Home

Emerson EWC19T5 TV VCR Combo User Manual

Contents

1. NOTE Bent pin E Before plugging the antenna into the ANT jack of the unit check that the pin is SES Y not bent If it is bent straighten the pin as illustrated then plug the pin into the Plug ANT jack of the unit Needs to be Straight pin straightened VHF UHF COMBINED ANTENNA CABLE WITH CONVERTER DESCRAM A VHF UHF 75 ohm combination antenna can be BLER BOX OR SATELLITE BOX connected to ANT jack of the unit If your cable service supplies you with a converter box or if you use a satellite system you can use the VHF UHF SEPARATE ANTENNAS basic connection shown above In some areas it will be necessary to use an outdoor Channel selection must be made with the converter antenna box or satellite box This means that channels cannot CABLE WITHOUT CONVERTER be changed using the remote control of this unit DESCRAMBLER BOX Use this connection if your cable system connects directly to the unit without a converter box NOTE e For your safety and to avoid damages to the unit unplug the antenna cable from the ANT jack before moving the unit 12 EN CONNECTING TO FRONT A V INPUT JACKS When you watch a program recorded on another source VCR or video camera use the Audio Video input jacks on the front of the unit AUX Connect the Audio Video output jacks of another source to the AUDIO L R and VIDEO jacks of this unit Then press SELECT or CH A W until AUX appears on the
2. ADD DELETE Example CH8 4 Delete or add it from or into memory Hit ENTER The channel number changes to light red The channel is deleted from memory e To delete another channel repeat steps 3 to 4 e If you hit ENTER again the channel is memo rized again Added channel Light blue Deleted channel Light red 5 Exit the channel setup mode Hit SETUP to exit the menu NOTE e To confirm that channel s has been deleted or added press CH A VW EN CLOCK SET UP AUTO MANUAL TV VCR The unit clock must be set correctly so that VCR timer recording is possible It is suggested that the clock be set manually when first setting up the unit then set to ON the auto clock setting which will periodically correct the setting if necessary NOTE e If you cannot receive a station with time signals auto clock setting cannot be performed Use manu al setting only MANUAL CLOCK SETTING Make sure e The unit must be turned on In the example below the clock is to be set to DATE May 6th 2005 SETTING TIME 5 40PM 1 Select SETTING CLOCK TVNCR SETUP 5 Select the year Press A V until your desired year appears Example 2005 Then hit gt 6 Select the hour Press A W until your desired hour appears Example 5 PM Then hit BP 7 Select the minute Press A W until the desired minute appears
3. OWNER S 7 Emerson EMERSON AND THE G CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP PARSIPPANY NEW JERSEY U S A COLOR TV VCR DVD TRIPLE COMBO EWC19T5 19 inch INSTRUCCIONES EN ESPANOL INCLUIDAS If you need additional operating assistance after reading this owner s manual or to order replacement accessories please call TOLL FREE 1 800 256 2487 Or visit our WEB SITE at http www EmersonAudioVideo com VHS 2 Please read before using this equipment WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT CAUTION To REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE The caution marking is located on the rear of the cabinet IMPORTANT SAFEGUARDS 1 Read instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed
4. 38 39 40 41 42 43 44 45 46 47 PARA INSERTAR LAS PILAS 1 2 3 Boton SEARCH MODE Presione para localizar un punto deseado Bot n AUDIO Modo DVD Presione para seleccionar un modo de sonido o idioma de audio deseado Bot n SUBTITLE Presione para seleccionar el idioma de subt tulos deseado Bot n REPEAT Repite la reproducci n del disco t tulo cap tulo o pista actual Bot n ANGLE Presione para cambiar el ngulo de la c mara y ver la secuencia que se est reproduciendo desde un ngulo diferente si existe Bot n A B modo DVD Repite la reproducci n de una secci n seleccionada Bot n RETURN Permite volver a la pantalla anterior en el men de configuraci n Bot n ENTER Presione para establecer un ajuste Botones A V lt gt Modo TV VCR Presione para seleccionar un modo de ajuste en el men que aparece en la pantalla del televisor Presione tambi n para seleccionar o establecer ajustes en un ment en particular Modo DVD Presione para seleccionar un tem de men Bot n DISC MENU Muestra men del DVD Bot n ZOOM Ampl a parte de la imagen reproducida de un DVD Bot n MUTE Suprime la salida de sonido Presione de nuevo para restablecer el sonido Bot n SLEEP Utilice para ajustar el temporizador de dormir Toma ANT Conecte a una antena sistema de televisi n por cable o sistema de sat lite Cable de alim
5. CD 1 During playback press and hold gt or 4 4 for a few seconds et p 1 or lt lt 1 appears on the screen 2 select another speed repeat step 7 until your required speed number appears on the screen For DVDs fast forward reverse search speed is dif ferent depending on the disc Approximate speed is 1 x2 2 x8 3 x20 4 x50 and 5 x100 For Audio CDs approximate speed is 1 x2 2 x8 and 3 x30 When you press buttons on the main unit use SEARCH lt lt gt gt Toreturn to normal playback hit PLAY gt 36 SLOW FORWARD SLOW REVERSE DVD V 1 During playback hit PAUSE 10 2 Press and hold gt or lt a for a few seconds p 1 or dl 1 appears on the screen 3 select another speed repeat step 2 until your required speed number appears on the Screen e Slow forward or reverse speed varies with the disc Approximate speed is 1 1 16 2 1 8 and 3 1 2 e When you press buttons on the main unit use SEARCH lt lt gt gt 4 To return to normal playback hit PLAY gt ZOOM DVD V The Zoom function allows you to enlarge the video image and to pan through the enlarged image 1 Hit ZOOM during playback e Playback will continue 2 Hit ZOOM repeatedly to select the required zoom factor ZOOM1 ZOOM2 ZOOM3 or OFF 3 Press A V 4 P to move the zoomed pi
6. PCM for audio output in the setup mode Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers Refer to page 43 Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Ida EN TV VCR SECTION TV OPERATION AND SETTINGS WATCHING A TV PROGRAM TV VCR 1 Plug in the unit power cord Plug the unit power cord into a standard AC outlet NOTE e If any digits appear in the corner of the screen hit POWER without unplug ging the power cord 2 Turn on the unit Hit POWER to turn on the unit 3 Select the channel number Press CH A V or the Number buttons to select your desired channel number Note for using the Number buttons e You must precede single digit channel numbers with a zero for example 02 03 04 and so on e When selecting cable channels which are higher than 99 hit 100 first then press the last two digits Example to select channel 125 first hit 100 then hit 2 and 5 4 Adjust sound Press VOL A V to adjust the volume Hit MUTE to instantly mute the VOLUME 20 sound Hit it again to restore the previous sound level NOTE e If you press CH A V in the DVD mode you can change the TV channels Even if you turn off the unit in the DVD mode when you turn it on again it will go into the TV VCR mode TO WATCH CAB
7. QUICK CUSTOM INITIALIZE NOTE e If the menu does not appear hit PLAY gt first then hit STOP W Make sure the disc is in the stop mode then slowly hit SETUP twice 2 Select the desired item Press A W to select the desired item then hit ENTER to confirm Refer to the pages below to set up each item P 42 A Step 3 P 43 B Step 3 P 43 C Step 3 P 44 0 Step 3 P 44 E Step 3 A LANGUAGE SETTING Follow steps 7 to 2 in the CUSTOM MENU section above 3 Press A V to select the desired item then hit ENTER AUDIO Sets the audio language SUBTITLE Sets the subtitle language CUSTOM PARENTAL OTHERS LANGUAGE AUDIO ORIGINAL SUBTITLE OFF DISC MENU ENGLISH DISC MENU Sets the language for DVD menu 4 Press A V to select a setting then hit ENTER SETUP LANGUAGE e If OTHER is selected on AUDIO the AUDIO SUBTITLE or DISC MENU screen REN CO press four digit number to enter the code for the desired isome language Refer to the lan mn guage code list FRENCH e Only the languages support ed by the disc can be select SECUI ed ENGLISH FRENCH SPANISH 5 Hit SETUP to exit the menu NOTES e Langua
8. gt lt GROUNDING CONDUCTORS NEC SECTION 810 21 cS PAE GROUND CLAMPS POWER SERVICE GROUNDING alt ELECTRODE SYSTEM NEC ART 250 PART H 19 Damage Requiring Service Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged or frayed b If liquid has been spilled or objects have fallen into the unit c If the unit has been exposed to rain or water d If the unit does not operate normally by following the oper ating instructions Adjust only those controls that are cov ered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation e If the unit has been dropped or damaged in any way f When the unit exhibits a distinct change in performance this indicates a need for service 20 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same character istics as the original part Unauthorized substitutions may result in fire electric shock injury to persons or other haz ards 21 Safety Check Upon completion of any service or repairs to this unit ask the service technician to perform routine safe ty checks to determine that the unit is in proper operating con
9. TV VCR You can make copies of video tapes made by friends or relatives for your enjoyment You can not copy a DVD to a videotape WARNING Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws Connect your unit and a source Playing VCR using the following diagram This unit jen pa p HEADPHONE VIDEO _ B AUDIO ojo e o Ex Source VCR or camcorder Audio Video cable not supplied 1 Insert a pre recorded video cassette into the source VCR or camcorder 2 Insert a blank video cassette or one you want to record over into the unit s cassette compartment 3 Hit SPEED on remote control for the unit to select the desired recording speed SP SLP 4 Press CHANNEL A V on the unit until AUX appears on the screen 5 Hit REC OTR on the unit 6 Begin playback of the tape in the source VCR or camcorder NOTE e For best results during copying use the front panel controls whenever possible The remote control might affect the source VCR s playback operation 7 To stop copying hit B 4 STOP EJECT on the unit then stop the tape on the source VCR or cam corder EN TIMER RECORDING AUTOMATIC TIMER RECORDING TV VCR You may set the unit to start and end a recording while you are away You can set 8 programs to record on specific days daily or weekly within a 1 year period In the exampl
10. CONTRAST COLOR TINT SHARPNESS BRIGHT oooo0o000so0000000 3 Adjust the setting Press lt 4 gt to adjust to your desired level within 5 seconds BRIGHT to increase brightness to increase contrast to brilliant to decrease brightness to decrease contrast to pale CONTRAST COLOR TINT SHARPNESS e Even if there is a power failure of any kind the unit will retain its memory for this feature to purple to green to soft to clear 15 EN SLEEP TIMER TV VCR The Sleep Timer function turns off the unit without using POWER after a desired period of time NOTE This function does not work during the record ing mode 1 Call up the Sleep Timer Setting Hit SLEEP so that SLEEP 0 MINUTE appears 2 Set sleep time Hit SLEEP repeatedly until your desired sleep time appears Each additional press will increase the time by 30 minutes up to 120 minutes After 5 seconds the Sleep Timer setting will disap pear automatically SLEEP 120 MINUTE TO CANCEL THE SLEEP TIMER Hit SLEEP to call up the Sleep Timer Setting Hit SLEEP repeatedly until SLEEP 0 MINUTE appears CLOSED CAPTION SYSTEM TV VCR You can view specially labeled cc TV programs movies news and pre recorded tapes with either a dialogue caption or text display CAPTION mode You can watch dramas movies and news while captioning the dialogues and the contents of news
11. Example 40 8 Start the clock Hit SETUP Although seconds are not displayed MANUAL CLOCK SET MONTH DAY i 05 06 FRI 2005 l Y b 2 4 HOUR MINUTE MANUAL CLOCK SET MONTH DAY YEAR 05 06 FRI 2005 HOUR MINUTE Nl ni 7 MANUAL CLOCK SET MONTH DAY YEAR 05 06 FRI 2005 HOUR MINUTE NE 05 40 PM IN Hit SETUP TIMER PROGRAMMING m gt SETTING Press A V to point to SET USERS Ser UP TING CLOCK then hit ee ENTER TIME SEARCH 2 Select MANUAL CLOCK SET Press A V to point to MANU AL CLOCK SET then hit ENTER SETTING CLOCK AUTO CLOCK ON AUTO CLOCK CH SEARCH AUTO CLOCKCH 02 gt MANUAL CLOCK SET D ST OFF e If there is no local PBS station in your area or on your cable system select AUTO CLOCK and hit ENTER to turn OFF this function before this step 3 Select the month Press A W until your desired month appears Example May 05 Then hit gt Or hit lt 4 to go back one step MANUAL CLOCK SET HOUR MINUTE 4 Select the day Press A V until your desired day appears Example 6th 06 Then hit P gt MANUAL CLOCK SET HOUR MINUTE they begin counting from 00 when you hit SETUP Use this feature to synchronize the clock with the correct time NOTE e When unplugging the AC cord or if there is a power fai
12. SCENES DURING RECORDING TV VCR VOR You can ONLY watch the same TV program that is being recorded Hit PAUSE II to temporarily stop recording Press PAUSE 1 or RECORD 1 Select the channel to be recorded to resume recording Press the Number buttons or CH 10 NOTES CH A v e After 5 minutes the unit will NOTE automatically switch to the recording mode to pre vent tape damage e f Closed Caption mode is on the On Screen e If the unit is connected to a cable box or satellite Display will appear for 5 seconds then disappear box the unit must be on CH3 or CH4 then the channel to be recorded must be selected on the cable box or satellite box 2 Select the tape speed Hit SPEED to select the desired tape speed SP SLP SP Begin recording REC Hit RECORD SP 4 Stop recording Hit STOP W 28 EN OTR One Touch Recording TV VCR This function enables you to set a recording length simply by hitting REC OTR on the unit Make sure e The unit must be turned on e Insert a cassette tape with its erase prevention tab in place If necessary rewind or fast forward the tape to the point at which you want to begin recording NOTES e You cannot start OTR with the remote control Recording starts immediately when REC OTR is hit When REC OTR is hit 18 times the unit returns to the normal recording mode To stop the OTR operation
13. SLOW REVERSE 36 ZOOM xi secs dene wena edid 36 E SEARCH FUNCTION 37 TRACK SEARCH 37 TITLE CHAPTER SEARCH 37 TIME SEARCH 37 MARKER SETUP SCREEN 37 W SPECIAL PLAYBACK FUNCTION 38 REPEAT cps at pk te p hes 38 PROGRAM ashen 38 RANDOM PLAYBACK 38 CHANGING THE SETTINGS 39 SUBTITLE LANGUAGE 39 AUDIO LANGUAGE 39 STEREO SOUND MODE 39 CAMERA ANGLE 40 BLACK LEVEL SETTING 40 VIRTUAL SURROUND 40 E THE ON SCREEN INFORMATION 41 CHANGING THE DVD SET UP ITEMS evecta d 42 CUSTOM MENU 42 LANGUAGE SETTING 42 DISPLAY SETTING 43 AUDIO SETTINGS 43 PARENTAL CONTROL 44 OTHER SETTINGS 44 INITIALIZE cones es ees mmm 44 B MAINTENANCE 48 DISC HANDLING 48 B SPECIFICATIONS 49 ESPA OL 50 WB WARRANTY Back Cover EN FEATURES TV VCR Mode Rotary 4 head Record Playback System Four heads ensure excellent picture quality and special effects playback Index Search Fast forwards to start of next recording Slow Motion View recorded program at slower than normal speed Infrared remote control Trilingual on screen TV VCR setup display selectable in English Spanish or French Real time counter This shows the elapsed record
