Home

CAM636M User`s Manual (English)

1. NAS Location The location of the Samba network storage including IP address or URL and the folder the event video or snapshot will be send to this location Workgroup Type the work group this Samba network storage belong to User Name Password The user name and password to log in the Samba network storage Auto Create Folder by Date If select Yes a folder will be created under the NAS Location and named with the date and then the video file will be saved in this folder If select No the video file will be saved in the NAS Location without folder After set up click Apply to save the settings Test the Settings You can click Test button this device will send a test mail to receiver s mail box or upload a test file to FTP site and the Samba network storage to make sure the settings of mail FTP or Samba network storage are correct 40 Aisoni PPPoE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection set the parameters in this page PPPoE Setting PPPoE Connection Enable Disable User Name adsluser Password Send E mail after Dialed Enable E mail Subject PPPoE From IP Camera PPPoE Connection Select Enable to use PPP
2. Aisoni Automatic Gain Control Adjust this function according to the environment video Backlight Compensation This device supports Back Light Compensation enable disable this function by selecting ON or OFF AWB Gain Red Adjust the gain level of red color for the automatic white balance AWB Gain Blue Adjust the gain level of blue color for the automatic white balance Frame Rate at Night This function can be set at different Frame rate to increase night illumination Set lower frame rate will slower the frame refresh rate but will enhance the night illumination Night mode will be activated automatically depending on lux illumination if set at 15 frame rate when night mode activated at low lux the frame rate will not be more than 15FPS Video Orientation Change the orientation to display the video Default Click Default button will load the default settings 32 Aisoni Audio Setting This device supports 2 way audio Note the audio will not be smooth when enable SD card recording function simultaneously Audio from Device to Local PC For this device to local PC select Enable and then click Apply to start this function If set to Disable the Voice icon on Live View page is not workable T E 9 gt Enable Disable Audio Setting Audio from Local PC to This Device For local PC to this device click Chatting icon on the Live View page Online Visitor 1
3. 12M IR H 264 2 Mega Pixel 3 Axis CMOS Network Dome CAM646M CAM646M PoE User s Manual Date 7 20 2012 Firmware Version V1 0 32 A 1 Me WP unitaria nn APA 3 2 PIOUUCISPEEGIHTICAloNSs ir 3 di PFOGUCT INS TAN ANION sura aaa 6 A Hardware Installation aerosol lalala ia vere oeste 6 Cane ON ia 6 PENNS A iii 7 SAXIS GMBA PRLS PP eects ai 9 B Monilorselling cid ene wee woo cina 10 C IP ASSIOGNMENE ilaria aaa EI ARIE 4 Live Video Li Gli 13 Di COMMU AUN pricing nn PP 18 SA fe A 18 SE uo A EEE E EEEE EE 18 USerMaRigehehii c n 22 SE 0 E A 24 JA DAS 29 B VIGGO AUdIO SEnNING iaia 26 VACO Fodera 26 Eesti Re E oe cee caceen ee eae E E 31 PV SMM ii pas 33 E ING EOE SCA iste teeta data 34 Network Setting ne 34 MOM AETE ASADA Se VUNG oct 38 PPPOE CUNO IOMA A E E 41 PONS EUO olor It 42 D EVENCHRaSnRGIN diana ai 24 Evento AO RR E EE E E O E E E E E EE 44 EA 50 10101216 A 52 OL 54 6 Network Configuration iaia 57 A MEME OMY A a 57 Connects to PC DI tiene 57 CONSE 58 Db ico AAPP A 59 Connects to ADSL with Fixed Public IP AQUeOSS sisrarsisa ocioso cios 59 Connects to ADSL with Floating Public IP Address PPPOE 60 G Intranet iniernet a lm 62 Connects to Internet with Fixed Public IP Address 62 Connects to Internet with Floating Public IP Address occcoccccocccconcncconoconcno
4. Arrange Icons By Refresh Save As Scheme Graphics Options Display Modes New Properties 2 Change color quality to Highest 32bit Display Properties Themes Desktop Screen Saver Appearance Settings Display Plug and Play Monitor on Intel R 82915G G 910GL Express Chipset Family Screen resolution Color qualit Less J More Highest 32 bit 1024 by 768 pixels ii ni nin 10 Aisoni C IP Assignment gt Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previously assigned IP address gt MAC Address Each network camera has a unique Ethernet address MAC address shown on the sticker of the device gt One final note although the IP Search is able to find and configure any network device on the LAN except those that are behind a router it is a good idea to set the host PC to the same subnet In order to connect to the Web based user interface of the network camera the host PC must be in the same subnet For more information about subnets please consult your network administrator Asoni IP Search is a utility that provides an easier more efficient way to configure the IP address and network settings of the network camera in Local Network LAN The software can be installed from the attached software CD 1 Once Asoni IP Search has been successfully installed on the computer double click the Sear
5. My Network Places Note UPnP service must be enabled on your computer The Windows Vista and Windows 7 have enabled UPnP service by default To activate UPnP service in Windows XP please follow the procedure 1 Open the Control Panel from the Start menu 2 Select Add Remove Programs 3 Select Add Remove Windows Components and open Networking Services section 4 Click Details and select UPnP to setup the service 5 The network device icon will be added to My Network Places 6 You may double click the network device icon to access it via IE browser UPnP Port Forwarding Enable or disable the UPnP Port Forwarding function The UPnP Port Forwarding function provides an easy way to configure the NAT Network Address Translation in router If the router equips UPnP Port Forwarding function too this device will ask the router to open the External HTTP Port and External RTSP Port for this device automatically Therefore you don t need to configure the Port Forwarding manually Note Not all routers equip UPnP Port Forwarding function The device will report whether this function is successful after click Apply button 35 2 isoni RTSP Server Setting RTSP Server The video stream can be direct retrieve via RTSP connection you can close this function by disable this option RTSP Port Set the port for transfer the video and au
6. Streaming 1 v Language Configuration a nmn la Snapshot Record C Network Setting Network Setting DHCP Static IP Network Setting address EA ereere Subnet Mask 299 255 255 0 Gateway 192 168 111 ONS 1 163 95 1 1 DNS 2 163 95 192 1 UPnP Port Forwarding Enable Disable External HTTP Port Ual 509 RTSP Server Enable O Disable RTSP Port 554 RTP Start Port o 1024 9997 RTP End Port 1027 10000 224 3 1 0 239 255 255 255 Port 6000 1 65535 1 255 Port 6001 1 65535 TAL 15 1 255 Aisoni DHCP If this device behinds a router and the router provides DHCP service using DHCP this device will get all network parameters from the router automatically IP Assignment Static Assign IP address subnet mask gateway and DNS manually Port Assignment Set the port if necessary If this device will be connected via Internet configure the NAT Network Address Translation in router to match the port assignment HTTP Port Set the port for HTTP connection The default is 80 change the port if you want to use routers NAT Network Address Translation to make this device can be linked from Internet UPnP Setting UPnP Enable or disable the UPnP protocol This device supports UPnP if the UPnP service is enabled on your computer the device will automatically be detected and a new icon will be added to
