Kenmore 116.34722 Vacuum Cleaner User Manual
Contents
1. Before replacing the primary filter it is a good idea to clean the inside of the dust bin and lid area Alignment Tabs Rotate filter clockwise until slots lock onto tabs in lid To re install the filter screen align tabs on filter screen with tabs on lid Rotate filter screen clockwise to lock in place 12 Primary Before replacing the filter it is a good idea to Filter clean the inside of the dust bin and lid area Rotate filter clockwise until slots lock onto tabs in lid NOTE Under normal use and care your fil ter can be expected to last up to 3 years NOTE See Parts and Features for Filter number The secondary filter screen protects the motor Secondary Always check filter screen when cleaning Filter Screen dust bin If dirty or ciogged remove debris from filter screen The exhaust filter removes dirt from recirculated air Check filter after emptying dust bin Replace when dirty To remove press and pull out on both sides of the exhaust filter cover at arrows as shown Grasp the exhaust filter and pull out to remove Exhaust i i Wash the exhaust filter in warm soapy water rinse and dry thoroughly by squeezing the filter in your hand and letting air dry DO NOT wash in the dishwasher Exhaust DO NOT install damp Filter Cover Tabs Reinstall exhaust filter cover by snapping firmly into place 13 Light Lens 14 Ensure ON OFF switch2. e ss eeer eer eeeee uu Attachments e 7 A Attachment Us Chart fea Ea 7 Troubleshooting Mo mb 18 Vacuuming Tips o 8 Requesting service back page Performance Features Please read this guide It will help you assemble ay peers your new Kenmore vacuum in the safest and most effective way For more information about vacuum cleaner care and operation call your nearest Sears store You will need the complete model and serial numbers when requesting information Your vacu um s model and serial numbers are located on the Model and Serial Number Plate Use the space below to record the model number and serial number of your new Kenmore vacuum Model No Serial No Date of Purchase Keep this book and your sales check receipt in a safe place for future reference LIMITED ONE YEAR WARRANTY O ON KENMORE VACUUM CLEANER This warranty is for one year from the date of purchase and includes only private household vacuum cleaner use During the warranty year when this vacuum cleaner is operated and maintained according to the owner s manual instructions Sears will repair any defects in material or workmanship free of charge This warranty excludes vacuum bags belts light bulbs and filters which are expendable parts and become worn during normal use For warranty service return this vacuum cleaner to the nearest Sears Service Center i in the United States This warranty applies onl
3. is OFF Disconnect power cord from electrical outlet Press handle release pedal and rotate the handle down so the cleaner is laying flat on the floor Pry out light lens at slots Remove old bulb from the socket by pulling from socket Replace bulb by pressing into socket Only use a bulb rated 13 V AC 9 Watts Reinstall light lens by snapping into place Return the cleaner to the upright position Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit Failure to do so could result in elec trical shock or personal injury from cleaner suddenly starting Frequently check and remove hair string and lint build up in the brush area If build up becomes excessive follow the steps below Should the belt become loose or should it break follow the Belt Removal Instructions TO REMOVE NOZZLE COVER Disconnect electrical supply Press handle release pedal and rotate the handle down so the cleaner is laying flat on the floor To protect the floor surface always place paper under the nozzle any time the nozzle cover is removed Release the nozzle cover by rotating the nozzle cover retainers to the UNLOCK position Grasp back of nozzle on each side and lift up to remove it from nozzle cover Nozzle Cover Nozzle Cover lt L 15 Carefully remove any residue that may exist in the belt area Personal injury Hazard Always unplug
4. is not in use press Position handle release button and rotate handle counter clockwise for easy storage NOTE You should hear a noticeable click sound when handie reaches the storage position Unplug cord from wall outlet Clean exterior using a clean soft cloth that has been dipped in a solution of mild liquid detergent and water then wrung dry Wipe Do not use attachments if they are dry after cleaning DO NOT drip water on wet Attachments used in dirty areas cleaner such as under a refrigerator should Wash attachments in warm soapy water not be used on other surfaces until rinse and air dry Do not clean in dish they are washed They could leave washer marks Always empty the dust bin when dirt level reaches the MAX FILL line Electrical Shock And Personal Injury Hazard Always unplug power cord from elec trical outlet before performing any service on vacuum TO REMOVE DUST BIN Remove dust bin assembly from cleaner by lifting the release lever as shown Remove dust bin from cleaner by tilting out as shown TO EMPTY DUST BIN Hold dust bin over a trash container Rotate lid counter clockwise from the locked position to the unlocked position as shown Separate the lid from the dust bin by lifting it straight off Empty con tents into a trash con tainer Trash gt Container TO REPLACE DUST BIN LID Place dust bin lid Lid assemb