14. When Daylight Saving Time is ON the clock will change automatically as follows e First Sunday of April At 2 AM the clock immedi ately changes to 3 AM Any timer programming you have set to occur between 2 AM and 3 AM will not record e Last Sunday of October At 2 AM the clock immediately changes to 1 AM Make sure e The unit must be turned on 1 Select SETTING CLOCK Hit SETUP Press A V to point to SET TING CLOCK then hit ENTER V CHIP SET UP AGE El LANGU NGLISH CAPTION OFF ERO RETURN TIME SEARCH INDEX SEARCH 2 Set D S T Daylight Saving Time to ON Press A W to point to D S T then hit ENTER until ON appears SETTING CLOCK AUTO CLOCK ON AUTO CLOCK CH SEARCH AUTO CLOCKCH 02 MANUAL CLOCK SET 3 Exit the Daylight Saving Time mode Hit SETUP to exit the menu TO CANCEL THE DAYLIGHT SAVING TIME Repeat steps 1 to 2 and select OFF using ENTER EN NOTE V CHIP SET UP e When you select a rating and set it to BLOCK the higher ratings TV VCR will be blocked automatically This feature enables parents to prevent their children The lower ratings will be avail 8 000 from watching inappropriate material TV When able for viewing you try to access a program which is blocked e When you set the lowest rating to PROTECTED PROGRAM by messag
15. e La alimentaci n se conectar 2 Presione 4 OPEN CLOSE para abrir la bandeja de carga del disco 3 Ponga el disco deseado en la bandeja con la etiqueta hacia arriba 4 Presione PLAY gt La bandeja se cerrar autom ticamente y la reproducci n comenzar desde el primer cap tulo o pista del disco La reproducci n tambi n empieza cerrando manualmente la bandeja del disco o presionando amp OPEN CLOSE Si la reproducci n no comienza autom ticamente presione PLAY gt e Cuando reproduzca un DVD que tenga grabado un men de t tulos el men podr aparecer en la pantalla 5 Presione STOP W para detener la reproducci n MEN DE DISCO DVD V 1 Presione DISC MENU e Aparecer el men principal de DVD Si no existe la funci n puede aparecer el s mbolo en la pantalla de TV Si el men de disco existe en el disco aparecer n el idioma de audio opciones de subt tulo cap tulos para el t tulo y otras opciones para su selecci n 2 Presione A V lt gt para seleccionar un tem y presione ENTER para confirmar la selecci n REANUDACION DVD V CD 1 Durante la reproducci n presione STOP Aparecer el mensaje de continuaci n en la pantalla de TV 2 Presione PLAY gt la reproducci n continuar desde el punto donde se par la reproducci n Para cancelar la continuaci n presione dos veces STOP
16. hit Bl STOP on the unit or on the remote control To show the remaining time hit DISPLAY on the remote control so that OTR appears on the TV screen It will show up momentarily then dis appear Recording stops when the display shows 0 00 Please note that in the SLP mode maximum recording time assuming the tape is started at the beginning is 8 hours using T 160 or 6 hours using T 120 If the tape runs out before the end time the unit will switch to the stop mode immediately ejects the tape and turns itself off Even if POWER is hit during OTR the unit continues recording 1 Select the channel to be recorded Press the Number buttons or CH A V NOTE e If the unit is connected to a cable box or satellite box the unit must be on CH3 or CH4 then the channel to be recorded is selected on the cable box or satellite box 2 Select the tape speed Hit SPEED to select the desired tape speed SP SLP 3 Begin OTR Hit REC OTR on the unit as many times as needed The record ing length will be determined by the number of times you hit REC OTR Each time it is hit Na the recording time will be increased by 30 minutes up to 8 hours OTR 2 30 29 Time s Display Recording length 1 time normal recording 2 times 0 30 30 minutes 3 times 1 00 60 minutes y y y 17 times 8 00 480 minutes COPYING A VIDEO CASSETTE Requires a VCR or camcorder
17. para salida de Utilice un cable digital coaxial de audio disponible en audio en el modo de configura pon La El Mey rcio fe hacer las DA de audio reproducci n en una unidad utilizando ajustes Conexi n a un amplificador equipado con tomas de incorrectos puede generar ruido y distorsi n y entrada digital platina MD o platina DAT tambi n puede provocar da os a los altavoces Consulte la figura 7 de la p gina 14 CONEXI N A UN AMPLIFICADOR ESTEREO EQUIPADO CON TOMAS Consulte la figura 6 de la pagina 13 Fabricado bajo licencia de Dolby NOTAS Laboratories Dolby el s mbolo de la D La fuente de audio de un disco grabado en formato doble son marcas de f brica de Dolby de sonido envolvente Dolby Digital de 5 1 canales Laboratories no se puede grabar como sonido digital mediante una platina MD o DAT Aseg rese de apagar todos los componentes del sistema antes de conectar otro componente Consulte los manuales de instrucciones de los componentes que va a conectar a la unidad Ajuste la funci n DOLBY DIGITAL a PCM para salida de audio en el modo de configuraci n La reproducci n en una unidad utilizando ajustes incorrectos puede generar ruido y distorsi n y tambi n puede provocar da os a los altavoces 5 ES SECCI N DE TV VCR FUNCIONES Y AJUSTES DE TV PARA MIRAR UN PROGRAMA DE TV TV VCR 1 Enchufe el cable el ctrico Enchufe e
18. AUTO RETURN Jeu IN 3 Auto Return will begin When all the timer recordings are completed the unit will rewind to the beginning of the recorded pro gram s NOTE e If you hit POWER while tape is rewinding the Auto Return will stop 4 Watch the recorded program Hit PLAY gt TO CANCEL THE AUTO RETURN MODE Repeat steps 1 to 2 and select OFF using ENTER Even if there is a power failure of any kind the unit will retain its memory for this feature 32 EN ON SCREEN DISPLAY To check the Counter Clock and Channel number on the TV screen hit DISPLAY Each time you hit DIS PLAY the TV screen will change as follows When the Closed Caption mode is OFF When the Closed Caption mode is ON e Counter mode After 5 seconds only the counter e The On Screen Display disappear after 5 seconds remains To clear it hit DISPLAY e This is true even if MUTE or PAUSE Il is e Clock mode After 5 seconds only the clock and pressed while recording the channel number remain To clear them hit DISPLAY OFF mode Counter mode Clock mode OFF mode Clock Counter mode SP COUNT 0 12 34 SP After 5 seconds P After 5 seconds COUNT ortesi 5 40PM CH2 COUNT 0 12 34 Counter E Clock Channe remains i remains CABLE CHANNEL DESIGNATIONS If you subscribe to cable TV the channels are displayed as 1 125 Cable companies often designate channels with letters or letter nu
19. Owner s Manual NE211UD 2 AA Batteries 1EMN20210 e If you need to replace these accessories please refer to the PART NO under the illustrations and call our help line mentioned on the front page e Depending on your antenna system you may need different types of Combiners Mixer or Separators Splitter Contact your local electronics store for these items TABLE OF CONTENTS W IMPORTANT SAFEGUARDS 2 WB PRECAUTIONS 4 LOCATION isset ens 5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE 5 WARNING serans triste 5 SYMBOLS USED IN THIS MANUA Gee hd suruere roue ici S 3 SUPPLIED ACCESSORIES 5 TABLE OF CONTENTS 6 W FEATURES 7 E OPERATING CONTROLS AND 5 9 INSTALLING THE BATTERIES 11 W PREPARATION FOR USE 12 ANTENNA CABLE CONNECTION enr mme 12 CONNECTING TO FRONT A V INPUT JACKS 13 CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGI TAL INPUT JACKS for DVD 13 CONNECTING TO A DOLBY DIGITAL DECODER for DVD 14 TV VCR SECTION E OPERATION AND SETTINGS 15 WATCHING A TV PROGRAM 15 DEGAUSSING 15 PICTURE CONTROL 15 SLEEP TIMER 16 CLOSED CAPTION SYSTEM 16 CHANNEL SET UP 17 CLOCK SET UP AUTO MANUAL 18 DAYLIGHT SAVING TIME 19 V CHIPSETUP 20 TV R
20. SEARCH INDEX SEARCH 3 Exit the caption setting mode Hit SETUP to exit the menu NOTE Even if there is a power failure of any kind the unit will retain its memory for this feature TO CANCEL THE CLOSED CAPTION SYSTEM Repeat steps 1 to 2 and select OFF using ENTER Then hit SETUP to return to TV mode 16 EN CHANNEL SET UP TV VCR Make sure e The unit must be turned on AUTO CHANNEL PROGRAMMING As the initial setting this unit has memorized all channels including the ones not available in your area This feature automatically puts only available channels into the memory 1 Select CHANNEL SET UP Hit SETUP Press A V to point to CHANNEL SET UP then hit ENTER TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER S SET UP V CHIP SET UP LANGUAGE ENGLISH CAPTION OFF ZERO RETURN TIME SEARCH INDEX SEARCH y 2 Begin channel scanning Press A V to point to AUTO CH PROGRAMMING then hit ENTER The tuner scans and memorizes all the active channels in your area CHANNEL SET UP ADD DELETE CH CATV gt AUTO CH PROGRAMMING 3 After scanning The tuner stops on the lowest memorized channel NOTES e When AUTO CH PROGRAM MINC is activated where there is no TV signal input NO TV SIGNALS will appear on the display after the completion of channel scanning The unit may recognize CATV chann
21. Warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug the unit from the wall outlet before clean ing Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning EXCEPTION A product that is meant for uninterrupted service and that for some specific reason such as the possi bility of the loss of an authorization code for a CATV con verter is not intended to be unplugged by the user for clean ing or any other purpose may exclude the reference to unplugging the appliance in the cleaning description other wise required in item 5 6 Attachments Do not use attachments not recommended by the unit manufacturer as they may cause hazards 7 Water and Moisture Do not use this unit near water for example near a bath tub wash bowl kitchen sink or laun dry tub in a wet basement or near a swimming pool and the like 8 Accessories Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury to someone and serious damage to the appli ance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the unit Any mounting of the appliance should follow the manufacturer s instructions and should use a mount ing accessory recommended by the manufacturer An appliance and cart combinat
22. allows you to prevent discs with alterna tive scenes from being played by your children PARENTAL LEVEL Parental Level allows you to set the rating level of your DVD discs Playback will stop if the disc s rat ings exceed the level you set Follow steps 1 to 2 in the CUSTOM MENU sec tion on page 42 3 Enter your four digit password then hit ENTER SETUP PARENTAL PASSWORD Enter current password 4 Press A V to select PARENTAL LEVEL then hit ENTER M PARENTAL LEVEL ALL PASSWORD CHANGE 5 Press A V to select the desired level then hit ENTER SETUP PARENTAL PARENTAL LEVEL AL 8 7 NC 17 6 R 6 Hit SETUP to exit the menu NOTES e When doing this for the first time enter any 4 digits except for 4737 That number will be used as the pass word in the event you forget the password see below To change the password press A W to select PASSWORD CHANGE at step 4 then hit ENTER Enter the four digit password then hit ENTER e With some DVDs it may be difficult to find if they are compatible with parental lock Be sure to check if the parental lock function operates in the way that you have set e Record the password in case you forget it CONTROL LEVELS e ALL All parental lock is cancelled e Level 8 DVD software of any grade adult general childre
23. discs which bear the marks above If you use nonstandardized discs this unit may not play them back Even if they are played back the sound or video quality will be compromised 6 You may play back the unfinalized DVD R RW disc recorded in the video format on our brand s DVD recorder However depending on the recording status of a disc the disc may not be played back at all or normally the picture or sound may not be smooth etc In this case you need to finalize the disc with the DVD recorder Refer to the manual accompanying the DVD recorder 7 Only the discs recorded in the video format and finalized can be played back Unfinalized discs cannot be played back Depending on the recording status of a disc the disc may not be played back at all or normally the picture or sound may not be smooth etc 8 If there is too much recording space left on a disc the used portion is less than 55mm across it may not play back properly 9 Do not glue paper or put stickers on to the disc These may damage the disc and the unit may not read it correctly 10 The number inside the symbol refers to a region of the world and a disc encoded in a specific region for mat can only be played back on unit with the same region code RW This label indicates playback compatibility with DVD RW discs recorded in VR mode Video Recording Format COMPATIBLE NOTE This player cannot play the DVD RW that supports CPRM Contents Protection for Record
24. makes it possible to quick ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip NOTE e Time Search can be set up to a maximum of 9 hours 50 minutes 9 50 by 10 minutes at a time In the example below To watch a program before after 2 hour 50 minutes from the present position in either direction TVNCR SETUP 1 Select TIME SEARCH mme Hit SETUP ee Press A W to point to TIME LANGUAGE SEARCH then hit ENTER LANGUAGE ENGLISH CAPTION OFI ZERO RETURN TIME SEARCH INDEX SEARCH 2 Enter your desired time Press A W until your desired time appears Example 2 50 stands for 2 hours 50 minutes If you wish to cancel the Time Search at this point hit SETUP 3 Begin Time Search By pressing 4 gt gt the unit will rewind or fast for ward to the specified point The time counts down during the search When the display shows 0 00 the tape will start playback automatically TO CANCEL DURING TIME SEARCH Press B 4 STOP EJECT on the unit or STOP W This will delete the selected time 25 EN INDEX SEARCH TV VCR This feature provides a method of indexing the start ing point so that it can be easily returned to in either fast forward or rewind mode e The index mark will be made automatically when RECORD is hit It will also be marked at the starting point of Timer recording a
25. may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encouraged to try to correct the interfer ence by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a cir cuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help LASER SAFETY This unit employs a laser Only a qualified service person should remove the cover or attempt to ser vice this device due to possible eye injury CAUTION USE OF CONTROLS OR ADJUST MENTS OR PERFORMANCE OF PROCE DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED DO NOT STARE INTO BEAM LOCATION INSIDE NEAR THE DECK MECHANISM This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est con forme la norme NMB 003 du Canada CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR VITER LES CHOCS LECTRI