7. 121032m avi 192 168 11 50 Event ex NASIP_Address Folder Workgroup WORKGROUP User Name sambatest Password oe Auto Create Folder by Date Yes ex NAS Location 20100115 121032m avi 38 Mail Setting Login Method Account Send Mail Server smtp mailserver com User Name test Sender s Mail sender mailserver com Receiver s Mail receiver abecmail com Mail Port 25 Default Port 25 Login Method This device provides 2 kinds of mail settings Anonymous for the mail server which doesn t need login with user name and password Account for the mail server which needs login with user name and password Send Mail Server The IP address or URL of the send mail server User Name Password The user name and password of the sender to login mail server and send the mail Sender s Mail The sender s mail address Receiver s Mail The receiver s mail address BCC Mail The mail address to receive the mail also Mail Port The port of the mail service Default is 25 FTP Setting FTP Server ftp company com l User Name fiptest Password FTP Port 21 Default Port 21 Store Path j FTP Mode Create the Folder Yes ex Path 20100115 121032m avi FTP Server The IP address or U
8. Run Activex controls and plug ins Q Administrator approved ri Ll Ej Download unsigned Actives controls Disable Enable AA rom eerie bk Li 54 O b 1 4 C hat lt iii Reset custom settings Reset custom settings 5 When popup the following dialogue box click Yes Warning A Are vou sure you want to change the security settings for this zone ves JJ to isoni The web page of the device shows as following If you are using IE 8 0 or above please click Compatibility View icon to make this web page works properly E IP_Camera Windows nternet Explorer a http 192 168 1 200 A ON Online Visitor 1 Streaming 1 Language 2 Configuration F gt xXx f 0 Snapshot Record O Streaming Select the streaming 1 or 2 from the pull down list to display Language Change the display language temporarily Note The display language is changed temporarily for current connection and it doesn t change the default language To change the default language please go to Configuration gt System Information page Configuration Go into the configuration page to set the parameters if necessary Status Bar Shows system date time video resolution and video refresh rate FPS 15 Aisoni Online Visitor Shows how many users connect to this network camera Function Buttons Click these bu
9. Schedule Enable C0 Disable Snapshot W E mail FTP Save to 5D card Save to Samba Interval 10 Second s 1 50000 File Name Snapshot Setup Schedule Select Unselect All Time Click AIl of the top left of the time table to select or 52 Aisoni unselect all time The square in green means the time is selected the square in light grey means the time is unselected Select Unselect Specific Time Click the square of the time table to select or unselect the specific time The square in green means the time is selected the square in light grey means the time is unselected Send Snapshot with Scheduled Time Enable Disable To enable or disable the schedule function Snapshot Select the method to send out the snapshot e E mail Automatic send the snapshot to the specific mail address the interval time of the snapshot pictures is depending on the Interval setting e FIP Automatic send the snapshot to the specific FTP site the interval time of the snapshot pictures is depending on the Interval setting Save to Samba Automatic send the snapshot to the Samba network storage the interval time of the snapshot pictures is depending on the Interval setting To set the mail account FTP site and Samba network storage please refer to Configuration gt Network Setting gt Mail amp FTP page O Save to SD Card Automatic save the snapshot into SD card the interval time of the snapshot pictures is depending on t
10. Time Enable this option will automatic activate the motion detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time 46 Aisoni To ensure the Motion Detection works well and avoid unnecessary trigger please follow the rules to draw the Motion Detection Areas Recommendation of Motion Detection Area The moving object larger than the 50 of the Motion Detection Area it will be detected and the Motion Detection is triggered The moving object smaller than the 50 of the Motion Detection Area it will not be detected and the Motion Detection will not be triggered e Recommend use 3 smaller Motion Detection Areas to replace a large area The moving object smaller than the 50 of the The moving object larger than the 50 of the motion motion area it will not be detected area it will be detected and the motion is triggered To detect the smaller moving object use 3 motion areas to replace a large motion area refer the figure below The moving object will be detected when it is in any of the 3 motion areas and the motion is triggered Record File Setting There are 3 methods to record the event video in SD card or send out via E mail FTP Record Format Video Record time PreAlarm PostAlarm Aisoni Video When an event Motion Detection or Digital Input Detection is triggered the video will be recorded as stil
11. Updating Information update Idle Stop service http lt hostname username gt lt provider gt com DDNS registration successful can now link to the camera with this URL address Update Failed the name is already registered The hostname or username has already been used Please change it 42 Aisoni Update Failed check your internet connection Network connection failed Update Failed please check the account information with you provider The input hostname username or password may be wrong 43 D Event Handling Event Setting This device supports multiple event settings Event Setting Set Area Draw Clear Area l Draw Clear Area2 EN Detect Area 1 V Detect Area 2 Detect Area 3 E mail C FTP C Save to Samba IP Camera Warning 10 sec a period of time between every two motions detected Enable 9 Disable 30 sec Y Record Video into SD Card This device supports 4 kinds of event detections 44 Aisoni Motion Detection Digital Input Detection Network Disconnection Detection This event will be triggered once the wire network is disconnected Specific IP Detection This event will be triggered once the network connection with a specific IP address is disconnected Motion Detection This device allows 3 areas for detect motion When motion detection is triggered it can send the video or snapshot to specific mail address transmit th
12. as NVR or recording software onviF Version l i 3w1o0z Vi01 Disable Security 7 enable 2 Disable RTSP Keepalive Enable Disable Onvif Version Select the version of Onvif standard or disable the Onvif output Security Enable or disable the Onvif security authentication RTSP Keepalive If select Enable when the NVC doesn t send the command for 36 Aisoni keeping the RTSP connection this device will terminate the RTSP connection If select Disable this device will always keep the RTSP connection If the Time out error happens on NVC side please disable this function After set up click Apply to save the settings 37 Mail FTP Samba Setting To send out the event video to E mail FTP or Samba network storage please set up the configuration first Mail FTP Samba A Send Mail Server smtp mailserver com User Name test Password ee Bec Mal boss abemail com Mal Port 235 DefaultPort 25 O FTP Server fip company com User Name fiptest Password we 21 Default Port 21 Store Path i Auto Create Folder by Date Yes ex Path 20100115