5. ER CORD Turn vacuum over and inspect agitator area for clogs Secondary Filter Screen Unplug vacuum Remove hose coupling and check hose coupling and hose inlet for clogs Check suction inlet and secondary filter screen for clogs 17 Review this chart to find do it yourself solutions for minor performance problems Any service needed other than those described in this owner s manual should be performed at a Sears service center Electrical Shock Hazard Disconnect electrical supply before servicing or cleaning the unit Failure to do so could result in electrical shock or personal injury PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Cleaner will 1 Unplugged at wall outlet 1 Plug in firmly Push ON OFF not run switch to ON Push ON OFF switch to ON ON OFF switch not turned on 3 Tripped circuit breaker blown t Reset circuit breaker or replace fuse at household service panel fuse Poor job of dirt pickup Full or clogged dust bin Empty dust bin Broken belt Replace belt Clogged hose or nozzle Clean hose or nozzle area Hose not inserted fully Insert hose Worn agitator Replace agitator Hole in hose Replace hose Dust bin assembly Properly install dust bin assembly improperly installed 8 Belt not installed on motor shaft 8 Install belt on motor shaft Dust escap
6. Owner s Manual Manual Del Propietario LATA Vacuum Cleaner Aspiradora Model Modelo 116 34722 116 34723 CAUTION Read and follow all safety and operating instructions before first use of this product CUIDADO Lea y sigua todas las instrucciones de operaci n y seguridad antes del uso de este producto Sears Roebuck and Co Hoffman Estates IL 60179 U S A www sears com Impreso en Mexico Part No C 1ZCGY1 U KC IZCGYZ U Printed in Mexico Before Using Your New Vacuum Vacuum Cleaner Care Kenmore Vacuum Cleaner Warranty 2 Vacuum Storage o oooooooo 9 Important Safety Instructions 3 Cleaning Exterior and Attachments 9 Parts and Features 4 Dust Bin Cleaning ooooooooom 10 4 Dust Bin Assembly 11 erating Instructions 5 ate da 5 Dust Bin Filter Changing Cleaning 12 Using Handle ssscssescseseee 5 Filter Replacement 13 Storing Handle sssese eee 5 Cleaning Secondary Filter Screen 13 Cord Assembly secs oeoo eneon 5 Exhaust Filter Cleaning 13 Using Cord Hook oo 5 Replacing Headlight Bulb 14 Pile Height Selection and Settings 6 Belt Changing and Agitator Cleaning 15 16 On Off Switch 6 Cleaning Exterior o ooo 17 Releasing the Handle 6 Removing HOGS vce
7. TED PILE HEIGHT SETTINGS You may need to raise the height to make some jobs easier such as scatter rugs and longer pile carpets Suggested settings are HIGH shag carpet long pile plush scatter rugs MED medium to long pile LOW short to medium pile EX LOW very low pile pta Ensure ON OFF switch is OFF Plug the power cord into 120V outlet ON position turns vacuum on OFF position turns vacuum off Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand RB ies NC Sree once os Place unit in HIGH when using attach ments to prevent possible floor damage ATTENTION Special care is required when vacuuming certain types of carpet or floor covering Always check the carpet or floor covering manufacturer s recommended cleaning instructions before vacuuming Pile Height Adjustment Lever Personal Injury Hazard To avoid personal injury DO NOT place hands or feet underneath the unit when changing height setting On Off Switch Personal Injury Hazard DO NOT place hands or feet under neath the unit When using the attachments the agitator rotates Do not allow the cleaner to remain in just one place for a period of time as the agitator may damage the floor surface Avoid placing the vacuum on furniture the fringed area of rugs deep pile carpeting or carpeted stairs The ideal positio