26. switched to the TV VCR mode the DVD mode shuts down first and then the TV picture and sound appears in about 4 sec onds Similarly when POWER is hit to turn off in the DVD mode this mode shuts down first and then the unit is turned off A prohibited icon may appear at the top right on the TV screen dur ing operation warning that a pro hibited operation has been encoun tered by the DVD or the disc e With DVDs that use titles for playback program sig nals playback may start from the second title or it may skip these titles e During the playback of a two layered disc pictures may stop for a moment This happens when the 1st layer switches to the 2nd layer This is not a mal function 35 GENERAL FEATURES DVD V DVD may contain menus to navigate the disc and access special features Press the appropriate Number buttons or A V lt P gt to highlight your selection in the DVD main menu and hit ENTER to confirm NOTES e Select DVD mode by hitting SELECT then oper ate the DVD functions Unless stated all operations described are based on remote control use Some operations can be carried out using the menu bar on the TV screen DISC MENU DVD V 1 Hit DISC MENU e The DVD main menu will appear e If the feature is not available O symbol may appear on the TV screen e If disc menu is available on the disc audio language subtitle options chapters for
27. the title and other options will appear for selection 2 Press A v lt P gt to select an item and hit ENTER to confirm selection TITLE MENU DVD V 1 Hit TITLE e The title menu will appear e If the feature is not available O symbol may appear on the TV screen 2 Press A V 4 P to select an item and hit ENTER to confirm selection CALLING UP A MENU SCREEN DURING PLAYBACK e Hit DISC MENU to call up the DVD menu e Hit TITLE to call up the title menu NOTE e Contents of menu and corresponding menu opera tions may vary between discs Refer to the manual accompanying the disc for details EN RESUME CD DVD V 1 During playback hit STOP W e Resume message will appear on the TV screen 2 Hit PLAY gt playback will resume from the point at which playback was stopped e To cancel resume hit STOP W twice e The resume information stays on even when the power is turned off PAUSE CD DVD V 1 During playback hit PAUSE II e Playback will pause and sound will be muted 2 To continue playback hit PLAY gt STEP BY STEP PLAYBACK DVD V 1 During playback hit PAUSE 11 e Playback will pause and sound will be muted 2 The disc goes forward by one frame each time PAUSE 11 is hit 3 To exit step by step playback hit PLAY gt FAST FORWARD FAST REV ERSE DVD V
28. the unit will start playback automatically A video cassette must be inserted in the unit for this function to work The number of Index Searches can be set up to 20 e This function will not operate in the recording mode e When you want to cancel the Index Search while in progress hit STOP W 26 EN SPECIAL FEATURES REAL TIME TAPE COUNTER AUTO REWIND EJECT TV VCR TV VCR This shows the elapsed recording or playback time in When the end of a tape is reached during record hours minutes and seconds The displayed time will ing playback or fast forward the tape will auto not change on a blank tape or blank portions on the matically rewind to the beginning After rewinding tape The indication will appear when the tape has finishes the unit will eject the tape and turn itself rewound further than 0 00 00 on the tape counter off e This function is operative when Repeat Play is set to the OFF position e The tape will not auto rewind during timer record ing or One Touch Recording 297 EN RECORDING Make sure e The unit must be turned on e Insert a cassette tape with its erase prevention tab in place If necessary rewind or fast forward the tape to the point at which you want to begin recording NOTES e This unit will ONLY record and view the same channel e This unit cannot record the contents from the built in DVD NORMAL RECORDING SKIPPING UNWANTED
29. vibrate vertically stabilize the picture by pressing CH A v NOTE e f there are video noise lines on the screen refer to TRACKING ADJUSTMENT on this page EN SPECIAL PLAYBACK Make sure e The unit must be turned on e Insert a prerecorded tape RENTAL PLAYBACK TV VCR This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes TVNCR SETUP 1 Select USER S SET UP Hit SETUP SETTING oven S Press A V to point to USER S o SET UP then hit ENTER CAPTION OFF ZERO RETURN TIME SEARCH INDEX SEARCH USER S SET UP 2 Set RENTAL to ON Press A W to point to RENTAL Hit ENTER until ON appears 14 RENTAL ON REPEAT PLAY OFF AUTO RETURN 3 Exit the Rental setting Hit SETUP to return to the TV mode 4 Start playback Hit PLAY gt to start playback RENTAL PLAY appears Once you select the rental mode it stays in effect even after you turn off the unit TO CANCEL THE RENTAL MODE Repeat steps 1 to 2 and select OFF using ENTER Hit SETUP to return to TV mode Even if there is a power failure of any kind the unit will retain its memory for this feature AUTO REPEAT PLAYBACK TV VCR The unit has the auto repeat function that allows you to repeat a tape indefinitely without hittin
30. you continue watch ing TV TIMER REC STANDBY starts flashing on the TV screen 2 minutes before the programmed start time e If the erase prevention tab is removed the cassette will be ejected when POWER is hit to off 231s NOTES e The display will not be turned on automatically at the time the programmed recording begins To watch the currently recorded TV program or to play a DVD disc hit POWER and SELECT to choose the TV VCR mode or the DVD mode e If the tape runs out before the end time the unit will switch to the stop mode immediately and the tape will be ejected TIMER PROGRAM EXTENSION To shift the time schedule of an automatic timer recording 1 Hit POWER 2 Repeat step 7 on page 30 3 Hit RECORD and select the desired program using A V 4 Hit RECORD again Each additional push will shift forward the begin end time for recording by 10 minutes When the recording is already in progress each additional push will shift forward the end time only If you want to cancel while setting hit PAUSE on the remote control The recording time returns to the original time NOTE When you shift forward the time schedule during recording the recording speed will automatically be set to the SLP mode 5 Press ENTER or RETURN to exit the setting menu Then hit SETUP to return to original mode TO CORRECT A PROGRAM e While setting a program hit lt 4 to go back one step and ent
31. 0AM 12 00PM 9 00AM 10 00AM 11 00AM 12 00PM Recording period is SHADED 7 Select TIMER PROGRAMMING Hit SETUP Confirm TIMER PROGRAM MING is pointed by hitting then hit ENTER e If you have not yet set the clock MANUAL CLOCK SET appears If so follow steps 3 to 8 on page 18 Then set the timer record ing TVNCR SETUP P TIMER PROGRAMMING INDEX SEARCH 2 Select your desired program position 1 to 8 Press A W to select the desired TIMER PROGRAMMING program position then hit gt CH DATE BEGIN END Sa TIMER PROGRAMMING CH DATE BEGIN END 3 Set the channel number Press A W until the desired channel number appears Example CH61 then hit gt g NOTE e If the unit is connected to a cable box or satellite box the unit must be on CH3 or CH4 then the channel to be recorded is selected on the cable box or satellite box 4 Select once every day or weekly recording For once recording Hit A until the desired date appears Example 7 04 for July 4th Then hit P gt TIMER PROGRAMMING CH DATE BEGIN END For every day recording To record a TV program at the same time on the same channel every day Example Monday through Sunday Hit W until EVRY DAY appears then hit gt TIMER PROGRAMMING CH DATE BEGIN END For weekly recording To record a TV program at the same time on t
32. ARCH Hit v to select AUTO CLOCK SETTING CLOCK CH SE ARCH AUTO CLOCK ON Then hit ENTER pes e The unit begins searching for the station which contains the auto DST OFF clock set signal The search for a signal may take up to 20 seconds per channel When the search has ended _ _ appears at the lower left of the screen Write down the number s that appear on the screen They are the auto clock station s in your area If no number s appear on the TV screen there are no stations in your area which contain the Auto Clock signal Auto Clock Setting is not possible Please use Manual Clock Setting on page 18 AUTO CLOCK CH SEARCH 08 10 13 NOTE e During AUTO CLOCK CH SEARCH the picture may be distorted 19 4 Enter the channel number that contains the Automatic Clock Setting Signal Hit RETURN to go back to SETTING CLOCK menu Hit V to select AUTO CLOCK CH SETTING CLOCK AUTO CLOCK ON AUTO CLOCK CH SEARCH P AUTOCLOCKCH 45 MANUAL CLOCK SET DST OFF Press lt 4 gt until you locate Auto Clock Set station number 5 Exit the setting clock mode Hit SETUP to exit the menu NOTE Once the unit is turned off it will periodically check and set the correct date and time DAYLIGHT SAVING TIME TV VCR Select this feature and the unit s clock automatically will advance one hour in April then reverse one hour in October
33. ATING SETUP 20 MPAA RATING SETUP 21 CHANGE ACCESS CODE 21 MENU LANGUAGE 21 W VIDEO CASSETTE 22 BPLAYBACK 23 NORMAL PLAYBACK 23 TRACKING ADJUSTMENT 23 SLOW MOTION 23 STILL PICTURE es 23 VERTICAL HOLD CONTROL 23 B SPECIAL PLAYBACK 24 RENTAL PLAYBACK 24 AUTO REPEAT PLAYBACK 24 B SEARCH wise cave sce RI me 25 ZERO RETURN 25 PICTURE SEARCH 25 TIME SEARCH 25 INDEX SEARCH 26 B SPECIAL FEATURES 27 REAL TIME TAPE COUNTER 27 AUTO REWIND EJECT 27 B RECORDING 28 NORMAL RECORDING 28 SKIPPING UNWANTED SCENES DURING RECORDING 28 OTR One Touch Recording 29 COPYING A VIDEO CASSETTE Requires a VCR or camcorder 2 BW TIMER RECORDING 30 AUTOMATIC TIMER RECORDING 30 AUTO RETURN IG 32 ON SCREEN DISPLAY 33 E CABLE CHANNEL DESIGNATIONS 33 DVD SECTION B ABOUT THE DISCS 34 PLAYABLE DISCS 34 UNPLAYABLE DISCS 34 B PLAYING A DISC 35 BASIC PLAYBACK 35 GENERAL FEATURES 35 DISC MENU sie RR Reg 35 TITLE MENU soi ci ane 35 RESUME 36 PAUSE area aon si 36 STEP BY STEP PLAYBACK 36 FAST FORWARD FASTREVERSE 36 SLOW FORWARD
34. C ON DOWNSAVPUNG DOLBY DIGITAL BITSTREAM DOWN SAMPLING DRC Dynamic Range Control e To compress the range of soft to loud sound J e The default setting is ON SETUP AUDIO e ON Output in 48 kHz default e OFF Output the original sound When playing disc with copyright Protection elf you select OFF copyright protection will be activated and sound will be down sampled at 48kHz DOWN SAMPLING ON DOLBY DIGITAL BITSTREAM gt DOLBY DIGITAL QUICK Set to BITSTREAM when ped SAMPLING ON dis anitiscamested toa DOLBY DIGITAL BITSTREAM Dolby Digital Decoder e BITSTREAM Output a Dolby Digital signal default e PCM Convert the Dolby Digital to PCM 2 channel stereo 4 Hit SETUP to exit the menu QUICK MENU You can select the TV MODE or DOLBY DIGITAL from the QUICK menu quickly To access the QUICK menu select QUICK instead of CUSTOM at step 1 on page 42 LANGUAGE SETTING FOR THE ON SCREEN MENUS You can access the TV VCR SETUP menu by hitting SETUP from the DVD mode Refer to MENU LANGUAGE on page 21 to change the language for the on screen menus 43 EN D PARENTAL CONTROL Parental Control limits the disc viewing that exceed your setting with a password or playback will stop This feature
35. DIO VIDEO de la parte delantera de la Digital de 5 1 canales la unidad emitir un flujo de unidad datos DOLBY DIGITAL desde su toma AUDIO Conecte las tomas de salida de audio v deo de otra OUT COAXIAL Si conecta la unidad a un fuente a las tomas AUDIO L R y VIDEO de esta decodificador Dolby Digital podr disfrutar de una unidad tonalidad m s convincente y real con un sonido Despu s presione SELECT o CH A W hasta envolvente potente y de alta calidad similar al de los que aparezca AUX en la pantalla cines Utilice cables digitales coaxiales de audio Consulte la figura 5 de la p gina 13 disponibles en el comercio para hacer las conexiones de audio NOTA e Cuando conecte una videograbadora monof nica otra fuente a esta unidad conecte la toma de salida de audio de la videograbadora monof nica otra fuente a la toma AUDIO L de esta unidad El NOTAS audio saldr igualmente por los canales izquierdo y Aseg rese de apagar todos los componentes del derecho sistema antes de conectar otro componente e Consulte los manuales de instrucciones de los componentes que va a conectar a la unidad e Si conecta un decodificador Dolby Digital ajuste la funci n DOLBY DIGITAL a BITSTREAM para salida de audio en el modo de configuraci n e A menos que se haga la conexi n un DE ENTRADA DIGITAL para DYD decodificador Dolby Digital ajuste la funci n T Ww DOLBY DIGITAL a
36. IFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE To locate your nearest FUNAI Authorized Service Center or for general service procedure please call or write to the following FUNAI CORPORATION INC SERVICE CENTER 19900 Van Ness Avenue Torrance CA 90501 Tel 1 800 256 2487 http www EmersonAudioVideo com Head Office 100 North Street Teterboro NJ 07608 PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS Printed in Malaysia 1EMN20210 TO101UB KKK
37. L to PCM for audio output in the setup mode Playing a unit using incorrect set tings may generate noise distortion and may also damage the speakers Refer to page 43 13 EN CONNECTING TO A DOLBY DIGITAL DECODER for DVD If using this unit to play a DVD disc in a 5 1 channel Dolby Digital surround format the unit outputs a DOLBY DIGITAL Data stream from its AUDIO OUT COAXIAL jack By hooking the unit up to a Dolby Digital decoder you can enjoy a more convincing realistic ambience with powerful and high quality surround sound as enjoyed in movie theaters Use audio coaxial digital cables commercially available for the audio connections k Front speaker pe Front speaker OUT left right To AUDIO OUT COAXIAL jack To Coaxial digital Only DVD AUDIO OUT Audio input jack Surround Surround Subwoofer IN Audio coaxial digital cable speaker speaker 4 left right commercially available Fig 7 NOTES e Be sure to turn off the power to all components in the system before connecting another component e Refer to the Owner s Manuals for the components to be connected to the unit If connected to a Dolby Digital decoder set DOLBY DIGITAL to BITSTREAM for audio output in the setup mode Refer to page 43 Unless connected to a Dolby Digital decoder set DOLBY DIGITAL to
38. LE OR SATELLITE CHANNEL e f the unit is connected to a cable box or satellite box press CH A V to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device TO WATCH EXTERNAL INPUT When an external equipment is connected to the front AUDIO VIDEO input jacks press SELECT or CH A V repeatedly until AUX appears on the screen DEGAUSSING TV VCR This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by any excess magnetism which happens to get too close to the TV This circuit is designed to operate once when the set is first plugged in If minor color errors are seen in some locations on the screen please unplug the TV for approximately 30 min utes When the TV is plugged back in the degauss ing circuit will operate once to clear them up Repeat this procedure any time the TV screen is accidentally magnetized or when the TV is moved or relocated PICTURE CONTROL TV VCR The unit s picture controls BRIGHT CON TRAST COLOR TINT and SHARPNESS are preset to factory specifications Although they are usually the best you may need to make some further adjustments for a more natural looking image Make sure e The unit must be turned on 1 Call up the menu Hit PICTURE 2 Select item you want to adjust Press A V until desired control is displayed BRIGHT