13. changes and the input becomes active e 1 setof Relay Output N O COM or N C COM The output to Relay switch of the alarm device such as LEDs Sirens etc Digital Inout Alarm Input GND Ground Initial status is LOW Alarm Max 50mA 12VDC Door Window Contacts Relay Output COM Common pin N O Normally Open Max 1A 24VDC or 0 5A 125VAC N C Normally Close Max 1A 24VDC or 0 5A 125VAC 3 Axis Gimbals Adjustment Aisoni The gimbals adjustment offers the convenience method to install on the ceiling or wall You can open the case and adjust the lens to the direction as wished The pan tilt and rotation adjustments are provided in this model You can adjust the gimbals with Pan 360 Tilt 75 and Rotation 300 respectively Rotation Adjustment 300 1 Loosen Screw 1 2 Adjust Rotation Gimbals as wished 3 Fasten Screw 1 to fix the gimbals Pan Adjustment 360 1 Loosen Screw 2 2 Adjust Pan Gimbals as wished 3 Fasten Screw 2 to fix the gimbals Tilt Adjustment 1 Loosen Screw 3 and Screw 4 2 Adjust Tilt Gimbals as wished 3 Fasten Screw 3 and Screw 4 to fix the gimbals Tilt Gimbals Screw 2 Screw 3 and 4 Pan Gimbals Screw 1 Rotation Gimbals B Monitor Setting 1 Right Click on the desktop Select Properties
14. controls select Enable or Prompt 4 In Security Settings under Initialize and script ActiveX controls not marked as safe select Enable or Prompt 5 When pop up window with warning message click Yes to save the settings 13 A IP CAMERA Microsoft Internet Explorer niernel pone General Security Privacy Content Connections Programe Advanced File Edit View Favorites Ms rea GG 7 Select a Web content zone to specify its security settings Mail and News Back gt Pop up Blocker amp G O Address El htto 192 168 1 2 Manage Add ons Internet li Local intranet Trusted sites Restricted sites poss It Synchronize Internet Windows Update This zone contains all Web sites pou haven t placed in other zones Security level for this zone Windows Messenger Internet Options Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Custom Level Default Level Security Settings Security Settings Settings E Enable EJ Binary and script behaviors Administrator approved Disable Settings gt Disable __ Enable Prompt E Download unsigned ActiveX controls o Disable E Download signed Actives controls __ Enable Disable Enable E Initialize and script Activex controls not marked as safe __ Disable __ Enable j E
15. 1 1 http test dyndns org 3081 a PC2 With audio rtsp test dyndns 0rg 554 3g Camera 1 Without audio Must enable 3GPP 3G Mobile rtsp test dyndns org 554 3gx Stream in Configuration Phone With audio gt Video Audio gt Video rtsp test dyndns org 555 3g Format page Without audio rtsp test dyndns org 555 3gx Camera 2 64 Aisoni 7 Factory Default To recover the default password and other settings please follow the steps 1 Power off this device 2 Remove the cover of device 3 Push the Factory Default Button as shown on the picture below and keeping push it and don t release Factory Default Button 4 Power on the device Don t release the button during the system booting 5 It will take around 30 seconds to boot the device 6 Release the button when the device finishes proceed 7 Re login the device using the default username admin and password admin 8 The IP address is probably restored to the default in this case use IP Search utility to search the device The default IP address is 192 168 1 200 65 Compatible List of SD Card The Compatible List of SD Card Recommended SD Card SanDisk 128M SanDisk 16G SanDisk 256M SanDisk 32G SanDisk 512M Transcend 4G 66
16. 1 5 44 O Manually Input Date and Time Date 2010 6 3 Time 11 1 45 The date and time remain the same Date Format Select the format to display the date Time Zone Select the GMT to match your time zone Enable Daylight Saving If using Daylight Saving enable this option and select the start and end time Synchronize with NTP Server Select this option and type the IP address of a NTP Network Time Protocol server this device will synchronize the time with the NTP server via network NTP Server Type the IP address or URL of the NTP server Update Schedule Select the interval for the update time For example if select 6 Hours this device will synchronize the date and time with the NTP server every 6 hours Synchronize with PC s time Select this option will synchronize the device time with the PC s time Manually Input Date and Time Manually input the date and time 20 Aisoni The date and time remain the same Keep the current date and time without change After set up click Apply to save the settings 21 Aisoni User Management You can add remove and manage the users in this page This device supports 3 user groups Administrator The administrator can view operate and configure all functions and settings of this device Guest The users in Guest group can only view the live video in Live View page Anonymous The anonymous user can only view th
17. 6MB Image Sensor 1 3 CMOS 2 Mega Pixel Lens 1 3 Vari focal 2 7 9mm Mega Pixel lens IR Distance 12 Meters IR LED Built in 18 IR LEDs Illumination Normal 0 5 lux IR On 0 lux Day Night Mechanism IR Cut Filter ICR Video Out 1 Analog video out BNC connector Audio In 1 Microphone in 3 5mm phone jack for connecting external passive type of microphone Audio Out Digital I O 3 Axis Gimbals 1 Line out 3 5mm phone jack for connecting external amplified speaker 1 Digital in 1 Relay out Rotation 300 Pan 360 Tilt 75 Adjustment Normal model DC 12V 1A PoE model built in PoE Splitter Use PoE PoE Injector IEEE 802 3af Or use Power Adaptor DC 12V 1A Max 8 Watt 0132 x H108 4 mm Power Supply Power Consumption Dimensions 10 100 Base T HTTP TCP IP RTP RTSP 3GPP SMTP FTP PPPoE DHCP DDNS NTP UPnP Ethernet Network Protocol System 1600x1200 1280x1024 1280x960 1280x720 800x592 640x480 320x240 176x144 H 264 MJPEG MPEG 4 3GPP only Up to 15FPS 1600x1200 22FPS 1280x1024 25FPS 1280x960 30FPS 1280x720 Yes 2 for live view 1 for 3GPP Video Resolution Compression Format Frame Rate Triple Streaming 3GPP Video Bitrate Adjustment Yes Live view with 3G mobile phone CBR VBR Video Adjustment Brightness Contrast Sharpness BLC Frame Rate at Night Video orientation lt Image Snapshot es Privacy Mask Yes 3 different a
18. Assign a name to identify this video stream When view the video stream with RTSP connection the URL should be rtsp lt Public IP of this device gt lt RTSP port gt lt RTSP path gt 28 3GPP Streaming Output Setting Enable Disable 3g 3GPP Path Link the camera with this address gt rtsp IP 3q Link the camera no audio with this address gt rtsp IF Sax After enable the 3GPP streaming it will enable this device to send out the video in 3GPP format and you can view the live video on the 3G mobile phone since the bandwidth of 3G is not fast usually the 3GPP streaming will be set to the following configuration Resolution Fixed to 176x144 eo Frame Rate Fixed to 5FPS e Video Format Fixed to MPEG4 e Audio Format Fixed to AMR 3GPP Path Assign a name to identify the 3GPP video stream To view the live video with a 3G mobile phone or PDA open Streaming Player or web browser in the mobile phone type the URL as following to link and view the live video rtsp lt Public IP of camera gt lt RTSP port gt lt 3GPP path gt lt Public IP of camera gt The public IP address of the camera lt RTSP port gt The RTSP port of the camera This port is assigned in Configuration gt Network Setting Network Setting lt 3GPP path gt The name of the 3GPP video stream If your 3G mobile phone or PDA does not support the viewing of RTSP streaming you can view
19. Chinese Simplified Chinese MAC Address The MAC address of the Ethernet network card in the device Server Name You can type a name into this field to identify this device Show on Status Bar Determine whether show the server name on the Status Bar LED Indicator Determine whether light on or turn off the network and power status LEDs on the device Default Language Select the default language for the user interface OSD Setting 9 Enable O Disable TopLeft C Top Right BottomLeft Bottom Right Enable C Disable OSD Dis ola Text Edit Time Stamp Enable this option will display the date and time on the video Position Select the display position of Time stamp Text Enable this option will display the OSD string on the video Text Edit Click this button to open Text Edit dialog window You can change the OSD string and adjust the size and alpha of the text After editing click Upgrade button OSD Display 12 100 19 Time Setting Server Time 2010 6 3 11 5 34 Time Zone GMT 08 00 Date Format 9 yy mm dd C mm dd yy dd mmfyy Time Zone GMT 08 00 Enable Daylight Saving Month Day of Week DST Start May Monday DST End August Monday Synchronize with NTP Server NTP Server 198 1273 30 132 Update Schedule 6 Hour Time Shift 0 Minutes 1440 1440 C Synchronize with PC s Time Date 2010 5 3 Time 1
