simultaneously from both the local and remote KVM stations NOTE Local and Remote keyboard and mouse activity if performed simultaneously may produce intermixed results The Local and Remote units RJ45 connectors have a Yellow and Green LED in the upper left and right corner of the connector see Figure 6 The following table explains the LED status and functions Status Yellow LED Green LED OFF No data transferred Remote unit not powered Not connected Over voltage condition Power not applied to Remote unit ON USB hub functioning Remote unit powered properly Yellow LED is only active on the primary Interconnect 1 connector Table 1 RJ45 LED functions Crystal View Mini USB ROSE INTERCONNECT Yellow LED Green LED Figure 6 Dual Video front view CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL E Serial Interface Set Up and Operation No setting up or user adjustments are required for connecting a serial device The Remote unit s serial port is wired as DTE the same as that on a PC To connect a serial printer or other DTE rather than DCE device to the Remote unit you will need a Null Modem crossover cable between the Remote unit and the printer Select Xon Xoff software flow control on the printer and PC A serial touch screen may be plug
20. le is used to connect from the Local Unit to a CPUs video port If Local viewing is needed connect a monitor to the HD15F video out port on the Local unit The Serial Audio models use two male to male 3 5mm audio cable and a DB9MF serial cable These connect directly from the Local unit to the appropriate PC ports CrystalView Mini USB Remote Unit to a KVM station The majority of Remote unit installations do not require any additional cables The Remote monitor connects directly to the HD15F connector If your Remote monitor is a flat panel TFT monitor you must adjust the clock and or phase manually or using the auto adjust feature of your monitor Connect the USB keyboard and mouse to the USB type A ports Using the serial audio models amplified speakers connect directly to the Line Level Audio OUT connector and a microphone connects directly to the Line Level Audio IN connector Serial devices such as Touch Screens connect directly to the Remote unit s DB9M connector CrystalView Mini USB Local Unit to Remote Unit The Local and Remote units connect together using up to 150 feet 50 meters of CATx cable terminated with RJ45 connectors Depending on the environment office manufacturing high EMF areas use UTP STP or FTP CATx cable NOTE Patch panels USB hubs and additional USB devices attached to the units will reduce the maximum CATx cable distance Typically each USB hub or USB device connected will reduce the distance
21. oduct System introduction Thank you for choosing the Rose Electronics CrystalView Mini USB enhanced KVM station extender The CrystalView Mini USB is the result of Rose Electronics commitment to providing state of the art solutions for today s demanding workplace The CrystalView Mini USB has proven to be a valuable investment for any business big or small that has a need to access CPUs from Remote locations The CrystalView Mini USB is available in a single or dual video model with Serial Audio options The single and dual video models have both Local and Remote access capability This allows a KVM station to be connected to the Remote and Local Unit Access to the connected computer or KVM switch can be performed by a Local user or a Remote user Access is simultaneous with no lockout of the local or remote user The CrystalView Mini USB system consists of two Units a Local Unit and a Remote Unit The Local Unit connects to your computers keyboard monitor and mouse ports or to a KVM switch The Remote Unit connects to a keyboard video monitor and mouse The Local and Remote Units are connected together with industry standard CAT 5 CAT 5e or CAT 6 shielded or unshielded solid core twisted pair cable terminated with RJ45 connectors All models can extend the distance from the CPU with up to 150 feet CAT x cable can be ordered from Rose Electronics in 25 1 000 foot lengths Using the CrystalView Mini USB to remotely a
22. t be accepted without a return authorization number Contact an authorized repair center or Rose Electronics for further information ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THIS PERIOD SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE YOUR SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE IN NO EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY ANY OTHER PARTY SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS SO THE ABOVE MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to prov
Download Pdf Manuals
Related Search