8. and Features for Beit Number Loop the other end of belt onto the belt pulley on the right end of agitator 16 Pull right end of agitator forward and seat it into nozzle base y Y Vo A IN II A ETEN Nozzle Base Agitator Press firmly checking to see that each end is completely inserted Agitator Check to see that the belt is centered on the Delt pulley and that the agitator turns freely Nozzle Cover Retainers Make sure the nozzle cover retainers are in the UNLOCK position Hook the front of the nozzle cover on to the nozzle base and rotate downward Once in place rotate the nozzle cover retainers to the LOCK position 2 ES Dey oe ae eee Unplug power cord from wall outlet Clean exterior using a clean soft cloth that has been dipped in a solution of mild liquid detergent and water and wrung dry DO NOT drip water on cleaner and wipe dry after cleaning DO NOT clean tools in dishwasher or clothes washer Wash tools in warm soapy water rinse and air dry DO NOT use tools if they are wet The hose located on the vacuum cleaner carries the dirt from the nozzle up to the dust bin If the hose should become clogged Disconnect wand from connector pipe and nozzle hose check the wand and hose Plug in vacuum cleaner and turn on Suction Inlet Disconnect wand and stretch hose in and Hose Inlet out to remove clog lf clog still exists turn vacuum cleaner OFF and UNPLUG POW
9. cuum unless handle is locked STORING HANDLE To rotate the handle to the storage position when vacuum is not in use press handle release button and rotate handle counter clockwise for easy storage NOTE You should hear a noticeable click sound when handle reaches the storage position Never pull the vacuum cleaner with the handle in the storage position The handle will drag on the floor Carryi Always lift the Handle a vacuum by the carrying handle when transporting to storage CORD ASSEMBLY Make sure the quick release upper cord hook is in the upright position Remove the wire tie from the power cord Make sure the power cord is placed into the locking notch This helps keep the power cord out from under the vacuum cleaner agitator Wrap the power cord around the upper and lower cord hooks and lock the power cord plug onto the power cord USING CORD HOOK Detach plug head from power cord Rotate cord hook down to release cord Return the cord hook to the upright position before attempting to rewind the cord Quick Release Cord Hook Plug Head SOME MODELS To select a pile height setting Turn off cleaner Select a pile height setting by tilting the cleaner back until front wheels are lifted slightly off the floor as illustrated Slide the adjustment lever to the correct setting Models with no selector adjust automatically for varying carpet heights SUGGES
10. es 1 Dust bin assembly 1 Properly install bin the dust bin improperly installed Light will 1 Burned out light bulb 1 Replace light bulb not work 18 Your Home For repair in your home of all major brand appliances lawn and garden equipment or heating and cooling systems no matter who made it no matter who sold it For the replacement parts accessories and owner s manuals that you need to do it yourself For Sears professional installation of home appliances and items like garage door openers and water heaters 4 800 4 MY HOME Anytime day or night 1 800 469 4663 U S A and Canada www sears com www sears ca Our Home For repair of carry in products like vacuums lawn equipment and electronics call or go on line for the nearest Sears Parts and Repair Center 1 800 488 1222 Anytime day or night U S A only www sears com To purchase a protection agreement U S A or maintenance agreement Canada on a product serviced by Sears 1 800 827 6655 U S A 1 800 361 6665 Canada Para pedir servicio de reparaci n Au Canada pour service en francais a domicilio y para ordenar piezas 1 800 LE FOYER 41 B88 SU HOGAR 1 800 533 6937 1 888 784 6427 WWW sears ca SEARS Sears Roebuck and Co Registered Trademark Trademark Service Mark of Sears Roebuck and Co Marca Registrada Marca de F brica M Marca de Se
11. ly back onto top of dust bin Align marks with bin marks as shown Rotate lid clockwise while pressing downward so that marks align as shown TO REPLACE DUST BIN First align base of dust bin with the vacuum Then rotate dust bin in place mak ing sure dust bin is securely latched Dust Bin Sl 11 Lid The Lid houses the filter Filter Filter traps dirt and debris that is picked up by the suction motor Filter Screen The filter screen traps larger particles of dirt and debris from reaching the filter Dust Bin Captures dirt and debris picked up from the suction moter RINE Check primary filter frequently and clean when dirty Remove the dust bin assembly as outlined in the DUST BIN CLEANING section and empty contents of dust bin Make sure dust bin is empty before filter is removed Grasp filter screen rotate counter clockwise and lift out Screen Grasp primary filter rotate counter clockwise and lift out Clean primary filter by gently tapping over a trash container Tap on several sides to ensure best cleaning Rinse with water only as needed The filter may be cleaned by tapping it on a firm surface or by rinsing it under a faucet Rinse with water only do not use detergent or soap Allow filter to dry 24 hours before putting it back into the dust bin When the cleaning of the filter no longer restores vacuum suction to full power you need to replace the filter