20. Detect El Record Video into SD Card After enable the check box of Record Video into SD Card when the wire network is disconnected it will save the video into local SD card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute 48 Aisoni For the use of recording software this device supports the detection of the connection of this device and PC Whenever the connection is disconnected it records the video to local SD card to make sure the video recording is continuous Specific IP Detection Detect IP Enable Disable IP Address 192 168 1 10 Detection Interval 30sec FrTTrTxcxrerrr z When Dis connected Record Video into SD Card Detect IP Enable Disable Select to enable or disable this function IP Address The IP address or URL of the PC which installed the recording software Detection Interval The interval time of the detection When Dis connected After enable the check box of Record Video into SD Card when the network connection of PC is disconnected it will save the video into local SD card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest
21. RL of the FIP server User Name Password The user name and password to log in the FTP server 39 Aisoni FTP Port The port of the FTP service Default is 21 Store Path The path to save the sent video file FTP Mode Select PORT or PASV to fit the FTP server PORT is for sending file to an Active FTP server PASV is for sending file to a Passive FTP server Auto Create Folder by Date If select Yes a folder will be created under the Store Path and named with the date and then the video file will be saved in this folder If select No the video file will be saved in the Store Path without folder Samba Network Storage Setting Samba is a networking protocol provides file sharing service between network devices If you have a network storage is running Samba service this camera can send the event video or snapshot to the network storage directly NAS Location 1192 168 11 50 Event exc WNAS IP_Address Folder Workgroup WORKGROUP User Name sambatest Password TTT i Auto Create Folder by Date Yes Y ex NAS Location 20100115 121032m avi
22. been configured as the above figure the cameras can be linked with following addresses Clients in Camera Link Address Intranet htip 192 168 1 200 PC ntip1 192 168 1 20 Client from Camera Link Address Internet http 60 220 20 250 3081 PC http 60 220 20 250 3082 With audio Must enable SGPP 3G Mobile Cameri risp 60 220 20 250 554 3g Stream in Configuration Phone Without audio gt Video Audio gt Video rtsp 60 220 20 250 554 3gx Format page With audio rtsp 60 220 20 250 555 3g Camera 2 Without audio rtsp 60 220 20 250 555 3gx Connects to Internet with Floating Public IP Address If the public IP address of ADSL connection is variable you can enable DDNS function to get a fixed URL to instead of the IP address Note only one device can enable the DDNS function in the local network LAN multiple devices use DDNS will update to the DDNS provider too frequently and the DDNS provider will block your URL If the router has DDNS function use router s DDNS function is recommended Please refer to the user s manual of router for the configuration If the router doesn t have DDNS function use one of the cameras DDNS function is recommended Refer to Configuration Network DDNS page to configure and enable the DDNS function After enable the DDNS assume the registered URL is test dyndns org now the cameras can be linked with following URLs Client from Internet Camera
23. ch CAM4_CAM6_NVR6LX icon on the desktop e Search CAM4_CAM6_NVR6L Device List IP Camera 192 168 001 200 IP_Camera 192 168 001 200 IP_Camera 192 168 001 1 Click Search button to Search the IP_Camera 192 168 001 devices IP_Camera 192 168 001 IP Camera 192 168 001 2 Click and select the device on the left IP Camera 192 168 001 ne IP_Camera 192 168 001 IP_Camera 192 168 001 IP_Camera 192 168 001 IP_Camera 192 168 001 4 Click Modify button to setupthe device 3 On the bottom side change the parameters ofthe selected device 5 To connect the device double click the device on the lefi side TS Pude 4 gel fel e 192 168 1 200 HitpPont 80 Ds Fa Device Name IP_Camera Subnet Mask 255 255 255 0 DNS4 168 95 1 1 Search o ne _ Sc y MAC Address 00 0F 0D 23 EF 28 Gateway 192 168 1 254 DNS2 168 95 192 1 Aisoni IP Search searches all the network devices which connect to the intranet and lists on the window Click Search button to search again From the list click and select the device with the MAC Address that corresponds to the device that is to be configured The network configuration of the selected device will show on the bottom filling in the Device Name IP Address Subnet Mask Gateway and the others Click Modify button to save the settings into the device 6 Wait for few seconds to let the device update the settings and then click Searc
24. continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute After set up click Apply to save the settings 49 Aisoni I O Setting This device provides Digital Input and Digital Output When the Digital Input is triggered it can send the video or snapshot to specific mail address transmit the video or snapshot to remote FTP server or Samba network storage trigger the digital out record video or snapshot into local SD card I O Setting Input 1 Sensor Type Input 1 Trigger Action Log mail _ F E Mail Subject GPIO In Detected Dein erick asse _ Enable Digital Input detection based on Schedule Time Output Switch Type C OnOff Switch Time Switch Digital Inout Setting Input 1 Sensor Type Select the type of the sensor which connected to the Digital Input N O means Normally Opened this type of sensor will be triggered when it is closed N C means Normally Closed this type of sensor will be triggered when it is opened Input 1 Trigger Action Select the actions when the Digital Input is triggered e E mail When the Digital Input is triggered send the recorded video or snapshot to the specific mail address eo FTP When the Digital Input is triggered send the recorded video or snapshot to the specific FTP site Save to Samba When the Digital Input is triggered send the recorded video or snapshot to the Samba
25. de of the camera the camera 1 Connect the cable of Digital I O Video output Audio output and Microphone input if you want to use these functionalities 2 Connect Ethernet cable for network connection Aisoni 4 Ifthe camera is PoE model the power adapter is not necessary The camera will get the power from the PoE injector or PoE switch 3 Connect power adapter to turn on the camera PoE Power over Ethernet is a technology that integrates power into a standard LAN infrastructure It enables power to be provided to the network device such as an IP phone or a network camera using the same cable as that used for network connection lt eliminates the need for power outlets at the camera locations Please follow the below figure for the connection PoE Switch or PoE Injector To Network gt Y PoE Network Camera Ethernet Cable Data only Ethernet Cable Mixed data and power 5 Set up the network configurations according to the network environment For further explanation please refer to Network Configuration chapter IYO Connections I O connector used in application for e g motion detection event triggering alarm notifications It provides the interface to isetof Digital Input Alarm GND The digital inputs for connecting devices that can toggle between an open and closed circuit such as PIRs door window contacts glass break detectors etc When a signal is received the status