39. N 54 SECCI N DE DVD REPRODUCCI N B SICA 55 MENU DE DISCO corsi uox pee EGER ERROR 55 REANUDACI N 00 00 ens 55 CONTROLES DE OPERACI N Y FUNCIONES Consulte la figura 1 de la p gina 9 para el panel frontal de la unidad Consulte la figura 2 de la p gina 9 para el mando a distancia Consulte la figura 3 de la p gina 10 para la vista posterior 1 Bot n POWER Presione para encender y apagar la unidad 2 Botones VOLUME VOL a v Presione para controlar el nivel de volumen del DVD y el televisor 3 Botones SKIP 44 gt gt I para DVD Presione una vez para omitir cap tulos o pistas y desplazarse a un punto espec fico Botones SEARCH lt lt gt gt para DVD Mantenga el bot n presionado para cambiar la velocidad de reproducci n en avance o retroceso 4 Bot n gt PLAY Inicia la reproducci n del contenido del disco o cinta 5 Bot n STOP Panel frontal Detiene la operaci n del disco Mando a distancia Detiene la operaci n del disco o el casete 6 Bot n 4 OPEN CLOSE Presione para insertar un disco en la bandeja o retirarlo de ella Bandeja de carga del disco Indicador DVD Se ilumina durante el modo DVD 9 Bot n SELECT Presione para cambiar al modo TV VCR modo de entrada externa o modo de DVD El modo seleccionado TV VCR o DVD se visualiza en el indicador del panel delantero 10 Indicador TV VCR Se ilumina durante el
40. QUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND A NOTE ABOUT RECYCLING Batteries should never be thrown away or inciner ated but disposed of in accordance with your local regulations concerning chemical wastes The serial number of this product may be found on the back of the unit No other unit has the same serial number as yours You should record the number and other vital information here and retain this book as a per manent record of your purchase to aid identification in case of theft Serial numbers are not kept on file Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No Model No Serial No LOCATION WARNING For safe operation and satisfactory performance of Moisture condensation may occur inside the unit your unit keep the following in mind when selecting When it is moved from a cold place to a warm place a place for its installation or after heating a cold room or under conditions of e Shield it from direct sunlight and keep it away from high humidity If a DVD is played in a unit which has sources of intense heat moisture it may damage the DVD and the unit Therefore when the condensation occurs inside the unit turn the unit on and allow at least 2 hours for the unit to dry out e Avoid dusty or humid places Avoid places with insufficient ventilation for proper heat dissipation Do not block
41. TEXT mode You can watch half screen text informa tion if you want 1 2 You may get these captions or text information by selecting either 1 or 2 Caption 2 is usually used for a second language if available NOTES e Not all programs are broadcast with closed cap tions Your unit is designed to provide error free closed captions from high quality antenna cable and VCR signals Conversely poor quality signals are likely to result in caption errors or no captions at all Common signal conditions which may cause caption errors are listed below e Automobile ignition noise e Electric motor brush noise e Weak snowy reception on TV screen e Multiplex signal reception displaying picture ghosts or airplane flutter e Playback of poorly recorded or worn VCR tapes e If the unit displays a black box on the TV screen this means that the unit is set to the TEXT mode To clear screen select CAP TION1 CAPTION2 or OFF Make sure e The unit must be turned on 1 Select CAPTION Hit SETUP Press A V to point to CAP TION TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP IE SEARCH INDEX SEARCH 2 Select your desired caption mode Hit ENTER repeatedly until your SETUP desired caption menu appears SEINA cLock S CAPTION1 CAPTION2 TEXT1 or TEXT2 SET UP LANGUAGE ENGLISH CAPTION CAPTION1 ZERO RETURN TIME
42. TOP once and then PLAY gt again playback will restart from the point where STOP was hit Program continued e Hit STOP M twice and then PLAY gt again playback will restart from the track in the usual way Program canceled e Up to 99 tracks can be entered To erase all tracks in the program at once select ALL CLEAR at the bottom of the list at step 2 e If you like to repeat the current track in the program hit REPEAT several times until TRACK appears during playback If you like to repeat the entire program hit REPEAT several times until IG ALL appears during playback RANDOM PLAYBACK CD This function shuffles the playing order of tracks instead of playback in the sequence 1 In the stop mode hit MODE twice e RANDOM screen appears 2 Hit PLAY gt to start random playback NOTE elf you like to repeat the current track in the random selection hit REPEAT several times until S TRACK appears during playback If you like to repeat the entire random selection hit REPEAT sev eral times until ALL appears during playback EN CHANGING THE SETTINGS SUBTITLE LANGUAGE DVD V The unit allows you to select a language for subtitles during DVD disc if available playback 1 Hit SUBTITLE during playback e The subtitle language will appear on the displ
43. V RATING SET UP Follow steps 1 to 3 in the V CHIP SET UP sec tion above 6 Exit the V Chip setting mode 4 Blocking TV programs Hit SETUP to exit the menu Press A V to select a rating that ME NOTE you wish to block me To change the rating the TV must Hit ENTER repeatedly to set it to be turned to an unprotected pro PROTECTED PROGRAM BLOCK or VIEW gram If PROTECTED PRO Rating Category Explanations GRAM by appears on the Appropriate for all children screen please change the channel Appropriate for children seven and older A OS General Audience Parental Guidance suggested Unsuitable for children under 14 Mature audience only 20 EN MPAA RATING SET UP Follow steps 1 to 3 in the V CHIP SET UP section on page 20 4 Select your desired item Press A W to point to your desired item then hit ENTER to select BLOCK or VIEW General Audience Parental Guidance suggested Unsuitable for children under 13 Restricted under 17 requires accompa nying parent or adult guardian No one under 17 admitted Mature audience only When you select a rating and set it to BLOCK the higher ratings will be blocked automatically The lower ratings will be available for viewing When you set the lowest rating to VIEW all other ratings will automatically be available for viewing 5 Exit the V Chip setting mode Hit SETUP t
44. W e La informaci n de continuaci n permanece activada incluso cuando apaga el interruptor principal 5 ES Emerson LIMITED WARRANTY FUNAI CORP will repair this product free of charge in the USA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Two 2 years for Picture Tube Certain parts are excluded from this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS This warranty is extended only to the original retail purchaser A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unauthorized service center This FUNAI CORPORATION Limited warranty does not apply to any product not purchased and used in the United States This warranty only covers failures due to defects in material or workmanship which occurs during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or product no
45. a selecci n de los canales deber hacerse con la caja de convertidor o con la caja de sat lite Esto significa que no es posible cambiar de canal utilizando el mando a distancia de la unidad Nota para el instalador de sistemas CATV Esta nota tiene la finalidad de llamar la atenci n del instalador de sistemas CATV para que tenga en cuenta el Art culo 820 40 de la NEC que proporciona recomendaciones para hacer una conexi n a tierra apropiada y en particular especifica que la tierra del cable debe conectarse al sistema de puesta a tierra del edificio tan cerca del punto de entrada del cable como sea posible NOTA Antes de enchufar la antena a la toma ANT de la unidad compruebe que la clavija no est doblada en la ilustraci n y luego con ctela en la toma ANT de la unidad Clavija doblada Y Cable Clavija Necesita enderezarse Clavija derecha Si esta doblada p ngala derecha como se muestra NOTA e Para su seguridad y para evitar que se da e la unidad desenchufe el cable de antena de la toma ANT antes de mover la unidad 51 CONEXION A TOMAS DE CONEXION A UN DECODIFICADOR ENTRADA DELANTERAS DOLBY DIGITAL para DVD Cuando vea un programa grabado en otra fuente Si utiliza esta unidad para reproducir un disco DVD videograbadora o videoc mara utilice las tomas de grabado en formato de sonido envolvente Dolby entrada AU
46. able Media This player cannot play the DVD R discs recorded in VR mode Video Recording Format UNPLAYABLE DISCS e NEVER play back the following discs Otherwise malfunction may result DVD RAM CD I Photo CD Video CD DVD with region codes other than 1 or ALL DTS CD DVD ROM for personal computers CD ROM for personal computers MP3 e On the following disc the sound MAY NOT be heard Super Audio CD NOTE Only the sound recorded on the normal CD layer can be delivered The sound recorded on the high density Super Audio CD layer cannot be delivered e Any other discs without compatibility indications 22732 25 EN PLAYING A DISC BASIC PLAYBACK DVD V CD Getting started e Turn on the power of amplifier and any other com ponents if necessary 1 Hit POWER e The power will turn on 2 Hit 4 OPEN CLOSE to open disc loading tray 3 Place the chosen disc in the tray with the label facing up 4 Hit PLAY gt e The tray will close automatically and playback will then start from the first chapter or track of the disc eClosing the disc tray manually or by hitting 4 OPEN CLOSE also starts playback elf the playback does not start automatically hit PLAY gt e When you playback a DVD which features a title menu it may appear on the screen In this case refer to TITLE MENU on this page 5 Hit STOP to stop playback NOTES e When the DVD mode has been
47. ack of the cassette until it is drawn into the unit The unit will automatically turn on Window A C I CORRECT REMOVING A CASSETTE 1 In the stop mode hit B 4 STOP EJECT on the unit The cassette will be ejected 2 Pull the cassette out of the cassette compartment 3 Store the cassette in its case as shown lt a ZA ERASE PREVENTION You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette If you decide to record on the tape again cover the hole with plastic tape Plastic Tape NOTE e In DVD mode whether the cassette is with tab or without tab you insert it doesn t start playing until you hit gt PLAY In TV VCR mode if the cassette without tab is inserted playback will automatically start 22 PLAYBACK NORMAL PLAYBACK TV VCR Make sure e The unit must be turned on 1 Insert a prerecorded tape If the erase prevention tab has been removed the unit will start ee ee automatically NOTES Even in the DVD mode you can start the VCR playback if you hit gt PLAY of the TV VCR side VCR playback will stop and the mode will change to the DVD mode by pressing SELECT gt PLAY DVD side or amp OPEN CLOSE TRACKING ADJUSTMENT TV VCR e Tracking adjustment will be set automatically Digital Tracking function when you start play back e Noise
48. ay bar at the top of the TV screen 2 Hit SUBTITLE repeatedly to select your desired subtitle language To turn off subtitles hit SUBTITLE repeat edly until OFF appears NOTES e Hitting SUBTITLE may not work on some DVDs with multiple subtitle languages In this case set it on the disc menu Operation varies between discs Refer to the manual of the disc elf the desired language is not shown after hitting SUBTITLE several times the disc does not have subtitles in that language NOT AVAILABLE appears on the TV screen it LE means no subtitle is recorded on the scene code the code will be displayed every time you change the Subtitle language setting If you choose any other languages will be displayed instead e When NOT AVAILABLE e If you choose a language that has a 3 letter language Refer to page 42 39 E AUDIO LANGUAGE DVD V The unit allows you to select a language during DVD disc if multi languages are available playback 1 Hit AUDIO during playback 1 ENG Dolby D 3 2 1 48 3 2 Hit AUDIO repeatedly to select your desired language NOTE e Hitting AUDIO may not work on some DVDs with multiple audio languages e g DVDs which allow audio language setting on the disc menu STEREO SOUND MODE CD 1 Hit AUDIO repeatedly during playback to select between STEREO L ch or R ch ez STEREO e STEREO bo
49. ccione el d a Presione A V hasta que aparezca el d a deseado Ejemplo 62 06 Presione gt 53 ES 5 Seleccione el Presione A V hasta que aparezca el a o deseado Ejemplo 2005 Presione gt 6 Seleccione la hora Presione A W hasta que aparezca la hora deseada Ejemplo 5 Presione gt 7 Seleccione los minutos Presione A W hasta que aparezcan los minutos deseados Ejemplo 40 8 Haga funcionar el reloj Presione SETUP Aunque no aparezcan los segundos empezar a contar desde 00 cuando presione SETUP Utilice esta caracter stica para sincronizar el reloj con la hora real GRABACI N GRABACI N NORMAL TV VCR SOLO puede ver el mismo programa que se est grabando 1 Seleccione el canal a grabar Presione los botones num ricos o CH A V NOTA e Si la unidad est conectada a una caja de cable o caja de sat lite la unidad debe estar en CH3 o CH4 y debe seleccionarse el canal a grabar en la caja de cable o caja de sat lite 2 Seleccione la velocidad de la cinta Presione SPEED para seleccionar la velocidad de cinta deseada SP SLP 3 Empiece a grabar Presione RECORD 4 Pare la grabaci n Presione STOP W SECCI N DE DVD REPRODUCCION BASICA DVD V CD Para empezar Conecte la alimentaci n del amplificador y otros componentes si es necesario 1 Presione POWER
50. cture across the screen 4 To exit zoom mode hit ZOOM to OFF NOTES e Zooming function does not work while disc menu is shown e Zooming function is not available on some discs e t may take several seconds to slide the zoomed pic ture e picture may be distorted if you operate other functions repeatedly ex PAUSE If or lt 4 etc in the zoom mode SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track Using the Number buttons 1 Press the Number buttons to enter the desired track number e Playback will start at the selected track For single digit tracks 1 9 press a single number eg track 3 hit 3 e To play track 26 hit 10 2 6 Using SEARCH MODE 1 Hit SEARCH MODE The track search display appears 2 Within 30 seconds select the desired track number using the Number buttons For single digits hit 0 first if the total track of the disc is 10 tracks or more Playback will start at the selected track Using H4 PP During playback hit gt gt to move the next track Hit it repeatedly to skip subsequent tracks Hit 19 to go back to beginning of the current track Hit it repeated ly to go to the previous tracks elf lt PPI is pressed while the playback is paused the playback will be paused again after skip ping to the next track NOTE de PPI are not ope
51. dition 22 Heat This unit product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat EN PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying broadcasting public perfor mance and lending of discs are prohibited This product incorporates copyright protection tech nology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise autho rized by Macrovision Reverse engineering or dis assembly is prohibited FCC WARNING This equipment may gener ate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction man ual The user could lose the authority to oper ate this equipment if an unauthorized change or modification is made RADIO TV INTERFERENCE This equipment has been tested and found to com ply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions
52. e appears VIEW all other ratings will automatically be on the TV screen available for viewing V CHIP SET UP 5 Setting Sub Ratings Ay Make s aa When you select the ratings of TV e The unit must be turned TV 14 TV MA you YS ew will have the option of setting sub 1 Select V CHIP SET UP Qa Tating categories Hit SETUP TIMER PROGRAMMING Press A V to select a rating with 7 USERS SETUP sub ratings you wish to block then ress A V to select V CHIP usm hit ENTER twi SET UP then hit ENTER ais d ad TIME STARCH Press A W to select a sub rating AH then hit ENTER to set it to BLOCK or VIEW 2 Enter Access code ACCESS CODE TV PG BLOCK Press the Number buttons to gt proc enter the access code Pa 1 v e For the first time set up or in the event the unit has lost power kJ enter the default code of 0000 TV Y7 3 Select the desired item FV Fantasy Violence Press A Y to select TV RATING MPAA RAT TV PG TV 14 TV MA ING or CHANGE CODE then hit ENTER Suggestive Dialog TV PG TV 14 only Refer to the pages below to set up each item Coarse Language V CHIP SET UP Sexual Situation P 20 Al Step 4 Violence MATE P 21 B Step 4 P 21 C Step 4 NOTE e The blocked sub ratings will appear next to the rating category in the TV RATING menu proce T
53. e below the timer is being set to record DATE July 4th 2005 SETTING TIME from 7 30PM to 8 50PM CHANNEL CH61 TAPE SPEED SP Make sure e If a cable box or satellite box is connected with the unit you will be limited to record only one channel and the channel selector on the unit must be select ed to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes Clock must be set to the correct time and date before setting the timer The unit must be turned on to program it Insert a cassette tape with its erase prevention tab in place If necessary rewind or fast forward the tape to the point at which you want to begin recording The channel you want to record is properly set in advance Refer to page 17 Avoid overlap of programs There is a chance that a program will not be record ed when programs overlap e The program with an earlier start has priority Once the earliest program finishes the overlapping programs will begin recording in sequence e When the starting time is the same the program set on the highest position in the program list has pri ority e The illustration below demonstrates the sequence of recordings Program 1 10 00AM 11 00AM Program 2 9 00AM 10 00AM Program 3 9 30AM 12 00PM Recording Sequence Program 1 10 00AM 11 00AM Program 2 00 sowie E 9 3
54. e sure the AC cord is connected to an AC outlet e Check antenna connection e Hit SELECT to select TV mode Then try other TV feature e Let the unit program its tuner memory No picture or poor picture on the Adjust direction or replace antenna unit Adjust picture controls Check for broken pin of the antenna cable No sound or poor sound e Adjust volume control on remote control or main unit e Hit MUTE to restore sound Bars On Screen e If outside antenna is being used check for broken wire Check for local interference Picture Distorted or Blurred e Try a new channel if OK then possible station trouble e If outside antenna is being used check for broken wire Picture Rolls Vertically e Try a new channel if OK then possible station trouble Lines or Streaks in Picture e If outside antenna is being used check for broken wire Check for local interference No Color e Try a new channel if OK then possible station trouble e s antenna connected to jack on the back of the set If outside antenna is being used check for broken wire e Adjust COLOR control Poor Reception on Some Channels e Try a new channel if OK then possible station trouble Ghosts in Picture e s antenna connected to jack on the back of the set e If outside antenna is being used check for broken wire Check for local interference Weak Picture e Try a new channel if OK then possible station trouble e s antenna connec
55. eared when moving to other track e Repeat playback does not function during A B repeat playback A B REPEAT DVD V CD 1 Hit A B at your chosen starting point 16 A appears briefly on the TV screen 2 Hit again at your chosen end point A B appears briefly on the TV screen and the repeat sequence begins 3 To exit the sequence hit NOTES e The A B repeat section can only be set within the cur rent title for DVDs or current track for Audio CDs A B repeat is not available with some scenes in DVD e To cancel the A point which was set hit CLEAR A B repeat playback does not function during title chapter track or all repeat playback 38 PROGRAM CD You may determine the order in which tracks will play 1 Inthe stop mode hit MODE e The PROGRAM screen will appear 2 Press A V to select a track then hit ENTER eHit CLEAR to erase the most recently entered track elf the entire Program cannot be displayed at once on a screen bp appears to go to the next page and 1 appears to go back to the previous page 3 Repeat step 2 until you have selected all the tracks you want to play in the program 4 Hit PLAY gt to play the programmed tracks NOTES e While the program is being played back hitting STOP Bl works as follows e Hit S
56. ed to operate from battery power or other sources refer to the operating instructions 11 Grounding or Polarization This unit is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try revers ing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying par ticular attention to cords at plugs convenience receptacles and the point where they exit from the appliance EN FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA L LEAD IN WIRE ELECTRIC SERVICE EQUIPMENT NEC NATIONAL ELECTRICAL CODE S2898A 13 Outdoor Antenna grounding If an outside antenna or cable system is connected to the unit be sure the antenna or cable system is grounded so as to provide some protec tion against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an an
57. elect the below items then hit ENTER TV MODE QUICK You can change certain aspects of the DVD display screens and on screen messages on the TV screen e 4 3 LETTER BOX default i pew TV MODE 4 3 LETTER BOX and bottom of the screen STILLMODE 4 3 PAN amp SCAN To show To show black bars on top a full height picture with both sides trimmed STILL MODE This function allows you to adjust picture resolution and quality in the still mode e AUTO default SPL Automatically select the best __ sierrengox resolution setting FRAME ee or FIELD based on the data characteristics of the pictures e FIELD Select FIELD when the pictures are still unstable even if AUTO is selected FIELD stabilizes the pictures although the picture quality may become coarse due to the limited amount of data e FRAME Select FRAME to display relatively motionless pictures in higher resolution FRAME improves the picture quality although it may unstabilizethe pictures due to simultaneous output of two field data 4 Hit SETUP to exit the menu AUDIO SETTINGS Choose the appropriate Audio settings for your equip ment as it only affects during the playback of DVD discs Follow steps 7 to 2 in the CUSTOM MENU sec tion on page 42 3 Press V to select the below items then hit ENTER SETUP AUDIO DR
58. els to be TV channels if reception condition is poor In this case check the antenna connection and try AUTO CH PROGRAMMING again when reception condi tions are better Channel memory programming is NOT neces sary when connected to a cable box or satellite box Just select the channel for cable box or satellite input ex CH3 on the unit then select your desired channel on the cable box or satel lite box NO TV SIGNALS 17 ADDING DELETING CHANNELS The channels you no longer receive or seldom watch can be deleted from the memory Of course you can add the deleted channel into the memory again 1 Select CHANNEL SET UP Hit SETUP 2 Press A V to point to CHAN RADAR NEL SET UP then hit ENTER Zw TIME SEARCH INDEX SEARCH TVNCR SETUP TIMER PROGRAMMING SETTII LOCK v CHANNEL SET UP 2 Select ADD DELETE CH cuwwEsETUP Press A w to point to gt ADD DELETE CH CATV ADD DELETE CH then hit AUTO PROGRAMMING ENTER Men 5 3 Enter the desired channel number Press CH A W or the Number buttons until your desired channel number appears You can also 08 press A W to enter it e You must precede single digit channel numbers with a zero Example 02 09 When selecting cable channels which are higher than 99 hit 100 first then press the last two digits Example to select channel 125 first hit 100 then hit 2 and 5
59. entaci n Conecte a un toma de CA est ndar 120 V 60 Hz NOTA Antes de conectar el cable de alimentaci n de una toma de CA est ndar ret relo del gancho para evitar dafiarlo Toma AUDIO OUT COAXIAL Conecte solamente a la entrada digital de un amplificador externo o decodificador para audio de DVD solamente Abra la cubierta del compartimiento de las pilas empujando la cubierta del mando a distancia en el sentido de la flecha A Inserte 2 pilas AA en el b gt compartimiento de las pilas enel sentido indicado por las marcas de polaridad Vuelva a poner la cubierta PREPARACI N PARA LA UTILIZACION CONEXIONES DE ANTENA CABLE Consulte la figura 4 de la p gina 12 ANTENA COMBINADA DE VHF UHF La antena combinada de VHF UHF de 75 ohmios puede conectarse a la toma ANT ANTENAS SEPARADAS DE VHF UHF En algunas zonas ser necesario utilizar una antena exterior TELEVISI N POR CABLE SIN CAJA DE CONVERTIDOR DECODIFICADOR Utilice esta conexi n si su sistema de televisi n por cable se conecta directamente a la unidad sin una caja de convertidor TELEVISI N POR CABLE CON CAJA DE CONVERTIDOR DECODIFICADOR O CAJA DE SAT LITE Si su compa a de televisi n por cable le suministra una caja de convertidor o si utiliza un sistema de sat lite podr utilizar la conexi n b sica que se muestra en la ilustraci n L
60. er e Still fast slow step playback Various playback modes are available including still pictures fast forward reverse slow motion and step frames Random playback for Audio CD This unit can shuffle the order of tracks to play them in random order e Program playback for Audio CD You can program the order of tracks to play them in any desired order e DVD menus in a desired language You can display DVD menus in a desired language if available on a DVD e Screen saver Auto power off functions The screen saver program starts when there is no input from the unit for 5 minutes in the stop mode After the screen saver program is activated for 15 minutes the power automatically turns off e Subtitles in a desired language You can select a desired language for the display subtitles if that language is available on a disc e Selecting a camera angle You can select the desired camera angle if a disc contains sequences recorded from different angles Choices for audio language and sound mode You can select the desired audio language and sound mode if different languages and modes are available on a disc e Parental lock You can set the control level to limit playback of discs which may not be suitable for children Automatic detection of discs This unit automatically detects if the loaded disc is DVD or Audio CD e On screen display Information about the current operation can be dis played on a TV screen allowin
61. er the correct numbers using A V e After setting a program 1 Hit POWER 2 Repeat steps 7 to 2 on page 30 3 Hit gt or hit lt 4 to go back one step until the part you want to correct begins flashing then make the changes using A W 4 Hit POWER to set automatic timer recording TO CANCEL AN AUTOMATIC TIMER RECORDING 1 Hit POWER 2 If recording is in progress hit Bl 4 STOP EJECT on the unit 3 Repeat steps 7 to 2 on page 30 and select a pro gram you want to cancel 4 Hit C RESET 5 Hit SETUP to return to TV mode EN TO CONFIRM THE TIMER SETTING 1 Hit POWER so that the Recording indicator light goes off 2 Hit SETUP 3 Confirm TIMER PROGRAMMING is selected 4 Hit ENTER The details of programs appear on the TV screen 5 Hit SETUP to return to TV mode AUTO RETURN TV VCR With this feature after timer recording is finished the beginning of the recorded program s can be searched for automatically 1 Select USER S SET UP Hit SETUP Press A V to point to USER S SET UP then hit ENTER TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER S SET UP V CHIP SET UP LANGUAGE ENGLISH CAPTION OFF ZERO RETURN Y TIME SEARCH INDEX SEARCH 2 Set AUTO RETURN to ON Press A V to point to AUTO RETURN then hit ENTER until ON appears USER S SET UP RENTAL OFF REPEAT PLAY O F gt
62. es of the unit with a soft cloth immersed in lukewarm water and wrung dry e Never use a solvent or alcohol Do not spray insec ticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed sur faces AUTO HEAD CLEANING e Automatically cleans video heads as you insert or remove a cassette so you can see a clearer picture e Playback picture may become blurred or interrupt ed while the TV program reception is clear Dirt accumulated on the video heads after long periods of use or the usage of rental or worn tapes can cause this problem If a streaky or snowy picture appears during play back the video heads in your unit may need to be cleaned 1 Please visit your local Audio Video store and pur chase a good quality VHS Video Head Cleaner 2 If a Video Head Cleaner does not solve the prob lem please call our help line mentioned on the front page to locate an Authorized Service Center NOTES e Remember to read the instructions included with the video head cleaner before use Clean video heads only when problems occur SERVICING e Should your unit become inoperative do not try to correct the problem by yourself There are no user serviceable parts inside Turn off unplug the power cord and please call our help line mentioned on the front page to locate an Authorized Service Center IF THE LASER OPTICAL PICKUP UNIT IS DIRTY e If the unit still does not perform properly when it is
63. g PLAY gt ALL REPEAT Repeat playback from the beginning to the end of the tape BLANK REPEAT Repeat playback from the begin ning to a blank part which is blank for more than 10 seconds 1 Select USER S SET UP Hit SETUP Press A V to point to USER S SET UP then hit ENTER TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER S SET UP V CHIP SET UP LANGUAGE ENGLISH CAPTION OFF ZERO RN v INDEX SEARCH 2 Select ALL or BLANK Press A V to point to REPEAT PLAY Hit ENTER repeatedly until your desired selection ALL or BLANK appears USER S SET UP REPEAT PLAY AUTO RETURN OFF v 3 Exit the Repeat Play setting Hit SETUP to return to the TV mode 4 Start playback Hit PLAY gt to start the Repeat Play REPEAT PLAY appears Once you select the repeat play mode it stays in effect even after you turn off the unit e f the rental mode is set ON the RENTAL PLAY display has priority TO CANCEL THE REPEAT PLAY MODE Repeat steps 1 to 2 and select OFF using ENTER Hit SETUP to return to TV mode Even if there is a power failure of any kind the unit will retain its memory for this feature SEARCH Make sure e The unit must be turned on e Insert a tape ZERO RETURN TV VCR This function allows you to search easily a beginning point that yo