12. n for the cleaner when using attach ments is for the unit to be on a level area with the handle in the FULL UPRIGHT position TO USE ATTACHMENTS Place the cleaner on a flat surface The hose can be pulled off the nozzle hose by grasping the cuff and twisting while pulling up The attachments can be added to the hose if the item to be cleaned is not far from the cleaner DO NOT pull the vacuum cleaner around the room by the hose Property damage could result sath aea aon ATTACHMENT DUSTING BRUSH WY x eveT A The motor protector may open when using attachments or when cleaning new carpet due to reduced air flow by the attachments themselves or by new carpet fuzz filling the bag quickly Always clean attachments before using on fabrics Between Cushions If more reach is needed the wand can be attached to the hose and the attachments can be added to the wand When using attachments be careful not to overextend the hose length when reaching Trying to reach beyond the hose reach could cause the cleaner to tip over If the dusting brush is being used and more distance is needed the crevice tool can be added to the wand then the dusting brush can be added to the crevice tool Crevice Tool Wand Dusting Brush TO STORE ATTACHMENTS Return the hose to its position on the nozzle hose and the attachments to their holders Attachments used in dirty areas such as under a refrige
13. not allow to be used as a toy Close attention is necessary when used by or near children Do not handie plug or cleaner with wet hands Do not put any objects into openings Do not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Keep hair loose clothing fingers and ail parts of body away from openings and moving parts Do not use cleaner without dust bin and or filters in place Always clean the dust bin after vacuum ing carpet cleaners or freshener pow ders and fine dust These products clog the filters reduce airflow and can cause damage to the cleaner Failure to clean the dust bin could cause permanent damage to the cleaner Do not use the cleaner to pick up sharp hard objects small toys pins paper clips etc They may damage the cleaner or dust bin Do not pick up anything that is burning or smoking such as cigarettes matches or hat ashes Do not use cleaner to pick up flammable or combustible liquids gasoline cleaning fluids perfumes etc or use in areas where they may be present The fumes from these substances can create a fire hazard or explosion Use extra care when cleaning on stairs Do not put on chairs tables etc Keep on floor You are responsible for making sure that your vacuum cleaner is not used by any one unable to operate it properly SAVE THESE INSTRUCTIONS Proper assembly and safe use of your vacuum cleaner are your
14. rator should not be used on other surfaces until they are washed They could leave marks CLEANING AREA Carpet edges Guide either side or the front of the nozzle along a baseboard The full width agitator brushes help remove dirt at carpet edges Note When using attachments make sure the cleaner is in the upright position Personal injury Hazard Use care if vacuum cleaner is placed on stairs If it falls personal injury or property damage could ce MOTOR PROTECTOR This vacuum has a motor protector by pass valve which automatically opens to provide cooling air to the motor when a clog prevents the normal flow of air to the motor If the by pass valve opens to prevent motor overheating and possible damage to the vacuum you will notice a change of sound as air rushes through the valve opening Protector lt 7 Motor i NOTE Do not block motor protector M To correct problem See the TROUBLE SHOOTING chart NOTE The motor protector may open when using attachments or when cleaning new carpet due to reduced airflow by the attachments themselves or by new carpet fuzz filling the dust bin quickly See the TROUBLESHOOTING section Electrical Shock And Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit Failure to do so could result in elec trical shock or personal injury from cleaner suddenly starting THERMAL PROTECTOR This vacuum has a the
15. responsibilities Your cleaner is intended only for household use Read this Owners Manual carefully for important use and safety information This guide contains safety statements under warning and caution symbols Please pay special attention to these boxes and follow any instructions given WARNING statements alert you to such dangers as fire electrical shock burns and personal injury CAU TION statements alert you to such dangers as personal injury and or property damage Itis important to know your vacuum Part No i cleaner s parts and features to assure its proper and safe use Review these before using your cleaner In Canada 20 5275 20 5275C ATTACHMENTS Dusting Brush Cord Hook Handle i E Handle Carrying Handle Release Button Wands On Off Switch 1 Motor Kk gt Pro tector Handle Release Peda Exhaust Filter Inside fa Headlight OPERATING INSTRUCTIONS AS USING HANDL To release handle press handle release button as shown With release button depressed rotate handle clockwise to the operating position Once handle reaches the operating position up the handle will automatically lock into place A Operating i Position Int Storage Position NOTE You should hear a noticeable click sound when handle reaches the operating position NOTE Make sure the handle is locked in the operating position before using vacuum DO NOT operate va