26. dio The default is 554 change the port if you want to use router s NAT Network Address Translation to make this device can be linked from Internet RTP Port Set the port range of RIP port In RTSP mode you may use TCP and UDP for connecting TCP connection uses RTSP Port UDP connection uses RTP Start and End Port Multicast Setting Based on the RTSP Server Multicast addressing is a network technology for the delivery of streaming to a group of destinations simultaneously using the most efficient strategy to deliver the messages over each link of the network only once creating copies only when the links to the multiple destinations split To implement the Multicast a switch or router that supports Multicast function is necessary in the network If your network supports Multicast you can configure the device to enable this function by setup the following IP Address This is the multicast group address the streaming should be sent to You should configure each recipient with the same multicast group address and receive the streaming from this address The range is 224 3 1 0 239 255 255 255 Port The multicast port The range is 1 65535 TTL Time To Live TTL for Multicast Packets This value decides how far from a sending host a given multicast packet should be forwarded Onvif Setting This device supports Onvif standard you can configure the following settings to compatible with the NVC Network Video Client such
27. e live video in Live View page The privilege is same as Guest group User Management Yes No User Management User Name User Group Modify Remove admin Administrator Edit quest Guest Edit Remove Anonymous User Login To allow user visit this device without login select Yes and then click Setting to enable this function Add User To add a new user type the user name and password then click Add Set to save the user User List This table lists the current users 22 Edit Io change the username and User passwora click Edit and modify the Username admin administrator or user in the pop up window A A Confirm 460040004 Remove To remove the user click Remove 23 Aisoni System Upgrade This page allows user to upgrade firmware restart device and restore the factory default settings Browse Firmware Upgrade The firmware can be upgraded online To update the firmware click Browse to select the new firmware file and then click Upgrade to the procedure Reboot System To restart the device click Reboot and then click Yes on the prompted window Factory Default To load the factory defaults click Default and then click Yes on the prompted window Note all settings including User account Network A V and Event settings will be restored to the factory defaults 24 System Logs System Logs system Stat
28. e video or Snapshot to remote FTP server or Samba network storage trigger the digital out record video or snapshot into local SD card Event Setting A a ed A a Ra N EX FE eae a Co e fe ES EA E A e a Ee F a F la e e A m hu a ae i r F i ie 7 Pu J gt afi a PR L Cag r e A e ata Pe Detect Area 1 W E mail FTP Outi Save to SD card Save to Samba Detect Area 2 e mail WFP louti Save to 5D card Save to Samba Detect Area 3 HlE mail Fre lout Save to SD card Save to Samba Log e mail FTP Save to Samba E Mail Subject IP Camera Warning Detection Interval 10 sec 4 period of time between every two motions detected ID Enable motion detection based on Schedule Time Set the Area To set up or clear the motion area click Draw Clear Area button on 45 Aisoni Set Area row and then use mouse to drag the area on the video Adjust the Sensitivity To adjust the sensitivity of detection select the level from the pull down list Activate Motion Detection To activate the motion detection enable the Detect Area check box Actions when Motion Detection is Trigger Select what actions will be taken once the motion detection Is triggered in each area e E mail When the motion detection is triggered in this area send the recorded video or snapshot to the specific mail address e FIP When the mo
29. h button again to re search the network devices Double click the network device listed on the window It will open an IE browser and connect to this device directly 12 4 Live Video start the IE browser type the IP address of the network camera in the address field http lt IP of camera gt If the HTTP Port has been changed from 80 type the URL as OO G admin http lt IP of camera gt lt HTTP Port gt care im Remember my password Connect to 192 168 1 217 IP Camera After link to the camera it will show a dialogue box Key in the user name and password to log in and open the web page of camera The default user name and password are admin and admin For the first time to view the camera video via IE it will ask you to install the ActiveX component IP CAMERA Microsoft Internet Explorer Fie Edit View Favorites Tools Help orm park q ye 4 G Paige DEI va LA CSch ue x E eo rr Search SY Favorites 4 GT ES S Address 8 http 1192 168 1 217 ig This site might require the Following Actives control Click here to install If the Installation failed please check the security setting for the IE browser 1 In IE click on Tools Internet Options 2 Click on Security Tab gt Custom Level 3 In Security Settings under Download unsigned ActiveX
30. haring IP Address 192 168 1 254 Subnet Mask 255 255 255 0 PC IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Refer to Configuration Network Network page to configure the IP settings Please make sure the IP address of Router PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet e Set Subnet Mask of Router PC and cameras Set Gateway of PC and cameras with the same IP address Usually the Gateway is the IP address of router O Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses http 192 168 1 200 http 192 168 1 201 Aisoni B Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed please refer to the figure below for the connection Internet WAN Camera 3G Mobile Phone IP Address 60 220 20 250 Subnet Mask 255 255 255 0 Gateway 60 220 20 254 Http Port 80 RTSP Port 554 A fosso ADSL Connect the camera to the ADSL modem e Refer to Configuration gt Network gt Network page configure the IP address subnet Mask Gateway and DNS with the settings that ISP provided for ADSL connec
31. he Interval setting Interval The interval time of the snapshot pictures For example if the time set to 10 seconds in the scheduled time the device will send out snapshot every 10 seconds File Name The header of the filename of the snapshot For example if you input Camera in this field the filename of the snapshot will be Camera yyyymmdd hhmmss jpg yyyymmdd indicates the year month and date hhmmss indicates the hour minute and second After set up click Apply to save the settings 93 Aisoni SD Card In this page if a SD Card is inserted you can record the video once an event is triggered play back and manage the recorded files in the SD Card Note The SD card must be formatted as FAT or FAT32 file system The use of the SD Card will affect the operation of this device slightly such as affecting the frame rate of the video Install SD Card Make sure the direction and pushing SD card into the slot completely Record Enable Save to SD Card option in Event Setting or I O Setting page the video can be recorded into the card once the event is triggered When the SD Card is full it will remove the earliest file automatically Playback When open this page the date of recorded files shows 54 Recorded Files in SD Card SD Card lt lt 239M 239M gt gt SD Card Auto Deletion es Keep 1 2 34 days 2010 06 03 Video 113932m avi 113942m av