64. g you to confirm the currently active functions such as program play back on the TV screen using the remote control e Search Chapter search Title search Track search Time search e Repeat Chapter Title Track All A B e Zoom Magnified screen can be displayed e Marker The part designated by user can be called back e Resume Play User can resume to playback from the part at which the play was stopped e Virtual Surround e Bit rate indication e DRC Dynamic range control You can control the range of sound volume EN OPERATING CONTROLS AND FUNCTIONS FRONT PANEL Fig 1 100000000000000 00000000000000 0090000665 000000000000000 3000000000000000 DVD buttons buttons y MO a me SKIP PLAY SKIP STOP OPENCLOSE CHANNEL REMOTE CONTROL Fig 2 POWER PICTURE SLEEP SELECT The amp ET C6 9 100 10 25 43 26 42 DVD 3 3 DVD TVNCR 14 15 TVNCR DISPLAY 27 FO ED Me ay a 225 5 C3 1H 38 AUDIO SUBTT MODE 31 36 32 ry 35 33 H 34 1 POWER Button TV VCR P 15 DVD P35 Hit to turn the power on and off 2 VOLUME VOL A V Buttons Press to control the volu
65. ge Setting for Audio and Subtitle are not valid for some discs due to default setting of the disc In this case set them by hitting AUDIO and SUBTITLE Refer to page 39 e If you select a language that is not supported by the disc subtitle will automatically be set OFF and the first item of the audio languages will be automatical ly set Language Code Language Code A B L N Abkhazian 4748 Laothian 5861 Afar 4747 Latin 5847 Afrikaans 4752 Latvian Lettish 5868 Albanian 6563 Lingala 5860 Amharic 4759 Lithuanian 5866 Arabic 4764 Macedonian 5957 Armenian 5471 Malagasy 5953 Assamese 4765 Malay 5965 Aymara 4771 Malayalam 5958 Azerbaijani 4772 Maltese 5966 Bashkir 4847 Maori 5955 Basque 5167 Marathi 5964 Bengali Bangla 4860 Moldavian 5961 Bhutani 5072 Mongolian 5960 Bihari 4854 Nauru 6047 Bislama 4855 Nepali 6051 Breton 4864 Norwegian NOR 6061 Bulgarian 4853 O R Burmese 5971 Occitan 6149 Byelorussian 4851 Oriya 6164 C E Oromo Afan 6159 Cambodian 5759 Panjabi 6247 Catalan 4947 Pashto Pushto 6265 Chinese CHI 7254 Persian 5247 Corsican 4961 Polish 6258 Croatian 5464 Portuguese POR 6266 Czech 4965 Quechua 6367 Danish DAN 5047 Rhaeto Romance 6459 Dutch DUT 6058 Romanian RUM 6461 English ENG 5160 Russian RUS 6467 Esperanto 5161 S Estonian 5166 Samoan 6559 F H Sangho 6553 Faroese 5261 Sanskrit 6547 Fiji 5256 Scots Gaelic 5350 Finnish FIN 5255 Se
66. he same channel every week Example every Monday Hit w until EVRY and your desired day of the week appear together then hit gt TIMER PROGRAMMING CH DATE BEGIN END 30 EN TIMER PROGRAMMING CH DATE 5 Set beginning hour Press A W until the desired hour appears Example 7 PM for 7 30PM Then hit P gt BEGIN END SAA NS TIMER PROGRAMMING CH DATE 6 Set beginning minute Press A W until the desired minute appears Example 30 for 7 30PM Then hit P gt BEGIN END a TIMER PROGRAMMING CH DATE BEGIN END 7 Set end hour Press A W until the desired hour appears Example 8 PM for 8 50PM Then hit P gt TIMER PROGRAMMING 8 Set end minute CH DATE BEGIN END Press A W until the desired ee en minute appears Example 50 for 8 50PM Then hit P gt se MEM oa 9 Set the tape speed Press A W until the desired tape speed appears Example SP TIMER PROGRAMMING CH DATE BEGIN END 10 Finish setting the program Press ENTER or RETURN to complete setting To set another program repeat steps 2 to 10 e Hit SETUP to exit the menu 11 Set the timer Hit POWER to set automatic timer recording The recording indicator lights up You must turn off the unit to activate automatic timer recording If power is not turned off and
67. icture at any time for close viewing of a particular scene Digital Auto Tracking DTR Automatically adjusts the tracking for each tape you play Rental play mode Improves playback picture quality from worn tapes such as rental tapes Auto repeat Allows you to repeat the playing of a tape indefinitely without hitting PLAY gt Time search Lets you set the unit to advance the tape by entering the desired playback time you want to skip OTR One Touch Recording Instant timed recording from 30 to 480 minutes is possible by hitting REC OTR 1 Year 8 events including Daily and Weekly Timer Recording The built in timer allows you to record up to 8 programs at different times on dif ferent channels up to 1 year in advance The Daily timer allows recordings to be made of daily broad casts and the Weekly timer allows recording to be made once a week up to the end of the tape e Auto return After timer recording is finished the unit can return to the beginning of the recording Sleep timer Allows you to have the unit automati cally turn off at a desired time e Timer Program Extension Allows you to shift the time schedule for automatic timer recording e V CHIP Enables parents to prevent their children from watching inappropriate material on TV EN DVD Mode Dolby Digital sound This unit can handle Dolby Digital surround sound having 5 1 channels when connected to a Dolby Digital decod
68. ifferent types of batteries together polarity markings e g Alkaline and Carbon Zinc or old batteries 3 Replace the cover with fresh ones e If the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage e Do not try to recharge batteries not intended to be recharged they can overheat and rupture 11 EN PREPARATION FOR USE ANTENNA CABLE CONNECTION Cables used here are commercially available ANTENNA CONNECTION CATV SATELLITE CONNECTION 75 ohm uum CATV Box or pean table Satellite Box VHF UHF H OR VHF UHF Combiner oL E gt CO 0 a 7 From Cable System or D ssim Satellite Antenna Flat twin 75 ohm ac e mon pa Coaxial Cable de Sb i From Cable System UE Adaptor Some cable TV systems use scrambled signals and require a special converter to receive these channels Fig 4 Consult your local cable company Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical
69. ing or playback time in hours minutes and sec onds The indication will appear when the tape is rewound further than the tape counter position 0 00 00 181 channel capability PLL frequency synthesiz er tuner with direct station call A converter may be necessary to view scrambled cable channels Auto Clock Setting Allows you to set the clock function from a PBS broadcast station Closed Caption Decoder You may view specially labeled cc TV programs movies news prere corded tapes etc with either a dialogue caption or text display added to the program Auto power on and off system Automatically turns on the unit when you insert the cassette turns off after auto rewind and ejects when the begin ning of the tape is reached Auto rewind when the end of a tape is reached This function doesn t occur when using timer recording Smooth mode change TV VCR mode and DVD mode automatically changes without control 2 Step picture search operation You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode For SP mode only high speed is avail able Three different playback tape speeds SP LP SLP e Two different recording tape speeds SP SLP Auto Head Cleaner Automatically cleans video heads as you insert or remove a cassette e Zero Return The tape returns to counter of 0 00 00 by rewinding or fast forwarding e Still Freeze the p
70. ion should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn PORTABLE CART WARNING S3126A AMEUBLES Cet appareil ne doit tre plac que sur un meuble avec ou sans roulettes recommand par le fabricant Si vous l installez sur un meuble roulettes d placez les deux ensembles avec pr caution Un arr t brusque l utilisation d une force excessive et des sur faces irr guli res risquent de d sta biliser l ensemble et de le renverser SYMBOLE D AVERTISSEMENT POUR LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES Ventilation Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating and these openings must not be blocked or covered The open ings should never be blocked by placing the unit on a bed sofa rug or other similar surface This unit should never be placed near or over a radiator or heat register This unit should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 10 Power Sources This unit should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home con sult your appliance dealer or local power company For the units intend
71. isplays the counter or the current channel num ber and current time on the TV screen DVD 41 Displays the current status on the TV screen 28 SETUP Button TV VCR P 16 DVD P42 44 Hit to enter or exit the setup menu of TV or DVD 29 TITLE Button DVD P35 Displays the title menu 11 0000000000000 000000000 ea Sv AUDIO OUT COAXIAL o 30 CLEAR Button DVD P37 Hit to clear or cancel a setting currently entered 31 MODE Button DVD P38 Hit to call up the program screen or the random screen in the stop mode Hit to call up the Black Level Setting screen or the Virtual Surround screen during playback 32 SEARCH MODE Button DVD P37 Hit to locate a desired point 33 AUDIO Button DVD P 39 Hit to select a desired audio language or sound mode 34 SUBTITLE Button DVD P39 Hit to select a desired subtitle language 35 REPEAT Button DVD P38 Repeats playback of the current disc title chapter or track 36 ANGLE Button DVD P40 Hit to change the camera angle to see the sequence being played back from a different angle if avail able 37 A B Button DVD P38 Repeats playback of a selected section 38 RETURN Button TV VCR P31 DVD P37 Returns to the previous screen in the setup menu 39 ENTER Button TV VCR P 16 DVD P35 Hit to accept a setting 40 4 Y lt gt Buttons TV VCR Mode P 15 Press to select a setting mode from the menu on the TV screen Press to selec
72. l cable el ctrico de la unidad en un tomacorriente de CA del hogar NOTA e Si aparecen n meros en la esquina de la pantalla presione POWER sin desenchufar el cable el ctrico 2 Encienda la unidad Presione POWER para encender la unidad 3 Seleccione el numero de canal Presione CH A V olos botones num ricos para seleccionar su n mero de canal deseado Nota para el uso de los botones num ricos Debe colocar un cero antes de los n meros de canal de una sola cifra por ejemplo 02 03 04 etc e Cuando seleccione canales de cable de m s de 99 presione primero 100 y despu s las dos ltimas cifras Ejemplo para seleccionar el canal 125 primero presione 100 y despu s presione 2 y 5 4 Ajuste el sonido Presione VOL A V para ajustar el volumen Presione MUTE para silenciar instant neamente el sonido Presione nuevamente para recuperar el nivel de sonido anterior NOTA e Si presiona CH A V en el modo DVD puede cambiar los canales de TV Incluso si desconecta la unidad en el modo DVD cuando vuelva a conectar volver al modo TV VCR PARA VER CANALES DE CABLE O SATELITE e Si la unidad est conectada a una caja de cable o caja de sat lite presione CH A W para seleccionar CH3 o CH4 de acuerdo con el ajuste de canal de salida del dispositivo y seleccione el canal deseado en el dispositivo PARA VER UNA ENTRADA EXTERNA e Cuando se conecta un equipo externo e
73. lines black and white streaks may appear on the playback picture when playing pre recorded tapes or tapes recorded on other VCR If this occurs press CH A W until the streaks disap pear You can reduce the noise lines by pressing CH A V in the slow mode too Tracking adjust ment in the slow mode will not be set automatically To return to the Digital Auto Tracking function stop the tape once and start playback 2 Tobegin playback To begin playback Hit PLAY gt To stop playback Hit STOP W 3 93 SLOW MOTION TV VCR Hit PAUSE I then hit gt gt to start the playback in slow motion The unit mutes the sound during slow motion Hit PLAY gt to return to normal playback NOTE e If it is left in the slow mode for more than 5 min utes the unit will automatically go into the stop mode STILL PICTURE TV VCR You can view a still picture on the TV screen during playback the still mode Hit PAUSE during playback Only tapes recorded in the SLP mode will show the least amount of lines Hit PLAY gt to return to playback NOTES You can advance the picture one frame at a time by hitting PAUSE I during the still mode e f it is left in the pause mode for more than 5 min utes the unit will automatically switch to the stop mode VERTICAL HOLD CONTROL TV VCR In the pause still mode only when the picture begins to
74. lure for more than 3 seconds you may have to reset the clock TO CHANGE CLOCK SETTING If you want to change the clock 1 Follow steps 7 to 2 2 Select the item you want to change using gt 3 Enter correct numbers using A V 4 Hit SETUP to start the clock 18 EN AUTOMATIC CLOCK SETTING Make sure e The unit must be turned on e Confirm the unit is receiving a RF Radio Frequency signal from either an antenna or cable system connection using the ANT jack on the rear of the unit NOTES e If a cable converter box is being used make sure it is powered on You must use the remote control to perform the clock setting procedure e If the unit is connected directly to a cable converter box or satellite box the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box usually channel 3 or 4 to be able to set up or correct the clock automatically 1 Select SETTING CLOCK Hit SETUP Press A W to select SETTING CLOCK then hit ENTER TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER S SET UP V CHIP SET UP LANGUAGE ENGLISH TIME SEARCH INDEX SEARCH SETTING CLOCK AUTO CLOCK DON 4 2 Set AUTO CLOCK to ON Hit ENTER to select ON AUTO CLOCK CH SEARCH AUTOCLOCKCH 02 MANUAL CLOCK SET OFF 3 Begin AUTO CLOCK CH SE
75. mber combinations Please check with your local cable company The following is a chart of common cable channel designations CATV channel TV Display CATV channel TV Display TV Display CATV channel W 80 TV Display 239 5 EN DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Playable Mark logo Region code onde Disc size Disc types DVD Example mc Digital video 1 PS Tile Title 2 RW _ P EG2 arbo Pines iid Jem S dal 4 2 DVD RW DVD R 1 3 4 5 7 8 9 DVD ReWritable DVD R Audio CD 3 5 DIGITAL AUDIO compact compact Audio CD J Example Digital audio oria 3 ETE Teck 1 platino 2 gt Zack 3 4 5 gt Tao 6 COMPACT 3 4 5 8 9 Se BYP is a trademark of DVD Format Logo Licensing Corporation If you cannot play back a disc which bears one of the marks above check the following notes This unit conforms to the NTSC color system Discs recorded in other color systems such as PAL cannot be played back 2 Certain DVD Video discs do not operate as described in this manual due to the intentions of the disc s producers 3 Scratched or stained discs may not be played back 4 Some discs cannot be played back because of incompatible recording conditions characteristics of the recorder or special properties of discs 5 You can play back
76. me level for the DVD and TV 3 SKIP 44 gt gt Buttons for DVD DVD P37 Press once to skip chapters or tracks to a desired point SEARCH lt lt gt Buttons for DVD DVD P36 Press and hold to change forward or reverse play back speed 4 9 PLAY Button TV VCR P23 DVD P35 Starts playback of the disc or tape contents 7 T 38 1 Oty 707 ID PRT ty 119839 I I L 1 1l I I DL T 1 I DL 1 AS 1 2 m 5 6 7 8 9 10 1112 13 14 4 15 2 5 STOP Button TV VCR P23 DVD P35 Front panel Stops operation of the disc Remote control Stops operation of the disc or tape contents 6 4 OPEN CLOSE Button DVD P35 Hit to insert a disc into or remove it from the tray 7 Disc loading tray 8 DVD Indicator Lights up during DVD mode 9 SELECT Button TV VCR P 15 DVD P35 Hit to change to TV VCR mode external input mode or DVD mode You can see the mode TV VCR or DVD on the front panel indicator 10 TV VCR Indicator Lights up during TV VCR mode 11 CHANNEL CH A V Buttons Press to select memorized channels 12 Recording Indicator Flashes during recording Lights up in the stand by mode for Timer Recording 13 REC OTR Button Front Panel TV VCR P29 Hit to start manual recording Hit repeatedly to start One Touch Recording RECORD Button Remote Control TV VCR P28 Hit to start manual recording 14 lt lt REW Button for TV VCR TV VCR P25 Hit to rewind