16. rmal protector which automatically trips to protect the vacuum from overheating If a clog prevents the normal flow of air to the motor the thermal protector turns the motor off automatically to allow the motor to cool in order fo prevent possible damage to the vacuum During this time the headlight remains on To correct problem If this occurs turn the vacuum off and unplug the power cord from the outlet to allow the vacuum to cool and the thermal protector to reset Check for and remove clogs if necessary Also check and clean replace any clogged filters Wait approximately thirty 30 minutes and plug the vacuum in and turn back on to see if the motor protector has reset The motor protector will not reset if the vacuum is not turned off even if the vacuum has cooled down VACUUM CLEANER CARE Always follow all safety precautions when cleaning and servicing the vacuum cleaner Electrical Shock And Personal injury Hazard Disconnect electrical supply before servicing or cleaning the unit Failure to do so could result in elec trical shock or personal injury from cleaner suddenly starting Operating is Position IA Electrical Shock And Personal Injury Hazard Wrapping the cord too tightly puts stress on the cord and can cause cord damage A damaged cord is an electrical shock hazard and could cause personal injury or damage To rotate the handle to the storage Storage position when vacuum
17. rvicio de Sears Roebuck and Co MC Marque de commerce M9 Marque d pos e de Sears Roebuck and Co
18. the vacuum cleaner before cleaning the brush area as agitator may suddenly restart Failure to do so can result in per sonal injury TO REMOVE BELT CLEAN AGITATOR SA a mee Or eke a e Agitator Position hands on the agitator If the belt is still attached to the agitator there will be tension on it Carefully lift the right end of the agitator and then lift the left end Remove the worn or broken belt from the motor drive shaft Personal Injury Hazard Be careful when removing the agita tor as the belt tension is high Failure to do so could result in per sonal injury from the agitator releas ing quickly and snapping away Remove the agitator to check for string and hair build up NOTE In order to keep cleaning efficiency high and to prevent damage to your vacu um the agitator must be cleaned every time the belt is changed The agitator must also be cleaned accord ing to the following schedule Vacuum Use Clean Agitator HEAVY every week used daily MODERATE every month used 2 3 times week LIGHT every 2 months used 1time week Cut off any carpet pile hair or lint entangled around the agitator and remove any string or debris located near the end caps TO REPLACE BELT Seat left end of agitator into nozzle base To seat agitator end place rounded portion of agi tator end cap down into slot in nozzle base Loop the new belt on the motor shaft NOTE See Parts
19. y while this product is in use in the United States This warranty gives you specific legal rights and you may also have other rights which vary from state to state Sears Roebuck and Co D 817 WA Hoffman Estates IL 60179 2 IMPORTANT SAFETY INSTRUCTIONS YIN WARNING Your safety is important to us To reduce the risk of fire electrical shock injury to persons or damage when using your vacuum cleaner follow basic safety pre cautions including the following Read this manual before assembling or using your vacuum cleaner Use your cleaner only as described in this manual Use only with Sears recom mended attachments To reduce the risk of electrical shock Do not use outdoors or on wet surfaces Disconnect electrical supply before any servicing or cleaning Failure to do so could result in electrical shock or person al injury Always turn cleaner off before unplug ging Do not unplug by pulling on cord To unplug grasp the plug not the cord Do not use with damaged cord or plug If cleaner is not working as it should has been dropped damaged left outdoors or dropped into water return it to a Sears Service Center Do not pull or carry by cord use cord as a handle close door on cord or pull cord around sharp edges or corners Do not run cleaner over cord Keep cord away from heated surfaces Do not leave cleaner when plugged in Unplug from outlet when not in use and before servicing Do
Download Pdf Manuals
Related Search