32. he figure below for the connection Ethernet Cable Camera This device supports Auto MDI MDIX PE IP Address 192 168 1 200 you can use a straight or cross over IP Address 192 168 1 2 Subnet Mask 255 255 255 0 cable to connect these two devices Subnet Mask 255 255 255 0 Gateway Empty Gateway Empty Http Port 80 RTSP Port 554 Connect the camera to PC with Ethernet cable The camera equips an Auto MDI MDIX network connector you can use a straight or cross over Ethernet cable Refer to Configuration Network Network page to configure the IP settings Oo Please make sure the IP address of PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet O Set Subnet Mask of PC and camera Clear the Gateway of PC and camera to empty For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses 9 Aisoni Connects to an Exist LAN If the camera will be used in a local network LAN and don t allow to access via Internet please refer to the figure below for the connection Intranet LAN q aj a Camera 1 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 Camera 2 IP Address 192 168 1 201 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 Connect the cameras to the Switch ae e So or IP S
33. his address gt rtsp IP v2 Enable Disable 3g Link the camera with this address gt rtsp IP 3q Link the camera no audio with this address gt rtsp IP 3gx Aisoni Original Video Select the Original Video from the pull down list The Original Video will affect the selection of Resolution and Video Frame Rate of streaming 1 and 2 please refer to the table below to know the supported resolutions and highest FPS in different Original Video Original Video Original Video 1600x1200 15fps Available Resolution and Highest FPS for Streaming 1 2 Output RE 1600x1200 1280x1024 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x1024 22fps Available Resolution and Highest FPS for Streaming 1 2 Output sE 1280x1024 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x960 25fps Available Resolution and Highest FPS for Streaming 1 2 Output RENOME 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x720 30fps Available Resolution and Highest FPS for Streaming 1 2 Output eam 1280x720 800x592 640x480 320x240 176x144 Original Video 800x600 30fps Resolu Available Resolution and Highest FPS for Streaming 1 2 Output Resolution 800x592 640x480 320x240 176x144 21 Aisoni Video System Select NTSC 60Hz or PAL 50Hz to match your local video system TV Output Select the video system of the analog video output
34. i 1123952m avi 114002m avi 114012m avi 114022m avi 114032m avi 114042m awvwi 114052m avi B a a O A O A O 0 O 114102m a3vi The avi extension name of the file means this file is a video file the jpg extension name means it is a picture file Click the file to start Microsoft Media Player to play it If the bandwidth is lower for playback directly please right click on the file and select Save As to download it to the PC and then play the downloaded file with Microsoft Media Player Note the video format is compressed with H 264 the PC must install the H 264 decoder You can install FFdshow from the included CD for the decoder Delete Recorded File To delete the recorded file check the check box of the file then click Del button Format SD Card If you want to empty the SD card click Format SD Card to format the card To view the recorded files just click the date it will show the list of the recorded files 90 Auto Deletion Recorded Files in SD Card SD Card lt lt 239M 239M gt gt Format SD Card Y Keep 1 2 3 4 days If enable this function the recorded files before the selected day will be deleted automatically After select the option click Apply to save the setting 96 6 Network Configuration A Intranet Only Connects to PC Directly lf you want to connect the camera to PC directly for the very first time setup please refer to t
35. is for setup the parameters of Digital Output Note The following settings are available when manually turn on the Relay Out on Live View page Output Switch Type Select the type of the Digital Output switch On Off Switch will be triggered to On or Off constantly Time Switch will be triggered to On and lasting for a period time and then Off automatically Turn On Time If the Digital Output switch is a Time Switch the lasting time of the On period can be set here After set up click Apply to save the settings 91 soni Schedule This function provides the schedule for the following e Send Snapshot with the Scheduled Time automatic send a snapshot to the E mail address FTP server or Samba network storage or save to SD card The interval time can be set Activate and Stop the Motion Detection with Scheduled Time if the Enable Motion Detection in Schedule Time option in Configuration gt Event Handling gt Event Setting gt Motion Detection page is enabled the motion detection will be activated with scheduled time and stop the detection in the other time e Activate and Stop the Digital Input Detection with Scheduled Time if the Enable Digital Input Detection in Schedule Time option in Configuration gt Event Handling gt I O Setting page is enabled the Digital Input detection will be activated with scheduled time and stop the detection in the other time
36. l image with AVI format The beginning and ending time of the file is depending on the Pre and Post Record Time Setting Snapshots This option is available when the Video Format of streaming 1 is set as JPEG in Video Format When an event Motion Detection or Digital Input Detection is triggered this device will take a series of snapshot with JPG format The beginning and ending time of the snapshot pictures is depending on the Pre and Post Record Time Setting Snapshot Single This option is available when the Video Format of streaming 1 is set as JPEG in Video Format page When an event Motion Detection or Digital Input Detection is triggered this device will take a snapshot with JPG format Pre and Post Record Time Setting Configure the record time for the event recording file For example if set Pre Alarm as 3 seconds and set Post Alarm as 5 seconds when an event Motion Detection or Digital Input Detection is triggered at time 10H 05M 10S the video will be recorded from 10H 05M 07S to 10H 05M 145 Note Limited by the built in RAM of this device when data is too much or video quality set too high it will cause recording frame drop or decrease the recording time of post alarm To avoid the frame drop situation please reduce the bitrate of the video We recommend connect the device in LAN Local Network and set the video as CBR and Bitrate less than 1 5Mbps Network Disconnection
37. nacononcnnnas 64 Te FACION DeIaull cii ia 65 Compatible List of SD Card RATE ORI ce 66 Aisoni 1 Preface This camera is a professional 2 Mega Pixel CMOS network camera which builds in web server User views real time video via IE browser It supports H 264 JPEG and MPEG4 3GPP Only video compression which provides smooth and high quality video The event video can be stored in the SD card and can be playback remotely This camera equips infrared illuminator to provide good image quality even in darkness The PoE model built in support for Power over Ethernet allows the camera to receive both data and power over a single Ethernet cable This camera is an easy to use IP camera which is designed for security application 2 Product Specifications 2 Mega Pixel CMOS Sensor H 264 MJPEG MPEG4 3GPP Only compression formats Supports resolution up to 1600x1200 H 264 MJPEG MPEG4 3GPP Only triple streaming Self Contained HTTP Web Server providing Internet capability for remote access 3 Axis gimbals adjustment Day amp Night functionality for 24 hours surveillance auto activate IR illuminator in low illumination Infrared radiant distance up to 12 meters Built in POE splitter support for Power over Ethernet PoE model Supports SD card for local event recording 2 way audio Online firmware upgrade Recorded files compatible with Microsoft Windows Media Player CPU RAM ROM ARM 9 32 bit RISC 256MB 1