77. mode is set to something other than STEREO THE ON SCREEN INFORMATION DVD V CD You can check the information about the current disc by hitting DISPLAY For DVD Vs For Audio CDs 1 Hit DISPLAY during playback to show cur 1 Hit DISPLAY during playback to show the rent Chapter current Track e elapsed and remaining ast e The elapsed and remaining playing time of the cur playing time of the current rent track will be displayed gt chapter will be displayed 2 Hit DISPLAY again 19 show current Title 2 Hit DISPLAY again to show current Total e elapsed and remaining isis etie Track S displaye d ied e The elapsed and remaining playing time of the total track will be displayed AA 3 Hit DISPLAY again e The bit rate and the current E repeat setting will be a uut 3 Hit DISPLAY again to exit played f you are playing a dual lay d ered disc the layer number will also be displayed NOTE LO Layer 0 is playing Ll Layer 1 is playing e When you are playing a disc in M M PROGRAM or RANDOM mode EJ PROGRAM 4 Hit DISPLAY again to exit or RANDOM will be dis eA EN CHANGING THE DVD SET UP ITEMS CUSTOM MENU DVD V You can change the DVD player s settings 1 Hit SETUP twice in the stop mode so that the DVD SETUP menu appears e Hit W to select CUSTOM then hit ENTER
78. modo TV VCR 11 Botones CHANNEL CH a v Utilice para seleccionar canales memorizados 12 Indicador de grabaci n Parpadea durante la grabaci n Se ilumina durante el modo de espera de grabaci n controlada por temporizador on 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 50 Bot n REC OTR Panel frontal Presione para empezar la grabaci n manual Presione repetidamente para empezar la grabaci n instant nea OTR Bot n RECORD Mando a distancia Presione para empezar la grabaci n manual Bot n lt lt REW para TV VCR Presione para rebobinar la cinta o para ver la imagen r pidamente en direcci n de retroceso durante el modo de reproducci n Busqueda en direcci n de retroceso Bot n F FWD gt gt para TV VCR Presione para adelantar r pidamente la cinta o para ver la imagen r pidamente en direcci n de avance durante el modo de reproducci n B squeda en direcci n de avance Bot n 4 STOP EJECT Presione para detener la cinta Presione en el modo de parada para retirar la cinta de la unidad Ventanilla del sensor de mando a distancia Toma HEADPHONE Para conectar auriculares no suministrados y escuchar en privado Toma de entrada VIDEO Conecte aqu la toma de salida de video de una videoc mara o de una videograbadora Tomas de entrada AUDIO L R Conecte aqu las tomas de salida de audio de una videoc mara
79. n can be played back e Levels 7 to 2 Only DVD software intended for general use and children can be played back e Level 1 Only DVD software intended for children can be played back with those intended for adult and general use prohibited 44 IF YOU FORGET THE PASSWORD 1 Hitthe Number buttons 4 7 3 7 at step 3 Then enter your new password e Password will be cleared and parental level will be set to ALL 2 Proceed with steps 4 to 6 again E OTHER SETTINGS Follow steps 7 to 2 in the CUSTOM MENU sec tion on page 42 3 Press A V to select the below items then hit ENTER Wm TERES ANGLE ICON ON AUTO POWER OFF ON fupe e D ANGLE ICON e Hit ENTER repeatedly to turn Angle icon ON or OFF e The default setting is ON AUTO POWER OFF e Hit ENTER repeatedly to turn Auto Power off ON or OFF e The default setting is ON and the screen saver pro gram starts when there is no input from the unit for 5 minutes in the stop mode After the screen saver pro gram is activated for 15 minutes the power is auto matically turned off 5 Hit SETUP to exit the menu INITIALIZE DVD V This allows you to return all selections of SETUP except for PARENTAL and menu language to their default settings 1 Hit SETUP twice in the stop mode so that
80. n las tomas de entrada AUDIO VIDEO frontales presione SELECT o CH A V repetidamente hasta que aparezca AUX en la pantalla IDIOMA DEL MEN TV VCR 1 Seleccione LANGUAGE Presione SETUP Presione A V para apuntar al LANGUAGE 2 Seleccione ENGLISH ESPA OL o FRANCAIS Presione ENTER repetidamente para seleccionar ENGLISH ingl s ESPANOL o FRANCAIS franc s 3 Salga del modo de idioma Presione SETUP para salir del men NOTAS e Esta funci n afecta s lo el idioma en el men de la pantalla y no la fuente de audio e Si por alguna raz n el men est en franc s presione SETUP presione A V para apuntar al LANGAGE FRANCAIS y presione ENTER repetidamente para seleccionar el idioma deseado y presione SETUP AJUSTE DEL RELOJ TV VCR AJUSTE MANUAL DEL RELOJ Aseg rese La unidad debe estar encendida En el siguiente ejemplo el reloj debe estar en FECHA 6 de mayo 2005 HORA DE AJUSTE 5 40PM 1 Seleccione AJUSTE RELOJ Presione SETUP Presione A V para selecciona AJUSTE RELOJ y presione ENTER 2 Seleccione AJUSTE MANUAL RELOJ Presione A V para seleccionar AJUSTE MANUAL RELOJ y presione ENTER 3 Seleccione el mes Presione A V hasta que aparezca el mes deseado Ejemplo Mayo 05 Presione gt O presione lt 4 para volver un paso 4 Sele
81. nd OTR e The index mark will not be recorded if PAUSE II is hit and released during recording e The time gap between making the index marks on the tape should be greater than 1 minute for SP recording 2 minutes for LP recording and 3 min utes for SLP recording n some cases the index mark at the beginning of video tape cannot be detected Example You are watching program number 4 and want to fast forward to program number 7 You must skip three programs CURRENT PLAYBACK PROGRAM Beginning of End of the tape the tape ime ee Treo Raa Pos Poo 1 1 2 3 4 3 2 INDEX MARK TVNCR SETUP TIMER PROGRAMMING SETTING CLOCK 1 Select INDEX SEARCH Hit SETUP Press A W to point to INDEX SEARCH then hit ENTER CHANNEL SET UP USER S SET UP V CHIP SET UP LANGUAGE ENGLISH CAPTION OFF ZERO RETURN TIME SEARCH INDEX SEARCH 2 Enter your desired number Press A W until the number of programs that you want to skip appears Example 03 for 3 programs INDEX SEARCH 03 e The Index Search mode will be canceled if the pro cedures are not activated in 30 seconds 3 Begin Index Search Press lt 4 gt The unit begins rewinding or fast for warding to the beginning of desired program NOTE Every time an index signal is skipped the number in the program indicator decreases by one 4 After Index Search When the preset program is reached
82. o de una videograbadora Compartimiento del cassette Bot n PICTURE Presione para ajustar la imagen Botones num ricos Modo TV VCR Presione dos cifras para acceder directamente al canal deseado No olvide presionar 0 antes de elegir un canal de una sola cifra Boton 100 Presione para seleccionar canales de television por cable cuyo n mero sea superior a 99 Modo DVD Presione para introducir el n mero deseado Bot n 10 Presione para introducir n meros superiors a 9 Bot n PAUSE II Hace una pausa en la reproducci n del disco o cinta Bot n SPEED Presione para seleccionar la velocidad de grabaci n deseada SP SLP Bot n C RESET Presione para poner el contador en 0 00 00 Presione tambi n para cancelar un ajuste de programa de temporizador Bot n DISPLAY Modo TV VCR Indica el contador o el n mero del canal y la fecha actual en la pantalla del televisor Modo DVD Indica el estado actual en la pantalla del televisor Bot n SETUP Presione para entrar o salir del men de configraci n de televisor o DVD Bot n TITLE Para visualizar el men de t tulos Bot n CLEAR Presione para cancelar o borrar un ajuste entrado actualmente Bot n MODE Presione para llamar la pantalla de la reproducci n programada o la de reproducci n aleatoria en el modo de parada Presione para llamar la pantalla de ajuste del nivel del negro o la pantalla de sonido ambiental durante la reproducci n ES 32 33 34 35 36 37
83. o exit the menu CHANGE ACCESS CODE Follow steps 7 to 3 in the V CHIP SET UP sec tion on page 20 4 Enter New code Press the Number buttons to enter your desired access code in the NEW CODE space then enter the same code in the CONFIRM CODE space When completed the menu will return to V CHIP SET UP Make sure you enter exactly the same new code in the CONFIRM CODE space as one in the NEW CODE space If they are different the NEW CODE space is cleared for redoing NEW CODE XXXX CONFIRM CODE 5 Exit the V Chip setting mode Hit SETUP to exit the menu NOTE Your personal access code will be erased and will return to the default 0000 when a power failure occurs or when you turn off the power using a wall switch If you have forgotten the code unplug the power cord for 10 seconds to restore the access code to 0000 MENU LANGUAGE TV VCR 1 Select LANGUAGE Hit SETUP erue Press A W to point to LAN VOU SET UF lil GUAGE sets TIM RCI IE SEARCH INDEX SEARCH 2 Select ENGLISH ESPA OL or FRANCAIS Hit ENTER repeatedly to select ENGLISH ESPANOL Spanish or FRANCAIS French 3 Exit the Language mode Hit SETUP to exit the menu NOTES e This function effects only the language on the screen menu and not the audio source e If for some reason
84. on this unit Hit SELECT to select DVD mode then try other DVD feature Disc cannot be played nsert the disc Clean the disc Place the disc correctly with the label side up Cancel the parental lock or change the control level No sound Connect the audio cables firmly Turn the power of the audio component on Correct the audio output settings Correct the input settings on the audio component Distorted picture There are some cases where pictures may be slightly distorted which are not a sign of a malfunction Although pictures may stop for a moment this is not a malfunction does not match the set up DVD This is not a malfunction angles This is not a malfunction Audio or subtitle language cannot The DVD does not contain audio source or subtitles in the selected Prohibited icon appears on the That operation is prohibited by the unit or the disc CD sound dropout e Scratched disc Replace the disc with an unscratched one No CD reproduction DVD picture dropout DVD picture freeze DVD picture in mosaic No DVD reproduction NOTES e Some functions are not available in specific modes but this is not a malfunction Read the description in this Owner s Manual for details on correct operations e Playback from a desired track and random playback are not available during program playback Ap EN MAINTENANCE CABINET CLEANING e Wipe the front panel and other exterior surfac
85. operated while referring to the relevant sections and to TROUBLESHOOTING GUIDE in this Owner s Manual the laser optical pickup unit may be dirty Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit DISC HANDLING e Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs EN e Always store the disc in its protective case when it is not used e To clean off use a soft cloth Do not use a hard cloth since this will mar the disc e Wipe the disc in a straight line from center to edge e Never wipe with a circular motion Do not use detergent or abrasive cleaning agents 48 EN SPECIFICATIONS GENERAL SPECIFICATIONS TV VCR CRT Television system Closed caption system Video Heads Tape width Tape speed SP LP SLP Tuner channel TV VHF Low TV VHF High TV UHF CATV VHF MID band SUPER band HYPER band DVD Product type Discs Output signal format 19 inch in line gun 90 deflection tube NTSC M 15 119 FCC Rotary four head 1 2 inch 33 40mm sec 16 67mm sec 11 12mm sec 82 46 7 13 14 69 5A A5 Al A I J W W 1 W 84 DVD Player DVD video Audio CD NTSC color ELECTRICAL SPECIFICATIONS Sound output 2 speakers 1 W 8 ohm OTHER SPECIFICATIONS Terminals Antenna input Video input A
86. rative when playback is stopped TITLE CHAPTER SEARCH DVD V 1 Hit SEARCH MODE once for the Chapter search twice for the Title search during playback i _ 2 Enter the desired chapter title number using the Number buttons e Playback will start at the selected chapter or title e Hit CLEAR to erase the incorrect input For single digits hit 0 first if the total number of chapter or title of the disc is 10 or more 37 TIME SEARCH DVD V CD 1 During playback hit SEARCH MODE three times CD twice to display the Time Search on the TV screen 2 Within 30 seconds enter a desired disc time using the Number buttons e Playback will start at the specified time e Hit CLEAR to erase the incorrect input e When there is no need to enter a number 0 appears automatically For example 0 0_ _ appears in the Time Search display if the total time of the track or title is less than 10 minutes MARKER SETUP SCREEN DVD V CD Use markers to memorize your favorite places on a disc 1 Hit SEARCH MODE four times CD three times during playback e The display screen and Markers will appear on the TV screen 2 Press 4 gt to select 1 2 3 4 5 6 7 8 9 or 10 and ensure that L appears in the display 3 When you reach the desired point hit ENTER e The Title or Track and elapsed playing time
87. rbian 6564 French FRE 5264 Serbo Croatian 6554 Frisian 5271 Sesotho 6566 Galician 5358 Setswana 6660 Georgian 5747 Shona 6560 German GER 5051 Sindhi 6550 Greek GRE 5158 Singhalese 6555 Greenlandic 5758 Siswat 6565 Guarani 5360 Slovak 6557 Gujarati 5367 Slovenian 6558 Hausa 5447 Somali 6561 Hebrew 5569 Spanish SPA 5165 Hindi 5455 Sundanese 6567 Hungarian HUN 5467 Swahili 6569 l K Swedish SWE 6568 Icelandic ICE 5565 T Indonesian 5560 Tagalog 6658 Interlingua 5547 Tajik 6653 Interlingue 5551 Tamil 6647 Inupiak 5557 Tatar 6666 Irish IRI 5347 Telugu 6651 Italian ITA 5566 Thai 6654 Japanese JPN 5647 Tibetan 4861 Javanese 5669 Tigrinya 6655 Kannada 5760 Tonga 6661 Kashmiri 5765 Tsonga 6665 Kazakh 5757 Turkish TUR 6664 Kinyarwanda 6469 Turkmen 6657 Kirghiz 5771 Twi 6669 Kirundi 6460 U Z Korean KOR 5761 Ukrainian 6757 Kurdish 5767 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yoruba 7161 Zulu 7267 If you choose a language that has a 3 letter language code the code will be displayed every time you change the AUDIO or SUBTITLE language setting above If you choose any other languages will be displayed instead 3 letter language code is written in bracket 42 EN DISPLAY SETTING Follow steps 1 to 2 in the CUSTOM MENU sec tion on page 42 3 Press A V to s
88. screen ex VCR or video camera etc 1D Audio cable OUT commercially available O To the Video output jack Front of the unit OUT Video cable IN PaT commercially available N Fig 5 NOTE e When you connect a monaural VCR another source to this unit connect the Audio output jack of the monaural VCR another source to the AUDIO L jack of this unit The audio will output in both L and R channel equally CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS for DVD Use an audio coaxial digital cable commercially available for the audio connections Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck 0000000000000 Li 0000000000000 Li 000000000 OUT ex MD deck DAT deck etc ae OUT 8 COAXIAL jack To Coax al digital Only DVD AUDIO OUT O EAS O 4n Audio input jack 2 IN Audio coaxial digital cable commercially available Fig 6 NOTES e The audio source on a disc in a 5 1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck e Be sure to turn off the power to all components in the system before connecting another component Refer to the Owner s Manuals for the components to be connected to the unit e Set DOLBY DIGITA