38. network storage To set the mail account FTP site and Samba network storage please refer to Configuration Network Setting gt Mail amp FTP page e Outi When the Digital Input is triggered activate the Digital Output 1 50 Aisoni Save to SD Card When the Digital Input is triggered record the video or snapshot into to SD card Log If Save to SD Card option has been selected for action you can determine whether send a message to the specific mail address FTP site or Samba network storage E Mail Subject The subject of the E mail will be sent Detection Interval This option provides two functions The interval time between multiple detections For example if the time set to 10 seconds when the Digital Input is triggered at time 10H 05M 10S the next trigger will be accepted after 10H 05M 20S The triggers between 10H 05M 10S to 10H 05M 19S will not be accepted e lf the Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the Digital Input is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Digital Input Detection in Schedule Time Enable this option will automatic activate the Digital Input detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time Digital Outout Setting This section
39. oE Type in user name and password for the ADSL Send E mail After Dialed If select Enable when connect to the Internet via PPPoE this device will send a mail with the Subject to a specific mail account this mail contains the public IP address of the ADSL connection To set the mail account please refer to Configuration gt Network Setting Mail8 FTP E mail Subject The subject of the E mail will be sent After set up click Apply to save the settings 41 DDNS Setting This device supports DDNS set the parameters in this page Dynamic DNS Setting DDNS Setting Enable Disable Provider dyndns org Host Name test dyndns org User Name test tt Password sess OOOO Schedule Update 11440 Miutes http test dyndns org Note 1 Schedule Update Depends on the input time of Schedule Update it will update DONS s web site automatically The time range is from 5 to 5000 minutes O It will not update dyndns org amp 3322 0rg Update once per day is recommended 1440 minutes per day If updated too frequently it will be blocked DDNS Setting There are several DDNS providers can be selected Select the provider from the pull down list input Hostname User name Password and the Schedule Update time and then click Apply to connect to the DDNS provider Status This field will display the message to indicate the status of DDNS service
40. ocal network will be connected to Internet with ADSL connection first configure the router or IP sharing with the ADSL connection Please refer to the user s manual of router for the configuration Connect the cameras to the Switch Refer to Configuration Network gt Network page to configure the IP settings Configure the cameras with different IP address Ex assign camera1 to 192 168 1 200 and assign camera2 to 192 168 1 201 Please make sure the IP address of Router PC and cameras are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet 62 Aisoni Set Gateway of PC and cameras with the same IP address The Gateway is the IP address of router e Set Subnet Mask of Router PC and cameras O Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address e Configure the cameras with different RTSP port Ex assign camera with port 554 and assign camera2 with port 555 e To allow the cameras can be linked through Internet set router s NAT Network Address Translation Port Forwarding or Virtual Server as following WAN Side LAN Side Camera Pon Protec 1P Address Pon Protocol 3081 192 168 1 200 Port for Web page Camera 1 ii 554 TCP 192 168 1 200 554 TCP OHIO AERAN Audio 3082 192 168 1 201 80 TCP Port for Web page Camera 2 Port for Vid d ual For example if the IP settings have
41. on the Relay via the built in Digital Out after the interval time is passed the Relay will be turned off automatically The interval time can be set up in Configuration gt Event Handling I O 17 Aisoni 5 Configuration Click Configuration button to get into the configuration page Click Live View button to back to the Live View page A System System Information Set up the camera name select language and set up the camera time System Information MAC Address OO 0F OD 20 08 09 server Name IP Camera Show on Status Bar System Information LED Indicator Default Language Time Stamp 9 Enable Disable OSD_Dis ola Text Edit Server Time 2010 6 3 11 5 34 Time Zone GMT 08 00 Date Format yy mm dd mm dd yy dd mm yy Time Zone GMT 08 00 Enable Daylight Saving Month Week Day of Week Time DST Start Mi Ind Monday 124M y DSTEnd August ast Monday AM y Synchronize with NTP Server NTP Server 198 123 30 132 Update Schedule 6 v ieee Time shits i 1440 1440 O Synchronize with PC s Time Date 20 10 6 3 Time 11 5 44 O Manually Input Date and Time Date 2010 6 3 Time 11 1 45 The date and time remain the same Server Information Se 00 0F 00 20 8 09 Server Name IP Camera Show on Status Bar e LED Indicator a paa Default Language a 0 Traditional
42. ork gt DDNS page to configure and enable the DDNS function 60 Aisoni After enable the DDNS assume the registered URL is test dyndns org now the camera can be linked with following URLs PC http test dyndns org ee With audio Must enable 3GPP Stream in 3G Mobile rtsp test dyndns 0rg 3g Oca configuration gt Video Audio Phone Without audio ud Wades tare rtsp test dyndns org 3gx T ii A OS 61 Aisoni C Intranet Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network LAN and will be accessed via both Intranet and Internet please refer to the figure below for the connection Intranet LAN Internet WAN PEL 3G Mobile Phone IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Camera 1 Gateway 192 168 1 254 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 En Gateway 192 168 1 254 Cosso Http Port 80 i ADSL RTSP Port 554 Public IP 60 220 20 250 To allow the cameras can be linked through Internet set O the NAT Port Forwarding or Virtual Server as following Camera 2 0000 o LAN IP Address 192 168 1 201 Subnet Mask 255 255 255 0 IP Acaress Sun epee ek 192 168 1 200 80 Gateway 192 168 1 254 Router or IP Sharing 192 168 1 200 554 192 168 1 200 Http Port 80 IP Address 192 168 1 254 iii Subnet Mask 255 255 255 0 2335 192 168 1 201 80 I 192 168 1 201 e Assume the l
43. reas Motion Detection Yes 3 different areas Event Trigger Motion Detection Digital In Triggered Action send Email Send to FTP Save to SD Card Relay Out Pre Post Alarm Yes configurable Security Web Browser Microsoft IE V7 0 32 bit or above Mozilla Firefox V6 0 or above Opera V11 5 or above Safari V5 1 or above Google Chrome V13 0 or above Suggested Hardware Intel Core 2 Duo 1 66GHz RAM 1GB Graphic card 128MB onboard RAM Specifications are subject to change without notice 3 Product Installation A Hardware Installation Cable Connections mm LD Power Jack DC 12V GE Digital O T Zin Anal Vid Output a ZA y nalog viaeo Uutpu I T A Red Microphone Input 7 M Green Audio Output Network Connector O Power Jack To connect the DC 12V power adapter Digital I O Digital In and Relay Out Video Output The BNC connector allows connect to the analog display to output analog video for locally monitoring O Microphone Input Red The 3 5mm phone jack allows connect to a passive type of microphone the audio will be heard at the remote site Audio Output Green The 3 5mm phone jack allows connect to an amplified speaker you can hear the voice of the remote site from the speaker O Network Connector The RJ 45 connector allows connect the Ethernet cable Micro SD Card Slot Insert a Micro SD card if you want to do the event recording in insi