89. t supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO A FUNAI AUTHORIZED SERVICE FACILITY IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI ATTENTION FUNAI CORP RESERVES THE RIGHT TO MOD
90. t or adjust from a particular menu DVD Mode P 35 Press to select a menu item 41 DISC MENU Button DVD P35 Calls up the DVD menu 42 ZOOM Button DVD P36 Enlarges part of a DVD reproduced image 43 MUTE Button TV VCR P 15 Mutes the sound Hit it again to restore sound 44 SLEEP Button TV VCR P 16 Sets the Sleep Timer 10 EN 45 ANT ENNA Jack 47 AUDIO OUT COAXIAL Jack Connect to an antenna cable system or satellite Connect to the digital input of an external system amplifier or decoder for DVD Audio only 46 Power cord Connect to a standard AC outlet 120V 60Hz NOTE e Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet NOTE e We do not recommend the use of universal remote controls Not all of the functions may be controlled with a universal remote control If you decide to use a universal remote control with this unit please be aware that the code number given may not operate this unit In this case please call the manufacturer of the universal remote control INSTALLING THE BATTERIES 1 Open the battery compartment cover by pressing BATTERY PRECAUTIONS the cover on the remote unit in the direction of the Be sure to follow the correct polarity as indicated TUNE 2 in the battery compartment Reversed batteries 2 Insert 2 AA penlight batteries into the battery may cause damage to the device b direction mdicated Ute Do not mix d
91. ted to jack on the back of the set e If outside antenna is being used check for broken wire e Adjust CONTRAST amp BRIGHT control Sound OK Picture Poor e Try a new channel if OK then possible station trouble e s antenna connected to jack on the back of the set e If outside antenna is being used check for broken wire Check for local interference e Adjust CONTRAST amp BRIGHT control PROBLEM CORRECTIVE ACTION Picture OK Sound Poor e Try a new channel if OK then possible station trouble Check for local interference Timer recording is not possible e Make sure the timer recording is set correctly e Make sure the power is off e Make sure the unit s clock is set correctly Cannot go into the recording mode e Make sure the tape has an erase prevention tab If need cover the hole with plastic tape Playback picture is partially noisy e Adjust tracking control for a better picture using CHANNEL A V on the unit No picture but the audio is OK in Head cleaning may be necessary Refer to AUTO HEAD playback CLEANING on page 48 No operation by infrared Remote Make sure the AC cord is connected to an AC outlet Control Check batteries in remote control Video or color fades in and out You can not copy a copyrighted video tape You are experiencing when making a copy of a video tape copy guard protection Different color marks on screen e Magnetism from nearby appliances and geomagne
92. tenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Fig A 14 Lightning For added protection for this unit receiver dur ing a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the unit due to lightning and power line surges 15 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 16 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 17 Object and Liquid Entry Never push objects of any kind into this unit through openings as they may touch danger ous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the unit 18 Servicing Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20
93. th right and left channels are active stereo L ch only left channel is active R ch only right channel is active Z CAMERA ANGLE DVD V Some DVD discs contain scenes which have been shot simultaneously from various angles You can change the camera angle when the icon appears on the screen 1 Hit ANGLE during playback e The selected angle will be displayed on the display bar at the top of the screen 1 8 e If the ANGLE ICON setting is OFF in the OTHERS menu the 20 icon will not appear Refer to page 44 2 Hit ANGLE repeatedly to select your desired angle BLACK LEVEL SETTING DVD V Adjust the Black Level Settings to make the black parts of the picture brighter 1 Hit MODE during playback OFF 2 Hit ENTER to switch ON OFF ON Makes the dark parts brighter OFF Shows the original picture as recorded Initial setting 3 Press MODE twice or RETURN to exit NOTE e The setting will be saved even if the unit is turned off 40 VIRTUAL SURROUND DVD V CD You can enjoy surround sound effect over two speak ers on this unit 1 Hit MODE twice CD once during play back a 2 Hit ENTER to set it 1 Natural effect 2 Emphasized effect or OFF 3 Hit RETURN to exit NOTE for CD play only e Virtual Surround will not be effective if the sound
94. the INITIALIZE menu appears 2 Press A V to select INITIALIZE then hit ENTER SETUP QUICK CUSTOM INITIALIZE 3 Press A V to select YES then hit ENTER twice All the settings except for mem PARENTAL and menu NO language will be cleared B e To cancel the initialization select NO 4 Hit SETUP to exit the menu SETUP INITIALIZE TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner s Manual check the unit con sulting the following checklist PROBLEM CORRECTIVE ACTION No power e Make sure the power plug is connected to an AC outlet Make sure the power is turned on No operation by infrared remote Check if the power plug is connected to an AC outlet control Check the batteries in the remote control e Aim the remote control directly at the remote sensor If necessary remove all the obstacles between the sensor and the remote control e You have to be within 23 feet of the unit Check if the correct mode is selected If not switch the mode by hitting SELECT whichever you need TV VCR Mode Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities Before arranging for service check these items It could save your time and money PROBLEM CORRECTIVE ACTION No picture or sound e Mak
95. the menu is in Spanish or French hit SETUP press A V to point to IDIOMA ESPANOL or LANGAGE FRANCAIS then hit ENTER repeatedly to select desired language then hit SETUP 21 EN VIDEO CASSETTE This unit will operate with any cassette that has the VHS mark For best results we recommend the use of high quality tapes Do not use poor quality or damaged tapes PRECAUTIONS e Avoid moisture Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or vice versa Before using a tape with these conditions to avoid damage of the tape and your unit wait until the tape has warmed to room temperature and the moisture has evaporated e Avoid extreme heat high humidity and magnetic fields Do not tamper with the cassette mechanism Do not touch the tape with your fingers TWO DIFFERENT TAPE SPEEDS Before recording select the tape speed from SP mode Standard Play or SLP mode Super Long Play The table below shows the maximum recording play back time using T60 T120 or T160 tapes in each mode Tape Speed Recording Playback Time Type of tape T60 T120 T160 SP mode hour 2 hours 2 2 3 hours SLP mode 3hours 6hours 8 hours NOTE You can play back a tape recorded in LP mode Long Play INSERTING A CASSETTE Insert the cassette in the direction as shown Push in gently but continuously on the center b
96. the tape or to view the picture rapid ly in reverse during playback mode Rewind Search 15 F FWD gt Button for TV VCR TV VCR P25 Hit to rapidly advance the tape or to view the pic ture rapidly in forward during playback mode Forward Search 16 4 STOP EJECT Button TV VCR P22 25 Hit to stop the tape motion Hit in the stop mode to remove tape from the unit 17 Remote sensor window 18 HEADPHONE Jack To connect headphone not supplied for personal listening EN REAR PANEL Fig 3 19 VIDEO input Jack Connect to the video output jack of a video camera or VCR 20 AUDIO L R input Jacks Connect to the audio output jacks of a video camera or VCR 21 Cassette compartment 22 PICTURE Button Hit to adjust the picture 23 Number Buttons TV VCR Mode P 17 Press two digits to directly access the desired channel Remember to hit 0 before a single digit channel 100 Button Hit to select cable channels which are higher than 99 DVD Mode P37 Hit to enter the desired number 10 Button Hit to enter the desired numbers which are higher than 9 24 PAUSE II Button TV VCR 23 DVD P36 Pauses the current disc or tape operation 25 SPEED Button TV VCR P28 Hit to choose the desired recording speed SP SLP 26 C RESET Button TV VCR P25 Hit to reset counter to 0 00 00 Hit to cancel a setting of timer program Refer to page 31 27 DISPLAY Button TV VCR Mode P33 D
97. the ventilation holes at the top or bottom of the unit Do not place the unit on a carpet because this will block the ventilation SYMBOLS USED IN THIS MANUAL holes e Install unit in a horizontal position The following symbols below appear in some head e Avoid locations subject to strong vibration ings and notes in this manual with the following Do not place the unit near strong magnetic fields EE e Avoid moving the unit to locations where tempera TV VCR ture differences are extreme Description refers to TV VCR operation in the TV VCR mode e Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the unit DVD V Description refers to playback of DVD video discs AVOID THE HAZARDS OF ee ELECTRICAL SHOCK AND FIRE Description refers to playback of Audio CDs Do not handle the power cord with wet hands in the DVD mode Do not pull on the power cord when disconnecting QUICK it from an AC wall outlet Grasp it by the plug Description refers to the items to be set by the e If by accident water is spilled on your unit unplug QUICK mode in the DVD mode the power cord immediately and take the unit to our Authorized Service Center for servicing Do not put your fingers or objects into the unit disc loading tray Do not place anything directly on top of the unit SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner s Manual Sd 97
98. tism might affect the color of the TV picture Move the unit away from the appliances the unit can repair itself automatically If you want to repair immedi ately unplug the power cord then plug it in again 30 minutes later or so This automatically resets the unit Error committed by the closed captioning production company Possible in a live broadcast Not in case of a prerecorded program Text is not shown in its entirety or A few seconds of delay is common for live broadcast a delay occurs from what is being Display capacity may not exceed 220 words per minute If a dialogue said exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialogue Captions scrambled with white Caused by interferences of building power lines thunderstorms etc boxes No captions in a program which The broadcast may use a time compression process to speed up the must contain closed caption program The decoder cannot read the compressed information and captions will be lost No captions in a prerecorded Possibility of a illegal copy or an erroneous copying process videotape which indicated closed accidentally performed by the fabricator captions included Black box in the TV screen You are in TEXT mode Select a CAPTION mode C1 2 or Caption OFF ed EN DVD Mode CORRECTIVE ACTION No picture nsert a correct video disc that plays
99. u want to review by rewinding or fast forwarding NOTE e Zero Return WILL NOT work on a blank tape or a blank portion of a tape 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review 2 Reset the counter to 0 00 00 Hit C RESET repeatedly 3 Begin recording or playback Press RECORD or PLAY Hit STOP Bi when recording or playback is com pleted 4 To activate ZERO RETURN Hit SETUP TVNCR SETUP Press A V to point to ZERO SETTING CLOCK RETURN then hit ENTER SET UP ENGLISH F CAPTION OFI N The unit will begin rewinding and the counter will appear on the TV screen The tape will automatically stop when the counter returns to 0 00 00 approx PICTURE SEARCH TV VCR This feature is very useful in finding or skipping over a particular scene on a tape In this mode the sound will be muted INDEX SEARCH 1 Start Picture Search During playback press gt gt or lt lt to view at a high speed in forward reverse 2 Change searching speed Press PP or 49 again to view at super high speed in the LP SLP modes only NOTE e Tapes recorded in the SP or LP mode will normally display a noise bar on the TV screen and the pic ture may revert to Black and White 3 Return to normal speed Hit PLAY gt TIME SEARCH TV VCR The Time Search function
100. udio L R input Headphone Coaxial digital audio output Remote control Operating temperature Power requirements Power consumption Maximum Picture tube Dimensions Weight e Designs and specifications are subject to change without notice e If there is a discrepancy between languages the default language will be English 49 75 ohm unbalanced F type RCA connector x 1 RCA connector x 2 1 8 stereo 3 5 mm One pin jack 500m Vpp 75 ohm Digital encoded infrared light system 5 C to 40 C 41 F 104 F AC 120V 60Hz 90W 19 H 19 11 16 500mm W 21 7 8 556mm D 18 3 4 477mm 45 2 lbs 20 5kg EN INDICE B INDICE en ID 50 E CONTROLES DE OPERACI N Y FUNCIONES 50 PARA INSERTAR LAS 51 B PREPARACI N PARA LA UTILIZACI N 51 CONEXIONES DE ANTENA CABLE 51 CONEXI N A TOMAS DE ENTRADA DELANTERAS 52 CONEXION A UN AMPLIFICADOR ESTEREO EQUIPADO CON TOMAS DE ENTRADA DIGITAL para DVD ui e ER pei e Coe Rees 52 CONEXI N A UN DECODIFICADOR DOLBY DIGITAL para tek s tre Sow wn cerea e ou erat 52 SECCI N DE TV VCR B FUNCIONES Y AJUSTES DE 53 PARA MIRAR UN PROGRAMA DE TV 53 IDIOMA DEL 53 AJUSTE DEL RELOJ e drena 53 1 54 GRABACI
101. will appear in the TV screen 4 return to the Marker later hit SEARCH MODE four times CD three times during playback and press gt to choose the desired marker then hit ENTER NOTES Operations which erase all Markers Opening the disc tray Turning off the power Hitting SELECT Selecting AC at step 2 and hitting ENTER e To clear a marker Press lt 4 B to select a cursor on to the marker number and hit CLEAR e You can mark up to 10 points 5 Press SEARCH MODE or RETURN to exit SPECIAL PLAYBACK FUNCTION REPEAT REPEAT is available only during playback REPEAT TITLE CHAPTER DVD V To activate the repeat function hit REPEAT during playback The repeat mode changes as described below every time you hit the button G CHAPTER 3 S TITLE OFF current chapter repeat current title repeat repeat off NOTES e Repeat Title Chapter is not available with some scenes e The REPEAT setting will be cleared when moving to other title or chapter REPEAT TRACK CD To activate the repeat function hit REPEAT during playback e The repeat mode changes as described below every time you hit the button TRACK ALL El current track repeat entire disc repeat repeat off NOTES e Repeat setting will be cl

Download Pdf Manuals

Related Search

Related Contents

Ne vous faîtes pas tant de souci  User Manual - Zeta Alarm Systems  König HC-PS101 personal scale  メンズシェーバー ES-RL32  Betriebsanleitung  LOVD 3.0 user manual Build 3.0-05  Karcher HDS 2000 User's Manual  Emerson MS9933TT Stereo System User Manual  APRENDER APRENDER  Multi-National Corporations and India: Kabhi Khushi, Kabhi Gham  

Copyright © All rights reserved. Failed to retrieve file