44. signal Select Auto will follow the selection in Video System or select NTSC or PAL manually Streaming 1 and 2 Output Setting Basic Advanced Mode Select the mode to configure the parameters Advanced mode provides more detail parameters for setting Resolution Select the resolution from the pull down list Please refer to the above tables for the supported resolutions Frame Rate Per Second The video refreshing rate per second Select the frame rate from the pull down list Refer to the above tables for the supported highest FPS Video Compression Format Choose H 264 or JPEG format to compress and output the video stream H 264 The video stream will be compressed in H 264 format Choose CBR Constant Bit Rate or VBR Variable Bit Rate in Bitrate Control Mode e CBR Set the Video Bitrate from 32Kbps 8Mbps depend on the upload bandwidth of network The data size of video stream will be limited under the selected bit rate VBR Set the Video Quantitative from 1 10 the higher value will get better video quality The data size of video stream is no limitation if the upload bandwidth of network is lower than the data size the video will be displayed slowly e GOP Size Set the GOP Group of Picture size If you don t know what value should be set please set it to 1XFPS JPEG The video stream will be compressed in MJPEG format e Quality 5 levels for select The higher quality will get bigger file size RTSP Path
45. the camera with http connection To do this use a Java compliant browser such as Opera and type the URL as following to link and view the live video http lt Public IP of camera gt lt HTTP port gt Jview html lt Public IP of camera gt The public IP address of the camera lt HTTP port gt The HTTP port of the camera This port is assigned in Configuration gt Network Setting Network Setting Note Do not use the IE browser in 3G mobile phone because it doesn t support Java 29 After set up click Apply to save the settings 30 Image Setting Image Setting Image Setting Draw Clear Areal Draw Clear Areaz Draw Clear Area3 Save rea Settings Brightness 0 la Contrast O Sharpness O Automatic Gain Control Bx Back Light Compensation ON 8 OFF AWB Gain Red 0 AWB Gain Blue CHM SS Frame Rate at Night Max Sframerate 000 Video Orientation F Flip Mirror Privacy Mask For the security purpose there are 3 areas can be setup for privacy masks the masked areas will not be shown in Live View and recorded file To set up or clear the privacy mask click Draw Clear Area button and then use mouse to drag the area on the video After the configuration click Save Area Settings button to save the settings Image Quality Brightness Contrast Sharpness You can adjust these parameters to get clear 31
46. tion For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3g Phone Without audio rtsp 60 220 20 250 3gx Must enable 3GPP Stream in Configuration Video Audio gt Video Format page 59 Aisoni Connects to ADSL with Floating Public IP Address PPPoE If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable the camera can use PPPoE function for the connection Internet WAN I Camera 3G Mobile Phone Configure the PPPoE Setting T a TTT 000000 a ADSL Connect the camera to the ADSL modem Refer to Configuration Network gt PPPoE page to configure the PPPoE settings The camera will automatic dial up and get the public IP address from ISP If you have enable Send Mail After Dialed function the camera will send an email to tell you the current public IP address For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3g Phone Without audio rtsp 60 220 20 250 3gx Must enable 3GPP Stream in Configuration Video Audio gt Video Format page Using DDNS Function Since the public IP address is variable you can enable DDNS function to get a fixed URL to instead of the IP address refer to Configuration Netw
47. tion detection is triggered in this area send the recorded video or snapshot to the specific FTP site Save to Samba When the motion detection is triggered in this area send the recorded video or snapshot to the Samba network storage To set the mail account FTP site and Samba network storage please refer to Configuration Network Setting Mail amp FTP page e Outi When the motion detection is triggered in this area turn on the Digital Output 1 Save to SD Card When the motion detection is triggered in this area record the video or snapshot into the local SD card Log If Save to SD Card option has been selected for action you can determine whether send a message to the specific mail address FTP site or Samba network storage E Mail Subject The subject of the E mail will be sent Detection Interval This option provides two functions The interval time between multiple detections For example if the time set to 10 seconds when the motion detection is triggered at time 10H 05M 10S the next detection will be accepted after 10H 05M 20S The detections between 10H 05M 10S to 10H 05M 19S will not be accepted e lf the Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the motion detection is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Motion Detection in Schedule
48. ttons will perform the following functions Original Size Click this button to display the original size of video Shrink View Click this button to shrink the video to fit the window for view Full Screen Click this button or double click the video the video will change to full screen mode Press Esc key or double click the video again it will back to normal mode Snapshot Click this button to take snapshot of the video The image will be displayed in a pop up window click H to save as a jpg picture Record Click this button to record the video into the local PC It will ask you where to save the video To stop recording click this button again The saved video format is AVI The recorded file can be played by Microsoft Media Player Note H 264 decoder must be installed to play the recorded file You can install FFdshow from the included CD for the decoder Chatting The camera supports 2 way audio Click this button then you can use microphone which connected to the PC to talk to the camera side Voice Click this button to turn on the audio from camera Click again to turn off it Digital Zoom Click this button a pop up window appears You can enable Enable digital zoom disable the digital zoom and adjust the ratio Relay Out ON OFF Switch Click the button to manually turn on off the Relay via the built in Digital Out Relay Out Time Switch Click the button to manually turn
49. us Logs Motion Trigger Logs System Logs Digital In Trigger Logs All Logs System Status Logs Click the View button on the right side to list the logs of system status Motion Trigger Logs Click the View button on the right side to list the logs of motion detection Digital In Trigger Logs Click the View button on the right side to list the logs of digital input detection All Logs Click the View button on the right side to list all logs 25 Aisoni B Video Audio Setting Video Format This device supports H 264 MJPEG and MPEG4 only for 3GPP streaming Triple Mode and Triple Streaming set the video parameters in this page Video Format Original Video 1600x1200 15fps Video System NTSC 60Hz TV Output Auto Auto Based on the Video System Video Format Basic Mode Advanced Mode Resolution 1600x1200 Bitrate Control Mode CBR Constant Bit Rate VBR Variable Bit Rate CER Highest Video Bitrate 1 5Mbps VBR Video Quantitative 7 Frame Rate Per Second 15FPS GOP Size 1xFP5 Bopede Video Compression Format H 264 Audio Format G 711 Link the camera with this address gt rtsp IP Basic Mode Advanced Mode Resolution 1600x1200 Quality High Frame Rate Per Second 15FPS Video Compression Format JPEG vea Audio Format G 711 Link the camera with t

CAM636M User`s Manual (English)

Contents

Download Pdf Manuals

Related Search

Related Contents